diff options
Diffstat (limited to 'plat/marvell/common/marvell_bl1_setup.c')
| -rw-r--r-- | plat/marvell/common/marvell_bl1_setup.c | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/plat/marvell/common/marvell_bl1_setup.c b/plat/marvell/common/marvell_bl1_setup.c new file mode 100644 index 00000000..ebcecc03 --- /dev/null +++ b/plat/marvell/common/marvell_bl1_setup.c @@ -0,0 +1,160 @@ +/* + * *************************************************************************** + * Copyright (C) 2016 Marvell International Ltd. + * *************************************************************************** + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of Marvell nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + *************************************************************************** + */ + +#include <console.h> +#include <platform_def.h> +#include <plat_marvell.h> +#include <sp805.h> +#include <bl1/bl1_private.h> + +#include <debug.h> + +#if USE_COHERENT_MEM +/* + * The next 2 constants identify the extents of the coherent memory region. + * These addresses are used by the MMU setup code and therefore they must be + * page-aligned. It is the responsibility of the linker script to ensure that + * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to + * page-aligned addresses. + */ +#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) +#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) +#endif + + +/* Weak definitions may be overridden in specific Marvell standard platform */ +#pragma weak bl1_early_platform_setup +#pragma weak bl1_plat_arch_setup +#pragma weak bl1_platform_setup +#pragma weak bl1_plat_sec_mem_layout + + +/* Data structure which holds the extents of the RAM for BL1*/ +static meminfo_t bl1_ram_layout; + +meminfo_t *bl1_plat_sec_mem_layout(void) +{ + return &bl1_ram_layout; +} + +/* + * BL1 specific platform actions shared between Marvell standard platforms. + */ +void marvell_bl1_early_platform_setup(void) +{ + const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE; + +#if PALLADIUM + /* Initialize SoC MPPs in case it's needed. */ + marvell_bl1_setup_mpps(); +#endif + + /* Initialize the console to provide early debug support */ + console_init(PLAT_MARVELL_BOOT_UART_BASE, + PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, + MARVELL_CONSOLE_BAUDRATE); + + /* Allow BL1 to see the whole Trusted RAM */ + bl1_ram_layout.total_base = MARVELL_BL_RAM_BASE; + bl1_ram_layout.total_size = MARVELL_BL_RAM_SIZE; + + /* Calculate how much RAM BL1 is using and how much remains free */ + bl1_ram_layout.free_base = MARVELL_BL_RAM_BASE; + bl1_ram_layout.free_size = MARVELL_BL_RAM_SIZE; + reserve_mem(&bl1_ram_layout.free_base, + &bl1_ram_layout.free_size, + BL1_RAM_BASE, + bl1_size); +} + +void bl1_early_platform_setup(void) +{ + marvell_bl1_early_platform_setup(); +} + +/* + * Perform the very early platform specific architecture setup shared between + * MARVELL standard platforms. This only does basic initialization. Later + * architectural setup (bl1_arch_setup()) does not do anything platform + * specific. + */ +void marvell_bl1_plat_arch_setup(void) +{ + marvell_setup_page_tables(bl1_ram_layout.total_base, + bl1_ram_layout.total_size, + BL1_RO_BASE, + BL1_RO_LIMIT, + BL1_RO_DATA_BASE, + BL1_RO_DATA_LIMIT +#if USE_COHERENT_MEM + , BL1_COHERENT_RAM_BASE, + BL1_COHERENT_RAM_LIMIT +#endif + ); + enable_mmu_el3(0); +} + +void bl1_plat_arch_setup(void) +{ + marvell_bl1_plat_arch_setup(); +} + +/* + * Perform the platform specific architecture setup shared between + * MARVELL standard platforms. + */ +void marvell_bl1_platform_setup(void) +{ + /* Initialise the IO layer and register platform IO devices */ + plat_marvell_io_setup(); +} + +void bl1_platform_setup(void) +{ + marvell_bl1_platform_setup(); +} + +void bl1_plat_prepare_exit(entry_point_info_t *ep_info) +{ +#ifdef EL3_PAYLOAD_BASE + /* + * Program the EL3 payload's entry point address into the CPUs mailbox + * in order to release secondary CPUs from their holding pen and make + * them jump there. + */ + marvell_program_trusted_mailbox(ep_info->pc); + dsbsy(); + sev(); +#endif +} |