| Age | Commit message (Collapse) | Author |
|---|
|
Add KVM selftests header files for LoongArch, including processor.h
and kvm_util_arch.h. It mainly contains LoongArch CSR register and page
table entry definition.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add the test counts to the JSON output from kunit.py. For example:
...
"git_branch": "kselftest",
"misc":
{
"tests": 2,
"passed": 1.
"failed": 1,
"crashed": 0,
"skipped": 0,
"errors": 0,
}
...
To output the JSON using the following command:
./tools/testing/kunit/kunit.py run example --json
This has been requested by KUnit users. The counts are in a "misc"
field because the JSON output needs to be compliant with the KCIDB
submission guide. There are no counts fields but there is a "misc" field
in the guide.
Link: https://lore.kernel.org/r/20250516201615.1237037-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a test case to verify x86's bus lock exit functionality, which is now
supported on both Intel and AMD. Trigger bus lock exits by performing a
split-lock access, i.e. an atomic access that splits two cache lines.
Verify that the correct number of bus lock exits are generated, and that
the counter is incremented correctly and at the appropriate time based on
the underlying architecture.
Generate bus locks in both L1 and L2 (if nested virtualization is enabled),
as SVM's functionality in particular requires non-trivial logic to do the
right thing when running nested VMs.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-6-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove llvm dependencies from binaries that do not use llvm libraries.
Filter out libxml2 from llvm dependencies, as it seems that
it is not actually used. This patch reduced link dependencies
for BPF selftests.
The next line was adding llvm dependencies to every target in the
makefile, while the only targets that require those are test
runnners (test_progs, test_progs-no_alu32,...):
```
$(OUTPUT)/$(TRUNNER_BINARY): LDLIBS += $$(LLVM_LDLIBS)
```
Before this change:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffd2c3fd000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fe1dcf89000)
libz.so.1 => /lib64/libz.so.1 (0x00007fe1dcf6f000)
libm.so.6 => /lib64/libm.so.6 (0x00007fe1dce94000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fe1dcddd000)
libxml2.so.2 => /lib64/libxml2.so.2 (0x00007fe1dcc54000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fe1dca00000)
libc.so.6 => /lib64/libc.so.6 (0x00007fe1dc600000)
/lib64/ld-linux-x86-64.so.2 (0x00007fe1dcfb1000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fe1dc9d4000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fe1dcc38000)
After:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffc83370000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f4b87515000)
libz.so.1 => /lib64/libz.so.1 (0x00007f4b874fb000)
libc.so.6 => /lib64/libc.so.6 (0x00007f4b87200000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f4b87444000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4b8753d000)
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250516195522.311769-1-mykyta.yatsenko5@gmail.com
|
|
To pick up changes for other tools/ libraries used by perf and for
header synchronization with the kernel sources originals.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
|
|
In the sigpipe test, we expect send() to fail, but we do not check if
send() fails with the errno we expect (EPIPE).
Add this check and repeat the send() in case of EINTR as we do in other
tests.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The timeout API uses signals, so we have documented not to use sleep(),
but we can use nanosleep(2) since POSIX.1 explicitly specifies that it
does not interact with signals.
Let's provide timeout_usleep() for that.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-2-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a fairly complete example of rt-link usage. If run without any
arguments it simply lists the interfaces and some of their attrs.
If run with an arg it tries to create and delete a netkit device.
1 # ./tools/net/ynl/samples/rt-link 1
2 Trying to create a Netkit interface
3 Testing error message for policy being bad:
4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy)
5 1: lo: mtu 65536
6 2: wlp0s1: mtu 1500
7 3: enp0s13: mtu 1500
8 4: dummy0: mtu 1500 kind dummy altname one two
9 5: nk0: mtu 1500 kind netkit primary 0 policy forward
10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole
11 Trying to delete a Netkit interface (ifindex 6)
Sample creates the device first, it sets an invalid value for a netkit
attribute to trigger reverse parsing. Line 4 shows the error with the
attribute path correctly generated by YNL.
Then sample fixes the bad attribute and re-issues the request, with
NLM_F_ECHO set. This flag causes the notification to be looped back
to the initiating socket (our socket). Sample parses this notification
to save the ifindex of the created netkit.
Sample then proceeds to list the devices. Line 8 above shows a dummy
device with two alt names. Lines 9 and 10 show the netkit devices
the sample itself created.
The "primary" and "policy" attrs are from inside the netkit submsg.
The string values are auto-generated for the enums by YNL.
To clean up sample deletes the interface it created (line 11).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from including Classic netlink families one by one to excluding.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reverse parsing lets YNL convert bad and missing attr pointers
from extack into a string like "missing attribute nest1.nest2.attr_name".
It's a feature that's unique to YNL C AFAIU (even the Python YNL
can't do nested reverse parsing). Add support for reverse-parsing
of sub-messages.
To simplify the logic and the code annotate the type policies
with extra metadata. Mark the selectors and the messages with
the information we need. We assume that key / selector always
precedes the sub-message while parsing (and also if there are
multiple sub-messages like in rt-link they are interleaved
selector 1 ... submsg 1 ... selector 2 .. submsg 2, not
selector 1 ... selector 2 ... submsg 1 ... submsg 2).
The rt-link sample in a subsequent changes shows reverse parsing
of sub-messages in action.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust parsing and rendering appropriately to make sub-messages work.
Rendering is pretty trivial, as the submsg -> netlink conversion looks
like rendering a nest in which only one attr was set. Only trick
is that we use the enum value of the sub-message rather than the nest
as the type, and effectively skip one layer of nesting. A real double
nested struct would look like this:
[SELECTOR]
[SUBMSG]
[NEST]
[MSG1-ATTR]
A submsg "is" the nest so by skipping I mean:
[SELECTOR]
[SUBMSG]
[MSG1-ATTR]
There is no extra validation in YNL if caller has set the selector
matching the submsg type (e.g. link type = "macvlan" but the nest
attrs are set to carry "veth"). Let the kernel handle that.
Parsing side is a little more specialized as we need to render and
insert a new kind of function which switches between what to parse
based on the selector. But code isn't too complicated.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The easiest (or perhaps only sane) way to support submessages in C
is to treat them as if they were nests. Build fake attributes to
that effect in the codegen. Render the submsg as a big nest of all
possible values.
With this in place the main missing part is to hook in the switch
which selects how to parse based on the key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hook in handling of sub-messages, for now treat them as ignored attrs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for constructing Struct() instances which represent
sub-messages rather than nested attributes.
Restructure the code / indentation to more easily insert
a case where nested reference comes from annotation other
than the 'nested-attributes' property. Make sure we don't
construct the Struct() object from scratch in multiple
places as the constructor will soon have more arguments.
This should cause no functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're about to add some code here for sub-messages.
Factor out the nest-related logic to make the code readable.
No functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If I build perf with asan and run Zstd test:
$ make -C tools/perf O=/tmp/perf DEBUG=1 EXTRA_CFLAGS="-O0 -g -fno-omit-frame-pointer -fsanitize=undefined"
$ /tmp/perf/perf test "Zstd perf.data compression/decompression" -vv
83: Zstd perf.data compression/decompression:
...
util/maps.c:1046:5: runtime error: null pointer passed as argument 2, which is declared to never be null
...
The issue was caused by `bsearch`. The patch adds a check to ensure
argument 2 and 3 are not NULL and 0.
Testing with the commands above confirms that the runtime error is
resolved.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303183646.327510-2-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The original PERF_RECORD_COMPRESS is not 8-byte aligned, which can cause
asan runtime error:
# Build with asan
$ make -C tools/perf O=/tmp/perf DEBUG=1 EXTRA_CFLAGS="-O0 -g -fno-omit-frame-pointer -fsanitize=undefined"
# Test success with many asan runtime errors:
$ /tmp/perf/perf test "Zstd perf.data compression/decompression" -vv
83: Zstd perf.data compression/decompression:
...
util/session.c:1959:13: runtime error: member access within misaligned address 0x7f69e3f99653 for type 'union perf_event', which requires 13 byte alignment
0x7f69e3f99653: note: pointer points here
d0 3a 50 69 44 00 00 00 00 00 08 00 bb 07 00 00 00 00 00 00 44 00 00 00 00 00 00 00 ff 07 00 00
^
util/session.c:2163:22: runtime error: member access within misaligned address 0x7f69e3f99653 for type 'union perf_event', which requires 8 byte alignment
0x7f69e3f99653: note: pointer points here
d0 3a 50 69 44 00 00 00 00 00 08 00 bb 07 00 00 00 00 00 00 44 00 00 00 00 00 00 00 ff 07 00 00
^
...
Since there is no way to align compressed data in zstd compression, this
patch add a new event type `PERF_RECORD_COMPRESSED2`, which adds a field
`data_size` to specify the actual compressed data size.
The `header.size` contains the total record size, including the padding
at the end to make it 8-byte aligned.
