Remove dashes from image names: 'BL3-x' --> 'BL3x'

This patch removes the dash character from the image name, to
follow the image terminology in the Trusted Firmware Wiki page:

    https://github.com/ARM-software/arm-trusted-firmware/wiki

Changes apply to output messages, comments and documentation.

non-ARM platform files have been left unmodified.

Change-Id: Ic2a99be4ed929d52afbeb27ac765ceffce46ed76

10 files changed, 34 insertions, 34 deletions

diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index b7cb95aa..0ec7a8d8 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -245,14 +245,14 @@ typedef struct image_desc {
  * This structure represents the superset of information that can be passed to
  * BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
  * populated only if BL2 detects its presence. A pointer to a structure of this
- * type should be passed in X0 to BL3-1's cold boot entrypoint.
+ * type should be passed in X0 to BL31's cold boot entrypoint.
  *
- * Use of this structure and the X0 parameter is not mandatory: the BL3-1
+ * Use of this structure and the X0 parameter is not mandatory: the BL31
  * platform code can use other mechanisms to provide the necessary information
- * about BL3-2 and BL3-3 to the common and SPD code.
+ * about BL32 and BL33 to the common and SPD code.
  *
- * BL3-1 image information is mandatory if this structure is used. If either of
- * the optional BL3-2 and BL3-3 image information is not provided, this is
+ * BL31 image information is mandatory if this structure is used. If either of
+ * the optional BL32 and BL33 image information is not provided, this is
  * indicated by the respective image_info pointers being zero.
  ******************************************************************************/
 typedef struct bl31_params {
diff --git a/include/common/el3_common_macros.S b/include/common/el3_common_macros.S
index 0514e2a2..6f7136f9 100644
--- a/include/common/el3_common_macros.S
+++ b/include/common/el3_common_macros.S
@@ -104,7 +104,7 @@
 
 /* -----------------------------------------------------------------------------
  * This is the super set of actions that need to be performed during a cold boot
- * or a warm boot in EL3. This code is shared by BL1 and BL3-1.
+ * or a warm boot in EL3. This code is shared by BL1 and BL31.
  *
  * This macro will always perform reset handling, architectural initialisations
  * and stack setup. The rest of the actions are optional because they might not
diff --git a/include/lib/cpus/aarch64/cpu_macros.S b/include/lib/cpus/aarch64/cpu_macros.S
index 72c35fb6..f34f0783 100644
--- a/include/lib/cpus/aarch64/cpu_macros.S
+++ b/include/lib/cpus/aarch64/cpu_macros.S
@@ -46,7 +46,7 @@ CPU_MIDR: /* cpu_ops midr */
 CPU_RESET_FUNC: /* cpu_ops reset_func */
 	.space  8
 #endif
-#if IMAGE_BL31 /* The power down core and cluster is needed only in BL3-1 */
+#if IMAGE_BL31 /* The power down core and cluster is needed only in BL31 */
 CPU_PWR_DWN_CORE: /* cpu_ops core_pwr_dwn */
 	.space  8
 CPU_PWR_DWN_CLUSTER: /* cpu_ops cluster_pwr_dwn */
diff --git a/include/plat/arm/common/aarch64/arm_macros.S b/include/plat/arm/common/aarch64/arm_macros.S
index eaaa62fe..384bb514 100644
--- a/include/plat/arm/common/aarch64/arm_macros.S
+++ b/include/plat/arm/common/aarch64/arm_macros.S
@@ -57,7 +57,7 @@ spacer:
 	/* ---------------------------------------------
 	 * The below utility macro prints out relevant GIC
 	 * registers whenever an unhandled exception is
-	 * taken in BL3-1 on ARM standard platforms.
+	 * taken in BL31 on ARM standard platforms.
 	 * Expects: GICD base in x16, GICC base in x17
 	 * Clobbers: x0 - x10, sp
 	 * ---------------------------------------------
@@ -125,7 +125,7 @@ cci_iface_regs:
 	/* ------------------------------------------------
 	 * The below required platform porting macro prints
 	 * out relevant interconnect registers whenever an
-	 * unhandled exception is taken in BL3-1.
+	 * unhandled exception is taken in BL31.
 	 * Clobbers: x0 - x9, sp
 	 * ------------------------------------------------
 	 */
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index 4a50c1c8..b2db6160 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -41,7 +41,7 @@
  * Definitions common to all ARM standard platforms
  *****************************************************************************/
 
