Merge tag 'i2c-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxHEAD master

Pull i2c updates from Wolfram Sang: - general cleanups in bcm2835, designware, pcf8584, and stm32 - amd-mp2: fix device refcount - designware: avoid interrupt storms caused by bad firmware - spacemit: fix device detection failures - new devices: Intel Diamond Rapids, Rockchip RK3506, Qualcomm Kaanapali and MSM8953 - minor fixes to i801, core documentation, elektor Kconfig dependencies - at24 updates: add new compatible for Belling BL24S64 * tag 'i2c-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (21 commits) i2c: qcom-cci: Add msm8953 compatible i2c: spacemit: fix detect issue i2c: amd-mp2: fix reference leak in MP2 PCI device i2c: i2c.h: fix a bad kernel-doc line i2c: i2c-elektor: Allow building on SMP kernels dt-bindings: i2c: qcom-cci: Document Kaanapali compatible dt-bindings: i2c: qcom-cci: Document msm8953 compatible dt-bindings: eeprom: at24: Add compatible for Belling BL24S64 i2c: i801: Fix the Intel Diamond Rapids features i2c: pcf8584: Change pcf_doAdress() to pcf_send_address() i2c: pcf8584: Make pcf_doAddress() function void i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0. i2c: designware: Disable SMBus interrupts to prevent storms from mis-configured firmware dt-bindings: i2c: i2c-rk3x: Add compatible string for RK3506 i2c: i801: Add support for Intel Diamond Rapids i2c: stm32: Omit two variable reassignments in stm32_i2c_dma_request() i2c: designware: Omit a variable reassignment in dw_i2c_plat_probe() i2c: pcf8584: Fix do not use assignment inside if conditional i2c: pcf8584: Remove debug macros from i2c-algo-pcf.c i2c: busses: bcm2835: convert from round_rate() to determine_rate() ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2025-12-10 07:48:05 +0900
committer: Linus Torvalds <torvalds@linux-foundation.org> 2025-12-10 07:48:05 +0900
commit: c9b47175e9131118e6f221cc8fb81397d62e7c91 (patch)
tree: ec9cf60ad95a2e8e13e73706287825ffe9ac20f6 /Documentation/devicetree/bindings/iio/multiplexer
parent: 9d588a1140b9ae211581a7a154d0b806d8cd8238 (diff)
parent: d202341d9b0c5b5965787061ba0d10daafb9d6c5 (diff)
0 files changed, 0 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
index a77719968a7e..51ddb26d93f0 100644
--- a/Documentation/devicetree/bindings/.gitignore
+++ b/Documentation/devicetree/bindings/.gitignore
@@ -2,3 +2,8 @@
 *.example.dts
 /processed-schema*.yaml
 /processed-schema*.json
+
+#
+# We don't want to ignore the following even if they are dot-files
+#
+!.yamllint
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
index 214abd3ec440..8f9dd18dfe04 100644
--- a/Documentation/devicetree/bindings/.yamllint
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -1,6 +1,11 @@
 extends: relaxed
 
 rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed:
+      - '[$^[]'
+      - '^/$'
   line-length:
     # 80 chars should be enough, but don't fail if a line is longer
     max: 110
@@ -19,13 +24,13 @@ rules:
   colons: {max-spaces-before: 0, max-spaces-after: 1}
   commas: {min-spaces-after: 1, max-spaces-after: 1}
   comments:
-    require-starting-space: false
+    require-starting-space: true
     min-spaces-from-content: 1
   comments-indentation: disable
   document-start:
     present: true
   empty-lines:
-    max: 3
+    max: 1
     max-end: 1
   empty-values:
     forbid-in-block-mappings: true
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index c9abfbe3f0aa..8d6f85f4455d 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -3,9 +3,10 @@ DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
 
-DT_SCHEMA_LINT = $(shell which yamllint)
+DT_SCHEMA_LINT = $(shell which yamllint || \
+  echo "warning: python package 'yamllint' not installed, skipping" >&2)
 
-DT_SCHEMA_MIN_VERSION = 2021.2.1
+DT_SCHEMA_MIN_VERSION = 2023.9
 
 PHONY += check_dtschema_version
 check_dtschema_version:
@@ -24,81 +25,62 @@ quiet_cmd_extract_ex = DTEX    $@
 $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 	$(call if_changed,extract_ex)
 
-# Use full schemas when checking %.example.dts
-DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json
+find_all_cmd = find $(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' \)
 
-find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \)
-
-ifeq ($(DT_SCHEMA_FILES),)
-find_cmd = $(find_all_cmd)
-else
-find_cmd = echo $(addprefix $(srctree)/, $(DT_SCHEMA_FILES))
-endif
+find_cmd = $(find_all_cmd) | \
+		sed 's|^$(srctree)/||' | \
+		grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
+		sed 's|^|$(srctree)/|'
+CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, \
+			      $(shell $(find_cmd) | xargs grep -l '^examples:'))
 
 quiet_cmd_yamllint = LINT    $(src)
       cmd_yamllint = ($(find_cmd) | \
                      xargs -n200 -P$$(nproc) \
-		     $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+		     $(DT_SCHEMA_LINT) -f parsable -c $(src)/.yamllint >&2) \
+		     && touch $@ || true
 
-quiet_cmd_chk_bindings = CHKDT   $@
+quiet_cmd_chk_bindings = CHKDT   $(src)
       cmd_chk_bindings = ($(find_cmd) | \
-                         xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
+			  xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(src)) \
+			  && touch $@ || true
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = f=$$(mktemp) ; \
-                      $(if $(DT_MK_SCHEMA_FLAGS), \
-                           printf '%s\n' $(real-prereqs), \
-                           $(find_all_cmd)) > $$f ; \
+                      $(find_all_cmd) > $$f ; \
                       $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
 		      rm -f $$f
 
-define rule_chkdt
-	$(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),)
-	$(call cmd,chk_bindings)
-	$(call cmd,mk_schema)
-endef
-
 DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider
-
-# Disable undocumented compatible checks until warning free
-override DT_CHECKER_FLAGS ?=
-
-$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
-	$(call if_changed_rule,chkdt)
-
-ifeq ($(DT_SCHEMA_FILES),)
-
-# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
-# Just copy processed-schema-examples.json
-
-$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE
-	$(call if_changed,copy)
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
 
-DT_SCHEMA_FILES = $(DT_DOCS)
-
-else
-
-# If DT_SCHEMA_FILES is specified, use it for processed-schema.json
-
-$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u
-$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
+$(obj)/processed-schema.json: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-endif
+targets += .dt-binding.checked .yamllint.checked
+$(obj)/.yamllint.checked: $(DT_DOCS) $(src)/.yamllint FORCE
+	$(if $(DT_SCHEMA_LINT),$(call if_changed,yamllint),)
 
-always-$(CHECK_DT_BINDING) += processed-schema-examples.json
-always-$(CHECK_DTBS)       += processed-schema.json
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+$(obj)/.dt-binding.checked: $(DT_DOCS) FORCE
+	$(call if_changed,chk_bindings)
+
+always-y += processed-schema.json
+targets += $(patsubst $(obj)/%,%, $(CHK_DT_EXAMPLES))
+targets += $(patsubst $(obj)/%.dtb,%.dts, $(CHK_DT_EXAMPLES))
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
 clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
-			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
+			-name '*.example.dtb' \) -delete 2>/dev/null)
+
+dt_compatible_check: $(obj)/processed-schema.json
+	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
+
+PHONY += dt_binding_check
+dt_binding_check: $(obj)/.dt-binding.checked $(obj)/.yamllint.checked $(CHK_DT_EXAMPLES)
diff --git a/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml
new file mode 100644
index 000000000000..99e2865f0e46
--- /dev/null
+++ b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Domain Access Controllers
+
+maintainers:
+  - Oleksii Moisieiev <oleksii_moisieiev@epam.com>
+
+description: |+
+  Common access controllers properties
+
+  Access controllers are in charge of stating which of the hardware blocks under
+  their responsibility (their domain) can be accesssed by which compartment. A
+  compartment can be a cluster of CPUs (or coprocessors), a range of addresses
+  or a group of hardware blocks. An access controller's domain is the set of
+  resources covered by the access controller.
+
+  This device tree binding can be used to bind devices to their access
+  controller provided by access-controllers property. In this case, the device
+  is a consumer and the access controller is the provider.
+
+  An access controller can be represented by any node in the device tree and
+  can provide one or more configuration parameters, needed to control parameters
+  of the consumer device. A consumer node can refer to the provider by phandle
+  and a set of phandle arguments, specified by '#access-controller-cells'
+  property in the access controller node.
+
+  Access controllers are typically used to set/read the permissions of a
+  hardware block and grant access to it. Any of which depends on the access
+  controller. The capabilities of each access controller are defined by the
+  binding of the access controller device.
+
+  Each node can be a consumer for the several access controllers.
+
+# always select the core schema
+select: true
+
+properties:
+  "#access-controller-cells":
+    description:
+      Number of cells in an access-controllers specifier;
+      Can be any value as specified by device tree binding documentation
+      of a particular provider. The node is an access controller.
+
+  access-controller-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of access-controllers names, sorted in the same order as
+      access-controllers entries. Consumer drivers will use
+      access-controller-names to match with existing access-controllers entries.
+
+  access-controllers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A list of access controller specifiers, as defined by the
+      bindings of the access-controllers provider.
+
+additionalProperties: true
+
+examples:
+  - |
+    clock_controller: access-controllers@50000 {
+        reg = <0x50000 0x400>;
+        #access-controller-cells = <2>;
+    };
+
+    bus_controller: bus@60000 {
+        reg = <0x60000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        #access-controller-cells = <3>;
+
+        uart4: serial@60100 {
+            reg = <0x60100 0x400>;
+            clocks = <&clk_serial>;
+            access-controllers = <&clock_controller 1 2>,
+                                 <&bus_controller 1 3 5>;
+            access-controller-names = "clock", "bus";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
deleted file mode 100644
index e4b9dcee6d41..000000000000
--- a/Documentation/devicetree/bindings/arc/archs-pct.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* ARC HS Performance Counters
-
-The ARC HS can be configured with a pipeline performance monitor for counting
-CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to up to 32 counters.
-It also supports overflow interrupts.
-
-Required properties:
-
-- compatible : should contain
-	"snps,archs-pct"
-
-Example:
-
-pmu {
-        compatible = "snps,archs-pct";
-};
diff --git a/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml
new file mode 100644
index 000000000000..532f7584f59f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/snps,archs-pct.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arc/snps,archs-pct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC HS Performance Counters
+
+maintainers:
+  - Aryabhatta Dey <aryabhattadey35@gmail.com>
+
+description:
+  The ARC HS can be configured with a pipeline performance monitor for counting
+  CPU and cache events like cache misses and hits. Like conventional PCT there
+  are 100+ hardware conditions dynamically mapped to up to 32 counters.
+  It also supports overflow interrupts.
+
+properties:
+  compatible:
+    const: snps,archs-pct
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index 02dc72c97645..e012f612f039 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/actions.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi platforms device tree bindings
+title: Actions Semi platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml b/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml
new file mode 100644
index 000000000000..67c449d804c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha,en7581-chip-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha Chip SCU Controller for EN7581 SoC
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The airoha chip-scu block provides a configuration interface for clock,
+  io-muxing and other functionalities used by multiple controllers (e.g. clock,
+  pinctrl, ecc) on EN7581 SoC.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - airoha,en7581-chip-scu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      syscon@1fa20000 {
+        compatible = "airoha,en7581-chip-scu", "syscon";
+        reg = <0x0 0x1fa20000 0x0 0x388>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..7c38c08dbf3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+      - items:
+          - enum:
+              - airoha,en7581-evb
+          - const: airoha,en7581
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index c15c92fdf2ed..db61537b7115 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/altera.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Altera's SoCFPGA platform device tree bindings
+title: Altera's SoCFPGA platform
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
@@ -13,12 +13,78 @@ properties:
   $nodename:
     const: "/"
   compatible:
-    items:
-      - enum:
-          - altr,socfpga-cyclone5
-          - altr,socfpga-arria5
-          - altr,socfpga-arria10
-      - const: altr,socfpga
+    oneOf:
+      - description: Arria 5 boards
+        items:
+          - enum:
+              - altr,socfpga-arria5-socdk
+          - const: altr,socfpga-arria5
+          - const: altr,socfpga
+
+      - description: Arria 10 boards
+        items:
+          - enum:
+              - altr,socfpga-arria10-socdk
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Mercury+ AA1 boards
+        items:
+          - enum:
+              - enclustra,mercury-aa1-pe1
+              - enclustra,mercury-aa1-pe3
+              - enclustra,mercury-aa1-st1
+              - google,chameleon-v3
+          - const: enclustra,mercury-aa1
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Cyclone 5 boards
+        items:
+          - enum:
+              - altr,socfpga-cyclone5-socdk
+              - denx,mcvevk
+              - ebv,socrates
+              - macnica,sodia
+              - novtech,chameleon96
+              - samtec,vining
+              - terasic,de0-atlas
+              - terasic,de10-nano
+              - terasic,socfpga-cyclone5-sockit
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Mercury SA1 boards
+        items:
+          - enum:
+              - enclustra,mercury-sa1-pe1
+              - enclustra,mercury-sa1-pe3
+              - enclustra,mercury-sa1-st1
+          - const: enclustra,mercury-sa1
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Mercury+ SA2 boards
+        items:
+          - enum:
+              - enclustra,mercury-sa2-pe1
+              - enclustra,mercury-sa2-pe3
+              - enclustra,mercury-sa2-st1
+          - const: enclustra,mercury-sa2
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Stratix 10 boards
+        items:
+          - enum:
+              - altr,socfpga-stratix10-socdk
+              - altr,socfpga-stratix10-swvp
+          - const: altr,socfpga-stratix10
+
+      - description: SoCFPGA VT
+        items:
+          - const: altr,socfpga-vt
+          - const: altr,socfpga
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index 572381306681..4683bd1293fa 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -9,20 +9,120 @@ title: Altera SOCFPGA Clock Manager
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
 
-description: test
+description:
+  This binding describes the Altera SOCFGPA Clock Manager and its associated
+  tree of clocks, pll's, and clock gates for the Cyclone5, Arria5 and Arria10
+  chip families.
 
 properties:
   compatible:
     items:
       - const: altr,clk-mgr
+
   reg:
     maxItems: 1
 
+  clocks:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^osc[0-9]$':
+        type: object
+
+      '^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$':
+        type: object
+        $ref: '#/$defs/clock-props'
+        unevaluatedProperties: false
+
+        properties:
+          compatible:
+            enum:
+              - altr,socfpga-pll-clock
+              - altr,socfpga-perip-clk
+              - altr,socfpga-gate-clk
+              - altr,socfpga-a10-pll-clock
+              - altr,socfpga-a10-perip-clk
+              - altr,socfpga-a10-gate-clk
+              - fixed-clock
+
+          clocks:
+            description: one or more phandles to input clock
+            minItems: 1
+            maxItems: 5
+
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+        patternProperties:
+          '^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$':
+            type: object
+            $ref: '#/$defs/clock-props'
+            unevaluatedProperties: false
+
+            properties:
+              compatible:
+                enum:
+                  - altr,socfpga-perip-clk
+                  - altr,socfpga-gate-clk
+                  - altr,socfpga-a10-perip-clk
+                  - altr,socfpga-a10-gate-clk
+
+              clocks:
+                description: one or more phandles to input clock
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - compatible
+              - clocks
+              - '#clock-cells'
+
+        required:
+          - compatible
+          - '#clock-cells'
+
 required:
   - compatible
+  - reg
 
 additionalProperties: false
 
+$defs:
+  clock-props:
+    properties:
+      reg:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 0
+
+      clk-gate:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: gating register offset
+          - description: bit index
+
+      div-reg:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: divider register offset
+          - description: bit shift
+          - description: bit width
+
+      fixed-divider:
+        $ref: /schemas/types.yaml#/definitions/uint32
+
 examples:
   - |
     clkmgr@ffd04000 {
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635765e1..000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
-  syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
-	sdr: sdr@ffc25000 {
-		compatible = "altr,sdr-ctl", "syscon";
-		reg = <0xffc25000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
deleted file mode 100644
index f5ad0ff69fae..000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
-The EDAC accesses a range of registers in the SDRAM controller.
-
-Required properties:
-- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
-- altr,sdr-syscon : phandle of the sdr module
-- interrupts : Should contain the SDRAM ECC IRQ in the
-	appropriate format for the IRQ controller.
-
-Example:
-	sdramedac {
-		compatible = "altr,sdram-edac";
-		altr,sdr-syscon = <&sdr>;
-		interrupts = <0 39 4>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
deleted file mode 100644
index 82edbaaa3f85..000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Altera SOCFPGA System Manager
-
-Required properties:
-- compatible : "altr,sys-mgr"
-- reg : Should contain 1 register ranges(address and length)
-- cpu1-start-addr : CPU1 start address in hex.
-
-Example:
-	 sysmgr@ffd08000 {
-		compatible = "altr,sys-mgr";
-		reg = <0xffd08000 0x1000>;
-		cpu1-start-addr = <0xffd080c4>;
-	};
-
-ARM64 - Stratix10
-Required properties:
-- compatible : "altr,sys-mgr-s10"
-- reg : Should contain 1 register range(address and length)
-        for system manager register.
-
-Example:
-	 sysmgr@ffd12000 {
-		compatible = "altr,sys-mgr-s10";
-		reg = <0xffd12000 0x228>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
index 0f03135d91b6..37dbb4768e5b 100644
--- a/Documentation/devicetree/bindings/arm/amazon,al.yaml
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amazon,al.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amazon's Annapurna Labs Alpine Platform Device Tree Bindings
+title: Amazon's Annapurna Labs Alpine Platform
 
 maintainers:
   - Hanna Hawa <hhhawa@amazon.com>
diff --git a/Documentation/devicetree/bindings/arm/amd,pensando.yaml b/Documentation/devicetree/bindings/arm/amd,pensando.yaml
new file mode 100644
index 000000000000..e5c2591834a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amd,pensando.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amd,pensando.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Pensando SoC Platforms
+
+maintainers:
+  - Brad Larson <blarson@amd.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+
+      - description: Boards with Pensando Elba SoC
+        items:
+          - enum:
+              - amd,pensando-elba-ortano
+          - const: amd,pensando-elba
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amd,seattle.yaml b/Documentation/devicetree/bindings/arm/amd,seattle.yaml
new file mode 100644
index 000000000000..7a3fc05b19eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amd,seattle.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amd,seattle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Seattle SoC Platforms
+
+maintainers:
+  - Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+  - Tom Lendacky <thomas.lendacky@amd.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with AMD Seattle SoC
+        items:
+          - const: amd,seattle-overdrive
+          - const: amd,seattle
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 36081734f720..08d9963fe925 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,22 +4,14 @@
 $id: http://devicetree.org/schemas/arm/amlogic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic MesonX device tree bindings
+title: Amlogic SoC based Platforms
 
 maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+  - Jerome Brunet <jbrunet@baylibre.com>
   - Kevin Hilman <khilman@baylibre.com>
 
-description: |+
-  Work in progress statement:
-
-  Device tree files and bindings applying to Amlogic SoCs and boards are
-  considered "unstable". Any Amlogic device tree binding may change at
-  any time. Be sure to use a device tree binary and a kernel image
-  generated from the same source tree.
-
-  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-  stable binding/ABI.
-
 properties:
   $nodename:
     const: '/'
@@ -35,6 +27,7 @@ properties:
         items:
           - enum:
               - minix,neo-x8
+              - tcu,fernsehfee3
           - const: amlogic,meson8
 
       - description: Boards with the Amlogic Meson8m2 SoC
@@ -81,6 +74,13 @@ properties:
           - const: amlogic,s805x
           - const: amlogic,meson-gxl
 
+      - description: Boards with the Amlogic Meson GXL S805Y SoC
+        items:
+          - enum:
+              - xiaomi,aquaman
+          - const: amlogic,s805y
+          - const: amlogic,meson-gxl
+
       - description: Boards with the Amlogic Meson GXL S905W SoC
         items:
           - enum:
@@ -99,6 +99,7 @@ properties:
               - libretech,aml-s905x-cc
               - libretech,aml-s905x-cc-v2
               - nexbox,a95x
+              - osmc,vero4k
           - const: amlogic,s905x
           - const: amlogic,meson-gxl
 
@@ -108,23 +109,34 @@ properties:
               - amlogic,p230
               - amlogic,p231
               - libretech,aml-s905d-pc
+              - osmc,vero4k-plus
               - phicomm,n1
               - smartlabs,sml5442tw
               - videostrong,gxl-kii-pro
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
 
+      - description: Boards with the Amlogic Meson GXLX S905L SoC
+        items:
+          - enum:
+              - amlogic,p271
+          - const: amlogic,s905l
+          - const: amlogic,meson-gxlx
+
       - description: Boards with the Amlogic Meson GXM S912 SoC
         items:
           - enum:
               - amlogic,q200
               - amlogic,q201
+              - azw,gt1-ultimate
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
               - minix,neo-u9h
               - nexbox,a1
+              - oranth,tx9-pro
               - tronsmart,vega-s96
+              - ugoos,am3
               - videostrong,gxm-kiii-pro
               - wetek,core2
           - const: amlogic,s912
@@ -135,6 +147,7 @@ properties:
           - enum:
               - amlogic,s400
               - jethome,jethub-j100
+              - jethome,jethub-j110
           - const: amlogic,a113d
           - const: amlogic,meson-axg
 
@@ -143,6 +156,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
@@ -150,7 +164,19 @@ properties:
       - description: Boards with the Amlogic Meson G12B A311D SoC
         items:
           - enum:
+              - bananapi,bpi-m2s
               - khadas,vim3
+              - libretech,aml-a311d-cc
+              - radxa,zero2
+          - const: amlogic,a311d
+          - const: amlogic,g12b
+
+      - description: Boards using the BPI-CM4 module with Amlogic Meson G12B A311D SoC
+        items:
+          - enum:
+              - bananapi,bpi-cm4io
+              - mntre,reform2-cm4
+          - const: bananapi,bpi-cm4
           - const: amlogic,a311d
           - const: amlogic,g12b
 
@@ -160,7 +186,12 @@ properties:
               - azw,gsking-x
               - azw,gtking
               - azw,gtking-pro
+              - bananapi,bpi-m2s
+              - dream,dreambox-one
+              - dream,dreambox-two
+              - hardkernel,odroid-go-ultra
               - hardkernel,odroid-n2
+              - hardkernel,odroid-n2l
               - hardkernel,odroid-n2-plus
               - khadas,vim3
               - ugoos,am6
@@ -170,10 +201,17 @@ properties:
       - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
         items:
           - enum:
+              - amediatech,x96-air
+              - amediatech,x96-air-gbit
+              - bananapi,bpi-m2-pro
               - bananapi,bpi-m5
+              - cyx,a95xf3-air
+              - cyx,a95xf3-air-gbit
               - hardkernel,odroid-c4
               - hardkernel,odroid-hc4
+              - haochuangyi,h96-max
               - khadas,vim3l
+              - libretech,aml-s905d3-cc
               - seirobotics,sei610
           - const: amlogic,sm1
 
@@ -181,8 +219,60 @@ properties:
         items:
           - enum:
               - amlogic,ad401
+              - amlogic,ad402
           - const: amlogic,a1
 
+      - description: Boards with the Amlogic A4 A113L2 SoC
+        items:
+          - enum:
+              - amlogic,ba400
+          - const: amlogic,a4
+
+      - description: Boards with the Amlogic A5 A113X2 SoC
+        items:
+          - enum:
+              - amlogic,av400
+          - const: amlogic,a5
+
+      - description: Boards with the Amlogic C3 C302X/C308L SoC
+        items:
+          - enum:
+              - amlogic,aw409
+              - amlogic,aw419
+          - const: amlogic,c3
+
+      - description: Boards with the Amlogic Meson S4 S805X2 SoC
+        items:
+          - enum:
+              - amlogic,aq222
+          - const: amlogic,s4
+
+      - description: Boards with the Amlogic S6 S905X5 SoC
+        items:
+          - enum:
+              - amlogic,bl209
+          - const: amlogic,s6
+
+      - description: Boards with the Amlogic S7 S805X3 SoC
+        items:
+          - enum:
+              - amlogic,bp201
+          - const: amlogic,s7
+
+      - description: Boards with the Amlogic S7D S905X5M SoC
+        items:
+          - enum:
+              - amlogic,bm202
+          - const: amlogic,s7d
+
+      - description: Boards with the Amlogic T7 A311D2 SoC
+        items:
+          - enum:
+              - amlogic,an400
+              - khadas,vim4
+          - const: amlogic,a311d2
+          - const: amlogic,t7
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 6cc74523ebfd..fa7c403c874a 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Firmware registers Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Meson SoCs have a register bank with status and data shared with the
@@ -25,10 +25,21 @@ select:
 
 properties:
   compatible:
-    items:
-      - const: amlogic,meson-gx-ao-secure
-      - const: syscon
-
+    oneOf:
+      - items:
+          - const: amlogic,meson-gx-ao-secure
+          - const: syscon
+      - items:
+          - enum:
+              - amlogic,a4-ao-secure
+              - amlogic,c3-ao-secure
+              - amlogic,s4-ao-secure
+              - amlogic,s6-ao-secure
+              - amlogic,s7-ao-secure
+              - amlogic,s7d-ao-secure
+              - amlogic,t7-ao-secure
+          - const: amlogic,meson-gx-ao-secure
+          - const: syscon
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
index eee7cda9f91b..09b27e98d4c9 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
 
diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
deleted file mode 100644
index 101dc21014ec..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Amlogic Meson8 and Meson8b "analog top" registers:
---------------------------------------------------
-
-The analog top registers contain information about the so-called
-"metal revision" (which encodes the "minor version") of the SoC.
-
-Required properties:
-- reg: the register range of the analog top registers
-- compatible: depending on the SoC this should be one of:
-		- "amlogic,meson8-analog-top"
-		- "amlogic,meson8b-analog-top"
-		along with "syscon"
-
-
-Example:
-
-	analog_top: analog-top@81a8 {
-		compatible = "amlogic,meson8-analog-top", "syscon";
-		reg = <0x81a8 0x14>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt
deleted file mode 100644
index 7656812b67b9..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/assist.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b assist registers:
------------------------------------------------
-
-The assist registers contain basic information about the SoC,
-for example the encoded SoC part number.
-
-Required properties:
-- reg: the register range of the assist registers
-- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
-
-
-Example:
-
-	assist: assist@7c00 {
-		compatible = "amlogic,meson-mx-assist", "syscon";
-		reg = <0x7c00 0x200>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
deleted file mode 100644
index 407e27f230ab..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b bootrom:
---------------------------------------
-
-The bootrom register area can be used to access SoC specific
-information, such as the "misc version".
-
-Required properties:
-- reg: the register range of the bootrom registers
-- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
-
-
-Example:
-
-	bootrom: bootrom@d9040000 {
-		compatible = "amlogic,meson-mx-bootrom", "syscon";
-		reg = <0xd9040000 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
deleted file mode 100644
index 72f8d08198b6..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Amlogic Meson8 and Meson8b power-management-unit:
--------------------------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : depending on the SoC this should be one of:
-			"amlogic,meson8-pmu"
-			"amlogic,meson8b-pmu"
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	pmu@c81000e4 {
-		compatible = "amlogic,meson8b-pmu", "syscon";
-		reg = <0xc81000e0 0x18>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/apm.yaml b/Documentation/devicetree/bindings/arm/apm.yaml
new file mode 100644
index 000000000000..ea0d362cea3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apm.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Platforms
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with X-Gene1 Soc
+        items:
+          - const: apm,mustang
+          - const: apm,xgene-storm
+
+      - description: Boards with X-Gene2 SoC
+        items:
+          - const: apm,merlin
+          - const: apm,xgene-shadowcat
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06625fd..000000000000
--- a/Documentation/devicetree/bindings/arm/apm/scu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
-		   - "apm,xgene-scu"
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
-	scu: system-clk-controller@17000000 {
-		compatible = "apm,xgene-scu","syscon";
-		reg = <0x0 0x17000000 0x0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
index 1e772c85206c..5c2629ec3d4c 100644
--- a/Documentation/devicetree/bindings/arm/apple.yaml
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/apple.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Apple ARM Machine Device Tree Bindings
+title: Apple ARM Machine
 
 maintainers:
   - Hector Martin <marcan@marcan.st>
@@ -12,12 +12,109 @@ maintainers:
 description: |
   ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
 
-  This currently includes devices based on the "M1" SoC, starting with the
-  three Mac models released in late 2020:
+  This currently includes devices based on the "A7" SoC:
+
+  - iPhone 5s
+  - iPad Air (1)
+  - iPad mini 2
+  - iPad mini 3
+
+  Devices based on the "A8" SoC:
+
+  - iPhone 6
+  - iPhone 6 Plus
+  - iPad mini 4
+  - iPod touch 6
+  - Apple TV HD
+
+  Device based on the "A8X" SoC:
+
+  - iPad Air 2
+
+  Devices based on the "A9" SoC:
+
+  - iPhone 6s
+  - iPhone 6s Plus
+  - iPhone SE (2016)
+  - iPad 5
+
+  Devices based on the "A9X" SoC:
+
+  - iPad Pro (9.7-inch)
+  - iPad Pro (12.9-inch)
+
+  Devices based on the "A10" SoC:
+
+  - iPhone 7
+  - iPhone 7 Plus
+  - iPod touch 7
+  - iPad 6
+  - iPad 7
+
+  Devices based on the "A10X" SoC:
+
+  - Apple TV 4K (1st generation)
+  - iPad Pro (2nd Generation) (10.5 Inch)
+  - iPad Pro (2nd Generation) (12.9 Inch)
+
+  Devices based on the "T2" SoC:
+
+  - Apple T2 MacBookPro15,2 (j132)
+  - Apple T2 iMacPro1,1 (j137)
+  - Apple T2 MacBookAir8,2 (j140a)
+  - Apple T2 MacBookAir8,1 (j140k)
+  - Apple T2 MacBookPro16,1 (j152f)
+  - Apple T2 MacPro7,1 (j160)
+  - Apple T2 Macmini8,1 (j174)
+  - Apple T2 iMac20,1 (j185)
+  - Apple T2 iMac20,2 (j185f)
+  - Apple T2 MacBookPro15,4 (j213)
+  - Apple T2 MacBookPro16,2 (j214k)
+  - Apple T2 MacBookPro16,4 (j215)
+  - Apple T2 MacBookPro16,3 (j223)
+  - Apple T2 MacBookAir9,1 (j230k)
+  - Apple T2 MacBookPro15,1 (j680)
+  - Apple T2 MacBookPro15,3 (j780)
+
+  Devices based on the "A11" SoC:
+
+  - iPhone 8
+  - iPhone 8 Plus
+  - iPhone X
+
+  Devices based on the "M1" SoC:
 
   - Mac mini (M1, 2020)
   - MacBook Pro (13-inch, M1, 2020)
   - MacBook Air (M1, 2020)
+  - iMac (24-inch, M1, 2021)
+
+  Devices based on the "M2" SoC:
+
+  - MacBook Air (M2, 2022)
+  - MacBook Air (15-inch, M2, 2023)
+  - MacBook Pro (13-inch, M2, 2022)
+  - Mac mini (M2, 2023)
+
+  Devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
+
+  - MacBook Pro (14-inch, M1 Pro, 2021)
+  - MacBook Pro (14-inch, M1 Max, 2021)
+  - MacBook Pro (16-inch, M1 Pro, 2021)
+  - MacBook Pro (16-inch, M1 Max, 2021)
+  - Mac Studio (M1 Max, 2022)
+  - Mac Studio (M1 Ultra, 2022)
+
+  Devices based on the "M2 Pro", "M2 Max" and "M2 Ultra" SoCs:
+
+  - MacBook Pro (14-inch, M2 Pro, 2023)
+  - MacBook Pro (14-inch, M2 Max, 2023)
+  - MacBook Pro (16-inch, M2 Pro, 2023)
+  - MacBook Pro (16-inch, M2 Max, 2023)
+  - Mac mini (M2 Pro, 2023)
+  - Mac Studio (M2 Max, 2023)
+  - Mac Studio (M2 Ultra, 2023)
+  - Mac Pro (M2 Ultra, 2023)
 
   The compatible property should follow this format:
 
@@ -50,15 +147,206 @@ properties:
     const: "/"
   compatible:
     oneOf:
+      - description: Apple A7 SoC based platforms
+        items:
+          - enum:
+              - apple,j71  # iPad Air (Wi-Fi)
+              - apple,j72  # iPad Air (Cellular)
+              - apple,j73  # iPad Air (Cellular, China)
+              - apple,j85  # iPad mini 2 (Wi-Fi)
+              - apple,j85m # iPad mini 3 (Wi-Fi)
+              - apple,j86  # iPad mini 2 (Cellular)
+              - apple,j86m # iPad mini 3 (Cellular)
+              - apple,j87  # iPad mini 2 (Cellular, China)
+              - apple,j87m # iPad mini 3 (Cellular, China)
+              - apple,n51  # iPhone 5s (GSM)
+              - apple,n53  # iPhone 5s (LTE)
+          - const: apple,s5l8960x
+          - const: apple,arm-platform
+
+      - description: Apple A8 SoC based platforms
+        items:
+          - enum:
+              - apple,j42d # Apple TV HD
+              - apple,j96  # iPad mini 4 (Wi-Fi)
+              - apple,j97  # iPad mini 4 (Cellular)
+              - apple,n56  # iPhone 6 Plus
+              - apple,n61  # iPhone 6
+              - apple,n102 # iPod touch 6
+          - const: apple,t7000
+          - const: apple,arm-platform
+
+      - description: Apple A8X SoC based platforms
+        items:
+          - enum:
+              - apple,j81 # iPad Air 2 (Wi-Fi)
+              - apple,j82 # iPad Air 2 (Cellular)
+          - const: apple,t7001
+          - const: apple,arm-platform
+
+      - description: Apple Samsung A9 SoC based platforms
+        items:
+          - enum:
+              - apple,j71s # iPad 5 (Wi-Fi) (S8000)
+              - apple,j72s # iPad 5 (Cellular) (S8000)
+              - apple,n66  # iPhone 6s Plus (S8000)
+              - apple,n69u # iPhone SE (S8000)
+              - apple,n71  # iPhone 6S (S8000)
+          - const: apple,s8000
+          - const: apple,arm-platform
+
+      - description: Apple TSMC A9 SoC based platforms
+        items:
+          - enum:
+              - apple,j71t # iPad 5 (Wi-Fi) (S8003)
+              - apple,j72t # iPad 5 (Cellular) (S8003)
+              - apple,n66m # iPhone 6s Plus (S8003)
+              - apple,n69  # iPhone SE (S8003)
+              - apple,n71m # iPhone 6S (S8003)
+          - const: apple,s8003
+          - const: apple,arm-platform
+
+      - description: Apple A9X SoC based platforms
+        items:
+          - enum:
+              - apple,j127 # iPad Pro (9.7-inch) (Wi-Fi)
+              - apple,j128 # iPad Pro (9.7-inch) (Cellular)
+              - apple,j98a # iPad Pro (12.9-inch) (Wi-Fi)
+              - apple,j99a # iPad Pro (12.9-inch) (Cellular)
+          - const: apple,s8001
+          - const: apple,arm-platform
+
+      - description: Apple A10 SoC based platforms
+        items:
+          - enum:
+              - apple,d10  # iPhone 7 (Qualcomm)
+              - apple,d11  # iPhone 7 (Intel)
+              - apple,d101 # iPhone 7 Plus (Qualcomm)
+              - apple,d111 # iPhone 7 Plus (Intel)
+              - apple,j71b # iPad 6 (Wi-Fi)
+              - apple,j72b # iPad 6 (Cellular)
+              - apple,j171 # iPad 7 (Wi-Fi)
+              - apple,j172 # iPad 7 (Cellular)
+              - apple,n112 # iPod touch 7
+          - const: apple,t8010
+          - const: apple,arm-platform
+
+      - description: Apple A10X SoC based platforms
+        items:
+          - enum:
+              - apple,j105a # Apple TV 4K (1st Generation)
+              - apple,j120  # iPad Pro 2 (12.9-inch) (Wi-Fi)
+              - apple,j121  # iPad Pro 2 (12.9-inch) (Cellular)
+              - apple,j207  # iPad Pro 2 (10.5-inch) (Wi-Fi)
+              - apple,j208  # iPad Pro 2 (10.5-inch) (Cellular)
+          - const: apple,t8011
+          - const: apple,arm-platform
+
+      - description: Apple T2 SoC based platforms
+        items:
+          - enum:
+              - apple,j132  # Apple T2 MacBookPro15,2 (j132)
+              - apple,j137  # Apple T2 iMacPro1,1 (j137)
+              - apple,j140a # Apple T2 MacBookAir8,2 (j140a)
+              - apple,j140k # Apple T2 MacBookAir8,1 (j140k)
+              - apple,j152f # Apple T2 MacBookPro16,1 (j152f)
+              - apple,j160  # Apple T2 MacPro7,1 (j160)
+              - apple,j174  # Apple T2 Macmini8,1 (j174)
+              - apple,j185  # Apple T2 iMac20,1 (j185)
+              - apple,j185f # Apple T2 iMac20,2 (j185f)
+              - apple,j213  # Apple T2 MacBookPro15,4 (j213)
+              - apple,j214k # Apple T2 MacBookPro16,2 (j214k)
+              - apple,j215  # Apple T2 MacBookPro16,4 (j215)
+              - apple,j223  # Apple T2 MacBookPro16,3 (j223)
+              - apple,j230k # Apple T2 MacBookAir9,1 (j230k)
+              - apple,j680  # Apple T2 MacBookPro15,1 (j680)
+              - apple,j780  # Apple T2 MacBookPro15,3 (j780)
+          - const: apple,t8012
+          - const: apple,arm-platform
+
+      - description: Apple A11 SoC based platforms
+        items:
+          - enum:
+              - apple,d20  # iPhone 8 (Global)
+              - apple,d21  # iPhone 8 Plus (Global)
+              - apple,d22  # iPhone X (Global)
+              - apple,d201 # iPhone 8 (GSM)
+              - apple,d211 # iPhone 8 Plus (GSM)
+              - apple,d221 # iPhone X (GSM)
+          - const: apple,t8015
+          - const: apple,arm-platform
+
       - description: Apple M1 SoC based platforms
         items:
           - enum:
               - apple,j274 # Mac mini (M1, 2020)
               - apple,j293 # MacBook Pro (13-inch, M1, 2020)
               - apple,j313 # MacBook Air (M1, 2020)
+              - apple,j456 # iMac (24-inch, 4x USB-C, M1, 2021)
+              - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
           - const: apple,t8103
           - const: apple,arm-platform
 
+      - description: Apple M2 SoC based platforms
+        items:
+          - enum:
+              - apple,j413 # MacBook Air (M2, 2022)
+              - apple,j415 # MacBook Air (15-inch, M2, 2023)
+              - apple,j473 # Mac mini (M2, 2023)
+              - apple,j493 # MacBook Pro (13-inch, M2, 2022)
+          - const: apple,t8112
+          - const: apple,arm-platform
+
+      - description: Apple M1 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j314s # MacBook Pro (14-inch, M1 Pro, 2021)
+              - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
+          - const: apple,t6000
+          - const: apple,arm-platform
+
+      - description: Apple M1 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
+              - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+              - apple,j375c # Mac Studio (M1 Max, 2022)
+          - const: apple,t6001
+          - const: apple,arm-platform
+
+      - description: Apple M1 Ultra SoC based platforms
+        items:
+          - enum:
+              - apple,j375d # Mac Studio (M1 Ultra, 2022)
+          - const: apple,t6002
+          - const: apple,arm-platform
+
+      - description: Apple M2 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j414s # MacBook Pro (14-inch, M2 Pro, 2023)
+              - apple,j416s # MacBook Pro (16-inch, M2 Pro, 2023)
+              - apple,j474s # Mac mini (M2 Pro, 2023)
+          - const: apple,t6020
+          - const: apple,arm-platform
+
+      - description: Apple M2 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j414c # MacBook Pro (14-inch, M2 Max, 2023)
+              - apple,j416c # MacBook Pro (16-inch, M2 Max, 2023)
+              - apple,j475c # Mac Studio (M2 Max, 2023)
+          - const: apple,t6021
+          - const: apple,arm-platform
+
+      - description: Apple M2 Ultra SoC based platforms
+        items:
+          - enum:
+              - apple,j180d # Mac Pro (M2 Ultra, 2023)
+              - apple,j475d # Mac Studio (M2 Ultra, 2023)
+          - const: apple,t6022
+          - const: apple,arm-platform
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
new file mode 100644
index 000000000000..b88f41a225a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple/apple,pmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Power Manager (PMGR)
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This node represents the PMGR as a syscon,
+  with sub-nodes representing individual features.
+
+properties:
+  $nodename:
+    pattern: "^power-management@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              # Do not add additional SoC to this list.
+              - apple,s5l8960x-pmgr
+              - apple,t7000-pmgr
+              - apple,s8000-pmgr
+              - apple,t8010-pmgr
+              - apple,t8015-pmgr
+              - apple,t8103-pmgr
+              - apple,t8112-pmgr
+              - apple,t6000-pmgr
+          - const: apple,pmgr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: apple,t6020-pmgr
+          - const: apple,t8103-pmgr
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "power-controller@[0-9a-f]+$":
+    description:
+      The individual power management domains within this controller
+    type: object
+    $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        power-management@23b700000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3b700000 0x0 0x14000>;
+
+            ps_sio: power-controller@1c0 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x1c0 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "sio";
+                apple,always-on;
+            };
+
+            ps_uart_p: power-controller@220 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x220 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart_p";
+                power-domains = <&ps_sio>;
+            };
+
+            ps_uart0: power-controller@270 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x270 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart0";
+                power-domains = <&ps_uart_p>;
+            };
+        };
+
+        power-management@23d280000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3d280000 0x0 0xc000>;
+
+            ps_aop_filter: power-controller@4000 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4000 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_filter";
+            };
+
+            ps_aop_base: power-controller@4010 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4010 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_base";
+                power-domains = <&ps_aop_filter>;
+            };
+
+            ps_aop_shim: power-controller@4038 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4038 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_shim";
+                power-domains = <&ps_aop_base>;
+            };
+
+            ps_aop_uart0: power-controller@4048 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4048 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_uart0";
+                power-domains = <&ps_aop_shim>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
index 4682f991a5c8..d28303d909e1 100644
--- a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,cci-400.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM CCI Cache Coherent Interconnect Device Tree Binding
+title: ARM CCI Cache Coherent Interconnect
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -119,6 +119,11 @@ examples:
           arm,hbi = <0x249>;
           interrupt-parent = <&gic>;
 
+          gic: interrupt-controller {
+              interrupt-controller;
+              #interrupt-cells = <3>;
+          };
+
           /*
            * This CCI node corresponds to a CCI component whose control
            * registers sits at address 0x000000002c090000.
@@ -166,16 +171,6 @@ examples:
               };
           };
 
