| Age | Commit message (Collapse) | Author |
|---|
|
Add support to emulate the CXL the "Secure Erase" operation.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230612181038.14421-8-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add support to emulate the "Sanitize" operation, without
incurring in the background.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230612181038.14421-6-dave@stgolabs.net
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.
While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:
"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."
So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.
Cc: <stable@vger.kernel.org>
Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168685882012.3475336.16733084892658264991.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for support for HDM-D and HDM-DB configuration
(device-memory, and device-memory with back-invalidate). Rename the current
type designators to use HOSTONLYMEM and DEVMEM as a suffix.
HDM-DB can be supported by devices that are not accelerators, so DEVMEM is
a more generic term for that case.
Fixup one location where this type value was open coded.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679261369.3436160.7042443847605280593.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
'struct cxl_dev_state' makes too many assumptions about the capabilities
of a CXL device. In particular it assumes a CXL device has a mailbox and
all of the infrastructure and state that comes along with that.
In preparation for supporting accelerator / Type-2 devices that may not
have a mailbox and in general maintain a minimal core context structure,
make mailbox functionality a super-set of 'struct cxl_dev_state' with
'struct cxl_memdev_state'.
With this reorganization it allows for CXL devices that support HDM
decoder mapping, but not other general-expander / Type-3 capabilities,
to only enable that subset without the rest of the mailbox
infrastructure coming along for the ride.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679260240.3436160.15520641540463704524.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for plumbing a 'struct cxl_memdev_state' as a superset of
a 'struct cxl_dev_state' cleanup the usage of @cxlds in the unit test
infrastructure.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168679258640.3436160.7641308222525246728.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
For symmetry with the recent rename of ->dport_dev for a 'struct
cxl_dport', add the "_dev" suffix to the ->uport property of a 'struct
cxl_port'. These devices represent the downstream-port-device and
upstream-port-device respectively in the CXL/PCIe topology.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-6-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prepare cxl_probe_rcrb() for retrieving more than just the component
register block. The RCH AER handling code wants to get back to the AER
capability that happens to be MMIO mapped rather then configuration
cycles.
Move RCRB specific downstream port data, like the RCRB base and the
AER capability offset, into its own data structure ('struct
cxl_rcrb_info') for cxl_probe_rcrb() to fill. Extend 'struct
cxl_dport' to include a 'struct cxl_rcrb_info' attribute.
This centralizes all RCRB scanning in one routine.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-4-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
implementation comes with drawbacks: During ACPI table scan there is
already MMIO access including mapping and unmapping, but only ACPI
data should be collected here. The collected data must be transferred
through a couple of interfaces until it is finally consumed when
creating the dport. This causes complex data structures and function
interfaces. Additionally, RCRB parsing will be extended to also
extract AER data, it would be much easier do this at a later point
during port and dport creation when the data structures are available
to hold that data.
To simplify all that, probe the RCRB at a later point during RCH
downstream port creation. Change ACPI table parser to only extract the
base address of either the component registers or the RCRB. Parse and
extract the RCRB in devm_cxl_add_rch_dport().
This is in preparation to centralize all RCRB scanning.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-2-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20230622205523.85375-3-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that ->sendpage() has been removed, MSG_SENDPAGE_NOTLAST can be cleaned
up. Things were converted to use MSG_MORE instead, but the protocol
sendpage stubs still convert MSG_SENDPAGE_NOTLAST to MSG_MORE, which is now
unnecessary.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-17-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to the ynl tool for rendering output based on display-hint
properties.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230623201928.14275-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Spell "transmissions" properly.
Found by searching for keyword "tranm".
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-8-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves endpoint settings out of do_transfer() into a new
helper pm_nl_set_endpoint(). And invoke this helper in do_transfer().
This makes the code much more clearer.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-7-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "sflags=*" instead of positional parameter
sflags of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-6-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead
of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer()
and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-5-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "test_linkfail=*" instead of positional
parameter test_linkfail of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set FAILING_LINKS as an env var with a limited scope only when calling
run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-3-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New MPTCP info are being checked in multiple places to improve the code
coverage when using the userspace PM.
This patch makes chk_mptcp_info() more generic to be able to check
subflows, add_addr_signal and add_addr_accepted info (and even more
later). New arguments are now required to get different infos from the
two namespaces because some counters are specific to the client or the
server.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-2-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves userspace pm tests out of do_transfer(). Move add address
test into a new function userspace_pm_add_addr(), and remove address test
into userspace_pm_rm_sf_addr_ns1(). Move add subflow test into
userspace_pm_add_sf() and remove subflow into
userspace_pm_rm_sf_addr_ns2().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-1-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On systems where netdevsim is built-in or loaded before the test
starts, kci_test_ipsec_offload doesn't remove the netdevsim device it
created during the test.
Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/e1cb94f4f82f4eca4a444feec4488a1323396357.1687466906.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
perf_event_attr__fprintf()
When printing perf_event_attr, always display perf_event_attr config and
its symbol to improve the readability of debugging information.
Before:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 11
<SNIP>
After:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2 (PERF_TYPE_TRACEPOINT)
size 136
config 0x143 (sched:sched_switch)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10005 (PERF_COUNT_HW_CACHE_RESULT_MISS | PERF_COUNT_HW_CACHE_OP_READ | PERF_COUNT_HW_CACHE_BPU)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5 (PERF_TYPE_BREAKPOINT)
size 136
config 0
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 11
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 12
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-5-yangjihong1@huawei.com
[ fix perf import test by adding a dummy tracepoint_id__to_name() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
perf_event_attr__fprintf()
When printing perf_event_attr, always display perf_event_attr type and
its symbol to improve the readability of debugging information.
Before:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
<SNIP>
After:
# perf --debug verbose=2 record -e cycles,cpu-clock,sched:sched_switch,branch-load-misses,r101,mem:0x0 -C 0 true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
------------------------------------------------------------
perf_event_attr:
type 2 (PERF_TYPE_TRACEPOINT)
size 136
config 0x143
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10005
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 9
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x101
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 10
------------------------------------------------------------
perf_event_attr:
type 5 (PERF_TYPE_BREAKPOINT)
size 136
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|CPU|IDENTIFIER
read_format ID
disabled 1
inherit 1
sample_id_all 1
exclude_guest 1
bp_type 3
{ bp_len, config2 } 0x4
------------------------------------------------------------
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When printing attr, members whose value is 0 will not be printed, we want
to print the case where attr->type is 0(PERF_TYPE_HARDWARE), add `_a`
param to PRINT_ATTRf macro to always print member when it is true
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add tracepoint_id_to_name() helper to search for the trace events directory
by given event id and return the corresponding tracepoint.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: anshuman.khandual@arm.com
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: jesussanp@google.com
Cc: peterz@infradead.org
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: mingo@redhat.com
Link: https://lore.kernel.org/r/20230623054416.160858-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Previously used to specify symbol_name_rb_node was in use.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Most perf commands want to sort symbols by name and this is done via
an invasive rbtree that on 64-bit systems costs 24 bytes. Sorting the
symbols in a DSO by name is optional and not done by default, however,
if sorting is requested the 24 bytes is allocated for every
symbol.
This change removes the rbtree and uses a sorted array of symbol
pointers instead (costing 8 bytes per symbol). As the array is created
on demand then there are further memory savings. The complexity of
sorting the array and using the rbtree are the same.
To support going to the next symbol, the index of the current symbol
needs to be passed around as a pair with the current symbol. This
requires some API changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-3-irogers@google.com
[ minimize change in symbols__sort_by_name() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Determine if symbols are sorted, set the sorted flag and sort under
the dso lock. Done in the interest of thread safety.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-2-irogers@google.com
[ handle the similar code in util/probe-event.c ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If generating vmlinux.h, make the code to generate it more tolerant by
filtering out paths to kernels that lack a .BTF section.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230623041405.4039475-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add tests with and without generating vmlinux.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230623041405.4039475-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
struct rq is defined in vmlinux.h when the vmlinux.h is generated,
this causes a redefinition failure if it is declared in
lock_contention.bpf.c. Move the definition to vmlinux.h for
consistency with the generated version.
Fixes: 760ebc45746b ("perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230623041405.4039475-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This test checks if the output of perf stat to match event names and
metrics. So it wants the output lines to have both event name and
metric. Otherwise it should skip the line.
