summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2024-07-16Merge tag 'pm-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new cpufreq driver for Loongson-3, add support for new features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB mode for Emerald Rapids, highest performance change interrupt), amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq drivers, simplify the cpufreq driver interface, simplify the teo cpuidle governor, adjust the pm-graph utility for a new version of Python, address issues and clean up code. Specifics: - Add Loongson-3 CPUFreq driver support (Huacai Chen) - Add support for the Arrow Lake and Lunar Lake platforms and the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate cpufreq driver, make it support the highest performance change interrupt and clean it up (Srinivas Pandruvada) - Switch cpufreq to new Intel CPU model defines (Tony Luck) - Simplify the cpufreq driver interface by switching the .exit() driver callback to the void return data type (Lizhe, Viresh Kumar) - Make cpufreq_boost_enabled() return bool (Dhruva Gole) - Add fast CPPC support to the amd-pstate cpufreq driver, address multiple assorted issues in it and clean it up (Perry Yuan, Mario Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du) - Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan Walklin) - Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem cpufreq drivers (Javier Carrasco) - Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson, Raphael Gallais-Pou) - Fix deferred probe handling in the TI cpufreq driver and wrong return values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser) - Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq driver (Jagadeesh Kona) - Use dev_err_probe() in every error path in probe in the Mediatek cpufreq driver (Nícolas Prado) - Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq driver (Yang Li) - Fix system resume handling in the CPPC cpufreq driver (Riwen Lu) - Improve the teo cpuidle governor and clean up leftover comments from the menu cpuidle governor (Christian Loehle) - Clean up a comment typo in the teo cpuidle governor (Atul Kumar Pant) - Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff Johnson) - Switch the intel_idle driver to new Intel CPU model defines (Tony Luck) - Switch the Intel RAPL driver new Intel CPU model defines (Tony Luck) - Simplify if condition in the idle_inject driver (Thorsten Blum) - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar) - Introduce an OF helper function to inform if required-opps is used and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson) - Update pm-graph to v5.12 which includes fixes and major code revamp for python3.12 (Todd Brandt) - Address several assorted issues in the cpupower utility (Roman Storozhenko)" * tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits) cpufreq: sti: fix build warning cpufreq: mediatek: Use dev_err_probe in every error path in probe cpufreq: Add Loongson-3 CPUFreq driver support cpufreq: Make cpufreq_driver->exit() return void cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons cpufreq: pcc: Remove empty exit() callback cpufreq: loongson2: Remove empty exit() callback cpufreq: nforce2: Remove empty exit() callback cpupower: fix lib default installation path cpufreq: docs: Add missing scaling_available_frequencies description cpuidle: teo: Don't count non-existent intercepts cpupower: Disable direct build of the 'bench' subproject cpuidle: teo: Remove recent intercepts metric Revert: "cpuidle: teo: Introduce util-awareness" cpufreq: make cpufreq_boost_enabled() return bool cpufreq: intel_pstate: Support highest performance change interrupt x86/cpufeatures: Add HWP highest perf change feature flag Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off ...
2024-07-16Merge tag 'hardening-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations * tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randomize_kstack: Improve stack alignment codegen ARM: Remove address checking for MMUless devices gcc-plugins: Remove duplicate included header file stringpool.h randomize_kstack: Remove non-functional per-arch entropy filtering fortify: Do not special-case 0-sized destinations x86/alternatives: Make FineIBT mode Kconfig selectable lkdtm/bugs: add test for hung smp_call_function_single()
2024-07-16Merge tag 'seccomp-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) * tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: check that a zombie leader doesn't affect others selftests/seccomp: add test for NOTIF_RECV and unused filters seccomp: release task filters when the task exits seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited
2024-07-16Merge tag 'execve-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Use value of kernel.randomize_va_space once per exec (Alexey Dobriyan) - Honor PT_LOAD alignment for static PIE - Make bprm->argmin only visible under CONFIG_MMU - Add KUnit testing of bprm_stack_limits() * tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Avoid pathological argc, envc, and bprm->p values execve: Keep bprm->argmin behind CONFIG_MMU ELF: fix kernel.randomize_va_space double read exec: Add KUnit test for bprm_stack_limits() binfmt_elf: Honor PT_LOAD alignment for static PIE binfmt_elf: Calculate total_size earlier selftests/exec: Build both static and non-static load_address tests
2024-07-16Merge tag 'asm-generic-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl
2024-07-16Merge tag 'kvm-x86-selftests-6.11' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM selftests for 6.11 - Remove dead code in the memslot modification stress test. - Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs. - Print the guest pseudo-RNG seed only when it changes, to avoid spamming the log for tests that create lots of VMs. - Make the PMU counters test less flaky when counting LLC cache misses by doing CLFLUSH{OPT} in every loop iteration.