-          dma0: dma@3000000 {
-              /* compatible = "arm,pl330", "arm,primecell"; */
-              cci-control-port = <&cci_control0>;
-              reg = <0x0 0x3000000 0x0 0x1000>;
-              interrupts = <10>;
-              #dma-cells = <1>;
-              #dma-channels = <8>;
-              #dma-requests = <32>;
-          };
-
           cci@2c090000 {
               compatible = "arm,cci-400";
               #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 000000000000..2bae06eed693
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Address Translation Unit (CATU) translates addresses between an
+  AXI master and system memory. The CATU is normally used along with the TMC to
+  implement scattering of virtual trace buffers in physical memory. The CATU
+  translates contiguous Virtual Addresses (VAs) from an AXI master into
+  non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-catu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-catu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  interrupts:
+    maxItems: 1
+    description: Address translation error interrupt
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI Slave connected to another Coresight component
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    catu@207e0000 {
+        compatible = "arm,coresight-catu", "arm,primecell";
+        reg = <0x207e0000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        in-ports {
+            port {
+                catu_in_port: endpoint {
+                    remote-endpoint = <&etr_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 000000000000..0a6bc03ebe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight CPU debug component are compliant with the ARMv8 architecture
+  reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+  external debug module is mainly used for two modes: self-hosted debug and
+  external debug, and it can be accessed from mmio region from Coresight and
+  eventually the debug module connects with CPU for debugging. And the debug
+  module provides sample-based profiling extension, which can be used to sample
+  CPU program counter, secure state and exception level, etc; usually every CPU
+  has one dedicated debug module to be connected.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cpu-debug
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-cpu-debug
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  cpu:
+    description:
+      A phandle to the cpu this debug component is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the debug power domain if the debug logic has its own
+      dedicated power domain. CPU idle states may also need to be separately
+      constrained to keep CPU cores powered.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - cpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    debug@f6590000 {
+        compatible = "arm,coresight-cpu-debug", "arm,primecell";
+        reg = <0xf6590000 0x1000>;
+        clocks = <&sys_ctrl 1>;
+        clock-names = "apb_pclk";
+        cpu = <&cpu0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
new file mode 100644
index 000000000000..2a91670ccb8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -0,0 +1,352 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+  The ECT components are not part of the trace generation data path and are thus
+  not part of the CoreSight graph.
+
+  The CTI component properties define the connections between the individual
+  CTI and the components it is directly connected to, consisting of input and
+  output hardware trigger signals. CTIs can have a maximum number of input and
+  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+  number is defined at design time, the maximum of each defined in the DEVID
+  register.
+
+  CTIs are interconnected in a star topology via the CTM, using a number of
+  programmable channels, usually 4, but again implementation defined and
+  described in the DEVID register. The star topology is not required to be
+  described in the bindings as the actual connections are software
+  programmable.
+
+  In general the connections between CTI and components via the trigger signals
+  are implementation defined, except when the CTI is connected to an ARM v8
+  architecture core and optional ETM.
+
+  In this case the ARM v8 architecture defines the required signal connections
+  between CTI and the CPU core and ETM if present. In the case of a v8
+  architecturally connected CTI an additional compatible string is used to
+  indicate this feature (arm,coresight-cti-v8-arch).
+
+  When CTI trigger connection information is unavailable then a minimal driver
+  binding can be declared with no explicit trigger signals. This will result
+  the driver detecting the maximum available triggers and channels from the
+  DEVID register and make them all available for use as a single default
+  connection. Any user / client application will require additional information
+  on the connections between the CTI and other components for correct operation.
+  This information might be found by enabling the Integration Test registers in
+  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+  configuration). These registers may be used to explore the trigger connections
+  between CTI and other CoreSight components.
+
+  Certain triggers between CoreSight devices and the CTI have specific types
+  and usages. These can be defined along with the signal indexes with the
+  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+  For example a CTI connected to a core will usually have a DBGREQ signal. This
+  is defined in the binding as type PE_EDBGREQ. These types will appear in an
+  optional array alongside the signal indexes. Omitting types will default all
+  signals to GEN_IO.
+
+  Note that some hardware trigger signals can be connected to non-CoreSight
+  components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-cti
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^cti(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,coresight-cti
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cti-v8-arch
+          - const: arm,coresight-cti
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  cpu:
+    description:
+      Handle to cpu this CTI is associated with.
+
+  power-domains:
+    maxItems: 1
+
+  label:
+    description:
+      Description of a coresight device.
+
+  arm,cti-ctm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the CTM this CTI is connected to, in large systems with multiple
+      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+      propagated between sockets.
+
+  arm,cs-dev-assoc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      defines a phandle reference to an associated CoreSight trace device.
+      When the associated trace device is enabled, then the respective CTI
+      will be enabled. Use in CTI base node when compatible string
+      arm,coresight-cti-v8-arch used. If the associated device has not been
+      registered then the node name will be stored as the connection name for
+      later resolution. If the associated device is not a CoreSight device or
+      not registered then the node name will remain the connection name and
+      automatic enabling will not occur.
+
+  # size cells and address cells required if trig-conns node present.
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+patternProperties:
+  '^trig-conns@([0-9]+)$':
+    type: object
+    additionalProperties: false
+
+    description:
+      A trigger connections child node which describes the trigger signals
+      between this CTI and another hardware device. This device may be a CPU,
+      CoreSight device, any other hardware device or simple external IO lines.
+      The connection may have both input and output triggers, or only one or the
+      other.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      cpu:
+        description:
+          Handle to cpu this trigger connection is associated with.
+
+      arm,cs-dev-assoc:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          defines a phandle reference to an associated CoreSight trace device.
+          When the associated trace device is enabled, then the respective CTI
+          will be enabled. If the associated device has not been registered
+          then the node name will be stored as the connection name for later
+          resolution. If the associated device is not a CoreSight device or
+          not registered then the node name will remain the connection name
+          and automatic enabling will not occur.
+
+      arm,trig-in-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger in signal numbers in use by a trig-conns node.
+
+      arm,trig-in-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger in
+          signals. Types in this array match to the corresponding signal in the
+          arm,trig-in-sigs array. If the -types array is smaller, or omitted
+          completely, then the types will default to GEN_IO.
+
+      arm,trig-out-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signal numbers in use by a trig-conns node.
+
+      arm,trig-out-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger out
+          signals. Types in this array match to the corresponding signal
+          in the arm,trig-out-sigs array. If the "-types" array is smaller,
+          or omitted completely, then the types will default to GEN_IO.
+
+      arm,trig-filters:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signals that will be blocked from becoming
+          active, unless filtering is disabled on the driver.
+
+      arm,trig-conn-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Defines a connection name that will be displayed, if the cpu or
+          arm,cs-dev-assoc properties are not being used in this connection.
+          Principle use for CTI that are connected to non-CoreSight devices, or
+          external IO.
+
+    anyOf:
+      - required:
+          - arm,trig-in-sigs
+      - required:
+          - arm,trig-out-sigs
+    oneOf:
+      - required:
+          - arm,trig-conn-name
+      - required:
+          - cpu
+      - required:
+          - arm,cs-dev-assoc
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cti-v8-arch
+
+then:
+  required:
+    - cpu
+
+unevaluatedProperties: false
+
+examples:
+  # minimum CTI definition. DEVID register used to set number of triggers.
+  - |
+    cti@20020000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20020000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+    };
+  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
+  #  driver according to the v8 architecture specification.
+  - |
+    cti@859000 {
+      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+                   "arm,primecell";
+      reg = <0x859000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      cpu = <&CPU1>;
+      arm,cs-dev-assoc = <&etm1>;
+    };
+  # Implementation defined CTI - CPU + ETM connections explicitly defined..
+  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+  # #size-cells and #address-cells are required if trig-conns@ nodes present.
+  - |
+    #include <dt-bindings/arm/coresight-cti-dt.h>
+
+    cti@858000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x858000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      arm,cti-ctm-id = <1>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+            reg = <0>;
+            arm,trig-in-sigs = <4 5 6 7>;
+            arm,trig-in-types = <ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT>;
+            arm,trig-out-sigs = <4 5 6 7>;
+            arm,trig-out-types = <ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN>;
+            arm,cs-dev-assoc = <&etm0>;
+      };
+
+      trig-conns@1 {
+            reg = <1>;
+            cpu = <&CPU0>;
+            arm,trig-in-sigs = <0 1>;
+            arm,trig-in-types = <PE_DBGTRIGGER
+                                 PE_PMUIRQ>;
+            arm,trig-out-sigs = <0 1 2 >;
+            arm,trig-out-types = <PE_EDBGREQ
+                                  PE_DBGRESTART
+                                  PE_CTIIRQ>;
+
+            arm,trig-filters = <0>;
+      };
+    };
+  # Implementation defined CTI - non CoreSight component connections.
+  - |
+    cti@20110000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20110000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+        reg = <0>;
+        arm,trig-in-sigs = <0>;
+        arm,trig-in-types = <GEN_INTREQ>;
+        arm,trig-out-sigs = <0>;
+        arm,trig-out-types = <GEN_HALTREQ>;
+        arm,trig-conn-name = "sys_profiler";
+      };
+
+      trig-conns@1 {
+        reg = <1>;
+        arm,trig-out-sigs = <2 3>;
+        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "watchdog";
+      };
+
+      trig-conns@2 {
+        reg = <2>;
+        arm,trig-in-sigs = <1 6>;
+        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "g_counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
new file mode 100644
index 000000000000..ed091dc0c10a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy sink component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy sink component is for the specific coresight sink devices
+  kernel don't have permission to access or configure, e.g., CoreSight EUD on
+  Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based
+  debug and trace capabilities. For this device, a dummy driver is needed to
+  register it as Coresight sink device in kernel side, so that path can be
+  created in the driver. Then the trace flow would be transferred to EUD via
+  coresight link of AP processor. It provides Coresight API for operations on
+  dummy source devices, such as enabling and disabling them. It also provides
+  the Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy sink is to build path in kernel
+  side for dummy sink component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@linaro.org>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-sink
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Input connection from the Coresight Trace bus to
+          dummy sink, such as Embedded USB debugger(EUD).
+
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy sink definition. Dummy sink connect to coresight replicator.
+  - |
+    sink {
+      compatible = "arm,coresight-dummy-sink";
+
+      in-ports {
+        port {
+          eud_in_replicator_swao: endpoint {
+            remote-endpoint = <&replicator_swao_out_eud>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
new file mode 100644
index 000000000000..78337be42b55
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy source component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy source component is for the specific coresight source
+  devices kernel don't have permission to access or configure. For some SOCs,
+  there would be Coresight source trace components on sub-processor which
+  are connected to AP processor via debug bus. For these devices, a dummy driver
+  is needed to register them as Coresight source devices, so that paths can be
+  created in the driver. It provides Coresight API for operations on dummy
+  source devices, such as enabling and disabling them. It also provides the
+  Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy source is to build path in kernel
+  side for dummy source component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@linaro.org>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-source
+
+  label:
+    description:
+      Description of a coresight device.
+
+  arm,static-trace-id:
+    description: If dummy source needs static id support, use this to set trace id.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 111
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the source to Coresight
+          Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy source definition. Dummy source connect to coresight funnel.
+  - |
+    source {
+      compatible = "arm,coresight-dummy-source";
+
+      out-ports {
+        port {
+          dummy_riscv_out_funnel_swao: endpoint {
+            remote-endpoint = <&funnel_swao_in_dummy_riscv>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 000000000000..b74db15e5f8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight funnel merges 2-8 trace sources into a single trace
+  stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-funnel
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-funnel
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-7])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    funnel@20040000 {
+        compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+        reg = <0x20040000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                funnel_out_port0: endpoint {
+                    remote-endpoint = <&replicator_in_port0>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                funnel_in_port0: endpoint {
+                    remote-endpoint = <&ptm0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                funnel_in_port1: endpoint {
+                    remote-endpoint = <&ptm1_out_port>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                funnel_in_port2: endpoint {
+                    remote-endpoint = <&etm0_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
new file mode 100644
index 000000000000..17ea936b796f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Programmable Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-replicator
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-replicator
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  label:
+    description:
+      Description of a coresight device.
+
+  power-domains:
+    maxItems: 1
+
+  qcom,replicator-loses-context:
+    type: boolean
+    description:
+      Indicates that the replicator will lose register context when AMBA clock
+      is removed which is observed in some replicator designs.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[01])?$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    replicator@20120000 {
+        compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+        reg = <0x20120000 0x1000>;
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&etr_in_port>;
+                };
+            };
+        };
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&csys2_funnel_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 000000000000..892df7aca1ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+  used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-etb10
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-etb10
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  label:
+    description:
+      Description of a coresight device.
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etb@20010000 {
+        compatible = "arm,coresight-etb10", "arm,primecell";
+        reg = <0x20010000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etb_in_port: endpoint {
+                    remote-endpoint = <&replicator_out_port0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 000000000000..71f2e1ed27e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+  instruction and data tracing of a processor.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-etm3x
+          - arm,coresight-etm4x
+          - arm,coresight-etm4x-sysreg
+  required:
+    - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,coresight-etm4x-sysreg
+    then:
+      $ref: /schemas/arm/primecell.yaml#
+      required:
+        - reg
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Embedded Trace Macrocell with memory mapped access.
+        items:
+          - enum:
+              - arm,coresight-etm3x
+              - arm,coresight-etm4x
+          - const: arm,primecell
+      - description:
+          Embedded Trace Macrocell (version 4.x), with system register access only
+        const: arm,coresight-etm4x-sysreg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  arm,coresight-loses-context-with-cpu:
+    type: boolean
+    description:
+      Indicates that the hardware will lose register context on CPU power down
+      (e.g. CPUIdle). An example of where this may be needed are systems which
+      contain a coresight component and CPU in the same power domain. When the
+      CPU powers down the coresight component also powers down and loses its
+      context.
+
+  label:
+    description:
+      Description of a coresight device.
+
+  arm,cp14:
+    type: boolean
+    description:
+      Must be present if the system accesses ETM/PTM management registers via
+      co-processor 14.
+
+  qcom,skip-power-up:
+    type: boolean
+    description:
+      Indicates that an implementation can skip powering up the trace unit.
+      TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+      since ETMs are in the same power domain as their CPU cores. This property
+      is required to identify such systems with hardware errata where the CPU
+      watchdog counter is stopped when TRCPDCR.PU is set.
+
+  cpu:
+    description:
+      phandle to the cpu this ETM is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection from the ETM to CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - cpu
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ptm@2201c000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201c000 0x1000>;
+
+        cpu = <&cpu0>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm0_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port0>;
+                };
+            };
+        };
+    };
+
+    ptm@2201d000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201d000 0x1000>;
+
+        cpu = <&cpu1>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm1_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
new file mode 100644
index 000000000000..9598a3d0a95b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight static funnel merges 2-8 trace sources into a single trace
+  stream.
+
+properties:
+  compatible:
+    const: arm,coresight-static-funnel
+
+  power-domains:
+    maxItems: 1
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[0-7]$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    funnel {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-funnel";
+
+        out-ports {
+            port {
+                combo_funnel_out: endpoint {
+                    remote-endpoint = <&top_funnel_in>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                combo_funnel_in0: endpoint {
+                    remote-endpoint = <&cluster0_etf_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                combo_funnel_in1: endpoint {
+                    remote-endpoint = <&cluster1_etf_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 000000000000..b81851b26c74
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+properties:
+  compatible:
+    const: arm,coresight-static-replicator
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - enum: [apb_pclk, atclk]
+      - items: # Zynq-700
+          - const: apb_pclk
+          - const: dbg_trc
+          - const: dbg_apb
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              filter-source:
+                $ref: /schemas/types.yaml#/definitions/phandle
+                description:
+                  phandle to the coresight trace source device matching the
+                  hard coded filtering for this port
+
+              remote-endpoint: true
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    replicator {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-replicator";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&etb_in_port>;
+                    filter-source = <&tpdm_video>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                    filter-source = <&tpdm_mdss>;
+                };
+            };
+        };
+
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&funnel_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 000000000000..378380c3f5aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The STM is a trace source that is integrated into a CoreSight system, designed
+  primarily for high-bandwidth trace of instrumentation embedded into software.
+  This instrumentation is made up of memory-mapped writes to the STM Advanced
+  eXtensible Interface (AXI) slave, which carry information about the behavior
+  of the software.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-stm
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-stm
+      - const: arm,primecell
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stm-base
+      - const: stm-stimulus-base
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    stm@20100000 {
+        compatible = "arm,coresight-stm", "arm,primecell";
+        reg = <0x20100000 0x1000>,
+              <0x28000000 0x180000>;
+        reg-names = "stm-base", "stm-stimulus-base";
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                stm_out_port: endpoint {
+                    remote-endpoint = <&main_funnel_in_port2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 000000000000..96dd5b5f771a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tmc
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tmc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  label:
+    description:
+      Description of a coresight device.
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  arm,buffer-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Size of contiguous buffer space for TMC ETR (embedded trace router). The
+      buffer size can be configured dynamically via buffer_size property in
+      sysfs instead.
+
+  arm,scatter-gather:
+    type: boolean
+    description:
+      Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+  arm,max-burst-size:
+    description:
+      The maximum burst size initiated by TMC on the AXI master interface. The
+      burst size can be in the range [0..15], the setting supports one data
+      transfer per burst up to a maximum of 16 data transfers per burst.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI or ATB Master output connection. Used for ETR
+          and ETF configurations.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  memory-region:
+    items:
+      - description: Reserved trace buffer memory for ETR and ETF sinks.
+          For ETR, this reserved memory region is used for trace data capture.
+          Same region is used for trace data retention as well after a panic
+          or watchdog reset.
+          This reserved memory region is used as trace buffer or used for trace
+          data retention only if specifically selected by the user in sysfs
+          interface.
+          The default memory usage models for ETR in sysfs/perf modes are
+          otherwise unaltered.
+
+          For ETF, this reserved memory region is used by default for
+          retention of trace data synced from internal SRAM after a panic
+          or watchdog reset.
+      - description: Reserved meta data memory. Used for ETR and ETF sinks
+          for storing metadata.
+
+  memory-region-names:
+    items:
+      - const: tracedata
+      - const: metadata
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etr@20070000 {
+        compatible = "arm,coresight-tmc", "arm,primecell";
+        reg = <0x20070000 0x1000>;
+        memory-region = <&etr_trace_mem_reserved>,
+                       <&etr_mdata_mem_reserved>;
+        memory-region-names = "tracedata", "metadata";
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etr_in_port: endpoint {
+                    remote-endpoint = <&replicator2_out_port0>;
+                };
+            };
+        };
+
+        out-ports {
+            port {
+                etr_out_port: endpoint {
+                    remote-endpoint = <&catu_in_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 000000000000..a207f6899e67
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+  and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tpiu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tpiu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  label:
+    description:
+      Description of a coresight device.
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpiu@e3c05000 {
+        compatible = "arm,coresight-tpiu", "arm,primecell";
+        reg = <0xe3c05000 0x1000>;
+
+        clocks = <&clk_375m>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                tpiu_in_port: endpoint {
+                    remote-endpoint = <&funnel4_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 000000000000..cff1cdaadb13
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000
+
+maintainers:
+  - Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
+  - Hugues Kamba Mpiana <hugues.kambampiana@arm.com>
+
+description: |+
+  ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+  provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+  processors.
+
+  Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+  systems for M-Class (or other) processors for adding sensors, connectivity,
+  video, audio and machine learning at the edge System and security IPs to build
+  a secure SoC for a range of rich IoT applications, for example gateways, smart
+  cameras and embedded systems.
+
+  Integrated Secure Enclave providing hardware Root of Trust and supporting
+  seamless integration of the optional CryptoCell™-312 cryptographic
+  accelerator.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+          implementation of the Corstone1000 in the MPS3 prototyping board. See
+          ARM document DAI0550.
+        items:
+          - const: arm,corstone1000-mps3
+      - description: Corstone1000 FVP is the Fixed Virtual Platform
+          implementation of this system. See ARM ecosystems FVP's.
+        items:
+          - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
new file mode 100644
index 000000000000..9c2c9ac9705a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Embedded Trace Extensions
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
+  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
+  architecture and has extended support for future architecture changes.
+  The trace generated by the ETE could be stored via legacy CoreSight
+  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
+  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
+  legacy CoreSight components, a node must be listed per instance, along
+  with any optional connection graph as per the coresight bindings.
+
+properties:
+  $nodename:
+    pattern: "^ete(-[0-9]+)?$"
+  compatible:
+    items:
+      - const: arm,embedded-trace-extension
+
+  cpu:
+    description: |
+      Handle to the cpu this ETE is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    description: |
+      Output connections from the ETE to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port:
+        description: Output connection from the ETE to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - cpu
+
+additionalProperties: false
+
+examples:
+
+# An ETE node without legacy CoreSight connections
+  - |
+    ete-0 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_0>;
+    };
+# An ETE node with legacy CoreSight connections
+  - |
+   ete-1 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_1>;
+
+      out-ports {        /* legacy coresight connection */
+         port {
+             ete1_out_port: endpoint {
+                remote-endpoint = <&funnel_in_port0>;
+             };
+         };
+      };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
index 528eee64290a..1bdbd1b7ee38 100644
--- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Integrator Boards Device Tree Bindings
+title: ARM Integrator Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -40,45 +40,6 @@ properties:
         items:
           - const: arm,integrator-sp
 
-  core-module@10000000:
-    type: object
-    description: the root node in the Integrator platforms must contain
-      a core module child node. They are always at physical address
-      0x10000000 in all the Integrator variants.
-    properties:
-      compatible:
-        items:
-          - const: arm,core-module-integrator
-          - const: syscon
-          - const: simple-mfd
-      reg:
-        maxItems: 1
-
-    required:
-      - compatible
-      - reg
-
-patternProperties:
-  "^syscon@[0-9a-f]+$":
-    description: All Integrator boards must provide a system controller as a
-      node in the root of the device tree.
-    type: object
-    properties:
-      compatible:
-        items:
-          - enum:
-              - arm,integrator-ap-syscon
-              - arm,integrator-cp-syscon
-              - arm,integrator-sp-syscon
-          - const: syscon
-      reg:
-        maxItems: 1
-
-    required:
-      - compatible
-      - reg
-
-
 required:
   - compatible
   - core-module@10000000
diff --git a/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml b/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml
new file mode 100644
index 000000000000..ce5f2e1ec1ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,juno-fpga-apb-regs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,juno-fpga-apb-regs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Juno FPGA APB Registers
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+properties:
+  compatible:
+    items:
+      - const: arm,juno-fpga-apb-regs
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^led@[0-9a-f]+,[0-9a-f]$":
+    $ref: /schemas/leds/register-bit-led.yaml#
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000 {
+        compatible = "arm,juno-fpga-apb-regs", "syscon", "simple-mfd";
+        reg = <0x010000 0x1000>;
+        ranges = <0x0 0x10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        led@8,0 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x01>;
+            label = "vexpress:0";
+            linux,default-trigger = "heartbeat";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,morello.yaml b/Documentation/devicetree/bindings/arm/arm,morello.yaml
new file mode 100644
index 000000000000..e843b97fa485
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,morello.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,morello.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Morello Platforms
+
+maintainers:
+  - Vincenzo Frascino <vincenzo.frascino@arm.com>
+
+description: |+
+  The Morello architecture is an experimental extension to Armv8.2-A,
+  which extends the AArch64 state with the principles proposed in
+  version 7 of the Capability Hardware Enhanced RISC Instructions
+  (CHERI) ISA.
+
+  ARM's Morello Platforms are built as a research project to explore
+  capability architectures based on arm.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Arm Morello System Platforms
+        items:
+          - enum:
+              - arm,morello-sdp
+              - arm,morello-fvp
+          - const: arm,morello
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
index 4f9b21f49e84..3c5f1688dbd7 100644
--- a/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -4,15 +4,15 @@
 $id: http://devicetree.org/schemas/arm/arm,realview.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM RealView Boards Device Tree Bindings
+title: ARM RealView Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |+
-  The ARM RealView series of reference designs were built to explore the ARM
-  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
-  the earlier CPUs such as TrustZone and multicore (MPCore).
+  The ARM RealView series of reference designs were built to explore the Arm11,
+  Cortex-A8, and Cortex-A9 CPUs. This included new features compared to the
+  earlier CPUs such as TrustZone and multicore (MPCore).
 
 properties:
   $nodename:
@@ -75,43 +75,6 @@ properties:
         type: object
         description: All RealView boards must provide a syscon system controller
           node inside the soc node.
-        properties:
-          compatible:
-            oneOf:
-              - items:
-                  - const: arm,realview-eb11mp-revb-syscon
-                  - const: arm,realview-eb-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-eb11mp-revc-syscon
-                  - const: arm,realview-eb-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-eb-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-pb1176-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-pb11mp-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-pba8-syscon
-                  - const: syscon
-                  - const: simple-mfd
-              - items:
-                  - const: arm,realview-pbx-syscon
-                  - const: syscon
-                  - const: simple-mfd
-
-        required:
-          - compatible
-          - reg
 
     required:
       - compatible
diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
new file mode 100644
index 000000000000..f5b54b4fc55d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Trace Buffer Extensions
+
+maintainers:
+  - Anshuman Khandual <anshuman.khandual@arm.com>
+
+description: |
+  Arm Trace Buffer Extension (TRBE) is a per CPU component
+  for storing trace generated on the CPU to memory. It is
+  accessed via CPU system registers. The software can verify
+  if it is permitted to use the component by checking the
+  TRBIDR register.
+
+properties:
+  $nodename:
+    const: trbe
+
+  compatible:
+    items:
+      - const: arm,trace-buffer-extension
+
+  interrupts:
+    description: |
+       Exactly 1 PPI must be listed. For heterogeneous systems where
+       TRBE is only supported on a subset of the CPUs, please consult
+       the arm,gic-v3 binding for details on describing a PPI partition.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    trbe {
+        compatible = "arm,trace-buffer-extension";
+        interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
new file mode 100644
index 000000000000..3b060c36b90c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Versatile system registers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    items:
+      - const: arm,versatile-sysreg
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  panel:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
index 34b437c72751..7a3caf6af200 100644
--- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Boards Device Tree Bindings
+title: ARM Versatile Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -14,6 +14,14 @@ description: |+
   with various pluggable interface boards, in essence the Versatile PB version
   is a superset of the Versatile AB version.
 
+  The root node in the Versatile platforms must contain a core module child
+  node. They are always at physical address 0x10000000 in all the Versatile
+  variants.
+
+  When fitted with the IB2 Interface Board, the Versatile AB will present an
+  optional system controller node which controls the extra peripherals on the
+  interface board.
+
 properties:
   $nodename:
     const: '/'
@@ -32,38 +40,6 @@ properties:
         items:
           - const: arm,versatile-pb
 
-  core-module@10000000:
-    type: object
-    description: the root node in the Versatile platforms must contain
-      a core module child node. They are always at physical address
-      0x10000000 in all the Versatile variants.
-    properties:
-      compatible:
-        items:
-          - const: arm,core-module-versatile
-          - const: syscon
-          - const: simple-mfd
-      reg:
-        maxItems: 1
-
-    required:
-      - compatible
-      - reg
-
-patternProperties:
-  "^syscon@[0-9a-f]+$":
-    type: object
-    description: When fitted with the IB2 Interface Board, the Versatile
-      AB will present an optional system controller node which controls the
-      extra peripherals on the interface board.
-    properties:
-      compatible:
-        contains:
-          const: arm,versatile-ib2-syscon
-    required:
-      - compatible
-      - reg
-
 required:
   - compatible
   - core-module@10000000
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index a4b4452afc1d..4cdca5320544 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express and Juno Boards Device Tree Bindings
+title: ARM Versatile Express and Juno Boards
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -103,8 +103,9 @@ properties:
           - const: arm,juno-r2
           - const: arm,juno
           - const: arm,vexpress
-      - description: Arm AEMv8a Versatile Express Real-Time System Model
-          (VE RTSM) is a programmers view of the Versatile Express with Arm
+      - description: Arm AEMv8a (Architecture Envelope Model)
+          Versatile Express Real-Time System Model (VE RTSM)
+          is a programmers view of the Versatile Express with Arm
           v8A hardware. See ARM DUI 0575D.
         items:
           - const: arm,rtsm_ve,aemv8a
@@ -122,14 +123,14 @@ properties:
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
   arm,vexpress,dcc:
     description: When describing tiles consisting of more than one DCC, its
       number can be specified with this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
@@ -139,11 +140,12 @@ patternProperties:
       the connection between the motherboard and any tiles. Sometimes the
       compatible is placed directly under this node, sometimes it is placed
       in a subnode named "motherboard-bus". Sometimes the compatible includes
-      "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+      "arm,vexpress,v2?-p1" sometimes (on software models) it is just
       "simple-bus". If the compatible is placed in the "motherboard-bus" node,
       it is stricter and always has two compatibles.
     type: object
-    $ref: '/schemas/simple-bus.yaml'
+    $ref: /schemas/simple-bus.yaml
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -179,13 +181,13 @@ patternProperties:
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
-            $ref: '/schemas/types.yaml#/definitions/string'
+            $ref: /schemas/types.yaml#/definitions/string
             enum:
               - rs1
               - rs2
 
           arm,hbi:
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: This indicates the ARM HBI (Hardware Board ID), this is
               ARM's unique board model ID, visible on the PCB's silkscreen.
 
@@ -196,7 +198,7 @@ patternProperties:
               property, describing the physical location of the children nodes.
               0 means motherboard site, while 1 and 2 are daughterboard sites, and
               0xf means "sisterboard" which is the site containing the main CPU tile.
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 15
 
diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
deleted file mode 100644
index 6efabba530f1..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
-
-ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
-with a shared L3 memory system, control logic and external interfaces to
-form a multicore cluster. The PMU enables to gather various statistics on
-the operations of the DSU. The PMU provides independent 32bit counters that
-can count any of the supported events, along with a 64bit cycle counter.
-The PMU is accessed via CPU system registers and has no MMIO component.
-
-** DSU PMU required properties:
-
-- compatible	: should be one of :
-
-		"arm,dsu-pmu"
-
-- interrupts	: Exactly 1 SPI must be listed.
-
-- cpus		: List of phandles for the CPUs connected to this DSU instance.
-
-
-** Example:
-
-dsu-pmu-0 {
-	compatible = "arm,dsu-pmu";
-	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
-	cpus = <&cpu_0>, <&cpu_1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
new file mode 100644
index 000000000000..b8c5cacb09bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2021 Joel Stanley, IBM Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Secure Boot Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The ASPEED SoCs have a register bank for interacting with the secure boot
+  controller.
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2600-sbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sbc: secure-boot-controller@1e6f2000 {
+            compatible = "aspeed,ast2600-sbc";
+            reg = <0x1e6f2000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
new file mode 100644
index 000000000000..9298c1a75dd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AST2400 based boards
+        items:
+          - enum:
+              - delta,ahe50dc-bmc
+              - facebook,galaxy100-bmc
+              - facebook,wedge100-bmc
+              - facebook,wedge40-bmc
+              - microsoft,olympus-bmc
+              - quanta,q71l-bmc
+              - tyan,palmetto-bmc
+              - yadro,vesnin-bmc
+          - const: aspeed,ast2400
+
+      - description: AST2500 based boards
+        items:
+          - enum:
+              - amd,daytonax-bmc
+              - amd,ethanolx-bmc
+              - ampere,mtjade-bmc
+              - aspeed,ast2500-evb
+              - asrock,e3c246d4i-bmc
+              - asrock,e3c256d4i-bmc
+              - asrock,romed8hm3-bmc
+              - asrock,spc621d8hm3-bmc
+              - asrock,x570d4u-bmc
+              - bytedance,g220a-bmc
+              - facebook,cmm-bmc
+              - facebook,minipack-bmc
+              - facebook,tiogapass-bmc
+              - facebook,yamp-bmc
+              - facebook,yosemitev2-bmc
+              - facebook,wedge400-bmc
+              - facebook,wedge400-data64-bmc
+              - hxt,stardragon4800-rep2-bmc
+              - ibm,mihawk-bmc
+              - ibm,mowgli-bmc
+              - ibm,romulus-bmc
+              - ibm,swift-bmc
+              - ibm,witherspoon-bmc
+              - ingrasys,zaius-bmc
+              - inspur,fp5280g2-bmc
+              - inspur,nf5280m6-bmc
+              - inspur,on5263m5-bmc
+              - intel,s2600wf-bmc
+              - inventec,lanyang-bmc
+              - lenovo,hr630-bmc
+              - lenovo,hr855xg2-bmc
+              - portwell,neptune-bmc
+              - qcom,centriq2400-rep-bmc
+              - supermicro,x11spi-bmc
+              - tyan,s7106-bmc
+              - tyan,s8036-bmc
+              - yadro,nicole-bmc
+              - yadro,vegman-n110-bmc
+              - yadro,vegman-rx20-bmc
+              - yadro,vegman-sx20-bmc
+          - const: aspeed,ast2500
+
+      - description: AST2600 based boards
+        items:
+          - enum:
+              - ampere,mtjefferson-bmc
+              - ampere,mtmitchell-bmc
+              - aspeed,ast2600-evb
+              - aspeed,ast2600-evb-a1
+              - asus,x4tf-bmc
+              - facebook,bletchley-bmc
+              - facebook,catalina-bmc
+              - facebook,clemente-bmc
+              - facebook,cloudripper-bmc
+              - facebook,darwin-bmc
+              - facebook,elbert-bmc
+              - facebook,fuji-bmc
+              - facebook,fuji-data64-bmc
+              - facebook,greatlakes-bmc
+              - facebook,harma-bmc
+              - facebook,minerva-cmc
+              - facebook,santabarbara-bmc
+              - facebook,yosemite4-bmc
+              - facebook,yosemite5-bmc
+              - ibm,balcones-bmc
+              - ibm,blueridge-bmc
+              - ibm,bonnell-bmc
+              - ibm,everest-bmc
+              - ibm,fuji-bmc
+              - ibm,rainier-bmc
+              - ibm,sbp1-bmc
+              - ibm,system1-bmc
+              - ibm,tacoma-bmc
+              - inventec,starscream-bmc
+              - inventec,transformer-bmc
+              - jabil,rbp-bmc
+              - nvidia,gb200nvl-bmc
+              - qcom,dc-scm-v1-bmc
+              - quanta,s6q-bmc
+              - ufispace,ncplite-bmc
+          - const: aspeed,ast2600
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml b/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml
new file mode 100644
index 000000000000..ad4a98a4ee67
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/atmel,sama5d2-secumod.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 Security Module (SECUMOD)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description:
+  The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+  Note that they maintain their voltage during Backup/Self-refresh.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-secumod
+          - const: syscon
+      - items:
+          - enum:
+              - microchip,sama7d65-secumod
+              - microchip,sama7g5-secumod
+          - const: atmel,sama5d2-secumod
+          - const: syscon
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    security-module@fc040000 {
+      compatible = "atmel,sama5d2-secumod", "syscon";
+      reg = <0xfc040000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index c612e1f48dba..3a34b7a2e8d4 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -4,11 +4,12 @@
 $id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 device tree bindings.
+title: Atmel AT91.
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Ludovic Desroches <ludovic.desroches@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
 
 description: |
   Boards with a SoC of the Atmel AT91 or SMART family shall have the following
@@ -22,8 +23,6 @@ properties:
           - const: atmel,at91rm9200
       - items:
           - enum:
-              - olimex,sam9-l9260
-          - enum:
               - atmel,at91sam9260
               - atmel,at91sam9261
               - atmel,at91sam9263
@@ -35,6 +34,37 @@ properties:
               - atmel,at91sam9x60
           - const: atmel,at91sam9
 
+      - description: Olimex SAM9-L9260
+        items:
+          - const: olimex,sam9-l9260
+          - const: atmel,at91sam9260
+          - const: atmel,at91sam9
+
+      - description: Calao USB A9260
+        items:
+          - const: calao,usb-a9260
+          - const: atmel,at91sam9260
+          - const: atmel,at91sam9
+
+      - description: Calao USB A9263
+        items:
+          - const: calao,usb-a9263
+          - const: atmel,at91sam9263
+          - const: atmel,at91sam9
+
+      - description: Calao USB A9G20
+        items:
+          - const: calao,usb-a9g20
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
+      - description: Calao USB A9G20-LPW
+        items:
+          - const: calao,usb-a9g20-lpw
+          - const: calao,usb-a9g20
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
       - items:
           - enum:
               - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
@@ -78,6 +108,13 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D29 Curiosity
+        items:
+          - const: microchip,sama5d29-curiosity
+          - const: atmel,sama5d29
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
       - items:
           - const: atmel,sama5d27
           - const: atmel,sama5d2
@@ -90,12 +127,20 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
-      - description: SAM9X60-EK board
+      - description: Microchip SAM9X60 Evaluation Boards
         items:
-          - const: microchip,sam9x60ek
+          - enum:
+              - microchip,sam9x60ek
+              - microchip,sam9x60-curiosity
           - const: microchip,sam9x60
           - const: atmel,at91sam9
 
+      - description: Microchip SAM9X7 Evaluation Boards
+        items:
+          - const: microchip,sam9x75-curiosity
+          - const: microchip,sam9x7
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2
@@ -126,6 +171,13 @@ properties:
           - const: atmel,sama5d3
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D3 Ethernet Development System Board
+        items:
+          - const: microchip,sama5d3-eds
+          - const: atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
       - description: CalAmp LMU5000 board
         items:
           - const: calamp,lmu5000
@@ -157,14 +209,29 @@ properties:
           - const: atmel,sama5d4
           - const: atmel,sama5
 
+      - description: Microchip SAMA7D65 Curiosity Board
+        items:
+          - const: microchip,sama7d65-curiosity
+          - const: microchip,sama7d65
+          - const: microchip,sama7d6
+          - const: microchip,sama7
+
       - items:
           - const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit
           - const: microchip,sama7g5
           - const: microchip,sama7
 
-      - description: Microchip LAN9662 PCB8291 Evaluation Board.
+      - description: Microchip SAMA7G54 Curiosity Board
         items:
-          - const: microchip,lan9662-pcb8291
+          - const: microchip,sama7g54-curiosity
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
+      - description: Microchip LAN9662 Evaluation Boards.
+        items:
+          - enum:
+              - microchip,lan9662-pcb8291
+              - microchip,lan9662-pcb8309
           - const: microchip,lan9662
           - const: microchip,lan966
 
@@ -174,6 +241,15 @@ properties:
           - const: microchip,lan9668
           - const: microchip,lan966
 
+      - description: Kontron KSwitch D10 MMT series
+        items:
+          - enum:
+              - kontron,kswitch-d10-mmt-8g
+              - kontron,kswitch-d10-mmt-6g-2gs
+          - const: kontron,s1921
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
       - items:
           - enum:
               - atmel,sams70j19
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 16eef600d599..5ce54f9befe6 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -2,6 +2,7 @@ Atmel system registers
 
 Chipid required properties:
 - compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
+			"microchip,sama7d65-chipid"
 - reg : Should contain registers location and length
 
 PIT Timer required properties:
@@ -11,7 +12,9 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 PIT64B Timer required properties:
-- compatible: Should be "microchip,sam9x60-pit64b"
+- compatible: Should be "microchip,sam9x60-pit64b" or
+			"microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"
+			"microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for PIT64B timer
 - clocks: Should contain the available clock sources for PIT64B timer.
@@ -25,28 +28,15 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
-  it also can be "microchip,sam9x60-rstc"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
-			"atmel,at91sam9260-sdramc",
-			"atmel,at91sam9g45-ddramc",
-			"atmel,sama5d3-ddramc",
-			"microchip,sam9x60-ddramc",
-			"microchip,sama7g5-uddrc"
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" or
+			"atmel,at91sam9260-sdramc" or
+			"atmel,at91sam9g45-ddramc" or
+			"atmel,sama5d3-ddramc" or
+			"microchip,sam9x60-ddramc" or
+			"microchip,sama7g5-uddrc" or
+			"microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc" or
+			"microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc".
 - reg: Should contain registers location and length
 
 Examples:
@@ -56,151 +46,3 @@ Examples:
 		reg = <0xffffe800 0x200>;
 	};
 
-RAMC PHY Controller required properties:
-- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
-- reg: Should contain registers location and length
-
-Example:
-
-	ddr3phy: ddr3phy@e3804000 {
-		compatible = "microchip,sama7g5-ddr3phy", "syscon";
-		reg = <0xe3804000 0x1000>;
-};
-
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
-  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
-  Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
-	shdwc@fffffd10 {
-		compatible = "atmel,at91sam9260-shdwc";
-		reg = <0xfffffd10 0x10>;
-		clocks = <&clk32k>;
-	};
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
-  "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
-  microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
-  by the child, forces the wake-up of the core power supply on a high level.
-  The default is to be active low.
-
-Example:
-
-On the SoC side:
-	shdwc@f8048010 {
-		compatible = "atmel,sama5d2-shdwc";
-		reg = <0xf8048010 0x10>;
-		clocks = <&clk32k>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		atmel,wakeup-rtc-timer;
-	};
-
-On the board side:
-	shdwc@f8048010 {
-		debounce-delay-us = <976>;
-
-		input@0 {
-			reg = <0>;
-		};
-
-		input@1 {
-			reg = <1>;
-			atmel,wakeup-active-high;
-		};
-	};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
-	"atmel,<chip>-sfrbu", "syscon"
-  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-  It also can be "microchip,sam9x60-sfr", "syscon".
-- reg: Should contain registers location and length
-
-	sfr@f0038000 {
-		compatible = "atmel,sama5d3-sfr", "syscon";
-		reg = <0xf0038000 0x60>;
-	};
-
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled.
-
-The Security Module also offers the PIOBU pins which can be used as GPIO pins.
-Note that they maintain their voltage during Backup/Self-refresh.
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
-  <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-- gpio-controller:	Marks the port as GPIO controller.
-- #gpio-cells:		There are 2. The pin number is the
-			first, the second represents additional
-			parameters such as GPIO_ACTIVE_HIGH/LOW.
-
-
-	secumod@fc040000 {
-		compatible = "atmel,sama5d2-secumod", "syscon";
-		reg = <0xfc040000 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/axiado.yaml b/Documentation/devicetree/bindings/arm/axiado.yaml
new file mode 100644
index 000000000000..bfabe7b32e65
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axiado.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axiado.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axiado Platforms
+
+maintainers:
+  - Harshit Shah <hshah@axiado.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AX3000 based boards
+        items:
+          - enum:
+              - axiado,ax3000-evk       # Axiado AX3000 Evaluation Board
+          - const: axiado,ax3000       # Axiado AX3000 SoC
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt
deleted file mode 100644
index ae345e1c8d2b..000000000000
--- a/Documentation/devicetree/bindings/arm/axis.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Axis Communications AB
-ARTPEC series SoC Device Tree Bindings
-
-ARTPEC-6 ARM SoC
-================
-
-Required root node properties:
-- compatible = "axis,artpec6";
-
-ARTPEC-6 System Controller
---------------------------
-
-The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
-and resets.
-
-Required properties:
-- compatible: "axis,artpec6-syscon", "syscon"
-- reg: Address and length of the register bank.
-
-Example:
-	syscon {
-		compatible = "axis,artpec6-syscon", "syscon";
-		reg = <0xf8000000 0x48>;
-	};
-
-ARTPEC-6 Development board:
----------------------------
-Required root node properties:
-- compatible = "axis,artpec6-dev-board", "axis,artpec6";
diff --git a/Documentation/devicetree/bindings/arm/axis.yaml b/Documentation/devicetree/bindings/arm/axis.yaml
new file mode 100644
index 000000000000..63e9aca85db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axis.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC platforms
+
+maintainers:
+  - Jesper Nilsson <jesper.nilsson@axis.com>
+  - Lars Persson <lars.persson@axis.com>
+  - linux-arm-kernel@axis.com
+
+description: |
+  ARM platforms using SoCs designed by Axis branded as "ARTPEC".
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Axis ARTPEC-6 SoC board
+        items:
+          - enum:
+              - axis,artpec6-dev-board
+          - const: axis,artpec6
+
+      - description: Axis ARTPEC-8 SoC board
+        items:
+          - enum:
+              - axis,artpec8-grizzly
+          - const: axis,artpec8
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml
index e0d2bb71cf50..d60907e43efc 100644
--- a/Documentation/devicetree/bindings/arm/axxia.yaml
+++ b/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/axxia.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Axxia AXM55xx device tree bindings
+title: Axxia AXM55xx
 
 maintainers:
   - Anders Berg <anders.berg@lsi.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 5dc48241efb3..2729a542c4f3 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
+title: Broadcom BCM2711/BCM2835 Platforms
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -23,6 +23,12 @@ properties:
               - raspberrypi,4-model-b
           - const: brcm,bcm2711
 
+      - description: BCM2712 based Boards
+        items:
+          - enum:
+              - raspberrypi,5-model-b
+          - const: brcm,bcm2712
+
       - description: BCM2835 based Boards
         items:
           - enum:
@@ -46,11 +52,13 @@ properties:
       - description: BCM2837 based Boards
         items:
           - enum:
+              - raspberrypi,2-model-b-rev2
               - raspberrypi,3-model-a-plus
               - raspberrypi,3-model-b
               - raspberrypi,3-model-b-plus
               - raspberrypi,3-compute-module
               - raspberrypi,3-compute-module-lite
+              - raspberrypi,model-zero-2-w
           - const: brcm,bcm2837
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
index c60324357435..f2bcac0096b7 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM11351 device tree bindings
+title: Broadcom BCM11351
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
index b3020757380f..cf4e254e32f1 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM21664 device tree bindings
+title: Broadcom BCM21664
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
index 37f3a6fcde76..eafec29ba7ab 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM23550 device tree bindings
+title: Broadcom BCM23550
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 434d3c6db61e..f47d74a5b0b6 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4708 device tree bindings
+title: Broadcom BCM4708
 
 description:
   Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
@@ -25,13 +25,16 @@ properties:
           - enum:
               - asus,rt-ac56u
               - asus,rt-ac68u
+              - buffalo,wxr-1750dhp
+              - buffalo,wzr-1166dhp
+              - buffalo,wzr-1166dhp2
               - buffalo,wzr-1750dhp
               - linksys,ea6300-v1
               - linksys,ea6500-v2
-              - luxul,xap-1510v1
+              - luxul,xap-1510-v1
               - luxul,xwc-1000
-              - netgear,r6250v1
-              - netgear,r6300v2
+              - netgear,r6250-v1
+              - netgear,r6300-v2
               - smartrg,sr400ac
               - brcm,bcm94708
           - const: brcm,bcm4708
@@ -42,8 +45,8 @@ properties:
               - asus,rt-n18u
               - buffalo,wzr-600dhp2
               - buffalo,wzr-900dhp
-              - luxul,xap-1410v1
-              - luxul,xwr-1200v1
+              - luxul,xap-1410-v1
+              - luxul,xwr-1200-v1
               - tplink,archer-c5-v2
           - const: brcm,bcm47081
           - const: brcm,bcm4708
@@ -51,6 +54,7 @@ properties:
       - description: BCM4709 based boards
         items:
           - enum:
+              - asus,rt-ac3200
               - asus,rt-ac87u
               - buffalo,wxr-1900dhp
               - linksys,ea9200
@@ -64,13 +68,17 @@ properties:
       - description: BCM47094 based boards
         items:
           - enum:
+              - asus,rt-ac3100
+              - asus,rt-ac5300
+              - asus,rt-ac88u
               - dlink,dir-885l
+              - dlink,dir-890l
               - linksys,panamera
               - luxul,abr-4500-v1
               - luxul,xap-1610-v1
               - luxul,xbr-4500-v1
               - luxul,xwc-2000-v1
-              - luxul,xwr-3100v1
+              - luxul,xwr-3100-v1
               - luxul,xwr-3150-v1
               - netgear,r8500
               - phicomm,k3
@@ -83,9 +91,22 @@ properties:
               - brcm,bcm953012er
               - brcm,bcm953012hr
               - brcm,bcm953012k
+          - const: brcm,bcm53012
+          - const: brcm,bcm4708
+
+      - description: BCM53015 based boards
+        items:
+          - enum:
+              - meraki,mr26
+          - const: brcm,bcm53015
+          - const: brcm,bcm4708
+
+      - description: BCM53016 based boards
+        items:
+          - enum:
+              - dlink,dwl-8610ap
               - meraki,mr32
-          - const: brcm,brcm53012
-          - const: brcm,brcm53016
+          - const: brcm,bcm53016
           - const: brcm,bcm4708
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
deleted file mode 100644
index 2cd4e4a32278..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM4908 device tree bindings
-
-description:
-  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-
-maintainers:
-  - Rafał Miłecki <rafal@milecki.pl>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: BCM4906 based boards
-        items:
-          - enum:
-              - netgear,r8000p
-              - tplink,archer-c2300-v1
-          - const: brcm,bcm4906
-          - const: brcm,bcm4908
-
-      - description: BCM4908 based boards
-        items:
-          - enum:
-              - asus,gt-ac5300
-          - const: brcm,bcm4908
-
-      - description: BCM49408 based boards
-        items:
-          - const: brcm,bcm49408
-          - const: brcm,bcm4908
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml
new file mode 100644
index 000000000000..81b9a4a641c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm53573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53573 SoCs family
+
+description:
+  Broadcom BCM53573 / BCM47189 Wi-Fi SoCs derived from Northstar.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM53573 based boards
+        items:
+          - enum:
+              - tenda,ac6-v1
+              - tenda,w15e-v1
+          - const: brcm,bcm53573
+
+      - description: BCM47189 based boards
+        items:
+          - enum:
+              - brcm,bcm947189acdbmr
+              - luxul,xap-810-v1
+              - luxul,xap-1440-v1
+              - tenda,ac9
+          - const: brcm,bcm47189
+          - const: brcm,bcm53573
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
index 8c7a4908a849..a8866c6e9d46 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -30,7 +30,7 @@ Example:
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,cotex-a9";
+			compatible = "arm,cortex-a9";
 			reg = <0>;
 			...
 			enable-method = "brcm,bcm63138";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 000000000000..354bb1420cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC
+
+description:
+  Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+  chips that can be used as home gateway, router and WLAN AP for residential,
+  enterprise and carrier applications.
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Anand Gore <anand.gore@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM47622 based boards
+        items:
+          - enum:
+              - brcm,bcm947622
+          - const: brcm,bcm47622
+          - const: brcm,bcmbca
+
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+              - zyxel,ex3510b
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - brcm,bcm94908
+              - netgear,raxe500
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4912 based boards
+        items:
+          - enum:
+              - asus,gt-ax6000
+              - brcm,bcm94912
+          - const: brcm,bcm4912
+          - const: brcm,bcmbca
+
+      - description: BCM63138 based boards
+        items:
+          - enum:
+              - brcm,bcm963138
+              - brcm,BCM963138DVT
+          - const: brcm,bcm63138
+          - const: brcm,bcmbca
+
+      - description: BCM63146 based boards
+        items:
+          - enum:
+              - brcm,bcm963146
+          - const: brcm,bcm63146
+          - const: brcm,bcmbca
+
+      - description: BCM63148 based boards
+        items:
+          - enum:
+              - brcm,bcm963148
+          - const: brcm,bcm63148
+          - const: brcm,bcmbca
+
+      - description: BCM63158 based boards
+        items:
+          - enum:
+              - brcm,bcm963158
+          - const: brcm,bcm63158
+          - const: brcm,bcmbca
+
+      - description: BCM63178 based boards
+        items:
+          - enum:
+              - brcm,bcm963178
+          - const: brcm,bcm63178
+          - const: brcm,bcmbca
+
+      - description: BCM6756 based boards
+        items:
+          - enum:
+              - brcm,bcm96756
+          - const: brcm,bcm6756
+          - const: brcm,bcmbca
+
+      - description: BCM6813 based boards
+        items:
+          - enum:
+              - brcm,bcm96813
+          - const: brcm,bcm6813
+          - const: brcm,bcmbca
+
+      - description: BCM6846 based boards
+        items:
+          - enum:
+              - brcm,bcm96846
+              - genexis,xg6846b
+          - const: brcm,bcm6846
+          - const: brcm,bcmbca
+
+      - description: BCM6855 based boards
+        items:
+          - enum:
+              - brcm,bcm96855
+          - const: brcm,bcm6855
+          - const: brcm,bcmbca
+
+      - description: BCM6856 based boards
+        items:
+          - enum:
+              - brcm,bcm96856
+          - const: brcm,bcm6856
+          - const: brcm,bcmbca
+
+      - description: BCM6858 based boards
+        items:
+          - enum:
+              - brcm,bcm96858
+          - const: brcm,bcm6858
+          - const: brcm,bcmbca
+
+      - description: BCM6878 based boards
+        items:
+          - enum:
+              - brcm,bcm96878
+          - const: brcm,bcm6878
+          - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 104cc9b41df4..071421dbc4d0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -187,15 +187,8 @@ Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
index 432ccf990f9e..a0a3f32db54e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Cygnus device tree bindings
+title: Broadcom Cygnus
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
index 294948399f82..cc6add0e933a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Hurricane 2 device tree bindings
+title: Broadcom Hurricane 2
 
 description:
   Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
index c4847abbecd8..6696598eca0e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom North Star 2 (NS2) device tree bindings
+title: Broadcom North Star 2 (NS2)
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 7d184ba7d180..a43b2d4d936b 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Northstar Plus device tree bindings
+title: Broadcom Northstar Plus
 
 description:
   Broadcom Northstar Plus family of SoCs are used for switching control
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
index c638e04ebae0..c6ccb78aab0a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Stingray device tree bindings
+title: Broadcom Stingray
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
index 4eba182abd53..3f441352fbf0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Vulcan device tree bindings
+title: Broadcom Vulcan
 
 maintainers:
   - Robert Richter <rrichter@marvell.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index b369b374fc4a..8349c0a854d9 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -30,6 +30,7 @@ properties:
 
   clocks:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -45,8 +46,33 @@ properties:
       - compatible
       - "#clock-cells"
 
+  gpio:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-gpio
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description:
+          The first cell is the pin number, and the second cell is used to
+          specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW).
+
+      gpio-line-names:
+        minItems: 8
+
+    required:
+      - compatible
+      - gpio-controller
+      - "#gpio-cells"
+
   reset:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -63,6 +89,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -76,8 +103,28 @@ properties:
       - compatible
       - "#pwm-cells"
 
+  touchscreen:
+    type: object
+    $ref: /schemas/input/touchscreen/touchscreen.yaml#
     additionalProperties: false
 
+    properties:
+      compatible:
+        const: raspberrypi,firmware-ts
+
+      firmware:
+        deprecated: true
+        description: Phandle to RPi's firmware device node.
+
+      touchscreen-size-x: true
+      touchscreen-size-y: true
+      touchscreen-inverted-x: true
+      touchscreen-inverted-y: true
+      touchscreen-swapped-x-y: true
+
+    required:
+      - compatible
+
 required:
   - compatible
   - mboxes
@@ -95,6 +142,12 @@ examples:
             #clock-cells = <1>;
         };
 
