summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-02-22cpupower: Move print_speed function into misc helperHuang Rui
The print_speed can be as a common function, and expose it into misc helper header. Then it can be used on other helper files as well. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Enable boost state support for AMD P-State moduleHuang Rui
The legacy ACPI hardware P-States function has 3 P-States on ACPI table, the CPU frequency only can be switched between the 3 P-States. While the processor supports the boost state, it will have another boost state that the frequency can be higher than P0 state, and the state can be decoded by the function of decode_pstates() and read by amd_pci_get_num_boost_states(). However, the new AMD P-State function is different than legacy ACPI hardware P-State on AMD processors. That has a finer grain frequency range between the highest and lowest frequency. And boost frequency is actually the frequency which is mapped on highest performance ratio. The similar previous P0 frequency is mapped on nominal performance ratio. If the highest performance on the processor is higher than nominal performance, then we think the current processor supports the boost state. And it uses amd_pstate_boost_init() to initialize boost for AMD P-State function. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add AMD P-State sysfs definition and access helperHuang Rui
Introduce the marco definitions and access helper function for AMD P-State sysfs interfaces such as each performance goals and frequency levels in amd helper file. They will be used to read the sysfs attribute from AMD P-State cpufreq driver for cpupower utilities. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Introduce ACPI CPPC libraryHuang Rui
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc library in below path: /sys/devices/system/cpu/cpuX/acpi_cppc/ And these attributes will be used for AMD P-State driver to provide some performance and frequency values. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add the function to get the sysfs value from specific tableHuang Rui
Expose the helper into cpufreq header, then cpufreq driver can use this function to get the sysfs value if it has any specific sysfs interfaces. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Initial AMD P-State capabilityHuang Rui
If kernel starts the AMD P-State module, the cpupower will initial the capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State capability is set, it won't need to set legacy ACPI relative capabilities anymore. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add the function to check AMD P-State enabledHuang Rui
The processor with AMD P-State function also supports legacy ACPI hardware P-States feature as well. Once driver sets AMD P-State eanbled, the processor will respond the finer grain AMD P-State feature instead of legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled() to check whether the current kernel enables AMD P-State or AMD CPUFreq module. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22cpupower: Add AMD P-State capability flagHuang Rui
Add AMD P-State capability flag in cpupower to indicate AMD new P-State kernel module support on Ryzen processors. Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22testptp: add option to shift clock by nanosecondsMaciek Machnikowski
Add option to shift the clock by a specified number of nanoseconds. The new argument -n will specify the number of nanoseconds to add to the ptp clock. Since the API doesn't support negative shifts those needs to be calculated by subtracting full seconds and adding a nanosecond offset. Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-22perf data: Don't mention --to-ctf if it's not supportedMahmoud Mandour
The option `--to-ctf` is only available when perf has libbabeltrace support. Hence, on error, we shouldn't state that user must include `--to-ctf` unless it's supported. The only user-visible change for this commit is that when `perf` is not configured to support libbabeltrace, the user is only prompted to provide the `--to-json` option instead of bothe `--to-json` and `--to-ctf`. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220220113952.138280-1-ma.mandourr@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22perf script: Fix error when printing 'weight' fieldGerman Gomez
In SPE traces the 'weight' field can't be printed in 'perf script' because the 'dummy:u' event doesn't have the WEIGHT attribute set. Use evsel__do_check_stype(..) to check this field, as it's done with other fields such as "phys_addr". Before: $ perf record -e arm_spe_0// -- sleep 1 $ perf script -F event,ip,weight Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field. After: $ perf script -F event,ip,weight l1d-access: 12 ffffaf629d4cb320 tlb-access: 12 ffffaf629d4cb320 memory: 12 ffffaf629d4cb320 Fixes: b0fde9c6e291e528 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT") Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22perf data: Adding error message if perf_data__create_dir() failsAlexey Bayduraev