2024-07-16Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86 misc changes for 6.11 - Add a global struct to consolidate tracking of host values, e.g. EFER, and move "shadow_phys_bits" into the structure as "maxphyaddr". - Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. - Print the name of the APICv/AVIC inhibits in the relevant tracepoint. - Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. - Misc cleanups
2024-07-16Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM generic changes for 6.11 - Enable halt poll shrinking by default, as Intel found it to be a clear win. - Setup empty IRQ routing when creating a VM to avoid having to synchronize SRCU when creating a split IRQCHIP on x86. - Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag that arch code can use for hooking both sched_in() and sched_out(). - Take the vCPU @id as an "unsigned long" instead of "u32" to avoid truncating a bogus value from userspace, e.g. to help userspace detect bugs. - Mark a vCPU as preempted if and only if it's scheduled out while in the KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest memory when retrieving guest state during live migration blackout. - A few minor cleanups
2024-07-16Merge tag 'kvmarm-6.11' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.11 - Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement - Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware - Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol - FPSIMD/SVE support for nested, including merged trap configuration and exception routing - New command-line parameter to control the WFx trap behavior under KVM - Introduce kCFI hardening in the EL2 hypervisor - Fixes + cleanups for handling presence/absence of FEAT_TCRX - Miscellaneous fixes + documentation updates
2024-07-15Merge tag 'x86_bugs_for_v6.11_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu mitigation updates from Borislav Petkov: - Add a spectre_bhi=vmexit mitigation option aimed at cloud environments - Remove duplicated Spectre cmdline option documentation - Add separate macro definitions for syscall handlers which do not return in order to address objtool warnings * tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Add 'spectre_bhi=vmexit' cmdline option x86/bugs: Remove duplicate Spectre cmdline option descriptions x86/syscall: Mark exit[_group] syscall handlers __noreturn
2024-07-15Merge tag 'x86_misc_for_v6.11_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Make error checking of AMD SMN accesses more robust in the callers as they're the only ones who can interpret the results properly - The usual cleanups and fixes, left and right * tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kmsan: Fix hook for unaligned accesses x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos x86/pci/xen: Fix PCIBIOS_* return code handling x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling x86/of: Return consistent error type from x86_of_pci_irq_enable() hwmon: (k10temp) Rename _data variable hwmon: (k10temp) Remove unused HAVE_TDIE() macro hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters hwmon: (k10temp) Define a helper function to read CCD temperature x86/amd_nb: Enhance SMN access error checking hwmon: (k10temp) Check return value of amd_smn_read() EDAC/amd64: Check return value of amd_smn_read() EDAC/amd64: Remove unused register accesses tools/x86/kcpuid: Add missing dir via Makefile x86, arm: Add missing license tag to syscall tables files
2024-07-15Merge tag 'x86_alternatives_for_v6.11_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 alternatives updates from Borislav Petkov: "This is basically PeterZ's idea to nest the alternative macros to avoid the need to "spell out" the number of alternates in an ALTERNATIVE_n() macro and thus have an ever-increasing complexity in those definitions. For ease of bisection, the old macros are converted to the new, nested variants in a step-by-step manner so that in case an issue is encountered during testing, one can pinpoint the place where it fails easier. Because debugging alternatives is a serious pain" * tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer x86/alternative: Replace the old macros x86/alternative: Convert the asm ALTERNATIVE_3() macro x86/alternative: Convert the asm ALTERNATIVE_2() macro x86/alternative: Convert the asm ALTERNATIVE() macro x86/alternative: Convert ALTERNATIVE_3() x86/alternative: Convert ALTERNATIVE_TERNARY() x86/alternative: Convert alternative_call_2() x86/alternative: Convert alternative_call() x86/alternative: Convert alternative_io() x86/alternative: Convert alternative_input() x86/alternative: Convert alternative_2() x86/alternative: Convert alternative() x86/alternatives: Add nested alternatives macros x86/alternative: Zap alternative_ternary()
2024-07-15Merge tag 'gpio-updates-for-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "The majority of added lines are two new modules: the GPIO virtual consumer module that improves our ability to add automated tests for the kernel API and the "sloppy" logic analyzer module that uses the GPIO API to implement a coarse-grained debugging tool for useful for remote development. Other than that we have the usual assortment of various driver extensions, improvements to the core GPIO code, DT-bindings and other documentation updates as well as an extension to the interrupt simulator: GPIOLIB core: - rework kfifo handling rework in the character device code - improve the labeling of GPIOs requested as interrupts and show more info on interrupt-only GPIOs in debugfs - remove unused APIs - unexport interfaces that are only used from the core GPIO code - drop the return value from gpiochip_set_desc_names() as it cannot fail - move a string array definition out of a header and into a specific compilation unit - convert the last user of gpiochip_get_desc() other than GPIO core to using a safer alternative - use array_index_nospec() where applicable New drivers: - add a "virtual GPIO consumer" module that allows requesting GPIOs from actual hardware and driving tests of the in-kernel GPIO API from user-space over debugfs - add a GPIO-based "sloppy" logic analyzer module useful for "first glance" debugging on remote boards Driver improvements: - add support for a new model to gpio-pca953x - lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs via the simulator domain + some other minor improvements - improve error reporting in gpio-syscon - convert gpio-ath79 to using dynamic GPIO base and range - use pcibios_err_to_errno() for converting PCIBIOS error codes to errno vaues in gpio-amd8111 and gpio-rdc321x - allow building gpio-brcmstb for the BCM2835 architecture DT bindings: - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema - document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610 - document new compatibles for pca953x and fsl,qoriq-gpio Documentation: - document stricter behavior of the GPIO character device uAPI with regards to reconfiguring requested line without direction set - clarify the effect of the active-low flag on line values and edges - remove documentation for the legacy GPIO API in order to stop tempting people to use it - document the preference for using pread() for reading edge events in the sysfs API Other: - add an extended initializer to the interrupt simulator allowing to specify a number of callbacks callers can use to be notified about irqs being requested and released" * tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits) gpio: mc33880: Convert comma to semicolon gpio: virtuser: actually use the "trimmed" local variable dt-bindings: gpio: convert Atmel GPIO to json-schema gpio: virtuser: new virtual testing driver for the GPIO API dt-bindings: gpio: vf610: Allow gpio-line-names to be set gpio: sim: lock GPIOs as interrupts when they are requested genirq/irq_sim: add an extended irq_sim initializer dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio gpiolib: unexport gpiochip_get_desc() gpio: add sloppy logic analyzer using polling Documentation: gpio: Reconfiguration with unset direction (uAPI v2) Documentation: gpio: Reconfiguration with unset direction (uAPI v1) dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names gpio: ath79: convert to dynamic GPIO base allocation pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc() gpiolib: put gpio_suffixes in a single compilation unit Documentation: gpio: Clarify effect of active low flag on line edges Documentation: gpio: Clarify effect of active low flag on line values gpiolib: Remove data-less gpiochip_add() function gpio: sim: use devm_mutex_init() ...