+        expgpio: gpio {
+            compatible = "raspberrypi,firmware-gpio";
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
         reset: reset {
             compatible = "raspberrypi,firmware-reset";
             #reset-cells = <1>;
@@ -104,5 +157,11 @@ examples:
             compatible = "raspberrypi,firmware-poe-pwm";
             #pwm-cells = <2>;
         };
+
+        ts: touchscreen {
+            compatible = "raspberrypi,firmware-ts";
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 90ba02be48ce..55a5a570b5bc 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bitmain.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bitmain platform device tree bindings
+title: Bitmain platform
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/blaize.yaml b/Documentation/devicetree/bindings/arm/blaize.yaml
new file mode 100644
index 000000000000..af39e2756407
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/blaize.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/blaize.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Blaize Platforms
+
+maintainers:
+  - James Cowgill <james.cowgill@blaize.com>
+  - Matt Redfearn <matt.redfearn@blaize.com>
+  - Neil Jones <neil.jones@blaize.com>
+  - Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+
+description: |
+  Blaize Platforms using SoCs designed by Blaize Inc.
+
+  The products based on the BLZP1600 SoC:
+
+  - BLZP1600-SoM: SoM (System on Module)
+  - BLZP1600-CB2: Development board CB2 based on BLZP1600-SoM
+
+  BLZP1600 SoC integrates a dual core ARM Cortex A53 cluster
+  and a Blaize Graph Streaming Processor for AI and ML workloads,
+  plus a suite of connectivity and other peripherals.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Blaize BLZP1600 based boards
+        items:
+          - enum:
+              - blaize,blzp1600-cb2
+          - const: blaize,blzp1600
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bst.yaml b/Documentation/devicetree/bindings/arm/bst.yaml
new file mode 100644
index 000000000000..a3a7f424fd57
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bst.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BST platforms
+
+description:
+  Black Sesame Technologies (BST) is a semiconductor company that produces
+  automotive-grade system-on-chips (SoCs) for intelligent driving, focusing
+  on computer vision and AI capabilities. The BST C1200 family includes SoCs
+  for ADAS (Advanced Driver Assistance Systems) and autonomous driving
+  applications.
+
+maintainers:
+  - Ge Gordon <gordon.ge@bst.ai>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BST C1200 CDCU1.0 ADAS 4C2G board
+        items:
+          - const: bst,c1200-cdcu1.0-adas-4c2g
+          - const: bst,c1200
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
index 46f78addebb0..3e9f5e1d862e 100644
--- a/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ b/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda Platforms Device Tree Bindings
+title: Calxeda Platforms
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
index a9fe01238a88..76b65ea149b6 100644
--- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
+++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
@@ -16,7 +16,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "calxeda,hb-sregs-l2-ecc"
+    const: calxeda,hb-sregs-l2-ecc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml b/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml
new file mode 100644
index 000000000000..d7c813118c1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cavium,thunder-88xx.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cavium,thunder-88xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Thunder 88xx SoC
+
+maintainers:
+  - Robert Richter <rric@kernel.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - const: cavium,thunder-88xx
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder.txt b/Documentation/devicetree/bindings/arm/cavium-thunder.txt
deleted file mode 100644
index 6f63a5866902..000000000000
--- a/Documentation/devicetree/bindings/arm/cavium-thunder.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Cavium Thunder platform device tree bindings
---------------------------------------------
-
-Boards with Cavium's Thunder SoC shall have following properties.
-
-Root Node
----------
-Required root node properties:
-
-  - compatible = "cavium,thunder-88xx";
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
deleted file mode 100644
index dc5dd65cbce7..000000000000
--- a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Cavium ThunderX2 CN99XX platform tree bindings
-----------------------------------------------
-
-Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
-  compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
-
-These SoC uses the "cavium,thunder2" core which will be compatible
-with "brcm,vulcan".
diff --git a/Documentation/devicetree/bindings/arm/cci-control-port.yaml b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
index c9114866213f..c29d250a6d77 100644
--- a/Documentation/devicetree/bindings/arm/cci-control-port.yaml
+++ b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/cci-control-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CCI Interconnect Bus Masters binding
+title: CCI Interconnect Bus Masters
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
diff --git a/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
new file mode 100644
index 000000000000..170aad5dd7ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cirrus/cirrus,ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx platforms
+
+description:
+  The EP93xx SoC is a ARMv4T-based with 200 MHz ARM9 CPU.
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The TS-7250 is a compact, full-featured Single Board
+          Computer (SBC) based upon the Cirrus EP9302 ARM9 CPU
+        items:
+          - const: technologic,ts7250
+          - const: cirrus,ep9301
+
+      - description: The Liebherr BK3 is a derivate from ts7250 board
+        items:
+          - const: liebherr,bk3
+          - const: cirrus,ep9301
+
+      - description: EDB302 is an evaluation board by Cirrus Logic,
+          based on a Cirrus Logic EP9302 CPU
+        items:
+          - const: cirrus,edb9302
+          - const: cirrus,ep9301
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/cix.yaml b/Documentation/devicetree/bindings/arm/cix.yaml
new file mode 100644
index 000000000000..114dab4bc4d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cix.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+  - Peter Chen <peter.chen@cixtech.com>
+  - Fugang Duan <fugang.duan@cixtech.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Radxa Orion O6
+        items:
+          - const: radxa,orion-o6
+          - const: cix,sky1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
-               "arm,primecell" since this driver is using the AMBA bus
-	       interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
-                using the AMBA framework, the name of the clock providing
-		the interconnect should be "apb_pclk" and the clock is
-		mandatory. The interface between the debug logic and the
-		processor core is clocked by the internal CPU clock, so it
-		is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
-        to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
-                 binding to turn on the debug logic if it has own dedicated
-		 power domain and if necessary to use "cpuidle.off=1" or
-		 "nohlt" in the kernel command line or sysfs node to
-		 constrain idle states to ensure registers in the CPU power
-		 domain are accessible.
-
-Example:
-
-	debug@f6590000 {
-		compatible = "arm,coresight-cpu-debug","arm,primecell";
-		reg = <0 0xf6590000 0 0x1000>;
-		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu0>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
deleted file mode 100644
index 21e3515491f4..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ /dev/null
@@ -1,332 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2019 Linaro Ltd.
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/coresight-cti.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM Coresight Cross Trigger Interface (CTI) device.
-
-description: |
-  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
-  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
-  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
-  The ECT components are not part of the trace generation data path and are thus
-  not part of the CoreSight graph described in the general CoreSight bindings
-  file coresight.txt.
-
-  The CTI component properties define the connections between the individual
-  CTI and the components it is directly connected to, consisting of input and
-  output hardware trigger signals. CTIs can have a maximum number of input and
-  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
-  number is defined at design time, the maximum of each defined in the DEVID
-  register.
-
-  CTIs are interconnected in a star topology via the CTM, using a number of
-  programmable channels, usually 4, but again implementation defined and
-  described in the DEVID register. The star topology is not required to be
-  described in the bindings as the actual connections are software
-  programmable.
-
-  In general the connections between CTI and components via the trigger signals
-  are implementation defined, except when the CTI is connected to an ARM v8
-  architecture core and optional ETM.
-
-  In this case the ARM v8 architecture defines the required signal connections
-  between CTI and the CPU core and ETM if present. In the case of a v8
-  architecturally connected CTI an additional compatible string is used to
-  indicate this feature (arm,coresight-cti-v8-arch).
-
-  When CTI trigger connection information is unavailable then a minimal driver
-  binding can be declared with no explicit trigger signals. This will result
-  the driver detecting the maximum available triggers and channels from the
-  DEVID register and make them all available for use as a single default
-  connection. Any user / client application will require additional information
-  on the connections between the CTI and other components for correct operation.
-  This information might be found by enabling the Integration Test registers in
-  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
-  configuration). These registers may be used to explore the trigger connections
-  between CTI and other CoreSight components.
-
-  Certain triggers between CoreSight devices and the CTI have specific types
-  and usages. These can be defined along with the signal indexes with the
-  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
-
-  For example a CTI connected to a core will usually have a DBGREQ signal. This
-  is defined in the binding as type PE_EDBGREQ. These types will appear in an
-  optional array alongside the signal indexes. Omitting types will default all
-  signals to GEN_IO.
-
-  Note that some hardware trigger signals can be connected to non-CoreSight
-  components (e.g. UART etc) depending on hardware implementation.
-
-maintainers:
-  - Mike Leach <mike.leach@linaro.org>
-
-allOf:
-  - $ref: /schemas/arm/primecell.yaml#
-
-# Need a custom select here or 'arm,primecell' will match on lots of nodes
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - arm,coresight-cti
-  required:
-    - compatible
-
-properties:
-  $nodename:
-    pattern: "^cti(@[0-9a-f]+)$"
-  compatible:
-    oneOf:
-      - items:
-          - const: arm,coresight-cti
-          - const: arm,primecell
-      - items:
-          - const: arm,coresight-cti-v8-arch
-          - const: arm,coresight-cti
-          - const: arm,primecell
-
-  reg:
-    maxItems: 1
-
-  cpu:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      Handle to cpu this device is associated with. This must appear in the
-      base cti node if compatible string arm,coresight-cti-v8-arch is used,
-      or may appear in a trig-conns child node when appropriate.
-
-  arm,cti-ctm-id:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Defines the CTM this CTI is connected to, in large systems with multiple
-      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
-      propagated between sockets.
-
-  arm,cs-dev-assoc:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      defines a phandle reference to an associated CoreSight trace device.
-      When the associated trace device is enabled, then the respective CTI
-      will be enabled. Use in a trig-conns node, or in CTI base node when
-      compatible string arm,coresight-cti-v8-arch used. If the associated
-      device has not been registered then the node name will be stored as
-      the connection name for later resolution. If the associated device is
-      not a CoreSight device or not registered then the node name will remain
-      the connection name and automatic enabling will not occur.
-
-  # size cells and address cells required if trig-conns node present.
-  "#size-cells":
-    const: 0
-
-  "#address-cells":
-    const: 1
-
-patternProperties:
-  '^trig-conns@([0-9]+)$':
-    type: object
-    description:
-      A trigger connections child node which describes the trigger signals
-      between this CTI and another hardware device. This device may be a CPU,
-      CoreSight device, any other hardware device or simple external IO lines.
-      The connection may have both input and output triggers, or only one or the
-      other.
-
-    properties:
-      reg:
-        maxItems: 1
-
-      arm,trig-in-sigs:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger in signal numbers in use by a trig-conns node.
-
-      arm,trig-in-types:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of constants representing the types for the CTI trigger in
-          signals. Types in this array match to the corresponding signal in the
-          arm,trig-in-sigs array. If the -types array is smaller, or omitted
-          completely, then the types will default to GEN_IO.
-
-      arm,trig-out-sigs:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger out signal numbers in use by a trig-conns node.
-
-      arm,trig-out-types:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of constants representing the types for the CTI trigger out
-          signals. Types in this array match to the corresponding signal
-          in the arm,trig-out-sigs array. If the "-types" array is smaller,
-          or omitted completely, then the types will default to GEN_IO.
-
-      arm,trig-filters:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger out signals that will be blocked from becoming
-          active, unless filtering is disabled on the driver.
-
-      arm,trig-conn-name:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          Defines a connection name that will be displayed, if the cpu or
-          arm,cs-dev-assoc properties are not being used in this connection.
-          Principle use for CTI that are connected to non-CoreSight devices, or
-          external IO.
-
-    anyOf:
-      - required:
-          - arm,trig-in-sigs
-      - required:
-          - arm,trig-out-sigs
-    oneOf:
-      - required:
-          - arm,trig-conn-name
-      - required:
-          - cpu
-      - required:
-          - arm,cs-dev-assoc
-    required:
-      - reg
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: arm,coresight-cti-v8-arch
-
-then:
-  required:
-    - cpu
-
-unevaluatedProperties: false
-
-examples:
-  # minimum CTI definition. DEVID register used to set number of triggers.
-  - |
-    cti@20020000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x20020000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-    };
-  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
-  #  driver according to the v8 architecture specification.
-  - |
-    cti@859000 {
-      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-                   "arm,primecell";
-      reg = <0x859000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      cpu = <&CPU1>;
-      arm,cs-dev-assoc = <&etm1>;
-    };
-  # Implementation defined CTI - CPU + ETM connections explicitly defined..
-  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
-  # #size-cells and #address-cells are required if trig-conns@ nodes present.
-  - |
-    #include <dt-bindings/arm/coresight-cti-dt.h>
-
-    cti@858000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x858000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      arm,cti-ctm-id = <1>;
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      trig-conns@0 {
-            reg = <0>;
-            arm,trig-in-sigs = <4 5 6 7>;
-            arm,trig-in-types = <ETM_EXTOUT
-                                 ETM_EXTOUT
-                                 ETM_EXTOUT
-                                 ETM_EXTOUT>;
-            arm,trig-out-sigs = <4 5 6 7>;
-            arm,trig-out-types = <ETM_EXTIN
-                                  ETM_EXTIN
-                                  ETM_EXTIN
-                                  ETM_EXTIN>;
-            arm,cs-dev-assoc = <&etm0>;
-      };
-
-      trig-conns@1 {
-            reg = <1>;
-            cpu = <&CPU0>;
-            arm,trig-in-sigs = <0 1>;
-            arm,trig-in-types = <PE_DBGTRIGGER
-                                 PE_PMUIRQ>;
-            arm,trig-out-sigs=<0 1 2 >;
-            arm,trig-out-types = <PE_EDBGREQ
-                                  PE_DBGRESTART
-                                  PE_CTIIRQ>;
-
-            arm,trig-filters = <0>;
-      };
-    };
-  # Implementation defined CTI - non CoreSight component connections.
-  - |
-    cti@20110000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x20110000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      trig-conns@0 {
-        reg = <0>;
-        arm,trig-in-sigs=<0>;
-        arm,trig-in-types=<GEN_INTREQ>;
-        arm,trig-out-sigs=<0>;
-        arm,trig-out-types=<GEN_HALTREQ>;
-        arm,trig-conn-name = "sys_profiler";
-      };
-
-      trig-conns@1 {
-        reg = <1>;
-        arm,trig-out-sigs=<2 3>;
-        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
-        arm,trig-conn-name = "watchdog";
-      };
-
-      trig-conns@2 {
-        reg = <2>;
-        arm,trig-in-sigs=<1 6>;
-        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
-        arm,trig-conn-name = "g_counter";
-      };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
deleted file mode 100644
index c68d93a35b6c..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ /dev/null
@@ -1,402 +0,0 @@
-* CoreSight Components:
-
-CoreSight components are compliant with the ARM CoreSight architecture
-specification and can be connected in various topologies to suit a particular
-SoCs tracing needs. These trace components can generally be classified as
-sinks, links and sources. Trace data produced by one or more sources flows
-through the intermediate links connecting the source to the currently selected
-sink. Each CoreSight component device should use these properties to describe
-its hardware characteristcs.
-
-* Required properties for all components *except* non-configurable replicators
-  and non-configurable funnels:
-
-	* compatible: These have to be supplemented with "arm,primecell" as
-	  drivers are using the AMBA bus interface.  Possible values include:
-		- Embedded Trace Buffer (version 1.0):
-			"arm,coresight-etb10", "arm,primecell";
-
-		- Trace Port Interface Unit:
-			"arm,coresight-tpiu", "arm,primecell";
-
-		- Trace Memory Controller, used for Embedded Trace Buffer(ETB),
-		  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
-		  configuration.  The configuration mode (ETB, ETF, ETR) is
-		  discovered at boot time when the device is probed.
-			"arm,coresight-tmc", "arm,primecell";
-
-		- Trace Programmable Funnel:
-			"arm,coresight-dynamic-funnel", "arm,primecell";
-			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
-				backward compatibility and will be removed)
-
-		- Embedded Trace Macrocell (version 3.x) and
-					Program Flow Trace Macrocell:
-			"arm,coresight-etm3x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with memory mapped access.
-			"arm,coresight-etm4x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with system register access only.
-			"arm,coresight-etm4x-sysreg";
-
-		- Coresight programmable Replicator :
-			"arm,coresight-dynamic-replicator", "arm,primecell";
-
-		- System Trace Macrocell:
-			"arm,coresight-stm", "arm,primecell"; [1]
-		- Coresight Address Translation Unit (CATU)
-			"arm,coresight-catu", "arm,primecell";
-
-		- Coresight Cross Trigger Interface (CTI):
-			"arm,coresight-cti", "arm,primecell";
-			See coresight-cti.yaml for full CTI definitions.
-
-	* reg: physical base address and length of the register
-	  set(s) of the component.
-
-	* clocks: the clocks associated to this component.
-
-	* clock-names: the name of the clocks referenced by the code.
-	  Since we are using the AMBA framework, the name of the clock
-	  providing the interconnect should be "apb_pclk", and some
-	  coresight blocks also have an additional clock "atclk", which
-	  clocks the core of that coresight component. The latter clock
-	  is optional.
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Additional required property for Embedded Trace Macrocell (version 3.x and
-  version 4.x):
-	* cpu: the cpu phandle this ETM/PTM is affined to. Do not
-	  assume it to default to CPU0 if omitted.
-
-* Additional required properties for System Trace Macrocells (STM):
-	* reg: along with the physical base address and length of the register
-	  set as described above, another entry is required to describe the
-	  mapping of the extended stimulus port area.
-
-	* reg-names: the only acceptable values are "stm-base" and
-	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
-
-* Required properties for Coresight Cross Trigger Interface (CTI)
-	See coresight-cti.yaml for full CTI definitions.
-
-* Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators and non-configurable funnels:
-
-	* compatible: Currently supported value is (note the absence of the
-	  AMBA markee):
-		- Coresight Non-configurable Replicator:
-			"arm,coresight-static-replicator";
-			"arm,coresight-replicator"; (OBSOLETE. For backward
-				compatibility and will be removed)
-
-		- Coresight Non-configurable Funnel:
-			"arm,coresight-static-funnel";
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Optional properties for all components:
-
-	* arm,coresight-loses-context-with-cpu : boolean. Indicates that the
-	  hardware will lose register context on CPU power down (e.g. CPUIdle).
-	  An example of where this may be needed are systems which contain a
-	  coresight component and CPU in the same power domain. When the CPU
-	  powers down the coresight component also powers down and loses its
-	  context. This property is currently only used for the ETM 4.x driver.
-
-* Optional properties for ETM/PTMs:
-
-	* arm,cp14: must be present if the system accesses ETM/PTM management
-	  registers via co-processor 14.
-
-	* qcom,skip-power-up: boolean. Indicates that an implementation can
-	  skip powering up the trace unit. TRCPDCR.PU does not have to be set
-	  on Qualcomm Technologies Inc. systems since ETMs are in the same power
-	  domain as their CPU cores. This property is required to identify such
-	  systems with hardware errata where the CPU watchdog counter is stopped
-	  when TRCPDCR.PU is set.
-
-* Optional property for TMC:
-
-	* arm,buffer-size: size of contiguous buffer space for TMC ETR
-	  (embedded trace router). This property is obsolete. The buffer size
-	  can be configured dynamically via buffer_size property in sysfs.
-
-	* arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
-	  use the SG mode on this system.
-
-	* arm,max-burst-size: The maximum burst size initiated by TMC on the
-	  AXI master interface. The burst size can be in the range [0..15],
-	  the setting supports one data transfer per burst up to a maximum of
-	  16 data transfers per burst.
-
-* Optional property for CATU :
-	* interrupts : Exactly one SPI may be listed for reporting the address
-	  error
-
-* Optional property for configurable replicators:
-
-	* qcom,replicator-loses-context: boolean. Indicates that the replicator
-	  will lose register context when AMBA clock is removed which is observed
-	  in some replicator designs.
-
-Graph bindings for Coresight
--------------------------------
-
-Coresight components are interconnected to create a data path for the flow of
-trace data generated from the "sources" to their collection points "sink".
-Each coresight component must describe the "input" and "output" connections.
-The connections must be described via generic DT graph bindings as described
-by the "bindings/graph.txt", where each "port" along with an "endpoint"
-component represents a hardware port and the connection.
-
- * All output ports must be listed inside a child node named "out-ports"
- * All input ports must be listed inside a child node named "in-ports".
- * Port address must match the hardware port number.
-
-Example:
-
-1. Sinks
-	etb@20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-	};
-
-	etr@20070000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0 0x20070000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etr_in_port: endpoint {
-					remote-endpoint = <&replicator2_out_port0>;
-				};
-			};
-		};
-
-		out-ports {
-			port {
-				etr_out_port: endpoint {
-					remote-endpoint = <&catu_in_port>;
-				};
-			};
-		};
-	};
-
-2. Links
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel {
-		/*
-		 * non-configurable funnel don't show up on the AMBA
-		 * bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-funnel";
-		clocks = <&crg_ctrl HI3660_PCLK>;
-		clock-names = "apb_pclk";
-
-		out-ports {
-			port {
-				combo_funnel_out: endpoint {
-					remote-endpoint = <&top_funnel_in>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				combo_funnel_in0: endpoint {
-					remote-endpoint = <&cluster0_etf_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				combo_funnel_in1: endpoint {
-					remote-endpoint = <&cluster1_etf_out>;
-				};
-			};
-		};
-	};
-
-	funnel@20040000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-							<&replicator_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-		};
-	};
-
-3. Sources
-	ptm@2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
-				};
-			};
-		};
-	};
-
-4. STM
-	stm@20100000 {
-		compatible = "arm,coresight-stm", "arm,primecell";
-		reg = <0 0x20100000 0 0x1000>,
-		      <0 0x28000000 0 0x180000>;
-		reg-names = "stm-base", "stm-stimulus-base";
-
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				stm_out_port: endpoint {
-					remote-endpoint = <&main_funnel_in_port2>;
-				};
-			};
-		};
-	};
-
-5. CATU
-
-	catu@207e0000 {
-		compatible = "arm,coresight-catu", "arm,primecell";
-		reg = <0 0x207e0000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		in-ports {
-			port {
-				catu_in_port: endpoint {
-					remote-endpoint = <&etr_out_port>;
-				};
-			};
-		};
-	};
-
-[1]. There is currently two version of STM: STM32 and STM500.  Both
-have the same HW interface and as such don't need an explicit binding name.
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
index 35e5afb6d9ad..cc7b1402a31f 100644
--- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -27,16 +27,6 @@ Properties:
 - reg : Offset and length of the register set for the device
 
 
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-
 Example:
 
 cpus {
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index f2ab6423b4af..736b7ab1bd0a 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -4,15 +4,15 @@
 $id: http://devicetree.org/schemas/arm/cpus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM CPUs bindings
+title: ARM CPUs
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 
 description: |+
-  The device tree allows to describe the layout of CPUs in a system through
-  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-  defining properties for every cpu.
+  The device tree allows to describe the layout of CPUs in a system through the
+  "cpus" node, which in turn contains a number of subnodes (ie "cpu") defining
+  properties for every cpu.
 
   Bindings for CPU nodes follow the Devicetree Specification, available from:
 
@@ -41,52 +41,57 @@ description: |+
 properties:
   reg:
     maxItems: 1
-    description: |
-      Usage and definition depend on ARM architecture version and
-      configuration:
+    description: >
+      Usage and definition depend on ARM architecture version and configuration:
 
-      On uniprocessor ARM architectures previous to v7
-      this property is required and must be set to 0.
+      On uniprocessor ARM architectures previous to v7 this property is required
+      and must be set to 0.
 
-      On ARM 11 MPcore based systems this property is
-        required and matches the CPUID[11:0] register bits.
+      On ARM 11 MPcore based systems this property is required and matches the
+      CPUID[11:0] register bits.
 
-        Bits [11:0] in the reg cell must be set to
-        bits [11:0] in CPU ID register.
+        Bits [11:0] in the reg cell must be set to bits [11:0] in CPU ID register.
 
         All other bits in the reg cell must be set to 0.
 
-      On 32-bit ARM v7 or later systems this property is
-        required and matches the CPU MPIDR[23:0] register
-        bits.
+      On 32-bit ARM v7 or later systems this property is required and matches
+      the CPU MPIDR[23:0] register bits.
 
-        Bits [23:0] in the reg cell must be set to
-        bits [23:0] in MPIDR.
+        Bits [23:0] in the reg cell must be set to bits [23:0] in MPIDR.
 
         All other bits in the reg cell must be set to 0.
 
-      On ARM v8 64-bit systems this property is required
-        and matches the MPIDR_EL1 register affinity bits.
+      On ARM v8 64-bit systems this property is required and matches the
+      MPIDR_EL1 register affinity bits.
 
         * If cpus node's #address-cells property is set to 2
 
-          The first reg cell bits [7:0] must be set to
-          bits [39:32] of MPIDR_EL1.
+          The first reg cell bits [7:0] must be set to bits [39:32] of
+          MPIDR_EL1.
 
-          The second reg cell bits [23:0] must be set to
-          bits [23:0] of MPIDR_EL1.
+          The second reg cell bits [23:0] must be set to bits [23:0] of
+          MPIDR_EL1.
 
         * If cpus node's #address-cells property is set to 1
 
-          The reg cell bits [23:0] must be set to bits [23:0]
-          of MPIDR_EL1.
+          The reg cell bits [23:0] must be set to bits [23:0] of MPIDR_EL1.
 
       All other bits in the reg cells must be set to 0.
 
   compatible:
     enum:
-      - apple,icestorm
+      - apm,potenza
+      - apm,strega
+      - apple,avalanche
+      - apple,blizzard
+      - apple,cyclone
       - apple,firestorm
+      - apple,hurricane-zephyr
+      - apple,icestorm
+      - apple,mistral
+      - apple,monsoon
+      - apple,twister
+      - apple,typhoon
       - arm,arm710t
       - arm,arm720t
       - arm,arm740t
@@ -118,6 +123,10 @@ properties:
       - arm,arm1176jzf-s
       - arm,arm11mpcore
       - arm,armv8 # Only for s/w models
+      - arm,c1-nano
+      - arm,c1-premium
+      - arm,c1-pro
+      - arm,c1-ultra
       - arm,cortex-a5
       - arm,cortex-a7
       - arm,cortex-a8
@@ -137,6 +146,18 @@ properties:
       - arm,cortex-a75
       - arm,cortex-a76
       - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a78ae
+      - arm,cortex-a78c
+      - arm,cortex-a320
+      - arm,cortex-a510
+      - arm,cortex-a520
+      - arm,cortex-a520ae
+      - arm,cortex-a710
+      - arm,cortex-a715
+      - arm,cortex-a720
+      - arm,cortex-a720ae
+      - arm,cortex-a725
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -145,8 +166,22 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-r52
+      - arm,cortex-x1
+      - arm,cortex-x1c
+      - arm,cortex-x2
+      - arm,cortex-x3
+      - arm,cortex-x4
+      - arm,cortex-x925
       - arm,neoverse-e1
       - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-n3
+      - arm,neoverse-v1
+      - arm,neoverse-v2
+      - arm,neoverse-v3
+      - arm,neoverse-v3ae
+      - arm,rainier
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -166,18 +201,30 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
+      - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
+      - qcom,kryo360
       - qcom,kryo385
+      - qcom,kryo465
       - qcom,kryo468
+      - qcom,kryo470
       - qcom,kryo485
       - qcom,kryo560
       - qcom,kryo570
+      - qcom,kryo660
+      - qcom,kryo670
       - qcom,kryo685
+      - qcom,kryo780
+      - qcom,oryon
       - qcom,scorpion
+      - samsung,mongoose-m2
+      - samsung,mongoose-m3
+      - samsung,mongoose-m5
 
   enable-method:
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     oneOf:
       # On ARM v8 64-bit this property is required
       - enum:
@@ -212,6 +259,7 @@ properties:
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
           - qcom,msm8226-smp
+          - qcom,msm8909-smp
           # Only valid on ARM 32-bit, see above for ARM v8 64-bit
           - qcom,msm8916-smp
           - renesas,apmu
@@ -224,105 +272,151 @@ properties:
           - ti,am4372
 
   cpu-release-addr:
-    $ref: '/schemas/types.yaml#/definitions/uint64'
-
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
     description:
-      Required for systems that have an "enable-method"
-        property value of "spin-table".
-      On ARM v8 64-bit systems must be a two cell
-        property identifying a 64-bit zero-initialised
-        memory location.
+      The DT specification defines this as 64-bit always, but some 32-bit Arm
+      systems have used a 32-bit value which must be supported.
 
   cpu-idle-states:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    description: |
-      List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.yaml).
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      List of phandles to idle state nodes supported by this cpu (see
+      ./idle-states.yaml).
 
   capacity-dmips-mhz:
     description:
-      u32 value representing CPU capacity (see ./cpu-capacity.txt) in
-      DMIPS/MHz, relative to highest capacity-dmips-mhz
-      in the system.
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
+      DMIPS/MHz, relative to highest capacity-dmips-mhz in the system.
 
   cci-control-port: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
-    description:
-      A u32 value that represents the running time dynamic
-      power coefficient in units of uW/MHz/V^2. The
-      coefficient can either be calculated from power
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      A u32 value that represents the running time dynamic power coefficient in
+      units of uW/MHz/V^2. The coefficient can either be calculated from power
       measurements or derived by analysis.
 
-      The dynamic power consumption of the CPU  is
-      proportional to the square of the Voltage (V) and
-      the clock frequency (f). The coefficient is used to
+      The dynamic power consumption of the CPU  is proportional to the square of
+      the Voltage (V) and the clock frequency (f). The coefficient is used to
       calculate the dynamic power as below -
 
       Pdyn = dynamic-power-coefficient * V^2 * f
 
       where voltage is in V, frequency is in MHz.
 
+  interconnects:
+    minItems: 1
+    maxItems: 3
+
+  nvmem-cells:
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: speed_grade
+
   performance-domains:
     maxItems: 1
-    description:
-      List of phandles and performance domain specifiers, as defined by
-      bindings of the performance domain provider. See also
-      dvfs/performance-domain.yaml.
 
   power-domains:
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider (see also ../power_domain.txt).
+    minItems: 1
+    maxItems: 2
 
   power-domain-names:
     description:
-      A list of power domain name strings sorted in the same order as the
-      power-domains property.
-
       For PSCI based platforms, the name corresponding to the index of the PSCI
-      PM domain provider, must be "psci".
+      PM domain provider, must be "psci". For SCMI based platforms, the name
+      corresponding to the index of an SCMI performance domain provider, must be
+      "perf".
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ psci, perf, cpr ]
+
+  resets:
+    maxItems: 1
 
-  qcom,saw:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Specifies the SAW* node associated with this CPU.
+  arm-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
 
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+  cpu0-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
 
-      * arm/msm/qcom,saw2.txt
+  mem-supply: true
 
-  qcom,acc:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
-      Specifies the ACC* node associated with this CPU.
+  proc-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
+
+  pu-supply:
+    deprecated: true
+    description: Only for i.MX6Q/DL/SL SoCs.
 
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
-      "qcom,msm8916-smp".
+  soc-supply:
+    deprecated: true
+    description: Only for i.MX6/7 Soc.
 
-      * arm/msm/qcom,kpss-acc.txt
+  sram-supply:
+    deprecated: true
+    description: Use 'mem-supply' instead
+
+  fsl,soc-operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: FSL i.MX6 Soc operation-points when change cpu frequency
+    deprecated: true
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+  mediatek,cci:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Link to Mediatek Cache Coherent Interconnect
+
+  edac-enabled:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      A72 CPUs support Error Detection And Correction (EDAC) on their L1 and
+      L2 caches. This flag marks this function as usable.
+
+  qcom,saw:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the SAW node associated with this CPU.
+
+  qcom,acc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the ACC node associated with this CPU.
+
+  qcom,freq-domain:
+    description: Specifies the QCom CPUFREQ HW associated with the CPU.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
 
   rockchip,pmu:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: |
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
       Specifies the syscon node controlling the cpu core power domains.
 
-      Optional for systems that have an "enable-method"
-      property value of "rockchip,rk3066-smp"
-      While optional, it is the preferred way to get access to
-      the cpu-core power-domains.
+      Optional for systems that have an "enable-method" property value of
+      "rockchip,rk3066-smp". While optional, it is the preferred way to get
+      access to the cpu-core power-domains.
 
   secondary-boot-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
-    description: |
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
 
-      This includes the following SoCs: |
-      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      This includes the following SoCs:
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550,
       BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
 
       The secondary-boot-reg property is a u32 value that specifies the
@@ -331,22 +425,77 @@ properties:
       formed by encoding the target CPU id into the low bits of the
       physical start address it should jump to.
 
-if:
-  # If the enable-method property contains one of those values
-  properties:
-    enable-method:
-      contains:
-        enum:
-          - brcm,bcm11351-cpu-method
-          - brcm,bcm23550
-          - brcm,bcm-nsp-smp
-  # and if enable-method is present
-  required:
-    - enable-method
-
-then:
-  required:
-    - secondary-boot-reg
+  thermal-idle:
+    type: object
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+  - $ref: /schemas/opp/opp-v1.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,cortex-a72
+    then:
+      # Allow edac-enabled only for Cortex A72
+      properties:
+        edac-enabled: false
+
+  - if:
+      # If the enable-method property contains one of those values
+      properties:
+        enable-method:
+          contains:
+            enum:
+              - brcm,bcm11351-cpu-method
+              - brcm,bcm23550
+              - brcm,bcm-nsp-smp
+      # and if enable-method is present
+      required:
+        - enable-method
+    then:
+      required:
+        - secondary-boot-reg
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - spin-table
+            - renesas,r9a06g032-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - cpu-release-addr
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - qcom,kpss-acc-v1
+            - qcom,kpss-acc-v2
+            - qcom,msm8226-smp
+            - qcom,msm8916-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - qcom,acc
+        - qcom,saw
+    else:
+      if:
+        # 2 Qualcomm platforms bootloaders need qcom,acc and qcom,saw yet use
+        # "spin-table" or "psci" enable-methods. Disallowing the properties for
+        # all other CPUs is the best we can do as there's not any way to
+        # distinguish these Qualcomm platforms.
+        not:
+          properties:
+            compatible:
+              const: arm,cortex-a53
+      then:
+        properties:
+          qcom,acc: false
+          qcom,saw: false
 
 required:
   - device_type
@@ -356,7 +505,7 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml
index a35de3c9e284..0cf9ddaa527e 100644
--- a/Documentation/devicetree/bindings/arm/digicolor.yaml
+++ b/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/digicolor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Conexant Digicolor Platforms Device Tree Bindings
+title: Conexant Digicolor Platforms
 
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
diff --git a/Documentation/devicetree/bindings/arm/ete.yaml b/Documentation/devicetree/bindings/arm/ete.yaml
deleted file mode 100644
index 7f9b2d1e1147..000000000000
--- a/Documentation/devicetree/bindings/arm/ete.yaml
+++ /dev/null
@@ -1,75 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2021, Arm Ltd
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/arm/ete.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: ARM Embedded Trace Extensions
-
-maintainers:
-  - Suzuki K Poulose <suzuki.poulose@arm.com>
-  - Mathieu Poirier <mathieu.poirier@linaro.org>
-
-description: |
-  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
-  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
-  architecture and has extended support for future architecture changes.
-  The trace generated by the ETE could be stored via legacy CoreSight
-  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
-  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
-  legacy CoreSight components, a node must be listed per instance, along
-  with any optional connection graph as per the coresight bindings.
-  See bindings/arm/coresight.txt.
-
-properties:
-  $nodename:
-    pattern: "^ete([0-9a-f]+)$"
-  compatible:
-    items:
-      - const: arm,embedded-trace-extension
-
-  cpu:
-    description: |
-      Handle to the cpu this ETE is bound to.
-    $ref: /schemas/types.yaml#/definitions/phandle
-
-  out-ports:
-    description: |
-      Output connections from the ETE to legacy CoreSight trace bus.
-    $ref: /schemas/graph.yaml#/properties/ports
-    properties:
-      port:
-        description: Output connection from the ETE to legacy CoreSight Trace bus.
-        $ref: /schemas/graph.yaml#/properties/port
-
-required:
-  - compatible
-  - cpu
-
-additionalProperties: false
-
-examples:
-
-# An ETE node without legacy CoreSight connections
-  - |
-    ete0 {
-      compatible = "arm,embedded-trace-extension";
-      cpu = <&cpu_0>;
-    };
-# An ETE node with legacy CoreSight connections
-  - |
-   ete1 {
-      compatible = "arm,embedded-trace-extension";
-      cpu = <&cpu_1>;
-
-      out-ports {        /* legacy coresight connection */
-         port {
-             ete1_out_port: endpoint {
-                remote-endpoint = <&funnel_in_port0>;
-             };
-         };
-      };
-   };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
index c24047c1fdd5..5d033570b57b 100644
--- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
+++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OP-TEE Device Tree Bindings
+title: OP-TEE
 
 maintainers:
   - Jens Wiklander <jens.wiklander@linaro.org>
@@ -24,6 +24,13 @@ properties:
   compatible:
     const: linaro,optee-tz
 
+  interrupts:
+    maxItems: 1
+    description: |
+      This interrupt which is used to signal an event by the secure world
+      software is expected to be either a per-cpu interrupt or an
+      edge-triggered peripheral interrupt.
+
   method:
     enum: [smc, hvc]
     description: |
@@ -42,10 +49,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     firmware  {
         optee  {
             compatible = "linaro,optee-tz";
             method = "smc";
+            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
index 9d1857c0aa07..e3980b659f63 100644
--- a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
+++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Trusted Foundations
 
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml
new file mode 100644
index 000000000000..1f515bea3959
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx51-m4if.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx51-m4if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Multi Master Multi Memory Interface (M4IF) and Tigerp module
+
+description: collect the imx devices, which only have compatible and reg property
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx51-m4if
+          - fsl,imx51-tigerp
+          - fsl,imx51-aipstz
+          - fsl,imx53-aipstz
+          - fsl,imx7d-pcie-phy
+      - items:
+          - const: fsl,imx53-tigerp
+          - const: fsl,imx51-tigerp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    m4if@83fd8000 {
+        compatible = "fsl,imx51-m4if";
+        reg = <0x83fd8000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
index 3b26040f8f18..9d377e193c12 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -28,6 +28,14 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: divcore
+      - const: hsrun_divcore
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
index 526f508cb98d..bd39cf107f3e 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX7ULP System Integration Module
 
 maintainers:
-  - Anson Huang <anson.huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   The system integration module (SIM) provides system control and chip configuration
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
deleted file mode 100644
index b5cb374dc47d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale DCFG
-
-DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-dcfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
-	dcfg: dcfg@1ee0000 {
-		compatible = "fsl,ls1021a-dcfg";
-		reg = <0x0 0x1ee0000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
deleted file mode 100644
index 0ab67b0b216d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale SCFG
-
-SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-scfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
deleted file mode 100644
index fd0061712443..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ /dev/null
@@ -1,270 +0,0 @@
-NXP i.MX System Controller Firmware (SCFW)
---------------------------------------------------------------------
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-The AP communicates with the SC using a multi-ported MU module found
-in the LSIO subsystem. The current definition of this MU module provides
-5 remote AP connections to the SC to support up to 5 execution environments
-(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
-with the LSIO DSC IP bus. The SC firmware will communicate with this MU
-using the MSI bus.
-
-System Controller Device Node:
-============================================================
-
-The scu node with the following properties shall be under the /firmware/ node.
-
-Required properties:
--------------------
-- compatible:	should be "fsl,imx-scu".
-- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
-			       "rx0", "rx1", "rx2", "rx3";
-		include "gip3" if want to support general MU interrupt.
-- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
-		rx, and 1 optional MU channel for general interrupt.
-		All MU channels must be in the same MU instance.
-		Cross instances are not allowed. The MU instance can only
-		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
-		to make sure use the one which is not conflict with other
-		execution environments. e.g. ATF.
-		Note:
-		Channel 0 must be "tx0" or "rx0".
-		Channel 1 must be "tx1" or "rx1".
-		Channel 2 must be "tx2" or "rx2".
-		Channel 3 must be "tx3" or "rx3".
-		General interrupt rx channel must be "gip3".
-		e.g.
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
-		for detailed mailbox binding.
-
-Note: Each mu which supports general interrupt should have an alias correctly
-numbered in "aliases" node.
-e.g.
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-i.MX SCU Client Device Node:
-============================================================
-
-Client nodes are maintained as children of the relevant IMX-SCU device node.
-
-Power domain bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding for the SCU power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-scu-pd",
-			  "fsl,imx8qxp-scu-pd"
-			followed by "fsl,scu-pd"
-
-- #power-domain-cells:	Must be 1. Contains the Resource ID used by
-			SCU commands.
-			See detailed Resource ID list from:
-			include/dt-bindings/firmware/imx/rsrc.h
-
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-clk"
-			  "fsl,imx8qxp-clk"
-			followed by "fsl,scu-clk"
-- #clock-cells:		Should be 2.
-			Contains the Resource and Clock ID value.
-- clocks:		List of clock specifiers, must contain an entry for
-			each required entry in clock-names
-- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Pinctrl bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the i.MX common pinctrl binding[3].
-
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-iomuxc",
-			"fsl,imx8qxp-iomuxc",
-			"fsl,imx8dxl-iomuxc".
-
-Required properties for Pinctrl sub nodes:
-- fsl,pins:		Each entry consists of 3 integers which represents
-			the mux and config setting for one pin. The first 2
-			integers <pin_id mux_mode> are specified using a
-			PIN_FUNC_ID macro, which can be found in
-			<dt-bindings/pinctrl/pads-imx8qm.h>,
-			<dt-bindings/pinctrl/pads-imx8qxp.h>,
-			<dt-bindings/pinctrl/pads-imx8dxl.h>.
-			The last integer CONFIG is the pad setting value like
-			pull-up on this pin.
-
-			Please refer to i.MX8QXP Reference Manual for detailed
-			CONFIG settings.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
-
-RTC bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be "fsl,imx8qxp-sc-rtc";
-
-OCOTP bindings based on SCU Message Protocol
-------------------------------------------------------------
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-scu-ocotp",
-			"fsl,imx8qxp-scu-ocotp".
-- #address-cells:	Must be 1. Contains byte index
-- #size-cells:		Must be 1. Contains byte length
-
-Optional Child nodes:
-
-- Data cells of ocotp:
-  Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Watchdog bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-wdt"
-              followed by "fsl,imx-sc-wdt";
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-SCU key bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-key"
-              followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Thermal bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible:			Should be :
-				  "fsl,imx8qxp-sc-thermal"
-				followed by "fsl,imx-sc-thermal";
-
-- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
-				for a description.
-
-Example (imx8qxp):
--------------
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-lsio_mu1: mailbox@5d1c0000 {
-	...
-	#mbox-cells = <2>;
-};
-
-firmware {
-	scu {
-		compatible = "fsl,imx-scu";
-		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3",
-			     "gip3";
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-
-		clk: clk {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
-			#clock-cells = <2>;
-		};
-
-		iomuxc {
-			compatible = "fsl,imx8qxp-iomuxc";
-
-			pinctrl_lpuart0: lpuart0grp {
-				fsl,pins = <
-					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
-					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
-				>;
-			};
-			...
-		};
-
-		ocotp: imx8qx-ocotp {
-			compatible = "fsl,imx8qxp-scu-ocotp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			fec_mac0: mac@2c4 {
-				reg = <0x2c4 8>;
-			};
-		};
-
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
-			#power-domain-cells = <1>;
-		};
-
-		rtc: rtc {
-			compatible = "fsl,imx8qxp-sc-rtc";
-		};
-
-		scu_key: scu-key {
-			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycodes = <KEY_POWER>;
-		};
-
-		watchdog {
-			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
-			timeout-sec = <60>;
-		};
-
-		tsens: thermal-sensor {
-			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-};
-
-serial@5a060000 {
-	...
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-	clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
-	clock-names = "ipg";
-	power-domains = <&pd IMX_SC_R_UART_0>;
-};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
deleted file mode 100644
index 44aa3c451ccf..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - CPU Configuration
-
-The MSCM IP contains multiple sub modules, this binding describes the first
-block of registers which contains CPU configuration information.
-
-Required properties:
-- compatible:	"fsl,vf610-mscm-cpucfg", "syscon"
-- reg:		the register range of the MSCM CPU configuration registers
-
-Example:
-	mscm_cpucfg: cpucfg@40001000 {
-		compatible = "fsl,vf610-mscm-cpucfg", "syscon";
-		reg = <0x40001000 0x800>;
-	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
deleted file mode 100644
index 6dd6f399236d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - Interrupt Router
-
-The MSCM IP contains multiple sub modules, this binding describes the second
-block of registers which control the interrupt router. The interrupt router
-allows to configure the recipient of each peripheral interrupt. Furthermore
-it controls the directed processor interrupts. The module is available in all
-Vybrid SoC's but is only really useful in dual core configurations (VF6xx
-which comes with a Cortex-A5/Cortex-M4 combination).
-
-Required properties:
-- compatible:		"fsl,vf610-mscm-ir"
-- reg:			the register range of the MSCM Interrupt Router
-- fsl,cpucfg:		The handle to the MSCM CPU configuration node, required
-			to get the current CPU ID
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Two cells, interrupt number and cells.
-			The hardware interrupt number according to interrupt
-			assignment of the interrupt router is required.
-			Flags get passed only when using GIC as parent. Flags
-			encoding as documented by the GIC bindings.
-
-Example:
-	mscm_ir: interrupt-controller@40001800 {
-		compatible = "fsl,vf610-mscm-ir";
-		reg = <0x40001800 0x400>;
-		fsl,cpucfg = <&mscm_cpucfg>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/m4if.txt b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
deleted file mode 100644
index 93bd7b867a53..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/m4if.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale Multi Master Multi Memory Interface (M4IF) module
-
-Required properties:
-- compatible : Should be "fsl,imx51-m4if"
-- reg : Address and length of the register set for the device
-
-Example:
-
-m4if: m4if@83fd8000 {
-	compatible = "fsl,imx51-m4if";
-	reg = <0x83fd8000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
deleted file mode 100644
index 19e2aad63d6e..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale Tigerp platform module
-
-Required properties:
-- compatible : Should be "fsl,imx51-tigerp"
-- reg : Address and length of the register set for the device
-
-Example:
-
-tigerp: tigerp@83fa0000 {
-	compatible = "fsl,imx51-tigerp";
-	reg = <0x83fa0000 0x28>;
-};
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0b595b26061f..68a2d5fecc43 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/arm/fsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Platforms Device Tree Bindings
+title: Freescale i.MX Platforms
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 properties:
   $nodename:
@@ -25,8 +24,11 @@ properties:
       - description: i.MX23 based Boards
         items:
           - enum:
+              - creative,x-fi3
               - fsl,imx23-evk
+              - fsl,stmp378x-devb
               - olimex,imx23-olinuxino
+              - sandisk,sansa_fuze_plus
           - const: fsl,imx23
 
       - description: i.MX25 Product Development Kit
@@ -87,13 +89,59 @@ properties:
       - description: i.MX28 based Boards
         items:
           - enum:
+              - amarula,imx28-rmm
               - armadeus,imx28-apf28      # APF28 SoM
-              - armadeus,imx28-apf28dev   # APF28 SoM on APF28Dev board
+              - bluegiga,apx4devkit       # Bluegiga APx4 SoM on dev board
+              - crystalfontz,cfa10036     # Crystalfontz CFA-10036 SoM
+              - eukrea,mbmx28lc
               - fsl,imx28-evk
               - i2se,duckbill
               - i2se,duckbill-2
+              - karo,tx28                 # Ka-Ro electronics TX28 module
+              - lwn,imx28-btt3
+              - lwn,imx28-xea
+              - msr,m28cu3                # M28 SoM with custom base board
+              - schulercontrol,imx28-sps1
               - technologic,imx28-ts4600
           - const: fsl,imx28
+
+      - description: i.MX28 Aries M28 SoM Board
+        items:
+          - const: aries,m28
+          - const: denx,m28
+          - const: fsl,imx28
+
+      - description: i.MX28 Aries M28EVK Board
+        items:
+          - const: aries,m28evk
+          - const: denx,m28evk
+          - const: fsl,imx28
+
+      - description: i.MX28 Armadeus Systems APF28Dev Board
+        items:
+          - const: armadeus,imx28-apf28dev
+          - const: armadeus,imx28-apf28
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10036 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10037
+              - crystalfontz,cfa10049
+              - crystalfontz,cfa10057
+              - crystalfontz,cfa10058
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10037 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10055
+              - crystalfontz,cfa10056
+          - const: crystalfontz,cfa10037
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
       - description: i.MX28 Duckbill 2 based Boards
         items:
           - enum:
@@ -103,6 +151,19 @@ properties:
           - const: i2se,duckbill-2
           - const: fsl,imx28
 
+      - description: i.MX28 Eukrea Electromatique MBMX283LC Board
+        items:
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
+      - description: i.MX28 Eukrea Electromatique MBMX287LC Board
+        items:
+          - const: eukrea,mbmx287lc
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
       - description: i.MX31 based Boards
         items:
           - enum:
@@ -172,7 +233,8 @@ properties:
               - karo,tx53                     # Ka-Ro electronics TX53 module
               - kiebackpeter,imx53-ddc        # K+P imx53 DDC
               - kiebackpeter,imx53-hsc        # K+P imx53 HSC
-              - menlo,m53menlo
+              - menlo,m53menlo                # i.MX53 Menlo board
+              - starterkit,sk-imx53
               - voipac,imx53-dmm-668          # Voipac i.MX53 X53-DMM-668
           - const: fsl,imx53
 
@@ -192,6 +254,7 @@ properties:
         items:
           - enum:
               - auvidea,h100              # Auvidea H100
+              - bosch,imx6q-acc           # Bosch ACC i.MX6 Dual
               - boundary,imx6q-nitrogen6_max
               - boundary,imx6q-nitrogen6_som2
               - boundary,imx6q-nitrogen6x
@@ -235,11 +298,12 @@ properties:
               - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
-              - toradex,apalis_imx6q      # Apalis iMX6 Modules
               - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
               - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
               - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
+              - ysoft,imx6q-yapp4-pegasus # i.MX6 Quad Y Soft IOTA Pegasus board
               - zealz,imx6q-gk802         # Zealz GK802
               - zii,imx6q-zii-rdu2        # ZII RDU2 Board
           - const: fsl,imx6q
@@ -299,6 +363,12 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6q
 
+      - description: i.MX6Q Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+        items:
+          - const: kontron,imx6q-samx6i-ads2
+          - const: kontron,imx6q-samx6i
+          - const: fsl,imx6q
+
       - description: i.MX6Q PHYTEC phyBOARD-Mira
         items:
           - enum:
@@ -310,7 +380,9 @@ properties:
 
       - description: i.MX6Q PHYTEC phyFLEX-i.MX6
         items:
-          - const: phytec,imx6q-pbab01    # PHYTEC phyFLEX carrier board
+          - enum:
+              - comvetia,imx6q-lxr        # Comvetia LXR board
+              - phytec,imx6q-pbab01       # PHYTEC phyFLEX carrier board
           - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
           - const: fsl,imx6q
 
@@ -319,10 +391,32 @@ properties:
           - enum:
               - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
               - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
-              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+              - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1
+              - toradex,apalis_imx6q-eval-v1.2  # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
+      - description: i.MX6Q Variscite VAR-SOM-MX6 Boards
+        items:
+          - const: variscite,mx6customboard
+          - const: variscite,var-som-imx6q
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-a
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-b
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -334,6 +428,8 @@ properties:
               - kvg,vicutp                # Kverneland UT1P board
               - prt,prtwd3                # Protonic WD3 board
               - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
+              - ysoft,imx6qp-yapp4-pegasus-plus # i.MX6 Quad Plus Y Soft IOTA Pegasus+ board
               - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
           - const: fsl,imx6qp
 
@@ -344,6 +440,13 @@ properties:
           - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
           - const: fsl,imx6qp
 
+      - description: TQ-Systems TQMa6QP SoM on MBa6x
+        items:
+          - const: tq,imx6qp-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6qp-tqma6qp-b
+          - const: fsl,imx6qp
+
       - description: i.MX6DL based Boards
         items:
           - enum:
@@ -375,6 +478,7 @@ properties:
               - prt,prtvt7                # Protonic VT7 board
               - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
               - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - sielaff,imx6dl-board      # Sielaff i.MX6 Solo Board
               - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
               - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
               - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
@@ -387,14 +491,14 @@ properties:
               - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
-              - toradex,colibri_imx6dl      # Colibri iMX6 Modules
-              - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules
               - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
               - vdl,lanmcu                # Van der Laan LANMCU board
               - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
-              - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
+              - ysoft,imx6dl-yapp4-draco  # i.MX6 Solo Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-lynx   # i.MX6 DualLite Y Soft IOTA Lynx board
               - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
+              - ysoft,imx6dl-yapp4-phoenix  # i.MX6 DualLite Y Soft IOTA Phoenix board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
@@ -421,9 +525,11 @@ properties:
           - const: dfi,fs700e-m60
           - const: fsl,imx6dl
 
-      - description: i.MX6DL DHCOM PicoITX Board
+      - description: i.MX6DL DHCOM based Boards
         items:
-          - const: dh,imx6dl-dhcom-picoitx
+          - enum:
+              - dh,imx6dl-dhcom-pdk2         # i.MX6DL DHCOM SoM on PDK2 board
+              - dh,imx6dl-dhcom-picoitx      # i.MX6DL DHCOM SoM on PicoITX board
           - const: dh,imx6dl-dhcom-som
           - const: fsl,imx6dl
 
@@ -447,6 +553,12 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6dl
 
+      - description: i.MX6DL Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+        items:
+          - const: kontron,imx6dl-samx6i-ads2
+          - const: kontron,imx6dl-samx6i
+          - const: fsl,imx6dl
+
       - description: i.MX6DL PHYTEC phyBOARD-Mira
         items:
           - enum:
@@ -465,29 +577,41 @@ properties:
       - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
         items:
           - enum:
+              - toradex,colibri_imx6dl-aster        # Colibri iMX6DL/S Module on Aster Board
               - toradex,colibri_imx6dl-eval-v3      # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-iris         # Colibri iMX6DL/S Module on Iris Board
+              - toradex,colibri_imx6dl-iris-v2      # Colibri iMX6DL/S Module on Iris Board V2
           - const: toradex,colibri_imx6dl           # Colibri iMX6DL/S Module
           - const: fsl,imx6dl
 
-      - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules
-        items:
-          - enum:
-              - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3
-          - const: toradex,colibri_imx6dl-v1_1      # Colibri iMX6DL/S V1.1 Module
-          - const: fsl,imx6dl
-
       - description: i.MX6S DHCOM DRC02 Board
         items:
           - const: dh,imx6s-dhcom-drc02
           - const: dh,imx6s-dhcom-som
           - const: fsl,imx6dl
 
+      - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-a
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-b
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,aura2
               - kobo,tolino-shine2hd
               - kobo,tolino-shine3
+              - kobo,tolino-vision
               - kobo,tolino-vision5
               - revotics,imx6sl-warp      # Revotics WaRP Board
           - const: fsl,imx6sl
@@ -500,6 +624,14 @@ properties:
               - kobo,librah2o
           - const: fsl,imx6sll
 
+      - description: i.MX6SLL Kobo Clara 2e Rev. A/B
+        items:
+          - enum:
+              - kobo,clara2e-a
+              - kobo,clara2e-b
+          - const: kobo,clara2e
+          - const: fsl,imx6sll
+
       - description: i.MX6SX based Boards
         items:
           - enum:
@@ -520,8 +652,7 @@ properties:
               - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
-              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
-              - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
               - prt,prti6g                # Protonic PRTI6G Board
               - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
               - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
@@ -557,34 +688,55 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S Board
+      - description: i.MX6UL Variscite VAR-SOM-MX6 Boards
         items:
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: variscite,mx6ulconcerto
+          - const: variscite,var-som-imx6ul
           - const: fsl,imx6ul
 
-      - description: Kontron N6311 S Board
+      - description: Kontron BL i.MX6UL (N631X S) Board
         items:
-          - const: kontron,imx6ul-n6311-s
-          - const: kontron,imx6ul-n6311-som
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S 43 Board
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
         items:
-          - const: kontron,imx6ul-n6310-s-43
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul1-mba6ulx
+          - const: tq,imx6ul-tqma6ul1      # MCIMX6G1
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2-mba6ulx
+          - const: tq,imx6ul-tqma6ul2      # MCIMX6G2
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+              - tq,imx6ul-tqma6ul2l-mba6ulxl
+          - const: tq,imx6ul-tqma6ul2l      # MCIMX6G2, LGA SoM variant
           - const: fsl,imx6ul
 
       - description: i.MX6ULL based Boards
         items:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
-              - kontron,imx6ull-n6411-som # Kontron N6411 SOM
+              - joz,jozacp                # JOZ Access Point
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
-              - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
-              - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
-              - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+              - uni-t,uti260b             # UNI-T UTi260B Thermal Camera
           - const: fsl,imx6ull
 
       - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -593,6 +745,40 @@ properties:
           - const: armadeus,imx6ull-opos6ul     # OPOS6UL (i.MX6ULL) SoM
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL chargebyte Tarragon Boards
+        items:
+          - enum:
+              - chargebyte,imx6ull-tarragon-master
+              - chargebyte,imx6ull-tarragon-micro
+              - chargebyte,imx6ull-tarragon-slave
+              - chargebyte,imx6ull-tarragon-slavext
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL DHCOM SoM based Boards
+        items:
+          - enum:
+              - dh,imx6ull-dhcom-drc02
+              - dh,imx6ull-dhcom-pdk2
+              - dh,imx6ull-dhcom-picoitx
+          - const: dh,imx6ull-dhcom-som # The DHCOR is soldered on the DHCOM
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL DHCOR SoM based Boards
+        items:
+          - const: marantec,imx6ull-dhcor-maveo-box
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Engicam MicroGEA SoM based boards
+        items:
+          - enum:
+              - engicam,microgea-imx6ull-bmm       # i.MX6ULL Engicam MicroGEA BMM Board
+              - engicam,microgea-imx6ull-gtw       # i.MX6ULL Engicam MicroGEA GTW Board
+              - engicam,microgea-imx6ull-rmm       # i.MX6ULL Engicam MicroGEA RMM Board
+          - const: engicam,microgea-imx6ull        # i.MX6ULL Engicam MicroGEA SoM
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL PHYTEC phyBOARD-Segin
         items:
           - enum:
@@ -602,36 +788,78 @@ properties:
           - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL PHYTEC phyGATE-Tauri
+        items:
+          - enum:
+              - phytec,imx6ull-phygate-tauri-emmc
+              - phytec,imx6ull-phygate-tauri-nand
+          - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
         items:
           - enum:
-              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Evaluation Board
+              - toradex,colibri-imx6ull-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-eval      # Colibri Evaluation Board V3
+              - toradex,colibri-imx6ull-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-iris-v2   # Iris V2 Carrier Board
           - const: toradex,colibri-imx6ull        # Colibri iMX6ULL Module
-          - const: fsl,imx6dl
+          - const: fsl,imx6ull
 
