summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2025-04-25tools/hv: update route parsing in kvp daemonOlaf Hering
After recent changes in the VM network stack, the host fails to display the IP addresses of the VM. As a result the "IP Addresses" column in the "Networking" tab in the Windows Hyper-V Manager is empty. This is caused by a change in the expected output of the "ip route show" command. Previously the gateway address was shown in the third row. Now the gateway addresses might be split into several lines of output. As a result, the string "ra" instead of an IP address is sent to the host. To me more specific, a VM with the wellknown wicked network managing tool still shows the expected output in recent openSUSE Tumbleweed snapshots: ip a show dev uplink;ip -4 route show;ip -6 route show 2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ... link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink valid_lft forever preferred_lft forever inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll valid_lft forever preferred_lft forever default via 1.2.3.254 dev uplink proto dhcp 1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4 fe80::/64 dev uplink proto kernel metric 256 pref medium default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp... default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e... A similar VM, but with NetworkManager as network managing tool: ip a show dev eth0;ip -4 route show;ip -6 route show 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP... link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ... valid_lft 1022sec preferred_lft 1022sec inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute valid_lft forever preferred_lft forever default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100 1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100 fe80::/64 dev eth0 proto kernel metric 1024 pref medium default proto ra metric 20100 pref medium nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1 nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1 Adjust the route parsing to use a single line for each line of output. Also use a single shell invocation to retrieve both IPv4 and IPv6 information. The actual IP addresses are expected after the "via" keyword. Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Link: https://lore.kernel.org/r/20241202102235.9701-1-olaf@aepfle.de Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20241202102235.9701-1-olaf@aepfle.de>
2025-04-24Merge tag 'landlock-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fixes from Mickaël Salaün: "Fix some Landlock audit issues, add related tests, and updates documentation" * tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Update log documentation landlock: Fix documentation for landlock_restrict_self(2) landlock: Fix documentation for landlock_create_ruleset(2) selftests/landlock: Add PID tests for audit records selftests/landlock: Factor out audit fixture in audit_test landlock: Log the TGID of the domain creator landlock: Remove incorrect warning
2025-04-24x86/insn: Fix CTEST instruction decodingKirill A. Shutemov
insn_decoder_test found a problem with decoding APX CTEST instructions: Found an x86 instruction decoder bug, please report this. ffffffff810021df 62 54 94 05 85 ff ctestneq objdump says 6 bytes, but insn_get_length() says 5 It happens because x86-opcode-map.txt doesn't specify arguments for the instruction and the decoder doesn't expect to see ModRM byte. Fixes: 690ca3a3067f ("x86/insn: Add support for APX EVEX instructions to the opcode map") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v6.10+ Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
2025-04-24Merge tag 'net-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "No fixes from any subtree. Current release - regressions: - net: fix the missing unlock for detached devices Previous releases - regressions: - sched: fix UAF vulnerability in HFSC qdisc - lwtunnel: disable BHs when required - mptcp: pm: defer freeing of MPTCP userspace path manager entries - tipc: fix NULL pointer dereference in tipc_mon_reinit_self() - eth: virtio-net: disable delayed refill when pausing rx Previous releases - always broken: - phylink: fix suspend/resume with WoL enabled and link down - eth: - mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() - xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() - enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS - stmmac: fix dwmac1000 ptp timestamp status offset - pds_core: prevent possible adminq overflow/stuck condition Misc: - a bunch of MAINTAINERS updates" * tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net: stmmac: fix multiplication overflow when reading timestamp net: stmmac: fix dwmac1000 ptp timestamp status offset net: dp83822: Fix OF_MDIO config check pds_core: make wait_context part of q_info pds_core: Remove unnecessary check in pds_client_adminq_cmd() pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result pds_core: Prevent possible adminq overflow/stuck condition net: dsa: mt7530: sync driver-specific behavior of MT7531 variants selftests/tc-testing: Add test for HFSC queue emptying during peek operation net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too net_sched: hfsc: Fix a UAF vulnerability in class handling selftests: mptcp: diag: use mptcp_lib_get_info_value mptcp: pm: Defer freeing of MPTCP userspace path manager entries net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration tipc: fix NULL pointer dereference in tipc_mon_reinit_self() virtio-net: disable delayed refill when pausing rx net: phy: leds: fix memory leak net: phylink: mac_link_(up|down)() clarifications net: phylink: fix suspend/resume with WoL enabled and link down net: lwtunnel: disable BHs when required ...