Tested with `Zstd perf.data compression/decompression`
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303183646.327510-1-ctshao@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility update for 6.16 from Shuah Khan:
"Adds systemd service to run cpupower and changes binding's makefile
to use -lcpupower.
cpupower: add a systemd service to run cpupower
cpupower: do not write DESTDIR to cpupower.service
cpupower: do not call systemctl at install time
cpupower: do not install files to /etc/default/
cpupower: change binding's makefile to use -lcpupower"
* tag 'linux-cpupower-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
cpupower: change binding's makefile to use -lcpupower
cpupower: add a systemd service to run cpupower
|
|
Use MGLRU's debugfs interface to do access tracking instead of
page_idle. The logic to use the page_idle bitmap is left in, as it is
useful for kernels that do not have MGLRU built in.
When MGLRU is enabled, page_idle will report pages as still idle even
after being accessed, as MGLRU doesn't necessarily clear the Idle folio
flag when accessing an idle page, so the test will not attempt to use
page_idle if MGLRU is enabled but otherwise not usable.
Aging pages with MGLRU is much faster than marking pages as idle with
page_idle.
Co-developed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-8-jthoughton@google.com
[sean: print parsed features, not raw string]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
libcgroup.o is built separately from KVM selftests and cgroup selftests,
so different compiler flags used by the different selftests will not
conflict with each other.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-7-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an API in the cgroups library to find the root of a specific
controller. KVM selftests will use the API to find the memory controller.
Search for the controller on both v1 and v2 mounts, as KVM selftests'
usage will be completely oblivious of v1 versus v2.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-6-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests will soon need to use some of the cgroup creation and
deletion functionality from cgroup_util.
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250508184649.2576210-5-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move a handful of helpers out of cgroup_util.c and into test_memcontrol.c
that have nothing to with cgroups in general, in anticipation of making
cgroup_util.c a generic library that can be used by other selftests.
Make read_text() and write_text() non-static so test_memcontrol.c can
use them.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-4-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an option to skip sanity check of number of still idle pages,
and set it by default to skip, in case hypervisor or NUMA balancing
is detected.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-3-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guts of thp_configured() and get_trans_hugepagesz() to
standalone helpers so that the core logic can be reused for other sysfs
files, e.g. to query numa_balancing.
Opportunistically assert that the initial fscanf() read at least one byte,
and add a comment explaining the second call to fscanf().
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-2-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance
instead of 36 for starting.
Fix it by checking for Image files, instead of bzImage which ARM does
not seem to have. With this I see all 36 instances running at the same
time in the batch.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Back in the day, rcutorture was about the only thing that tested off-stack
CPU masks, but now any arm64 system with more than 256 CPUs tests it
full time. In fact, it is necessary to hack the kernel to prevent such
a system from testing off-stack CPU masks. This means that there is
no longer much point in rcutorture going out of its way to test this.
And given the differences in how CPUMASK_OFFSTACK is enabled in x86 and
arm64, rcutorture would need to go out of its way.
This commit therefore removes CONFIG_CPUMASK_OFFSTACK=y (and the
CONFIG_MAXSMP=y required to enable it on x86) from TREE01.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
The TREE01.boot nr_cpus kernel boot parameter has been set to 43 for
more than seven years, but it can cause RCU CPU stall warnings on arm64,
most of the time involving the stop-machine subsystem. This should
not be too surprising, given that this causes 43 vCPUs to spin with
interrupts disabled when there are only eight physical CPUs.
The point of this CPU overcommit is to test the ability of expedited RCU
grace period initialization to handle races with incoming CPUs that have
never previously been online. But limiting to 17 CPUs instead of 43
allows time for this code to be exercised, and eliminates (or at least
greatly reduces) the incidence of RCU CPU stall warnings on arm64.
So this commit therefore sets nr_cpus=17 in TREE01.boot.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Different architectures capitalize their splats differently. Who knew?
This commit therefore checks for both arm64 "Call trace:" and x86
"Call Trace:".
Reported-by: Joel Fernandes <joelagnelf@nvidia.com>
Closes: https://lore.kernel.org/all/553c33d8-2b51-4772-8aef-97b0163bc78e@nvidia.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
This commit adds a --do-rcu-rust parameter to torture.sh, which invokes
a rust_doctests_kernel kunit run. Note that kunit wants a clean source
tree, so this runs "make mrproper", which might come as a surprise to
some users. Should there be a --mrproper parameter to torture.sh to make
the user explicitly ask for it?
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Right now, torture.sh runs normal runs unconditionally, which can be slow
and thus annoying when you only want to test --kcsan or --kasan runs.
This commit therefore adds a --do-normal argument so that "--kcsan
--do-no-kasan --do-no-normal" runs only KCSAN runs. Note that specifying
"--do-no-kasan --do-no-kcsan --do-no-normal" gets normal runs, so you
should not try to use this as a synonym for --do-none.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
When an XDR counted array has a maximum element count, xdrgen adds
a bounds check to the encoder or decoder for that type. But in cases
where the .x provides no maximum element count, such as
struct notify4 {
/* composed from notify_type4 or notify_deviceid_type4 */
bitmap4 notify_mask;
notifylist4 notify_vals;
};
struct CB_NOTIFY4args {
stateid4 cna_stateid;
nfs_fh4 cna_fh;
notify4 cna_changes<>;
};
xdrgen is supposed to omit that bounds check. Some of the Jinja2
templates handle that correctly, but a few are incorrect and leave
the bounds check in place with a maximum of zero, which causes
encoding/decoding of that type to fail unconditionally.
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If perf is running with a benchmark then we want the retirement
latency samples associated with the benchmark rather than from the
system as a whole.
Use the workload's PID to filter out samples that aren't from the
workload or its children.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250430200108.243234-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When running 'make' in tools/testing/selftests/arm64/ without explicitly
setting the OUTPUT variable, the build system will creates test
directories (e.g., /bti) in the root filesystem due to OUTPUT defaulting
to an empty string. This causes unintended pollution of the root directory.
This patch adds proper handling for the OUTPUT variable: Sets OUTPUT
to the current directory (.) if not specified
Signed-off-by: tanze <tanze@kylinos.cn>
Link: https://lore.kernel.org/r/20250515051839.3409658-1-tanze@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When MTE is supported but MTE_ASYMM is not (ID_AA64PFR1_EL1.MTE == 2)
ID_AA64PFR1_EL1.MTE_frac == 0xF indicates MTE_ASYNC is unsupported
and MTE_frac == 0 indicates it is supported.
As MTE_frac was previously unconditionally read as 0 from the guest
and user-space, check that using SET_ONE_REG to set it to 0 succeeds
but does not change MTE_frac from unsupported (0xF) to supported (0).
This is required as values originating from KVM from user-space must
be accepted to avoid breaking migration.
Also, to allow this MTE field to be tested, enable KVM_ARM_CAP_MTE
for the set_id_regs test. No effect on existing tests is expected.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-4-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Explicitly specify LDFLAGS as an argument to CC so that this can be
overridden by the user.
Link: https://lore.kernel.org/all/20250328183858.1417835-3-bmasney@redhat.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Allow overriding the CFLAGS assignment so that the user can pass in
an outside value.
Link: https://lore.kernel.org/all/20250328183858.1417835-2-bmasney@redhat.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
'realpath' is not always available, fallback to 'readlink -f' if is not
available. They seem to work equally well in this context.
Link: https://lore.kernel.org/r/20250318160510.3441646-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
TC needs arrays of nests, but just a put for now.
Fairly straightforward addition.
Link: https://patch.msgid.link/20250513222011.844106-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
There is a known issue that the leader sampling is inconsistent, since
throttle only affect leader, not the slave. The detail is in [1].
To maintain test coverage, this patch sets a tolerance rate of 80% to
accommodate the throttled samples and prevent test failures due to
throttling.
[1] lore.kernel.org/20250328182752.769662-1-ctshao@google.com
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Co-developed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20250430140611.599078-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To increase code coverage, extend the ovpn selftests with the following
cases:
* connect UDP peers using a mix of IPv6 and IPv4 at the transport layer
* run full test with tunnel MTU equal to transport MTU (exercising
IP layer fragmentation)
* ping "LAN IP" served by VPN peer ("LAN behind a client" test case)
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
getaddrinfo() may fail with error code different from EAI_FAIL
or EAI_NONAME, however in this case we still try to free the
results object, thus leading to a crash.
Fix this by bailing out on any possible error.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
The custom syncookie test expects TCPOPT_WINDOW to be 7 based on the
kernel’s behaviour at the time, but the upcoming series [0] will bump
it to 10.
Let's relax the test to allow any valid TCPOPT_WINDOW value in the
range 1–14.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/netdev/20250513193919.1089692-1-edumazet@google.com/ #[0]
Link: https://patch.msgid.link/20250514214021.85187-1-kuniyu@amazon.com
|