2024-07-15Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The biggest part is the virtual CPU hotplug that touches ACPI, irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has been queued via the arm64 tree. Otherwise the usual perf updates, kselftest, various small cleanups. Core: - Virtual CPU hotplug support for arm64 ACPI systems - cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits visible to guests - CPU errata: expand the speculative SSBS workaround to more CPUs - GICv3, use compile-time PMR values: optimise the way regular IRQs are masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for a static key in fast paths by using a priority value chosen dynamically at boot time ACPI: - 'acpi=nospcr' option to disable SPCR as default console for arm64 - Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/ Perf updates: - Rework of the IMX PMU driver to enable support for I.MX95 - Enable support for tertiary match groups in the CMN PMU driver - Initial refactoring of the CPU PMU code to prepare for the fixed instruction counter introduced by Arm v9.4 - Add missing PMU driver MODULE_DESCRIPTION() strings - Hook up DT compatibles for recent CPU PMUs Kselftest updates: - Kernel mode NEON fp-stress - Cleanups, spelling mistakes Miscellaneous: - arm64 Documentation update with a minor clarification on TBI - Fix missing IPI statistics - Implement raw_smp_processor_id() using thread_info rather than a per-CPU variable (better code generation) - Make MTE checking of in-kernel asynchronous tag faults conditional on KASAN being enabled - Minor cleanups, typos" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits) selftests: arm64: tags: remove the result script selftests: arm64: tags_test: conform test to TAP output perf: add missing MODULE_DESCRIPTION() macros arm64: smp: Fix missing IPI statistics irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64 Documentation: arm64: Update memory.rst for TBI arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1 KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1 perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h perf: arm_v6/7_pmu: Drop non-DT probe support perf/arm: Move 32-bit PMU drivers to drivers/perf/ perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU perf: imx_perf: add support for i.MX95 platform perf: imx_perf: fix counter start and config sequence perf: imx_perf: refactor driver for imx93 perf: imx_perf: let the driver manage the counter usage rather the user perf: imx_perf: add macro definitions for parsing config attr ...
2024-07-15Merge tag 'cgroup-for-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Added Michal Koutný as a maintainer - Counters in pids.events were behaving inconsistently. pids.events made properly hierarchical and pids.events.local added - misc.peak and misc.events.local added - cpuset remote partition creation and cpuset.cpus.exclusive handling improved - Code cleanups, non-critical fixes, doc updates - for-6.10-fixes is merged in to receive two non-critical fixes that didn't trigger pull * tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) cgroup: Add Michal Koutný as a maintainer cgroup/misc: Introduce misc.events.local cgroup/rstat: add force idle show helper cgroup: Protect css->cgroup write under css_set_lock cgroup/misc: Introduce misc.peak cgroup_misc: add kernel-doc comments for enum misc_res_type cgroup/cpuset: Prevent UAF in proc_cpuset_show() selftest/cgroup: Update test_cpuset_prs.sh to match changes cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot cgroup/cpuset: Fix remote root partition creation problem cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit() cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files selftests: cgroup: Add basic tests for pids controller selftests: cgroup: Lexicographic order in Makefile cgroup/pids: Add pids.events.local cgroup/pids: Make event counters hierarchical ...