2025-04-24selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutilsUday Shankar
Some distributions, such as centos stream 9, still have a version of coreutils which does not yet support the %Hr and %Lr formats for stat(1) [1, 2]. Running ublk selftests on these distributions results in the following error in tests that use the _get_disk_dev_t helper: line 23: ?r: syntax error: operand expected (error token is "?r") To better accommodate older distributions, rewrite _get_disk_dev_t to use the much older %t and %T formats for stat instead. [1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114 [2] https://pkgs.org/download/coreutils Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24selftests/fs/mount-notify: test also remove/flush of mntns marksAmir Goldstein
Regression test for FAN_MARK_MNTFS | FAN_MARK_FLUSH bug. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250418193903.2607617-3-amir73il@gmail.com
2025-04-23selftests/tc-testing: Add test for HFSC queue emptying during peek operationCong Wang
Add a selftest to exercise the condition where qdisc implementations like netem or codel might empty the queue during a peek operation. This tests the defensive code path in HFSC that checks the queue length again after peeking to handle this case. Based on the reproducer from Gerrard, improved by Jamal. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250417184732.943057-4-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23selftests: mptcp: diag: use mptcp_lib_get_info_valueGeliang Tang
When running diag.sh in a loop, chk_dump_one will report the following "grep: write error": 13 ....chk 2 cestab [ OK ] grep: write error 14 ....chk dump_one [ OK ] 15 ....chk 2->0 msk in use after flush [ OK ] 16 ....chk 2->0 cestab after flush [ OK ] This error is caused by a broken pipe. When the output of 'ss' is processed by grep, 'head -n 1' will exit immediately after getting the first line, causing the subsequent pipe to close. At this time, if 'grep' is still trying to write data to the closed pipe, it will trigger a SIGPIPE signal, causing a write error. One solution is not to use this problematic "head -n 1" command, but to use mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value of 'token'. Fixes: ba2400166570 ("selftests: mptcp: add a test for mptcp_diag_dump_one") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Gang Yan <yangang@kylinos.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'Ming Lei
'delay_us' shouldn't be added to 'struct dev_ctx' since now it is handled by per-target command line & 'struct fault_inject_ctx'. So remove it. Fixes: 81586652bb1f ("selftests: ublk: add generic_06 for covering fault inject") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250421235947.715272-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-23selftests: ublk: fix recover testMing Lei
When adding recovery test: - 'break' is missed for handling '-g' argument - test name of test_generic_05.sh is wrong So fix the two. Fixes: 57e13a2e8cd2 ("selftests: ublk: support user recovery") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Uday Shankar <ushankar@purestorage.com> Link: https://lore.kernel.org/r/20250421235947.715272-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-23selftests/bpf: Mitigate sockmap_ktls disconnect_after_delete failureIhor Solodrai
"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI after recent merges from netdev: * https://github.com/kernel-patches/bpf/actions/runs/14458537639 * https://github.com/kernel-patches/bpf/actions/runs/14457178732 It happens because disconnect has been disabled for TLS [1], and it renders the test case invalid. Removing all the test code creates a conflict between bpf and bpf-next, so for now only remove the offending assert [2]. The test will be removed later on bpf-next. [1] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/ [2] https://lore.kernel.org/bpf/cfc371285323e1a3f3b006bfcf74e6cf7ad65258@linux.dev/ Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-23perf tools: Fix arm64 build by generating unistd_64.hJames Clark
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources"), arm64 is no longer using a generic syscall header and generates one from the syscall table. Therefore we must also generate the syscall header for arm64 before building Perf. Add it as a dependency to libperf which uses one syscall number. Perf uses more, but as libperf is a dependency of Perf it will be generated for both. Future platforms that need this will have to add their own syscall-y targets in libperf manually. Unfortunately the arch specific files that do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported into the Perf build. But Perf only needs a subset of the generated files anyway, so redefining them is probably the correct thing to do. Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources") Signed-off-by: James Clark <james.clark@linaro.org> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-04-22lib: Ensure prime numbers tests are included in KUnit test runsMark Brown