Add proper return codes for all cases of data directory creation failure and add error message output based on these codes. Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220222091417.11020-1-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 3915035282573c5e ("KVM: x86: SVM: move avic definitions from AMD's spec to svm.h") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-02-22 17:35:36.996271430 -0300 +++ after 2022-02-22 17:35:46.258503347 -0300 @@ -287,6 +287,7 @@ [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", + [0xc001011b - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SVM_AVIC_DOORBELL", [0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o CC /tmp/build/perf/util/amd-sample-raw.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=AMD64_SVM_AVIC_DOORBELL && msr<=AMD64_SEV_ES_GHCB" Using CPUID AuthenticAMD-25-21-0 0xc001011b 0xc0010130 New filter for msr:read_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629) 0xc001011b 0xc0010130 New filter for msr:write_msr: (msr>=0xc001011b && msr<=0xc0010130) && (common_pid != 1019953 && common_pid != 3629) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/YhVKxaft+z8rpOfy@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22perf data: Fix double free in perf_session__delete()Alexey Bayduraev
When perf_data__create_dir() fails, it calls close_dir(), but perf_session__delete() also calls close_dir() and since dir.version and dir.nr were initialized by perf_data__create_dir(), a double free occurs. This patch moves the initialization of dir.version and dir.nr after successful initialization of dir.files, that prevents double freeing. This behavior is already implemented in perf_data__open_dir(). Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22libbpf: Remove redundant check in btf_fixup_datasec()Yuntao Wang
The check 't->size && t->size != size' is redundant because if t->size compares unequal to 0, we will just skip straight to sorting variables. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220220072750.209215-1-ytcoode@gmail.com
2022-02-22Merge tag 'kvm-s390-next-5.18-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Changes for 5.18 part1 - add Claudio as Maintainer - first step to do proper storage key checking - testcase for missing memop check
2022-02-22linkage: remove SYM_FUNC_{START,END}_ALIAS()Mark Rutland
Now that all aliases are defined using SYM_FUNC_ALIAS(), remove the old SYM_FUNC_{START,END}_ALIAS() macros. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-5-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22x86: clean up symbol aliasingMark Rutland
Now that we have SYM_FUNC_ALIAS() and SYM_FUNC_ALIAS_WEAK(), use those to simplify the definition of function aliases across arch/x86. For clarity, where there are multiple annotations such as EXPORT_SYMBOL(), I've tried to keep annotations grouped by symbol. For example, where a function has a name and an alias which are both exported, this is organised as: SYM_FUNC_START(func) ... asm insns ... SYM_FUNC_END(func) EXPORT_SYMBOL(func) SYM_FUNC_ALIAS(alias, func) EXPORT_SYMBOL(alias) Where there are only aliases and no exports or other annotations, I have not bothered with line spacing, e.g. SYM_FUNC_START(func) ... asm insns ... SYM_FUNC_END(func) SYM_FUNC_ALIAS(alias, func) The tools/perf/ copies of memset_64.S and memset_64.S are updated likewise to avoid the build system complaining these are mismatched: | Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' | diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S | Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' | diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-4-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()Mark Rutland
Currently aliasing an asm function requires adding START and END annotations for each name, as per Documentation/asm-annotations.rst: SYM_FUNC_START_ALIAS(__memset) SYM_FUNC_START(memset) ... asm insns ... SYM_FUNC_END(memset) SYM_FUNC_END_ALIAS(__memset) This is more painful than necessary to maintain, especially where a function has many aliases, some of which we may wish to define conditionally. For example, arm64's memcpy/memmove implementation (which uses some arch-specific SYM_*() helpers) has: SYM_FUNC_START_ALIAS(__memmove) SYM_FUNC_START_ALIAS_WEAK_PI(memmove) SYM_FUNC_START_ALIAS(__memcpy) SYM_FUNC_START_WEAK_PI(memcpy) ... asm insns ... SYM_FUNC_END_PI(memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_END_ALIAS(__memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_END_ALIAS_PI(memmove) EXPORT_SYMBOL(memmove) SYM_FUNC_END_ALIAS(__memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_START(name) It would be much nicer if we could define the aliases *after* the standard function definition. This would avoid the need to specify each symbol name twice, and would make it easier to spot the canonical function definition. This patch adds new macros to allow us to do so, which allows the above example to be rewritten more succinctly as: SYM_FUNC_START(__pi_memcpy) ... asm insns ... SYM_FUNC_END(__pi_memcpy) SYM_FUNC_ALIAS(__memcpy, __pi_memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy) SYM_FUNC_ALIAS(__memmove, __pi_memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_ALIAS_WEAK(memmove, __memmove) EXPORT_SYMBOL(memmove) The reduction in duplication will also make it possible to replace some uses of WEAK with more accurate Kconfig guards, e.g. #ifndef CONFIG_KASAN SYM_FUNC_ALIAS(memmove, __memmove) EXPORT_SYMBOL(memmove) #endif ... which should make it easier to ensure that symbols are neither used nor overidden unexpectedly. The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are marked as deprecated, and will be removed once existing users are moved over to the new scheme. The tools/perf/ copy of linkage.h is updated to match. A subsequent patch will depend upon this when updating the x86 asm annotations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3Nicholas Piggin
Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL resource mode to 3 with the H_SET_MODE hypercall. This capability differs between processor types and KVM types (PR, HV, Nested HV), and affects guest-visible behaviour. QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and use the KVM CAP if available to determine KVM support[2]. Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21selftests/bpf: Add test for reg2btf_ids out of bounds accessKumar Kartikeya Dwivedi
This test tries to pass a PTR_TO_BTF_ID_OR_NULL to the release function, which would trigger a out of bounds access without the fix in commit 45ce4b4f9009 ("bpf: Fix crash due to out of bounds access into reg2btf_ids.") but after the fix, it should only index using base_type(reg->type), which should be less than __BPF_REG_TYPE_MAX, and also not permit any type flags to be set for the reg->type. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220220023138.2224652-1-memxor@gmail.com
2022-02-21iio: introduce mag_referencedCosmin Tanislav
Some accelerometers that support activity and inactivity events also support a referenced mode, in which the gravitational acceleration is taken as a point of reference before comparing the acceleration to the specified activity and inactivity magnitude. For example, in the case of the ADXL367, for activity detection, the formula is: abs(acceleration - reference) > magnitude Add a new event type that makes this behavior clear. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220214073810.781016-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21bonding: add new option ns_ip6_targetHangbin Liu
This patch add a new bonding option ns_ip6_target, which correspond to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS request to determine the health of the link. For other related options like the validation, we still use arp_validate, and will change to ns_validate later. Note: the sysfs configuration support was removed based on https://lore.kernel.org/netdev/8863.1645071997@famine Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21selftests: fib_test: Add a test case for IPv4 broadcast neighboursIdo Schimmel
Test that resolved neighbours for IPv4 broadcast addresses are unaffected by the configuration of matching broadcast routes, whereas unresolved neighbours are invalidated. Without previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [FAIL] TEST: Unresolved neighbour for network broadcast address [FAIL] Tests passed: 2 Tests failed: 2 With previous patch: # ./fib_tests.sh -t ipv4_bcast_neigh IPv4 broadcast neighbour tests TEST: Resolved neighbour for broadcast address [ OK ] TEST: Resolved neighbour for network broadcast address [ OK ] TEST: Unresolved neighbour for broadcast address [ OK ] TEST: Unresolved neighbour for network broadcast address [ OK ] Tests passed: 4 Tests failed: 0 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21Merge tag 'v5.17-rc5' into sched/core, to resolve conflictsIngo Molnar
New conflicts in sched/core due to the following upstream fixes: 44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n") a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled") Conflicts: include/linux/psi_types.h kernel/sched/psi.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-02-21tools/cgroup/slabinfo: update to work with struct slabRoman Gushchin
After the introduction of the dedicated struct slab to describe slab pages by commit d122019bf061 ("mm: Split slab into its own type") and the following removal of the corresponding struct page's fields by commit 07f910f9b729 ("mm: Remove slab from struct page") the memcg_slabinfo tool broke. An attempt to run it produces a trace like this: Traceback (most recent call last): File "/usr/bin/drgn", line 33, in <module> sys.exit(load_entry_point('drgn==0.0.16', 'console_scripts', 'drgn')()) File "/usr/lib64/python3.9/site-packages/drgn/internal/cli.py", line 133, in main runpy.run_path(args.script[0], init_globals=init_globals, run_name="__main__") File "/usr/lib64/python3.9/runpy.py", line 268, in run_path return _run_module_code(code, init_globals, run_name, File "/usr/lib64/python3.9/runpy.py", line 97, in _run_module_code _run_code(code, mod_globals, init_globals, File "/usr/lib64/python3.9/runpy.py", line 87, in _run_code exec(code, run_globals) File "memcg_slabinfo.py", line 226, in <module> main() File "memcg_slabinfo.py", line 199, in main cache = page.slab_cache AttributeError: 'struct page' has no member 'slab_cache' The problem can be fixed by explicitly casting struct page * to struct slab * for slab pages. The tools works as expected with this fix, e.g.: cred_jar 776 776 192 21 1 : tunables 0 0 0 : slabdata 547 547 0 kmalloc-cg-32 6 6 32 128 1 : tunables 0 0 0 : slabdata 9 9 0 files_cache 3 3 832 39 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-512 1 1 512 32 4 : tunables 0 0 0 : slabdata 10 10 0 task_struct 10 10 6720 4 8 : tunables 0 0 0 : slabdata 63 63 0 mm_struct 3 3 1664 19 8 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-cg-16 1 1 16 256 1 : tunables 0 0 0 : slabdata 8 8 0 pde_opener 1 1 40 102 1 : tunables 0 0 0 : slabdata 8 8 0 anon_vma_chain 375 375 64 64 1 : tunables 0 0 0 : slabdata 81 81 0 radix_tree_node 3 3 584 28 4 : tunables 0 0 0 : slabdata 419 419 0 dentry 98 98 312 26 2 : tunables 0 0 0 : slabdata 1420 1420 0 btrfs_inode 3 3 2368 13 8 : tunables 0 0 0 : slabdata 730 730 0 signal_cache 3 3 1600 20 8 : tunables 0 0 0 : slabdata 17 17 0 sighand_cache 3 3 2240 14 8 : tunables 0 0 0 : slabdata 20 20 0 filp 90 90 512 32 4 : tunables 0 0 0 : slabdata 95 95 0 anon_vma 214 214 200 20 1 : tunables 0 0 0 : slabdata 162 162 0 kmalloc-cg-1k 1 1 1024 32 8 : tunables 0 0 0 : slabdata 22 22 0 pid 10 10 256 32 2 : tunables 0 0 0 : slabdata 14 14 0 kmalloc-cg-64 2 2 64 64 1 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-96 3 3 96 42 1 : tunables 0 0 0 : slabdata 8 8 0 sock_inode_cache 5 5 1408 23 8 : tunables 0 0 0 : slabdata 29 29 0 UNIX 7 7 1920 17 8 : tunables 0 0 0 : slabdata 21 21 0 inode_cache 36 36 1152 28 8 : tunables 0 0 0 : slabdata 680 680 0 proc_inode_cache 26 26 1224 26 8 : tunables 0 0 0 : slabdata 64 64 0 kmalloc-cg-2k 2 2 2048 16 8 : tunables 0 0 0 : slabdata 9 9 0 v2: change naming and count_partial()/count_free()/for_each_slab() signatures to work with slabs, suggested by Matthew Wilcox Fixes: 07f910f9b729 ("mm: Remove slab from struct page") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Roman Gushchin <guro@fb.com> Tested-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/linux-patches/Yg2cKKnIboNu7j+p@carbon.DHCP.thefacebook.com/
2022-02-21x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCEPeter Zijlstra (Intel)
The RETPOLINE_AMD name is unfortunate since it isn't necessarily AMD only, in fact Hygon also uses it. Furthermore it will likely be sufficient for some Intel processors. Therefore rename the thing to RETPOLINE_LFENCE to better describe what it is. Add the spectre_v2=retpoline,lfence option as an alias to spectre_v2=retpoline,amd to preserve existing setups. However, the output of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed. [ bp: Fix typos, massage. ] Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2022-02-21memblock tests: Add memblock_free testsKarolina Drobnik
Add checks for removing a region from reserved memory in different scenarios: - The requested region matches one in the collection of reserved memory regions - The requested region does not exist in memblock.reserved - The region overlaps with one of the entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/30af95c82754ad8029404c3b528a5ef1c05d1ed6.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_add_node testKarolina Drobnik
Add a simple test for NUMA-aware variant of memblock_add function. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/e2d0e6dd264c8c169242b556f7c5b12153f3dee5.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_remove testsKarolina Drobnik
Add checks for removing a region from available memory in different scenarios: - The requested region matches one in the collection of available memory regions - The requested region does not exist in memblock.memory - The region overlaps with one of the entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/8e6aa005407bbe1a75b75e85ac04ebb51318a52a.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_reserve testsKarolina Drobnik
Add checks for marking a region as reserved in different scenarios: - The region does not overlap with existing entries - The region overlaps with one of the previous entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region - The same region is marked as reserved twice Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/cac867d2b6c17e53d9e977b5d6cd88cc4e9453b6.1643796665.git.karolinadrobnik@gmail.com
2022-02-21memblock tests: Add memblock_add testsKarolina Drobnik