2024-07-15Merge tag 'nolibc.2024.07.15a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Fix selftest printf format mismatch in expect_str_buf_eq() - Stop using brk() and sbrk() when testing against musl, which implements these two functions with ENOMEM - Make tests use -Werror to force failure on compiler warnings - Add limits for the {u,}intmax_t, ulong and {u,}llong types - Implement strtol() and friends - Add facility to skip nolibc-specific tests when running against non-nolibc libraries - Implement strerror() - Also use strerror() on nolibc when running kselftests * tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: selftests: kselftest: also use strerror() on nolibc tools/nolibc: implement strerror() selftests/nolibc: introduce condition to run tests only on nolibc tools/nolibc: implement strtol() and friends tools/nolibc: add limits for {u,}intmax_t, ulong and {u,}llong selftests/nolibc: run-tests.sh: use -Werror by default selftests/nolibc: disable brk()/sbrk() tests on musl selftests/nolibc: fix printf format mismatch in expect_str_buf_eq()
2024-07-15Merge tag 'kcsan.2024.07.12a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull KCSAN updates from Paul McKenney: - improve the documentation for the new __data_racy type qualifier to the data_race() macro's kernel-doc header and to the LKMM's access-marking documentation - add missing MODULE_DESCRIPTION * tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: kcsan: Add missing MODULE_DESCRIPTION() macro kcsan: Add example to data_race() kerneldoc header
2024-07-15Merge tag 'rcu.2024.07.12a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Update Tasks RCU and Tasks Rude RCU description in Requirements.rst and clarify rcu_assign_pointer() and rcu_dereference() ordering properties - Add lockdep assertions for RCU readers, limit inline wakeups for callback-bypass synchronize_rcu(), add an rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add Uladzislau Rezki as RCU maintainer, and fix a subtle callback-migration memory-ordering issue - Remove a number of redundant memory barriers - Remove unnecessary bypass-list lock-contention mitigation, use parking API instead of open-coded ad-hoc equivalent, and upgrade obsolete comments - Revert avoidance of a deadlock that can no longer occur and properly synchronize Tasks Trace RCU checking of runqueues - Add tests for handling of double-call_rcu() bug, add missing MODULE_DESCRIPTION, and add a script that histograms the number of calls to RCU updaters - Fill out SRCU polled-grace-period API * tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits) rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation rcu: Eliminate lockless accesses to rcu_sync->gp_count MAINTAINERS: Add Uladzislau Rezki as RCU maintainer rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter rcu/exp: Remove redundant full memory barrier at the end of GP rcu: Remove full memory barrier on RCU stall printout rcu: Remove full memory barrier on boot time eqs sanity check rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove full ordering on second EQS snapshot srcu: Fill out polled grace-period APIs srcu: Update cleanup_srcu_struct() comment srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE srcu: Disable interrupts directly in srcu_gp_end() rcu: Disable interrupts directly in rcu_gp_init() rcu/tree: Reduce wake up for synchronize_rcu() common case rcu/tasks: Fix stale task snaphot for Tasks Trace tools/rcu: Add rcu-updaters.sh script rcutorture: Add missing MODULE_DESCRIPTION() macros rcutorture: Fix rcu_torture_fwd_cb_cr() data race ...
2024-07-15Merge tag 'lkmm.2024.07.12a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull memory model updates from Paul McKenney: "lkmm: Fix corner-case locking bug and improve documentation A simple but odd single-process litmus test acquires and immediately releases a lock, then calls spin_is_locked(). LKMM acts if it was a deadlock due to an assumption that spin_is_locked() will follow a spin_lock() or some other process's spin_unlock(). This litmus test manages to violate this assumption because the spin_is_locked() follows the same process's spin_unlock(). This series fixes this bug, reorganizes and optimizes the lock.cat model, and updates documentation" * tag 'lkmm.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/memory-model: Code reorganization in lock.cat tools/memory-model: Fix bug in lock.cat tools/memory-model: Add access-marking.txt to README tools/memory-model: Add KCSAN LF mentorship session citation
2024-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.11 net-next PR. Conflicts: 93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null") 4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref") 30d7b6727724 ("net: ethtool: Add new power limit get and set features") https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15Merge tag 'vfs-6.11.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs mount query updates from Christian Brauner: "This contains work to extend the abilities of listmount() and statmount() and various fixes and cleanups. Features: - Allow iterating through mounts via listmount() from newest to oldest. This makes it possible for mount(8) to keep iterating the mount table in reverse order so it gets newest mounts first. - Relax permissions on listmount() and statmount(). It's not necessary to have capabilities in the initial namespace: it is sufficient to have capabilities in the owning namespace of the mount namespace we're located in to list unreachable mounts in that namespace. - Extend both listmount() and statmount() to list and stat mounts in foreign mount namespaces. Currently the only way to iterate over mount entries in mount namespaces that aren't in the caller's mount namespace is by crawling through /proc in order to find /proc/<pid>/mountinfo for the relevant mount namespace. This is both very clumsy and hugely inefficient. So extend struct mnt_id_req with a new member that allows to specify the mount namespace id of the mount namespace we want to look at. Luckily internally we already have most of the infrastructure for this so we just need to expose it to userspace. Give userspace a way to retrieve the id of a mount namespace via statmount() and through a new nsfs ioctl() on mount namespace file descriptor. This comes with appropriate selftests. - Expose mount options through statmount(). Currently if userspace wants to get mount options for a mount and with statmount(), they still have to open /proc/<pid>/mountinfo to parse mount options. Simply the information through statmount() directly. Afterwards it's possible to only rely on statmount() and listmount() to retrieve all and more information than /proc/<pid>/mountinfo provides. This comes with appropriate selftests. Fixes: - Avoid copying to userspace under the namespace semaphore in listmount. Cleanups: - Simplify the error handling in listmount by relying on