diff options
Diffstat (limited to 'include/plat/marvell/common/aarch64/arm_macros.S')
| -rw-r--r-- | include/plat/marvell/common/aarch64/arm_macros.S | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/include/plat/marvell/common/aarch64/arm_macros.S b/include/plat/marvell/common/aarch64/arm_macros.S new file mode 100644 index 00000000..cf21c155 --- /dev/null +++ b/include/plat/marvell/common/aarch64/arm_macros.S @@ -0,0 +1,189 @@ +/* + * *************************************************************************** + * Copyright (C) 2016 Marvell International Ltd. + * *************************************************************************** + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of Marvell nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + *************************************************************************** + */ +/* + * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __ARM_MACROS_S__ +#define __ARM_MACROS_S__ + +#include <cci.h> +#include <gic_common.h> +#include <gicv2.h> +#include <gicv3.h> +#include <platform_def.h> + +/* + * These Macros are required by ATF + */ + +.section .rodata.gic_reg_name, "aS" +/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */ +gicc_regs: + .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", "" + +#ifdef USE_CCI +/* Applicable only to GICv3 with SRE enabled */ +icc_regs: + .asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", "" +#endif +/* Registers common to both GICv2 and GICv3 */ +gicd_pend_reg: + .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \ + " Offset:\t\t\tvalue\n" +newline: + .asciz "\n" +spacer: + .asciz ":\t\t0x" + + /* --------------------------------------------- + * The below utility macro prints out relevant GIC + * registers whenever an unhandled exception is + * taken in BL31 on ARM standard platforms. + * Expects: GICD base in x16, GICC base in x17 + * Clobbers: x0 - x10, sp + * --------------------------------------------- + */ + .macro arm_print_gic_regs + /* Check for GICv3 system register access */ + mrs x7, id_aa64pfr0_el1 + ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH + cmp x7, #1 + b.ne print_gicv2 + + /* Check for SRE enable */ + mrs x8, ICC_SRE_EL3 + tst x8, #ICC_SRE_SRE_BIT + b.eq print_gicv2 + +#ifdef USE_CCI + /* Load the icc reg list to x6 */ + adr x6, icc_regs + /* Load the icc regs to gp regs used by str_in_crash_buf_print */ + mrs x8, ICC_HPPIR0_EL1 + mrs x9, ICC_HPPIR1_EL1 + mrs x10, ICC_CTLR_EL3 + /* Store to the crash buf and print to console */ + bl str_in_crash_buf_print +#endif + b print_gic_common + +print_gicv2: + /* Load the gicc reg list to x6 */ + adr x6, gicc_regs + /* Load the gicc regs to gp regs used by str_in_crash_buf_print */ + ldr w8, [x17, #GICC_HPPIR] + ldr w9, [x17, #GICC_AHPPIR] + ldr w10, [x17, #GICC_CTLR] + /* Store to the crash buf and print to console */ + bl str_in_crash_buf_print + +print_gic_common: + /* Print the GICD_ISPENDR regs */ + add x7, x16, #GICD_ISPENDR + adr x4, gicd_pend_reg + bl asm_print_str +gicd_ispendr_loop: + sub x4, x7, x16 + cmp x4, #0x280 + b.eq exit_print_gic_regs + bl asm_print_hex + + adr x4, spacer + bl asm_print_str + + ldr x4, [x7], #8 + bl asm_print_hex + + adr x4, newline + bl asm_print_str + b gicd_ispendr_loop +exit_print_gic_regs: + .endm + + +.section .rodata.cci_reg_name, "aS" +cci_iface_regs: + .asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , "" + + /* ------------------------------------------------ + * The below required platform porting macro prints + * out relevant interconnect registers whenever an + * unhandled exception is taken in BL31. + * Clobbers: x0 - x9, sp + * ------------------------------------------------ + */ + .macro plat_print_interconnect_regs +#ifdef USE_CCI + adr x6, cci_iface_regs + /* Store in x7 the base address of the first interface */ + mov_imm x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET( \ + PLAT_MARVELL_CCI_CLUSTER0_SL_IFACE_IX)) + ldr w8, [x7, #SNOOP_CTRL_REG] + /* Store in x7 the base address of the second interface */ + mov_imm x7, (PLAT_MARVELL_CCI_BASE + SLAVE_IFACE_OFFSET( \ + PLAT_MARVELL_CCI_CLUSTER1_SL_IFACE_IX)) + ldr w9, [x7, #SNOOP_CTRL_REG] + /* Store to the crash buf and print to console */ + bl str_in_crash_buf_print +#endif + .endm + + +#endif /* __ARM_MACROS_S__ */ |