When the select of PRIME_MUMBERS was removed from it's KUnit test Kconfig nothing was added to the KUnit configs, meaning that when run via the KUnit runner the tests are neither built nor run. Add PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit runner builds the kernel. Fixes: 3f2925174f8b ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
2025-04-21Merge tag 'sched_ext-for-6.15-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Use kvzalloc() so that large exit_dump buffer allocations don't fail easily - Remove cpu.weight / cpu.idle unimplemented warnings which are more annoying than helpful. This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary. Mark it for deprecation * tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Mark SCX_OPS_HAS_CGROUP_WEIGHT for deprecation sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings sched_ext: Use kvzalloc for large exit_dump allocation
2025-04-19Merge tag 'trace-v6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Initialize hash variables in ftrace subops logic The fix that simplified the ftrace subops logic opened a path where some variables could be used without being initialized, and done subtly where the compiler did not catch it. Initialize those variables to the EMPTY_HASH, which is the default hash. - Reinitialize the hash pointers after they are freed Some of the hash pointers in the subop logic were freed but may still be referenced later. To prevent use-after-free bugs, initialize them back to the EMPTY_HASH. - Free the ftrace hashes when they are replaced The fix that simplified the subops logic updated some hash pointers, but left the original hash that they were pointing to where they are no longer used. This caused a memory leak. Free the hashes that are pointed to by the pointers when they are replaced. - Fix size initialization of ftrace direct function hash The ftrace direct function hash used by BPF initialized the hash size incorrectly. It checked the size of items to a hard coded 32, which made the hash bit size of 5. The hash size is supposed to be limited by the bit size of the hash, as the bitmask is allowed to be greater than 5. Rework the size check to first pass the number of elements to fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating the hash. - Fix format output of ftrace_graph_ent_entry event The field depth of the ftrace_graph_ent_entry event is of size 4 but the output showed it as unsigned long and use "%lu". Change it to unsigned int and use "%u" in the print format that is displayed to user space. - Fix the trace event filter on strings Events can be filtered on numbers or string values. The return value checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault() was used to determine if reading the strings would fault or not. It would return fault if the value was non zero, which is basically meant that it was always considering the read as a fault. - Add selftest to test trace event string filtering In order to catch the breakage of the string filtering, add a self test to make sure that it continues to work. * tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: selftests: Add testing a user string to filters tracing: Fix filter string testing ftrace: Fix type of ftrace_graph_ent_entry.depth ftrace: fix incorrect hash size in register_ftrace_direct() ftrace: Free ftrace hashes after they are replaced in the subops code ftrace: Reinitialize hash to EMPTY_HASH after freeing ftrace: Initialize variables for ftrace_startup/shutdown_subops()
2025-04-19Merge tag 'rust-fixes-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Fix missing KASAN LLVM flags on first build (and fix spurious rebuilds) by skipping '--target' - Fix Make < 4.3 build error by using '$(pound)' - Fix UML build error by removing 'volatile' qualifier from io helpers - Fix UML build error by adding 'dma_{alloc,free}_attrs()' helpers - Clean gendwarfksyms warnings by avoiding to export '__pfx' symbols - Clean objtool warning by adding a new 'noreturn' function for 1.86.0 - Disable 'needless_continue' Clippy lint due to new 1.86.0 warnings - Add missing 'ffi' crate to 'generate_rust_analyzer.py' 'pin-init' crate: - Import a couple fixes from upstream" * tag 'rust-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: rust: helpers: Add dma_alloc_attrs() and dma_free_attrs() rust: helpers: Remove volatile qualifier from io helpers rust: kbuild: use `pound` to support GNU Make < 4.3 objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0 rust: kasan/kbuild: fix missing flags on first build rust: disable `clippy::needless_continue` rust: kbuild: Don't export __pfx symbols rust: pin-init: use Markdown autolinks in Rust comments rust: pin-init: alloc: restrict `impl ZeroableOption` for `Box` to `T: Sized` scripts: generate_rust_analyzer: Add ffi crate
2025-04-18Merge tag 'hardening-v6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert Uytterhoeven) - ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh) - ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan Chancellor) - string: Add load_unaligned_zeropad() code path to sized_strscpy() (Peter Collingbourne) - kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo Frascino) - Disable GCC randstruct for COMPILE_TEST * tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib/prime_numbers: KUnit test should not select PRIME_NUMBERS ubsan: Fix panic from test_ubsan_out_of_bounds lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP hardening: Disable GCC randstruct for COMPILE_TEST kasan: Add strscpy() test to trigger tag fault on arm64 string: Add load_unaligned_zeropad() code path to sized_strscpy()
2025-04-18Merge tag 'linux_kselftest-kunit-fixes-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fix from Shuah Khan: "Fixes arch sh kunit qemu_configs script sh.py to honor kunit cmdline" * tag 'linux_kselftest-kunit-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: qemu_configs: SH: Respect kunit cmdline
2025-04-18Merge tag 'linux_kselftest-fixes-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "Fixes dynevent_limitations.tc test failure on dash by detecting and handling bash and dash differences in evaluating \\" * tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tc
2025-04-18cxl: Fix devm host device for CXL fwctl initializationDave Jiang
Testing revealed the following error message for a CXL memdev that has Feature support: [ 56.690430] cxl mem0: Resources present before probing Attach the allocation of cxl_fwctl to the parent device of cxl_memdev. devm_add_* calls for cxl_memdev should not happen before the memdev probe function or outside the scope of the memdev driver. cxl_test missed this bug because cxl_test always arranges for the cxl_mem driver to be loaded before cxl_mock_mem runs. So the driver core always finds the devres list idle in that case. [DJ: Updated subject title and added commit log suggestion from djbw] Fixes: 858ce2f56b52 ("cxl: Add FWCTL support to CXL") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/linux-cxl/6801aea053466_71fe2944c@dwillia2-xfh.jf.intel.com.notmuch/ Link: https://patch.msgid.link/20250418002933.406439-1-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2025-04-18Merge tag 'block-6.15-20250417' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - MD pull via Yu: - fix raid10 missing discard IO accounting (Yu Kuai) - fix bitmap stats for bitmap file (Zheng Qixing) - fix oops while reading all member disks failed during check/repair (Meir Elisha) - NVMe pull via Christoph: - fix scan failure for non-ANA multipath controllers (Hannes Reinecke) - fix multipath sysfs links creation for some cases (Hannes Reinecke) - PCIe endpoint fixes (Damien Le Moal) - use NULL instead of 0 in the auth code (Damien Le Moal) - Various ublk fixes: - Slew of selftest additions - Improvements and fixes for IO cancelation - Tweak to Kconfig verbiage - Fix for page dirtying for blk integrity mapped pages - loop fixes: - buffered IO fix - uevent fixes - request priority inheritance fix - Various little fixes * tag 'block-6.15-20250417' of git://git.kernel.dk/linux: (38 commits) selftests: ublk: add generic_06 for covering fault inject ublk: simplify aborting ublk request ublk: remove __ublk_quiesce_dev() ublk: improve detection and handling of ublk server exit ublk: move device reset into ublk_ch_release() ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io ublk: add ublk_force_abort_dev() ublk: properly serialize all FETCH_REQs selftests: ublk: move creating UBLK_TMP into _prep_test() selftests: ublk: add test_stress_05.sh selftests: ublk: support user recovery selftests: ublk: support target specific command line selftests: ublk: increase max nr_queues and queue depth selftests: ublk: set queue pthread's cpu affinity selftests: ublk: setup ring with IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN selftests: ublk: add two stress tests for zero copy feature selftests: ublk: run stress tests in parallel selftests: ublk: make sure _add_ublk_dev can return in sub-shell selftests: ublk: cleanup backfile automatically selftests: ublk: add io_uring uapi header ...
