summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-04-19selftests/bpf: Limit unroll_count for pyperf600 testYonghong Song
LLVM commit [1] changed loop pragma behavior such that full loop unroll is always honored with user pragma. Previously, unroll count also depends on the unrolled code size. For pyperf600, without [1], the loop unroll count is 150. With [1], the loop unroll count is 600. The unroll count of 600 caused the program size close to 298k and this caused the following code is generated: 0: 7b 1a 00 ff 00 00 00 00 *(u64 *)(r10 - 256) = r1 ; uint64_t pid_tgid = bpf_get_current_pid_tgid(); 1: 85 00 00 00 0e 00 00 00 call 14 2: bf 06 00 00 00 00 00 00 r6 = r0 ; pid_t pid = (pid_t)(pid_tgid >> 32); 3: bf 61 00 00 00 00 00 00 r1 = r6 4: 77 01 00 00 20 00 00 00 r1 >>= 32 5: 63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1 6: bf a2 00 00 00 00 00 00 r2 = r10 7: 07 02 00 00 fc ff ff ff r2 += -4 ; PidData* pidData = bpf_map_lookup_elem(&pidmap, &pid); 8: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 10: 85 00 00 00 01 00 00 00 call 1 11: bf 08 00 00 00 00 00 00 r8 = r0 ; if (!pidData) 12: 15 08 15 e8 00 00 00 00 if r8 == 0 goto -6123 <LBB0_27588+0xffffffffffdae100> Note that insn 12 has a branch offset -6123 which is clearly illegal and will be rejected by the verifier. The negative offset is due to the branch range is greater than INT16_MAX. This patch changed the unroll count to be 150 to avoid above branch target insn out-of-range issue. Also the llvm is enhanced ([2]) to assert if the branch target insn is out of INT16 range. [1] https://reviews.llvm.org/D119148 [2] https://reviews.llvm.org/D123877 Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220419043230.2928530-1-yhs@fb.com
2022-04-18selftests/bpf: Refactor prog_tests logging and test executionMykola Lysenko
This is a pre-req to add separate logging for each subtest in test_progs. Move all the mutable test data to the test_result struct. Move per-test init/de-init into the run_one_test function. Consolidate data aggregation and final log output in calculate_and_print_summary function. As a side effect, this patch fixes double counting of errors for subtests and possible duplicate output of subtest log on failures. Also, add prog_tests_framework.c test to verify some of the counting logic. As part of verification, confirmed that number of reported tests is the same before and after the change for both parallel and sequential test execution. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
2022-04-18selftests: mlxsw: Introduce devlink line card ↵Jiri Pirko
provision/unprovision/activation tests Introduce basic line card manipulation which consists of provisioning, unprovisioning and activation of a line card. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17Merge tag 'x86-urgent-2022-04-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two x86 fixes related to TSX: - Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX to cover all CPUs which allow to disable it. - Disable TSX development mode at boot so that a microcode update which provides TSX development mode does not suddenly make the system vulnerable to TSX Asynchronous Abort" * tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsx: Disable TSX development mode at boot x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
2022-04-17net/ipv6: Introduce accept_unsolicited_na knob to implement router-side ↵Arun Ajith S
changes for RFC9131 Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge tag 'linux-kselftest-fixes-5.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "A mqueue perf test memory leak bug fix. mq_perf_tests failed to call CPU_FREE to free memory allocated by CPU_SET" * tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
2022-04-14perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1KAthira Rajeev
The 'perf bench numa' testcase fails on systems with more than 1K CPUs. Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1 Snippet of code: <<>> perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed. Aborted (core dumped) <<>> bind_to_node() uses "sched_getaffinity" to save the original cpumask and this call is returning EINVAL ((invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size. Apart from fixing this for "orig_mask", apply same logic to "mask" as well which is used to setaffinity so that mask size is large enough to represent number of possible CPU's in the system. sched_getaffinity is used in one more place in perf numa bench. It is in "bind_to_cpu" function. Apply the same logic there also. Though currently no failure is reported from there, it is ideal to change getaffinity to work with such system configurations having CPU's more than default mask size supported by glibc. Also fix "sched_setaffinity" to use mask size which is large enough to represent number of possible CPU's in the system. Fixed all places where "bind_cpumask" which is part of "struct thread_data" is used such that bind_cpumask works in all configuration. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf bench: Fix numa testcase to check if CPU used to bind task is onlineAthira Rajeev