our newly added cleanup infrastructure. - Refuse invalid mount ids early for both listmount and statmount" * tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: reject invalid last mount id early fs: refuse mnt id requests with invalid ids early fs: find rootfs mount of the mount namespace fs: only copy to userspace on success in listmount() sefltests: extend the statmount test for mount options fs: use guard for namespace_sem in statmount() fs: export mount options via statmount() fs: rename show_mnt_opts -> show_vfsmnt_opts selftests: add a test for the foreign mnt ns extensions fs: add an ioctl to get the mnt ns id from nsfs fs: Allow statmount() in foreign mount namespace fs: Allow listmount() in foreign mount namespace fs: export the mount ns id via statmount fs: keep an index of current mount namespaces fs: relax permissions for statmount() listmount: allow listing in reverse order fs: relax permissions for listmount() fs: simplify error handling fs: don't copy to userspace under namespace semaphore path: add cleanup helper
2024-07-15Merge branches 'pm-opp' and 'pm-tools'Rafael J. Wysocki
Merge OPP (operating performance points) and tooling updates for 6.11-rc1: - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar). - Introduce an OF helper function to inform if required-opps is used and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson). - Update pm-graph to v5.12 which includes fixes and major code revamp for python3.12 (Todd Brandt). - Address several assorted issues in the cpupower utility (Roman Storozhenko). * pm-opp: OPP: Introduce an OF helper function to inform if required-opps is used OPP: Drop a redundant in-parameter to _set_opp_level() OPP: Fix missing cleanup on error in _opp_attach_genpd() * pm-tools: cpupower: fix lib default installation path cpupower: Disable direct build of the 'bench' subproject cpupower: Change the var type of the 'monitor' subcommand display mode cpupower: Remove absent 'v' parameter from monitor man page cpupower: Improve cpupower build process description cpupower: Add 'help' target to the main Makefile cpupower: Replace a dead reference link with working ones pm-graph: v5.12, code revamp for python3.12 pm-graph: v5.12, fixes
2024-07-15Merge tag 'asoc-v6.11' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for for v6.11 There are a lot of changes in here, though the big bulk of things is cleanups and simplifications of various kinds which are internally rather than externally visible. A good chunk of those are DT schema conversions, but there's also a lot of changes in the code. Highlights: - Syncing of features between simple-audio-card and the two audio-graph cards so there is no reason to stick with an older driver. - Support for specifying the order of operations for components within cards to allow quirking for unusual systems. - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
2024-07-15Merge branch 'slab/for-6.11/buckets' into slab/for-nextVlastimil Babka
Merge all the slab patches previously collected on top of v6.10-rc1, over cleanups/fixes that had to be based on rc6.
2024-07-15selftests/bpf: Change uretprobe syscall number in uprobe_syscall testJiri Olsa
Fixing the syscall number value. Link: https://lore.kernel.org/all/20240712135228.1619332-3-jolsa@kernel.org/ Fixes: 9e7f74e64ae5 ("selftests/bpf: Add uretprobe syscall call from user space test") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-07-14Merge branch 'for-6.10-fixes' into for-6.11Tejun Heo
2024-07-14selftests: vrf_route_leaking: add local testNicolas Dichtel
The goal is to check that the source address selected by the kernel is routable when a leaking route is used. ICMP, TCP and UDP connections are tested. The symmetric topology is enough for this test. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240710081521.3809742-5-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-14selftests: forwarding: devlink_lib: Wait for udev events after reloadingAmit Cohen
Lately, an additional locking was added by commit c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()"). The locking protects dev_uevent() calling. This function is used to send messages from the kernel to user space. Uevent messages notify user space about changes in device states, such as when a device is added, removed, or changed. These messages are used by udev (or other similar user-space tools) to apply device-specific rules. After reloading devlink instance, udev events should be processed. This locking causes a short delay of udev events handling. One example for useful udev rule is renaming ports. 'forwading.config' can be configured to use names after udev rules are applied. Some tests run devlink_reload() and immediately use the updated names. This worked before the above mentioned commit was pushed, but now the delay of uevent messages causes that devlink_reload() returns before udev events are handled and tests fail. Adjust devlink_reload() to not assume that udev events are already processed when devlink reload is done, instead, wait for udev events to ensure they are processed before returning from the function. Without this patch: TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory Cannot find device "swp1" Cannot find device "swp2" TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL] With this patch: $ TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] TEST: 'rif_mac_profile' overflow 5 [ OK ] This is relevant not only for this test. Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-14Merge branch kvm-arm64/ctr-el0 into kvmarm/nextOliver Upton
* kvm-arm64/ctr-el0: : Support for user changes to CTR_EL0, courtesy of Sebastian Ott : : Allow userspace to change the guest-visible value of CTR_EL0 for a VM, : so long as the requested value represents a subset of features supported : by hardware. In other words, prevent the VMM from over-promising the : capabilities of hardware. : : Make this happen by fitting CTR_EL0 into the existing infrastructure for : feature ID registers. KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking KVM: selftests: arm64: Test writes to CTR_EL0 KVM: arm64: rename functions for invariant sys regs KVM: arm64: show writable masks for feature registers KVM: arm64: Treat CTR_EL0 as a VM feature ID register KVM: arm64: unify code to prepare traps KVM: arm64: nv: Use accessors for modifying ID registers KVM: arm64: Add helper for writing ID regs KVM: arm64: Use read-only helper for reading VM ID registers KVM: arm64: Make idregs debugfs iterator search sysreg table directly KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show() Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-07-13selftests: mptcp: lib: fix shellcheck errorsMatthieu Baerts (NGI0)
It looks like we missed these two errors recently: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2145: Argument mixes string and array. Use * or separate argument. Two simple fixes, it is not supposed to change the behaviour as the variable names should not have any spaces in their names. Still, better to fix them to easily spot new issues. Fixes: f265d3119a29 ("selftests: mptcp: lib: use setup/cleanup_ns helpers") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240712-upstream-net-next-20240712-selftests-mptcp-fix-shellcheck-v1-1-1cb7180db40a@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-13selftests: tcp: Remove broken SNMP assumptions for TCP AO self-connect tests.Kuniyuki Iwashima
tcp_ao/self-connect.c checked the following SNMP stats before/after connect() to confirm that the test exercises the simultaneous connect() path. * TCPChallengeACK * TCPSYNChallenge But the stats should not be counted for self-connect in the first place, and the assumption is no longer true. Let's remove the check. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://patch.msgid.link/20240710171246.87533-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-13test/vsock: add install targetPeng Fan
Add install target for vsock to make Yocto easy to install the images. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20240710122728.45044-1-peng.fan@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-12Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-12 We've added 23 non-merge commits during the last 3 day(s) which contain a total of 18 files changed, 234 insertions(+), 243 deletions(-). The main changes are: 1) Improve BPF verifier by utilizing overflow.h helpers to check for overflows, from Shung-Hsi Yu. 2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT when attr->attach_prog_fd was not specified, from Tengda Wu. 3) Fix arm64 BPF JIT when generating code for BPF trampolines with BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits, from Puranjay Mohan. 4) Remove test_run callback from lwt_seg6local_prog_ops which never worked in the first place and caused syzbot reports, from Sebastian Andrzej Siewior. 5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/ /KF_RCU-typed BPF kfuncs, from Matt Bobrowski. 6) Fix a long standing bug in libbpf with regards to handling of BPF skeleton's forward and backward compatibility, from Andrii Nakryiko. 7) Annotate btf_{seq,snprintf}_show functions with __printf, from Alan Maguire. 8) BPF selftest improvements to reuse common network helpers in sk_lookup test and dropping the open-coded inetaddr_len() and make_socket() ones, from Geliang Tang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type() bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again bpf: use check_sub_overflow() to check for subtraction overflows bpf: use check_add_overflow() to check for addition overflows bpf: fix overflow check in adjust_jmp_off() bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o bpf: annotate BTF show functions with __printf bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG selftests/bpf: Close obj in error path in xdp_adjust_tail selftests/bpf: Null checks for links in bpf_tcp_ca selftests/bpf: Use connect_fd_to_fd in sk_lookup selftests/bpf: Use start_server_addr in sk_lookup selftests/bpf: Use start_server_str in sk_lookup selftests/bpf: Close fd in error path in drop_on_reuseport selftests/bpf: Add ASSERT_OK_FD macro selftests/bpf: Add backlog for network_helper_opts selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m bpf: Remove tst_run from lwt_seg6local_prog_ops. bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU ... ==================== Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-12selftests/proc: add PROCMAP_QUERY ioctl testsAndrii Nakryiko
Extend existing proc-pid-vm.c tests with PROCMAP_QUERY ioctl() API. Test a few successful and negative cases, validating querying filtering and exact vs next VMA logic works as expected. Link: https://lkml.kernel.org/r/20240627170900.1672542-7-andrii@kernel.org Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-12tools: sync uapi/linux/fs.h header into tools subdirAndrii Nakryiko
We need this UAPI header in tools/include subdirectory for using it from BPF selftests. Link: https://lkml.kernel.org/r/20240627170900.1672542-6-andrii@kernel.org Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-12selftests/udmabuf: add tests to verify data after page migrationVivek Kasireddy
Since the memfd pages associated with a udmabuf may be migrated as part of udmabuf create, we need to verify the data coherency after successful migration. The new tests added in this patch try to do just that using 4k sized pages and also 2 MB sized huge pages for the memfd. Successful completion of the tests would mean that there is no disconnect between the memfd pages and the ones associated with a udmabuf. And, these tests can also be augmented in the future to test newer udmabuf features (such as handling memfd hole punch). The idea for these tests comes from a patch by Mike Kravetz here: https://lists.freedesktop.org/archives/dri-devel/2023-June/410623.html v1->v2: (suggestions from Shuah) - Use ksft_* functions to print and capture results of tests - Use appropriate KSFT_* status codes for exit() - Add Mike Kravetz's suggested-by tag Link: https://lkml.kernel.org/r/20240624063952.1572359-10-vivek.kasireddy@intel.com Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Junxiao Chang <junxiao.chang@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-12selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()Tengda Wu
This test verifies that resolve_prog_type() works as expected when `attach_prog_fd` is not passed in. `prog->aux->dst_prog` in resolve_prog_type() is assigned by `attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided. Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will lead to null-pointer-deref. Verify that the null-pointer-deref bug in resolve_prog_type() is fixed. Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com
2024-07-12perf trace: Fix iteration of syscall ids in syscalltbl->entriesHoward Chu