Add checks for adding a new region in different scenarios: - The region does not overlap with existing entries - The region overlaps with one of the previous entries: from the top (its end address is bigger than the base of the existing region) or from the bottom (its base address is smaller than the end address of one of the regions) - The region is within an already defined region - The same region is added twice to the collection of available memory regions Add checks for memblock initialization to verify it sets memblock data structures to expected values. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/b6c26525025bccec0bf7419473d4d1293eb82b3b.1643796665.git.karolinadrobnik@gmail.com
2022-02-20Merge tag 'fs.mount_setattr.v5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull mount_setattr test/doc fixes from Christian Brauner: "This contains a fix for one of the selftests for the mount_setattr syscall to create idmapped mounts, an entry for idmapped mounts for maintainers, and missing kernel documentation for the helper we split out some time ago to get and yield write access to a mount when changing mount properties" * tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: add kernel doc for mnt_{hold,unhold}_writers() MAINTAINERS: add entry for idmapped mounts tests: fix idmapped mount_setattr test
2022-02-20selftests/bpf: Fix btfgen testsAndrii Nakryiko
There turned out to be a few problems with btfgen selftests. First, core_btfgen tests are failing in BPF CI due to the use of full-featured bpftool, which has extra dependencies on libbfd, libcap, etc, which are present in BPF CI's build environment, but those shared libraries are missing in QEMU image in which test_progs is running. To fix this problem, use minimal bootstrap version of bpftool instead. It only depend on libelf and libz, same as libbpf, so doesn't add any new requirements (and bootstrap bpftool still implementes entire `bpftool gen` functionality, which is quite convenient). Second problem is even more interesting. Both core_btfgen and core_reloc reuse the same set of struct core_reloc_test_case array of test case definitions. That in itself is not a problem, but btfgen test replaces test_case->btf_src_file property with the path to temporary file into which minimized BTF is output by bpftool. This interferes with original core_reloc tests, depending on order of tests execution (core_btfgen is run first in sequential mode and skrews up subsequent core_reloc run by pointing to already deleted temporary file, instead of the original BTF files) and whether those two runs share the same process (in parallel mode the chances are high for them to run in two separate processes and so not interfere with each other). To prevent this interference, create and use local copy of a test definition. Mark original array as constant to catch accidental modifcations. Note that setup_type_id_case_success() and setup_type_id_case_success() still modify common test_case->output memory area, but it is ok as each setup function has to re-initialize it completely anyways. In sequential mode it leads to deterministic and correct initialization. In parallel mode they will either each have their own process, or if core_reloc and core_btfgen happen to be run by the same worker process, they will still do that sequentially within the worker process. If they are sharded across multiple processes, they don't really share anything anyways. Also, rename core_btfgen into core_reloc_btfgen, as it is indeed just a "flavor" of core_reloc test, not an independent set of tests. So make it more obvious. Last problem that needed solving was that location of bpftool differs between test_progs and test_progs' flavors (e.g., test_progs-no_alu32). To keep it simple, create a symlink to bpftool both inside selftests/bpf/ directory and selftests/bpf/<flavor> subdirectory. That way, from inside core_reloc test, location to bpftool is just "./bpftool". v2->v3: - fix bpftool location relative the test_progs-no_alu32; v1->v2: - fix corruption of core_reloc_test_case. Fixes: 704c91e59fe0 ("selftests/bpf: Test "bpftool gen min_core_btf") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yucong Sun <sunyucong@gmail.com> Link: https://lore.kernel.org/bpf/20220220042720.3336684-1-andrii@kernel.org
2022-02-20memblock tests: Add memblock reset functionKarolina Drobnik
Memblock simulator needs to be able to reset memblock data structures between different test cases. Add a function that sets all fields to their default values. Add a test checking if memblock is being initialized to expected values. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
2022-02-20memblock tests: Add skeleton of the memblock simulatorKarolina Drobnik
Add basic project files, together with local stubs of required headers. Update tools/include/slab.h to include definitions used by memblock. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/d296fceb023a04b316a31fbff9acf1e76ac684e4.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add debugfs.h stubKarolina Drobnik
Add a dummy debugfs.h header. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/80fceff27934094873cc3f0656d22e802dfcce78.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add pfn.h stubKarolina Drobnik
Add a stubbed pfn header with definitions used in testing. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/1bdc02125963f945bf90dd8cb37c404cc0688af2.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add io.h stubKarolina Drobnik
Add a dummy io.h header. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/3e8d42cbd01382d956d393cf3bb2a6d639dfdd97.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add cache.h stubKarolina Drobnik
Add a dummy version of the cache header. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/5e02865094aaf56dd30772722799e53f4130ebc8.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add mm.h fileKarolina Drobnik
Add a stubbed mm.h file with dummy page-related definitions, memory alignment and physical to virtual address conversions, so they can be used in testing. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/e8b83d96fec95f3556e80f001d9d5cbe18b8ad5f.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Update atomic definitionsKarolina Drobnik
Add atomic_long_set function to atomic.h and atomic_long_t type to types.h so they can be used in testing. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/082fde69debc36bfc56cdb413d847dcd6b1e36dd.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add _RET_IP_ and math definitions to kernel.hKarolina Drobnik
Add max_t, min_t and clamp functions, together with _RET_IP_ definition, so they can be used in testing. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/230fea382cb1e1659cdd52a55201854d38a0a149.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools/include: Add phys_addr_t to types.hKarolina Drobnik
Update types.h file to include phys_addr_t typedef so it can be used in testing. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/f0b42be7d1fe2eb9cd299532676d9df2df9ef089.1643796665.git.karolinadrobnik@gmail.com
2022-02-20tools: Move gfp.h and slab.h from radix-tree to libKarolina Drobnik
Merge radix-tree definitions from gfp.h and slab.h with these in tools/lib, so they can be used in other test suites. Fix style issues in slab.h. Update radix-tree test files. Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com> Signed-off-by: Mike Rapoport <rppt@kernel.org> Link: https://lore.kernel.org/r/b76ddb8a12fdf9870b55c1401213e44f5e0d0da3.1643796665.git.karolinadrobnik@gmail.com
2022-02-19selftests/bpf: Fix a clang deprecated-declarations compilation errorYonghong Song
Build the kernel and selftest with clang compiler with LLVM=1, make -j LLVM=1 make -C tools/testing/selftests/bpf -j LLVM=1 I hit the following selftests/bpf compilation error: In file included from test_cpp.cpp:3: /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:73:8: error: 'relaxed_core_relocs' is deprecated: libbpf v0.6+: field has no effect [-Werror,-Wdeprecated-declarations] struct bpf_object_open_opts { ^ test_cpp.cpp:56:2: note: in implicit move constructor for 'bpf_object_open_opts' first required here LIBBPF_OPTS(bpf_object_open_opts, opts); ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:77:3: note: expanded from macro 'LIBBPF_OPTS' (struct TYPE) { \ ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:90:2: note: 'relaxed_core_relocs' has been explicitly marked deprecated here LIBBPF_DEPRECATED_SINCE(0, 6, "field has no effect") ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:24:4: note: expanded from macro 'LIBBPF_DEPRECATED_SINCE' (LIBBPF_DEPRECATED("libbpf v" # major "." # minor "+: " msg)) ^ /.../tools/testing/selftests/bpf/tools/include/bpf/libbpf_common.h:19:47: note: expanded from macro 'LIBBPF_DEPRECATED' #define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg))) There are two ways to fix the issue, one is to use GCC diagnostic ignore pragma, and the other is to open code bpf_object_open_opts instead of using LIBBPF_OPTS. Since in general LIBBPF_OPTS is preferred, the patch fixed the issue by adding proper GCC diagnostic ignore pragmas. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220217194005.2765348-1-yhs@fb.com
2022-02-19selftests: mptcp: be more conservative with cookie MPJ limitsPaolo Abeni
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19selftests: mptcp: more robust signal race testPaolo Abeni
The in kernel MPTCP PM implementation can process a single incoming add address option at any given time. In the mentioned test the server can surpass such limit. Let the setup cope with that allowing a faster add_addr retransmission. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254 Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19selftests: mptcp: improve 'fair usage on close' stabilityPaolo Abeni
The mentioned test has to wait for a subflow creation failure. The current code looks for TCP sockets in TW state and sometimes misses the relevant event. Switch to a more stable check, looking for the associated mib counter. Fixes: 46e967d187ed ("selftests: mptcp: add tests for subflow creation failure") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257 Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19selftests: mptcp: fix diag instabilityPaolo Abeni
Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258 Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 19:42:02 +0000