Perf numa bench test fails with error: Testcase: ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk Failure snippet: <<>> Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed. <<>> The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list", There is check to see if cpu number is greater than max cpu's possible in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {". But it could happen that system has say 48 CPU's, but only number of online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is 48, so function will go ahead and set bit for CPU 8 also in cpumask ( td->bind_cpumask). bind_to_cpumask function is called to set affinity using sched_setaffinity and the cpumask. Since the CPU8 is not present, set affinity will fail here with EINVAL. Fix this issue by adding a check to make sure that, CPU's provided in the input argument values are online before proceeding further and skip the test. For this, include new helper function "is_cpu_online" in "tools/perf/util/header.c". Since "BIT(x)" definition will get included from header.h, remove that from bench/numa.c Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf record: Fix per-thread optionAlexey Bayduraev
Per-thread mode doesn't have specific CPUs for events, add checks for this case. Minor fix to a pr_debug by Ian Rogers <irogers@google.com> to avoid an out of bound array access. Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Alexey Bayduraev <alexey.bayduraev@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220414014642.3308206-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13perf tools: Fix segfault accessing sample_id xyarrayAdrian Hunter
perf_evsel::sample_id is an xyarray which can cause a segfault when accessed beyond its size. e.g. # perf record -e intel_pt// -C 1 sleep 1 Segmentation fault (core dumped) # That is happening because a dummy event is opened to capture text poke events accross all CPUs, however the mmap logic is allocating according to the number of user_requested_cpus. In general, perf sometimes uses the evsel cpus to open events, and sometimes the evlist user_requested_cpus. However, it is not necessary to determine which case is which because the opened event file descriptors are also in an xyarray, the size of whch can be used to correctly allocate the size of the sample_id xyarray, because there is one ID per file descriptor. Note, in the affected code path, perf_evsel fd array is subsequently used to get the file descriptor for the mmap, so it makes sense for the xyarrays to be the same size there. Fixes: d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf") Fixes: 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org # 5.5+ Link: https://lore.kernel.org/r/20220413114232.26914-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()Lv Ruyi
hashmap__new() returns ERR_PTR(-ENOMEM) when it fails, so we should use IS_ERR() to check it in error handling path. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220413093302.2538128-1-lv.ruyi@zte.com.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-13tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-neededHerton R. Krzesinski
Build of intel-speed-select will fail if you run: $ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1 ... gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select /usr/bin/ld: intel-speed-select-in.o: in function `handle_event': (...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr' ... In this case the problem is that order when linking matters when using the flag -Wl,--as-needed, symbols not used at that point are discarded. So since intel-speed-select-in.o comes after, at that point the libraries/symbols are already discarded and then missing/undefined references are reported. To fix this, make sure we specify LDFLAGS after the object file. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-13selftests: net: fib_rule_tests: add support to select a test to runAlaa Mohamed
Add boilerplate test loop in test to run all tests in fib_rule_tests.sh Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13perf tools: Fix misleading add event PMU debug messageAdrian Hunter
Fix incorrect debug message: Attempting to add event pmu 'intel_pt' with '' that may result in non-fatal errors which always appears with perf record -vv and intel_pt e.g. perf record -vv -e intel_pt//u uname The message is incorrect because there will never be non-fatal errors. Suppress the message if the PMU is 'selectable' i.e. meant to be selected directly as an event. Fixes: 4ac22b484d4c79e8 ("perf parse-events: Make add PMU verbose output clearer") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86: - Miscellaneous bugfixes - A small cleanup for the new workqueue code - Documentation syntax fix RISC-V: - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c ARM: - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits) KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU KVM: SVM: Do not activate AVIC for SEV-enabled guest Documentation: KVM: Add SPDX-License-Identifier tag selftests: kvm: add tsc_scaling_sync to .gitignore RISC-V: KVM: include missing hwcap.h into vcpu_fp KVM: selftests: riscv: Fix alignment of the guest_hang() function KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put() selftests: KVM: Free the GIC FD when cleaning up in arch_timer selftests: KVM: Don't leak GIC FD across dirty log test iterations KVM: Don't create VM debugfs files outside of the VM directory KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3) KVM: avoid NULL pointer dereference in kvm_dirty_ring_push KVM: arm64: selftests: Introduce vcpu_width_config KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs KVM: arm64: vgic: Remove unnecessary type castings KVM: arm64: Don't split hugepages outside of MMU write lock KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32 KVM: arm64: Generally disallow SMC64 for AArch32 guests ...
