|author||Linus Torvalds <email@example.com>||2020-12-16 16:38:41 -0800|
|committer||Linus Torvalds <firstname.lastname@example.org>||2020-12-16 16:38:41 -0800|
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
Diffstat (limited to 'Documentation/arm')
4 files changed, 13 insertions, 22 deletions
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
index f7c3d7d011a2..f4a8c800a457 100644
@@ -29,7 +29,7 @@ GPIOLIB
The following functions now either have a `s3c_` specific variant
or are merged into gpiolib. See the definitions in
- s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
- s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
@@ -86,7 +86,7 @@ between the calls.
- See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list
+ See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
of GPIO pins, and the configuration values for them. This
is included by using #include <mach/regs-gpio.h>
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
index e9a1dc7276b5..14535e5cffb7 100644
@@ -18,7 +18,7 @@ Introduction
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
- included under the arch/arm/mach-s3c2416 directory. Note, while core
+ included under the arch/arm/mach-s3c directory. Note, while core
support for these SoCs is in, work on some of the extra peripherals
and extra interrupts is still ongoing.
@@ -37,19 +37,11 @@ Configuration
- The core support files are located in the platform code contained in
- arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
- This directory should be kept to items shared between the platform
- code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+ The core support files, register, kernel and paltform data are located in the
+ platform code contained in arch/arm/mach-s3c with headers in
- Each cpu has a directory with the support files for it, and the
- machines that carry the device. For example S3C2410 is contained
- in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
- Register, kernel and platform data definitions are held in the
- arch/arm/mach-s3c2410 directory./include/mach
Files in here are either common to all the s3c24xx family,
or are common to only some of them with names to indicate this
@@ -134,7 +126,7 @@ Adding New Machines
should keep this in mind before altering items outside of their own
- Machine definitions should be kept in linux/arch/arm/mach-s3c2410,
+ Machine definitions should be kept in arch/arm/mach-s3c,
and there are a number of examples that can be looked at.
Read the kernel patch submission policies as well as the
@@ -293,7 +285,7 @@ Platform Data
Note, since the code is marked as __init, it should not be
- exported outside arch/arm/mach-s3c2410/, or exported to
+ exported outside arch/arm/mach-s3c/, or exported to
modules via EXPORT_SYMBOL() and related functions.
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
index c84268bd1884..7aaffac89e04 100644
@@ -36,7 +36,7 @@ Board Support
The driver attaches to a platform device, which will need to be
- added by the board specific support file in linux/arch/arm/mach-s3c2410,
+ added by the board specific support file in arch/arm/mach-s3c,
such as mach-bast.c or mach-smdk2410.c
The platform device's platform_data field is only needed if the
@@ -51,9 +51,9 @@ Board Support
- See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
+ See include/linux/platform_data/usb-ohci-s3c2410.h for the
descriptions of the platform device data. An implementation
- can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+ can be found in arch/arm/mach-s3c/simtec-usb.c .
The `struct s3c2410_hcd_info` contains a pair of functions
that get called to enable over-current detection, and to
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
index 5f7cadd7159e..f6e27b07c993 100644
@@ -37,5 +37,4 @@ implementation to configure pins as necessary.
The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
driver or machine to change gpio configuration.
-See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
-on these functions.
+See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions.