From df78a0c0b67de58934877aad61e0431a2bd0caf1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 1 Jun 2020 23:22:47 -0700 Subject: nl80211: S1G band and channel definitions Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4e6339ab1fce..ad183469f9af 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4437,6 +4437,11 @@ enum nl80211_key_mode { * attribute must be provided as well * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel + * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel + * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel + * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel + * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -4447,6 +4452,11 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_160, NL80211_CHAN_WIDTH_5, NL80211_CHAN_WIDTH_10, + NL80211_CHAN_WIDTH_1, + NL80211_CHAN_WIDTH_2, + NL80211_CHAN_WIDTH_4, + NL80211_CHAN_WIDTH_8, + NL80211_CHAN_WIDTH_16, }; /** @@ -4457,11 +4467,15 @@ enum nl80211_chan_width { * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide + * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide */ enum nl80211_bss_scan_width { NL80211_BSS_CHAN_WIDTH_20, NL80211_BSS_CHAN_WIDTH_10, NL80211_BSS_CHAN_WIDTH_5, + NL80211_BSS_CHAN_WIDTH_1, + NL80211_BSS_CHAN_WIDTH_2, }; /** @@ -4740,6 +4754,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4748,6 +4763,7 @@ enum nl80211_band { NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, NUM_NL80211_BANDS, }; -- cgit From 987021726f9f41a1daf335c57cd7b6261109cdb2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:21 -0700 Subject: net/wireless: nl80211.h: drop duplicate words in comments Drop doubled words in several comments. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-1-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ad183469f9af..f47a7a8d0216 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -363,7 +363,7 @@ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and @@ -383,7 +383,7 @@ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. + * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. @@ -934,7 +934,7 @@ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. * * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the - * the new channel information (Channel Switch Announcement - CSA) + * new channel information (Channel Switch Announcement - CSA) * in the beacon for some time (as defined in the * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the * new channel. Userspace provides the new channel information (using @@ -1113,7 +1113,7 @@ * randomization may be enabled and configured by specifying the * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. - * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in + * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in * the netlink extended ack message. * * To cancel a measurement, close the socket that requested it. @@ -1511,7 +1511,7 @@ enum nl80211_commands { * rates as defined by IEEE 802.11 7.3.2.2 but without the length * restriction (at most %NL80211_MAX_SUPP_RATES). * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station - * to, or the AP interface the station was originally added to to. + * to, or the AP interface the station was originally added to. * @NL80211_ATTR_STA_INFO: information about a station, part of station info * given for %NL80211_CMD_GET_STATION, nested attribute containing * info as possible, see &enum nl80211_sta_info. @@ -2084,7 +2084,7 @@ enum nl80211_commands { * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. * * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported - * supported operating classes. + * operating classes. * * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space * controls DFS operation in IBSS mode. If the flag is included in @@ -2395,7 +2395,7 @@ enum nl80211_commands { * nl80211_txq_stats) * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. * The smaller of this and the memory limit is enforced. - * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the * TXQ queues for this phy. The smaller of this and the packet limit is * enforced. * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes @@ -5652,7 +5652,7 @@ enum nl80211_feature_flags { * enum nl80211_ext_feature_index - bit index of extended features. * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can - * can request to use RRM (see %NL80211_ATTR_USE_RRM) with + * request to use RRM (see %NL80211_ATTR_USE_RRM) with * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * the ASSOC_REQ_USE_RRM flag in the association request even if * NL80211_FEATURE_QUIET is not advertized. @@ -6061,7 +6061,7 @@ enum nl80211_dfs_state { }; /** - * enum enum nl80211_protocol_features - nl80211 protocol features + * enum nl80211_protocol_features - nl80211 protocol features * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting * wiphy dumps (if requested by the application with the attribute * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the -- cgit From 0f55c0c500f2bbfc5cc5590cdf6973b3f64dc195 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 15 Jul 2020 09:43:22 -0700 Subject: net/wireless: wireless.h: drop duplicate word in comments Drop doubled word "threshold" in a comment. Signed-off-by: Randy Dunlap Cc: netdev@vger.kernel.org Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg Link: https://lore.kernel.org/r/20200715164325.9109-2-rdunlap@infradead.org Signed-off-by: Johannes Berg --- include/uapi/linux/wireless.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h index 24f3371ad826..08967b3f19c8 100644 --- a/include/uapi/linux/wireless.h +++ b/include/uapi/linux/wireless.h @@ -914,7 +914,7 @@ union iwreq_data { struct iw_param sens; /* signal level threshold */ struct iw_param bitrate; /* default bit rate */ struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ + struct iw_param rts; /* RTS threshold */ struct iw_param frag; /* Fragmentation threshold */ __u32 mode; /* Operation mode */ struct iw_param retry; /* Retry limits & lifetime */ -- cgit From e3718a611470d311a92c60d4eb535270b49a7108 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Wed, 17 Jun 2020 09:30:33 +0200 Subject: cfg80211/mac80211: add mesh_param "mesh_nolearn" to skip path discovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, before being able to forward a packet between two 802.11s nodes, both a PLINK handshake is performed upon receiving a beacon and then later a PREQ/PREP exchange for path discovery is performed on demand upon receiving a data frame to forward. When running a mesh protocol on top of an 802.11s interface, like batman-adv, we do not need the multi-hop mesh routing capabilities of 802.11s and usually set mesh_fwding=0. However, even with mesh_fwding=0 the PREQ/PREP path discovery is still performed on demand. Even though in this scenario the next hop PREQ/PREP will determine is always the direct 11s neighbor node. The new mesh_nolearn parameter allows to skip the PREQ/PREP exchange in this scenario, leading to a reduced delay, reduced packet buffering and simplifies HWMP in general. mesh_nolearn is still rather conservative in that if the packet destination is not a direct 11s neighbor, it will fall back to PREQ/PREP path discovery. For normal, multi-hop 802.11s mesh routing it is usually not advisable to enable mesh_nolearn as a transmission to a direct but distant neighbor might be worse than reaching that same node via a more robust / higher throughput etc. multi-hop path. Cc: Sven Eckelmann Cc: Simon Wunderlich Signed-off-by: Linus Lüssing Link: https://lore.kernel.org/r/20200617073034.26149-1-linus.luessing@c0d3.blue [fix nl80211 policy to range 0/1 only] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f47a7a8d0216..a83d8faf88ac 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4236,6 +4236,12 @@ enum nl80211_mesh_power_mode { * field. If left unset then the mesh formation field will only * advertise such if there is an active root mesh path. * + * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. + * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that + * this might not be the optimal decision as a multi-hop route might be + * better. So if using this setting you will likely also want to disable + * dot11MeshForwarding and use another mesh routing protocol on top. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -4269,6 +4275,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, NL80211_MESHCONF_CONNECTED_TO_GATE, + NL80211_MESHCONF_NOLEARN, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit From 184eebe664f0e11c485f6d309fe56297b3f75e9e Mon Sep 17 00:00:00 2001 From: Markus Theil Date: Thu, 11 Jun 2020 16:02:37 +0200 Subject: cfg80211/mac80211: add connected to auth server to meshconf Besides information about num of peerings and gate connectivity, the mesh formation byte also contains a flag for authentication server connectivity, that currently cannot be set in the mesh conf. This patch adds this capability, which is necessary to implement 802.1X authentication in mesh mode. Signed-off-by: Markus Theil Link: https://lore.kernel.org/r/20200611140238.427461-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index a83d8faf88ac..f1770e3756f4 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4242,6 +4242,10 @@ enum nl80211_mesh_power_mode { * better. So if using this setting you will likely also want to disable * dot11MeshForwarding and use another mesh routing protocol on top. * + * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -4276,6 +4280,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_PLINK_TIMEOUT, NL80211_MESHCONF_CONNECTED_TO_GATE, NL80211_MESHCONF_NOLEARN, + NL80211_MESHCONF_CONNECTED_TO_AS, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit From 1303a51c24100b3b1915d6f9072fe5ae5bb4c5f6 Mon Sep 17 00:00:00 2001 From: Markus Theil Date: Thu, 11 Jun 2020 16:02:38 +0200 Subject: cfg80211/mac80211: add connected to auth server to station info This patch adds the necessary bits to later query the auth server flag for every peer from iw. Signed-off-by: Markus Theil Link: https://lore.kernel.org/r/20200611140238.427461-2-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f1770e3756f4..d6b6599a6001 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3370,6 +3370,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) * of STA's association + * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a + * authentication server (u8, 0 or 1) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3417,6 +3419,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_AIRTIME_WEIGHT, NL80211_STA_INFO_AIRTIME_LINK_METRIC, NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + NL80211_STA_INFO_CONNECTED_TO_AS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -- cgit From fd17dba1c860d39f655a3a08387c21e3ceca8c55 Mon Sep 17 00:00:00 2001 From: Veerendranath Jakkam Date: Mon, 20 Jul 2020 13:12:25 +0530 Subject: cfg80211: Add support to advertize OCV support Add a new feature flag that drivers can use to advertize support for Operating Channel Validation (OCV) when using driver's SME for RSNA handshakes. Signed-off-by: Veerendranath Jakkam Link: https://lore.kernel.org/r/20200720074225.8990-1-vjakkam@codeaurora.org Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d6b6599a6001..a3ae2b060a55 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5804,6 +5804,9 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver * can report tx status for control port over nl80211 tx operations. * + * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating + * Channel Validation (OCV) when using driver's SME for RSNA handshakes. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5859,6 +5862,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, + NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit From f96622749a67d40ad5efe8a58d5fc95313097aa0 Mon Sep 17 00:00:00 2001 From: Chung-Hsien Hsu Date: Tue, 23 Jun 2020 08:49:35 -0500 Subject: nl80211: support 4-way handshake offloading for WPA/WPA2-PSK in AP mode Let drivers advertise support for AP-mode WPA/WPA2-PSK 4-way handshake offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag. Extend use of NL80211_ATTR_PMK attribute indicating it might be passed as part of NL80211_CMD_START_AP command, and contain the PSK (which is the PMK, hence the name). The driver is assumed to handle the 4-way handshake by itself in this case, instead of relying on userspace. Signed-off-by: Chung-Hsien Hsu Signed-off-by: Chi-Hsien Lin Link: https://lore.kernel.org/r/20200623134938.39997-2-chi-hsien.lin@cypress.com Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index a3ae2b060a55..631f3a997b3c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -183,18 +183,27 @@ * * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers * can indicate they support offloading EAPOL handshakes for WPA/WPA2 - * preshared key authentication. In %NL80211_CMD_CONNECT the preshared - * key should be specified using %NL80211_ATTR_PMK. Drivers supporting - * this offload may reject the %NL80211_CMD_CONNECT when no preshared - * key material is provided, for example when that driver does not - * support setting the temporal keys through %CMD_NEW_KEY. + * preshared key authentication in station mode. In %NL80211_CMD_CONNECT + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_CONNECT when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. * * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be * set by drivers indicating offload support of the PTK/GTK EAPOL - * handshakes during 802.1X authentication. In order to use the offload - * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS - * attribute flag. Drivers supporting this offload may reject the - * %NL80211_CMD_CONNECT when the attribute flag is not present. + * handshakes during 802.1X authentication in station mode. In order to + * use the offload the %NL80211_CMD_CONNECT should have + * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this + * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is + * not present. + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in AP mode. In %NL80211_CMD_START_AP + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_START_AP when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. * * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK * using %NL80211_CMD_SET_PMK. For offloaded FT support also @@ -2362,10 +2371,11 @@ enum nl80211_commands { * * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. - * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way - * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is - * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute - * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well. + * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide + * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X + * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT + * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME + * is included as well. * * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to * indicate that it supports multiple active scheduled scan requests. @@ -5807,6 +5817,10 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating * Channel Validation (OCV) when using driver's SME for RSNA handshakes. * + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way + * handshake with PSK in AP mode (PSK is passed as part of the start AP + * command). + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5863,6 +5877,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit