| Age | Commit message (Collapse) | Author |
|---|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Not all configurations support namespaces, so skip the tests where
necessary. Also if the tests are running without privileges.
Enable the namespace configuration for those architectures where it is not
enabled by default.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-12-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-11-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-10-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-9-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-8-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-7-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-6-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-5-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-4-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add fstat(), fstatat() and lstat(). All of them use the existing implementation
based on statx().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-3-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The %m format can be used to format the current errno.
It is non-standard but supported by other commonly used libcs like glibc and
musl, so applications do rely on them.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-2-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-1-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The UAPI headers already provide definitions for these symbols.
Using them makes the code shorter, more robust and compatible with
applications using linux/poll.h directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-2-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This is the location regular userspace expects the definition.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250430-poll-v1-1-44b5ceabdeee@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add nolibc support for m68k. Should be helpful for nommu where
linking libc can bloat even hello world to the point where you get
an OOM just trying to load it.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20250426224738.284874-1-daniel@0x0f.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Prevent regressions of issues validates by the header check by always
running it together with the nolibc selftests.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-3-011576b6ed6f@linutronix.de
|
|
Inclusion of any nolibc header file should also bring all other headers.
On the other hand it should also be possible to include any nolibc header
files
in any order.
Currently this is implemented by including the catch-all nolibc.h after the
headers own definitions.
This is problematic if one nolibc header depends on another one.
The first header has to include the other one before defining any symbols.
That in turn will include the rest of nolibc while the current header has
not defined anything yet. If any other part of nolibc depends on
definitions from the current header, errors are encountered.
This is already the case today. Effectively nolibc can only be included in
the order of nolibc.h.
Restructure the way "nolibc.h" is included.
Move it to the beginning of the header files and before the include guards.
Now any header will behave exactly like "nolibc.h" while the include
guards prevent any duplicate definitions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-2-011576b6ed6f@linutronix.de
|
|
Each nolibc header should be valid for inclusion irrespective of any
special ordering requirements.
Add a new make target, based on the old kbuild "make header_check" target
to validate this requirement.
For now the check fails, but the following commits will fix the issues.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250424-nolibc-header-check-v1-1-011576b6ed6f@linutronix.de
|
|
Add a simple test for generating coredumps via AF_UNIX sockets.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-9-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add PIDFD_INFO_COREDUMP infrastructure so we can use it in tests.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-8-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There is a spelling mistake in a fail error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250520080657.30726-1-colin.i.king@gmail.com
|
|
The prctl.h ABI header was slightly updated during the development of
the interface. In particular the "immutable" parameter became a bit in
the option argument.
Synchronize prctl.h ABI header again and make use of the definition in
the testsuite and "perf bench futex".
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-5-bigeasy@linutronix.de
|
|
Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-3-bigeasy@linutronix.de
|
|
Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-2-bigeasy@linutronix.de
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix "withouth" to "without"
Fix "instaces" to "instances"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250517032535.1176351-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517020003.1159640-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the allowed_cpus selftest to include a check to validate the
behavior of scx_bpf_select_cpu_and() when invoked via a BPF test_run
call.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://lore.kernel.org/r/20250517011725.1149510-1-sumanth.gavini@yahoo.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add test for covering UBLK_AUTO_BUF_REG_FALLBACK:
- pass '--auto_zc_fallback' to null target, which requires both F_AUTO_BUF_REG
and F_SUPPORT_ZERO_COPY for handling UBLK_AUTO_BUF_REG_FALLBACK
- add ->buf_index() method for returning invalid buffer index to trigger
UBLK_AUTO_BUF_REG_FALLBACK
- add generic_09 for running the test
- add --auto_zc_fallback test in stress_03/stress_04/stress_05
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Enable UBLK_F_AUTO_BUF_REG support for ublk utility by argument `--auto_zc`,
meantime support this feature in null, loop and stripe target code.
Add function test generic_08 for covering basic UBLK_F_AUTO_BUF_REG feature.
Also cover UBLK_F_AUTO_BUF_REG in stress_03, stress_04 and stress_05 test too.
'fio/t/io_uring -p0 /dev/ublkb0' shows that F_AUTO_BUF_REG can improve
IOPS by 50% compared with F_SUPPORT_ZERO_COPY in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__run_io_and_remove() is used in several stress tests for running heavy
IO vs. removing device meantime.
However, sequential `readwrite` is taken in the fio script, which isn't
correct, we should take random IO for saturating ublk device.
Also turns out '--num_jobs=4' isn't stressful enough, so change it to
'--num_jobs=$(nproc)'.
Finally we don't cover single queue test in `test_stress_02.sh`, so add
single queue test which can trigger request tag recycling easier.
With above change the issue in #1 can be reproduced reliably in stress_02.sh.
Link:https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/ #1
Cc: Jared Holzman <jholzman@nvidia.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250519031620.245749-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add the test counts to the JSON output from kunit.py. For example:
...
"git_branch": "kselftest",
"misc":
{
"tests": 2,
"passed": 1.
"failed": 1,
"crashed": 0,
"skipped": 0,
"errors": 0,
}
...