2025-04-18tracing: selftests: Add testing a user string to filtersSteven Rostedt
Running the following commands was broken: # cd /sys/kernel/tracing # echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter # echo 1 > events/syscalls/sys_enter_openat/enable # ls /proc/$$/maps # cat trace And would produce nothing when it should have produced something like: ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0) Add a test to check this case so that it will be caught if it breaks again. Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-04-18selftests/pcie_bwctrl: Fix test progs listIlpo Järvinen
Commit df6f8c4d72ae ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS") added set_pcie_speed.sh into TEST_PROGS but that script is a helper that is only being called by set_pcie_cooling_state.sh, not a test case itself. When set_pcie_speed.sh is in TEST_PROGS, selftest harness will execute also it leading to bwctrl selftest errors: # selftests: pcie_bwctrl: set_pcie_speed.sh # cat: /cur_state: No such file or directory not ok 2 selftests: pcie_bwctrl: set_pcie_speed.sh # exit=1 Place set_pcie_speed.sh into TEST_FILES instead to have it included into installed test files but not execute it from the test harness. Fixes: df6f8c4d72ae ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250417124529.11391-1-ilpo.jarvinen@linux.intel.com
2025-04-17Merge tag 'net-6.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, CAN and Netfilter. Current release - regressions: - two fixes for the netdev per-instance locking - batman-adv: fix double-hold of meshif when getting enabled Current release - new code bugs: - Bluetooth: increment TX timestamping tskey always for stream sockets - wifi: static analysis and build fixes for the new Intel sub-driver Previous releases - regressions: - net: fib_rules: fix iif / oif matching on L3 master (VRF) device - ipv6: add exception routes to GC list in rt6_insert_exception() - netfilter: conntrack: fix erroneous removal of offload bit - Bluetooth: - fix sending MGMT_EV_DEVICE_FOUND for invalid address - l2cap: process valid commands in too long frame - btnxpuart: Revert baudrate change in nxp_shutdown Previous releases - always broken: - ethtool: fix memory corruption during SFP FW flashing - eth: - hibmcge: fixes for link and MTU handling, pause frames etc - igc: fixes for PTM (PCIe timestamping) - dsa: b53: enable BPDU reception for management port Misc: - fixes for Netlink protocol schemas" * tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps net: ethernet: mtk_eth_soc: reapply mdc divider on reset net: ti: icss-iep: Fix possible NULL pointer dereference for perout request net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame() net: ti: icssg-prueth: Fix kernel warning while bringing down network interface netfilter: conntrack: fix erronous removal of offload bit net: don't try to ops lock uninitialized devs ptp: ocp: fix start time alignment in ptp_ocp_signal_set net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails net: dsa: free routing table on probe failure net: dsa: clean up FDB, MDB, VLAN entries on unbind net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered net: txgbe: fix memory leak in txgbe_probe() error path net: bridge: switchdev: do not notify new brentries as changed net: b53: enable BPDU reception for management port netlink: specs: rt-neigh: prefix struct nfmsg members with ndm netlink: specs: rt-link: adjust mctp attribute naming netlink: specs: rtnetlink: attribute naming corrections ...
2025-04-16Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "31 hotfixes. 9 are cc:stable and the remainder address post-6.15 issues or aren't considered necessary for -stable kernels. 22 patches are for MM, 9 are otherwise" * tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) MAINTAINERS: update HUGETLB reviewers mm: fix apply_to_existing_page_range() selftests/mm: fix compiler -Wmaybe-uninitialized warning alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate mailmap: add entry for Jean-Michel Hautbois mm: (un)track_pfn_copy() fix + doc improvements mm: fix filemap_get_folios_contig returning batches of identical folios mm/hugetlb: add a line break at the end of the format string selftests: mincore: fix tmpfs mincore test failure mm/hugetlb: fix set_max_huge_pages() when there are surplus pages mm/cma: report base address of single range correctly mm: page_alloc: speed up fallbacks in rmqueue_bulk() kunit: slub: add module description mm/kasan: add module decription ucs2_string: add module description zlib: add module description fpga: tests: add module descriptions samples/livepatch: add module descriptions ASN.1: add module description mm/vma: add give_up_on_oom option on modify/merge, use in uffd release ...