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
         items:
           - enum:
-              - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board
-          - const: toradex,colibri-imx6ull-emmc   # Colibri iMX6ULL 1GB (eMMC) Module
-          - const: fsl,imx6dl
+              - toradex,colibri-imx6ull-emmc-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-emmc-eval      # Colibri Evaluation B. V3
+              - toradex,colibri-imx6ull-emmc-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-emmc-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-emmc        # Colibri iMX6ULL 1GB (eMMC) Module
+          - const: fsl,imx6ull
 
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
         items:
           - enum:
-              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board
-          - const: toradex,colibri-imx6ull-wifi   # Colibri iMX6ULL Wi-Fi / BT Module
-          - const: fsl,imx6dl
+              - toradex,colibri-imx6ull-wifi-eval     # Colibri Eval. B. V3
+              - toradex,colibri-imx6ull-wifi-aster    # Aster Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris     # Iris Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris-v2  # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
+          - const: fsl,imx6ull
 
-      - description: Kontron N6411 S Board
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
         items:
-          - const: kontron,imx6ull-n6411-s
-          - const: kontron,imx6ull-n6411-som
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
+          - const: fsl,imx6ull
+
+      - description: TQ-Systems TQMa6ULLx SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2-mba6ulx # TQMa6ULL socketable SoM with MCIMX6Y2 on MBa6ULx EVK
+          - const: tq,imx6ull-tqma6ull2      # TQMa6ULL socketable SoM with MCIMX6Y2
+          - const: fsl,imx6ull
+
+      - description: TQ-Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2l-mba6ulx  # TQMa6ULLxL LGA SoM with socketable Adapter on MBa6ULx EVK
+              - tq,imx6ull-tqma6ull2l-mba6ulxl # TQMa6ULLxL LGA SoM on MBa6ULxL gateway board
+          - const: tq,imx6ull-tqma6ull2l       # TQMa6ULLxL LGA SoM with MCIMX6Y2
+          - const: fsl,imx6ull
+
+      - description: Seeed Stuido i.MX6ULL SoM on dev boards
+        items:
+          - enum:
+              - seeed,imx6ull-seeed-npi-emmc
+              - seeed,imx6ull-seeed-npi-nand
+          - const: seeed,imx6ull-seeed-npi
           - const: fsl,imx6ull
 
       - description: i.MX6ULZ based Boards
         items:
           - enum:
+              - bsh,imx6ulz-bsh-smm-m2    # i.MX6 ULZ BSH SystemMaster
               - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
           - const: fsl,imx6ull # This seems odd. Should be last?
           - const: fsl,imx6ulz
@@ -648,6 +876,8 @@ properties:
           - enum:
               - toradex,colibri-imx7s-aster     # Module on Aster Carrier Board
               - toradex,colibri-imx7s-eval-v3   # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7s-iris      # Module on Iris Carrier Board
+              - toradex,colibri-imx7s-iris-v2   # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7s
           - const: fsl,imx7s
 
@@ -668,12 +898,11 @@ properties:
               - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
               - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
+              - storopack,imx7d-smegw01       # Storopack i.MX7D SMEGW01
               - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
               - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
               - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
               - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
-              - toradex,colibri-imx7d         # Colibri iMX7D Module
-              - toradex,colibri-imx7d-emmc    # Colibri iMX7D 1GB (eMMC) Module
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board
           - const: fsl,imx7d
@@ -698,8 +927,10 @@ properties:
       - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
         items:
           - enum:
-              - toradex,colibri-imx7d-aster   # Colibri iMX7D Module on Aster Carrier Board
-              - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-aster   # Aster Carrier Board
+              - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-iris    # Iris Carrier Board
+              - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
           - const: toradex,colibri-imx7d
           - const: fsl,imx7d
 
@@ -708,6 +939,8 @@ properties:
           - enum:
               - toradex,colibri-imx7d-emmc-aster    # Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc-eval-v3  # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-iris     # Module on Iris Carrier Board
+              - toradex,colibri-imx7d-emmc-iris-v2  # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7d-emmc
           - const: fsl,imx7d
 
@@ -723,15 +956,36 @@ properties:
           - enum:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
               - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+              - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
+              - gateworks,imx8mm-gw75xx-0x # i.MX8MM Gateworks Board
+              - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
-              - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
-              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - innocomm,wb15-evk         # i.MX8MM Innocomm EVK board with WB15 SoM
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
+          - const: fsl,imx8mm
+
+      - description: Compulab i.MX8MM UCM SoM based boards
+        items:
+          - enum:
+              - compulab,imx8mm-iot-gateway     # i.MX8MM Compulab IoT-Gateway
+          - const: compulab,imx8mm-ucm-som      # i.MX8MM Compulab UCM SoM
+          - const: fsl,imx8mm
+
+      - description: Emtop i.MX8MM based Boards
+        items:
+          - const: ees,imx8mm-emtop-baseboard      # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
+          - const: ees,imx8mm-emtop-som            # i.MX8MM Emtop SOM-IMX8MMLPD4 module
           - const: fsl,imx8mm
 
       - description: Engicam i.Core MX8M Mini SoM based boards
@@ -744,8 +998,47 @@ properties:
 
       - description: Kontron BL i.MX8MM (N801X S) Board
         items:
-          - const: kontron,imx8mm-n801x-s
-          - const: kontron,imx8mm-n801x-som
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Modules
+        items:
+          - enum:
+              - menlo,mx8menlo                       # Verdin iMX8M Mini Module on i.MX8MM Menlo board
+              - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
+              - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+              - toradex,verdin-imx8mm-nonwifi-ivy    # Verdin iMX8M Mini Module on Ivy
+              - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow
+              - toradex,verdin-imx8mm-nonwifi-yavia  # Verdin iMX8M Mini Module on Yavia
+          - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mm-wifi-ivy    # Verdin iMX8M Mini Wi-Fi / BT Module on Ivy
+              - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow
+              - toradex,verdin-imx8mm-wifi-yavia  # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+        items:
+          - enum:
+              - phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+              - phytec,imx8mm-phygate-tauri-l    # phyGATE-Tauri-L Gateway
+          - const: phytec,imx8mm-phycore-som        # phyCORE-i.MX8MM SoM
           - const: fsl,imx8mm
 
       - description: Variscite VAR-SOM-MX8MM based boards
@@ -754,10 +1047,25 @@ properties:
           - const: variscite,var-som-mx8mm
           - const: fsl,imx8mm
 
+      - description:
+          TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - cloos,imx8mm-phg           # i.MX8MM Cloos PHG Board
+              - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx
+          - const: tq,imx8mm-tqma8mqml     # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM
+          - const: fsl,imx8mm
+
       - description: i.MX8MN based Boards
         items:
           - enum:
               - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
+              - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
+              - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
+              - fsl,imx8mn-ddr3l-evk      # i.MX8MN DDR3L EVK Board
               - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
               - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
@@ -765,14 +1073,115 @@ properties:
 
       - description: Variscite VAR-SOM-MX8MN based boards
         items:
-          - const: variscite,var-som-mx8mn-symphony
+          - enum:
+              - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
+              - rve,gateway # i.MX8MN RVE Gateway Board
+              - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
 
+      - description:
+          TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx
+          - const: tq,imx8mn-tqma8mqnl     # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM
+          - const: fsl,imx8mn
+
       - description: i.MX8MP based Boards
         items:
           - enum:
+              - beacon,imx8mp-beacon-kit  # i.MX8MP Beacon Development Kit
+              - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
+              - emcraft,imx8mp-navqp      # i.MX8MP Emcraft Systems NavQ+ Kit
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
+              - fsl,imx8mp-evk-revb4      # i.MX8MP EVK Rev B4 Board
+              - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
+              - gocontroll,moduline-display # GOcontroll Moduline Display controller
+              - prt,prt8ml             # Protonic PRT8ML
+              - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
+              - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
+              - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
+              - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
+              - skov,imx8mp-skov-revc-hdmi # SKOV i.MX8MP climate control without panel
+              - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
+              - skov,imx8mp-skov-revc-jutouch-jt101tm023 # SKOV i.MX8MP climate control with 10" JuTouch panel
+              - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
+              - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board
+              - ysoft,imx8mp-iota2-lumpy  # Y Soft i.MX8MP IOTA2 Lumpy Board
+          - const: fsl,imx8mp
+
+      - description: ABB Boards with i.MX8M Plus Modules from ADLink
+        items:
+          - enum:
+              - abb,imx8mp-aristanetos3-adpismarc # i.MX8MP ABB SoM on PI SMARC Board
+              - abb,imx8mp-aristanetos3-helios    # i.MX8MP ABB SoM on helios Board
+              - abb,imx8mp-aristanetos3-proton2s  # i.MX8MP ABB SoM on proton2s Board
+          - const: abb,imx8mp-aristanetos3-som    # i.MX8MP ABB SoM
+          - const: fsl,imx8mp
+
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
+      - description: Boundary Devices Nitrogen8M Plus ENC Carrier Board
+        items:
+          - const: boundary,imx8mp-nitrogen-enc-carrier-board
+          - const: boundary,imx8mp-nitrogen-som
+          - const: fsl,imx8mp
+
+      - description: Boundary Device Nitrogen8MP Universal SMARC Carrier Board
+        items:
+          - const: boundary,imx8mp-nitrogen-smarc-universal-board
+          - const: boundary,imx8mp-nitrogen-smarc-som
+          - const: fsl,imx8mp
+
+      - description: i.MX8MP DHCOM based Boards
+        items:
+          - enum:
+              - dh,imx8mp-dhcom-drc02        # i.MX8MP DHCOM SoM on DRC02 board
+              - dh,imx8mp-dhcom-pdk2         # i.MX8MP DHCOM SoM on PDK2 board
+              - dh,imx8mp-dhcom-pdk3         # i.MX8MP DHCOM SoM on PDK3 board
+              - dh,imx8mp-dhcom-picoitx      # i.MX8MP DHCOM SoM on PicoITX board
+          - const: dh,imx8mp-dhcom-som       # i.MX8MP DHCOM SoM
+          - const: fsl,imx8mp
+
+      - description: Engicam i.Core MX8M Plus SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mp-edimm2.2       # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
+          - const: fsl,imx8mp
+
+      - description: Kontron i.MX8MP OSM-S SoM based Boards
+        items:
+          - const: kontron,imx8mp-bl-osm-s  # Kontron BL i.MX8MP OSM-S Board
+          - const: kontron,imx8mp-osm-s     # Kontron i.MX8MP OSM-S SoM
+          - const: fsl,imx8mp
+
+      - description: Kontron i.MX8MP SMARC based Boards
+        items:
+          - const: kontron,imx8mp-smarc-eval-carrier  # Kontron i.MX8MP SMARC Eval Carrier
+          - const: kontron,imx8mp-smarc               # Kontron i.MX8MP SMARC Module
+          - const: kontron,imx8mp-osm-s               # Kontron i.MX8MP OSM-S SoM
+          - const: fsl,imx8mp
+
+      - description: PHYTEC phyCORE-i.MX8MP FPSC based boards
+        items:
+          - enum:
+              - phytec,imx8mp-libra-rdk-fpsc  # i.MX 8M Plus Libra RDK
+          - const: phytec,imx8mp-phycore-fpsc # phyCORE-i.MX 8M Plus FPSC
           - const: fsl,imx8mp
 
       - description: PHYTEC phyCORE-i.MX8MP SoM based boards
@@ -781,6 +1190,87 @@ properties:
           - const: phytec,imx8mp-phycore-som         # phyCORE-i.MX8MP SoM
           - const: fsl,imx8mp
 
+      - description: Polyhex DEBIX i.MX8MP based SBCs
+        items:
+          - enum:
+              - polyhex,imx8mp-debix-model-a        # Polyhex Debix Model A Board
+          - const: polyhex,imx8mp-debix             # Polyhex i.MX8MP Debix SBCs
+          - const: fsl,imx8mp
+
+      - description: Polyhex DEBIX i.MX8MP SOM A based boards
+        items:
+          - enum:
+              - polyhex,imx8mp-debix-som-a-bmb-08   # Polyhex Debix SOM A on SOM A I/O board
+          - const: polyhex,imx8mp-debix-som-a       # Polyhex Debix SOM A
+          - const: fsl,imx8mp
+
+      - description: SolidRun i.MX8MP SoM based boards
+        items:
+          - enum:
+              - solidrun,imx8mp-cubox-m             # SolidRun i.MX8MP SoM on CuBox-M
+              - solidrun,imx8mp-hummingboard-mate   # SolidRun i.MX8MP SoM on HummingBoard Mate
+              - solidrun,imx8mp-hummingboard-pro    # SolidRun i.MX8MP SoM on HummingBoard Pro
+              - solidrun,imx8mp-hummingboard-pulse  # SolidRun i.MX8MP SoM on HummingBoard Pulse
+              - solidrun,imx8mp-hummingboard-ripple # SolidRun i.MX8MP SoM on HummingBoard Ripple
+          - const: solidrun,imx8mp-sr-som
+          - const: fsl,imx8mp
+
+      - description: TechNexion EDM-G-IMX8M-PLUS SoM based boards
+        items:
+          - enum:
+              - technexion,edm-g-imx8mp-wb          # TechNexion EDM-G-IMX8MP SOM on WB-EDM-G
+          - const: technexion,edm-g-imx8mp          # TechNexion EDM-G-IMX8MP SOM
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with SMARC iMX8M Plus Modules
+        items:
+          - const: toradex,smarc-imx8mp-dev # Toradex SMARC iMX8M Plus on Toradex SMARC Development Board
+          - const: toradex,smarc-imx8mp     # Toradex SMARC iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+              - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+              - toradex,verdin-imx8mp-nonwifi-ivy    # Verdin iMX8M Plus Module on Ivy
+              - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow
+              - toradex,verdin-imx8mp-nonwifi-yavia  # Verdin iMX8M Plus Module on Yavia
+          - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mp-wifi-ivy    # Verdin iMX8M Plus Wi-Fi / BT Module on Ivy
+              - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow
+              - toradex,verdin-imx8mp-wifi-yavia  # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description:
+          TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All CPU variants use the same device tree hence only one compatible
+          is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+          version as an industrial computing device.
+        items:
+          - enum:
+              - tq,imx8mp-tqma8mpql-mba8mpxl      # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+              - tq,imx8mp-tqma8mpql-mba8mp-ras314 # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MP-RAS314
+          - const: tq,imx8mp-tqma8mpql            # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+          - const: fsl,imx8mp
+
+      - description: Variscite VAR-SOM-MX8M Plus based boards
+        items:
+          - const: variscite,var-som-mx8mp-symphony
+          - const: variscite,var-som-mx8mp
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -790,12 +1280,17 @@ properties:
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
               - google,imx8mq-phanbell    # Google Coral Edge TPU
               - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
-              - mntre,reform2             # MNT Reform2 Laptop
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
           - const: fsl,imx8mq
 
+      - description: i.MX8MQ NITROGEN SoM based Boards
+        items:
+          - const: mntre,reform2                  # MNT Reform2 Laptop
+          - const: boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
+          - const: fsl,imx8mq
+
       - description: Purism Librem5 phones
         items:
           - enum:
@@ -805,6 +1300,15 @@ properties:
           - const: purism,librem5
           - const: fsl,imx8mq
 
+      - description:
+          TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip
+          variants. It is designed to be clicked on different carrier boards.
+        items:
+          - enum:
+              - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx
+          - const: tq,imx8mq-tqma8mq     # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM
+          - const: fsl,imx8mq
+
       - description: Zodiac Inflight Innovations Ultra Boards
         items:
           - enum:
@@ -817,6 +1321,26 @@ properties:
         items:
           - enum:
               - fsl,imx8qm-mek           # i.MX8QM MEK Board
+              - fsl,imx8qm-mek-revd      # i.MX8QM MEK Rev D Board
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+              - toradex,apalis-imx8-eval-v1.2       # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
+              - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
+          - const: toradex,apalis-imx8
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+              - toradex,apalis-imx8-v1.1-eval-v1.2  # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
+          - const: toradex,apalis-imx8-v1.1
           - const: fsl,imx8qm
 
       - description: i.MX8QXP based Boards
@@ -824,22 +1348,203 @@ properties:
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
-              - toradex,colibri-imx8x     # Colibri iMX8X Modules
+              - fsl,imx8qxp-mek-wcpu      # i.MX8QXP MEK WCPU Board
           - const: fsl,imx8qxp
 
-      - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
+      - description: i.MX8QXP/i.MX8DX Boards with Toradex Colibri iMX8X Modules
         items:
           - enum:
+              - toradex,colibri-imx8x-aster   # Colibri iMX8X Module on Aster Board
               - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx8x-iris    # Colibri iMX8X Module on Iris Board
+              - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2
           - const: toradex,colibri-imx8x
-          - const: fsl,imx8qxp
+          - enum:
+              - fsl,imx8qxp
+              - fsl,imx8dx
+
+      - description:
+          TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It is designed to be clicked on different carrier boards
+          MBa8Xx is the starterkit
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdp-mba8xx # TQ-Systems GmbH TQMa8XDP SOM on MBa8Xx
+              - const: tq,imx8dxp-tqma8xdp     # TQ-Systems GmbH TQMa8XDP SOM (with i.MX8DXP)
+              - const: fsl,imx8dxp
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqp-mba8xx # TQ-Systems GmbH TQMa8XQP SOM on MBa8Xx
+              - const: tq,imx8qxp-tqma8xqp     # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP)
+              - const: fsl,imx8qxp
+
+      - description:
+          TQMa8XxS is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It has the SMARC-2.0 form factor and is designed to be placed on
+          different carrier boards. MB-SMARC-2 is a carrier reference design.
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqps-mb-smarc-2 # TQ-Systems GmbH TQMa8QXPS SOM on MB-SMARC-2
+              - const: tq,imx8qxp-tqma8xqps         # TQ-Systems GmbH TQMa8QXPS SOM
+              - const: fsl,imx8qxp
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdps-mb-smarc-2 # TQ-Systems GmbH TQMa8XDPS SOM on MB-SMARC-2
+              - const: tq,imx8dxp-tqma8xdps         # TQ-Systems GmbH TQMa8XDPS SOM
+              - const: fsl,imx8dxp
+
+      - description: i.MX8ULP based Boards
+        items:
+          - enum:
+              - fsl,imx8ulp-9x9-evk       # i.MX8ULP EVK9 Board
+              - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
+          - const: fsl,imx8ulp
+
+      - description: i.MX91 based Boards
+        items:
+          - enum:
+              - fsl,imx91-11x11-evk       # i.MX91 11x11 EVK Board
+          - const: fsl,imx91
+
+      - description: i.MX93 based Boards
+        items:
+          - enum:
+              - fsl,imx93-9x9-qsb         # i.MX93 9x9 QSB Board
+              - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+              - fsl,imx93-14x14-evk       # i.MX93 14x14 EVK Board
+          - const: fsl,imx93
+
+      - description: i.MX94 based Boards
+        items:
+          - enum:
+              - fsl,imx943-evk            # i.MX943 EVK Board
+          - const: fsl,imx94
+
+      - description: i.MX95 based Boards
+        items:
+          - enum:
+              - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
+              - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
+              - toradex,verdin-imx95-19x19-evk  # i.MX95 Verdin Evaluation Kit (EVK)
+          - const: fsl,imx95
+
+      - description: PHYTEC i.MX 95 FPSC based Boards
+        items:
+          - enum:
+              - phytec,imx95-libra-rdk-fpsc   # Libra-i.MX 95 FPSC
+          - const: phytec,imx95-phycore-fpsc  # phyCORE-i.MX 95 FPSC
+          - const: fsl,imx95
+
+      - description: Toradex Boards with SMARC iMX95 Modules
+        items:
+          - const: toradex,smarc-imx95-dev # Toradex SMARC iMX95 on Toradex SMARC Development Board
+          - const: toradex,smarc-imx95     # Toradex SMARC iMX95 Module
+          - const: fsl,imx95
+
+      - description: i.MXRT1050 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1050-evk         # i.MXRT1050 EVK Board
+          - const: fsl,imxrt1050
+
+      - description: i.MXRT1170 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1170-evk         # i.MXRT1170 EVK Board
+          - const: fsl,imxrt1170
+
+      - description:
+          TQMa91xxLA and TQMa91xxCA are two series of feature compatible SOM
+          using NXP i.MX91 SOC in 11x11 mm package.
+          TQMa91xxLA is designed to be soldered on different carrier boards.
+          TQMa91xxCA is a compatible variant using board to board connectors.
+          All SOM and CPU variants use the same device tree hence only one
+          compatible is needed. Bootloader disables all features not present
+          in the assembled SOC.
+          MBa91xxCA mainboard can be used as starterkit for the SOM
+          soldered on an adapter board or for the connector variant
+          MBa91xxLA mainboard is a single board computer using the solderable
+          SOM variant
+        items:
+          - enum:
+              - tq,imx91-tqma9131-mba91xxca # TQ-Systems GmbH i.MX91 TQMa91xxCA/LA SOM on MBa91xxCA
+          - const: tq,imx91-tqma9131        # TQ-Systems GmbH i.MX91 TQMa91xxCA/LA SOM
+          - const: fsl,imx91
+
+      - description:
+          TQMa93xxLA and TQMa93xxCA are two series of feature compatible SOM
+          using NXP i.MX93 SOC in 11x11 mm package.
+          TQMa93xxLA is designed to be soldered on different carrier boards.
+          TQMa93xxCA is a compatible variant using board to board connectors.
+          All SOM and CPU variants use the same device tree hence only one
+          compatible is needed. Bootloader disables all features not present
+          in the assembled SOC.
+          MBa91xxCA mainboard can be used as starterkit for the SOM
+          soldered on an adapter board or for the connector variant
+          to evaluate RGB display support.
+          MBa93xxCA mainboard can be used as starterkit for the SOM
+          soldered on an adapter board or for the connector variant
+          MBa93xxLA mainboard is a single board computer using the solderable
+          SOM variant
+        items:
+          - enum:
+              - tq,imx93-tqma9352-mba91xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa91xxCA
+              - tq,imx93-tqma9352-mba93xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa93xxCA
+              - tq,imx93-tqma9352-mba93xxla # TQ-Systems GmbH i.MX93 TQMa93xxLA SOM on MBa93xxLA SBC
+          - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
+          - const: fsl,imx93
+
+      - description: PHYTEC phyCORE-i.MX91 SoM based boards
+        items:
+          - enum:
+              - phytec,imx91-phyboard-segin # phyBOARD-Segin with i.MX91
+          - const: phytec,imx91-phycore-som # phyCORE-i.MX91 SoM
+          - const: fsl,imx91
+
+      - description: PHYTEC phyCORE-i.MX93 SoM based boards
+        items:
+          - enum:
+              - phytec,imx93-phyboard-nash  # phyBOARD-Nash-i.MX93
+              - phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
+          - const: phytec,imx93-phycore-som # phyCORE-i.MX93 SoM
+          - const: fsl,imx93
+
+      - description: Variscite VAR-SOM-MX93 based boards
+        items:
+          - const: variscite,var-som-mx93-symphony
+          - const: variscite,var-som-mx93
+          - const: fsl,imx93
+
+      - description: Kontron OSM-S i.MX93 SoM based boards
+        items:
+          - const: kontron,imx93-bl-osm-s # Kontron BL i.MX93 OSM-S board
+          - const: kontron,imx93-osm-s    # Kontron OSM-S i.MX93 SoM
+          - const: fsl,imx93
+
+      - description:
+          TQMa95xxSA is a series of SOM featuring NXP i.MX95 SoC variants.
+          It has the SMARC form factor and is designed to be placed on
+          different carrier boards. MB-SMARC-2 is a carrier reference design.
+        items:
+          - enum:
+              - tq,imx95-tqma9596sa-mb-smarc-2 # TQ-Systems GmbH i.MX95 TQMa95xxSA SOM on MB-SMARC-2
+          - const: tq,imx95-tqma9596sa         # TQ-Systems GmbH i.MX95 TQMa95xxSA SOM
+          - const: fsl,imx95
 
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
-          For the Vybrid SoC familiy all variants with DDR controller are supported,
+          For the Vybrid SoC family all variants with DDR controller are supported,
           which is the VF5xx and VF6xx series. Out of historical reasons, in most
-          places the kernel uses vf610 to refer to the whole familiy.
+          places the kernel uses vf610 to refer to the whole family.
           The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
           core support.
         items:
@@ -862,7 +1567,6 @@ properties:
               - fsl,vf610-twr             # VF610 Tower Board
               - lwn,bk4                   # Liebherr BK4 controller
               - phytec,vf610-cosmic       # PHYTEC Cosmic/Cosmic+ Board
-              - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
           - const: fsl,vf610
 
       - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
@@ -894,15 +1598,32 @@ properties:
               - fsl,ls1012a-qds
           - const: fsl,ls1012a
 
+      - description: TQ Systems TQMLS12AL SoM on MBLS1012AL board
+        items:
+          - const: tq,ls1012a-tqmls1012al-mbls1012al
+          - const: tq,ls1012a-tqmls1012al
+          - const: fsl,ls1012a
+
       - description: LS1021A based Boards
         items:
           - enum:
+              - fsl,ls1021a-iot
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
               - fsl,ls1021a-tsn
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
+      - description:
+          TQ-Systems TQMLS102xA is a series of socketable SOM featuring
+          LS102x system-on-chip variants. MBLS102xA mainboard can be used as
+          starterkit.
+        items:
+          - enum:
+              - tq,ls1021a-tqmls1021a-mbls102xa
+          - const: tq,ls1021a-tqmls1021a
+          - const: fsl,ls1021a
+
       - description: LS1028A based Boards
         items:
           - enum:
@@ -958,6 +1679,13 @@ properties:
               - fsl,ls1043a-qds
           - const: fsl,ls1043a
 
+      - description: TQ-Systems LS1043A based Boards
+        items:
+          - enum:
+              - tq,ls1043a-tqmls1043a-mbls10xxa
+          - const: tq,ls1043a-tqmls1043a
+          - const: fsl,ls1043a
+
       - description: LS1046A based Boards
         items:
           - enum:
@@ -966,6 +1694,13 @@ properties:
               - fsl,ls1046a-rdb
           - const: fsl,ls1046a
 
+      - description: TQ-Systems LS1046A based Boards
+        items:
+          - enum:
+              - tq,ls1046a-tqmls1046a-mbls10xxa
+          - const: tq,ls1046a-tqmls1046a
+          - const: fsl,ls1046a
+
       - description: LS1088A based Boards
         items:
           - enum:
@@ -973,6 +1708,13 @@ properties:
               - fsl,ls1088a-rdb
           - const: fsl,ls1088a
 
+      - description: TQ-Systems LS1088A based Boards
+        items:
+          - enum:
+              - tq,ls1088a-tqmls1088a-mbls10xxa
+          - const: tq,ls1088a-tqmls1088a
+          - const: fsl,ls1088a
+
       - description: LS2080A based Boards
         items:
           - enum:
@@ -981,6 +1723,12 @@ properties:
               - fsl,ls2080a-rdb
           - const: fsl,ls2080a
 
+      - description: LS2081A based Boards
+        items:
+          - enum:
+              - fsl,ls2081a-rdb
+          - const: fsl,ls2081a
+
       - description: LS2088A based Boards
         items:
           - enum:
@@ -998,7 +1746,7 @@ properties:
               - fsl,lx2162a-qds
           - const: fsl,lx2160a
 
-      - description: SolidRun LX2160A based Boards
+      - description: SolidRun LX2160A CEX-7 based Boards
         items:
           - enum:
               - solidrun,clearfog-cx
@@ -1006,6 +1754,23 @@ properties:
           - const: solidrun,lx2160a-cex7
           - const: fsl,lx2160a
 
+      - description: SolidRun LX2162A SoM based Boards
+        items:
+          - enum:
+              - solidrun,lx2162a-clearfog
+          - const: solidrun,lx2162a-som
+          - const: fsl,lx2160a
+
+      - description:
+          TQ-Systems TQMLX2160A is a series of socketable SOM featuring
+          LX2160A system-on-chip variants. MBLX2160A mainboard can be used a
+          starterkit.
+        items:
+          - enum:
+              - tq,lx2160a-tqmlx2160a-mblx2160a
+          - const: tq,lx2160a-tqmlx2160a
+          - const: fsl,lx2160a
+
       - description: S32G2 based Boards
         items:
           - enum:
@@ -1013,6 +1778,12 @@ properties:
               - nxp,s32g274a-rdb2
           - const: nxp,s32g2
 
+      - description: S32G3 based Boards
+        items:
+          - enum:
+              - nxp,s32g399a-rdb3
+          - const: nxp,s32g3
+
       - description: S32V234 based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
deleted file mode 100644
index fd54e1db2156..000000000000
--- a/Documentation/devicetree/bindings/arm/fw-cfg.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* QEMU Firmware Configuration bindings for ARM
-
-QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
-provide the following Firmware Configuration interface on the "virt" machine
-type:
-
-- A write-only, 16-bit wide selector (or control) register,
-- a read-write, 64-bit wide data register.
-
-QEMU exposes the control and data register to ARM guests as memory mapped
-registers; their location is communicated to the guest's UEFI firmware in the
-DTB that QEMU places at the bottom of the guest's DRAM.
-
-The authoritative guest-side hardware interface documentation to the fw_cfg
-device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
-
-
-Required properties:
-
-- compatible: "qemu,fw-cfg-mmio".
-
-- reg: the MMIO region used by the device.
-  * Bytes 0x0 to 0x7 cover the data register.
-  * Bytes 0x8 to 0x9 cover the selector register.
-  * Further registers may be appended to the region in case of future interface
-    revisions / feature bits.
-
-Example:
-
-/ {
-	#size-cells = <0x2>;
-	#address-cells = <0x2>;
-
-	fw-cfg@9020000 {
-		compatible = "qemu,fw-cfg-mmio";
-		reg = <0x0 0x9020000 0x0 0xa>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml
new file mode 100644
index 000000000000..99961e5282e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/google.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/google.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Tensor platforms
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel
+  devices.
+
+  Currently upstream this is devices using "gs101" SoC which is found in Pixel
+  6, Pixel 6 Pro and Pixel 6a.
+
+  Google have a few different names for the SoC:
+  - Marketing name ("Tensor")
+  - Codename ("Whitechapel")
+  - SoC ID ("gs101")
+  - Die ID ("S5P9845")
+
+  Likewise there are a couple of names for the actual device
+  - Marketing name ("Pixel 6")
+  - Codename ("Oriole")
+
+  Devicetrees should use the lowercased SoC ID and lowercased board codename,
+  e.g. gs101 and gs101-oriole.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Google Pixel 6 or 6 Pro (Oriole or Raven)
+        items:
+          - enum:
+              - google,gs101-oriole
+              - google,gs101-raven
+          - const: google,gs101
+
+  # Bootloader requires empty ect node to be present
+  ect:
+    type: object
+    additionalProperties: false
+
+required:
+  - ect
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
index 528dad4cde3c..4fc208d3995e 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
@@ -29,6 +29,26 @@ properties:
 
   ranges: true
 
+patternProperties:
+  "^clock@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: hisilicon,hix5hd2-clock
+
+      reg:
+        maxItems: 1
+
+      "#clock-cells":
+        const: 1
+
+    required:
+      - compatible
+      - reg
+      - "#clock-cells"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
index 7378159e61df..483caf0ce25b 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -17,14 +17,15 @@ properties:
       - const: hisilicon,hip04-bootwrapper
 
   boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       Address and size of boot method.
       [0]: bootwrapper physical address
       [1]: bootwrapper size
       [2]: relocation physical address
       [3]: relocation size
-    minItems: 1
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
index 5a53d433b6f0..7a221e1c09df 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
@@ -82,6 +82,23 @@ properties:
 
   ranges: true
 
+patternProperties:
+  '^clock@':
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - hisilicon,hi3620-clock
+          - hisilicon,hi3620-mmc-clock
+
+      reg:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
index b38458022946..540876322040 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hisilicon Platforms Device Tree Bindings
+title: Hisilicon Platforms
 
 maintainers:
   - Wei Xu <xuwei5@hisilicon.com>
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 000000000000..224bbcb93f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: GXP Based Boards
+        items:
+          - enum:
+              - hpe,gxp-dl360gen10
+          - const: hpe,gxp
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml
deleted file mode 100644
index 52bce5dbb11f..000000000000
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ /dev/null
@@ -1,661 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/idle-states.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM idle states binding description
-
-maintainers:
-  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
-description: |+
-  ==========================================
-  1 - Introduction
-  ==========================================
-
-  ARM systems contain HW capable of managing power consumption dynamically,
-  where cores can be put in different low-power states (ranging from simple wfi
-  to power gating) according to OS PM policies. The CPU states representing the
-  range of dynamic idle states that a processor can enter at run-time, can be
-  specified through device tree bindings representing the parameters required to
-  enter/exit specific idle states on a given processor.
-
-  According to the Server Base System Architecture document (SBSA, [3]), the
-  power states an ARM CPU can be put into are identified by the following list:
-
-  - Running
-  - Idle_standby
-  - Idle_retention
-  - Sleep
-  - Off
-
-  The power states described in the SBSA document define the basic CPU states on
-  top of which ARM platforms implement power management schemes that allow an OS
-  PM implementation to put the processor in different idle states (which include
-  states listed above; "off" state is not an idle state since it does not have
-  wake-up capabilities, hence it is not considered in this document).
-
-  Idle state parameters (e.g. entry latency) are platform specific and need to
-  be characterized with bindings that provide the required information to OS PM
-  code so that it can build the required tables and use them at runtime.
-
-  The device tree binding definition for ARM idle states is the subject of this
-  document.
-
-  ===========================================
-  2 - idle-states definitions
-  ===========================================
-
-  Idle states are characterized for a specific system through a set of
-  timing and energy related properties, that underline the HW behaviour
-  triggered upon idle states entry and exit.
-
-  The following diagram depicts the CPU execution phases and related timing
-  properties required to enter and exit an idle state:
-
-  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
-              |          |           |          |          |
-
-              |<------ entry ------->|
-              |       latency        |
-                                                |<- exit ->|
-                                                |  latency |
-              |<-------- min-residency -------->|
-                         |<-------  wakeup-latency ------->|
-
-      Diagram 1: CPU idle state execution phases
-
-  EXEC:  Normal CPU execution.
-
-  PREP:  Preparation phase before committing the hardware to idle mode
-    like cache flushing. This is abortable on pending wake-up
-    event conditions. The abort latency is assumed to be negligible
-    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
-    goes back to EXEC. This phase is optional. If not abortable,
-    this should be included in the ENTRY phase instead.
-
-  ENTRY:  The hardware is committed to idle mode. This period must run
-    to completion up to IDLE before anything else can happen.
-
-  IDLE:  This is the actual energy-saving idle period. This may last
-    between 0 and infinite time, until a wake-up event occurs.
-
-  EXIT:  Period during which the CPU is brought back to operational
-    mode (EXEC).
-
-  entry-latency: Worst case latency required to enter the idle state. The
-  exit-latency may be guaranteed only after entry-latency has passed.
-
-  min-residency: Minimum period, including preparation and entry, for a given
-  idle state to be worthwhile energywise.
-
-  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
-  CPU being able to execute normal code again. If not specified, this is assumed
-  to be entry-latency + exit-latency.
-
-  These timing parameters can be used by an OS in different circumstances.
-
-  An idle CPU requires the expected min-residency time to select the most
-  appropriate idle state based on the expected expiry time of the next IRQ
-  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
-
-  An operating system scheduler may need to compute the shortest wake-up delay
-  for CPUs in the system by detecting how long will it take to get a CPU out
-  of an idle state, e.g.:
-
-  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
-
-  In other words, the scheduler can make its scheduling decision by selecting
-  (e.g. waking-up) the CPU with the shortest wake-up delay.
-  The wake-up delay must take into account the entry latency if that period
-  has not expired. The abortable nature of the PREP period can be ignored
-  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
-  the worst case since it depends on the CPU operating conditions, i.e. caches
-  state).
-
-  An OS has to reliably probe the wakeup-latency since some devices can enforce
-  latency constraint guarantees to work properly, so the OS has to detect the
-  worst case wake-up latency it can incur if a CPU is allowed to enter an
-  idle state, and possibly to prevent that to guarantee reliable device
-  functioning.
-
-  The min-residency time parameter deserves further explanation since it is
-  expressed in time units but must factor in energy consumption coefficients.
-
-  The energy consumption of a cpu when it enters a power state can be roughly
-  characterised by the following graph:
-
-                 |
-                 |
-                 |
-             e   |
-             n   |                                      /---
-             e   |                               /------
-             r   |                        /------
-             g   |                  /-----
-             y   |           /------
-                 |       ----
-                 |      /|
-                 |     / |
-                 |    /  |
-                 |   /   |
-                 |  /    |
-                 | /     |
-                 |/      |
-            -----|-------+----------------------------------
-                0|       1                              time(ms)
-
-      Graph 1: Energy vs time example
-
-  The graph is split in two parts delimited by time 1ms on the X-axis.
-  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
-  and denotes the energy costs incurred while entering and leaving the idle
-  state.
-  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
-  shallower slope and essentially represents the energy consumption of the idle
-  state.
-
-  min-residency is defined for a given idle state as the minimum expected
-  residency time for a state (inclusive of preparation and entry) after
-  which choosing that state become the most energy efficient option. A good
-  way to visualise this, is by taking the same graph above and comparing some
-  states energy consumptions plots.
-
-  For sake of simplicity, let's consider a system with two idle states IDLE1,
-  and IDLE2:
-
-            |
-            |
-            |
-            |                                                  /-- IDLE1
-         e  |                                              /---
-         n  |                                         /----
-         e  |                                     /---
-         r  |                                /-----/--------- IDLE2
-         g  |                    /-------/---------
-         y  |        ------------    /---|
-            |       /           /----    |
-            |      /        /---         |
-            |     /    /----             |
-            |    / /---                  |
-            |   ---                      |
-            |  /                         |
-            | /                          |
-            |/                           |                  time
-         ---/----------------------------+------------------------
-            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
-                                         |
-                                  IDLE2-min-residency
-
-      Graph 2: idle states min-residency example
-
-  In graph 2 above, that takes into account idle states entry/exit energy
-  costs, it is clear that if the idle state residency time (i.e. time till next
-  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
-  choice energywise.
-
-  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
-  than IDLE2.
-
-  However, the lower power consumption (i.e. shallower energy curve slope) of
-  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
-  efficient.
-
-  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
-  shallower states in a system with multiple idle states) is defined
-  IDLE2-min-residency and corresponds to the time when energy consumption of
-  IDLE1 and IDLE2 states breaks even.
-
-  The definitions provided in this section underpin the idle states
-  properties specification that is the subject of the following sections.
-
-  ===========================================
-  3 - idle-states node
-  ===========================================
-
-  ARM processor idle states are defined within the idle-states node, which is
-  a direct child of the cpus node [1] and provides a container where the
-  processor idle states, defined as device tree nodes, are listed.
-
-  On ARM systems, it is a container of processor idle states nodes. If the
-  system does not provide CPU power management capabilities, or the processor
-  just supports idle_standby, an idle-states node is not required.
-
-  ===========================================
-  4 - References
-  ===========================================
-
-  [1] ARM Linux Kernel documentation - CPUs bindings
-      Documentation/devicetree/bindings/arm/cpus.yaml
-
-  [2] ARM Linux Kernel documentation - PSCI bindings
-      Documentation/devicetree/bindings/arm/psci.yaml
-
-  [3] ARM Server Base System Architecture (SBSA)
-      http://infocenter.arm.com/help/index.jsp
-
-  [4] ARM Architecture Reference Manuals
-      http://infocenter.arm.com/help/index.jsp
-
-  [6] ARM Linux Kernel documentation - Booting AArch64 Linux
-      Documentation/arm64/booting.rst
-
-properties:
-  $nodename:
-    const: idle-states
-
-  entry-method:
-    description: |
-      Usage and definition depend on ARM architecture version.
-
-      On ARM v8 64-bit this property is required.
-      On ARM 32-bit systems this property is optional
-
-      This assumes that the "enable-method" property is set to "psci" in the cpu
-      node[6] that is responsible for setting up CPU idle management in the OS
-      implementation.
-    const: psci
-
-patternProperties:
-  "^(cpu|cluster)-":
-    type: object
-    description: |
-      Each state node represents an idle state description and must be defined
-      as follows.
-
-      The idle state entered by executing the wfi instruction (idle_standby
-      SBSA,[3][4]) is considered standard on all ARM platforms and therefore
-      must not be listed.
-
-      In addition to the properties listed above, a state node may require
-      additional properties specific to the entry-method defined in the
-      idle-states node. Please refer to the entry-method bindings
-      documentation for properties definitions.
-
-    properties:
-      compatible:
-        const: arm,idle-state
-
-      local-timer-stop:
-        description:
-          If present the CPU local timer control logic is
-             lost on state entry, otherwise it is retained.
-        type: boolean
-
-      entry-latency-us:
-        description:
-          Worst case latency in microseconds required to enter the idle state.
-
-      exit-latency-us:
-        description:
-          Worst case latency in microseconds required to exit the idle state.
-          The exit-latency-us duration may be guaranteed only after
-          entry-latency-us has passed.
-
-      min-residency-us:
-        description:
-          Minimum residency duration in microseconds, inclusive of preparation
-          and entry, for this idle state to be considered worthwhile energy wise
-          (refer to section 2 of this document for a complete description).
-
-      wakeup-latency-us:
-        description: |
-          Maximum delay between the signaling of a wake-up event and the CPU
-          being able to execute normal code again. If omitted, this is assumed
-          to be equal to:
-
-            entry-latency-us + exit-latency-us
-
-          It is important to supply this value on systems where the duration of
-          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
-          systems entry-latency-us + exit-latency-us will exceed
-          wakeup-latency-us by this duration.
-
-      idle-state-name:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          A string used as a descriptive name for the idle state.
-
-    required:
-      - compatible
-      - entry-latency-us
-      - exit-latency-us
-      - min-residency-us
-
-additionalProperties: false
-
-examples:
-  - |
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <2>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100000000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        idle-states {
-            entry-method = "psci";
-
-            CPU_RETENTION_0_0: cpu-retention-0-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <80>;
-            };
-
-            CLUSTER_RETENTION_0: cluster-retention-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <250>;
-                wakeup-latency-us = <130>;
-            };
-
-            CPU_SLEEP_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <250>;
-                exit-latency-us = <500>;
-                min-residency-us = <950>;
-            };
-
-            CLUSTER_SLEEP_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <600>;
-                exit-latency-us = <1100>;
-                min-residency-us = <2700>;
-                wakeup-latency-us = <1500>;
-            };
-
-            CPU_RETENTION_1_0: cpu-retention-1-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <90>;
-            };
-
-            CLUSTER_RETENTION_1: cluster-retention-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <270>;
-                wakeup-latency-us = <100>;
-            };
-
-            CPU_SLEEP_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <70>;
-                exit-latency-us = <100>;
-                min-residency-us = <300>;
-                wakeup-latency-us = <150>;
-            };
-
-            CLUSTER_SLEEP_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <500>;
-                exit-latency-us = <1200>;
-                min-residency-us = <3500>;
-                wakeup-latency-us = <1300>;
-            };
-        };
-    };
-
-  - |
-    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <1>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x0>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x1>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@2 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x2>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@3 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x3>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x100>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x101>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@102 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x102>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@103 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x103>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        idle-states {
-            cpu_sleep_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <200>;
-                exit-latency-us = <100>;
-                min-residency-us = <400>;
-                wakeup-latency-us = <250>;
-            };
-
-            cluster_sleep_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <500>;
-                exit-latency-us = <1500>;
-                min-residency-us = <2500>;
-                wakeup-latency-us = <1700>;
-            };
-
-            cpu_sleep_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <300>;
-                exit-latency-us = <500>;
-                min-residency-us = <900>;
-                wakeup-latency-us = <600>;
-            };
-
-            cluster_sleep_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <800>;
-                exit-latency-us = <2000>;
-                min-residency-us = <6500>;
-                wakeup-latency-us = <2300>;
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
index 107e686ab207..53d2ce02b207 100644
--- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Keem Bay platform device tree bindings
+title: Keem Bay platform
 
 maintainers:
   - Paul J. Murphy <paul.j.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
new file mode 100644
index 000000000000..c918837bd41c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: AgileX boards
+        items:
+          - enum:
+              - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
+              - intel,socfpga-agilex-socdk
+          - const: intel,socfpga-agilex
+      - description: Agilex3 boards
+        items:
+          - enum:
+              - intel,socfpga-agilex3-socdk
+          - const: intel,socfpga-agilex3
+          - const: intel,socfpga-agilex5
+      - description: Agilex5 boards
+        items:
+          - enum:
+              - intel,socfpga-agilex5-socdk
+              - intel,socfpga-agilex5-socdk-013b
+              - intel,socfpga-agilex5-socdk-nand
+          - const: intel,socfpga-agilex5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index 230bffeec0e5..b7b430896596 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel IXP4xx Device Tree Bindings
+title: Intel IXP4xx
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -16,12 +16,30 @@ properties:
     oneOf:
       - items:
           - enum:
+              - actiontec,mi424wr-ac
+              - actiontec,mi424wr-d
+              - adieng,coyote
+              - arcom,vulcan
+              - dlink,dsm-g600-a
+              - freecom,fsg-3
+              - gateway,7001
+              - gateworks,gw2348
+              - goramo,multilink-router
+              - intel,ixdp425
+              - intel,ixdpg425
+              - iom,nas-100d
               - linksys,nslu2
+              - netgear,wg302v1
+              - netgear,wg302v2
+              - usr,8200
               - welltech,epbx100
+              - linksys,wrv54g
+              - gemtek,gtwx5715
           - const: intel,ixp42x
       - items:
           - enum:
               - gateworks,gw2358
+              - intel,kixrp435
           - const: intel,ixp43x
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
deleted file mode 100644
index f310bad04483..000000000000
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-TI Keystone Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the
-following properties.
-
-Required properties:
- - compatible: All TI specific devices present in Keystone SOC should be in
-   the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
-   type UART should use the specified compatible for those devices.
-
-SoC families:
-
-- Keystone 2 generic SoC:
-   compatible = "ti,keystone"
-
-SoCs:
-
-- Keystone 2 Hawking/Kepler
-   compatible = "ti,k2hk", "ti,keystone"
-- Keystone 2 Lamarr
-   compatible = "ti,k2l", "ti,keystone"
-- Keystone 2 Edison
-   compatible = "ti,k2e", "ti,keystone"
-- K2G
-   compatible = "ti,k2g", "ti,keystone"
-
-Boards:
--  Keystone 2 Hawking/Kepler EVM
-   compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
-
--  Keystone 2 Lamarr EVM
-   compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
-
--  Keystone 2 Edison EVM
-   compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"
-
--  K2G EVM
-   compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone"
-
--  K2G Industrial Communication Engine EVM
-   compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone"
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
index 5cbcacaeb441..4a323e8c785d 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -1,10 +1,10 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common K3 TI-SCI bindings
+title: Common K3 TI-SCI
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 34f5f877d444..25a2b42105e5 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -1,10 +1,10 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI controller device node bindings
+title: TI-SCI controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
@@ -20,7 +20,7 @@ description: |
   initialized early into boot process and provides services to Operating Systems
   on multiple processors including ones running Linux.
 
-  See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
+  See https://software-dl.ti.com/tisci/esd/latest/index.html for protocol definition.
 
