From ffb68fc58e9640762be891f9aebe4f5aac615ab3 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 9 Jan 2021 02:01:48 +0200 Subject: net: switchdev: remove the transaction structure from port object notifiers Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Linus Walleij Acked-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: Jakub Kicinski --- net/switchdev/switchdev.c | 42 ++++-------------------------------------- 1 file changed, 4 insertions(+), 38 deletions(-) (limited to 'net/switchdev/switchdev.c') diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 23d868545362..a575bb33ee6c 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -221,7 +221,6 @@ static size_t switchdev_obj_size(const struct switchdev_obj *obj) static int switchdev_port_obj_notify(enum switchdev_notifier_type nt, struct net_device *dev, const struct switchdev_obj *obj, - struct switchdev_trans *trans, struct netlink_ext_ack *extack) { int rc; @@ -229,7 +228,6 @@ static int switchdev_port_obj_notify(enum switchdev_notifier_type nt, struct switchdev_notifier_port_obj_info obj_info = { .obj = obj, - .trans = trans, .handled = false, }; @@ -248,35 +246,10 @@ static int switchdev_port_obj_add_now(struct net_device *dev, const struct switchdev_obj *obj, struct netlink_ext_ack *extack) { - struct switchdev_trans trans; - int err; - ASSERT_RTNL(); - /* Phase I: prepare for obj add. Driver/device should fail - * here if there are going to be issues in the commit phase, - * such as lack of resources or support. The driver/device - * should reserve resources needed for the commit phase here, - * but should not commit the obj. - */ - - trans.ph_prepare = true; - err = switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, - dev, obj, &trans, extack); - if (err) - return err; - - /* Phase II: commit obj add. This cannot fail as a fault - * of driver/device. If it does, it's a bug in the driver/device - * because the driver said everythings was OK in phase I. - */ - - trans.ph_prepare = false; - err = switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, - dev, obj, &trans, extack); - WARN(err, "%s: Commit of object (id=%d) failed.\n", dev->name, obj->id); - - return err; + return switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, + dev, obj, extack); } static void switchdev_port_obj_add_deferred(struct net_device *dev, @@ -307,10 +280,6 @@ static int switchdev_port_obj_add_defer(struct net_device *dev, * @obj: object to add * @extack: netlink extended ack * - * Use a 2-phase prepare-commit transaction model to ensure - * system is not left in a partially updated state due to - * failure from driver/device. - * * rtnl_lock must be held and must not be in atomic section, * in case SWITCHDEV_F_DEFER flag is not set. */ @@ -329,7 +298,7 @@ static int switchdev_port_obj_del_now(struct net_device *dev, const struct switchdev_obj *obj) { return switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_DEL, - dev, obj, NULL, NULL); + dev, obj, NULL); } static void switchdev_port_obj_del_deferred(struct net_device *dev, @@ -449,7 +418,6 @@ static int __switchdev_handle_port_obj_add(struct net_device *dev, bool (*check_cb)(const struct net_device *dev), int (*add_cb)(struct net_device *dev, const struct switchdev_obj *obj, - struct switchdev_trans *trans, struct netlink_ext_ack *extack)) { struct netlink_ext_ack *extack; @@ -462,8 +430,7 @@ static int __switchdev_handle_port_obj_add(struct net_device *dev, if (check_cb(dev)) { /* This flag is only checked if the return value is success. */ port_obj_info->handled = true; - return add_cb(dev, port_obj_info->obj, port_obj_info->trans, - extack); + return add_cb(dev, port_obj_info->obj, extack); } /* Switch ports might be stacked under e.g. a LAG. Ignore the @@ -491,7 +458,6 @@ int switchdev_handle_port_obj_add(struct net_device *dev, bool (*check_cb)(const struct net_device *dev), int (*add_cb)(struct net_device *dev, const struct switchdev_obj *obj, - struct switchdev_trans *trans, struct netlink_ext_ack *extack)) { int err; -- cgit From cf6def51badebbacaedd3999a4d94761197e18b4 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 9 Jan 2021 02:01:49 +0200 Subject: net: switchdev: delete switchdev_port_obj_add_now After the removal of the transactional model inside switchdev_port_obj_add_now, it has no added value and we can just call switchdev_port_obj_notify directly, bypassing this function. Let's delete it. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Reviewed-by: Ido Schimmel Acked-by: Linus Walleij Acked-by: Jiri Pirko Signed-off-by: Jakub Kicinski --- net/switchdev/switchdev.