Age | Commit message (Collapse) | Author |
|
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dan, who's working on C++ YNL, pointed out that the C code
does not make policies const. Sprinkle some 'const's around.
Reported-by: Dan Melnic <dmm@meta.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
491aee894a08 ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391dc ("net: use unrcu_pointer() helper")
b01e1c030770 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
|
|
Without this, the 'i' variable declared before could be overridden by
accident, e.g.
for i in "${@}"; do
__ksft_status_merge "${i}" ## 'i' has been modified
foo "${i}" ## using 'i' with an unexpected value
done
After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.
Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.
The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.
Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.
Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Moreover, it allows to mimic the real life setup with for example bridge
having the same MAC address on each port.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-2-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-05
We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).
The main changes are:
1) Fix a potential use-after-free in bpf_link_free when the link uses
dealloc_deferred to free the link object but later still tests for
presence of link->ops->dealloc, from Cong Wang.
2) Fix BPF test infra to set the run context for rawtp test_run callback
where syzbot reported a crash, from Jiri Olsa.
3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
it for the case of !CONFIG_FPROBE, also from Jiri Olsa.
4) Fix a Coverity static analysis report to not close() a link_fd of -1
in the multi-uprobe feature detector, from Andrii Nakryiko.
5) Revert support for redirect to any xsk socket bound to the same umem
as it can result in corrupted ring state which can lead to a crash when
flushing rings. A different approach will be pursued for bpf-next to
address it safely, from Magnus Karlsson.
6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.
7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
be NULL, from Thorsten Blum.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
Revert "xsk: Document ability to redirect to any socket bound to the same umem"
Revert "xsk: Support redirect to any socket bound to the same umem"
bpf: Set run context for rawtp test_run callback
bpf: Fix a potential use-after-free in bpf_link_free()
bpf, devmap: Remove unnecessary if check in for loop
libbpf: don't close(-1) in multi-uprobe feature detector
bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================
Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
|
|
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.
Fixes: eafbf0574e05 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings in several tests and fixes to ftrace tests"
* tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/futex: don't pass a const char* to asprintf(3)
selftests/futex: don't redefine .PHONY targets (all, clean)
selftests/tracing: Fix event filter test to retry up to 10 times
selftests/futex: pass _GNU_SOURCE without a value to the compiler
selftests/overlayfs: Fix build error on ppc64
selftests/openat2: Fix build warnings on ppc64
selftests: cachestat: Fix build warnings on ppc64
tracing/selftests: Fix kprobe event name test for .isra. functions
selftests/ftrace: Update required config
selftests/ftrace: Fix to check required event file
kselftest/alsa: Ensure _GNU_SOURCE is defined
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Compile fix for cxl-test from missing linux/vmalloc.h
- Fix for memregion leaks in devm_cxl_add_region()
* tag 'cxl-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Fix memregion leaks in devm_cxl_add_region()
cxl/test: Add missing vmalloc.h for tools/testing/cxl/test/mem.c
|
|
Add a selftest which checks that the sysctl is present in a netns,
that the value is read from the init one, and that it's readonly.
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20240530232722.45255-3-technoboy85@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
|
|
Guard close(link_fd) with extra link_fd >= 0 check to prevent close(-1).
Detected by Coverity static analysis.
Fixes: 04d939a2ab22 ("libbpf: detect broken PID filtering logic for multi-uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529231212.768828-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recent kernel change ([0]) changed inet_csk_accept() prototype. Adapt
progs/test_sk_storage_tracing.c to take that into account.
[0] 92ef0fd55ac8 ("net: change proto and proto_ops accept type")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240528223218.3445297-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang issues this warning:
futex_requeue_pi.c:403:17: warning: passing 'const char **' to parameter
of type 'char **' discards qualifiers in nested pointer types
[-Wincompatible-pointer-types-discards-qualifiers]
This warning fires because test_name is passed into asprintf(3), which
then changes it.