On AMD machines, the instruction event has two metrics and they are printed
in separate lines. It makes the line without event name like below:
# perf stat -a sleep 1
Performance counter stats for 'system wide':
64,383.34 msec cpu-clock # 64.048 CPUs utilized
14,526 context-switches # 225.617 /sec
112 cpu-migrations # 1.740 /sec
190 page-faults # 2.951 /sec
807,558,652 cycles # 0.013 GHz (83.30%)
69,809,799 stalled-cycles-frontend # 8.64% frontend cycles idle (83.30%)
196,983,266 stalled-cycles-backend # 24.39% backend cycles idle (83.30%)
424,876,008 instructions # 0.53 insn per cycle
(here) ---> # 0.46 stalled cycles per insn (83.30%)
97,788,321 branches # 1.519 M/sec (83.34%)
4,147,377 branch-misses # 4.24% of all branches (83.46%)
1.005241409 seconds time elapsed
Also modern Intel machines have TopDown metrics which also don't have
event names.
# perf stat -a sleep 1
Performance counter stats for 'system wide':
8,015.39 msec cpu-clock # 7.996 CPUs utilized
5,823 context-switches # 726.477 /sec
189 cpu-migrations # 23.580 /sec
139 page-faults # 17.342 /sec
435,139,308 cycles # 0.054 GHz
193,891,345 instructions # 0.45 insn per cycle
42,773,028 branches # 5.336 M/sec
2,298,113 branch-misses # 5.37% of all branches
TopdownL1 # 25.5 % tma_backend_bound
/--> # 7.9 % tma_bad_speculation
(here) --+ # 55.7 % tma_frontend_bound
\--> # 10.9 % tma_retiring
1.002395924 seconds time elapsed
There is a check to skip TopdownL1 and TopdownL2 specifically but it
does not cover every affected lines.
So there is another check to skip the line if it has nothing on the left
side of # sign. Well.. it seems ok but that's not enough too.
When aggregation mode (like --per-socket or --per-thread) is used, it
adds some prefix (e.g. CPU socket, task name and PID) in the output
line. So the test code ignores them to normalize result.
A problem can happen for per-thread mode when task name contains one or
more spaces. It'd only ignore the first part of the task name, and it
thinks there's something more in the line so it would not skip.
# perf stat -a --perf-thread sleep 1
...
perf-21276 # 70.2 % tma_backend_bound
perf-21276 # 3.9 % tma_bad_speculation
perf-21276 # 10.5 % tma_frontend_bound
perf-21276 # 15.3 % tma_retiring
^^^^^^^^^^
(ignored)
my task-21328 # 70.2 % tma_backend_bound
my task-21328 # 3.9 % tma_bad_speculation
my task-21328 # 10.5 % tma_frontend_bound
my task-21328 # 15.3 % tma_retiring
^^
(ignored)
So I think it should look at the metric names instead. Add skip_metric
to hold the list of names to skip. It would contain 'stalled cycles per
insn' and metrics started by 'tma_'.
Fixes: 99a04a48f225 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit a887466562b4 ("perf bpf skels: Stop using vmlinux.h generated
from BTF, use subset of used structs + CO-RE") made it so that
vmlinux.h was uncondtionally included from
tools/perf/util/vmlinux.h. This change reverts part of that change (so
that vmlinux.h is once again generated) and makes it so that the
vmlinux.h used at build time is selected from the VMLINUX_H
variable. By default the VMLINUX_H variable is set to the vmlinux.h
added in change a887466562b4, but if GEN_VMLINUX_H=1 is passed on the
build command line then the previous generation behavior kicks in.
The build with GEN_VMLINUX_H=1 currently fails with:
util/bpf_skel/lock_contention.bpf.c:419:8: error: redefinition of 'rq'
struct rq {};
^
/tmp/perf/util/bpf_skel/.tmp/../vmlinux.h:45630:8: note: previous definition is here
struct rq {
^
1 error generated.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230623041405.4039475-2-irogers@google.com
[ Format the error message and add a comment for GEN_VMLINUX_H ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On AMD machines, the perf stat STD output test failed like below:
$ sudo ./perf test -v 98
98: perf stat STD output linter :
--- start ---
test child forked, pid 1841901
Checking STD output: no argswrong event metric.
expected 'GHz' in 108,121 stalled-cycles-frontend # 10.88% frontend cycles idle
test child finished with -1
---- end ----
perf stat STD output linter: FAILED!
This is because there are stalled-cycles-{frontend,backend} events are
used by default. The current logic checks the event_name array to find
which event it's running. But 'cycles' event comes before those stalled
cycles event and it matches first. So it tries to find 'GHz' metric
in the output (which is for the 'cycles') and fails.
Move the stalled-cycles-{frontend,backend} events before 'cycles' so
that it can find the stalled cycles events first.
Also add a space after 'no args' test name for consistency.