2025-04-16selftests: ublk: add generic_06 for covering fault injectUday Shankar
Add one simple fault inject target, and verify if an application using ublk device sees an I/O error quickly after the ublk server dies. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250416035444.99569-9-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: move creating UBLK_TMP into _prep_test()Ming Lei
test may exit early because of missing program or not having required feature before calling _prep_test(), then $UBLK_TMP isn't cleaned. Fix it by moving creating $UBLK_TMP into _prep_test(), any resources created since _prep_test() will be cleaned by _cleanup_test(). Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: add test_stress_05.shMing Lei
Add test_stress_05.sh for covering removing device with recovery enabled. io-hang has been observed with the following patch: https://lore.kernel.org/linux-block/20250403-ublk_timeout-v3-1-aa09f76c7451@purestorage.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-13-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: support user recoveryMing Lei
Add user recovery feature. Meantime add user recovery test: generic_04 and generic_05(zero copy) Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-12-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: support target specific command lineMing Lei
Support target specific command line for making related command line code handling more readable & clean. Also helps for adding new features. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-11-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: increase max nr_queues and queue depthMing Lei
Increase max nr_queues to 32, and queue depth to 1024. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-10-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: set queue pthread's cpu affinityMing Lei
In NUMA machine, ublk IO performance is very sensitive with queue pthread's affinity setting. Retrieve queue's affinity and select the 1st cpu as queue thread's sched affinity, and it is observed that single cpu task affinity can get stable & good performance if client application is put on proper cpu. Dump this info when adding one ublk device. Use shmem to communicate queue's tid between parent and daemon. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-9-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: setup ring with ↵Ming Lei
IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN It is observed that this way is more efficient for fast nvme backing file. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-8-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: add two stress tests for zero copy featureMing Lei
Add stress_03 & stress_04 for covering zero copy feature. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: run stress tests in parallelMing Lei
Run stress tests in parallel, meantime add shell local function to simplify the two stress tests. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: make sure _add_ublk_dev can return in sub-shellMing Lei
Detach ublk daemon from the starting process completely by double-fork and clearing its process group, so that `_add_ublk_dev` can return from sub-shell. Then it is more friendly for writing shell test script for adding/recovering ublk device. Prepare for running ublk test in parallel. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: cleanup backfile automaticallyMing Lei
Use global array of $UBLK_BACKFILES for storing all backfile name, then clean them automatically. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: add io_uring uapi headerMing Lei
Add io_uring UAPI header so that ublk can work with latest uapi definition. Fix the following build failure: stripe.c: In function ‘stripe_to_uring_op’: stripe.c:120:29: error: ‘IORING_OP_READV_FIXED’ undeclared (first use in this function); did you mean ‘IORING_OP_READ_FIXED’? 120 | return zc ? IORING_OP_READV_FIXED : IORING_OP_READV; | ^~~~~~~~~~~~~~~~~~~~~ | IORING_OP_READ_FIXED Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Fixes: 57ed58c13256 ("selftests: ublk: enable zero copy for stripe target") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16selftests: ublk: fix ublk_find_tgt()Ming Lei
Bounds check for iterator variable `i` is missed, so add it and fix ublk_find_tgt(). Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250412023035.2649275-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-16tools: ynl-gen: make sure we validate subtype of array-nestJakub Kicinski
ArrayNest AKA indexed-array support currently skips inner type validation. We count the attributes and then we parse them, make sure we call validate, too. Otherwise buggy / unexpected kernel response may lead to crashes. Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16tools: ynl-gen: individually free previous values on double setJakub Kicinski
When user calls request_attrA_set() multiple times (for the same attribute), and attrA is of type which allocates memory - we try to free the previously associated values. For array types (including multi-attr) we have only freed the array, but the array may have contained pointers. Refactor the code generation for free attr and reuse the generated lines in setters to flush out the previous state. Since setters are static inlines in the header we need to add forward declarations for the free helpers of pure nested structs. Track which types get used by arrays and include the right forwad declarations. At least ethtool string set and bit set would not be freed without this. Tho, admittedly, overriding already set attribute twice is likely a very very rare thing to do. Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16tools: ynl-gen: move local vars after the opening bracketJakub Kicinski
The "function writing helper" tries to put local variables between prototype and the opening bracket. Clearly wrong, but up until now nothing actually uses it to write local vars so it wasn't noticed. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16tools: ynl-gen: don't declare loop iterator in placeJakub Kicinski