To output the JSON using the following command:
./tools/testing/kunit/kunit.py run example --json
This has been requested by KUnit users. The counts are in a "misc"
field because the JSON output needs to be compliant with the KCIDB
submission guide. There are no counts fields but there is a "misc" field
in the guide.
Link: https://lore.kernel.org/r/20250516201615.1237037-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
|
|
In the sigpipe test, we expect send() to fail, but we do not check if
send() fails with the errno we expect (EPIPE).
Add this check and repeat the send() in case of EINTR as we do in other
tests.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The timeout API uses signals, so we have documented not to use sleep(),
but we can use nanosleep(2) since POSIX.1 explicitly specifies that it
does not interact with signals.
Let's provide timeout_usleep() for that.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-2-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a fairly complete example of rt-link usage. If run without any
arguments it simply lists the interfaces and some of their attrs.
If run with an arg it tries to create and delete a netkit device.
1 # ./tools/net/ynl/samples/rt-link 1
2 Trying to create a Netkit interface
3 Testing error message for policy being bad:
4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy)
5 1: lo: mtu 65536
6 2: wlp0s1: mtu 1500
7 3: enp0s13: mtu 1500
8 4: dummy0: mtu 1500 kind dummy altname one two
9 5: nk0: mtu 1500 kind netkit primary 0 policy forward
10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole
11 Trying to delete a Netkit interface (ifindex 6)
Sample creates the device first, it sets an invalid value for a netkit
attribute to trigger reverse parsing. Line 4 shows the error with the
attribute path correctly generated by YNL.
Then sample fixes the bad attribute and re-issues the request, with
NLM_F_ECHO set. This flag causes the notification to be looped back
to the initiating socket (our socket). Sample parses this notification
to save the ifindex of the created netkit.
Sample then proceeds to list the devices. Line 8 above shows a dummy
device with two alt names. Lines 9 and 10 show the netkit devices
the sample itself created.
The "primary" and "policy" attrs are from inside the netkit submsg.
The string values are auto-generated for the enums by YNL.
To clean up sample deletes the interface it created (line 11).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from including Classic netlink families one by one to excluding.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reverse parsing lets YNL convert bad and missing attr pointers
from extack into a string like "missing attribute nest1.nest2.attr_name".
It's a feature that's unique to YNL C AFAIU (even the Python YNL
can't do nested reverse parsing). Add support for reverse-parsing
of sub-messages.
To simplify the logic and the code annotate the type policies
with extra metadata. Mark the selectors and the messages with
the information we need. We assume that key / selector always
precedes the sub-message while parsing (and also if there are
multiple sub-messages like in rt-link they are interleaved
selector 1 ... submsg 1 ... selector 2 .. submsg 2, not
selector 1 ... selector 2 ... submsg 1 ... submsg 2).
The rt-link sample in a subsequent changes shows reverse parsing
of sub-messages in action.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust parsing and rendering appropriately to make sub-messages work.
Rendering is pretty trivial, as the submsg -> netlink conversion looks
like rendering a nest in which only one attr was set. Only trick
is that we use the enum value of the sub-message rather than the nest
as the type, and effectively skip one layer of nesting. A real double
nested struct would look like this:
[SELECTOR]
[SUBMSG]
[NEST]
[MSG1-ATTR]
A submsg "is" the nest so by skipping I mean:
[SELECTOR]
[SUBMSG]
[MSG1-ATTR]
There is no extra validation in YNL if caller has set the selector
matching the submsg type (e.g. link type = "macvlan" but the nest
attrs are set to carry "veth"). Let the kernel handle that.
Parsing side is a little more specialized as we need to render and
insert a new kind of function which switches between what to parse
based on the selector. But code isn't too complicated.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The easiest (or perhaps only sane) way to support submessages in C
is to treat them as if they were nests. Build fake attributes to
that effect in the codegen. Render the submsg as a big nest of all
possible values.
With this in place the main missing part is to hook in the switch
which selects how to parse based on the key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hook in handling of sub-messages, for now treat them as ignored attrs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for constructing Struct() instances which represent
sub-messages rather than nested attributes.
Restructure the code / indentation to more easily insert
a case where nested reference comes from annotation other
than the 'nested-attributes' property. Make sure we don't
construct the Struct() object from scratch in multiple
places as the constructor will soon have more arguments.
This should cause no functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're about to add some code here for sub-messages.
Factor out the nest-related logic to make the code readable.
No functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility update for 6.16 from Shuah Khan:
"Adds systemd service to run cpupower and changes binding's makefile
to use -lcpupower.
cpupower: add a systemd service to run cpupower
cpupower: do not write DESTDIR to cpupower.service
cpupower: do not call systemctl at install time
cpupower: do not install files to /etc/default/
cpupower: change binding's makefile to use -lcpupower"
* tag 'linux-cpupower-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
cpupower: change binding's makefile to use -lcpupower
cpupower: add a systemd service to run cpupower
|
|
On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance
instead of 36 for starting.
Fix it by checking for Image files, instead of bzImage which ARM does
not seem to have. With this I see all 36 instances running at the same
time in the batch.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