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'net/switchdev/switchdev.c') diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index a575bb33ee6c..3509d362056d 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -242,23 +242,15 @@ static int switchdev_port_obj_notify(enum switchdev_notifier_type nt, return 0; } -static int switchdev_port_obj_add_now(struct net_device *dev, - const struct switchdev_obj *obj, - struct netlink_ext_ack *extack) -{ - ASSERT_RTNL(); - - return switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, - dev, obj, extack); -} - static void switchdev_port_obj_add_deferred(struct net_device *dev, const void *data) { const struct switchdev_obj *obj = data; int err; - err = switchdev_port_obj_add_now(dev, obj, NULL); + ASSERT_RTNL(); + err = switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, + dev, obj, NULL); if (err && err != -EOPNOTSUPP) netdev_err(dev, "failed (err=%d) to add object (id=%d)\n", err, obj->id); @@ -290,7 +282,8 @@ int switchdev_port_obj_add(struct net_device *dev, if (obj->flags & SWITCHDEV_F_DEFER) return switchdev_port_obj_add_defer(dev, obj); ASSERT_RTNL(); - return switchdev_port_obj_add_now(dev, obj, extack); + return switchdev_port_obj_notify(SWITCHDEV_PORT_OBJ_ADD, + dev, obj, extack); } EXPORT_SYMBOL_GPL(switchdev_port_obj_add); -- cgit From bae33f2b5afea932176c1b9096851c81dc0983de Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 9 Jan 2021 02:01:50 +0200 Subject: net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean Acked-by: Linus Walleij Acked-by: Jiri Pirko Reviewed-by: Kurt Kanzenbach # hellcreek Reviewed-by: Linus Walleij # RTL8366RB Reviewed-by: Ido Schimmel Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- net/switchdev/switchdev.c | 46 +++++----------------------------------------- 1 file changed, 5 insertions(+), 41 deletions(-) (limited to 'net/switchdev/switchdev.c') diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 3509d362056d..855a10feef3d 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -100,15 +100,13 @@ static int switchdev_deferred_enqueue(struct net_device *dev, static int switchdev_port_attr_notify(enum switchdev_notifier_type nt, struct net_device *dev, - const struct switchdev_attr *attr, - struct switchdev_trans *trans) + const struct switchdev_attr *attr) { int err; int rc; struct switchdev_notifier_port_attr_info attr_info = { .attr = attr, - .trans = trans, .handled = false, }; @@ -129,34 +127,7 @@ static int switchdev_port_attr_notify(enum switchdev_notifier_type nt, static int switchdev_port_attr_set_now(struct net_device *dev, const struct switchdev_attr *attr) { - struct switchdev_trans trans; - int err; - - /* Phase I: prepare for attr set. Driver/device should fail - * here if there are going to be issues in the commit phase, - * such as lack of resources or support. The driver/device - * should reserve resources needed for the commit phase here, - * but should not commit the attr. - */ - - trans.ph_prepare = true; - err = switchdev_port_attr_notify(SWITCHDEV_PORT_ATTR_SET, dev, attr, - &trans); - if (err) - return err; - - /* Phase II: commit attr set. This cannot fail as a fault - * of driver/device. If it does, it's a bug in the driver/device - * because the driver said everythings was OK in phase I. - */ - - trans.ph_prepare = false; - err = switchdev_port_attr_notify(SWITCHDEV_PORT_ATTR_SET, dev, attr, - &trans); - WARN(err, "%s: Commit of attribute (id=%d) failed.\n", - dev->name, attr->id); - - return err; + return switchdev_port_attr_notify(SWITCHDEV_PORT_ATTR_SET, dev, attr); } static void switchdev_port_attr_set_deferred(struct net_device *dev, @@ -186,10 +157,6 @@ static int switchdev_port_attr_set_defer(struct net_device *dev, * @dev: port device * @attr: attribute to set * - * Use a 2-phase prepare-commit transaction model to ensure - * system is not left in a partially updated state due to - * failure from driver/device. - * * rtnl_lock must be held and must not be in atomic section, * in case SWITCHDEV_F_DEFER flag is not set. */ @@ -519,8 +486,7 @@ static int __switchdev_handle_port_attr_set(struct net_device *dev, struct switchdev_notifier_port_attr_info *port_attr_info, bool (*check_cb)(const struct net_device *dev), int (*set_cb)(struct net_device *dev, - const struct switchdev_attr *attr, - struct switchdev_trans *trans)) + const struct switchdev_attr *attr)) { struct net_device *lower_dev; struct list_head *iter; @@ -528,8 +494,7 @@ static int __switchdev_handle_port_attr_set(struct net_device *dev, if (check_cb(dev)) { port_attr_info->handled = true; - return set_cb(dev, port_attr_info->attr, - port_attr_info->trans); + return set_cb(dev, port_attr_info->attr); } /* Switch ports might be stacked under e.g. a LAG. Ignore the @@ -556,8 +521,7 @@ int switchdev_handle_port_attr_set(struct net_device *dev, struct switchdev_notifier_port_attr_info *port_attr_info, bool (*check_cb)(const struct net_device *dev), int (*set_cb)(struct net_device *dev, - const struct switchdev_attr *attr, - struct switchdev_trans *trans)) + const struct switchdev_attr *attr)) { int err; -- cgit From 4c08c586ff29bda47e3db14da096331d84933f48 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 12 Feb 2021 17:15:51 +0200 Subject: net: switchdev: propagate extack to port attributes When a struct switchdev_attr is notified through switchdev, there is no way to report informational messages, unlike for struct switchdev_obj. Signed-off-by: Vladimir Oltean Reviewed-by: Ido Schimmel Reviewed-by: Florian Fainelli Reviewed-by: Nikolay Aleksandrov Reviewed-by: Grygorii Strashko Signed-off-by: David S. Miller --- net/switchdev/switchdev.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'net/switchdev/switchdev.c') diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 94113ca29dcf..0b84f076591e 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -488,14 +488,18 @@ static int __switchdev_handle_port_attr_set(struct net_device *dev, struct switchdev_notifier_port_attr_info *port_attr_info, bool (*check_cb)(const struct net_device *dev), int (*set_cb)(struct net_device *dev, - const struct switchdev_attr *attr)) + const struct switchdev_attr *attr, + struct netlink_ext_ack *extack)) { + struct netlink_ext_ack *extack; struct net_device *lower_dev; struct list_head *iter; int err = -EOPNOTSUPP; + extack = switchdev_notifier_info_to_extack(&port_attr_info->info); + if (check_cb(dev)) { - err = set_cb(dev, port_attr_info->attr); + err = set_cb(dev, port_attr_info->attr, extack); if (err != -EOPNOTSUPP) port_attr_info->handled = true; return err; @@ -525,7 +529,8 @@ int switchdev_handle_port_attr_set(struct net_device *dev, struct switchdev_notifier_port_attr_info *port_attr_info, bool (*check_cb)(const struct net_device *dev), int (*set_cb)(struct net_device *dev, - const struct switchdev_attr *attr)) + const struct switchdev_attr *attr, + struct netlink_ext_ack *extack)) { int err; -- cgit From dcbdf1350e3312c199dbc6a76f41cf8f67e8c09c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 13 Feb 2021 22:43:17 +0200 Subject: net: bridge: propagate extack through switchdev_port_attr_set The benefit is the ability to propagate errors from switchdev drivers for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- net/switchdev/switchdev.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'net/switchdev/switchdev.c') diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 0b84f076591e..89a36db47ab4 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -100,7 +100,8 @@ static int switchdev_deferred_enqueue(struct net_device *dev, static int switchdev_port_attr_notify(enum switchdev_notifier_type nt, struct net_device *dev, - const struct switchdev_attr *attr) + const struct switchdev_attr *attr, + struct netlink_ext_ack *extack) { int err; int rc; @@ -111,7 +112,7 @@ static int switchdev_port_attr_notify(enum switchdev_notifier_type nt, }; rc = call_switchdev_blocking_notifiers(nt, dev, - &attr_info.info, NULL); + &attr_info.info, extack); err = notifier_to_errno(rc); if (err) { WARN_ON(!attr_info.handled); @@ -125,9 +126,11 @@ static int switchdev_port_attr_notify(enum switchdev_notifier_type nt, } static int switchdev_port_attr_set_now(struct net_device *dev, - const struct switchdev_attr *attr) + const struct switchdev_attr *attr, + struct netlink_ext_ack *extack) { - return switchdev_port_attr_notify(SWITCHDEV_PORT_ATTR_SET, dev, attr); + return switchdev_port_attr_notify(SWITCHDEV_PORT_ATTR_SET, dev, attr, + extack); } static void switchdev_port_attr_set_deferred(struct net_device *dev, @@ -136,7 +139,7 @@ static void switchdev_port_attr_set_deferred(struct net_device *dev, const struct switchdev_attr *attr = data; int err; - err = switchdev_port_attr_set_now(dev, attr); + err = switchdev_port_attr_set_now(dev, attr, NULL); if (err && err != -EOPNOTSUPP) netdev_err(dev, "failed (err=%d) to set attribute (id=%d)\n", err, attr->id); @@ -156,17 +159,19 @@ static int switchdev_port_attr_set_defer(struct net_device *dev, * * @dev: port device * @attr: attribute to set + * @extack: netlink extended ack, for error message propagation * * rtnl_lock must be held and must not be in atomic section, * in case SWITCHDEV_F_DEFER flag is not set. */ int switchdev_port_attr_set(struct net_device *dev, - const struct switchdev_attr *attr) + const struct switchdev_attr *attr, + struct netlink_ext_ack *extack) { if (attr->flags & SWITCHDEV_F_DEFER) return switchdev_port_attr_set_defer(dev, attr); ASSERT_RTNL(); - return switchdev_port_attr_set_now(dev, attr); + return switchdev_port_attr_set_now(dev, attr, extack); } EXPORT_SYMBOL_GPL(switchdev_port_attr_set); -- cgit