-/* Special value used to verify platform parameters from BL2 to BL3-1 */
+/* Special value used to verify platform parameters from BL2 to BL31 */
 #define ARM_BL31_PLAT_PARAM_VAL		0x0f1e2d3c4b5a6978ULL
 
 #define ARM_CLUSTER_COUNT		2
@@ -257,7 +257,7 @@
  * BL2 specific defines.
  ******************************************************************************/
 /*
- * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
+ * Put BL2 just below BL31. BL2_BASE is calculated using the current BL2 debug
  * size plus a little space for growth.
  */
 #if TRUSTED_BOARD_BOOT
@@ -268,11 +268,11 @@
 #define BL2_LIMIT			BL31_BASE
 
 /*******************************************************************************
- * BL3-1 specific defines.
+ * BL31 specific defines.
  ******************************************************************************/
 /*
- * Put BL3-1 at the top of the Trusted SRAM. BL31_BASE is calculated using the
- * current BL3-1 debug size plus a little space for growth.
+ * Put BL31 at the top of the Trusted SRAM. BL31_BASE is calculated using the
+ * current BL31 debug size plus a little space for growth.
  */
 #define BL31_BASE			(ARM_BL_RAM_BASE +		\
 						ARM_BL_RAM_SIZE -	\
@@ -281,7 +281,7 @@
 #define BL31_LIMIT			(ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
 
 /*******************************************************************************
- * BL3-2 specific defines.
+ * BL32 specific defines.
  ******************************************************************************/
 /*
  * On ARM standard platforms, the TSP can execute from Trusted SRAM,
diff --git a/include/plat/arm/common/plat_arm.h b/include/plat/arm/common/plat_arm.h
index 32c062d1..3b6a04ba 100644
--- a/include/plat/arm/common/plat_arm.h
+++ b/include/plat/arm/common/plat_arm.h
@@ -87,7 +87,7 @@ void arm_configure_mmu_el3(unsigned long total_base,
 #else
 
 /*
- * Empty macros for all other BL stages other than BL3-1
+ * Empty macros for all other BL stages other than BL31
  */
 #define ARM_INSTANTIATE_LOCK
 #define arm_lock_init()
@@ -171,7 +171,7 @@ void arm_bl2u_early_platform_setup(struct meminfo *mem_layout,
 void arm_bl2u_platform_setup(void);
 void arm_bl2u_plat_arch_setup(void);
 
-/* BL3-1 utility functions */
+/* BL31 utility functions */
 void arm_bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2);
 void arm_bl31_platform_setup(void);
diff --git a/include/plat/arm/css/common/aarch64/css_macros.S b/include/plat/arm/css/common/aarch64/css_macros.S
index 9f18e09c..9124fdc7 100644
--- a/include/plat/arm/css/common/aarch64/css_macros.S
+++ b/include/plat/arm/css/common/aarch64/css_macros.S
@@ -36,7 +36,7 @@
 	/* ---------------------------------------------
 	 * The below required platform porting macro
 	 * prints out relevant GIC registers whenever an
-	 * unhandled exception is taken in BL3-1.
+	 * unhandled exception is taken in BL31.
 	 * Clobbers: x0 - x10, x16, x17, sp
 	 * ---------------------------------------------
 	 */
diff --git a/include/plat/arm/css/common/css_def.h b/include/plat/arm/css/common/css_def.h
index dcc7790e..c900278b 100644
--- a/include/plat/arm/css/common/css_def.h
+++ b/include/plat/arm/css/common/css_def.h
@@ -111,8 +111,8 @@
 
 /*
  * Load address of SCP_BL2 in CSS platform ports
- * SCP_BL2 is loaded to the same place as BL3-1.  Once SCP_BL2 is transferred to the
- * SCP, it is discarded and BL3-1 is loaded over the top.
+ * SCP_BL2 is loaded to the same place as BL31.  Once SCP_BL2 is transferred to the
+ * SCP, it is discarded and BL31 is loaded over the top.
  */
 #define SCP_BL2_BASE			BL31_BASE
 
diff --git a/include/plat/common/common_def.h b/include/plat/common/common_def.h
index 4175b145..744c22eb 100644
--- a/include/plat/common/common_def.h
+++ b/include/plat/common/common_def.h
@@ -55,7 +55,7 @@
  * avoid subtle integer overflow errors due to implicit integer type promotion
  * when working with 32-bit values.
  *
- * The TSP linker script includes some of these definitions to define the BL3-2
+ * The TSP linker script includes some of these definitions to define the BL32
  * memory map, but the GNU LD does not support the 'ull' suffix, causing the
  * build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
  * will add the 'ull' suffix only when the macro __LINKER__  is not defined
diff --git a/include/plat/common/platform.h b/include/plat/common/platform.h
index b6a037f2..c21f9ee8 100644
--- a/include/plat/common/platform.h
+++ b/include/plat/common/platform.h
@@ -134,7 +134,7 @@ struct meminfo *bl2_plat_sec_mem_layout(void);
 