This is a bug found when implementing pretty-printing for the landlock_add_rule system call, I decided to send this patch separately because this is a serious bug that should be fixed fast. I wrote a test program to do landlock_add_rule syscall in a loop, yet perf trace -e landlock_add_rule freezes, giving no output. This bug is introduced by the false understanding of the variable "key" below: ``` for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) { struct syscall *sc = trace__syscall_info(trace, NULL, key); ... } ``` The code above seems right at the beginning, but when looking at syscalltbl.c, I found these lines: ``` for (i = 0; i <= syscalltbl_native_max_id; ++i) if (syscalltbl_native[i]) ++nr_entries; entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries); ... for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) { if (syscalltbl_native[i]) { entries[j].name = syscalltbl_native[i]; entries[j].id = i; ++j; } } ``` meaning the key is merely an index to traverse the syscall table, instead of the actual syscall id for this particular syscall. So if one uses key to do trace__syscall_info(trace, NULL, key), because key only goes up to trace->sctbl->syscalls.nr_entries, for example, on my X86_64 machine, this number is 373, it will end up neglecting all the rest of the syscall, in my case, everything after `rseq`, because the traversal will stop at 373, and `rseq` is the last syscall whose id is lower than 373 in tools/perf/arch/x86/include/generated/asm/syscalls_64.c: ``` ... [334] = "rseq", [424] = "pidfd_send_signal", ... ``` The reason why the key is scrambled but perf trace works well is that key is used in trace__syscall_info(trace, NULL, key) to do trace->syscalls.table[id], this makes sure that the struct syscall returned actually has an id the same value as key, making the later bpf_prog matching all correct. After fixing this bug, I can do perf trace on 38 more syscalls, and because more syscalls are visible, we get 8 more syscalls that can be augmented. before: perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" after perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" TL;DR: These are the new syscalls that can be augmented Reusing "openat" BPF sys_enter augmenter for "open_tree" Reusing "openat" BPF sys_enter augmenter for "openat2" Reusing "openat" BPF sys_enter augmenter for "mount_setattr" Reusing "openat" BPF sys_enter augmenter for "move_mount" Reusing "open" BPF sys_enter augmenter for "fsopen" Reusing "openat" BPF sys_enter augmenter for "fspick" Reusing "openat" BPF sys_enter augmenter for "faccessat2" Reusing "openat" BPF sys_enter augmenter for "fchmodat2" as for the perf trace output: before perf $ perf trace -e faccessat2 --max-events=1 [no output] after perf $ ./perf trace -e faccessat2 --max-events=1 0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0 P.S. The reason why this bug was not found in the past five years is probably because it only happens to the newer syscalls whose id is greater, for instance, faccessat2 of id 439, which not a lot of people care about when using perf trace. [Arnaldo]: notes That and the fact that the BPF code was hidden before having to use -e, that got changed kinda recently when we switched to using BPF skels for augmenting syscalls in 'perf trace': ⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c a9f4c6c999008c92 perf trace: Collect sys_nanosleep first argument 29d16de26df17e94 perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h 5069211e2f0b47e7 perf trace: Use the right bpf_probe_read(_str) variant for reading user data 33b725ce7b988756 perf trace: Avoid compile error wrt redefining bool 7d9642311b6d9d31 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two. 262b54b6c9396823 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two. 1836480429d173c0 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr) cd2cece61ac5f900 perf trace: Tidy comments related to BPF + syscall augmentation 5e6da6be3082f77b perf trace: Migrate BPF augmentation to use a skeleton ⬢[acme@toolbox perf-tools-next]$ ⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be3082f77b | head -1 5e6da6be3082f77b (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10) ⬢[acme@toolbox perf-tools-next]$ I.e. from August, 2023. One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all it needs is available on the system. I simplified the code to not expose the 'struct syscall' outside of tools/perf/util/syscalltbl.c, instead providing a function to go from the index to the syscall id: int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx); Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1 Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf dso: Fix address sanitizer buildIan Rogers
Various files had been missed from having accessor functions added for the sake of dso reference count checking. Add the function calls and missing dso accessor functions. Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yunseong Kim <yskelg@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf mem: Warn if memory events are not supported on all CPUsLeo Yan
It is possible that memory events are not supported on all CPUs. Prints a warning by dumping the enabled CPU maps in this case. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf arm-spe: Support multiple Arm SPE PMUsLeo Yan
A platform can have more than one Arm SPE PMU. For example, a system with multiple clusters may have each cluster enabled with its own Arm SPE instance. In such case, the PMU devices will be named 'arm_spe_0', 'arm_spe_1', and so on. Currently, the tool only supports 'arm_spe_0'. This commit extends support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf build x86: Fix SC2034 error in syscalltbl.shHaoze Xie
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_' when reading from '$sorted_table'. This change allows the script to pass tests of ShellCheck before and after version 0.7.2 at the same time. When building in arch x86, syscalltbl.sh got a ShellCheck warning, which makes compilation error: In arch/x86/entry/syscalls/syscalltbl.sh line 27: while read nr _abi name entry _compat; do ^-^ SC2034: abi appears unused. Verify use (or export if used externally). ^----^ SC2034: compat appears unused. Verify use (or export if used externally). The script reads unused param abi and compat. It uses format '_xxx' to indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2. According to SC2034, the more general way of writing is to use directly '_' to indicate discarding vars. 'entry' is also replaced by '_' because it just happens to be defined in emit function, otherwise it will lead to some misunderstandings. Link: https://www.shellcheck.net/wiki/SC2034 Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf record: Fix memset out-of-range errorHaoze Xie
Modified the object of 'memset' from '&lost.lost' to '&lost' in record__read_lost_samples. This allows 'memset' to access memory properly without causing out-of-bounds problems. The problems got from builtin-record.c are: In file included from /usr/include/string.h:495, from util/parse-events.h:13, from builtin-record.c:14: In function 'memset', inlined from 'record__read_lost_samples' at builtin-record.c:1958:6, inlined from '__cmd_record.constprop' at builtin-record.c:2817:2: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error: '__builtin_memset' offset [17, 64] from the object at 'lost' is out of the bounds of referenced subobject 'lost' with type 'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds] 71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The error arised when performing a memset operation on the 'lost' variable, the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64 and 16. Fixes: 6c1785cd75ef ("perf record: Ensure space for lost samples") Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add --fuzzy-name option for fuzzy matching in task namesMadadi Vineeth Reddy