The codegen tries to follow the "old" C style and declare loop iterators at the start of the block / function. Only nested request handling breaks this style, so adjust it. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250414211851.602096-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tcSteven Rostedt
bash and dash evaluate variables differently. dash will evaluate '\\' every time it is read whereas bash does not. TEST_STRING="$TEST_STRING \\$i" echo $TEST_STRING With i=123 On bash, that will print "\123" but on dash, that will print the escape sequence of \123 as the \ will be interpreted again in the echo. The dynevent_limitations.tc test created a very large list of arguments to test the maximum number of arguments to pass to the dynamic events file. It had a loop of: TEST_STRING=$1 # Acceptable for i in `seq 1 $MAX_ARGS`; do TEST_STRING="$TEST_STRING \\$i" done echo "$TEST_STRING" >> dynamic_events This worked fine on bash, but when run on dash it failed. This was due to dash interpreting the "\\$i" twice. Once when it was assigned to TEST_STRING and a second time with the echo $TEST_STRING. bash does not process the backslash more than the first time. To solve this, assign a double backslash to a variable "bs" and then echo it to "ts". If "ts" changes, it is dash, if not, it is bash. Then update "bs" accordingly, and use that to assign TEST_STRING. Now this could possibly just check if "$BASH" is defined or not, but this is testing if the issue exists and not just which shell is being used. Link: https://lore.kernel.org/r/20250414210900.4de5e8b9@gandalf.local.home Fixes: 581a7b26ab364 ("selftests/ftrace: Add dynamic events argument limitation test case") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/350786cc-9e40-4396-ab95-4f10d69122fb@sirena.org.uk/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-04-15selftests: fib_rule_tests: Add VRF match testsIdo Schimmel
Add tests for FIB rules that match on iif / oif being a VRF device. Test both good and bad flows. With previous patch ("net: fib_rules: Fix iif / oif matching on L3 master device"): # ./fib_rule_tests.sh [...] Tests passed: 328 Tests failed: 0 Without it: # ./fib_rule_tests.sh [...] Tests passed: 324 Tests failed: 4 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15lib/prime_numbers: KUnit test should not select PRIME_NUMBERSGeert Uytterhoeven
Enabling a (modular) test should not silently enable additional kernel functionality, as that may increase the attack vector of a product. Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS instead of selecting it. After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build modules for all appropriate tests for ones system, without pulling in extra unwanted functionality, while still allowing a tester to manually enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in tools/testing/selftests/lib/config for the latter use case. Fixes: 313b38a6ecb46db4 ("lib/prime_numbers: convert self-test to KUnit") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Tamir Duberstein <tamird@gmail.com> Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org Signed-off-by: Kees Cook <kees@kernel.org>
2025-04-14Merge tag 'perf-tools-fixes-for-v6.15-2025-04-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A couple of fixes and the usual tooling header updates: - fix a build error on ARM64 when libunwind is requested - fix an infinite loop with branch stack on AMD Zen3 - sync tooling headers with the kernel source" * tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf tools: Remove evsel__handle_error_quirks() perf libunwind arm64: Fix missing close parens in an if statement tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources tools headers: Update the x86 headers with the kernel sources tools headers: Update the linux/unaligned.h copy with the kernel sources tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources tools headers: Update the uapi/linux/prctl.h copy with the kernel sources tools headers: Update the syscall table with the kernel sources tools headers: Update the VFS headers with the kernel sources tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources tools headers: Update the socket headers with the kernel sources tools headers: Update the KVM headers with the kernel sources
2025-04-14kunit: qemu_configs: SH: Respect kunit cmdlineThomas Weißschuh
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which completely disregards the cmdline passed from the bootloader/QEMU in favor of the builtin CONFIG_CMDLINE. However the kunit tool needs to pass arguments to the in-kernel kunit core, for filters and other runtime parameters. Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected. Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de Fixes: 8110a3cab05e ("kunit: tool: Add support for SH under QEMU") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-04-14objtool/rust: add one more `noreturn` Rust function for Rust 1.86.0Miguel Ojeda
Starting with Rust 1.86.0 (see upstream commit b151b513ba2b ("Insert null checks for pointer dereferences when debug assertions are enabled") [1]), under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`, one may trigger a new `objtool` warning: rust/kernel.o: warning: objtool: _R..._6kernel9workqueue6system() falls through to next function _R...9workqueue14system_highpri() due to a call to the `noreturn` symbol: core::panicking::panic_null_pointer_dereference Thus add it to the list so that `objtool` knows it is actually `noreturn`. See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") for more details. Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") Link: https://github.com/rust-lang/rust/commit/b151b513ba2b65c7506ec1a80f2712bbd09154d1 [1] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250413002338.1741593-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-04-13kunit: configs: Add some Cirrus Logic modules to all_testsRichard Fitzgerald
Add CONFIG_I2C and CONFIG_SND_SOC_CS35L56_I2C to all_tests.config so that Cirrus Logic modules with KUnit tests will be built. The CS35L56 driver doesn't currently have any KUnit tests itself, but it enables two other libraries that have KUnit tests: cs_dsp and cs-amp-lib. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250411123608.1676462-2-rf@opensource.cirrus.com Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 12:31:11 +0000