From 781f0766cc41a9dd2e5d118ef4b1d5d89430257b Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 19 Oct 2018 16:14:50 +0800 Subject: USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb/core/quirks.c') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..4d7d948eae63 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit From a77112577667cbda7c6292c52d909636aef31fd9 Mon Sep 17 00:00:00 2001 From: Emmanuel Pescosta Date: Fri, 26 Oct 2018 14:48:09 +0200 Subject: usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb/core/quirks.c') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4d7d948eae63..64df444af229 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -397,6 +397,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair K70 LUX RGB */ + { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, -- cgit From deefd24228a172d1b27d4a9adbfd2cdacd60ae64 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 26 Oct 2018 13:33:15 +0800 Subject: USB: quirks: Add no-lpm quirk for Raydium touchscreens Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/usb/core/quirks.c') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 64df444af229..f9ff03e6af93 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -420,6 +420,11 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Raydium Touchscreen */ + { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, -- cgit