Fixes: 99a04a48f225 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Before server got a client connection, there were some memory allocations
in the test memcg, such as user stack. So do not count those allocations
which are not related to socket when checking socket memory accounting.
Link: https://lkml.kernel.org/r/20230619124735.2124-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
* for-next/feat_s1pie:
: Support for the Armv8.9 Permission Indirection Extensions (stage 1 only)
KVM: selftests: get-reg-list: add Permission Indirection registers
KVM: selftests: get-reg-list: support ID register features
arm64: Document boot requirements for PIE
arm64: transfer permission indirection settings to EL2
arm64: enable Permission Indirection Extension (PIE)
arm64: add encodings of PIRx_ELx registers
arm64: disable EL2 traps for PIE
arm64: reorganise PAGE_/PROT_ macros
arm64: add PTE_WRITE to PROT_SECT_NORMAL
arm64: add PTE_UXN/PTE_WRITE to SWAPPER_*_FLAGS
KVM: arm64: expose ID_AA64MMFR3_EL1 to guests
KVM: arm64: Save/restore PIE registers
KVM: arm64: Save/restore TCR2_EL1
arm64: cpufeature: add Permission Indirection Extension cpucap
arm64: cpufeature: add TCR2 cpucap
arm64: cpufeature: add system register ID_AA64MMFR3
arm64/sysreg: add PIR*_ELx registers
arm64/sysreg: update HCRX_EL2 register
arm64/sysreg: add system registers TCR2_ELx
arm64/sysreg: Add ID register ID_AA64MMFR3
|
|
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
|
|
Due to the fact that TPIDR2 is intended to be managed by libc we don't
currently test modifying it via the signal context since that might
disrupt libc's usage of it and cause instability. We can however test the
opposite case with less risk, modifying TPIDR2 in a signal handler and
making sure that the original value is restored after returning from the
signal handler. Add a test which does this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230621-arm64-fix-tpidr2-signal-restore-v2-2-c8e8fcc10302@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add new test case kprobe_opt_types.tc which enables and checks
if each probe has been optimized in order to test potential issues with
optimized probes.
The '|| continue' is added with the echo statement to ignore errors that
are caused by trying to add kprobes to non probeable lines and continue
with the test.
Link: Link: https://lore.kernel.org/linux-trace-kernel/20230428163842.95118-3-akanksha@linux.ibm.com
Signed-off-by: Akanksha J N <akanksha@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
The property of "cpu" when it has no cpu map is true on S390 with the
PMU cpum_cf. Rather than maintain a list of such PMUs, reuse the
is_core test result from the caller.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20230623043843.4080180-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
JSON events created in pmu-events.c by jevents.py may not specify a
PMU they are associated with, in which case it is implied that it is
the first core PMU. Care is needed to select this for regular 'cpu',
s390 'cpum_cf' and ARMs many names as at the point the name is first
needed the core PMUs list hasn't been initialized. Add a helper in
perf_pmus to create this value, in the worst case by scanning sysfs.
v2. Add missing close if fdopendir fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230623043843.4080180-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The result of thread__find_map is the map in the passed in
addr_location. Calling addr_location__exit puts that map and so copies
need to do a map__get. Add in the corresponding map__puts.
v2. Add missing map__put when dso is missing.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230623043107.4077510-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The task-analyzer.py script (actually every other scripts too) requires
PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts
test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool
source directory.
Instead of blindly update the env, let's check the directory structure
to make sure it points to the correct location.
Fixes: e8478b84d6ba ("perf test: add new task-analyzer tests")
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The buffer is used to save register mapping in a sample. Normally
perf samples don't have any register so the string should be empty.
But it missed to initialize the buffer when the size is 0. And it's
passed to PyUnicode_FromString() with a garbage data.