2022-04-12testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu setAthira Rajeev
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate CPU set. This cpu set is used further in pthread_attr_setaffinity_np and by pthread_create in the code. But in current code, allocated cpu set is not freed. Fix this issue by adding CPU_FREE in the "shutdown" function which is called in most of the error/exit path for the cleanup. There are few error paths which exit without using shutdown. Add a common goto error path with CPU_FREE for these cases. Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-12selftests: forwarding: new test, verify host mdb entriesJoachim Wiberg
Boiler plate for testing static mdb entries. This first test verifies adding and removing host mdb entries for all supported types: IPv4, IPv6, and MAC multicast. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11libbpf: Usdt aarch64 arg parsing supportAlan Maguire
Parsing of USDT arguments is architecture-specific. On aarch64 it is relatively easy since registers used are x[0-31] and sp. Format is slightly different compared to x86_64. Possible forms are: - "size@[reg[,offset]]" for dereferences, e.g. "-8@[sp,76]" and "-4@[sp]"; - "size@reg" for register values, e.g. "-4@x0"; - "size@value" for raw values, e.g. "-8@1". Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1649690496-1902-2-git-send-email-alan.maguire@oracle.com
2022-04-11selftests: kvm: add tsc_scaling_sync to .gitignoreLike Xu
The tsc_scaling_sync's binary should be present in the .gitignore file for the git to ignore it. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20220406063715.55625-3-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-11selftests/bpf: Drop duplicate max/min definitionsGeliang Tang
Drop duplicate macros min() and MAX() definitions in prog_tests and use MIN() or MAX() in sys/param.h instead. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1ae276da9925c2de59b5bdc93b693b4c243e692e.1649462033.git.geliang.tang@suse.com
2022-04-11selftests/mptcp: add diag listen testsFlorian Westphal
Check dumping of mptcp listener sockets: 1. filter by dport should not return any results 2. filter by sport should return listen sk 3. filter by saddr+sport should return listen sk 4. no filter should return listen sk Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Replace unnecessary list_for_each_entry_continue() in nf_tables, from Jakob Koschel. 2) Add struct nf_conntrack_net_ecache to conntrack event cache and use it, from Florian Westphal. 3) Refactor ctnetlink_dump_list(), also from Florian. 4) Bump module reference counter on cttimeout object addition/removal, from Florian. 5) Consolidate nf_log MAC printer, from Phil Sutter. 6) Add basic logging support for unknown ethertype, from Phil Sutter. 7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil. 8) Replace hardcode value in nft_bitwise, from Jeremy Sowden. 9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names, also from Jeremy. 10) nft_fib support for reverse path filtering with policy-based routing on iif. Extend selftests to cover for this new usecase, from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11selftests: netfilter: add fib expression forward test caseFlorian Westphal
Its now possible to use fib expression in the forward chain (where both the input and output interfaces are known). Add a simple test case for this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-10tools/runqslower: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao
Explicitly set libbpf 1.0 API mode, then we can avoid using the deprecated RLIMIT_MEMLOCK. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409125958.92629-5-laoar.shao@gmail.com
2022-04-10bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. libbpf_set_strict_mode always return 0, so we don't need to check whether the return value is 0 or not. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409125958.92629-4-laoar.shao@gmail.com
2022-04-10selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCKYafang Shao
We have switched to memcg-based memory accouting and thus the rlimit is not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in libbpf for backward compatibility, so we can use it instead now. After this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be removed. This patch also removes the useless header sys/resource.h from many files in tools/testing/selftests/bpf/. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409125958.92629-3-laoar.shao@gmail.com
2022-04-10libbpf: Fix a bug with checking bpf_probe_read_kernel() support in old kernelsRunqing Yang
Background: Libbpf automatically replaces calls to BPF bpf_probe_read_{kernel,user} [_str]() helpers with bpf_probe_read[_str](), if libbpf detects that kernel doesn't support new APIs. Specifically, libbpf invokes the probe_kern_probe_read_kernel function to load a small eBPF program into the kernel in which bpf_probe_read_kernel API is invoked and lets the kernel checks whether the new API is valid. If the loading fails, libbpf considers the new API invalid and replaces it with the old API. static int probe_kern_probe_read_kernel(void) { struct bpf_insn insns[] = { BPF_MOV64_REG(BPF_REG_1, BPF_REG_10), /* r1 = r10 (fp) */ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8), /* r1 += -8 */ BPF_MOV64_IMM(BPF_REG_2, 8), /* r2 = 8 */ BPF_MOV64_IMM(BPF_REG_3, 0), /* r3 = 0 */ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_probe_read_kernel), BPF_EXIT_INSN(), }; int fd, insn_cnt = ARRAY_SIZE(insns); fd = bpf_prog_load(BPF_PROG_TYPE_KPROBE, NULL, "GPL", insns, insn_cnt, NULL); return probe_fd(fd); } Bug: On older kernel versions [0], the kernel checks whether the version number provided in the bpf syscall, matches the LINUX_VERSION_CODE. If not matched, the bpf syscall fails. eBPF However, the probe_kern_probe_read_kernel code does not set the kernel version number provided to the bpf syscall, which causes the loading process alwasys fails for old versions. It means that libbpf will replace the new API with the old one even the kernel supports the new one. Solution: After a discussion in [1], the solution is using BPF_PROG_TYPE_TRACEPOINT program type instead of BPF_PROG_TYPE_KPROBE because kernel does not enfoce version check for tracepoint programs. I test the patch in old kernels (4.18 and 4.19) and it works well. [0] https://elixir.bootlin.com/linux/v4.19/source/kernel/bpf/syscall.c#L1360 [1] Closes: https://github.com/libbpf/libbpf/issues/473 Signed-off-by: Runqing Yang <rainkin1993@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409144928.27499-1-rainkin1993@gmail.com
2022-04-10selftests/bpf: Improve by-name subtest selection logic in prog_testsMykola Lysenko
Improve subtest selection logic when using -t/-a/-d parameters. In particular, more than one subtest can be specified or a combination of tests / subtests. -a send_signal -d send_signal/send_signal_nmi* - runs send_signal test without nmi tests -a send_signal/send_signal_nmi*,find_vma - runs two send_signal subtests and find_vma test -a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* - runs 2 send_signal test and find_vma test. Disables two send_signal nmi subtests -t send_signal -t find_vma - runs two *send_signal* tests and one *find_vma* test This will allow us to have granular control over which subtests to disable in the CI system instead of disabling whole tests. Also, add new selftest to avoid possible regression when changing prog_test test name selection logic. Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
2022-04-10libbpf: Add ARC support to bpf_tracing.hVladimir Isaev
Add PT_REGS macros suitable for ARCompact and ARCv2. Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220408224442.599566-1-geomatsi@gmail.com
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Denis Nikitin <denik@chromium.org> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lexi Shao <shaolexi@huawei.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Denis Nikitin <denik@chromium.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix futex bench to correct usage of affinity for machines with ↵Athira Rajeev
#CPUs > 1K The 'perf bench futex' testcase fails on systems with more than 1K CPUs. Testcase: perf bench futex all Failure snippet: <<>>Running futex/hash benchmark... perf: pthread_create: No such file or directory <<>> All the futex benchmarks (ie hash, lock-api, requeue, wake, wake-parallel), pthread_create is invoked in respective bench_futex_* function. Though the logs shows direct failure from pthread_create, strace logs showed that actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Fix perf's libperf_print callbackAdrian Hunter
eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf: arm-spe: Fix perf report --mem-modeJames Clark
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't allow opening the file unless one of the events has PERF_SAMPLE_DATA_SRC set. SPE doesn't have this set even though synthetic memory data is generated after it is decoded. Fix this issue by setting DATA_SRC on SPE events. This has no effect on the data collected because the SPE driver doesn't do anything with that flag and doesn't generate samples. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf unwind: Don't show unwind error messages when augmenting frame pointer ↵James Clark
stack Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") intended to add a 'best effort' DWARF unwind that improved the frame pointer stack in most scenarios. It's expected that the unwind will fail sometimes, but this shouldn't be reported as an error. It only works when the return address can be determined from the contents of the link register alone. Fix the error shown when the unwinder requires extra registers by adding a new flag that suppresses error messages. This flag is not set in the normal --call-graph=dwarf unwind mode so that behavior is not changed. Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Chanho Park <chanho61.park@samsung.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf test tsc: Fix error message when not supportedChengdong Li
By default `perf test tsc` does not return the error message when the child process detected kernel does not support it. Instead, the child process prints an error message to stderr, unfortunately stderr is redirected to /dev/null when verbose <= 0. This patch does: - return TEST_SKIP to the parent process instead of TEST_OK when perf_read_tsc_conversion() is not supported. - Add a new subtest of testing if TSC is supported on current architecture by moving exist code to a separate function. It avoids two places in test__perf_time_to_tsc() that return TEST_SKIP by doing this. - Extend the test suite definition to contain above two subtests. Current test_suite and test_case structs do not support printing skip reason when the number of subtest less than 1. To print skip reason, it is necessary to extend current test suite definition. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chengdong Li <chengdongli@tencent.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: likexu@tencent.com Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf build: Don't use -ffat-lto-objects in the python feature test when ↵Arnaldo Carvalho de Melo
building with clang-13 Using -ffat-lto-objects in the python feature test when building with clang-13 results in: clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument] error: command '/usr/sbin/clang' failed with exit code 1 cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1 Noticed when building on a docker.io/library/archlinux:base container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf python: Fix probing for some clang command line optionsArnaldo Carvalho de Melo
The clang compiler complains about some options even without a source file being available, while others require one, so use the simple tools/build/feature/test-hello.c file. Then check for the "is not supported" string in its output, in addition to the "unknown argument" already being looked for. This was noticed when building with clang-13 where -ffat-lto-objects isn't supported and since we were looking just for "unknown argument" and not providing a source code to clang, was mistakenly assumed as being available and not being filtered to set of command line options provided to clang, leading to a build failure. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools build: Filter out options and warnings not supported by clangArnaldo Carvalho de Melo
These make the feature check fail when using clang, so remove them just like is done in tools/perf/Makefile.config to build perf itself. Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config when building with clang is also necessary to avoid these warnings turned into errors (-Werror): CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o In file included from util/scripting-engines/trace-event-perl.c:35: In file included from /usr/lib64/perl5/CORE/perl.h:4085: In file included from /usr/lib64/perl5/CORE/hv.h:659: In file included from /usr/lib64/perl5/CORE/hv_func.h:34: In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4: /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^~~~~~~~~~ /usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START' # define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' #define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro] ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' v ^= (v>>23); \ ^ /usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32' } STMT_END ^~~~~~~~ /usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END' # define STMT_END ) ^ Please refer to the discussion on the Link: tag below, where Nathan clarifies the situation: <quote> acme> And then get to the problems at the end of this message, which seem acme> similar to the problem described here: acme> acme> From Nathan Chancellor <> acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO acme> acme> https://lkml.org/lkml/2020/9/1/135 acme> acme> So perhaps in this case its better to disable that acme> -Werror,-Wcompound-token-split-by-macro when building with clang? Yes, I think that is probably the best solution. As far as I can tell, at least in this file and context, the warning appears harmless, as the "create a GNU C statement expression from two different macros" is very much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS. The warning is fixed in upstream Perl by just avoiding creating GNU C statement expressions using STMT_START and STMT_END: https://github.com/Perl/perl5/issues/18780 https://github.com/Perl/perl5/pull/18984 If I am reading the source code correctly, an alternative to disabling the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it seems like that might end up impacting more than just this site, according to the issue discussion above. </quote> Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools build: Use $(shell ) instead of `` to get embedded libperl's ccoptsArnaldo Carvalho de Melo
Just like its done for ldopts and for both in tools/perf/Makefile.config. Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using: $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS)) And we need to do it to allow for building with versions of clang where some gcc options selected by distros are not available. Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: b04d910af330b55e ("vdpa: support exposing the count of vqs to userspace") a61280ddddaa45f9 ("vdpa: support exposing the config size to userspace") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2021-07-15 16:17:01.840818309 -0300 +++ include/uapi/linux/vhost.h 2022-04-02 18:55:05.702522387 -0300 @@ -150,4 +150,11 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) + +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + #endif $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-04-04 14:52:25.036375145 -0300 +++ after 2022-04-04 14:52:31.906549976 -0300 @@ -38,4 +38,6 @@ [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", + [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x80] = "VDPA_GET_VQS_COUNT", }; $ Cc: Longpeng <longpeng2@huawei.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/lkml/YksxoFcOARk%2Fldev@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 19:25:23 +0000