   The TI-SCI node describes the Texas Instrument's System Controller entity node.
   This parent node may optionally have additional children nodes which describe
@@ -61,10 +61,6 @@ properties:
   mboxes:
     minItems: 2
 
-  ti,system-reboot-controller:
-    description: Determines If system reboot can be triggered by SoC reboot
-    type: boolean
-
   ti,host-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
@@ -94,10 +90,9 @@ examples:
   - |
     pmmc: system-controller@2921800 {
       compatible = "ti,k2g-sci";
-      ti,system-reboot-controller;
       mbox-names = "rx", "tx";
-      mboxes= <&msgmgr 5 2>,
-              <&msgmgr 0 0>;
+      mboxes = <&msgmgr 5 2>,
+               <&msgmgr 0 0>;
       reg-names = "debug_messages";
       reg = <0x02921800 0x800>;
     };
@@ -107,8 +102,8 @@ examples:
       compatible = "ti,k2g-sci";
       ti,host-id = <12>;
       mbox-names = "rx", "tx";
-      mboxes= <&secure_proxy_main 11>,
-              <&secure_proxy_main 13>;
+      mboxes = <&secure_proxy_main 11>,
+               <&secure_proxy_main 13>;
       reg-names = "debug_messages";
       reg = <0x44083000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/arm/lge.yaml b/Documentation/devicetree/bindings/arm/lge.yaml
new file mode 100644
index 000000000000..d983ef7fcbd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lge.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/lge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG Electronics SoC Platforms
+
+maintainers:
+  - Chanho Min <chanho.min@lge.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with LG1312 Soc
+        items:
+          - const: lge,lg1312-ref
+          - const: lge,lg1312
+
+      - description: Boards with LG1313 SoC
+        items:
+          - const: lge,lg1313-ref
+          - const: lge,lg1313
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
new file mode 100644
index 000000000000..c7c5eb48fc7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU virt machine
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: linux,dummy-virt
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.yaml b/Documentation/devicetree/bindings/arm/marvell,berlin.yaml
new file mode 100644
index 000000000000..4e8442980dcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell,berlin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics/Marvell Berlin SoC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+  According to https://www.synaptics.com/company/news/conexant-marvell
+  Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+  Berlin SoCs are now Synaptics' SoCs.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sony,nsz-gs7
+          - const: marvell,berlin2
+          - const: marvell,berlin
+      - items:
+          - enum:
+              - google,chromecast
+              - valve,steamlink
+          - const: marvell,berlin2cd
+          - const: marvell,berlin
+      - items:
+          - enum:
+              - marvell,berlin2q-dmp
+          - const: marvell,berlin2q
+          - const: marvell,berlin
+      - items:
+          - enum:
+              - marvell,berlin4ct-dmp
+              - marvell,berlin4ct-stb
+          - const: marvell,berlin4ct
+          - const: marvell,berlin
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
deleted file mode 100644
index 64e8c73fc5ab..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
-----------------------------------------------------------------------
-
-Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx3236"
-
-In addition, boards using the Marvell 98DX3336 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx3336"
-
-In addition, boards using the Marvell 98DX4251 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp-98dx4251"
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
deleted file mode 100644
index 052a967c1f28..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ /dev/null
@@ -1,185 +0,0 @@
-Marvell Armada AP80x System Controller
-======================================
-
-The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
-7K/8K/931x SoCs. It contains system controllers, which provide several
-registers giving access to numerous features: clocks, pin-muxing and
-many other SoC configuration items. This DT binding allows to describe
-these system controllers.
-
-For the top level node:
- - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the AP80x system controller
-
-SYSTEM CONTROLLER 0
-===================
-
-Clocks:
--------
-
-
-The Device Tree node representing the AP806/AP807 system controller
-provides a number of clocks:
-
- - 0: reference clock of CPU cluster 0
- - 1: reference clock of CPU cluster 1
- - 2: fixed PLL at 1200 Mhz
- - 3: MSS clock, derived from the fixed PLL
-
-Required properties:
-
- - compatible: must be one of:
-   * "marvell,ap806-clock"
-   * "marvell,ap807-clock"
- - #clock-cells: must be set to 1
-
-Pinctrl:
---------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
-
-Required properties:
-- compatible must be "marvell,ap806-pinctrl",
-
-Available mpp pins/groups and functions:
-Note: brackets (x) are not part of the mpp name for marvell,function and given
-only for more detailed description in this document.
-
-name	pins	functions
-================================================================================
-mpp0	0	gpio, sdio(clk), spi0(clk)
-mpp1	1	gpio, sdio(cmd), spi0(miso)
-mpp2	2	gpio, sdio(d0), spi0(mosi)
-mpp3	3	gpio, sdio(d1), spi0(cs0n)
-mpp4	4	gpio, sdio(d2), i2c0(sda)
-mpp5	5	gpio, sdio(d3), i2c0(sdk)
-mpp6	6	gpio, sdio(ds)
-mpp7	7	gpio, sdio(d4), uart1(rxd)
-mpp8	8	gpio, sdio(d5), uart1(txd)
-mpp9	9	gpio, sdio(d6), spi0(cs1n)
-mpp10	10	gpio, sdio(d7)
-mpp11	11	gpio, uart0(txd)
-mpp12	12	gpio, sdio(pw_off), sdio(hw_rst)
-mpp13	13	gpio
-mpp14	14	gpio
-mpp15	15	gpio
-mpp16	16	gpio
-mpp17	17	gpio
-mpp18	18	gpio
-mpp19	19	gpio, uart0(rxd), sdio(pw_off)
-
-GPIO:
------
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
-
-Required properties:
-
-- compatible: "marvell,armada-8k-gpio"
-
-- offset: offset address inside the syscon block
-
-Optional properties:
-
-- marvell,pwm-offset: offset address of PWM duration control registers inside
-  the syscon block
-
-Example:
-ap_syscon: system-controller@6f4000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x6f4000 0x1000>;
-
-	ap_clk: clock {
-		compatible = "marvell,ap806-clock";
-		#clock-cells = <1>;
-	};
-
-	ap_pinctrl: pinctrl {
-		compatible = "marvell,ap806-pinctrl";
-	};
-
-	ap_gpio: gpio {
-		compatible = "marvell,armada-8k-gpio";
-		offset = <0x1040>;
-		ngpios = <19>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&ap_pinctrl 0 0 19>;
-		marvell,pwm-offset = <0x10c0>;
-		#pwm-cells = <2>;
-		clocks = <&ap_clk 3>;
-	};
-};
-
-SYSTEM CONTROLLER 1
-===================
-
-Thermal:
---------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-Required properties:
-- compatible: must be one of:
-  * marvell,armada-ap806-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts: overheat interrupt handle. Should point to line 18 of the
-  SEI irqchip. See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
-  to this IP and represents the channel ID. There is one sensor per
-  channel. O refers to the thermal IP internal channel, while positive
-  IDs refer to each CPU.
-
-Example:
-ap_syscon1: system-controller@6f8000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x6f8000 0x1000>;
-
-	ap_thermal: thermal-sensor@80 {
-		compatible = "marvell,armada-ap806-thermal";
-		reg = <0x80 0x10>;
-		interrupt-parent = <&sei>;
-		interrupts = <18>;
-		#thermal-sensor-cells = <1>;
-	};
-};
-
-Cluster clocks:
----------------
-
-Device Tree Clock bindings for cluster clock of Marvell
-AP806/AP807. Each cluster contain up to 2 CPUs running at the same
-frequency.
-
-Required properties:
- - compatible: must be one of:
-   * "marvell,ap806-cpu-clock"
-   * "marvell,ap807-cpu-clock"
-- #clock-cells : should be set to 1.
-
-- clocks : shall be the input parent clock(s) phandle for the clock
-           (one per cluster)
-
-- reg: register range associated with the cluster clocks
-
-ap_syscon1: system-controller@6f8000 {
-	compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
-	reg = <0x6f8000 0x1000>;
-
-	cpu_clk: clock-cpu@278 {
-		compatible = "marvell,ap806-cpu-clock";
-		clocks = <&ap_clk 0>, <&ap_clk 1>;
-		#clock-cells = <1>;
-		reg = <0x278 0xa30>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
deleted file mode 100644
index c6ed90ea6e17..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 370 and Armada XP families
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada-370-xp"
-
-In addition, boards using the Marvell Armada 370 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada370"
-
-In addition, boards using the Marvell Armada XP SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp"
-
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-375.txt b/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
deleted file mode 100644
index 867d0b80cb8f..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Marvell Armada 375 Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 375 family shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada375"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index f6d6642d81c0..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Marvell Armada 37xx Platforms Device Tree Bindings
---------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 37xx family must carry the
-following root node property:
-
- - compatible: must contain "marvell,armada3710"
-
-In addition, boards using the Marvell Armada 3720 SoC shall have the
-following property before the previous one:
-
- - compatible: must contain "marvell,armada3720"
-
-Example:
-
-compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
-
-
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg            : the register start and length for the North Bridge
-		    Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
-	compatible = "marvell,armada-3700-nb-pm", "syscon";
-	reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-avs", "syscon";
-- reg            : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
-	compatible = "marvell,armada-3700-avs", "syscon";
-	reg = <0x11500 0x40>;
-}
-
-
-CZ.NIC's Turris Mox SOHO router Device Tree Bindings
-----------------------------------------------------
-
-Required root node property:
-
- - compatible: must contain "cznic,turris-mox"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
new file mode 100644
index 000000000000..b2f4fe81b97c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx Platforms
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Armada 3720 SoC boards
+        items:
+          - enum:
+              - cznic,turris-mox
+              - glinet,gl-mv1000
+              - globalscale,espressobin
+              - marvell,armada-3720-db
+              - methode,edpu
+              - methode,udpu
+              - ripe,atlas-v5
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin boards
+        items:
+          - enum:
+              - globalscale,espressobin-emmc
+              - globalscale,espressobin-ultra
+              - globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin V7 boards
+        items:
+          - enum:
+              - globalscale,espressobin-v7-emmc
+          - const: globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
deleted file mode 100644
index 202953f1887e..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Armada 38x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 38x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada380"
-
-In addition, boards using the Marvell Armada 385 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada385"
-
-In addition, boards using the Marvell Armada 388 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada388"
-
-Example:
-
-compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
new file mode 100644
index 000000000000..cdf805b5db95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-38x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x Platforms
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description:
+          Netgear Armada 380 GS110EM Managed Switch.
+        items:
+          - const: netgear,gs110emx
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 385 Development Boards.
+        items:
+          - enum:
+              - marvell,a385-db-amc
+              - marvell,a385-db-ap
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 385 based single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-gtr-l8
+              - solidrun,clearfog-gtr-s4
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Kobol Armada 388 based Helios-4 NAS.
+        items:
+          - const: kobol,helios4
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 388 Development Boards.
+        items:
+          - enum:
+              - marvell,a388-gp
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 388 clearfog family single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-base-a1
+              - solidrun,clearfog-pro-a1
+          - const: solidrun,clearfog-a1
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
deleted file mode 100644
index 89468664f6ea..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Marvell Armada 39x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 39x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada390"
-
-In addition, boards using the Marvell Armada 395 SoC shall have the
-following property before the common "marvell,armada390" one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada395"
-
-Example:
-
-compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390";
-
-Boards using the Marvell Armada 398 SoC shall have the following
-property before the common "marvell,armada390" one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada398"
-
-Example:
-
-compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index e9bf3054529f..4bc7454a5d3a 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Armada 7K/8K Platforms Device Tree Bindings
+title: Marvell Armada 7K/8K Platforms
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
@@ -23,6 +23,9 @@ properties:
 
       - description: Armada 7040 SoC
         items:
+          - enum:
+              - globalscale,mochabin
+              - marvell,armada7040-db
           - const: marvell,armada7040
           - const: marvell,armada-ap806-quad
           - const: marvell,armada-ap806
@@ -35,10 +38,32 @@ properties:
 
       - description: Armada 8040 SoC
         items:
+          - enum:
+              - iei,puzzle-m801
+              - marvell,armada8040-db
+              - solidrun,clearfog-gt-8k
           - const: marvell,armada8040
           - const: marvell,armada-ap806-quad
           - const: marvell,armada-ap806
 
+      - description: Armada 8040 SoC MACCHIATOBin Boards
+        items:
+          - enum:
+              - marvell,armada8040-mcbin-doubleshot
+              - marvell,armada8040-mcbin-singleshot
+          - const: marvell,armada8040-mcbin
+          - const: marvell,armada8040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada 8080 SoC
+        items:
+          - enum:
+              - marvell,armada-8080-db
+          - const: marvell,armada-8080
+          - const: marvell,armada-ap810-octa
+          - const: marvell,armada-ap810
+
       - description: Armada CN9130 SoC with no external CP
         items:
           - const: marvell,cn9130
@@ -60,4 +85,44 @@ properties:
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
 
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9130 COM Express CPU module
+        items:
+          - const: marvell,cn9130-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9130-cpu-module
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description:
+          Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus
+          Armada CN9131 COM Express CPU module
+        items:
+          - const: marvell,cn9131-ac5x-carrier
+          - const: marvell,rd-ac5x-carrier
+          - const: marvell,cn9131-cpu-module
+          - const: marvell,cn9131
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description:
+          SolidRun CN9130 SoM based single-board computers
+        items:
+          - enum:
+              - solidrun,cn9130-clearfog-base
+              - solidrun,cn9130-clearfog-pro
+              - solidrun,cn9131-solidwan
+          - const: solidrun,cn9130-sr-som
+          - const: marvell,cn9130
+
+      - description:
+          SolidRun CN9132 COM-Express Type 7 based single-board computers
+        items:
+          - enum:
+              - solidrun,cn9132-clearfog
+          - const: solidrun,cn9132-sr-cex7
+          - const: marvell,cn9130
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
deleted file mode 100644
index f3e9624534c6..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Marvell Armada 8KPlus Platforms Device Tree Bindings
-----------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 8KP families must carry
-the following root node property:
-
- - compatible, with one of the following values:
-
-   - "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810"
-     when the SoC being used is the Armada 8080
-
-Example:
-
-compatible = "marvell,armada-8080-db", "marvell,armada-8080",
-	     "marvell,armada-ap810-octa", "marvell,armada-ap810"
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
deleted file mode 100644
index 0705e765f432..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ /dev/null
@@ -1,234 +0,0 @@
-Marvell Armada CP110 System Controller
-======================================
-
-The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains system controllers, which provide several registers
-giving access to numerous features: clocks, pin-muxing and many other
-SoC configuration items. This DT binding allows to describe these
-system controllers.
-
-For the top level node:
- - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller
-
-SYSTEM CONTROLLER 0
-===================
-
-Clocks:
--------
-
-The Device Tree node representing this System Controller 0 provides a
-number of clocks:
-
- - a set of core clocks
- - a set of gatable clocks
-
-Those clocks can be referenced by other Device Tree nodes using two
-cells:
- - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
-   gatable clocks.
- - The second cell identifies the particular core clock or gatable
-   clocks.
-
-The following clocks are available:
- - Core clocks
-   - 0 0	APLL
-   - 0 1	PPv2 core
-   - 0 2	EIP
-   - 0 3	Core
-   - 0 4	NAND core
-   - 0 5	SDIO core
- - Gatable clocks
-   - 1 0	Audio
-   - 1 1	Comm Unit
-   - 1 2	NAND
-   - 1 3	PPv2
-   - 1 4	SDIO
-   - 1 5	MG Domain
-   - 1 6	MG Core
-   - 1 7	XOR1
-   - 1 8	XOR0
-   - 1 9	GOP DP
-   - 1 11	PCIe x1 0
-   - 1 12	PCIe x1 1
-   - 1 13	PCIe x4
-   - 1 14	PCIe / XOR
-   - 1 15	SATA
-   - 1 16	SATA USB
-   - 1 17	Main
-   - 1 18	SD/MMC/GOP
-   - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
-   - 1 22	USB3H0
-   - 1 23	USB3H1
-   - 1 24	USB3 Device
-   - 1 25	EIP150
-   - 1 26	EIP197
-
-Required properties:
-
- - compatible: must be:
-     "marvell,cp110-clock"
- - #clock-cells: must be set to 2
-
-Pinctrl:
---------
-
-For common binding part and usage, refer to the file
-Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
-
-Required properties:
-
-- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
-  "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
-  depending on the specific variant of the SoC being used.
-
-Available mpp pins/groups and functions:
-Note: brackets (x) are not part of the mpp name for marvell,function and given
-only for more detailed description in this document.
-
-name	pins	functions
-================================================================================
-mpp0	0	gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
-mpp1	1	gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
-mpp2	2	gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
-mpp3	3	gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
-mpp4	4	gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
-mpp5	5	gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
-mpp6	6	gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
-mpp7	7	gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
-mpp8	8	gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
-mpp9	9	gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
-mpp10	10	gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
-mpp11	11	gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
-mpp12	12	gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
-mpp13	13	gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
-mpp14	14	gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
-mpp15	15	gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
-mpp16	16	gpio, dev(ad6), spi1(clk), mss_spi(clk)
-mpp17	17	gpio, dev(ad5), ge0(txd3)
-mpp18	18	gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
-mpp19	19	gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
-mpp20	20	gpio, dev(ad2), ge0(txd0)
-mpp21	21	gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
-mpp22	22	gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
-mpp23	23	gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
-mpp24	24	gpio, dev(a0), au(i2slrclk)
-mpp25	25	gpio, dev(oen), au(i2sdo_spdifo)
-mpp26	26	gpio, dev(wen0), au(i2sbclk)
-mpp27	27	gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
-mpp28	28	gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
-mpp29	29	gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
-mpp30	30	gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
-mpp31	31	gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
-mpp32	32	gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
-mpp33	33	gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
-mpp34	34	gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
-mpp35	35	gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
-mpp36	36	gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
-mpp37	37	gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
-mpp38	38	gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
-mpp39	39	gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
-mpp40	40	gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
-mpp41	41	gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
-mpp42	42	gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
-mpp43	43	gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
-mpp44	44	gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
-mpp45	45	gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
-mpp46	46	gpio, ge1(txd1), uart1(rts)
-mpp47	47	gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
-mpp48	48	gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
-mpp49	49	gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
-mpp50	50	gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
-mpp51	51	gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
-mpp52	52	gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
-mpp53	53	gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
-mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
-mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
-mpp56	56	gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
-mpp57	57	gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
-mpp58	58	gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
-mpp59	59	gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
-mpp60	60	gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
-mpp61	61	gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
-mpp62	62	gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
-
-GPIO:
------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
-
-Required properties:
-
-- compatible: "marvell,armada-8k-gpio"
-
-- offset: offset address inside the syscon block
-
-Example:
-
-CP110_LABEL(syscon0): system-controller@440000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x440000 0x1000>;
-
-	CP110_LABEL(clk): clock {
-		compatible = "marvell,cp110-clock";
-		#clock-cells = <2>;
-	};
-
-	CP110_LABEL(pinctrl): pinctrl {
-		compatible = "marvell,armada-8k-cpm-pinctrl";
-	};
-
-	CP110_LABEL(gpio1): gpio@100 {
-		compatible = "marvell,armada-8k-gpio";
-		offset = <0x100>;
-		ngpios = <32>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
-	};
-
-};
-
-SYSTEM CONTROLLER 1
-===================
-
-Thermal:
---------
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-Required properties:
-- compatible: must be one of:
-  * marvell,armada-cp110-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts-extended: overheat interrupt handle. Should point to
-  a line of the ICU-SEI irqchip (116 is what is usually used by the
-  firmware). The ICU-SEI will redirect towards interrupt line #37 of the
-  AP SEI which is shared across all CPs.
-  See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
-  to this IP and represents the channel ID. There is one sensor per
-  channel. O refers to the thermal IP internal channel.
-
-Example:
-CP110_LABEL(syscon1): system-controller@6f8000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x6f8000 0x1000>;
-
-	CP110_LABEL(thermal): thermal-sensor@70 {
-		compatible = "marvell,armada-cp110-thermal";
-		reg = <0x70 0x10>;
-		interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
-		#thermal-sensor-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
deleted file mode 100644
index 98cce9a653eb..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Kirkwood Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwood
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,kirkwood";
-
-In order to support the kirkwood cpufreq driver, there must be a node
-cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
-where the "powersave" clock is a gating clock used to switch the CPU
-between the "cpu_clk" and the "ddrclk".
-
-Example:
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-		      device_type = "cpu";
-		      compatible = "marvell,sheeva-88SV131";
-		      clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
-		      clock-names = "cpu_clk", "ddrclk", "powersave";
-		};
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
new file mode 100644
index 000000000000..8960fb8b2b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Alleycat5 (98DX25xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5
+          - const: marvell,ac5
+
+      - description: Alleycat5X (98DX35xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5x
+          - const: marvell,ac5x
+          - const: marvell,ac5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml
new file mode 100644
index 000000000000..e65eadfbd097
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada-370-xp.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada-370-xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370 and Armada XP platforms
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ctera,c200-v2
+              - dlink,dns327l
+              - globalscale,mirabox
+              - netgear,readynas-102
+              - netgear,readynas-104
+              - marvell,a370-db
+              - marvell,a370-rd
+              - seagate,dart-2
+              - seagate,dart-4
+              - seagate,cumulus-max
+              - seagate,cumulus
+              - synology,ds213j
+          - const: marvell,armada370
+          - const: marvell,armada-370-xp
+
+      - items:
+          - enum:
+              - mikrotik,crs305-1g-4s
+              - mikrotik,crs326-24g-2s
+              - mikrotik,crs328-4c-20s-4s
+          - const: marvell,armadaxp-98dx3236
+          - const: marvell,armada-370-xp
+
+      - items:
+          - const: marvell,db-xc3-24g4xg
+          - const: marvell,armadaxp-98dx3336
+          - const: marvell,armada-370-xp
+
+      - items:
+          - const: marvell,db-dxbc2
+          - const: marvell,armadaxp-98dx4251
+          - const: marvell,armada-370-xp
+
+      - items:
+          - enum:
+              - lenovo,ix4-300d
+              - linksys,mamba
+              - marvell,rd-axpwifiap
+              - netgear,readynas-2120
+              - synology,ds414
+          - const: marvell,armadaxp-mv78230
+          - const: marvell,armadaxp
+          - const: marvell,armada-370-xp
+
+      - items:
+          - const: plathome,openblocks-ax3-4
+          - const: marvell,armadaxp-mv78260
+          - const: marvell,armadaxp
+          - const: marvell,armada-370-xp
+
+      - items:
+          - enum:
+              - marvell,axp-db
+              - marvell,axp-gp
+              - marvell,axp-matrix
+          - const: marvell,armadaxp-mv78460
+          - const: marvell,armadaxp
+          - const: marvell,armada-370-xp
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml
new file mode 100644
index 000000000000..81c33e46fecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada375.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 375 Platform
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - const: marvell,a375-db
+      - const: marvell,armada375
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml
new file mode 100644
index 000000000000..5ff6a5439525
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,armada390.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,armada390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 39x Platforms
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,a390-db
+          - const: marvell,armada390
+      - items:
+          - enum:
+              - marvell,a398-db
+          - const: marvell,armada398
+          - const: marvell,armada390
+      - items:
+          - enum:
+              - marvell,a395-gp
+          - const: marvell,armada395
+          - const: marvell,armada390
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
deleted file mode 100644
index aaaf64c56e44..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Marvell Dove Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a Marvell Dove SoC shall have the following properties:
-
-Required root node property:
-- compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
-	compatible = "marvell,dove-global-config", "syscon";
-	reg = <0xe802c 0x14>;
-};
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml
new file mode 100644
index 000000000000..a37804fb30c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,dove.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Dove SoC
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - compulab,cm-a510
+              - solidrun,cubox
+              - globalscale,d2plug
+              - globalscale,d3plug
+              - marvell,dove-db
+          - const: marvell,dove
+      - items:
+          - const: solidrun,cubox-es
+          - const: solidrun,cubox
+          - const: marvell,dove
+      - items:
+          - const: compulab,sbc-a510
+          - const: compulab,cm-a510
+          - const: marvell,dove
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
deleted file mode 100644
index 7d28fe4bf654..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-Marvell Kirkwood SoC Family Device Tree Bindings
-------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
-
-* Required root node properties:
-compatible: must contain "marvell,kirkwood"
-
-In addition, the above compatible shall be extended with the specific
-SoC. Currently known SoC compatibles are:
-
-"marvell,kirkwood-88f6192"
-"marvell,kirkwood-88f6281"
-"marvell,kirkwood-88f6282"
-"marvell,kirkwood-88f6283"
-"marvell,kirkwood-88f6702"
-"marvell,kirkwood-98DX4122"
-
-And in addition, the compatible shall be extended with the specific
-board. Currently known boards are:
-
-"buffalo,linkstation-lsqvl"
-"buffalo,linkstation-lsvl"
-"buffalo,linkstation-lswsxl"
-"buffalo,linkstation-lswxl"
-"buffalo,linkstation-lswvl"
-"buffalo,lschlv2"
-"buffalo,lsxhl"
-"buffalo,lsxl"
-"cloudengines,pogo02"
-"cloudengines,pogoplugv4"
-"dlink,dns-320"
-"dlink,dns-320-a1"
-"dlink,dns-325"
-"dlink,dns-325-a1"
-"dlink,dns-kirkwood"
-"excito,b3"
-"globalscale,dreamplug-003-ds2001"
-"globalscale,guruplug"
-"globalscale,guruplug-server-plus"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug-esata"
-"globalscale,sheevaplug-esata-rev13"
-"iom,iconnect"
-"iom,iconnect-1.1"
-"iom,ix2-200"
-"keymile,km_kirkwood"
-"lacie,cloudbox"
-"lacie,inetspace_v2"
-"lacie,laplug"
-"lacie,nas2big"
-"lacie,netspace_lite_v2"
-"lacie,netspace_max_v2"
-"lacie,netspace_mini_v2"
-"lacie,netspace_v2"
-"marvell,db-88f6281-bp"
-"marvell,db-88f6282-bp"
-"marvell,mv88f6281gtw-ge"
-"marvell,rd88f6281"
-"marvell,rd88f6281"
-"marvell,rd88f6281-a0"
-"marvell,rd88f6281-a1"
-"mpl,cec4"
-"mpl,cec4-10"
-"netgear,readynas"
-"netgear,readynas"
-"netgear,readynas-duo-v2"
-"netgear,readynas-nv+-v2"
-"plathome,openblocks-a6"
-"plathome,openblocks-a7"
-"raidsonic,ib-nas6210"
-"raidsonic,ib-nas6210-b"
-"raidsonic,ib-nas6220"
-"raidsonic,ib-nas6220-b"
-"raidsonic,ib-nas62x0"
-"seagate,dockstar"
-"seagate,goflexnet"
-"synology,ds109"
-"synology,ds110jv10"
-"synology,ds110jv20"
-"synology,ds110jv30"
-"synology,ds111"
-"synology,ds209"
-"synology,ds210jv10"
-"synology,ds210jv20"
-"synology,ds212"
-"synology,ds212jv10"
-"synology,ds212jv20"
-"synology,ds212pv10"
-"synology,ds409"
-"synology,ds409slim"
-"synology,ds410j"
-"synology,ds411"
-"synology,ds411j"
-"synology,ds411slim"
-"synology,ds413jv10"
-"synology,rs212"
-"synology,rs409"
-"synology,rs411"
-"synology,rs812"
-"usi,topkick"
-"usi,topkick-1281P2"
-"zyxel,nsa310"
-"zyxel,nsa310a"
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml
new file mode 100644
index 000000000000..120784066833
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,kirkwood.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Kirkwood SoC Family
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qnap,ts219
+              - qnap,ts419
+              - synology,ds110
+              - synology,ds111
+              - synology,ds209
+              - synology,ds409slim
+              - synology,ds411j
+              - synology,ds411slim
+              - synology,rs212
+              - synology,rs409
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds109
+          - const: synology,ds110jv20
+          - const: synology,ds110
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds110jv10
+          - const: synology,ds110jv30
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds210jv10
+          - const: synology,ds210jv20
+          - const: synology,ds210jv30
+          - const: synology,ds211j
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds212jv10
+          - const: synology,ds212jv20
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds212
+          - const: synology,ds212pv10
+          - const: synology,ds212pv10
+          - const: synology,ds212pv20
+          - const: synology,ds213airv10
+          - const: synology,ds213v10
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds409
+          - const: synology,ds410j
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,ds411
+          - const: synology,ds413jv10
+          - const: marvell,kirkwood
+
+      - items:
+          - const: synology,rs411
+          - const: synology,rs812
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - cloudengines,pogoplugv4
+              - lacie,laplug
+              - lacie,netspace_lite_v2
+              - lacie,netspace_mini_v2
+              - marvell,rd88f6192
+              - seagate,blackarmor-nas220
+          - enum:
+              - marvell,kirkwood-88f6192
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - buffalo,lswsxl
+              - buffalo,lswxl
+              - checkpoint,l-50
+              - cloudengines,pogoe02
+              - ctera,c200-v1
+              - dlink,dir-665
+              - endian,4i-edge-200
+              - excito,b3
+              - globalscale,sheevaplug
+              - hp,t5325
+              - iom,ix2-200
+              - lacie,inetspace_v2
+              - lacie,netspace_v2
+              - lacie,netspace_max_v2
+              - marvell,db-88f6281-bp
+              - marvell,mv88f6281gtw-ge
+              - seagate,dockstar
+              - seagate,goflexnet
+              - zyxel,nsa310
+              - zyxel,nsa320
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - buffalo,lschlv2
+              - buffalo,lsxhl
+          - const: buffalo,lsxl
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: dlink,dns-320-a1
+          - const: dlink,dns-320
+          - const: dlink,dns-kirkwood
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: dlink,dns-325-a1
+          - const: dlink,dns-325
+          - const: dlink,dns-kirkwood
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: globalscale,dreamplug-003-ds2001
+          - const: globalscale,dreamplug
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: globalscale,guruplug-server-plus
+          - const: globalscale,guruplug
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: globalscale,sheevaplug-esata-rev13
+          - const: globalscale,sheevaplug-esata
+          - const: globalscale,sheevaplug
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: iom,iconnect-1.1
+          - const: iom,iconnect
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: lacie,d2net_v2
+          - const: lacie,netxbig
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+      - items:
+          - enum:
+              - lacie,net2big_v2
+              - lacie,net5big_v2
+          - const: lacie,netxbig
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - marvell,openrd-base
+              - marvell,openrd-client
+              - marvell,openrd-ultimate
+          - const: marvell,openrd
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - marvell,rd88f6281-a
+              - marvell,rd88f6281-z0
+          - const: marvell,rd88f6281
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: mpl,cec4-10
+          - const: mpl,cec4
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: raidsonic,ib-nas6210-b
+          - const: raidsonic,ib-nas6220-b
+          - const: raidsonic,ib-nas6210
+          - const: raidsonic,ib-nas6220
+          - const: raidsonic,ib-nas62x0
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - const: zyxel,nsa310a
+          - const: zyxel,nsa310
+          - const: marvell,kirkwood-88f6281
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - buffalo,lsqvl
+              - buffalo,lsvl
+              - buffalo,lswvl
+              - linksys,viper
+              - marvell,db-88f6282-bp
+              - zyxel,nsa325
+          - const: marvell,kirkwood-88f6282
+          - const: marvell,kirkwood
+
+      - items:
+          - const: lacie,nas2big
+          - const: lacie,netxbig
+          - const: marvell,kirkwood-88f6282
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - netgear,readynas-duo-v2
+              - netgear,readynas-nv+-v2
+          - const: netgear,readynas
+          - const: marvell,kirkwood-88f6282
+          - const: marvell,kirkwood
+
+      - items:
+          - const: usi,topkick-1281P2
+          - const: usi,topkick
+          - const: marvell,kirkwood-88f6282
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - plathome,openblocks-a6
+              - plathome,openblocks-a7
+          - const: marvell,kirkwood-88f6283
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - lacie,cloudbox
+              - zyxel,nsa310s
+          - const: marvell,kirkwood-88f6702
+          - const: marvell,kirkwood
+
+      - items:
+          - enum:
+              - keymile,km_fixedeth
+              - keymile,km_kirkwood
+          - const: marvell,kirkwood-98DX4122
+          - const: marvell,kirkwood
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
deleted file mode 100644
index 748a8f287462..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Orion SoC Family Device Tree Bindings
----------------------------------------------
-
-Boards with a SoC of the Marvell Orion family, eg 88f5181
-
-* Required root node properties:
-compatible: must contain "marvell,orion5x"
-
-In addition, the above compatible shall be extended with the specific
-SoC. Currently known SoC compatibles are:
-
-"marvell,orion5x-88f5181"
-"marvell,orion5x-88f5182"
-
-And in addition, the compatible shall be extended with the specific
-board. Currently known boards are:
-
-"buffalo,lsgl"
-"buffalo,lswsgl"
-"buffalo,lswtgl"
-"lacie,ethernet-disk-mini-v2"
-"lacie,d2-network"
-"marvell,rd-88f5182-nas"
-"maxtor,shared-storage-2"
-"netgear,wnr854t"
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml
new file mode 100644
index 000000000000..c0417591b2be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,orion5x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion5x SoC Family
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - netgear,wnr854t
+          - const: marvell,orion5x-88f5181
+          - const: marvell,orion5x
+      - items:
+          - enum:
+              - buffalo,kurobox-pro
+              - buffalo,lschl
+              - buffalo,lsgl
+              - buffalo,lswsgl
+              - buffalo,lswtgl
+              - lacie,ethernet-disk-mini-v2
+              - lacie,d2-network
+              - marvell,rd-88f5182-nas
+              - maxtor,shared-storage-2
+          - const: marvell,orion5x-88f5182
+          - const: marvell,orion5x
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 0fa55497b96f..718d732174b9 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mediatek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek SoC based Platforms Device Tree Bindings
+title: MediaTek SoC based Platforms
 
 maintainers:
   - Sean Wang <sean.wang@mediatek.com>
@@ -17,6 +17,7 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      # Sort by SoC (last) compatible, then board compatible
       - items:
           - enum:
               - mediatek,mt2701-evb
@@ -28,10 +29,20 @@ properties:
           - const: mediatek,mt2712
       - items:
           - enum:
+              - jty,d101
+              - lenovo,a369i
+          - const: mediatek,mt6572
+      - items:
+          - enum:
               - mediatek,mt6580-evbp1
           - const: mediatek,mt6580
       - items:
           - enum:
+              - alcatel,yarisxl
+              - prestigio,pmt5008-3g
+          - const: mediatek,mt6582
+      - items:
+          - enum:
               - fairphone,fp1
               - mundoreader,bq-aquaris5
           - const: mediatek,mt6589
@@ -54,6 +65,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt6795-evb
+              - sony,xperia-m5
           - const: mediatek,mt6795
       - items:
           - enum:
@@ -79,6 +91,37 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - cudy,wr3000-v1
+              - openwrt,one
+              - xiaomi,ax3000t
+          - const: mediatek,mt7981b
+      - items:
+          - enum:
+              - acelink,ew-7886cax
+              - bananapi,bpi-r3
+              - bananapi,bpi-r3mini
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
+      - items:
+          - enum:
+              - bananapi,bpi-r4
+          - const: mediatek,mt7988a
+      - items:
+          - const: bananapi,bpi-r4-2g5
+          - const: bananapi,bpi-r4
+          - const: mediatek,mt7988a
+      - items:
+          - enum:
+              - bananapi,bpi-r4-pro-4e
+              - bananapi,bpi-r4-pro-8x
+          - const: bananapi,bpi-r4-pro
+          - const: mediatek,mt7988a
+      - items:
+          - enum:
               - mediatek,mt8127-moose
           - const: mediatek,mt8127
       - items:
@@ -115,24 +158,13 @@ properties:
           - enum:
               - mediatek,mt8173-evb
           - const: mediatek,mt8173
-      - items:
-          - enum:
-              - mediatek,mt8183-evb
-          - const: mediatek,mt8183
-      - items:
-          - enum:
-              - mediatek,mt8195-evb
-          - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
         items:
           - const: google,burnet
           - const: mediatek,mt8183
-      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+      - description: Google Cozmo (Acer Chromebook 314)
         items:
-          - enum:
-              - google,krane-sku0
-              - google,krane-sku176
-          - const: google,krane
+          - const: google,cozmo
           - const: mediatek,mt8183
       - description: Google Damu (ASUS Chromebook Flip CM3)
         items:
@@ -143,7 +175,9 @@ properties:
           - enum:
               - google,fennel-sku0
               - google,fennel-sku1
+              - google,fennel-sku2
               - google,fennel-sku6
+              - google,fennel-sku7
           - const: google,fennel
           - const: mediatek,mt8183
       - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
@@ -159,10 +193,23 @@ properties:
           - const: google,kakadu-rev2
           - const: google,kakadu
           - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3-sku22
+          - const: google,kakadu-rev2-sku22
+          - const: google,kakadu
+          - const: mediatek,mt8183
       - description: Google Kappa (HP Chromebook 11a)
         items:
           - const: google,kappa
           - const: mediatek,mt8183
+      - description: Google Katsu (ASUS Chromebook Detachable CZ1)
+        items:
+          - enum:
+              - google,katsu-sku32
+              - google,katsu-sku38
+          - const: google,katsu
+          - const: mediatek,mt8183
       - description: Google Kodama (Lenovo 10e Chromebook Tablet)
         items:
           - enum:
@@ -172,6 +219,27 @@ properties:
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
+      - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
+        items:
+          - enum:
+              - google,makomo-sku0
+              - google,makomo-sku1
+          - const: google,makomo
+          - const: mediatek,mt8183
+      - description: Google Pico (Acer Chromebook Spin 311)
+        items:
+          - enum:
+              - google,pico-sku1
+              - google,pico-sku2
+          - const: google,pico
+          - const: mediatek,mt8183
       - description: Google Willow (Acer Chromebook 311 C722/C722T)
         items:
           - enum:
@@ -181,8 +249,213 @@ properties:
           - const: mediatek,mt8183
       - items:
           - enum:
+              - mediatek,mt8183-evb
+          - const: mediatek,mt8183
+      - items:
+          - enum:
               - mediatek,mt8183-pumpkin
           - const: mediatek,mt8183
+      - description: Google Chinchou (Asus Chromebook CZ1104CM2A/CZ1204CM2A)
+        items:
+          - const: google,chinchou-sku0
+          - const: google,chinchou-sku2
+          - const: google,chinchou-sku4
+          - const: google,chinchou-sku5
+          - const: google,chinchou
+          - const: mediatek,mt8186
+      - description: Google Chinchou (Asus Chromebook CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A)
+        items:
+          - const: google,chinchou-sku1
+          - const: google,chinchou-sku3
+          - const: google,chinchou-sku6
+          - const: google,chinchou-sku7
+          - const: google,chinchou-sku17
+          - const: google,chinchou-sku20
+          - const: google,chinchou-sku22
+          - const: google,chinchou-sku23
+          - const: google,chinchou
+          - const: mediatek,mt8186
+      - description: Google Chinchou360 (Asus Chromebook CZ1104FM2A/CZ1204FM2A Flip)
+        items:
+          - const: google,chinchou-sku16
+          - const: google,chinchou-sku18
+          - const: google,chinchou-sku19
+          - const: google,chinchou-sku21
+          - const: google,chinchou
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393219
+          - const: google,steelix-sku393216
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393220
+          - const: google,steelix-sku393217
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393221
+          - const: google,steelix-sku393218
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Ponyta
+        items:
+          - enum:
+              - google,ponyta-sku0
+              - google,ponyta-sku1
+          - const: google,ponyta
+          - const: mediatek,mt8186
+      - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
+        items:
+          - const: google,steelix-sku196609
+          - const: google,steelix-sku196608
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Squirtle (Acer Chromebook Spin 311 (R724T)
+        items:
+          - const: google,squirtle
+          - const: mediatek,mt8186
+      - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001))
+        items:
+          - const: google,starmie-sku0
+          - const: google,starmie-sku2
+          - const: google,starmie-sku3
+          - const: google,starmie
+          - const: mediatek,mt8186
+      - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001))
+        items:
+          - const: google,starmie-sku1
+          - const: google,starmie-sku4
+          - const: google,starmie
+          - const: mediatek,mt8186
+      - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
+        items:
+          - enum:
+              - google,steelix-sku131072
+              - google,steelix-sku131073
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262147
+          - const: google,tentacruel-sku262146
+          - const: google,tentacruel-sku262145
+          - const: google,tentacruel-sku262144
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262151
+          - const: google,tentacruel-sku262150
+          - const: google,tentacruel-sku262149
+          - const: google,tentacruel-sku262148
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327681
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327683
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Voltorb (Acer Chromebook 311 C723/C732T)
+        items:
+          - const: google,voltorb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - description: Google Ciri (Lenovo Chromebook Duet (11", 9))
+        items:
+          - enum:
+              - google,ciri-sku0
+              - google,ciri-sku1
+              - google,ciri-sku2
+              - google,ciri-sku3
+              - google,ciri-sku4
+              - google,ciri-sku5
+              - google,ciri-sku6
+              - google,ciri-sku7
+          - const: google,ciri
+          - const: mediatek,mt8188
+      - items:
+          - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: HP Dojo sku1, 3, 5, 7 (HP Chromebook x360 13b-ca0002sa)
+        items:
+          - const: google,dojo-sku7
+          - const: google,dojo-sku5
+          - const: google,dojo-sku3
+          - const: google,dojo-sku1
+          - const: google,dojo
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8365-evk
+          - const: mediatek,mt8365
+      - items:
+          - enum:
+              - grinn,genio-510-sbc
+              - mediatek,mt8370-evk
+          - const: mediatek,mt8370
+          - const: mediatek,mt8188
+      - items:
+          - enum:
+              - grinn,genio-700-sbc
+              - mediatek,mt8390-evk
+          - const: mediatek,mt8390
+          - const: mediatek,mt8188
+      - items:
+          - enum:
+              - kontron,3-5-sbc-i1200
+              - mediatek,mt8395-evk
+              - mediatek,mt8395-evk-ufs
+              - radxa,nio-12l
+          - const: mediatek,mt8395
+          - const: mediatek,mt8195
       - items:
           - enum:
               - mediatek,mt8516-pumpkin
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
deleted file mode 100644
index ea827e8763de..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek apmixedsys controller
-==============================
-
-The Mediatek apmixedsys controller provides the PLLs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt2712-apmixedsys", "syscon"
-	- "mediatek,mt6765-apmixedsys", "syscon"
-	- "mediatek,mt6779-apmixedsys", "syscon"
-	- "mediatek,mt6797-apmixedsys"
-	- "mediatek,mt7622-apmixedsys"
-	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt7629-apmixedsys"
-	- "mediatek,mt8135-apmixedsys"
-	- "mediatek,mt8167-apmixedsys", "syscon"
-	- "mediatek,mt8173-apmixedsys"
-	- "mediatek,mt8183-apmixedsys", "syscon"
-	- "mediatek,mt8516-apmixedsys"
-- #clock-cells: Must be 1
-
-The apmixedsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-apmixedsys: clock-controller@10209000 {
-	compatible = "mediatek,mt8173-apmixedsys";
-	reg = <0 0x10209000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
deleted file mode 100644
index 699776be1dd3..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-MediaTek AUDSYS controller
-============================
-
-The MediaTek AUDSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt6765-audsys", "syscon"
-	- "mediatek,mt6779-audio", "syscon"
-	- "mediatek,mt7622-audsys", "syscon"
-	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
-	- "mediatek,mt8167-audiosys", "syscon"
-	- "mediatek,mt8183-audiosys", "syscon"
-	- "mediatek,mt8192-audsys", "syscon"
-	- "mediatek,mt8516-audsys", "syscon"
-- #clock-cells: Must be 1
-
-The AUDSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Required sub-nodes:
--------
-For common binding part and usage, refer to
-../sonud/mt2701-afe-pcm.txt.
-
-Example:
-
-	audsys: clock-controller@11220000 {
-		compatible = "mediatek,mt7622-audsys", "syscon";
-		reg = <0 0x11220000 0 0x2000>;
-		#clock-cells = <1>;
-
-		afe: audio-controller {
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
new file mode 100644
index 000000000000..f3a761cbd0fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AUDSYS controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@collabora.com>
+
+description:
+  The MediaTek AUDSYS controller provides various clocks to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-audsys
+              - mediatek,mt6765-audsys
+              - mediatek,mt6779-audsys
+              - mediatek,mt7622-audsys
+              - mediatek,mt8167-audsys
+              - mediatek,mt8173-audsys
+              - mediatek,mt8183-audiosys
+              - mediatek,mt8183-audsys
+              - mediatek,mt8186-audsys
+              - mediatek,mt8192-audsys
+              - mediatek,mt8516-audsys
+          - const: syscon
+      - items:
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-audsys
+          - const: mediatek,mt2701-audsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  audio-controller:
+    type: object
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt8183-audiosys
+then:
+  properties:
+    audio-controller:
+      $ref: /schemas/sound/mediatek,mt8183-audio.yaml#
+else:
+  properties:
+    audio-controller:
+      $ref: /schemas/sound/mediatek,mt2701-audio.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    #include <dt-bindings/clock/mt2701-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        audsys: clock-controller@11220000 {
+            compatible = "mediatek,mt7622-audsys", "syscon";
+            reg = <0 0x11220000 0 0x2000>;
+            #clock-cells = <1>;
+
+            afe: audio-controller {
+                compatible = "mediatek,mt2701-audio";
+                interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                             <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "afe", "asys";
+                power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+                clocks = <&infracfg CLK_INFRA_AUDIO>,
+                         <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                         <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                         <&topckgen CLK_TOP_AUD_48K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_44K_TIMING>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+                         <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+                         <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+                         <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+                         <&audsys CLK_AUD_I2SO1>,
+                         <&audsys CLK_AUD_I2SO2>,
+                         <&audsys CLK_AUD_I2SO3>,
+                         <&audsys CLK_AUD_I2SO4>,
+                         <&audsys CLK_AUD_I2SIN1>,
+                         <&audsys CLK_AUD_I2SIN2>,
+                         <&audsys CLK_AUD_I2SIN3>,
+                         <&audsys CLK_AUD_I2SIN4>,
+                         <&audsys CLK_AUD_ASRCO1>,
+                         <&audsys CLK_AUD_ASRCO2>,
+                         <&audsys CLK_AUD_ASRCO3>,
+                         <&audsys CLK_AUD_ASRCO4>,
+                         <&audsys CLK_AUD_AFE>,
+                         <&audsys CLK_AUD_AFE_CONN>,
+                         <&audsys CLK_AUD_A1SYS>,
+                         <&audsys CLK_AUD_A2SYS>,
+                         <&audsys CLK_AUD_AFE_MRGIF>;
+
+                clock-names = "infra_sys_audio_clk",
+                              "top_audio_mux1_sel",
+                              "top_audio_mux2_sel",
+                              "top_audio_a1sys_hp",
+                              "top_audio_a2sys_hp",
+                              "i2s0_src_sel",
+                              "i2s1_src_sel",
+                              "i2s2_src_sel",
+                              "i2s3_src_sel",
+                              "i2s0_src_div",
+                              "i2s1_src_div",
+                              "i2s2_src_div",
+                              "i2s3_src_div",
+                              "i2s0_mclk_en",
+                              "i2s1_mclk_en",
+                              "i2s2_mclk_en",
+                              "i2s3_mclk_en",
+                              "i2so0_hop_ck",
+                              "i2so1_hop_ck",
+                              "i2so2_hop_ck",
+                              "i2so3_hop_ck",
+                              "i2si0_hop_ck",
+                              "i2si1_hop_ck",
+                              "i2si2_hop_ck",
+                              "i2si3_hop_ck",
+                              "asrc0_out_ck",
+                              "asrc1_out_ck",
+                              "asrc2_out_ck",
+                              "asrc3_out_ck",
+                              "audio_afe_pd",
+                              "audio_afe_conn_pd",
+                              "audio_a1sys_pd",
+                              "audio_a2sys_pd",
+                              "audio_mrgif_pd";
+
+                assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+                                  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+                                  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+                assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+                                         <&topckgen CLK_TOP_AUD2PLL_90M>;
+                assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
deleted file mode 100644
index 149567a38215..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Mediatek bdpsys controller
-============================
-
-The Mediatek bdpsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-bdpsys", "syscon"
-	- "mediatek,mt2712-bdpsys", "syscon"
-	- "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
-- #clock-cells: Must be 1
-
-The bdpsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-bdpsys: clock-controller@1c000000 {
-	compatible = "mediatek,mt2701-bdpsys", "syscon";
-	reg = <0 0x1c000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
deleted file mode 100644
index a0ce82085ad0..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-MediaTek CAMSYS controller
-============================
-
-The MediaTek camsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt6765-camsys", "syscon"
-	- "mediatek,mt6779-camsys", "syscon"
-	- "mediatek,mt8183-camsys", "syscon"
-- #clock-cells: Must be 1
-
-The camsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-camsys: camsys@1a000000  {
-	compatible = "mediatek,mt8183-camsys", "syscon";
-	reg = <0 0x1a000000  0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
deleted file mode 100644
index 6b7e8067e7aa..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Mediatek ethsys controller
-============================
-
-The Mediatek ethsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7622-ethsys", "syscon"
-	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
-	- "mediatek,mt7629-ethsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The ethsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ethsys: clock-controller@1b000000 {
-	compatible = "mediatek,mt2701-ethsys", "syscon";
-	reg = <0 0x1b000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
deleted file mode 100644
index 323905af82c3..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Mediatek hifsys controller
-============================
-
-The Mediatek hifsys controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-hifsys", "syscon"
-	- "mediatek,mt7622-hifsys", "syscon"
-	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
-- #clock-cells: Must be 1
-
-The hifsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-hifsys: clock-controller@1a000000 {
-	compatible = "mediatek,mt2701-hifsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
deleted file mode 100644
index dce4c9241932..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Mediatek imgsys controller
-============================
-
-The Mediatek imgsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-imgsys", "syscon"
-	- "mediatek,mt2712-imgsys", "syscon"
-	- "mediatek,mt6765-imgsys", "syscon"
-	- "mediatek,mt6779-imgsys", "syscon"
-	- "mediatek,mt6797-imgsys", "syscon"
-	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
-	- "mediatek,mt8167-imgsys", "syscon"
-	- "mediatek,mt8173-imgsys", "syscon"
-	- "mediatek,mt8183-imgsys", "syscon"
-- #clock-cells: Must be 1
-
-The imgsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-imgsys: clock-controller@15000000 {
-	compatible = "mediatek,mt8173-imgsys", "syscon";
-	reg = <0 0x15000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
deleted file mode 100644
index eb3523c7a7be..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Mediatek infracfg controller
-============================
-
-The Mediatek infracfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt2712-infracfg", "syscon"
-	- "mediatek,mt6765-infracfg", "syscon"
-	- "mediatek,mt6779-infracfg_ao", "syscon"
-	- "mediatek,mt6797-infracfg", "syscon"
-	- "mediatek,mt7622-infracfg", "syscon"
-	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt7629-infracfg", "syscon"
-	- "mediatek,mt8135-infracfg", "syscon"
-	- "mediatek,mt8167-infracfg", "syscon"
-	- "mediatek,mt8173-infracfg", "syscon"
-	- "mediatek,mt8183-infracfg", "syscon"
-	- "mediatek,mt8516-infracfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The infracfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-infracfg: power-controller@10001000 {
-	compatible = "mediatek,mt8173-infracfg", "syscon";
-	reg = <0 0x10001000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt
deleted file mode 100644
index 2ce889b023d9..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Mediatek ipesys controller
-============================
-
-The Mediatek ipesys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt6779-ipesys", "syscon"
-- #clock-cells: Must be 1
-
-The ipesys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ipesys: clock-controller@1b000000 {
-	compatible = "mediatek,mt6779-ipesys", "syscon";
-	reg = <0 0x1b000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt
deleted file mode 100644
index aabc8c5c8ed2..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Mediatek IPU controller
-============================
-
-The Mediatek ipu controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt8183-ipu_conn", "syscon"
-	- "mediatek,mt8183-ipu_adl", "syscon"
-	- "mediatek,mt8183-ipu_core0", "syscon"
-	- "mediatek,mt8183-ipu_core1", "syscon"
-- #clock-cells: Must be 1
-
-The ipu controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ipu_conn: syscon@19000000 {
-	compatible = "mediatek,mt8183-ipu_conn", "syscon";
-	reg = <0 0x19000000 0 0x1000>;
-	#clock-cells = <1>;
-};
-
-ipu_adl: syscon@19010000 {
-	compatible = "mediatek,mt8183-ipu_adl", "syscon";
-	reg = <0 0x19010000 0 0x1000>;
-	#clock-cells = <1>;
-};
-
-ipu_core0: syscon@19180000 {
-	compatible = "mediatek,mt8183-ipu_core0", "syscon";
-	reg = <0 0x19180000 0 0x1000>;
-	#clock-cells = <1>;
-};
-
-ipu_core1: syscon@19280000 {
-	compatible = "mediatek,mt8183-ipu_core1", "syscon";
-	reg = <0 0x19280000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
deleted file mode 100644
index 2df799cd06a7..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Mediatek jpgdecsys controller
-============================
-
-The Mediatek jpgdecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2712-jpgdecsys", "syscon"
-- #clock-cells: Must be 1
-
-The jpgdecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-jpgdecsys: syscon@19000000 {
-	compatible = "mediatek,mt2712-jpgdecsys", "syscon";
-	reg = <0 0x19000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
deleted file mode 100644
index 2b882b7ca72e..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Mediatek mcucfg controller
-============================
-
-The Mediatek mcucfg controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2712-mcucfg", "syscon"
-	- "mediatek,mt8183-mcucfg", "syscon"
-- #clock-cells: Must be 1
-
-The mcucfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-mcucfg: syscon@10220000 {
-	compatible = "mediatek,mt2712-mcucfg", "syscon";
-	reg = <0 0x10220000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
deleted file mode 100644
index 054424fb64b4..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Mediatek mfgcfg controller
-============================
-
-The Mediatek mfgcfg controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2712-mfgcfg", "syscon"
-	- "mediatek,mt6779-mfgcfg", "syscon"
-	- "mediatek,mt8167-mfgcfg", "syscon"
-	- "mediatek,mt8183-mfgcfg", "syscon"
-- #clock-cells: Must be 1
-
-The mfgcfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-mfgcfg: syscon@13000000 {
-	compatible = "mediatek,mt2712-mfgcfg", "syscon";
-	reg = <0 0x13000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
deleted file mode 100644
index 8be5978f388d..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Mediatek mipi0a (mipi_rx_ana_csi0a) controller
-============================
-
-The Mediatek mipi0a controller provides various clocks
-to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt6765-mipi0a", "syscon"
-- #clock-cells: Must be 1
-
-The mipi0a controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-The mipi0a controller also uses the common power domain from
-Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power doamins are defined in dt-bindings/power/mt*-power.h.
-
-Example:
-
-mipi0a: clock-controller@11c10000 {
-	compatible = "mediatek,mt6765-mipi0a", "syscon";
-	reg = <0 0x11c10000 0 0x1000>;
-	power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 763c62323a74..3f4262e93c78 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek mmsys controller
 
@@ -25,27 +25,102 @@ properties:
               - mediatek,mt2712-mmsys
               - mediatek,mt6765-mmsys
               - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
               - mediatek,mt6797-mmsys
               - mediatek,mt8167-mmsys
               - mediatek,mt8173-mmsys
               - mediatek,mt8183-mmsys
+              - mediatek,mt8186-mmsys
+              - mediatek,mt8188-vdosys0
+              - mediatek,mt8188-vdosys1
+              - mediatek,mt8188-vppsys0
+              - mediatek,mt8188-vppsys1
               - mediatek,mt8192-mmsys
+              - mediatek,mt8195-vdosys1
+              - mediatek,mt8195-vppsys0
+              - mediatek,mt8195-vppsys1
               - mediatek,mt8365-mmsys
           - const: syscon
+
+      - description: vdosys0 and vdosys1 are 2 display HW pipelines,
+                     so mt8195 binding should be deprecated.
+        deprecated: true
+        items:
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
       - items:
           - const: mediatek,mt7623-mmsys
           - const: mediatek,mt2701-mmsys
           - const: syscon
 