So it returns NULL due to invalid input (instead of an empty unicode
string object) which causes a segfault like below:
Thread 2.1 "perf" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff7c83780 (LWP 193775)]
0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0
(gdb) bt
#0 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0
#1 0x00007ffff6dbf848 in PyDict_SetItemString () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0
#2 0x000055555575824d in pydict_set_item_string_decref (val=0x0, key=0x5555557f96e3 "iregs", dict=0x7ffff5f7f780)
at util/scripting-engines/trace-event-python.c:145
#3 set_regs_in_dict (evsel=0x555555efc370, sample=0x7fffffffb870, dict=0x7ffff5f7f780)
at util/scripting-engines/trace-event-python.c:776
#4 get_perf_sample_dict (sample=sample@entry=0x7fffffffb870, evsel=evsel@entry=0x555555efc370, al=al@entry=0x7fffffffb2e0,
addr_al=addr_al@entry=0x0, callchain=callchain@entry=0x7ffff63ef440) at util/scripting-engines/trace-event-python.c:923
#5 0x0000555555758ec1 in python_process_tracepoint (sample=0x7fffffffb870, evsel=0x555555efc370, al=0x7fffffffb2e0, addr_al=0x0)
at util/scripting-engines/trace-event-python.c:1044
#6 0x00005555555c5db8 in process_sample_event (tool=<optimized out>, event=<optimized out>, sample=<optimized out>,
evsel=0x555555efc370, machine=0x555555ef4d68) at builtin-script.c:2421
#7 0x00005555556b7793 in perf_session__deliver_event (session=0x555555ef4b60, event=0x7ffff62ff7d0, tool=0x7fffffffc150,
file_offset=30672, file_path=0x555555efb8a0 "perf.data") at util/session.c:1639
#8 0x00005555556bc864 in do_flush (show_progress=true, oe=0x555555efb700) at util/ordered-events.c:245
#9 __ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL, timestamp=timestamp@entry=0)
at util/ordered-events.c:324
#10 0x00005555556bd06e in ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL)
at util/ordered-events.c:342
#11 0x00005555556b9d63 in __perf_session__process_events (session=0x555555ef4b60) at util/session.c:2465
#12 perf_session__process_events (session=0x555555ef4b60) at util/session.c:2627
#13 0x00005555555cb1d0 in __cmd_script (script=0x7fffffffc150) at builtin-script.c:2839
#14 cmd_script (argc=<optimized out>, argv=<optimized out>) at builtin-script.c:4365
#15 0x0000555555650811 in run_builtin (p=p@entry=0x555555ed8948 <commands+456>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe240)
at perf.c:323
#16 0x0000555555597eb3 in handle_internal_command (argv=0x7fffffffe240, argc=4) at perf.c:377
#17 run_argv (argv=<synthetic pointer>, argcp=<synthetic pointer>) at perf.c:421
#18 main (argc=4, argv=0x7fffffffe240) at perf.c:537
Fixes: 51cfe7a3e87e ("perf python: Avoid 2 leak sanitizer issues")
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
$TEST_PROGRAM is a command with spaces so it's supposed to be word
split. The referenced fix to fix the shellcheck warnings incorrectly
quoted this string so unquote it to fix the test.
At the same time silence the shellcheck warning for that line and fix
two more shellcheck errors at the end of the script.
Fixes: 1bb17b4c6c91 ("perf tests arm_callgraph_fp: Address shellcheck warnings about signal names and adding double quotes for expression")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: spoorts2@in.ibm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230622101809.2431897-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Przemek suggests that I shouldn't accuse GCC of witchcraft,
there is a simpler explanation for why we need manual define.
scripts/headers_install.sh modifies the guard, removing _UAPI.
That's why including a kernel header from the tree and from
/usr leads to duplicate definitions.
This also solves the mystery of why I needed to include
the header conditionally. I had the wrong guards for most
cases but ethtool.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20230621231719.2728928-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ipsec, bpf, mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain
established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"
* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
revert "net: align SO_RCVMARK required privileges with SO_MARK"
net: wwan: iosm: Convert single instance struct member to flexible array
sch_netem: acquire qdisc lock in netem_change()
selftests: forwarding: Fix race condition in mirror installation
wifi: mac80211: report all unusable beacon frames
mptcp: ensure listener is unhashed before updating the sk status
mptcp: drop legacy code around RX EOF
mptcp: consolidate fallback and non fallback state machine
mptcp: fix possible list corruption on passive MPJ
mptcp: fix possible divide by zero in recvmsg()
mptcp: handle correctly disconnect() failures
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
Revert "net: phy: dp83867: perform soft reset and retain established link"
net: mdio: fix the wrong parameters
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
...
|
|
We can see the following definitions in bfd/elfnn-loongarch.c:
#define PLT_HEADER_INSNS 8
#define PLT_HEADER_SIZE (PLT_HEADER_INSNS * 4)
#define PLT_ENTRY_INSNS 4
#define PLT_ENTRY_SIZE (PLT_ENTRY_INSNS * 4)
so plt header size is 32 and plt entry size is 16 on LoongArch,
let us add LoongArch case in get_plt_sizes().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=bfd/elfnn-loongarch.c
Link: https://lore.kernel.org/r/1684835873-15956-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