The --fuzzy-name option can be used if fuzzy name matching is required. For example, "taskname" can be matched to any string that contains "taskname" as its substring. Sample output for --task-name wdav --fuzzy-name ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs Suggested-by: Chen Yu <yu.c.chen@intel.com> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Link: https://lore.kernel.org/r/20240707182716.22054-4-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add support for multiple task names using CSVMadadi Vineeth Reddy
To track the scheduling patterns of multiple tasks simultaneously, multiple task names can be specified using a comma separator without any whitespace. Sample output for --task-name perf,wdavdaemon ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 ... . *- . . . . . . 131041.395649 secs . . . . . . . *X2 131041.403969 secs X2 => perf:70211 . . . . . . . *- 131041.404006 secs Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-3-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add task-name option to filter the output mapMadadi Vineeth Reddy
By default, perf sched map prints sched-in events for all the tasks which may not be required all the time as it prints lot of symbols and rows to the terminal. With --task-name option, one could specify the specific task name for which the map has to be shown. This would help in analyzing the CPU usage patterns easier for that specific task. Since multiple PID's might have the same task name, using task-name filter would be more useful for debugging. For other tasks, instead of printing the symbol, '-' is printed and the same '.' is used to represent idle. '-' is used instead of symbol for other tasks because it helps in clear visualization of task of interest and secondly the symbol itself doesn't mean anything because the sched-in of that symbol will not be printed(first sched-in contains pid and the corresponding symbol). When using the --task-name option, the sched-out time is represented by a '*-'. Since not all task sched-in events are printed, the sched-out time of the relevant task might be lost. This representation ensures that the sched-out time of the interested task is not overlooked. 6.10.0-rc1 ========== *A0 131040.639793 secs A0 => migration/0:19 *. 131040.639801 secs . => swapper:0 . *B0 131040.639830 secs B0 => migration/1:24 . *. 131040.639836 secs . . *C0 131040.640108 secs C0 => migration/2:30 . . *. 131040.640163 secs . . . *D0 131040.640386 secs D0 => migration/3:36 . . . *. 131040.640395 secs 6.10.0-rc1 + patch (--task-name wdavdaemon) ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 - *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs . . B0 . D0 . *- . 131040.641583 secs Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep againDaniel Borkmann
Revert commit 90dc946059b7 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c179a377 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] #89/11 fexit_bpf2bpf/func_replace_global_func:OK #89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK #89/13 fexit_bpf2bpf/func_replace_progmap:OK #89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
2024-07-12Merge patch series "riscv: Apply Zawrs when available"Palmer Dabbelt
Andrew Jones <ajones@ventanamicro.com> says: Zawrs provides two instructions (wrs.nto and wrs.sto), where both are meant to allow the hart to enter a low-power state while waiting on a store to a memory location. The instructions also both wait an implementation-defined "short" duration (unless the implementation terminates the stall for another reason). The difference is that while wrs.sto will terminate when the duration elapses, wrs.nto, depending on configuration, will either just keep waiting or an ILL exception will be raised. Linux will use wrs.nto, so if platforms have an implementation which falls in the "just keep waiting" category (which is not expected), then it should _not_ advertise Zawrs in the hardware description. Like wfi (and with the same {m,h}status bits to configure it), when wrs.nto is configured to raise exceptions it's expected that the higher privilege level will see the instruction was a wait instruction, do something, and then resume execution following the instruction. For example, KVM does configure exceptions for wfi (hstatus.VTW=1) and therefore also for wrs.nto. KVM does this for wfi since it's better to allow other tasks to be scheduled while a VCPU waits for an interrupt. For waits such as those where wrs.nto/sto would be used, which are typically locks, it is also a good idea for KVM to be involved, as it can attempt to schedule the lock holding VCPU. This series starts with Christoph's addition of the riscv smp_cond_load_relaxed function which applies wrs.sto when available. That patch has been reworked to use wrs.nto and to use the same approach as Arm for the wait loop, since we can't have arbitrary C code between the load-reserved and the wrs. Then, hwprobe support is added (since the instructions are also usable from usermode), and finally KVM is taught about wrs.nto, allowing guests to see and use the Zawrs extension. We still don't have test results from hardware, and it's not possible to prove that using Zawrs is a win when testing on QEMU, not even when oversubscribing VCPUs to guests. However, it is possible to use KVM selftests to force a scenario where we can prove Zawrs does its job and does it well. [4] is a test which does this and, on my machine, without Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25 seconds. This series is also available here [1]. In order to use QEMU for testing a build with [2] is needed. In order to enable guests to use Zawrs with KVM using kvmtool, the branch at [3] may be used. [1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/ [2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/ [3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/ [4] https://github.com/jones-drew/linux/commit/cb2beccebcece10881db842ed69bdd5715cfab5d Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com * b4-shazam-merge: KVM: riscv: selftests: Add Zawrs extension to get-reg-list test KVM: riscv: Support guest wrs.nto riscv: hwprobe: export Zawrs ISA extension riscv: Add Zawrs support for spinlocks dt-bindings: riscv: Add Zawrs ISA extension description riscv: Provide a definition for 'pause' Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12KVM: riscv: selftests: Add Zawrs extension to get-reg-list testAndrew Jones
KVM RISC-V allows the Zawrs extension for the Guest/VM, so add it to the get-reg-list test. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240426100820.14762-14-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12Merge tag 'loongarch-kvm-6.11' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.11 1. Add ParaVirt steal time support. 2. Add some VM migration enhancement. 3. Add perf kvm-stat support for loongarch.
generated by cgit (git 2.34.1) at 2025-07-15 18:48:30 +0000