Fix this by simply removing the const qualifier. This is a local
automatic variable in a very short function, so there is not much need
to use the compiler to enforce const-ness at this scope.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: f17d8a87ecb5 ("selftests: fuxex: Report a unique test name per run of futex_requeue_pi")
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The .PHONY targets "all" and "clean" are both already defined in the
file that is included in the very next line:
../lib.mk.
Remove this duplicate code.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Commit eb50d0f250e9 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250e9 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Folks working on a C++ codegen would like to reuse the attribute
helpers directly. Add the few necessary casts, it's not too ugly.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240529192031.3785761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's slightly better to set _GNU_SOURCE in the source code, but if one
must do it via the compiler invocation, then the best way to do so is
this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
|
|
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The generated .rst has pre and post headings without any values, e.g.
here:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#device-id-get
Emit keys and values in the generated .rst
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Generate op flags as an inline list instead of a stringified python
value.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The doc strings for do/dump ops are emitted as toplevel .rst constructs
so they can be multi-line. Pass multi-line text straight through to the
.rst to retain any simple formatting from the .yaml
This fixes e.g. list formatting for the pin-get docs in dpll.yaml:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#pin-get
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the newline replacement in ynl-gen-rst.py to put spaces between
concatenated lines. This fixes the broken doc string formatting.
See the dpll docs for an example of broken concatenation:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#lock-status
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix build error on ppc64:
dev_in_maps.c: In function ‘get_file_dev_and_inode’:
dev_in_maps.c:60:59: error: format ‘%llu’ expects argument of type
‘long long unsigned int *’, but argument 7 has type ‘__u64 *’ {aka ‘long
unsigned int *’} [-Werror=format=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix warnings like:
test_cachestat.c: In function ‘print_cachestat’:
test_cachestat.c:30:38: warning: format ‘%llu’ expects argument of
type ‘long long unsigned int’, but argument 2 has type ‘__u64’ {aka
‘long unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e3548236d ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update required config options for running all tests.
This also sorts the config entries alphabetically.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca3d ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The pcmtest driver tests use the kselftest harness which requires that
_GNU_SOURCE is defined but nothing causes it to be defined. Since the
KHDR_INCLUDES Makefile variable has had the required define added let's
use that, this should provide some futureproofing.
Fixes: daef47b89efd ("selftests: Compile kselftest headers with -D_GNU_SOURCE")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes: b5b73b26b3ca ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit b5b73b26b3ca ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes: 09dbdf28f9f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4ccf ("tools/testing/cxl: Introduce a mock memory device + driver")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debug kernel config is being used.
It looks like this issue is sometimes present with the NetDev CI. While
this is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel, and if a debug kernel config is
being used.
It looks like this issue is often present with the NetDev CI. While this
is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-3-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs, it is important to have a
simple way to mark subtests as flaky, and ignore the errors. This is
what this patch introduces: subtests can be marked as flaky by setting
MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g.
MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest>
The subtest will be executed, and errors (if any) will be ignored. It is
still good to run these subtests, as it exercises code, and the results
can still be useful for the on-going investigations.
Note that the MPTCP CI will continue to track these flaky subtests by
setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket
has to be created before marking subtests as flaky.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-1-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Verifier enforces that only certain program types can mutate sock{map,hash}
maps, that is update it or delete from it. Add test coverage for these
checks so we don't regress.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
|
|
The hsr_ping test reports the following errors:
INFO: preparing interfaces for HSRv0.
INFO: Initial validation ping.
INFO: Longer ping test.
INFO: Cutting one link.
INFO: Delay the link and drop a few packages.
INFO: All good.
INFO: preparing interfaces for HSRv1.
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
Error: ipv4: Address already assigned.
Error: ipv6: address already assigned.
INFO: Initial validation ping.
That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f6714
("test: hsr: Remove script code already implemented in lib.sh").
This patch fixes it by re-setup the namespaces using
setup_ns ns1 ns2 ns3
command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.
Fixes: 680fda4f6714 ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|