 /*
  * This function returns a pointer to the shared memory that the platform has
- * kept aside to pass trusted firmware related information that BL3-1
+ * kept aside to pass trusted firmware related information that BL31
  * could need
  */
 struct bl31_params *bl2_plat_get_bl31_params(void);
@@ -147,14 +147,14 @@ struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
 
 /*
  * This function flushes to main memory all the params that are
- * passed to BL3-1
+ * passed to BL31
  */
 void bl2_plat_flush_bl31_params(void);
 
 /*
  * The next 2 functions allow the platform to change the entrypoint information
- * for the mandatory 3rd level BL images, BL3-1 and BL3-3. This is done after
- * BL2 has loaded those images into memory but before BL3-1 is executed.
+ * for the mandatory 3rd level BL images, BL31 and BL33. This is done after
+ * BL2 has loaded those images into memory but before BL31 is executed.
  */
 void bl2_plat_set_bl31_ep_info(struct image_info *image,
 			       struct entry_point_info *ep);
@@ -162,7 +162,7 @@ void bl2_plat_set_bl31_ep_info(struct image_info *image,
 void bl2_plat_set_bl33_ep_info(struct image_info *image,
 			       struct entry_point_info *ep);
 
-/* Gets the memory layout for BL3-3 */
+/* Gets the memory layout for BL33 */
 void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info);
 
 /*******************************************************************************
@@ -179,13 +179,13 @@ void bl2_plat_get_scp_bl2_meminfo(struct meminfo *mem_info);
 int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info);
 
 /*******************************************************************************
- * Conditionally mandatory BL2 functions: must be implemented if BL3-2 image
+ * Conditionally mandatory BL2 functions: must be implemented if BL32 image
  * is supported
  ******************************************************************************/
 void bl2_plat_set_bl32_ep_info(struct image_info *image,
 			       struct entry_point_info *ep);
 
-/* Gets the memory layout for BL3-2 */
+/* Gets the memory layout for BL32 */
 void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info);
 
 /*******************************************************************************
@@ -210,7 +210,7 @@ void bl2u_platform_setup(void);
 int bl2u_plat_handle_scp_bl2u(void);
 
 /*******************************************************************************
- * Mandatory BL3-1 functions
+ * Mandatory BL31 functions
  ******************************************************************************/
 void bl31_early_platform_setup(struct bl31_params *from_bl2,
 				void *plat_params_from_bl2);
@@ -220,26 +220,26 @@ void bl31_plat_runtime_setup(void);
 struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
 
 /*******************************************************************************
- * Mandatory PSCI functions (BL3-1)
+ * Mandatory PSCI functions (BL31)
  ******************************************************************************/
 int plat_setup_psci_ops(uintptr_t sec_entrypoint,
 			const struct plat_psci_ops **);
 const unsigned char *plat_get_power_domain_tree_desc(void);
 
 /*******************************************************************************
- * Optional PSCI functions (BL3-1).
+ * Optional PSCI functions (BL31).
  ******************************************************************************/
 plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
 			const plat_local_state_t *states,
 			unsigned int ncpu);
 
 /*******************************************************************************
- * Optional BL3-1 functions (may be overridden)
+ * Optional BL31 functions (may be overridden)
  ******************************************************************************/
 void bl31_plat_enable_mmu(uint32_t flags);
 
 /*******************************************************************************
- * Optional BL3-2 functions (may be overridden)
+ * Optional BL32 functions (may be overridden)
  ******************************************************************************/
 void bl32_plat_enable_mmu(uint32_t flags);
 
@@ -261,7 +261,7 @@ int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
 unsigned int platform_get_core_pos(unsigned long mpidr);
 
 /*******************************************************************************
- * Mandatory PSCI Compatibility functions (BL3-1)
+ * Mandatory PSCI Compatibility functions (BL31)
  ******************************************************************************/
 int platform_setup_pm(const plat_pm_ops_t **);