+      - items:
+          - const: mediatek,mt8195-vdosys0
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mboxes:
+    description:
+      Using mailbox to communicate with GCE, it should have this
+      property and list of phandle, mailbox specifiers. See
+      Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
   "#clock-cells":
     const: 1
 
   '#reset-cells':
     const: 1
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port connects the MMSYS/VDOSYS output to
+      the first component of one display pipeline, for example one of
+      the available OVL or RDMA blocks.
+      Some MediaTek SoCs support multiple display outputs per MMSYS.
+    properties:
+      endpoint@0:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the primary display pipeline
+
+      endpoint@1:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the secondary display pipeline
+
+      endpoint@2:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the tertiary display pipeline
+
+    anyOf:
+      - required:
+          - endpoint@0
+      - required:
+          - endpoint@1
+      - required:
+          - endpoint@2
+
 required:
   - compatible
   - reg
@@ -55,9 +130,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
     mmsys: syscon@14000000 {
         compatible = "mediatek,mt8173-mmsys", "syscon";
         reg = <0x14000000 0x1000>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+                 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
new file mode 100644
index 000000000000..d89848a8f478
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE Mirror Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek PCIE mirror provides a configuration interface for PCIE
+  controller on MT7622 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-pcie-mirror
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_mirror: pcie-mirror@10000400 {
+        compatible = "mediatek,mt7622-pcie-mirror", "syscon";
+        reg = <0 0x10000400 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
new file mode 100644
index 000000000000..e7720caf31b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek wireless ethernet dispatch controller can be configured to
+  intercept and handle access to the WLAN DMA queues and PCIe interrupts
+  and implement hardware flow offloading from ethernet to WLAN.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-wed
+          - mediatek,mt7981-wed
+          - mediatek,mt7986-wed
+          - mediatek,mt7988-wed
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    items:
+      - description: firmware EMI region
+      - description: firmware ILM region
+      - description: firmware DLM region
+      - description: firmware CPU DATA region
+      - description: firmware BOOT region
+
+  memory-region-names:
+    items:
+      - const: wo-emi
+      - const: wo-ilm
+      - const: wo-dlm
+      - const: wo-data
+      - const: wo-boot
+
+  mediatek,wo-ccif:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: mediatek wed-wo controller interface.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-wed
+    then:
+      properties:
+        memory-region-names: false
+        memory-region: false
+        mediatek,wo-ccif: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed0: wed@1020a000 {
+        compatible = "mediatek,mt7622-wed","syscon";
+        reg = <0 0x1020a000 0 0x1000>;
+        interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      wed@15010000 {
+        compatible = "mediatek,mt7986-wed", "syscon";
+        reg = <0 0x15010000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+
+        memory-region = <&wo_emi>, <&wo_ilm>, <&wo_dlm>,
+                        <&wo_data>, <&wo_boot>;
+        memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+                              "wo-data", "wo-boot";
+        mediatek,wo-ccif = <&wo_ccif0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
new file mode 100644
index 000000000000..82f64469a601
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE WED Controller for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek WED PCIE provides a configuration interface for PCIE
+  controller on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wed-pcie
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed_pcie: wed-pcie@10003000 {
+        compatible = "mediatek,mt7986-wed-pcie",
+                     "syscon";
+        reg = <0 0x10003000 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
deleted file mode 100644
index d179a61536f4..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek PCIESYS controller
-============================
-
-The MediaTek PCIESYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-pciesys", "syscon"
-	- "mediatek,mt7629-pciesys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The PCIESYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-pciesys: pciesys@1a100800 {
-	compatible = "mediatek,mt7622-pciesys", "syscon";
-	reg = <0 0x1a100800 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
deleted file mode 100644
index 30cb645c0e54..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-MediaTek SGMIISYS controller
-============================
-
-The MediaTek SGMIISYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-sgmiisys", "syscon"
-	- "mediatek,mt7629-sgmiisys", "syscon"
-- #clock-cells: Must be 1
-
-The SGMIISYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-sgmiisys: sgmiisys@1b128000 {
-	compatible = "mediatek,mt7622-sgmiisys", "syscon";
-	reg = <0 0x1b128000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
deleted file mode 100644
index 7cb02c930613..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek SSUSBSYS controller
-============================
-
-The MediaTek SSUSBSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-ssusbsys", "syscon"
-	- "mediatek,mt7629-ssusbsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The SSUSBSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ssusbsys: ssusbsys@1a000000 {
-	compatible = "mediatek,mt7622-ssusbsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
deleted file mode 100644
index 5ce7578cf274..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek topckgen controller
-============================
-
-The Mediatek topckgen controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-topckgen"
-	- "mediatek,mt2712-topckgen", "syscon"
-	- "mediatek,mt6765-topckgen", "syscon"
-	- "mediatek,mt6779-topckgen", "syscon"
-	- "mediatek,mt6797-topckgen"
-	- "mediatek,mt7622-topckgen"
-	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
-	- "mediatek,mt7629-topckgen"
-	- "mediatek,mt8135-topckgen"
-	- "mediatek,mt8167-topckgen", "syscon"
-	- "mediatek,mt8173-topckgen"
-	- "mediatek,mt8183-topckgen", "syscon"
-	- "mediatek,mt8516-topckgen"
-- #clock-cells: Must be 1
-
-The topckgen controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-topckgen: power-controller@10000000 {
-	compatible = "mediatek,mt8173-topckgen";
-	reg = <0 0x10000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
deleted file mode 100644
index c877bcc1a5c5..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Mediatek vcodecsys controller
-============================
-
-The Mediatek vcodecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt6765-vcodecsys", "syscon"
-- #clock-cells: Must be 1
-
-The vcodecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-The vcodecsys controller also uses the common power domain from
-Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-The available power doamins are defined in dt-bindings/power/mt*-power.h.
-
-Example:
-
-venc_gcon: clock-controller@17000000 {
-	compatible = "mediatek,mt6765-vcodecsys", "syscon";
-	reg = <0 0x17000000 0 0x10000>;
-	power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
deleted file mode 100644
index 98195169176a..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Mediatek vdecsys controller
-============================
-
-The Mediatek vdecsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-vdecsys", "syscon"
-	- "mediatek,mt2712-vdecsys", "syscon"
-	- "mediatek,mt6779-vdecsys", "syscon"
-	- "mediatek,mt6797-vdecsys", "syscon"
-	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
-	- "mediatek,mt8167-vdecsys", "syscon"
-	- "mediatek,mt8173-vdecsys", "syscon"
-	- "mediatek,mt8183-vdecsys", "syscon"
-- #clock-cells: Must be 1
-
-The vdecsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vdecsys: clock-controller@16000000 {
-	compatible = "mediatek,mt8173-vdecsys", "syscon";
-	reg = <0 0x16000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
deleted file mode 100644
index 3cc299fd7857..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Mediatek vencltsys controller
-============================
-
-The Mediatek vencltsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt8173-vencltsys", "syscon"
-- #clock-cells: Must be 1
-
-The vencltsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vencltsys: clock-controller@19000000 {
-	compatible = "mediatek,mt8173-vencltsys", "syscon";
-	reg = <0 0x19000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
deleted file mode 100644
index 6a6a14e15cd7..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Mediatek vencsys controller
-============================
-
-The Mediatek vencsys controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2712-vencsys", "syscon"
-	- "mediatek,mt6779-vencsys", "syscon"
-	- "mediatek,mt6797-vencsys", "syscon"
-	- "mediatek,mt8173-vencsys", "syscon"
-	- "mediatek,mt8183-vencsys", "syscon"
-- #clock-cells: Must be 1
-
-The vencsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-vencsys: clock-controller@18000000 {
-	compatible = "mediatek,mt8173-vencsys", "syscon";
-	reg = <0 0x18000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
index 6193388c6318..9a0d54e9799c 100644
--- a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Sparx5 Boards Device Tree Bindings
+title: Microchip Sparx5 Boards
 
 maintainers:
   - Lars Povlsen <lars.povlsen@microchip.com>
diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml
index 670d24ce8ec5..42565280914c 100644
--- a/Documentation/devicetree/bindings/arm/moxart.yaml
+++ b/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/moxart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MOXA ART device tree bindings
+title: MOXA ART
 
 maintainers:
   - Jonas Jensen <jonas.jensen@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
deleted file mode 100644
index 0d244b999d10..000000000000
--- a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell Feroceon Cache
-
-Required properties:
-- compatible : Should be either "marvell,feroceon-cache" or
-  	       "marvell,kirkwood-cache".
-
-Optional properties:
-- reg        : Address of the L2 cache control register. Mandatory for
-  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
-
-
-Example:
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index d58116136154..f73bb8ec3a1a 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mrvl/mrvl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Platforms Device Tree Bindings
+title: Marvell Platforms
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
@@ -35,6 +35,11 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+      - description: PXA1908 based boards
+        items:
+          - enum:
+              - samsung,coreprimevelte
+          - const: marvell,pxa1908
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
deleted file mode 100644
index 31af1cbb60bd..000000000000
--- a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Marvell Tauros2 Cache
-
-Required properties:
-- compatible : Should be "marvell,tauros2-cache".
-- marvell,tauros2-cache-features : Specify the features supported for the
-  tauros2 cache.
-  The features including
-    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
-    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
-  The definition can be found at
-  arch/arm/include/asm/hardware/cache-tauros2.h
-
-Example:
-	L2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0x3>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
deleted file mode 100644
index 6ce0b212ec6d..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-QCOM Idle States for cpuidle driver
-
-ARM provides idle-state node to define the cpuidle states, as defined in [1].
-cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
-states. Idle states have different enter/exit latency and residency values.
-The idle states supported by the QCOM SoC are defined as -
-
-    * Standby
-    * Retention
-    * Standalone Power Collapse (Standalone PC or SPC)
-    * Power Collapse (PC)
-
-Standby: Standby does a little more in addition to architectural clock gating.
-When the WFI instruction is executed the ARM core would gate its internal
-clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
-trigger to execute the SPM state machine. The SPM state machine waits for the
-interrupt to trigger the core back in to active. This triggers the cache
-hierarchy to enter standby states, when all cpus are idle. An interrupt brings
-the SPM state machine out of its wait, the next step is to ensure that the
-cache hierarchy is also out of standby, and then the cpu is allowed to resume
-execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
-driver and is not defined in the DT. The SPM state machine should be
-configured to execute this state by default and after executing every other
-state below.
-
-Retention: Retention is a low power state where the core is clock gated and
-the memory and the registers associated with the core are retained. The
-voltage may be reduced to the minimum value needed to keep the processor
-registers active. The SPM should be configured to execute the retention
-sequence and would wait for interrupt, before restoring the cpu to execution
-state. Retention may have a slightly higher latency than Standby.
-
-Standalone PC: A cpu can power down and warmboot if there is a sufficient time
-between the time it enters idle and the next known wake up. SPC mode is used
-to indicate a core entering a power down state without consulting any other
-cpu or the system resources. This helps save power only on that core.  The SPM
-sequence for this idle state is programmed to power down the supply to the
-core, wait for the interrupt, restore power to the core, and ensure the
-system state including cache hierarchy is ready before allowing core to
-resume. Applying power and resetting the core causes the core to warmboot
-back into Elevation Level (EL) which trampolines the control back to the
-kernel. Entering a power down state for the cpu, needs to be done by trapping
-into a EL. Failing to do so, would result in a crash enforced by the warm boot
-code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
-be flushed in s/w, before powering down the core.
-
-Power Collapse: This state is similar to the SPC mode, but distinguishes
-itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
-modes. In a hierarchical power domain SoC, this means L2 and other caches can
-be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
-voltages reduced, provided all cpus enter this state.  Since the span of low
-power modes possible at this state is vast, the exit latency and the residency
-of this low power mode would be considered high even though at a cpu level,
-this essentially is cpu power down. The SPM in this state also may handshake
-with the Resource power manager (RPM) processor in the SoC to indicate a
-complete application processor subsystem shut down.
-
-The idle-state for QCOM SoCs are distinguished by the compatible property of
-the idle-states device node.
-
-The devicetree representation of the idle state should be -
-
-Required properties:
-
-- compatible: Must be one of -
-			"qcom,idle-state-ret",
-			"qcom,idle-state-spc",
-			"qcom,idle-state-pc",
-		and "arm,idle-state".
-
-Other required and optional properties are specified in [1].
-
-Example:
-
-	idle-states {
-		CPU_SPC: spc {
-			compatible = "qcom,idle-state-spc", "arm,idle-state";
-			entry-latency-us = <150>;
-			exit-latency-us = <200>;
-			min-residency-us = <2000>;
-		};
-	};
-
-[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
deleted file mode 100644
index 7f696362a4a1..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
-
-The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
-There is one ACC register region per CPU within the KPSS remapped region as
-well as an alias register region that remaps accesses to the ACC associated
-with the CPU accessing the region.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be one of:
-			"qcom,kpss-acc-v1"
-			"qcom,kpss-acc-v2"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- clocks:
-        Usage: required
-        Value type: <prop-encoded-array>
-        Definition: reference to the pll parents.
-
-- clock-names:
-        Usage: required
-        Value type: <stringlist>
-        Definition: must be "pll8_vote", "pxo".
-
-- clock-output-names:
-	Usage: optional
-	Value type: <string>
-	Definition: Name of the output clock. Typically acpuX_aux where X is a
-		    CPU number starting at 0.
-
-Example:
-
-	clock-controller@2088000 {
-		compatible = "qcom,kpss-acc-v2";
-		reg = <0x02088000 0x1000>,
-		      <0x02008000 0x1000>;
-		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
-		clock-names = "pll8_vote", "pxo";
-		clock-output-names = "acpu0_aux";
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
deleted file mode 100644
index e628758950e1..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be one of the following. The generic compatible
-			"qcom,kpss-gcc" should also be included.
-			"qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-apq8064", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-msm8974", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-msm8960", "qcom,kpss-gcc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the register region
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the pll parents.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "pll8_vote", "pxo".
-
-- clock-output-names:
-	Usage: required
-	Value type: <string>
-	Definition: Name of the output clock. Typically acpu_l2_aux indicating
-		    an L2 cache auxiliary clock.
-
-Example:
-
-	l2cc: clock-controller@2011000 {
-		compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc";
-		reg = <0x2011000 0x1000>;
-		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
-		clock-names = "pll8_vote", "pxo";
-		clock-output-names = "acpu_l2_aux";
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
deleted file mode 100644
index 62fcbd883392..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ /dev/null
@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Last Level Cache Controller
-
-maintainers:
-  - Rishabh Bhatnagar <rishabhb@codeaurora.org>
-  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
-
-description: |
-  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
-  that can be shared by multiple clients. Clients here are different cores in the
-  SoC, the idea is to minimize the local caches at the clients and migrate to
-  common pool of memory. Cache memory is divided into partitions called slices
-  which are assigned to clients. Clients can query the slice details, activate
-  and deactivate them.
-
-properties:
-  compatible:
-    enum:
-      - qcom,sc7180-llcc
-      - qcom,sc7280-llcc
-      - qcom,sdm845-llcc
-      - qcom,sm8150-llcc
-      - qcom,sm8250-llcc
-
-  reg:
-    items:
-      - description: LLCC base register region
-      - description: LLCC broadcast base register region
-
-  reg-names:
-    items:
-      - const: llcc_base
-      - const: llcc_broadcast_base
-
-  interrupts:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - interrupts
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    system-cache-controller@1100000 {
-      compatible = "qcom,sdm845-llcc";
-      reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
-      reg-names = "llcc_base", "llcc_broadcast_base";
-      interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
deleted file mode 100644
index 94d50a949be1..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SPM AVS Wrapper 2 (SAW2)
-
-The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-power-controller that transitions a piece of hardware (like a processor or
-subsystem) into and out of low power modes via a direct connection to
-the PMIC. It can also be wired up to interact with other processors in the
-system, notifying them when a low power state is entered or exited.
-
-Multiple revisions of the SAW hardware are supported using these Device Nodes.
-SAW2 revisions differ in the register offset and configuration data. Also, the
-same revision of the SAW in different SoCs may have different configuration
-data due the the differences in hardware capabilities. Hence the SoC name, the
-version of the SAW hardware in that SoC and the distinction between cpu (big
-or Little) or cache, may be needed to uniquely identify the SAW register
-configuration and initialization data. The compatible string is used to
-indicate this parameter.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Must have
-			"qcom,saw2"
-		    A more specific value could be one of:
-			"qcom,apq8064-saw2-v1.1-cpu"
-			"qcom,msm8226-saw2-v2.1-cpu"
-			"qcom,msm8974-saw2-v2.1-cpu"
-			"qcom,apq8084-saw2-v2.1-cpu"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- regulator:
-	Usage: optional
-	Value type: boolean
-	Definition: Indicates that this SPM device acts as a regulator device
-			device for the core (CPU or Cache) the SPM is attached
-			to.
-
-Example 1:
-
-	power-controller@2099000 {
-		compatible = "qcom,saw2";
-		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-		regulator;
-	};
-
-Example 2:
-	saw0: power-controller@f9089000 {
-		compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-		reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/ssbi.txt b/Documentation/devicetree/bindings/arm/msm/ssbi.txt
deleted file mode 100644
index 54fd5ced3401..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/ssbi.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Qualcomm SSBI
-
-Some Qualcomm MSM devices contain a point-to-point serial bus used to
-communicate with a limited range of devices (mostly power management
-chips).
-
-These require the following properties:
-
-- compatible: "qcom,ssbi"
-
-- qcom,controller-type
-  indicates the SSBI bus variant the controller should use to talk
-  with the slave device.  This should be one of "ssbi", "ssbi2", or
-  "pmic-arbiter".  The type chosen is determined by the attached
-  slave.
-
-The slave device should be the single child node of the ssbi device
-with a compatible field.
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
index 6816bd68f9cf..a8ac4a2d672d 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
@@ -2,8 +2,8 @@
 # Copyright 2020 thingy.jp.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MStar/SigmaStar Armv7 SoC l3bridge
 
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
index 599c65980f5d..5739848000b1 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
@@ -2,8 +2,8 @@
 # Copyright 2020 thingy.jp.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MStar/SigmaStar Armv7 SoC SMP control registers
 
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
index a316eef1b728..937059fcc7b3 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar platforms device tree bindings
+title: MStar platforms
 
 maintainers:
   - Daniel Palmer <daniel@thingy.jp>
@@ -23,8 +23,12 @@ properties:
       - description: infinity2m boards
         items:
           - enum:
+              - 100ask,dongshanpione # 100ask DongShanPiOne
               - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
               - m5stack,unitv2 # M5Stack UnitV2
+              - miyoo,miyoo-mini # Miyoo Mini
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
           - const: mstar,infinity2m
 
       - description: infinity3 boards
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
deleted file mode 100644
index 95e51378089c..000000000000
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NPCM Platforms Device Tree Bindings
-
-maintainers:
-  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: WPCM450 based boards
-        items:
-          - enum:
-              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
-          - const: nuvoton,wpcm450
-
-      - description: NPCM750 based boards
-        items:
-          - enum:
-              - nuvoton,npcm750-evb         # NPCM750 evaluation board
-          - const: nuvoton,npcm750
-
-additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
new file mode 100644
index 000000000000..fb190db61525
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35 series SoC based platforms
+
+maintainers:
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
+  the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: MA35D1 based boards
+        items:
+          - enum:
+              - nuvoton,ma35d1-iot
+              - nuvoton,ma35d1-som
+          - const: nuvoton,ma35d1
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
new file mode 100644
index 000000000000..d386744c8815
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NPCM Platforms
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: WPCM450 based boards
+        items:
+          - enum:
+              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
+          - const: nuvoton,wpcm450
+
+      - description: NPCM750 based boards
+        items:
+          - enum:
+              - nuvoton,npcm750-evb         # NPCM750 evaluation board
+          - const: nuvoton,npcm750
+
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
index c9675c4cdc1b..84dc6b7512af 100644
--- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
+++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra194 CPU Complex device tree bindings
+title: NVIDIA Tegra194 CPU Complex
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -25,7 +25,7 @@ properties:
       - nvidia,tegra194-ccplex
 
   nvidia,bpmp:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the bpmp node that needs to be queried to get
       operating point data for all CPUs.
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index 214c97bc3063..6b7f5e6f99cf 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC32xx Platforms Device Tree Bindings
+title: NXP LPC32xx Platforms
 
 maintainers:
-  - Roland Stigge <stigge@antcom.de>
+  - Vladimir Zapolskiy <vz@mleia.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index f35b77920786..0ce6665df4a2 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -8,7 +8,7 @@ control module driver itself.
 
 See [2] for documentation about clock/clockdomain nodes.
 
-[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
 [2] Documentation/devicetree/bindings/clock/ti/*
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..c863ec07cbbb 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -41,14 +41,6 @@ SoC Type (optional):
 
 SoC Families:
 
-- OMAP2 generic - defaults to OMAP2420
-  compatible = "ti,omap2"
-- OMAP3 generic
-  compatible = "ti,omap3"
-- OMAP4 generic - defaults to OMAP4430
-  compatible = "ti,omap4"
-- OMAP5 generic - defaults to OMAP5430
-  compatible = "ti,omap5"
 - DRA7 generic - defaults to DRA742
   compatible = "ti,dra7"
 - AM33x generic
@@ -58,32 +50,6 @@ SoC Families:
 
 SoCs:
 
-- OMAP2420
-  compatible = "ti,omap2420", "ti,omap2"
-- OMAP2430
-  compatible = "ti,omap2430", "ti,omap2"
-
-- OMAP3430
-  compatible = "ti,omap3430", "ti,omap3"
-  legacy: "ti,omap34xx" - please do not use any more
-- AM3517
-  compatible = "ti,am3517", "ti,omap3"
-- OMAP3630
-  compatible = "ti,omap3630", "ti,omap3"
-  legacy: "ti,omap36xx" - please do not use any more
-- AM335x
-  compatible = "ti,am33xx"
-
-- OMAP4430
-  compatible = "ti,omap4430", "ti,omap4"
-- OMAP4460
-  compatible = "ti,omap4460", "ti,omap4"
-
-- OMAP5430
-  compatible = "ti,omap5430", "ti,omap5"
-- OMAP5432
-  compatible = "ti,omap5432", "ti,omap5"
-
 - DRA762
   compatible = "ti,dra762", "ti,dra7"
 
@@ -116,62 +82,6 @@ SoCs:
 
 Boards (incomplete list of examples):
 
-- OMAP3 BeagleBoard : Low cost community board
-  compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
-
-- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
-
-- OMAP4 SDP : Software Development Board
-  compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"
-
-- OMAP4 PandaBoard : Low cost community board
-  compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"
-
-- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
-  compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-- OMAP4 VAR-STK-OM44 : Commercial dev kit with VAR-OM44CustomBoard and VAR-SOM-OM44 w/WLAN
-  compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-- OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD touchscreen
-  compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
-  compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3"
-
-- AM335X EVM : Software Development Board for AM335x
-  compatible = "ti,am335x-evm", "ti,am33xx"
-
-- AM335X Bone : Low cost community board
-  compatible = "ti,am335x-bone", "ti,am33xx"
-
-- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.
-  compatible = "ti,am3359-icev2", "ti,am33xx"
-
-- AM335X OrionLXm : Substation Automation Platform
-  compatible = "novatech,am335x-lxm", "ti,am33xx"
-
-- AM335X phyBOARD-WEGA: Single Board Computer dev kit
-  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
-
-- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
-  compatible = "compulab,cm-t335", "ti,am33xx"
-
-- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4
-  compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"
-
-- AM335X phyCORE-AM335x: Development kit
-  compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"
-
-- AM335x phyBOARD-REGOR: Single Board Computer
-  compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"
-
-- AM335X UC-8100-ME-T: Communication-centric industrial computing platform
-  compatible = "moxa,uc-8100-me-t", "ti,am33xx";
-
-- OMAP5 EVM : Evaluation Module
-  compatible = "ti,omap5-evm", "ti,omap5"
 
 - AM437x CM-T43
   compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
@@ -214,9 +124,3 @@ Boards (incomplete list of examples):
 
 - DRA718 EVM: Software Development Board for DRA718
   compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
-
-- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
-  compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
-
-- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
-  compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 3eb6d7afff14..431ef8c56a13 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -31,12 +31,17 @@ Required properties:
 		(base address and length)
 - clocks:	clocks for this module
 - clockdomains:	clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
 
 Example:
 
-cm: cm@48004000 {
+cm: clock@48004000 {
 	compatible = "ti,omap3-cm";
 	reg = <0x48004000 0x4000>;
+	#clock-cells = <0>;
+	clock-output-names = "cm";
 
 	cm_clocks: clocks {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt
deleted file mode 100644
index ac64e60f99f1..000000000000
--- a/Documentation/devicetree/bindings/arm/oxnas.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Oxford Semiconductor OXNAS SoCs Family device tree bindings
--------------------------------------------
-
-Boards with the OX810SE SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox810se"
-
-Boards with the OX820 SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox820"
-
-Board compatible values:
-  - "wd,mbwe" (OX810SE)
-  - "cloudengines,pogoplugv3" (OX820)
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index e17ac049e890..f47baaefcdac 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -20,10 +20,18 @@ properties:
     items:
       - enum:
           - apm,potenza-pmu
+          - apple,avalanche-pmu
+          - apple,blizzard-pmu
+          - apple,firestorm-pmu
+          - apple,icestorm-pmu
           - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
           - arm,arm1176-pmu
           - arm,arm11mpcore-pmu
+          - arm,c1-nano-pmu
+          - arm,c1-premium-pmu
+          - arm,c1-pro-pmu
+          - arm,c1-ultra-pmu
           - arm,cortex-a5-pmu
           - arm,cortex-a7-pmu
           - arm,cortex-a8-pmu
@@ -44,13 +52,37 @@ properties:
           - arm,cortex-a76-pmu
           - arm,cortex-a77-pmu
           - arm,cortex-a78-pmu
+          - arm,cortex-a320-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a520-pmu
+          - arm,cortex-a520ae-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-a715-pmu
+          - arm,cortex-a720-pmu
+          - arm,cortex-a720ae-pmu
+          - arm,cortex-a725-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
+          - arm,cortex-x3-pmu
+          - arm,cortex-x4-pmu
+          - arm,cortex-x925-pmu
           - arm,neoverse-e1-pmu
           - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-n3-pmu
+          - arm,neoverse-v1-pmu
+          - arm,neoverse-v2-pmu
+          - arm,neoverse-v3-pmu
+          - arm,neoverse-v3ae-pmu
+          - arm,rainier-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
           - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
+          - samsung,mongoose-pmu
 
   interrupts:
     # Don't know how many CPUs, so no constraints to specify
@@ -58,6 +90,8 @@ properties:
 
   interrupt-affinity:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       When using SPIs, specifies a list of phandles to CPU
       nodes corresponding directly to the affinity of
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 8b77cf83a095..6e2e0c551841 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -43,29 +43,24 @@ properties:
 
       - description:
           For implementations complying to PSCI 0.2.
-        const: arm,psci-0.2
-
-      - description:
-          For implementations complying to PSCI 0.2.
           Function IDs are not required and should be ignored by an OS with
           PSCI 0.2 support, but are permitted to be present for compatibility
           with existing software when "arm,psci" is later in the compatible
           list.
+        minItems: 1
         items:
           - const: arm,psci-0.2
           - const: arm,psci
 
       - description:
           For implementations complying to PSCI 1.0.
-        const: arm,psci-1.0
-
-      - description:
-          For implementations complying to PSCI 1.0.
           PSCI 1.0 is backward compatible with PSCI 0.2 with minor
           specification updates, as defined in the PSCI specification[2].
+        minItems: 1
         items:
           - const: arm,psci-1.0
           - const: arm,psci-0.2
+          - const: arm,psci
 
   method:
     description: The method of calling the PSCI firmware.
@@ -101,11 +96,12 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.yaml
+        Documentation/devicetree/bindings/cpu/idle-states.yaml
 
 patternProperties:
   "^power-domain-":
-    $ref: "../power/power-domain.yaml#"
+    $ref: /schemas/power/power-domain.yaml#
+    unevaluatedProperties: false
 
     type: object
     description: |
@@ -167,7 +163,6 @@ examples:
       method          = "smc";
     };
 
-
   - |+
 
     // Case 3: PSCI v0.2 and PSCI v0.1.
@@ -195,27 +190,27 @@ examples:
       #size-cells = <0>;
       #address-cells = <1>;
 
-      CPU0: cpu@0 {
+      cpu@0 {
         device_type = "cpu";
         compatible = "arm,cortex-a53";
         reg = <0x0>;
         enable-method = "psci";
-        power-domains = <&CPU_PD0>;
+        power-domains = <&cpu_pd0>;
         power-domain-names = "psci";
       };
 
-      CPU1: cpu@1 {
+      cpu@1 {
         device_type = "cpu";
         compatible = "arm,cortex-a53";
         reg = <0x100>;
         enable-method = "psci";
-        power-domains = <&CPU_PD1>;
+        power-domains = <&cpu_pd1>;
         power-domain-names = "psci";
       };
 
       idle-states {
 
-        CPU_PWRDN: cpu-power-down {
+        cpu_pwrdn: cpu-power-down {
           compatible = "arm,idle-state";
           arm,psci-suspend-param = <0x0000001>;
           entry-latency-us = <10>;
@@ -226,7 +221,7 @@ examples:
 
       domain-idle-states {
 
-        CLUSTER_RET: cluster-retention {
+        cluster_ret: cluster-retention {
           compatible = "domain-idle-state";
           arm,psci-suspend-param = <0x1000011>;
           entry-latency-us = <500>;
@@ -234,7 +229,7 @@ examples:
           min-residency-us = <2000>;
         };
 
-        CLUSTER_PWRDN: cluster-power-down {
+        cluster_pwrdn: cluster-power-down {
           compatible = "domain-idle-state";
           arm,psci-suspend-param = <0x1000031>;
           entry-latency-us = <2000>;
@@ -248,21 +243,21 @@ examples:
       compatible = "arm,psci-1.0";
       method = "smc";
 
-      CPU_PD0: power-domain-cpu0 {
+      cpu_pd0: power-domain-cpu0 {
         #power-domain-cells = <0>;
-        domain-idle-states = <&CPU_PWRDN>;
-        power-domains = <&CLUSTER_PD>;
+        domain-idle-states = <&cpu_pwrdn>;
+        power-domains = <&cluster_pd>;
       };
 
-      CPU_PD1: power-domain-cpu1 {
+      cpu_pd1: power-domain-cpu1 {
         #power-domain-cells = <0>;
-        domain-idle-states =  <&CPU_PWRDN>;
-        power-domains = <&CLUSTER_PD>;
+        domain-idle-states =  <&cpu_pwrdn>;
+        power-domains = <&cluster_pd>;
       };
 
-      CLUSTER_PD: power-domain-cluster {
+      cluster_pd: power-domain-cluster {
         #power-domain-cells = <0>;
-        domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+        domain-idle-states = <&cluster_ret>, <&cluster_pwrdn>;
       };
     };
 ...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
new file mode 100644
index 000000000000..c969c16c21ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-ctcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight TMC Control Unit
+
+maintainers:
+  - Yuanfang Zhang <quic_yuanfang@quicinc.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Jie Gan <quic_jiegan@quicinc.com>
+
+description: |
+  The Trace Memory Controller(TMC) is used for Embedded Trace Buffer(ETB),
+  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) configurations.
+  The configuration mode (ETB, ETF, ETR) is discovered at boot time when
+  the device is probed.
+
+  The Coresight TMC Control unit controls various Coresight behaviors.
+  It works as a helper device when connected to TMC ETR device.
+  It is responsible for controlling the data filter function based on
+  the source device's Trace ID for TMC ETR device. The trace data with
+  that Trace id can get into ETR's buffer while other trace data gets
+  ignored.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-ctcu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-1])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - in-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    ctcu@1001000 {
+        compatible = "qcom,sa8775p-ctcu";
+        reg = <0x1001000 0x1000>;
+
+        clocks = <&aoss_qmp>;
+        clock-names = "apb";
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                ctcu_in_port0: endpoint {
+                    remote-endpoint = <&etr0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                ctcu_in_port1: endpoint {
+                    remote-endpoint = <&etr1_out_port>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml
new file mode 100644
index 000000000000..ffe613efeabe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell)
+
+maintainers:
+  - Jinlong Mao <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+description:
+  Support for ETM trace collection on remote processor using coresight
+  framework. Enabling this will allow turning on ETM tracing on remote
+  processor like modem processor via sysfs and collecting the trace
+  via coresight TMC sinks.
+
+properties:
+  compatible:
+    const: qcom,coresight-remote-etm
+
+  label:
+    description:
+      Description of a coresight device.
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    etm {
+        compatible = "qcom,coresight-remote-etm";
+
+        out-ports {
+            port {
+                modem_etm0_out_funnel_modem: endpoint {
+                    remote-endpoint = <&funnel_modem_in_modem_etm0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tnoc.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tnoc.yaml
new file mode 100644
index 000000000000..9d1c93a9ade3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tnoc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tnoc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Trace Network On Chip - TNOC
+
+maintainers:
+  - Yuanfang Zhang <quic_yuanfang@quicinc.com>
+
+description: >
+  The Trace Network On Chip (TNOC) is an integration hierarchy hardware
+  component that integrates the functionalities of TPDA and funnels.
+
+  It sits in the different subsystem of SOC and aggregates the trace and
+  transports it to Aggregation TNOC or to coresight trace sink eventually.
+  TNOC embeds bridges for all the interfaces APB, ATB, TPDA and NTS (Narrow
+  Time Stamp).
+
+  TNOC can take inputs from different trace sources i.e. ATB, TPDM.
+
+  Note this binding is specifically intended for Aggregator TNOC instances.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tnoc
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tn(@[0-9a-f]+)$"
+
+  compatible:
+    items:
+      - const: qcom,coresight-tnoc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: APB register access clock
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-9a-f]{1,2})?$':
+        description: Input connections from CoreSight Trace Bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description:
+          Output connection to CoreSight Trace Bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    tn@109ab000  {
+      compatible = "qcom,coresight-tnoc", "arm,primecell";
+      reg = <0x109ab000 0x4200>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      in-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          tn_ag_in_tpdm_gcc: endpoint {
+            remote-endpoint = <&tpdm_gcc_out_tn_ag>;
+          };
+        };
+      };
+
+      out-ports {
+        port {
+          tn_ag_out_funnel_in1: endpoint {
+            remote-endpoint = <&funnel_in1_in_tn_ag>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
new file mode 100644
index 000000000000..a48c9ac3eaa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Aggregator - TPDA
+
+description: |
+  TPDAs are responsible for packetization and timestamping of data sets
+  utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
+  more attached TPDM and pushing the resultant (packetized) data out a
+  master ATB interface. Performing an arbitrated ATB interleaving (funneling)
+  task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
+
+  There is no strict binding between TPDM and TPDA. TPDA can have multiple
+  TPDMs connect to it. But There must be only one TPDA in the path from the
+  TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
+  connect to funnel which will connect to TPDA's inport.
+
+  We can use the commands are similar to the below to validate TPDMs.
+  Enable coresight sink first.
+
+  echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+  echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+  echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+  echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+  The test data will be collected in the coresight sink which is enabled.
+  If rwp register of the sink is keeping updating when do integration_test
+  (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
+  to sink.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpda
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpda(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpda
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  label:
+    description:
+      Description of a coresight device.
+
+  in-ports:
+    description: |
+      Input connections from TPDM to TPDA
+    $ref: /schemas/graph.yaml#/properties/ports
+
+  out-ports:
+    description: |
+      Output connections from the TPDA to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description:
+          Output connection from the TPDA to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # minimum tpda definition.
+  - |
+    tpda@6004000 {
+      compatible = "qcom,coresight-tpda", "arm,primecell";
+      reg = <0x6004000 0x1000>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      in-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          tpda_qdss_0_in_tpdm_dcc: endpoint {
+            remote-endpoint = <&tpdm_dcc_out_tpda_qdss_0>;
+          };
+        };
+      };
+
+      out-ports {
+        port {
+          tpda_qdss_out_funnel_in0: endpoint {
+            remote-endpoint = <&funnel_in0_in_tpda_qdss>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
new file mode 100644
index 000000000000..c349306f0d52
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Monitor - TPDM
+
+description: |
+  The TPDM or Monitor serves as data collection component for various dataset
+  types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
+  Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
+  Single Bit (DSB). It performs data collection in the data producing clock
+  domain and transfers it to the data collection time domain, generally ATB
+  clock domain.
+
+  The primary use case of the TPDM is to collect data from different data
+  sources and send it to a TPDA for packetization, timestamping, and funneling.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpdm
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpdm(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,coresight-static-tpdm
+      - items:
+          - const: qcom,coresight-tpdm
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  qcom,dsb-element-bits:
+    description:
+      Specifies the DSB(Discrete Single Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. DSB element size currently only supports 32-bit and 64-bit.
+    enum: [32, 64]
+
+  qcom,cmb-element-bits:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    enum: [8, 32, 64]
+
+  qcom,dsb-msrs-num:
+    description:
+      Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
+      registers supported by the monitor. If this property is not configured
+      or set to 0, it means this DSB TPDM doesn't support MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
+  label:
+    description:
+      Description of a coresight device.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  out-ports:
+    description: |
+      Output connections from the TPDM to coresight funnel/TPDA.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the TPDM to coresight
+            funnel/TPDA.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # minimum TPDM definition. TPDM connect to coresight TPDA.
+  - |
+    tpdm@684c000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x0684c000 0x1000>;
+
+      qcom,dsb-element-bits = <32>;
+      qcom,dsb-msrs-num = <16>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_prng_out_tpda_qdss: endpoint {
+            remote-endpoint =
+              <&tpda_qdss_in_tpdm_prng>;
+          };
+        };
+      };
+    };
+
+    tpdm@6c29000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-bits = <64>;
+      qcom,cmb-msrs-num = <32>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint = <&funnel_center_in_tpdm_ipcc>;
+          };
+        };
+      };
+    };
+
+    turing-llm-tpdm {
+      compatible = "qcom,coresight-static-tpdm";
+
+      qcom,cmb-element-bits = <32>;
+
+      out-ports {
+        port {
+         turing_llm_tpdm_out: endpoint {
+           remote-endpoint = <&turing0_funnel_in1>;
+         };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
new file mode 100644
index 000000000000..27261039d56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC compatibles naming convention
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    qcom,SoC-IP
+
+  For example::
+   qcom,sdm845-llcc-bwmon
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      oneOf:
+        - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sar|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
+        - pattern: "^qcom,.*(glymur|milos).*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # Preferred naming style for compatibles of SoC components:
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+(pro)?-.*$"
+      - pattern: "^qcom,sar[0-9]+[a-z]?-.*$"
+      - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+      - pattern: "^qcom,(glymur|milos)-.*$"
+
+      # Legacy namings - variations of existing patterns/compatibles are OK,
+      # but do not add completely new entries to these:
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1[ep])[0-9]+.*$"
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,gpucc-sdm630
+          - qcom,gpucc-sdm660
+          - qcom,lcc-apq8064
+          - qcom,lcc-ipq8064
+          - qcom,lcc-mdm9615
+          - qcom,lcc-msm8960
+          - qcom,lpass-cpu-apq8016
+          - qcom,usb-ss-ipq4019-phy
+          - qcom,usb-hs-ipq4019-phy
+          - qcom,vqmmc-ipq4019-regulator
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - qcom,ipq806x-gmac
+          - qcom,ipq806x-nand
+          - qcom,ipq806x-sata-phy
+          - qcom,ipq806x-usb-phy-ss
+          - qcom,ipq806x-usb-phy-hs
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index c8808e0f9e64..d84bd3bca201 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -4,86 +4,16 @@
 $id: http://devicetree.org/schemas/arm/qcom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: QCOM device tree bindings
+title: QCOM
 
 maintainers:
-  - Stephen Boyd <sboyd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Some qcom based bootloaders identify the dtb blob based on a set of
-  device properties like SoC and platform and revisions of those components.
-  To support this scheme, we encode this information into the board compatible
-  string.
-
-  Each board must specify a top-level board compatible string with the following
-  format:
-
-  	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
-
-  The 'SoC' and 'board' elements are required. All other elements are optional.
-
-  The 'SoC' element must be one of the following strings:
-
-        apq8016
-        apq8026
-        apq8074
-        apq8084
-        apq8096
-        ipq6018
-        ipq8074
-        mdm9615
-        msm8226
-        msm8916
-        msm8974
-        msm8992
-        msm8994
-        msm8996
-        sa8155p
-        sc7180
-        sc7280
-        sdm630
-        sdm660
-        sdm845
-        sdx55
-        sdx65
-        sm7225
-        sm8150
-        sm8250
-        sm8350
-
-  The 'board' element must be one of the following strings:
-
-        adp
-        cdp
-        cp01-c1
-        dragonboard
-        hk01
-        hk10-c1
-        hk10-c2
-        idp
-        liquid
-        mtp
-        qrd
-        sbc
-
-  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
-  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
-  as v1. If all versions of the 'board_version' elements match, then a
-  wildcard '*' should be used, e.g. 'v*'.
-
-  The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
-
-  Examples:
-
-  	"qcom,msm8916-v1-cdp-pm8916-v2.1"
-
-  A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
-  2.1.
-
-  	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
-
-  A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
-  foundry 2.
+  There are many devices in the list below that run the standard ChromeOS
+  bootloader setup and use the open source depthcharge bootloader to boot the
+  OS. These devices use the bootflow explained at
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
   $nodename:
@@ -93,11 +23,16 @@ properties:
       - items:
           - enum:
               - qcom,apq8016-sbc
+              - schneider,apq8016-hmibsc
           - const: qcom,apq8016
 
       - items:
           - enum:
+              - asus,sparrow
+              - huawei,sturgeon
               - lg,lenok
+              - samsung,matisse-wifi
+              - samsung,milletwifi
           - const: qcom,apq8026
 
       - items:
@@ -128,50 +63,219 @@ properties:
 
       - items:
           - enum:
+              - microsoft,dempsey
+              - microsoft,makepeace
+              - microsoft,moneypenny
+              - motorola,falcon
+              - samsung,ms013g
               - samsung,s3ve3g
           - const: qcom,msm8226
 
       - items:
           - enum:
+              - htc,memul
+              - microsoft,superman-lte
+              - microsoft,tesla
+              - motorola,peregrine
+              - samsung,matisselte
+          - const: qcom,msm8926
+          - const: qcom,msm8226
+
+      - items:
+          - enum:
+              - wingtech,wt82918hd
+          - const: qcom,msm8929
+
+      - items:
+          - enum:
+              - asus,z00t
+              - huawei,kiwi
+              - longcheer,l9100
+              - samsung,a7
+              - sony,kanuti-tulip
+              - square,apq8039-t2
+              - wingtech,wt82918
+              - wingtech,wt82918hdhw39
+          - const: qcom,msm8939
+
+      - items:
+          - enum:
+              - sony,kugo-row
+              - sony,suzu-row
+          - const: qcom,msm8956
+
+      - items:
+          - enum:
               - qcom,msm8960-cdp
+              - samsung,expressatt
+          - const: qcom,msm8960
+
+      - items:
+          - enum:
+              - sony,huashan
+          - const: qcom,msm8960t
           - const: qcom,msm8960
 
       - items:
           - enum:
-              - fairphone,fp2
               - lge,hammerhead
-              - samsung,klte
+              - samsung,hlte
               - sony,xperia-amami
-              - sony,xperia-castor
               - sony,xperia-honami
+              - sony,xperia-togari
           - const: qcom,msm8974
 
       - items:
           - enum:
-              - alcatel,idol347
-          - const: qcom,msm8916-mtp/1
-          - const: qcom,msm8916-mtp
-          - const: qcom,msm8916
+              - fairphone,fp2
+              - htc,m8
+              - oneplus,bacon
+              - samsung,klte
+              - sony,xperia-aries
+              - sony,xperia-castor
+              - sony,xperia-leo
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
+
+      - items:
+          - enum:
+              - samsung,kltechn
+          - const: samsung,klte
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
+
+      - items:
+          - enum:
+              - longcheer,l9360
+          - const: qcom,msm8976
 
       - items:
           - enum:
+              - acer,a1-724
+              - alcatel,idol347
+              - asus,z00l
+              - gplus,fl8005a
+              - huawei,g7
+              - lg,c50
+              - lg,m216
+              - longcheer,l8910
               - longcheer,l8150
+              - motorola,harpia
+              - motorola,osprey
+              - motorola,surnia
+              - qcom,msm8916-mtp
               - samsung,a3u-eur
               - samsung,a5u-eur
+              - samsung,e5
+              - samsung,e7
+              - samsung,fortuna3g
+              - samsung,gprimeltecan
+              - samsung,grandmax
+              - samsung,grandprimelte
+              - samsung,gt510
+              - samsung,gt58
+              - samsung,j3ltetw
+              - samsung,j5
+              - samsung,j5x
+              - samsung,rossa
+              - samsung,serranove
+              - thwc,uf896
+              - thwc,ufi001c
+              - wingtech,wt86518
+              - wingtech,wt86528
+              - wingtech,wt88047
+              - yiming,uz801-v3
           - const: qcom,msm8916
 
       - items:
           - enum:
+              - xiaomi,riva
+          - const: qcom,msm8917
+
+      - items:
+          - enum:
+              - xiaomi,land
+          - const: qcom,msm8937
+
+      - items:
+          - enum:
+              - flipkart,rimob
+              - motorola,potter
+              - xiaomi,daisy
+              - xiaomi,mido
+              - xiaomi,tissot
+              - xiaomi,vince
+          - const: qcom,msm8953
+
+      - items:
+          - enum:
+              - lg,bullhead
+              - lg,h815
+              - microsoft,talkman
+              - xiaomi,libra
+          - const: qcom,msm8992
+
+      - items:
+          - enum:
               - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
+              - huawei,angler
+              - microsoft,cityman
+              - sony,ivy-row
               - sony,karin-row
               - sony,satsuki-row
               - sony,sumire-row
               - sony,suzuran-row
-              - qcom,msm8994
-          - const: qcom,apq8094
+          - const: qcom,msm8994
+
+      - items:
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
 
       - items:
-          - const: qcom,msm8996-mtp
+          - enum:
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - xiaomi,natrium
+              - xiaomi,scorpio
+          - const: qcom,msm8996pro
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - asus,novago-tp370ql
+              - fxtec,pro1
+              - hp,envy-x2
+              - lenovo,miix-630
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - qcom,msm8998-mtp
+              - sony,xperia-lilac
+              - sony,xperia-maple
+              - sony,xperia-poplar
+              - xiaomi,sagit
+          - const: qcom,msm8998
+
+      - items:
+          - enum:
+              - 8dev,jalapeno
+              - alfa-network,ap120c-ac
+          - const: qcom,ipq4018
 
       - items:
           - enum:
@@ -184,6 +288,26 @@ properties:
 
       - items:
           - enum:
+              - qcom,ipq5018-rdp432-c2
+              - tplink,archer-ax55-v1
+          - const: qcom,ipq5018
+
+      - items:
+          - enum:
+              - qcom,ipq5332-ap-mi01.2
+              - qcom,ipq5332-ap-mi01.3
+              - qcom,ipq5332-ap-mi01.6
+              - qcom,ipq5332-ap-mi01.9
+          - const: qcom,ipq5332
+
+      - items:
+          - enum:
+              - qcom,ipq5424-rdp466
+          - const: qcom,ipq5424
+
+      - items:
+          - enum:
+              - mikrotik,rb3011
               - qcom,ipq8064-ap148
           - const: qcom,ipq8064
 
@@ -196,16 +320,506 @@ properties:
 
       - items:
           - enum:
+              - qcom,ipq9574-ap-al02-c2
+              - qcom,ipq9574-ap-al02-c6
+              - qcom,ipq9574-ap-al02-c7
+              - qcom,ipq9574-ap-al02-c8
+              - qcom,ipq9574-ap-al02-c9
+          - const: qcom,ipq9574
+
+      - description: Sierra Wireless MangOH Green with WP8548 Module
+        items:
+          - const: swir,mangoh-green-wp8548
+          - const: swir,wp8548
+          - const: qcom,mdm9615
+
+      - description: Qualcomm Technologies, Inc. Robotics RB1
+        items:
+          - enum:
+              - qcom,qrb2210-rb1
+          - const: qcom,qrb2210
+          - const: qcom,qcm2290
+
+      - items:
+          - enum:
+              - fairphone,fp5
+              - particle,tachyon
+              - qcom,qcm6490-idp
+              - qcom,qcs6490-rb3gen2
+              - radxa,dragon-q6a
+              - shift,otter
+          - const: qcom,qcm6490
+
+      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qdu1000-idp
+              - qcom,qdu1000-x100
+          - const: qcom,qdu1000
+
+      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qru1000-idp
+          - const: qcom,qru1000
+
+      - description: Qualcomm AR2 Gen1 platform
+        items:
+          - enum:
+              - qcom,qar2130p
+          - const: qcom,sar2130p
+
+      - items:
+          - enum:
+              - acer,aspire1
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
+      - description: HP Chromebook x2 11c (rev1 - 2)
+        items:
+          - const: google,coachz-rev1
+          - const: google,coachz-rev2
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (newest rev)
+        items:
+          - const: google,coachz
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+        items:
+          - const: google,coachz-rev1-sku0
+          - const: google,coachz-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (newest rev)
+        items:
+          - const: google,coachz-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev2)
+        items:
+          - const: google,homestar-rev2
+          - const: google,homestar-rev23
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev3)
+        items:
+          - const: google,homestar-rev3
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (newest rev)
+        items:
+          - const: google,homestar
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (rev0)
+        items:
+          - const: google,kingoftown-rev0
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (newest rev)
+        items:
+          - const: google,kingoftown
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev0)
+        items:
+          - const: google,lazor-rev0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev1 - 2)
+        items:
+          - const: google,lazor-rev1
+          - const: google,lazor-rev2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev3 - 8)
+        items:
+          - const: google,lazor-rev3
+          - const: google,lazor-rev4
+          - const: google,lazor-rev5
+          - const: google,lazor-rev6
+          - const: google,lazor-rev7
+          - const: google,lazor-rev8
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev9)
+        items:
+          - const: google,lazor-rev9
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (newest rev)
+        items:
+          - const: google,lazor
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku2
+          - const: google,lazor-rev2-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku2
+          - const: google,lazor-rev4-sku2
+          - const: google,lazor-rev5-sku2
+          - const: google,lazor-rev6-sku2
+          - const: google,lazor-rev7-sku2
+          - const: google,lazor-rev8-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev9)
+        items:
+          - const: google,lazor-rev9-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+        items:
+          - const: google,lazor-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku0
+          - const: google,lazor-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku0
+          - const: google,lazor-rev4-sku0
+          - const: google,lazor-rev5-sku0
+          - const: google,lazor-rev6-sku0
+          - const: google,lazor-rev7-sku0
+          - const: google,lazor-rev8-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev9)
+        items:
+          - const: google,lazor-rev9-sku0
+          - const: google,lazor-rev9-sku10
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (newest rev)
+        items:
+          - const: google,lazor-sku0
+          - const: google,lazor-sku10
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev4 - rev8)
+        items:
+          - const: google,lazor-rev4-sku4
+          - const: google,lazor-rev5-sku4
+          - const: google,lazor-rev6-sku4
+          - const: google,lazor-rev7-sku4
+          - const: google,lazor-rev8-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev9)
+        items:
+          - const: google,lazor-rev9-sku4
+          - const: google,lazor-rev9-sku15
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (newest rev)
+        items:
+          - const: google,lazor-sku4
+          - const: google,lazor-sku15
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev4)
+        items:
+          - const: google,lazor-rev4-sku5
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+        items:
+          - const: google,lazor-rev5-sku5
+          - const: google,lazor-rev5-sku6
+          - const: google,lazor-rev6-sku6
+          - const: google,lazor-rev7-sku6
+          - const: google,lazor-rev8-sku6
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev9)
+        items:
+          - const: google,lazor-rev9-sku6
+          - const: google,lazor-rev9-sku18
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (newest rev)
+        items:
+          - const: google,lazor-sku6
+          - const: google,lazor-sku18
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (newest rev)
+        items:
+          - const: google,mrbland-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (newest rev)
+        items:
+          - const: google,mrbland-sku1024
+          - const: google,mrbland-sku768
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with Parade (newest rev)
+        items:
+          - const: google,pazquel-sku5
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with TI (newest rev)
+        items:
+          - const: google,pazquel-sku1
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and Parade (newest rev)
+        items:
+          - const: google,pazquel-sku6
+          - const: google,pazquel-sku4
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and TI (newest rev)
+        items:
+          - const: google,pazquel-sku0
+          - const: google,pazquel-sku2
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with LTE (newest rev)
+        items:
+          - const: google,pazquel-sku22
+          - const: google,pazquel-sku20
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with WiFi (newest rev)
+        items:
+          - const: google,pazquel-sku21
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev1)
+        items:
+          - const: google,pompom-rev1
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev2)
+        items:
+          - const: google,pompom-rev2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (newest rev)
+        items:
+          - const: google,pompom
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+        items:
+          - const: google,pompom-rev1-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+        items:
+          - const: google,pompom-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+        items:
+          - const: google,pompom-sku0
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick (newest rev)
+        items:
+          - const: google,quackingstick-sku1537
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick with LTE (newest rev)
+        items:
+          - const: google,quackingstick-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Trogdor (newest rev)
+        items:
+          - const: google,trogdor
+          - const: qcom,sc7180
+
+      - description: Google Trogdor with LTE (newest rev)
+        items:
+          - const: google,trogdor-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+        items:
+          - const: google,wormdingler-sku1024
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1025
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+        items:
+          - const: google,wormdingler-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1
+          - const: qcom,sc7180
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+        items:
+          - const: qcom,sc7280-crd
+          - const: google,hoglin-rev3
+          - const: google,hoglin-rev4
+          - const: google,piglin-rev3
+          - const: google,piglin-rev4
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+        items:
+          - const: google,zoglin
+          - const: google,hoglin
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD Pro platform (newest rev)
+        items:
+          - const: google,zoglin-sku1536
+          - const: google,hoglin-sku1536
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+        items:
+          - const: qcom,sc7280-idp
+          - const: google,senor
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+        items:
+          - const: qcom,sc7280-idp2
+          - const: google,piglin
+          - const: qcom,sc7280
+
+      - description: Google Evoker (newest rev)
+        items:
+          - const: google,evoker
+          - const: qcom,sc7280
+
+      - description: Google Evoker with LTE (newest rev)
+        items:
+          - const: google,evoker-sku512
+          - const: qcom,sc7280
+
+      - description: Google Herobrine (newest rev)
+        items:
+          - const: google,herobrine
+          - const: qcom,sc7280
+
+      - description: Google Villager (rev0)
+        items:
+          - const: google,villager-rev0
+          - const: qcom,sc7280
+
+      - description: Google Villager (newest rev)
+        items:
+          - const: google,villager
+          - const: qcom,sc7280
+
+      - description: Google Villager with LTE (newest rev)
+        items:
+          - const: google,villager-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie (newest rev)
+        items:
+          - const: google,zombie
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE (newest rev)
+        items:
+          - const: google,zombie-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie with NVMe (newest rev)
+        items:
+          - const: google,zombie-sku2
+          - const: google,zombie-sku3
+          - const: google,zombie-sku515
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE and NVMe (newest rev)
+        items:
+          - const: google,zombie-sku514
+          - const: qcom,sc7280
+
       - items:
           - enum:
-              - qcom,sc7280-idp
-              - qcom,sc7280-idp2
-              - google,piglin
-              - google,senor
-          - const: qcom,sc7280
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - huawei,gaokun3
+              - lenovo,thinkpad-x13s
+              - microsoft,arcata
+              - microsoft,blackrock
+              - qcom,sc8280xp-crd
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
+      - items:
+          - enum:
+              - lenovo,tbx605f
+              - motorola,ali
+          - const: qcom,sdm450
+
+      - items:
+          - enum:
+              - sony,discovery-row
+              - sony,kirin-row
+              - sony,pioneer-row
+              - sony,voyager-row
+          - const: qcom,sdm630
+
+      - items:
+          - enum:
+              - inforce,ifc6560
+          - const: qcom,sda660
+
+      - items:
+          - enum:
+              - fairphone,fp3
+              - motorola,ocean
+          - const: qcom,sdm632
+
+      - items:
+          - enum:
+              - sony,mermaid-row
+          - const: qcom,sdm636
 
       - items:
           - enum:
@@ -214,6 +828,11 @@ properties:
 
       - items:
           - enum:
+              - google,sargo
+          - const: qcom,sdm670
+
+      - items:
+          - enum:
               - qcom,sdx55-mtp
               - qcom,sdx55-telit-fn980-tlb
               - qcom,sdx55-t55
@@ -226,37 +845,397 @@ properties:
 
       - items:
           - enum:
+              - qcom,sdx75-idp
+          - const: qcom,sdx75
+
+      - items:
+          - enum:
               - qcom,ipq6018-cp01
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
       - items:
           - enum:
+              - qcom,qcs404-evb-1000
+              - qcom,qcs404-evb-4000
+          - const: qcom,qcs404-evb
+          - const: qcom,qcs404
+
+      - items:
+          - enum:
+              - qcom,monaco-evk
+              - qcom,qcs8300-ride
+          - const: qcom,qcs8300
+
+      - items:
+          - enum:
+              - qcom,qcs615-ride
+          - const: qcom,qcs615
+          - const: qcom,sm6150
+
+      - items:
+          - enum:
               - qcom,sa8155p-adp
           - const: qcom,sa8155p
 
       - items:
           - enum:
+              - qcom,sa8295p-adp
+              - qcom,sa8540p-ride
+          - const: qcom,sa8540p
+
+      - items:
+          - enum:
+              - qcom,sa8775p-ride
+              - qcom,sa8775p-ride-r3
+          - const: qcom,sa8775p
+
+      - items:
+          - enum:
+              - qcom,lemans-evk
+              - qcom,qcs9100-ride
+              - qcom,qcs9100-ride-r3
+          - const: qcom,qcs9100
+          - const: qcom,sa8775p
+
+      - items:
+          - enum:
+              - huawei,planck
+              - lenovo,yoga-c630
+              - lg,judyln
+              - lg,judyp
+              - oneplus,enchilada
+              - oneplus,fajita
+              - qcom,sdm845-mtp
+              - shift,axolotl
+              - samsung,starqltechn
+              - samsung,w737
+              - sony,akari-row
+              - sony,akatsuki-row
+              - sony,apollo-row
+              - thundercomm,db845c
+              - xiaomi,beryllium
+              - xiaomi,beryllium-ebbg
+              - xiaomi,polaris
+          - const: qcom,sdm845
+
+      - items:
+          - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - qcom,qrb4210-rb2
+          - const: qcom,qrb4210
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - qcom,sm4450-qrd
+          - const: qcom,sm4450
+
+      - items:
+          - enum:
+              - fxtec,pro1x
+          - const: qcom,sm6115
+
+      - items:
+          - enum:
+              - lenovo,j606f
+          - const: qcom,sm6115p
+          - const: qcom,sm6115
+
+      - items:
+          - enum:
+              - sony,pdx201
+              - xiaomi,ginkgo
+              - xiaomi,laurel-sprout
+          - const: qcom,sm6125
+
+      - items:
+          - enum:
+              - sony,pdx213
+          - const: qcom,sm6350
+
+      - items:
+          - enum:
+              - sony,pdx225
+          - const: qcom,sm6375
+
+      - items:
+          - enum:
+              - xiaomi,curtana
+              - xiaomi,joyeuse
+          - const: qcom,sm7125
+
+      - items:
+          - enum:
+              - google,sunfish
+          - const: qcom,sm7150
+
+      - items:
+          - enum:
               - fairphone,fp4
           - const: qcom,sm7225
 
       - items:
           - enum:
+              - nothing,spacewar
+          - const: qcom,sm7325
+
+      - items:
+          - enum:
+              - microsoft,surface-duo
+              - qcom,sm8150-hdk
               - qcom,sm8150-mtp
+              - sony,bahamut-generic
+              - sony,griffin-generic
           - const: qcom,sm8150
 
       - items:
           - enum:
               - qcom,qrb5165-rb5
+              - qcom,sm8250-hdk
               - qcom,sm8250-mtp
+              - samsung,r8q
+              - samsung,x1q
+              - sony,pdx203-generic
+              - sony,pdx206-generic
+              - xiaomi,elish
+              - xiaomi,pipa
           - const: qcom,sm8250
 
       - items:
           - enum:
+              - microsoft,surface-duo2
               - qcom,sm8350-hdk
               - qcom,sm8350-mtp
+              - sony,pdx214-generic
+              - sony,pdx215-generic
           - const: qcom,sm8350
 
+      - items:
+          - enum:
+              - qcom,sm8450-hdk
+              - qcom,sm8450-qrd
+              - samsung,r0q
+              - sony,pdx223
+              - sony,pdx224
+          - const: qcom,sm8450
+
+      - items:
+          - enum:
+              - qcom,sm8550-hdk
+              - qcom,sm8550-mtp
+              - qcom,sm8550-qrd
+              - samsung,q5q
+              - sony,pdx234
+          - const: qcom,sm8550
+
+      - items:
+          - enum:
+              - qcom,qcs8550-aim300-aiot
+          - const: qcom,qcs8550-aim300
+          - const: qcom,qcs8550
+          - const: qcom,sm8550
+
+      - items:
+          - enum:
+              - qcom,sm8650-hdk
+              - qcom,sm8650-mtp
+              - qcom,sm8650-qrd
+          - const: qcom,sm8650
+
+      - items:
+          - enum:
+              - qcom,sm8750-mtp
+              - qcom,sm8750-qrd
+          - const: qcom,sm8750
+
+      - items:
+          - enum:
+              - qcom,x1e001de-devkit
+          - const: qcom,x1e001de
+          - const: qcom,x1e80100
+
+      - items:
+          - enum:
+              - lenovo,thinkpad-t14s-lcd
+              - lenovo,thinkpad-t14s-oled
+          - const: lenovo,thinkpad-t14s
+          - const: qcom,x1e78100
+          - const: qcom,x1e80100
+
+      - items:
+          - enum:
+              - asus,vivobook-s15
+              - asus,zenbook-a14-ux3407ra
+              - dell,inspiron-14-plus-7441
+              - dell,latitude-7455
+              - dell,xps13-9345
+              - hp,elitebook-ultra-g1q
+              - hp,omnibook-x14
+              - lenovo,yoga-slim7x
+              - microsoft,romulus13
+              - microsoft,romulus15
+              - qcom,x1e80100-crd
+              - qcom,x1e80100-qcp
+          - const: qcom,x1e80100
+
+      - items:
+          - enum:
+              - qcom,hamoa-iot-evk
+          - const: qcom,hamoa-iot-som
+          - const: qcom,x1e80100
+
+      - items:
+          - enum:
+              - asus,zenbook-a14-ux3407qa-lcd
+              - asus,zenbook-a14-ux3407qa-oled
+          - const: asus,zenbook-a14-ux3407qa
+          - const: qcom,x1p42100
+
+      - items:
+          - enum:
+              - hp,omnibook-x14-fe1
+              - lenovo,thinkbook-16
+              - qcom,x1p42100-crd
+          - const: qcom,x1p42100
+
+  # Board compatibles go above
+
+  qcom,msm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      items:
+        - description: |
+            MSM chipset ID - an exact match value consisting of two bitfields::
+             - bits 0-15  - The unique MSM chipset ID
+             - bits 16-31 - Reserved; should be 0
+        - description: |
+            Hardware revision ID - a chipset specific 32-bit ID representing
+            the version of the chipset.  It is best a match value - the
+            bootloader will look for the closest possible match.
+    deprecated: true
+    description:
+      The MSM chipset and hardware revision used Qualcomm bootloaders.  It
+      can optionally be an array of these to indicate multiple hardware that
+      use the same device tree.  It is expected that the bootloader will use
+      this information at boot-up to decide which device tree to use when given
+      multiple device trees, some of which may not be compatible with the
+      actual hardware.  It is the bootloader's responsibility to pass the
+      correct device tree to the kernel.
+      The property is deprecated.
+
+  qcom,board-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    oneOf:
+      - items:
+          - items:
+              - description: |
+                  Board ID consisting of three bitfields::
+                    - bits 31-24 - Unused
+                    - bits 23-16 - Platform Version Major
+                    - bits 15-8  - Platform Version Minor
+                    - bits 7-0   - Platform Type
+                  Platform Type field is an exact match value.  The
+                  Platform Major/Minor field is a best match.  The bootloader will
+                  look for the closest possible match.
+              - description: |
+                  Subtype ID unique to a Platform Type/Chipset ID.  For a given
+                  Platform Type, there will typically only be a single board and the
+                  subtype_id will be 0.  However in some cases board variants may
+                  need to be distinguished by different subtype_id values.
+      - items:
+          # OnePlus uses a variant of board-id with four elements:
+          - items:
+              - const: 8
+              - const: 0
+              - description: OnePlus board ID
+              - description: OnePlus subtype ID
+    deprecated: true
+    description:
+      The board type and revision information.  It can optionally be an array
+      of these to indicate multiple boards that use the same device tree.  It
+      is expected that the bootloader will use this information at boot-up to
+      decide which device tree to use when given multiple device trees, some of
+      which may not be compatible with the actual hardware.  It is the
+      bootloader's responsibility to pass the correct device tree to the
+      kernel
+      The property is deprecated.
+
+allOf:
+  # Explicit allow-list for older SoCs. The legacy properties are not allowed
+  # on newer SoCs.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8026
+              - qcom,apq8094
+              - qcom,apq8096
+              - qcom,msm8917
+              - qcom,msm8937
+              - qcom,msm8939
+              - qcom,msm8953
+              - qcom,msm8956
+              - qcom,msm8992
+              - qcom,msm8994
+              - qcom,msm8996
+              - qcom,msm8998
+              - qcom,sdm450
+              - qcom,sdm630
+              - qcom,sdm632
+              - qcom,sdm636
+              - qcom,sdm845
+              - qcom,sdx55
+              - qcom,sdx65
+              - qcom,sdx75
+              - qcom,sm4250
+              - qcom,sm6115
+              - qcom,sm6125
+              - qcom,sm6350
+              - qcom,sm7125
+              - qcom,sm7225
+              - qcom,sm8150
+              - qcom,sm8250
+    then:
+      properties:
+        qcom,board-id: true
+        qcom,msm-id: true
+    else:
+      properties:
+        qcom,board-id: false
+        qcom,msm-id: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - oneplus,enchilada
+              - oneplus,fajita
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+    then:
+      properties:
+        qcom,board-id:
+          items:
+            minItems: 4
+    else:
+      properties:
+        qcom,board-id:
+          items:
+            maxItems: 2
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml
index a5c0444aa2b4..09241ea1d228 100644
--- a/Documentation/devicetree/bindings/arm/rda.yaml
+++ b/Documentation/devicetree/bindings/arm/rda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RDA Micro platforms device tree bindings
+title: RDA Micro platforms
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
index 9fb0297fe1ce..ddd9a85099e9 100644
--- a/Documentation/devicetree/bindings/arm/realtek.yaml
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/realtek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek platforms device tree bindings
+title: Realtek platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
deleted file mode 100644
index 517206507801..000000000000
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ /dev/null
@@ -1,414 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/renesas.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
-
-maintainers:
-  - Geert Uytterhoeven <geert+renesas@glider.be>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: Emma Mobile EV2
-        items:
-          - enum:
-              - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
-          - const: renesas,emev2
-
-      - description: RZ/A1H (R7S72100)
-        items:
-          - enum:
-              - renesas,genmai # Genmai (RTK772100BC00000BR)
-              - renesas,gr-peach # GR-Peach (X28A-M01-E/F)
-              - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
-          - const: renesas,r7s72100
-
-      - description: RZ/A2 (R7S9210)
-        items:
-          - enum:
-              - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
-          - const: renesas,r7s9210
-
-      - description: SH-Mobile AG5 (R8A73A00/SH73A0)
-        items:
-          - enum:
-              - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
-          - const: renesas,sh73a0
-
-      - description: R-Mobile APE6 (R8A73A40)
-        items:
-          - enum:
-              - renesas,ape6evm
-          - const: renesas,r8a73a4
-
-      - description: R-Mobile A1 (R8A77400)
-        items:
-          - enum:
-              - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
-          - const: renesas,r8a7740
-
-      - description: RZ/G1H (R8A77420)
-        items:
-          - enum:
-              # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven)
-              - iwave,g21m
-          - const: renesas,r8a7742
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven)
-              - iwave,g21d
-          - const: iwave,g21m
-          - const: renesas,r8a7742
-
-      - description: RZ/G1M (R8A77430)
-        items:
-          - enum:
-              # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
-              - iwave,g20d
-          - const: iwave,g20m
-          - const: renesas,r8a7743
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
-              - iwave,g20m
-              - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
-          - const: renesas,r8a7743
-
-      - description: RZ/G1N (R8A77440)
-        items:
-          - enum:
-              # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
-              - iwave,g20d
-          - const: iwave,g20m
-          - const: renesas,r8a7744
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
-              - iwave,g20m
-          - const: renesas,r8a7744
-
-      - description: RZ/G1E (R8A77450)
-        items:
-          - enum:
-              - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
-              - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
-          - const: renesas,r8a7745
-
-      - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
-        items:
-          - const: iwave,g22d
-          - const: iwave,g22m
-          - const: renesas,r8a7745
-
-      - description: RZ/G1C (R8A77470)
-        items:
-          - enum:
-              - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
-          - const: renesas,r8a77470
-
-      - description: RZ/G2M (R8A774A1)
-        items:
-          - enum:
-              - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
-              - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit
-          - const: renesas,r8a774a1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2m
-          - const: renesas,r8a774a1
-
-      - description: RZ/G2N (R8A774B1)
-        items:
-          - enum:
-              - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit
-              - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform
-          - const: renesas,r8a774b1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2n
-          - const: renesas,r8a774b1
-
-      - description: RZ/G2E (R8A774C0)
-        items:
-          - enum:
-              - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
-          - const: renesas,r8a774c0
-
-      - items:
-          - enum:
-              - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
-          - const: si-linux,cat874
-          - const: renesas,r8a774c0
-
-      - description: RZ/G2H (R8A774E1)
-        items:
-          - enum:
-              - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit
-              - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
-          - const: renesas,r8a774e1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2h
-          - const: renesas,r8a774e1
-
-      - description: R-Car M1A (R8A77781)
-        items:
-          - enum:
-              - renesas,bockw
-          - const: renesas,r8a7778
-
-      - description: R-Car H1 (R8A77790)
-        items:
-          - enum:
-              - renesas,marzen # Marzen (R0P7779A00010S)
-          - const: renesas,r8a7779
-
-      - description: R-Car H2 (R8A77900)
-        items:
-          - enum:
-              - renesas,lager # Lager (RTP0RC7790SEB00010S)
-              - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
-          - const: renesas,r8a7790
-
-      - description: R-Car M2-W (R8A77910)
-        items:
-          - enum:
-              - renesas,henninger
-              - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
-              - renesas,porter # Porter (M2-LCDP)
-          - const: renesas,r8a7791
-
-      - description: R-Car V2H (R8A77920)
-        items:
-          - enum:
-              - renesas,blanche # Blanche (RTP0RC7792SEB00010S)
-              - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
-          - const: renesas,r8a7792
-
-      - description: R-Car M2-N (R8A77930)
-        items:
-          - enum:
-              - renesas,gose # Gose (RTP0RC7793SEB00010S)
-          - const: renesas,r8a7793
-
-      - description: R-Car E2 (R8A77940)
-        items:
-          - enum:
-              - renesas,alt # Alt (RTP0RC7794SEB00010S)
-              - renesas,silk # SILK (RTP0RC7794LCB00011S)
-          - const: renesas,r8a7794
-
-      - description: R-Car H3 (R8A77950)
-        items:
-          - enum:
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
-              - renesas,h3ulcb
-              - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
-          - const: renesas,r8a7795
-
-      - description: R-Car M3-W (R8A77960)
-        items:
-          - enum:
-              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
-              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
-          - const: renesas,r8a7796
-
-      - description: R-Car M3-W+ (R8A77961)
-        items:
-          - enum:
-              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
-          - const: renesas,r8a77961
-
-      - description: Kingfisher (SBEV-RCAR-KF-M03)
-        oneOf:
-          - items:
-              - const: shimafuji,kingfisher
-              - enum:
-                  - renesas,h3ulcb
-                  - renesas,m3ulcb
-                  - renesas,m3nulcb
-              - enum:
-                  - renesas,r8a7795
-                  - renesas,r8a7796
-                  - renesas,r8a77961
-                  - renesas,r8a77965
-          - items:
-              - const: shimafuji,kingfisher
-              - enum:
-                  - renesas,h3ulcb
-                  - renesas,m3ulcb
-                  - renesas,m3nulcb
-              - enum:
-                  - renesas,r8a779m0
-                  - renesas,r8a779m1
-                  - renesas,r8a779m2
-                  - renesas,r8a779m3
-                  - renesas,r8a779m4
-                  - renesas,r8a779m5
-                  - renesas,r8a779m8
-              - enum:
-                  - renesas,r8a7795
-                  - renesas,r8a77961
-                  - renesas,r8a77965
-
-      - description: R-Car M3-N (R8A77965)
-        items:
-          - enum:
-              - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
-              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
-          - const: renesas,r8a77965
-
-      - description: R-Car V3M (R8A77970)
-        items:
-          - enum:
-              - renesas,eagle # Eagle (RTP0RC77970SEB0010S)
-              - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
-          - const: renesas,r8a77970
-
-      - description: R-Car V3H (R8A77980)
-        items:
-          - enum:
-              - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
-              - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
-          - const: renesas,r8a77980
-
-      - description: R-Car E3 (R8A77990)
-        items:
-          - enum:
-              - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
-          - const: renesas,r8a77990
-
-      - description: R-Car D3 (R8A77995)
-        items:
-          - enum:
-              - renesas,draak # Draak (RTP0RC77995SEB0010S)
-          - const: renesas,r8a77995
-
-      - description: R-Car V3U (R8A779A0)
-        items:
-          - enum:
-              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
-          - const: renesas,r8a779a0
-
-      - items:
-          - enum:
-              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
-          - const: renesas,falcon-cpu
-          - const: renesas,r8a779a0
-
-      - description: R-Car H3e (R8A779M0)
-        items:
-          - enum:
-              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m0
-          - const: renesas,r8a7795
-
-      - description: R-Car H3e-2G (R8A779M1)
-        items:
-          - enum:
-              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m1
-          - const: renesas,r8a7795
-
-      - description: R-Car M3e (R8A779M2)
-        items:
-          - enum:
-              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m2
-          - const: renesas,r8a77961
-
-      - description: R-Car M3e-2G (R8A779M3)
-        items:
-          - enum:
-              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m3
-          - const: renesas,r8a77961
-
-      - description: R-Car M3Ne (R8A779M4)
-        items:
-          - enum:
-              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m4
-          - const: renesas,r8a77965
-
-      - description: R-Car M3Ne-2G (R8A779M5)
-        items:
-          - enum:
-              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m5
-          - const: renesas,r8a77965
-
-      - description: R-Car E3e (R8A779M6)
-        items:
-          - enum:
-              - renesas,ebisu       # Ebisu
-          - const: renesas,r8a779m6
-          - const: renesas,r8a77990
-
-      - description: R-Car D3e (R8A779M7)
-        items:
-          - enum:
-              - renesas,draak       # Draak
-          - const: renesas,r8a779m7
-          - const: renesas,r8a77995
-
-      - description: R-Car H3Ne (R8A779M8)
-        items:
-          - enum:
-              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m8
-          - const: renesas,r8a7795
-
-      - description: RZ/N1D (R9A06G032)
-        items:
-          - enum:
-              - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
-          - const: renesas,r9a06g032
-
-      - description: RZ/G2UL (R9A07G043)
-        items:
-          - enum:
-              - renesas,r9a07g043u11 # RZ/G2UL Type-1
-              - renesas,r9a07g043u12 # RZ/G2UL Type-2
-          - const: renesas,r9a07g043
-
-      - description: RZ/G2{L,LC} (R9A07G044)
-        items:
-          - enum:
-              - renesas,smarc-evk # SMARC EVK
-          - enum:
-              - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
-              - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
-              - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
-              - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
-          - const: renesas,r9a07g044
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 4aed16176434..d496421dbd87 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rockchip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip platforms device tree bindings
+title: Rockchip platforms
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -15,6 +15,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: 100ASK DshanPi A1 board
+        items:
+          - const: 100ask,dshanpi-a1
+          - const: rockchip,rk3576
+
       - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
         items:
           - const: vamrs,ficus
@@ -25,26 +30,93 @@ properties:
           - const: vamrs,rock960
           - const: rockchip,rk3399
 
+      - description: 9Tripod X3568 series board
+        items:
+          - enum:
+              - 9tripod,x3568-v4
+          - const: rockchip,rk3568
+
       - description: Amarula Vyasa RK3288
         items:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RK3326 Handheld Gaming Console
+        items:
+          - enum:
+              - anbernic,rg351m
+              - anbernic,rg351v
+          - const: rockchip,rk3326
+
+      - description: Anbernic RK3566 Handheld Gaming Console
+        items:
+          - enum:
+              - anbernic,rg353p
+              - anbernic,rg353ps
+              - anbernic,rg353v
+              - anbernic,rg353vs
+              - anbernic,rg503
+              - anbernic,rg-arc-d
+              - anbernic,rg-arc-s
+          - const: rockchip,rk3566
+
+      - description: Ariaboard Photonicat
+        items:
+          - const: ariaboard,photonicat
+          - const: rockchip,rk3568
+
+      - description: ArmSoM Sige1 board
+        items:
+          - const: armsom,sige1
+          - const: rockchip,rk3528
+
+      - description: ArmSoM Sige5 board
+        items:
+          - const: armsom,sige5
+          - const: rockchip,rk3576
+
+      - description: ArmSoM Sige7 board
+        items:
+          - const: armsom,sige7
+          - const: rockchip,rk3588
+
+      - description: ArmSoM LM7 SoM
+        items:
+          - enum:
+              - armsom,w3
+          - const: armsom,lm7
+          - const: rockchip,rk3588
+
       - description: Asus Tinker board
         items:
-          - const: asus,rk3288-tinker
+          - enum:
+              - asus,rk3288-tinker
+              - asus,rk3288-tinker-s
           - const: rockchip,rk3288
 
-      - description: Asus Tinker board S
+      - description: Asus Tinker Board 3/3S
         items:
-          - const: asus,rk3288-tinker-s
-          - const: rockchip,rk3288
+          - enum:
+              - asus,rk3566-tinker-board-3
+              - asus,rk3566-tinker-board-3s
+          - const: rockchip,rk3566
 
       - description: Beelink A1
         items:
           - const: azw,beelink-a1
           - const: rockchip,rk3328
 
+      - description: BigTreeTech CB2 Manta M4/8P
+        items:
+          - const: bigtreetech,cb2-manta
+          - const: bigtreetech,cb2
+          - const: rockchip,rk3566
+
+      - description: BigTreeTech Pi 2
+        items:
+          - const: bigtreetech,pi2
+          - const: rockchip,rk3566
+
       - description: bq Curie 2 tablet
         items:
           - const: mundoreader,bq-curie2
@@ -65,11 +137,54 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi Compute Module 5(CM5) EVB
+        items:
+          - enum:
+              - coolpi,pi-cm5-evb
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
+      - description: Cool Pi CM5 GenBook
+        items:
+          - enum:
+              - coolpi,pi-cm5-genbook
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
+      - description: Cool Pi 4 Model B
+        items:
+          - const: coolpi,pi-4b
+          - const: rockchip,rk3588s
+
+      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
+          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
+          - const: rockchip,rv1126
+
+      - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-6a-io  # Edgeble NCM6A-IO Board
+          - enum:
+              - edgeble,neural-compute-module-6a        # Edgeble Neural Compute Module 6A SoM
+              - edgeble,neural-compute-module-6b        # Edgeble Neural Compute Module 6B SoM
+          - const: rockchip,rk3588
+
       - description: Elgin RV1108 R1
         items:
           - const: elgin,rv1108-r1
           - const: rockchip,rv1108
 
+      - description: EmbedFire LubanCat 1
+        items:
+          - const: embedfire,lubancat-1
+          - const: rockchip,rk3566
+
+      - description: EmbedFire LubanCat 2
+        items:
+          - const: embedfire,lubancat-2
+          - const: rockchip,rk3568
+
       - description: Engicam PX30.Core C.TOUCH 2.0
         items:
           - const: engicam,px30-core-ctouch2
@@ -88,6 +203,26 @@ properties:
           - const: engicam,px30-core
           - const: rockchip,px30
 
+      - description: Firefly iCore-3588Q-based boards
+        items:
+          - enum:
+              - mntre,reform2-rcore
+          - const: firefly,icore-3588q
+          - const: rockchip,rk3588
+
+      - description: Firefly Core-3588J-based boards
+        items:
+          - enum:
+              - firefly,itx-3588j
+          - const: firefly,core-3588j
+          - const: rockchip,rk3588
+
+      - description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard
+        items:
+          - const: firefly,px30-jd4-core-mb
+          - const: firefly,px30-jd4-core
+          - const: rockchip,px30
+
       - description: Firefly Firefly-RK3288
         items:
           - enum:
@@ -133,11 +268,52 @@ properties:
               - firefly,roc-rk3399-pc-plus
           - const: rockchip,rk3399
 
-      - description: FriendlyElec NanoPi R2S
+      - description: Firefly ROC-RK3576-PC
+        items:
+          - const: firefly,roc-rk3576-pc
+          - const: rockchip,rk3576
+
+      - description: Firefly ROC-RK3588-RT
+        items:
+          - const: firefly,roc-rk3588-rt
+          - const: rockchip,rk3588
+
+      - description: Firefly Station M2
+        items:
+          - const: firefly,rk3566-roc-pc
+          - const: rockchip,rk3566
+
+      - description: Firefly Station M3
+        items:
+          - const: firefly,rk3588s-roc-pc
+          - const: rockchip,rk3588s
+
+      - description: Firefly Station P2
+        items:
+          - const: firefly,rk3568-roc-pc
+          - const: rockchip,rk3568
+
+      - description: Forlinx FET3588-C SoM
+        items:
+          - enum:
+              - forlinx,ok3588-c
+          - const: forlinx,fet3588-c
+          - const: rockchip,rk3588
+
+      - description: FriendlyElec NanoPi R2 series boards
         items:
-          - const: friendlyarm,nanopi-r2s
+          - enum:
+              - friendlyarm,nanopi-r2c
+              - friendlyarm,nanopi-r2c-plus
+              - friendlyarm,nanopi-r2s
+              - friendlyarm,nanopi-r2s-plus
           - const: rockchip,rk3328
 
+      - description: FriendlyElec NanoPi R3S
+        items:
+          - const: friendlyarm,nanopi-r3s
+          - const: rockchip,rk3566
+
       - description: FriendlyElec NanoPi4 series boards
         items:
           - enum:
@@ -146,13 +322,73 @@ properties:
               - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
               - friendlyarm,nanopi-r4s
+              - friendlyarm,nanopi-r4s-enterprise
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi M5 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-m5
+          - const: rockchip,rk3576
+
+      - description: FriendlyElec NanoPi R5 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r5c
+              - friendlyarm,nanopi-r5s
+          - const: rockchip,rk3568
+
+      - description: FriendlyElec NanoPi R6 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r6c
+              - friendlyarm,nanopi-r6s
+          - const: rockchip,rk3588s
+
+      - description: FriendlyElec NanoPi R76S
+        items:
+          - const: friendlyarm,nanopi-r76s
+          - const: rockchip,rk3576
+
+      - description: FriendlyElec NanoPi Zero2
+        items:
+          - const: friendlyarm,nanopi-zero2
+          - const: rockchip,rk3528
+
+      - description: FriendlyElec NanoPC T6 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopc-t6
+              - friendlyarm,nanopc-t6-lts
+          - const: rockchip,rk3588
+
+      - description: FriendlyElec CM3588-based boards
+        items:
+          - enum:
+              - friendlyarm,cm3588-nas
+          - const: friendlyarm,cm3588
+          - const: rockchip,rk3588
+
+      - description: GameForce Ace
+        items:
+          - const: gameforce,ace
+          - const: rockchip,rk3588s
+
+      - description: GameForce Chi
+        items:
+          - const: gameforce,chi
+          - const: rockchip,rk3326
+
       - description: GeekBuying GeekBox
         items:
           - const: geekbuying,geekbox
           - const: rockchip,rk3368
 
+      - description: Geniatech XPI-3128
+        items:
+          - const: geniatech,xpi-3128
+          - const: rockchip,rk3128
+
       - description: Google Bob (Asus Chromebook Flip C101PA)
         items:
           - const: google,bob-rev13
@@ -358,30 +594,55 @@ properties:
           - const: google,gru
           - const: rockchip,rk3399
 
-      - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10)
+      - description: |
+          Google Scarlet - Innolux display (Acer Chromebook Tab 10 and more)
         items:
+          - const: google,scarlet-rev15-sku2
+          - const: google,scarlet-rev15-sku4
           - const: google,scarlet-rev15-sku6
           - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku2
+          - const: google,scarlet-rev14-sku4
           - const: google,scarlet-rev14-sku6
           - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku2
+          - const: google,scarlet-rev13-sku4
           - const: google,scarlet-rev13-sku6
           - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku2
+          - const: google,scarlet-rev12-sku4
           - const: google,scarlet-rev12-sku6
           - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku2
+          - const: google,scarlet-rev11-sku4
           - const: google,scarlet-rev11-sku6
           - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku2
+          - const: google,scarlet-rev10-sku4
           - const: google,scarlet-rev10-sku6
           - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku2
+          - const: google,scarlet-rev9-sku4
           - const: google,scarlet-rev9-sku6
           - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku2
+          - const: google,scarlet-rev8-sku4
           - const: google,scarlet-rev8-sku6
           - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku2
+          - const: google,scarlet-rev7-sku4
           - const: google,scarlet-rev7-sku6
           - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku2
+          - const: google,scarlet-rev6-sku4
           - const: google,scarlet-rev6-sku6
           - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku2
+          - const: google,scarlet-rev5-sku4
           - const: google,scarlet-rev5-sku6
           - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku2
+          - const: google,scarlet-rev4-sku4
           - const: google,scarlet-rev4-sku6
           - const: google,scarlet-rev4
           - const: google,scarlet
@@ -417,6 +678,11 @@ properties:
           - const: google,veyron
           - const: rockchip,rk3288
 
+      - description: H96 Max V58 TV Box
+        items:
+          - const: haochuangyi,h96-max-v58
+          - const: rockchip,rk3588
+
       - description: Haoyu MarsBoard RK3066
         items:
           - const: haoyu,marsboard-rk3066
@@ -427,11 +693,48 @@ properties:
           - const: hardkernel,rk3326-odroid-go2
           - const: rockchip,rk3326
 
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid M1
+        items:
+          - const: hardkernel,odroid-m1
+          - const: rockchip,rk3568
+
+      - description: Hardkernel Odroid M1S
+        items:
+          - const: hardkernel,odroid-m1s
+          - const: rockchip,rk3566
+
+      - description: Hardkernel Odroid M2
+        items:
+          - const: hardkernel,odroid-m2
+          - const: rockchip,rk3588s
+
+      - description: HINLINK H66K / H68K
+        items:
+          - enum:
+              - hinlink,h66k
+              - hinlink,h68k
+          - const: rockchip,rk3568
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
           - const: rockchip,rk3399
 
+      - description: Indiedroid Nova SBC
+        items:
+          - const: indiedroid,nova
+          - const: rockchip,rk3588s
+
       - description: Khadas Edge series boards
         items:
           - enum:
@@ -440,6 +743,11 @@ properties:
               - khadas,edge-v
           - const: rockchip,rk3399
 
+      - description: Khadas Edge2 series boards
+        items:
+          - const: khadas,edge2
+          - const: rockchip,rk3588s
+
       - description: Kobol Helios64
         items:
           - const: kobol,helios64
@@ -455,19 +763,53 @@ properties:
           - const: leez,p710
           - const: rockchip,rk3399
 
+      - description: LCKFB Taishan Pi RK3566
+        items:
+          - const: lckfb,tspi-rk3566
+          - const: rockchip,rk3566
+
+      - description: LinkEase EasePi R1
+        items:
+          - const: linkease,easepi-r1
+          - const: rockchip,rk3568
+
+      - description: Luckfox Core3576 Module based boards
+        items:
+          - enum:
+              - luckfox,omni3576
+          - const: luckfox,core3576
+          - const: rockchip,rk3576
+
+      - description: Lunzn FastRhino R66S / R68S
+        items:
+          - enum:
+              - lunzn,fastrhino-r66s
+              - lunzn,fastrhino-r68s
+          - const: rockchip,rk3568
+
       - description: mqmaker MiQi
         items:
           - const: mqmaker,miqi
           - const: rockchip,rk3288
 
+      - description: Neardi LBA3368
+        items:
+          - const: neardi,lba3368
+          - const: rockchip,rk3368
+
       - description: Netxeon R89 board
         items:
           - const: netxeon,r89
           - const: rockchip,rk3288
 
-      - description: Orange Pi RK3399 board
+      - description: OPEN AI LAB EAIDK-610
+        items:
+          - const: openailab,eaidk-610
+          - const: rockchip,rk3399
+
+      - description: Xunlong Orange Pi RK3399 board
         items:
-          - const: rockchip,rk3399-orangepi
+          - const: xunlong,rk3399-orangepi
           - const: rockchip,rk3399
 
       - description: Phytec phyCORE-RK3288 Rapid Development Kit
@@ -476,11 +818,32 @@ properties:
           - const: phytec,rk3288-phycore-som
           - const: rockchip,rk3288
 
-      - description: Pine64 PinebookPro
+      - description: Pine64 Pinebook Pro
         items:
           - const: pine64,pinebook-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineNote
+        items:
+          - enum:
+              - pine64,pinenote-v1.1
+              - pine64,pinenote-v1.2
+          - const: pine64,pinenote
+          - const: rockchip,rk3566
+
+      - description: Pine64 PinePhone Pro
+        items:
+          - const: pine64,pinephone-pro
+          - const: rockchip,rk3399
+
+      - description: Pine64 PineTab2
+        items:
+          - enum:
+              - pine64,pinetab2-v0.1
+              - pine64,pinetab2-v2.0
+          - const: pine64,pinetab2
+          - const: rockchip,rk3566
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -494,16 +857,86 @@ properties:
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
-      - description: Pine64 Quartz64 Model A
+      - description: Pine64 Quartz64 Model A/B
+        items:
+          - enum:
+              - pine64,quartz64-a
+              - pine64,quartz64-b
+          - const: rockchip,rk3566
+
+      - description: Pine64 QuartzPro64
+        items:
+          - const: pine64,quartzpro64
+          - const: rockchip,rk3588
+
+      - description: Pine64 SOQuartz
+        items:
+          - enum:
+              - pine64,soquartz-blade
+              - pine64,soquartz-cm4io
+              - pine64,soquartz-model-a
+          - const: pine64,soquartz
+          - const: rockchip,rk3566
+
+      - description: Powkiddy RK3566 Handheld Gaming Console
         items:
-          - const: pine64,quartz64-a
+          - enum:
+              - powkiddy,rgb10max3
+              - powkiddy,rgb20sx
+              - powkiddy,rgb30
+              - powkiddy,rk2023
+              - powkiddy,x55
           - const: rockchip,rk3566
 
+      - description: Protonic MECSBC board
+        items:
+          - const: prt,mecsbc
+          - const: rockchip,rk3568
+
+      - description: QNAP TS-x33 NAS devices
+        items:
+          - enum:
+              - qnap,ts233
+              - qnap,ts433
+          - const: rockchip,rk3568
+
+      - description: Radxa Compute Module 3 (CM3)
+        items:
+          - enum:
+              - radxa,cm3-io
+          - const: radxa,cm3
+          - const: rockchip,rk3566
+
+      - description: Radxa CM3 Industrial
+        items:
+          - enum:
+              - radxa,e25
+          - const: radxa,cm3i
+          - const: rockchip,rk3568
+
+      - description: Radxa E20C
+        items:
+          - const: radxa,e20c
+          - const: rockchip,rk3528
+
+      - description: Radxa E52C
+        items:
+          - const: radxa,e52c
+          - const: rockchip,rk3582
+          - const: rockchip,rk3588s
+
       - description: Radxa Rock
         items:
           - const: radxa,rock
           - const: rockchip,rk3188
 
+      - description: Radxa ROCK 2A/2F
+        items:
+          - enum:
+              - radxa,rock-2a
+              - radxa,rock-2f
+          - const: rockchip,rk3528
+
       - description: Radxa ROCK Pi 4A/A+/B/B+/C
         items:
           - enum:
@@ -515,6 +948,21 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4C+
+        items:
+          - const: radxa,rock-4c-plus
+          - const: rockchip,rk3399
+
+      - description: Radxa ROCK 4D
+        items:
+          - const: radxa,rock-4d
+          - const: rockchip,rk3576
+
+      - description: Radxa ROCK 4SE
+        items:
+          - const: radxa,rock-4se
+          - const: rockchip,rk3399
+
       - description: Radxa ROCK Pi E
         items:
           - const: radxa,rockpi-e
@@ -532,11 +980,78 @@ properties:
           - const: vamrs,rk3399pro-vmarc-som
           - const: rockchip,rk3399pro
 
-      - description: Radxa Rock2 Square
+      - description: Radxa ROCK Pi S
+        items:
+          - const: radxa,rockpis
+          - const: rockchip,rk3308
+
+      - description: Radxa Rock 2 Square
         items:
           - const: radxa,rock2-square
           - const: rockchip,rk3288
 
+      - description: Radxa ROCK 3A
+        items:
+          - const: radxa,rock3a
+          - const: rockchip,rk3568
+
+      - description: Radxa ROCK 3B
+        items:
+          - const: radxa,rock-3b
+          - const: rockchip,rk3568
+
+      - description: Radxa ROCK 3C
+        items:
+          - const: radxa,rock-3c
+          - const: rockchip,rk3566
+
+      - description: Radxa ROCK 5 ITX
+        items:
+          - const: radxa,rock-5-itx
+          - const: rockchip,rk3588
+
+      - description: Radxa ROCK 5A
+        items:
+          - const: radxa,rock-5a
+          - const: rockchip,rk3588s
+
+      - description: Radxa ROCK 5B
+        items:
+          - const: radxa,rock-5b
+          - const: rockchip,rk3588
+
+      - description: Radxa ROCK 5B+
+        items:
+          - const: radxa,rock-5b-plus
+          - const: rockchip,rk3588
+
+      - description: Radxa ROCK 5C
+        items:
+          - const: radxa,rock-5c
+          - const: rockchip,rk3588s
+
+      - description: Radxa ROCK S0
+        items:
+          - const: radxa,rock-s0
+          - const: rockchip,rk3308
+
+      - description: Radxa ROCK 5T
+        items:
+          - const: radxa,rock-5t
+          - const: rockchip,rk3588
+
+      - description: Radxa ZERO 3W/3E
+        items:
+          - enum:
+              - radxa,zero-3e
+              - radxa,zero-3w
+          - const: rockchip,rk3566
+
+      - description: Relfor SAIB board
+        items:
+          - const: relfor,saib
+          - const: rockchip,rv1109
+
       - description: Rikomagic MK808 v1
         items:
           - const: rikomagic,mk808
@@ -574,6 +1089,11 @@ properties:
           - const: rockchip,rk3036-evb
           - const: rockchip,rk3036
 
+      - description: Rockchip RK3128 Evaluation board
+        items:
+          - const: rockchip,rk3128-evb
+          - const: rockchip,rk3128
+
       - description: Rockchip RK3228 Evaluation board
         items:
           - const: rockchip,rk3228-evb
@@ -611,6 +1131,11 @@ properties:
           - const: rockchip,rk3399-evb
           - const: rockchip,rk3399
 
+      - description: Rockchip RK3399 Industry Evaluation board
+        items:
+          - const: rockchip,rk3399-evb-ind
+          - const: rockchip,rk3399
+
       - description: Rockchip RK3399 Sapphire standalone
         items:
           - const: rockchip,rk3399-sapphire
@@ -621,11 +1146,93 @@ properties:
           - const: rockchip,rk3399-sapphire-excavator
           - const: rockchip,rk3399
 
+      - description: Rockchip RK3562 Evaluation board 2
+        items:
+          - const: rockchip,rk3562-evb2-v10
+          - const: rockchip,rk3562
+
+      - description: Rockchip RK3566 BOX Evaluation Demo board
+        items:
+          - const: rockchip,rk3566-box-demo
+          - const: rockchip,rk3566
+
+      - description: Rockchip RK3568 Evaluation board
+        items:
+          - const: rockchip,rk3568-evb1-v10
+          - const: rockchip,rk3568
+
+      - description: Rockchip RK3576 Evaluation board
+        items:
+          - const: rockchip,rk3576-evb1-v10
+          - const: rockchip,rk3576
+
+      - description: Rockchip RK3588 Evaluation board
+        items:
+          - enum:
+              - rockchip,rk3588-evb1-v10
+              - rockchip,rk3588-evb2-v10
+          - const: rockchip,rk3588
+
+      - description: Rockchip RK3588S Evaluation board
+        items:
+          - const: rockchip,rk3588s-evb1-v10
+          - const: rockchip,rk3588s
+
       - description: Rockchip RV1108 Evaluation board
         items:
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Rockchip Toybrick TB-RK3588X board
+        items:
+          - const: rockchip,rk3588-toybrick-x0
+          - const: rockchip,rk3588
+
+      - description: Sakura Pi RK3308B
+        items:
+          - const: sakurapi,rk3308-sakurapi-rk3308b
+          - const: rockchip,rk3308
+
+      - description: Sinovoip RK3308 Banana Pi P2 Pro
+        items:
+          - const: sinovoip,rk3308-bpi-p2pro
+          - const: rockchip,rk3308
+
+      - description: Sinovoip RK3568 Banana Pi R2 Pro
+        items:
+          - const: sinovoip,rk3568-bpi-r2pro
+          - const: rockchip,rk3568
+
+      - description: Sonoff iHost Smart Home Hub
+        items:
+          - const: itead,sonoff-ihost
+          - enum:
+              - rockchip,rv1126
+              - rockchip,rv1109
+
+      - description: Theobroma Systems PX30-Cobra
+        items:
+          - enum:
+              - tsd,px30-cobra-ltk050h3146w
+              - tsd,px30-cobra-ltk050h3146w-a2
+              - tsd,px30-cobra-ltk050h3148w
+              - tsd,px30-cobra-ltk500hd1829
+          - const: tsd,px30-cobra
+          - const: rockchip,px30
+
+      - description: Theobroma Systems PX30-PP1516
+        items:
+          - enum:
+              - tsd,px30-pp1516-ltk050h3146w-a2
+              - tsd,px30-pp1516-ltk050h3148w
+          - const: tsd,px30-pp1516
+          - const: rockchip,px30
+
+      - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
+        items:
+          - const: tsd,px30-ringneck-haikou
+          - const: rockchip,px30
+
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
           - const: tsd,rk3368-lion-haikou
@@ -636,21 +1243,67 @@ properties:
           - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
+      - description: Theobroma Systems RK3588-SBC Jaguar
+        items:
+          - const: tsd,rk3588-jaguar
+          - const: rockchip,rk3588
+
+      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+        items:
+          - const: tsd,rk3588-tiger-haikou
+          - const: tsd,rk3588-tiger
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
 
-      - description: Zkmagic A95X Z2
+      - description: Turing RK1
         items:
-          - const: zkmagic,a95x-z2
-          - const: rockchip,rk3318
+          - const: turing,rk1
+          - const: rockchip,rk3588
 
-      - description: Rockchip RK3568 Evaluation board
+      - description: WolfVision PF5 mainboard
         items:
-          - const: rockchip,rk3568-evb1-v10
+          - const: wolfvision,rk3568-pf5
           - const: rockchip,rk3568
 
+      - description: Xunlong Orange Pi 3B
+        items:
+          - enum:
+              - xunlong,orangepi-3b-v1.1
+              - xunlong,orangepi-3b-v2.1
+          - const: xunlong,orangepi-3b
+          - const: rockchip,rk3566
+
+      - description: Xunlong Orange Pi 5 Max/Plus/Ultra
+        items:
+          - enum:
+              - xunlong,orangepi-5-max
+              - xunlong,orangepi-5-plus
+              - xunlong,orangepi-5-ultra
+          - const: rockchip,rk3588
+
+      - description: Xunlong Orange Pi R1 Plus / LTS
+        items:
+          - enum:
+              - xunlong,orangepi-r1-plus
+              - xunlong,orangepi-r1-plus-lts
+          - const: rockchip,rk3328
+
+      - description: Xunlong Orange Pi 5
+        items:
+          - enum:
+              - xunlong,orangepi-5
+              - xunlong,orangepi-5b
+          - const: rockchip,rk3588s
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 5ece38065e54..55b2200d6e75 100644
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -21,10 +21,16 @@ select:
         enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3528-pmu
+          - rockchip,rk3562-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3576-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
 
   required:
     - compatible
@@ -35,21 +41,33 @@ properties:
       - enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3528-pmu
+          - rockchip,rk3562-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3576-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
       - const: syscon
       - const: simple-mfd
 
   reg:
     maxItems: 1
 
+  power-controller:
+    type: object
+
+  reboot-mode:
+    type: object
+
 required:
   - compatible
   - reg
 
-additionalProperties: true
+additionalProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
deleted file mode 100644
index 3b8fbf3c00c5..000000000000
--- a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ARM Dual Cluster System Configuration Block
--------------------------------------------
-
-The Dual Cluster System Configuration Block (DCSCB) provides basic
-functionality for controlling clocks, resets and configuration pins in
-the Dual Cluster System implemented by the Real-Time System Model (RTSM).
-
-Required properties:
-
-- compatible : should be "arm,rtsm,dcscb"
-
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	dcscb@60000000 {
-		compatible = "arm,rtsm,dcscb";
-		reg = <0x60000000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
deleted file mode 100644
index bfc352a2fdd6..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Chipid driver
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-properties:
-  compatible:
-    enum:
-      - samsung,exynos4210-chipid
-      - samsung,exynos850-chipid
-
-  reg:
-    maxItems: 1
-
-  samsung,asv-bin:
-    description:
-      Adaptive Supply Voltage bin selection. This can be used
-      to determine the ASV bin of an SoC if respective information
-      is missing in the CHIPID registers or in the OTP memory.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2, 3]
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    chipid@10000000 {
-        compatible = "samsung,exynos4210-chipid";
-        reg = <0x10000000 0x100>;
-        samsung,asv-bin = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
deleted file mode 100644
index 17678d9686c1..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ /dev/null
@@ -1,128 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Power Management Unit (PMU)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-          - samsung-s5pv210-pmu
-  required:
-    - compatible
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-          - samsung-s5pv210-pmu
-      - const: syscon
-
-  reg:
-    maxItems: 1
-
-  assigned-clock-parents: true
-  assigned-clocks: true
-
-  '#clock-cells':
-    const: 1
-
-  clock-names:
-    description:
-      List of clock names for particular CLKOUT mux inputs
-    minItems: 1
-    maxItems: 32
-    items:
-      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
-
-  clocks:
-    minItems: 1
-    maxItems: 32
-
-  interrupt-controller:
-    description:
-      Some PMUs are capable of behaving as an interrupt controller (mostly
-      to wake up a suspended PMU).
-
-  '#interrupt-cells':
-    description:
-      Must be identical to the that of the parent interrupt controller.
-    const: 3
-
-  syscon-poweroff:
-    $ref: "../../power/reset/syscon-poweroff.yaml#"
-    type: object
-    description:
-      Node for power off method
-
-  syscon-reboot:
-    $ref: "../../power/reset/syscon-reboot.yaml#"
-    type: object
-    description:
-      Node for reboot method
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - samsung,exynos3250-pmu
-              - samsung,exynos4210-pmu
-              - samsung,exynos4412-pmu
-              - samsung,exynos5250-pmu
-              - samsung,exynos5410-pmu
-              - samsung,exynos5420-pmu
-              - samsung,exynos5433-pmu
-    then:
-      required:
-        - '#clock-cells'
-        - clock-names
-        - clocks
-
-examples:
-  - |
-    #include <dt-bindings/clock/exynos5250.h>
-
-    pmu_system_controller: system-controller@10040000 {
-        compatible = "samsung,exynos5250-pmu", "syscon";
-        reg = <0x10040000 0x5000>;
-        interrupt-controller;
-        #interrupt-cells = <3>;
-        interrupt-parent = <&gic>;
-        #clock-cells = <1>;
-        clock-names = "clkout16";
-        clocks = <&clock CLK_FIN_PLL>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index ef6dc14be4b5..f8e20e602c20 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -14,12 +14,6 @@ properties:
     const: '/'
   compatible:
     oneOf:
-      - description: S3C2416 based boards
-        items:
-          - enum:
-              - samsung,smdk2416                # Samsung SMDK2416
-          - const: samsung,s3c2416
-
       - description: S3C6410 based boards
         items:
           - enum:
@@ -45,6 +39,12 @@ properties:
           - const: samsung,aries
           - const: samsung,s5pv210
 
+      - description: Exynos2200 based boards
+        items:
+          - enum:
+              - samsung,g0s                     # Samsung Galaxy S22+ (SM-S906B)
+          - const: samsung,exynos2200
+
       - description: Exynos3250 based boards
         items:
           - enum:
@@ -72,6 +72,16 @@ properties:
           - const: samsung,exynos4210
           - const: samsung,exynos4
 
+      - description: Samsung Galaxy Tab3 family boards
+        items:
+          - enum:
+              - samsung,t310                    # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+              - samsung,t311                    # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+              - samsung,t315                    # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+          - const: samsung,tab3
+          - const: samsung,exynos4212
+          - const: samsung,exynos4
+
       - description: Exynos4412 based boards
         items:
           - enum:
@@ -140,6 +150,8 @@ properties:
         items:
           - enum:
               - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,chagall-wifi            # Samsung SM-T800
+              - samsung,klimt-wifi              # Samsung SM-T700
               - samsung,smdk5420                # Samsung SMDK5420 eval
           - const: samsung,exynos5420
           - const: samsung,exynos5
@@ -169,6 +181,7 @@ properties:
               - hardkernel,odroid-xu3-lite      # Hardkernel Odroid XU3 Lite
               - hardkernel,odroid-xu4           # Hardkernel Odroid XU4
               - hardkernel,odroid-hc1           # Hardkernel Odroid HC1
+              - samsung,k3g                     # Samsung Galaxy S5 (SM-G900H)
           - const: samsung,exynos5800
           - const: samsung,exynos5
 
@@ -199,12 +212,59 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos7870 based boards
+        items:
+          - enum:
+              - samsung,a2corelte               # Samsung Galaxy A2 Core
+              - samsung,j6lte                   # Samsung Galaxy J6
+              - samsung,on7xelte                # Samsung Galaxy J7 Prime
+          - const: samsung,exynos7870
+
+      - description: Exynos7885 based boards
+        items:
+          - enum:
+              - samsung,jackpotlte              # Samsung Galaxy A8 (2018)
+          - const: samsung,exynos7885
+
+      - description: Exynos850 based boards
+        items:
+          - enum:
+              - winlink,e850-96                 # WinLink E850-96
+          - const: samsung,exynos850
+
+      - description: Exynos8895 based boards
+        items:
+          - enum:
+              - samsung,dreamlte                # Samsung Galaxy S8 (SM-G950F)
+          - const: samsung,exynos8895
+
+      - description: Exynos9810 based boards
+        items:
+          - enum:
+              - samsung,starlte                 # Samsung Galaxy S9 (SM-G960F)
+          - const: samsung,exynos9810
+
+      - description: Exynos990 based boards
+        items:
+          - enum:
+              - samsung,c1s                     # Samsung Galaxy Note20 5G (SM-N981B)
+              - samsung,r8s                     # Samsung Galaxy S20 FE (SM-G780F)
+              - samsung,x1s                     # Samsung Galaxy S20 5G (SM-G981B)
+              - samsung,x1slte                  # Samsung Galaxy S20 (SM-G980F)
+          - const: samsung,exynos990
+
       - description: Exynos Auto v9 based boards
         items:
           - enum:
               - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
           - const: samsung,exynosautov9
 
+      - description: Exynos Auto v920 based boards
+        items:
+          - enum:
+              - samsung,exynosautov920-sadk   # Samsung Exynos Auto v920 SADK
+          - const: samsung,exynosautov920
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
new file mode 100644
index 000000000000..653f85997643
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    samsung,SoC-IP
+
+  For example::
+    samsung,exynos5433-cmu-isp
+
+select:
+  properties:
+    compatible:
+      pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Preferred naming style for compatibles of SoC components
+        pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - samsung,exynos4x12-pinctrl
+          - samsung,exynos4x12-usb2-phy
+          - samsung,s3c64xx-pinctrl
+          - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
index aa1d4afbc510..5a428a885760 100644
--- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut platforms device tree bindings
+title: Milbeaut platforms
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
new file mode 100644
index 000000000000..72554a4f1c92
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Synquacer platform
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description:
+  Socionext SC2A11B (Synquacer) SoC based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,developer-box
+          - const: socionext,synquacer
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
index 8c0e91658474..3e7f3d927ec7 100644
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Socionext UniPhier platform device tree bindings
+title: Socionext UniPhier platform
 
 maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
@@ -26,6 +26,12 @@ properties:
               - socionext,uniphier-pro4-ref
               - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
+      - description: Pro5 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro5-epcore
+              - socionext,uniphier-pro5-proex
+          - const: socionext,uniphier-pro5
       - description: sLD8 SoC boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
deleted file mode 100644
index 46652bf65147..000000000000
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SP810 System Controller
------------------------
-
-Required properties:
-
-- compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.yaml
-		for more details
-		should be: "arm,sp810", "arm,primecell"
-
-- reg:		standard registers property, physical address and size
-		of the control registers
-
-- clock-names:	from the common clock bindings, for more details see
-		Documentation/devicetree/bindings/clock/clock-bindings.txt;
-		should be: "refclk", "timclk", "apb_pclk"
-
-- clocks:	from the common clock bindings, phandle and clock
-		specifier pairs for the entries of clock-names property
-
-- #clock-cells: from the common clock bindings;
-		should be: <1>
-
-- clock-output-names: from the common clock bindings;
-		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
-
-- assigned-clocks: from the common clock binding;
-		should be: clock specifier for each output clock of this
-		provider node
-
-- assigned-clock-parents: from the common clock binding;
-		should be: phandle of input clock listed in clocks
-		property with the highest frequency
-
-Example:
-	v2m_sysctl: sysctl@20000 {
-		compatible = "arm,sp810", "arm,primecell";
-		reg = <0x020000 0x1000>;
-		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-		clock-names = "refclk", "timclk", "apb_pclk";
-		#clock-cells = <1>;
-		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-
-	};
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 000000000000..c9094e5ec565
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp810
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp810
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: timclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: timer clock
+      - description: APB register access clock
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 4
+
+  assigned-clocks:
+    maxItems: 4
+
+  assigned-clock-parents:
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctl@20000 {
+        compatible = "arm,sp810", "arm,primecell";
+        reg = <0x020000 0x1000>;
+        clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+        clock-names = "refclk", "timclk", "apb_pclk";
+        #clock-cells = <1>;
+        clock-output-names = "timerclken0", "timerclken1",
+                             "timerclken2", "timerclken3";
+        assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+                          <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+        assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+                                 <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt
deleted file mode 100644
index 93372f2a7df9..000000000000
--- a/Documentation/devicetree/bindings/arm/spe-pmu.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
-
-ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
-performance sample data using an in-memory trace buffer.
-
-** SPE Required properties:
-
-- compatible : should be one of:
-	       "arm,statistical-profiling-extension-v1"
-
-- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
-               SPE is only supported on a subset of the CPUs, please consult
-	       the arm,gic-v3 binding for details on describing a PPI partition.
-
-** Example:
-
-spe-pmu {
-        compatible = "arm,statistical-profiling-extension-v1";
-        interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
deleted file mode 100644
index e404e2556b4a..000000000000
--- a/Documentation/devicetree/bindings/arm/spear-misc.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-SPEAr Misc configuration
-===========================
-SPEAr SOCs have some miscellaneous registers which are used to configure
-few properties of different peripheral controllers.
-
-misc node required properties:
-
-- compatible Should be	"st,spear1340-misc", "syscon".
-- reg: Address range of misc space up to 8K
diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml
index 605ad3f882ef..a465c9eca76e 100644
--- a/Documentation/devicetree/bindings/arm/spear.yaml
+++ b/Documentation/devicetree/bindings/arm/spear.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/spear.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST SPEAr Platforms Device Tree Bindings
+title: ST SPEAr Platforms
 
 maintainers:
   - Viresh Kumar <vireshk@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index 2c12e571394b..40fc3c8b9dce 100644
--- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Unisoc platforms device tree bindings
+title: Unisoc platforms
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
@@ -35,6 +35,11 @@ properties:
               - sprd,ums512-1h10
           - const: sprd,ums512
 
+      - items:
+          - enum:
+              - sprd,ums9620-2h10
+          - const: sprd,ums9620
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index a41cd8764885..177358895fe1 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -1,10 +1,10 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/arm/sti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST STi Platforms Device Tree Bindings
+title: ST STi Platforms
 
 maintainers:
   - Patrice Chotard <patrice.chotard@foss.st.com>
@@ -13,13 +13,16 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
-      - enum:
-          - st,stih415
-          - st,stih416
-          - st,stih407
-          - st,stih410
-          - st,stih418
+    oneOf:
+      - items:
+          - enum:
+              - st,stih410-b2260
+          - const: st,stih410
+      - items:
+          - enum:
+              - st,stih418-b2199
+              - st,stih418-b2264
+          - const: st,stih418
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index ecb28e90fd11..4970b9167d1c 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 ML-AHB interconnect bindings
+title: STMicroelectronics STM32 ML-AHB interconnect
 
 maintainers:
   - Fabien Dessenne <fabien.dessenne@foss.st.com>
@@ -54,19 +54,18 @@ unevaluatedProperties: false
 
 examples:
   - |
-    mlahb: ahb@38000000 {
-      compatible = "st,mlahb", "simple-bus";
-      #address-cells = <1>;
-      #size-cells = <1>;
-      reg = <0x10000000 0x40000>;
-      ranges;
-      dma-ranges = <0x00000000 0x38000000 0x10000>,
-                   <0x10000000 0x10000000 0x60000>,
-                   <0x30000000 0x30000000 0x60000>;
+    ahb {
+        compatible = "st,mlahb", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        dma-ranges = <0x00000000 0x38000000 0x10000>,
+                     <0x10000000 0x10000000 0x60000>,
+                     <0x30000000 0x30000000 0x60000>;
 
-      m4_rproc: m4@10000000 {
-       reg = <0x10000000 0x40000>;
-      };
+        m4_rproc: m4@10000000 {
+            reg = <0x10000000 0x40000>;
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 6f846d69c5e1..95d2319afe23 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Platforms System Controller bindings
+title: STMicroelectronics STM32 Platforms System Controller
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -15,11 +15,15 @@ properties:
     oneOf:
       - items:
           - enum:
-              - st,stm32mp157-syscfg
-              - st,stm32mp151-pwr-mcu
-              - st,stm32-syscfg
               - st,stm32-power-config
+              - st,stm32-syscfg
               - st,stm32-tamp
+              - st,stm32f4-gcan
+              - st,stm32mp151-pwr-mcu
+              - st,stm32mp157-syscfg
+              - st,stm32mp21-syscfg
+              - st,stm32mp23-syscfg
+              - st,stm32mp25-syscfg
           - const: syscon
       - items:
           - const: st,stm32-tamp
@@ -32,19 +36,31 @@ properties:
   clocks:
     maxItems: 1
 
+  "#clock-cells":
+    const: 0
+
 required:
   - compatible
   - reg
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - st,stm32mp157-syscfg
-then:
-  required:
-    - clocks
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp157-syscfg
+              - st,stm32f4-gcan
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          const: st,stm32mp25-syscfg
+    then:
+      required:
+        - "#clock-cells"
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index bcaf7be3ab37..ad144c02eb7e 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Platforms Device Tree Bindings
+title: STMicroelectronics STM32 Platforms
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -14,20 +14,11 @@ properties:
     const: "/"
   compatible:
     oneOf:
-      - description: DH STM32MP1 SoM based Boards
+      - description: emtrion STM32MP1 Argon based Boards
         items:
-          - enum:
-              - arrow,stm32mp157a-avenger96 # Avenger96
-              - dh,stm32mp153c-dhcom-drc02
-              - dh,stm32mp157c-dhcom-pdk2
-              - dh,stm32mp157c-dhcom-picoitx
-          - enum:
-              - dh,stm32mp153c-dhcom-som
-              - dh,stm32mp157a-dhcor-som
-              - dh,stm32mp157c-dhcom-som
-          - enum:
-              - st,stm32mp153
-              - st,stm32mp157
+          - const: emtrion,stm32mp157c-emsbc-argon
+          - const: emtrion,stm32mp157c-emstamp-argon
+          - const: st,stm32mp157
       - items:
           - enum:
               - st,stm32f429i-disco
@@ -53,30 +44,115 @@ properties:
           - const: st,stm32h743
       - items:
           - enum:
+              - st,stm32h747i-disco
+          - const: st,stm32h747
+      - items:
+          - enum:
               - st,stm32h750i-art-pi
           - const: st,stm32h750
       - items:
           - enum:
               - st,stm32mp135f-dk
           - const: st,stm32mp135
+
+      - description: ST STM32MP133 based Boards
+        items:
+          - enum:
+              - pri,prihmb   # Priva E-Measuringbox board
+          - const: st,stm32mp133
+
+      - description: ST STM32MP151 based Boards
+        items:
+          - enum:
+              - ply,plyaqm   # Plymovent AQM board
+              - prt,mecio1r0 # Protonic MECIO1r0
+              - prt,mect1s   # Protonic MECT1S
+              - prt,prtt1a   # Protonic PRTT1A
+              - prt,prtt1c   # Protonic PRTT1C
+              - prt,prtt1s   # Protonic PRTT1S
+          - const: st,stm32mp151
+
+      - description: DH STM32MP135 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp135f-dhcor-dhsbc
+          - const: dh,stm32mp135f-dhcor-som
+          - const: st,stm32mp135
+
+      - description: DH STM32MP151 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp151a-dhcor-testbench
+          - const: dh,stm32mp151a-dhcor-som
+          - const: st,stm32mp151
+
+      - description: ST STM32MP153 based Boards
+        items:
+          - enum:
+              - prt,mecio1r1   # Protonic MECIO1r1
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOM SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcom-drc02
+          - const: dh,stm32mp153c-dhcom-som
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcor-drc-compact
+          - const: dh,stm32mp153c-dhcor-som
+          - const: st,stm32mp153
+
+      - description: Octavo OSD32MP153 System-in-Package based boards
+        items:
+          - enum:
+              - lxa,stm32mp153c-fairytux2-gen1 # Linux Automation FairyTux 2 (Generation 1)
+              - lxa,stm32mp153c-fairytux2-gen2 # Linux Automation FairyTux 2 (Generation 2)
+              - lxa,stm32mp153c-tac-gen3 # Linux Automation TAC (Generation 3)
+          - const: oct,stm32mp153x-osd32
+          - const: st,stm32mp153
+
       - items:
           - enum:
               - shiratech,stm32mp157a-iot-box # IoT Box
               - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
+              - st,stm32mp157c-ed1-scmi
               - st,stm32mp157a-dk1
+              - st,stm32mp157a-dk1-scmi
               - st,stm32mp157c-dk2
-
+              - st,stm32mp157c-dk2-scmi
+              - st,stm32mp157f-dk2
           - const: st,stm32mp157
+
       - items:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1-scmi
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - arrow,stm32mp157a-avenger96 # Avenger96
+          - const: dh,stm32mp157a-dhcor-som
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - dh,stm32mp157c-dhcom-pdk2
+              - dh,stm32mp157c-dhcom-picoitx
+          - const: dh,stm32mp157c-dhcom-som
+          - const: st,stm32mp157
 
       - description: Engicam i.Core STM32MP1 SoM based Boards
         items:
           - enum:
               - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
               - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
           - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
           - const: st,stm32mp157
@@ -92,10 +168,14 @@ properties:
       - description: Octavo OSD32MP15x System-in-Package based boards
         items:
           - enum:
-              - lxa,stm32mp157c-mc1 # Linux Automation MC-1
+              - lxa,stm32mp157c-mc1      # Linux Automation MC-1
+              - lxa,stm32mp157c-tac-gen1 # Linux Automation TAC (Generation 1)
+              - lxa,stm32mp157c-tac-gen2 # Linux Automation TAC (Generation 2)
+              - oct,stm32mp157c-osd32-red # Octavo OSD32MP1 RED board
           - const: oct,stm32mp15xx-osd32
           - enum:
               - st,stm32mp157
+
       - description: Odyssey STM32MP1 SoM based Boards
         items:
           - enum:
@@ -103,6 +183,36 @@ properties:
           - const: seeed,stm32mp157c-odyssey-som
           - const: st,stm32mp157
 
+      - description: Phytec STM32MP1 SoM based Boards
+        items:
+          - const: phytec,phycore-stm32mp1-3
+          - const: phytec,phycore-stm32mp157c-som
+          - const: st,stm32mp157
+
+      - description: Ultratronik STM32MP1 SBC based Boards
+        items:
+          - const: ultratronik,stm32mp157c-ultra-fly-sbc
+          - const: st,stm32mp157
+
+      - description: ST STM32MP257 based Boards
+        items:
+          - enum:
+              - st,stm32mp257f-dk
+              - st,stm32mp257f-ev1
+          - const: st,stm32mp257
+
+      - description: ST STM32MP235 based Boards
+        items:
+          - enum:
+              - st,stm32mp235f-dk
+          - const: st,stm32mp235
+
+      - description: ST STM32MP215 based Boards
+        items:
+          - enum:
+              - st,stm32mp215f-dk
+          - const: st,stm32mp215
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 000000000000..def7d0cfeb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 889128acf49a..9e4627f97d7e 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner platforms device tree bindings
+title: Allwinner platforms
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -51,6 +51,31 @@ properties:
           - const: allwinner,parrot
           - const: allwinner,sun8i-a33
 
+      - description: Anbernic RG-Nano
+        items:
+          - const: anbernic,rg-nano
+          - const: allwinner,sun8i-v3s
+
+      - description: Anbernic RG35XX (2024)
+        items:
+          - const: anbernic,rg35xx-2024
+          - const: allwinner,sun50i-h700
+
+      - description: Anbernic RG35XX H
+        items:
+          - const: anbernic,rg35xx-h
+          - const: allwinner,sun50i-h700
+
+      - description: Anbernic RG35XX Plus
+        items:
+          - const: anbernic,rg35xx-plus
+          - const: allwinner,sun50i-h700
+
+      - description: Anbernic RG35XX SP
+        items:
+          - const: anbernic,rg35xx-sp
+          - const: allwinner,sun50i-h700
+
       - description: Amarula A64 Relic
         items:
           - const: amarula,a64-relic
@@ -151,6 +176,17 @@ properties:
           - const: roofull,beelink-x2
           - const: allwinner,sun8i-h3
 
+      - description: BigTreeTech Manta M4/8P
+        items:
+          - const: bigtreetech,cb1-manta
+          - const: bigtreetech,cb1
+          - const: allwinner,sun50i-h616
+
+      - description: BigTreeTech Pi
+        items:
+          - const: bigtreetech,pi
+          - const: allwinner,sun50i-h616
+
       - description: Chuwi V7 CW0825
         items:
           - const: chuwi,v7-cw0825
@@ -305,9 +341,11 @@ properties:
           - const: allwinner,i12-tvbox
           - const: allwinner,sun7i-a20
 
-      - description: ICNova A20 SWAC
+      - description: ICnova A20
         items:
-          - const: incircuit,icnova-a20-swac
+          - enum:
+              - incircuit,icnova-a20-adb4006
+              - incircuit,icnova-a20-swac
           - const: incircuit,icnova-a20
           - const: allwinner,sun7i-a20
 
@@ -366,6 +404,12 @@ properties:
           - const: lamobo,lamobo-r1
           - const: allwinner,sun7i-a20
 
+      - description: Lctech Pi F1C200s
+        items:
+          - const: lctech,pi-f1c200s
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
       - description: Libre Computer Board ALL-H3-CC H2+
         items:
           - const: libretech,all-h3-cc-h2-plus
@@ -391,6 +435,11 @@ properties:
           - const: libretech,all-h5-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Lichee Pi Nano
+        items:
+          - const: licheepi,licheepi-nano
+          - const: allwinner,suniv-f1c100s
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -439,11 +488,21 @@ properties:
           - const: lamobo,lamobo-r1
           - const: allwinner,sun7i-a20
 
+      - description: Liontron H-A133L
+        items:
+          - const: liontron,h-a133l
+          - const: allwinner,sun50i-a100
+
       - description: HAOYU Electronics Marsboard A10
         items:
           - const: haoyu,a10-marsboard
           - const: allwinner,sun4i-a10
 
+      - description: HAOYU Electronics Marsboard A20
+        items:
+          - const: haoyu,a20-marsboard
+          - const: allwinner,sun7i-a20
+
       - description: MapleBoard MP130
         items:
           - const: mapleboard,mp130
@@ -519,18 +578,31 @@ properties:
           - const: msi,primo81
           - const: allwinner,sun6i-a31s
 
-      - description: Emlid Neutis N5 Developper Board
+      - description: Emlid Neutis N5 Developer Board
         items:
           - const: emlid,neutis-n5-devboard
           - const: emlid,neutis-n5
           - const: allwinner,sun50i-h5
 
-      - description: Emlid Neutis N5H3 Developper Board
+      - description: Emlid Neutis N5H3 Developer Board
         items:
           - const: emlid,neutis-n5h3-devboard
           - const: emlid,neutis-n5h3
           - const: allwinner,sun8i-h3
 
+      - description: NetCube Systems Kumquat
+        items:
+          - const: netcube,kumquat
+          - const: allwinner,sun8i-v3s
+
+      - description: NetCube Systems Nagami SoM based boards
+        items:
+          - enum:
+              - netcube,nagami-basic-carrier
+              - netcube,nagami-keypad-carrier
+          - const: netcube,nagami
+          - const: allwinner,sun8i-t113s
+
       - description: NextThing Co. CHIP
         items:
           - const: nextthing,chip
@@ -655,12 +727,12 @@ properties:
           - const: olimex,a64-teres-i
           - const: allwinner,sun50i-a64
 
-      - description: Pine64
+      - description: Pine64 PINE A64
         items:
           - const: pine64,pine64
           - const: allwinner,sun50i-a64
 
-      - description: Pine64+
+      - description: Pine64 PINE A64+
         items:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
@@ -671,17 +743,17 @@ properties:
           - const: sochip,s3
           - const: allwinner,sun8i-v3
 
-      - description: Pine64 PineH64 model A
+      - description: Pine64 PINE H64 Model A
         items:
           - const: pine64,pine-h64
           - const: allwinner,sun50i-h6
 
-      - description: Pine64 PineH64 model B
+      - description: Pine64 PINE H64 Model B
         items:
           - const: pine64,pine-h64-model-b
           - const: allwinner,sun50i-h6
 
-      - description: Pine64 LTS
+      - description: Pine64 PINE A64 LTS
         items:
           - const: pine64,pine64-lts
           - const: allwinner,sun50i-r18
@@ -692,35 +764,26 @@ properties:
           - const: pine64,pinebook
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PinePhone Developer Batch (1.0)
+      - description: Pine64 PinePhone
         items:
-          - const: pine64,pinephone-1.0
+          - enum:
+              - pine64,pinephone-1.0 # Developer Batch (1.0)
+              - pine64,pinephone-1.1 # Braveheart (1.1)
+              - pine64,pinephone-1.2
           - const: pine64,pinephone
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PinePhone Braveheart (1.1)
-        items:
-          - const: pine64,pinephone-1.1
-          - const: pine64,pinephone
-          - const: allwinner,sun50i-a64
-
-      - description: Pine64 PinePhone (1.2)
-        items:
-          - const: pine64,pinephone-1.2
-          - const: pine64,pinephone
-          - const: allwinner,sun50i-a64
-
-      - description: Pine64 PineTab, Development Sample
+      - description: Pine64 PineTab Developer Sample
         items:
           - const: pine64,pinetab
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+      - description: Pine64 PineTab Early Adopter
         items:
           - const: pine64,pinetab-early-adopter
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 SoPine Baseboard
+      - description: Pine64 SOPINE
         items:
           - const: pine64,sopine-baseboard
           - const: pine64,sopine
@@ -736,6 +799,11 @@ properties:
           - const: pocketbook,touch-lux-3
           - const: allwinner,sun5i-a13
 
+      - description: PocketBook 614 Plus
+        items:
+          - const: pocketbook,614-plus
+          - const: allwinner,sun5i-a13
+
       - description: Point of View Protab2-IPS9
         items:
           - const: pov,protab2-ips9
@@ -777,6 +845,23 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: Radxa Cubie A5E
+        items:
+          - const: radxa,cubie-a5e
+          - const: allwinner,sun55i-a527
+
+      - description: Remix Mini PC
+        items:
+          - const: jide,remix-mini-pc
+          - const: allwinner,sun50i-h64
+          - const: allwinner,sun50i-a64
+
+      - description: RerVision A33-Vstar (with A33-Core1 SoM)
+        items:
+          - const: rervision,a33-vstar
+          - const: rervision,a33-core1
+          - const: allwinner,sun8i-a33
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
@@ -797,17 +882,40 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: Sipeed Longan Pi 3H board for the Sipeed Longan Module 3H
+        items:
+          - const: sipeed,longan-pi-3h
+          - const: sipeed,longan-module-3h
+          - const: allwinner,sun50i-h618
+
+      - description: SourceParts PopStick v1.1
+        items:
+          - const: sourceparts,popstick-v1.1
+          - const: sourceparts,popstick
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
       - description: SL631 Action Camera with IMX179
         items:
           - const: allwinner,sl631-imx179
           - const: allwinner,sl631
           - const: allwinner,sun8i-v3
 
+      - description: Tanix TX1
+        items:
+          - const: oranth,tanix-tx1
+          - const: allwinner,sun50i-h616
+
       - description: Tanix TX6
         items:
           - const: oranth,tanix-tx6
           - const: allwinner,sun50i-h6
 
+      - description: Tanix TX6 mini
+        items:
+          - const: oranth,tanix-tx6-mini
+          - const: allwinner,sun50i-h6
+
       - description: TBS A711 Tablet
         items:
           - const: tbs-biometrics,a711
@@ -818,6 +926,11 @@ properties:
           - const: topwise,a721
           - const: allwinner,sun4i-a10
 
+      - description: Transpeed 8K618-T
+        items:
+          - const: transpeed,8k618-t
+          - const: allwinner,sun50i-h618
+
       - description: Utoo P66
         items:
           - const: utoo,p66
@@ -828,6 +941,11 @@ properties:
           - const: wexler,tab7200
           - const: allwinner,sun7i-a20
 
+      - description: MangoPi MQ-R board
+        items:
+          - const: widora,mangopi-mq-r-t113
+          - const: allwinner,sun8i-t113s
+
       - description: WITS A31 Colombus Evaluation Board
         items:
           - const: wits,colombus
@@ -848,6 +966,21 @@ properties:
           - const: yones-toptech,bs1078-v2
           - const: allwinner,sun6i-a31s
 
+      - description: X96 Mate TV box
+        items:
+          - const: hechuang,x96-mate
+          - const: allwinner,sun50i-h616
+
+      - description: X96Q
+        items:
+          - const: amediatech,x96q
+          - const: allwinner,sun50i-h616
+
+      - description: X96Q Pro+
+        items:
+          - const: amediatech,x96q-pro-plus
+          - const: allwinner,sun55i-h728
+
       - description: Xunlong OrangePi
         items:
           - const: xunlong,orangepi
@@ -863,6 +996,11 @@ properties:
           - const: xunlong,orangepi-3
           - const: allwinner,sun50i-h6
 
+      - description: Xunlong OrangePi 4A
+        items:
+          - const: xunlong,orangepi-4a
+          - const: allwinner,sun55i-t527
+
       - description: Xunlong OrangePi Lite
         items:
           - const: xunlong,orangepi-lite
@@ -948,4 +1086,29 @@ properties:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
 
+      - description: Xunlong OrangePi Zero 2
+        items:
+          - const: xunlong,orangepi-zero2
+          - const: allwinner,sun50i-h616
+
+      - description: Xunlong OrangePi Zero 2W
+        items:
+          - const: xunlong,orangepi-zero2w
+          - const: allwinner,sun50i-h618
+
+      - description: Xunlong OrangePi Zero 3
+        items:
+          - const: xunlong,orangepi-zero3
+          - const: allwinner,sun50i-h618
+
+      - description: YuzukiHD Avaota A1
+        items:
+          - const: yuzukihd,avaota-a1
+          - const: allwinner,sun55i-t527
+
+      - description: YuzukiHD Chameleon
+        items:
+          - const: yuzukihd,chameleon
+          - const: allwinner,sun50i-h618
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 29c9961ee2d8..99566688d033 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -29,15 +29,51 @@ properties:
   compatible:
     enum:
       - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-a33-mbus
+      - allwinner,sun8i-a50-mbus
+      - allwinner,sun8i-a83t-mbus
       - allwinner,sun8i-h3-mbus
       - allwinner,sun8i-r40-mbus
+      - allwinner,sun8i-v3s-mbus
+      - allwinner,sun8i-v536-mbus
+      - allwinner,sun20i-d1-mbus
       - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-a100-mbus
+      - allwinner,sun50i-h5-mbus
+      - allwinner,sun50i-h6-mbus
+      - allwinner,sun50i-h616-mbus
+      - allwinner,sun50i-r329-mbus
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: MBUS interconnect/bandwidth limit/PMU registers
+      - description: DRAM controller/PHY registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
 
   clocks:
+    minItems: 1
+    items:
+      - description: MBUS interconnect module clock
+      - description: DRAM controller/PHY module clock
+      - description: Register bus clock, shared by MBUS and DRAM
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+      - const: bus
+
+  interrupts:
     maxItems: 1
+    description:
+      MBUS PMU activity interrupt.
 
   dma-ranges:
     description:
@@ -54,13 +90,55 @@ required:
   - clocks
   - dma-ranges
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun5i-a13-mbus
+            - allwinner,sun8i-r40-mbus
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 3
+
+    clock-names:
+      minItems: 3
+
+  required:
+    - reg-names
+    - clock-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    mbus: dram-controller@1c01000 {
+    dram-controller@1c01000 {
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
@@ -70,4 +148,21 @@ examples:
         #interconnect-cells = <1>;
     };
 
+  - |
+    dram-controller@1c62000 {
+        compatible = "allwinner,sun50i-a64-mbus";
+        reg = <0x01c62000 0x1000>,
+              <0x01c63000 0x1000>;
+        reg-names = "mbus", "dram";
+        clocks = <&ccu CLK_MBUS>,
+                 <&ccu CLK_DRAM>,
+                 <&ccu CLK_BUS_DRAM>;
+        clock-names = "mbus", "dram", "bus";
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+        #interconnect-cells = <1>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
index f3878e0b3cc4..d805c4508b4e 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner CPU Configuration Controller Device Tree Bindings
+title: Allwinner CPU Configuration Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
index 668aadbfe4c0..644f391afb32 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 PRCM Device Tree Bindings
+title: Allwinner A80 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/arm/swir.txt b/Documentation/devicetree/bindings/arm/swir.txt
deleted file mode 100644
index 042be73a95d3..000000000000
--- a/Documentation/devicetree/bindings/arm/swir.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sierra Wireless Modules device tree bindings
---------------------------------------------
-
-Supported Modules :
- - WP8548 : Includes MDM9615 and PM8018 in a module
-
-Sierra Wireless modules shall have the following properties :
-  Required root node property
-   - compatible: "swir,wp8548" for the WP8548 CF3 Module
-
-Board compatible values:
-  - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
deleted file mode 100644
index d8b48f2edf1b..000000000000
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-Synaptics SoC Device Tree Bindings
-
-According to https://www.synaptics.com/company/news/conexant-marvell
-Synaptics has acquired the Multimedia Solutions Business of Marvell, so
-berlin SoCs are now Synaptics' SoCs now.
-
----------------------------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with the Synaptics AS370 SoC shall have the following properties:
-  Required root node property:
-    compatible: "syna,as370"
-
-Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
-shall have the following properties:
-
-* Required root node properties:
-compatible: must contain "marvell,berlin"
-
-In addition, the above compatible shall be extended with the specific
-SoC and board used. Currently known SoC compatibles are:
-    "marvell,berlin2"      for Marvell Armada 1500 (BG2, 88DE3100),
-    "marvell,berlin2cd"    for Marvell Armada 1500-mini (BG2CD, 88DE3005)
-    "marvell,berlin2ct"    for Marvell Armada ? (BG2CT, 88DE????)
-    "marvell,berlin2q"     for Marvell Armada 1500-pro (BG2Q, 88DE3114)
-    "marvell,berlin3"      for Marvell Armada ? (BG3, 88DE????)
-
-* Example:
-
-/ {
-	model = "Sony NSZ-GS7";
-	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
-	...
-}
-
-* Marvell Berlin CPU control bindings
-
-CPU control register allows various operations on CPUs, like resetting them
-independently.
-
-Required properties:
-- compatible: should be "marvell,berlin-cpu-ctrl"
-- reg: address and length of the register set
-
-Example:
-
-cpu-ctrl@f7dd0000 {
-	compatible = "marvell,berlin-cpu-ctrl";
-	reg = <0xf7dd0000 0x10000>;
-};
-
-* Marvell Berlin2 chip control binding
-
-Marvell Berlin SoCs have a chip control register set providing several
-individual registers dealing with pinmux, padmux, clock, reset, and secondary
-CPU boot address. Unfortunately, the individual registers are spread among the
-chip control registers, so there should be a single DT node only providing the
-different functions which are described below.
-
-Required properties:
-- compatible:
-	* the first and second values must be:
-		"simple-mfd", "syscon"
-- reg: address and length of following register sets for
-  BG2/BG2CD: chip control register set
-  BG2Q: chip control register set and cpu pll registers
-
-* Marvell Berlin2 system control binding
-
-Marvell Berlin SoCs have a system control register set providing several
-individual registers dealing with pinmux, padmux, and reset.
-
-Required properties:
-- compatible:
-	* the first and second values must be:
-		"simple-mfd", "syscon"
-- reg: address and length of the system control register set
-
-Example:
-
-chip: chip-control@ea0000 {
-	compatible = "simple-mfd", "syscon";
-	reg = <0xea0000 0x400>;
-
-	/* sub-device nodes */
-};
-
-sysctrl: system-controller@d000 {
-	compatible = "simple-mfd", "syscon";
-	reg = <0xd000 0x100>;
-
-	/* sub-device nodes */
-};
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index d79d36ac0c44..50a31dba7bec 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/tegra.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra device tree bindings
+title: NVIDIA Tegra
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -36,6 +36,13 @@ properties:
               - toradex,colibri_t20-iris
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
+      - description: ASUS Transformers T20 Device family
+        items:
+          - enum:
+              - asus,sl101
+              - asus,tf101
+              - asus,tf101g
+          - const: nvidia,tegra20
       - items:
           - const: acer,picasso
           - const: nvidia,tegra20
@@ -49,6 +56,31 @@ properties:
               - nvidia,cardhu-a04
           - const: nvidia,cardhu
           - const: nvidia,tegra30
+      - description: ASUS Portable AiO P1801-T
+        items:
+          - const: asus,p1801-t
+          - const: nvidia,tegra30
+      - description: ASUS Transformers Device family
+        items:
+          - enum:
+              - asus,tf201
+              - asus,tf300t
+              - asus,tf300tg
+              - asus,tf300tl
+              - asus,tf700t
+          - const: nvidia,tegra30
+      - description: Asus VivoTab RT
+        items:
+          - const: asus,tf600t
+          - const: nvidia,tegra30
+      - description: LG Optimus 4X P880
+        items:
+          - const: lg,p880
+          - const: nvidia,tegra30
+      - description: LG Optimus Vu P895
+        items:
+          - const: lg,p895
+          - const: nvidia,tegra30
       - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
@@ -75,7 +107,11 @@ properties:
           - const: ouya,ouya
           - const: nvidia,tegra30
       - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
+      - items:
           - enum:
+              - asus,tf701t
               - nvidia,dalmore
               - nvidia,roth
               - nvidia,tn7
@@ -101,21 +137,75 @@ properties:
           - const: nvidia,tegra132
           - const: nvidia,tegra124
       - items:
+          - const: google,nyan-blaze-rev10
+          - const: google,nyan-blaze-rev9
+          - const: google,nyan-blaze-rev8
+          - const: google,nyan-blaze-rev7
+          - const: google,nyan-blaze-rev6
+          - const: google,nyan-blaze-rev5
+          - const: google,nyan-blaze-rev4
+          - const: google,nyan-blaze-rev3
+          - const: google,nyan-blaze-rev2
+          - const: google,nyan-blaze-rev1
+          - const: google,nyan-blaze-rev0
+          - const: google,nyan-blaze
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - items:
+          - const: google,nyan-big-rev10
+          - const: google,nyan-big-rev9
+          - const: google,nyan-big-rev8
+          - const: google,nyan-big-rev7
+          - const: google,nyan-big-rev6
+          - const: google,nyan-big-rev5
+          - const: google,nyan-big-rev4
+          - const: google,nyan-big-rev3
+          - const: google,nyan-big-rev2
+          - const: google,nyan-big-rev1
+          - const: google,nyan-big-rev0
+          - const: google,nyan-big
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - items:
+          - const: google,nyan-big-rev7
+          - const: google,nyan-big-rev6
+          - const: google,nyan-big-rev5
+          - const: google,nyan-big-rev4
+          - const: google,nyan-big-rev3
+          - const: google,nyan-big-rev2
+          - const: google,nyan-big-rev1
+          - const: google,nyan-big-rev0
+          - const: google,nyan-big
+          - const: google,nyan
+          - const: nvidia,tegra124
+      - description: Xiaomi Mi Pad (A0101)
+        items:
+          - const: xiaomi,mocha
+          - const: nvidia,tegra124
+      - items:
           - enum:
               - nvidia,darcy
               - nvidia,p2371-0000
               - nvidia,p2371-2180
               - nvidia,p2571
               - nvidia,p2894-0050-a08
+              - nvidia,p3450-0000
           - const: nvidia,tegra210
       - items:
-          - enum:
-              - nvidia,p2771-0000
-              - nvidia,p3509-0000+p3636-0001
+          - const: nvidia,p3541-0000
+          - const: nvidia,p3450-0000
+          - const: nvidia,tegra210
+      - description: Jetson TX2 Developer Kit
+        items:
+          - const: nvidia,p2771-0000
           - const: nvidia,tegra186
-      - items:
-          - enum:
-              - nvidia,p2972-0000
+      - description: Jetson TX2 NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3636-0001
+          - const: nvidia,tegra186
+      - description: Jetson AGX Xavier Developer Kit
+        items:
+          - const: nvidia,p2972-0000
           - const: nvidia,tegra194
       - description: Jetson Xavier NX
         items:
@@ -134,8 +224,49 @@ properties:
           - const: nvidia,p3509-0000+p3668-0001
           - const: nvidia,tegra194
       - items:
-          - enum:
-              - nvidia,tegra234-vdk
+          - const: nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin
+        items:
+          - const: nvidia,p3701-0000
           - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit
+        items:
+          - const: nvidia,p3737-0000+p3701-0000
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit with Industrial Module
+        items:
+          - const: nvidia,p3737-0000+p3701-0008
+          - const: nvidia,p3701-0008
+          - const: nvidia,tegra234
+      - description: NVIDIA IGX Orin Development Kit
+        items:
+          - const: nvidia,p3740-0002+p3701-0008
+          - const: nvidia,p3701-0008
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX
+        items:
+          - const: nvidia,p3767-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX Engineering Reference Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0000
+          - const: nvidia,p3767-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin Nano
+        items:
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
+      - description: Jetson Orin Nano Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0005
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
+      - description: NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform
+        items:
+          - const: nvidia,p3971-0089+p3834-0008
+          - const: nvidia,p3834-0008
+          - const: nvidia,tegra264
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt
deleted file mode 100644
index 5ae601e7f51f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NVIDIA compliant embedded controller
-
-Required properties:
-- compatible : should be "nvidia,nvec".
-- reg : the iomem of the i2c slave controller
-- interrupts : the interrupt line of the i2c slave controller
-- clock-frequency : the frequency of the i2c bus
-- gpios : the gpio used for ec request
-- slave-addr: the i2c address of the slave controller
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2c
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
new file mode 100644
index 000000000000..36dbd0838f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
+  registers that initiate CPU frequency/voltage transitions.
+
+properties:
+  $nodename:
+    pattern: "ccplex@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-ccplex-cluster
+      - nvidia,tegra234-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the BPMP node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+      compatible = "nvidia,tegra234-ccplex-cluster";
+      reg = <0x0e000000 0x5ffff>;
+      nvidia,bpmp = <&bpmp>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
deleted file mode 100644
index 576462fae27f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra186-pmc": for Tegra186
-  - "nvidia,tegra194-pmc": for Tegra194
-  - "nvidia,tegra234-pmc": for Tegra234
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "pmc"
-  - "wake"
-  - "aotag"
-  - "scratch"
-  - "misc" (Only for Tegra194 and later)
-
-Optional properties:
-- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-Example:
-
-SoC DTSI:
-
-	pmc@c3600000 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-	};
-
-Board DTS:
-
-	pmc@c360000 {
-		nvidia,invert-interrupt;
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-Pad configurations are described with pin configuration nodes which
-are placed under the pmc node and they are referred to by the pinctrl
-client properties. For more information see
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-
-The following pads are present on Tegra186:
-csia		csib		dsi		mipi-bias
-pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
-usb0		usb1		usb2		usb-bias
-uart		audio		hsic		dbg
-hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
-sdmmc4		cam		dsib		dsic
-dsid		csic		csid		csie
-dsif		spi		ufs		dmic-hv
-edp		sdmmc1-hv	sdmmc3-hv	conn
-audio-hv	ao-hv
-
-Required pin configuration properties:
-  - pins: A list of strings, each of which contains the name of a pad
-	  to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
-    TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the above pads except
-      for ao-hv. Following pads have software configurable signaling
-      voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
-      ao-hv.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@3400000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-
-	...
-
-	sor0: sor@15540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
new file mode 100644
index 000000000000..be70819020c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-pmc
+      - nvidia,tegra194-pmc
+      - nvidia,tegra234-pmc
+      - nvidia,tegra264-pmc
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: pmc
+      - const: wake
+      - const: aotag
+      - enum: [ scratch, misc ]
+      - const: misc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: Specifies the number of cells needed to encode an
+      interrupt source. The value must be 2.
+    const: 2
+
+  nvidia,invert-interrupt:
+    description: If present, inverts the PMU interrupt signal.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-pmc
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+          contains:
+            const: scratch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra194-pmc
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-pmc
+    then:
+      properties:
+        reg-names:
+          contains:
+            const: misc
+
+patternProperties:
+  "^[a-z0-9]+-[a-z0-9]+$":
+    if:
+      type: object
+    then:
+      description: |
+        These are pad configuration nodes. On Tegra SoCs a pad is a set of
+        pins which are configured as a group. The pin grouping is a fixed
+        attribute of the hardware. The PMC can be used to set pad power
+        state and signaling voltage. A pad can be either in active or
+        power down mode. The support for power state and signaling voltage
+        configuration varies depending on the pad in question. 3.3 V and
+        1.8 V signaling voltages are supported on pins where software
+        controllable signaling voltage switching is available.
+
+        Pad configurations are described with pin configuration nodes
+        which are placed under the pmc node and they are referred to by
+        the pinctrl client properties. For more information see
+
+          Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+        The following pads are present on Tegra186:
+
+          csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
+          dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
+          sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
+
+        The following pads are present on Tegra194:
+
+          csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
+          pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
+          soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
+          pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
+          spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
+          audio-hv, ao-hv
+
+      properties:
+        pins:
+          $ref: /schemas/types.yaml#/definitions/string
+          description: Must contain the name of the pad(s) to be
+            configured.
+
+        low-power-enable:
+          description: Configure the pad into power down mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        low-power-disable:
+          description: Configure the pad into active mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        power-source:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+            TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling
+            voltages.
+
+            The values are defined in
+
+              include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
+
+            The power state can be configured on all of the above pads
+            except for ao-hv. Following pads have software configurable
+            signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
+            audio-hv, ao-hv.
+
+        phandle: true
+
+      required:
+        - pins
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: ['#interrupt-cells']
+  "#interrupt-cells":
+    required:
+      - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    pmc@c3600000 {
+        compatible = "nvidia,tegra186-pmc";
+        reg = <0x0c360000 0x10000>,
+              <0x0c370000 0x10000>,
+              <0x0c380000 0x10000>,
+              <0x0c390000 0x10000>;
+        reg-names = "pmc", "wake", "aotag", "scratch";
+        nvidia,invert-interrupt;
+
+        sdmmc1_3v3: sdmmc1-3v3 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+        };
+
+        sdmmc1_1v8: sdmmc1-1v8 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+        };
+    };
+
+    sdmmc1: mmc@3400000 {
+        compatible = "nvidia,tegra186-sdhci";
+        reg = <0x03400000 0x10000>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+                 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+        reset-names = "sdhci";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_SDMMC1>;
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
new file mode 100644
index 000000000000..5e0f1dc542b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^axi2apb@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-axi2apb
+
+  reg:
+    maxItems: 6
+    description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    axi2apb: axi2apb@2390000 {
+      compatible = "nvidia,tegra194-axi2apb";
+      reg = <0x02390000 0x1000>,
+            <0x023a0000 0x1000>,
+            <0x023b0000 0x1000>,
+            <0x023c0000 0x1000>,
+            <0x023d0000 0x1000>,
+            <0x023e0000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 000000000000..d9c54c32c6b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 CBB 1.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 1.0 has
+  multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+  initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+  This driver handles errors due to illegal register accesses reported
+  by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+  "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+  which is the main NOC.
+
+  By default, the access issuing initiator is informed about the error
+  using SError or Data Abort exception unless the ERD (Error Response
+  Disable) is enabled/set for that initiator. If the ERD is enabled, then
+  SError or Data Abort is masked and the error is reported with interrupt.
+
+  - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+    errors due to illegal accesses from CCPLEX are reported by interrupts.
+    If ERD is not set, then error is reported by SError.
+  - For other initiators, the ERD is disabled. So, the access issuing
+    initiator is informed about the illegal access by Data Abort exception.
+    In addition, an interrupt is also generated to CCPLEX. These initiators
+    include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+    engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+    engine) etc which can initiate transactions.
+
+  The driver prints relevant debug information like Error Code, Error
+  Description, Master, Address, AXI ID, Cache, Protection, Security Group
+  etc on receiving error notification.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-cbb-noc
+      - nvidia,tegra194-aon-noc
+      - nvidia,tegra194-bpmp-noc
+      - nvidia,tegra194-rce-noc
+      - nvidia,tegra194-sce-noc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      CCPLEX receives secure or nonsecure interrupt depending on error type.
+      A secure interrupt is received for SEC(firewall) & SLV errors and a
+      non-secure interrupt is received for TMO & DEC errors.
+    items:
+      - description: non-secure interrupt
+      - description: secure interrupt
+
+  nvidia,axi2apb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the node having all axi2apb bridges which need to be checked
+      for any error logged in their status register.
+
+  nvidia,apbmisc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the apbmisc node which need to be used for reading the ERD
+      register.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,apbmisc
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-noc@2300000 {
+        compatible = "nvidia,tegra194-cbb-noc";
+        reg = <0x02300000 0x1000>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,axi2apb = <&axi2apb>;
+        nvidia,apbmisc = <&apbmisc>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
deleted file mode 100644
index 9a4295b54539..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NVIDIA Tegra AHB
-
-Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-ahb".  For
-  Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
-  '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
-  tegra132, or tegra210.
-- reg : Should contain 1 register ranges(address and length).  For
-  Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004
-  0x10c>.  For Tegra124, Tegra132 and Tegra210 chips, the value should
-  be be <0x6000c000 0x150>.
-
-Example (for a Tegra20 chip):
-	ahb: ahb@6000c004 {
-		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
deleted file mode 100644
index a855c1bffc0f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-NVIDIA Tegra Flow Controller
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra20-flowctrl": for Tegra20
-  - "nvidia,tegra30-flowctrl": for Tegra30
-  - "nvidia,tegra114-flowctrl": for Tegra114
-  - "nvidia,tegra124-flowctrl": for Tegra124
-  - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132
-  - "nvidia,tegra210-flowctrl": for Tegra210
-- reg: Should contain one register range (address and length)
-
-Example:
-
-	flow-controller@60007000 {
-		compatible = "nvidia,tegra20-flowctrl";
-		reg = <0x60007000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
deleted file mode 100644
index 0afec83cc723..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ /dev/null
@@ -1,390 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Tegra Power Management Controller (PMC)
-
-maintainers:
-  - Thierry Reding <thierry.reding@gmail.com>
-  - Jonathan Hunter <jonathanh@nvidia.com>
-
-properties:
-  compatible:
-    enum:
-      - nvidia,tegra20-pmc
-      - nvidia,tegra20-pmc
-      - nvidia,tegra30-pmc
-      - nvidia,tegra114-pmc
-      - nvidia,tegra124-pmc
-      - nvidia,tegra210-pmc
-
-  reg:
-    maxItems: 1
-    description:
-      Offset and length of the register set for the device.
-
-  clock-names:
-    items:
-      - const: pclk
-      - const: clk32k_in
-    description:
-      Must includes entries pclk and clk32k_in.
-      pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
-      input to Tegra.
-
-  clocks:
-    maxItems: 2
-    description:
-      Must contain an entry for each entry in clock-names.
-      See ../clocks/clocks-bindings.txt for details.
-
-  '#clock-cells':
-    const: 1
-    description:
-      Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
-      PMC also has blink control which allows 32Khz clock output to
-      Tegra blink pad.
-      Consumer of PMC clock should specify the desired clock by having
-      the clock ID in its "clocks" phandle cell with pmc clock provider.
-      See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
-      clock IDs.
-
-  '#interrupt-cells':
-    const: 2
-    description:
-      Specifies number of cells needed to encode an interrupt source.
-      The value must be 2.
-
-  interrupt-controller: true
-
-  nvidia,invert-interrupt:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: Inverts the PMU interrupt signal.
-      The PMU is an external Power Management Unit, whose interrupt output
-      signal is fed into the PMC. This signal is optionally inverted, and
-      then fed into the ARM GIC. The PMC is not involved in the detection
-      or handling of this interrupt signal, merely its inversion.
-
-  nvidia,core-power-req-active-high:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: Core power request active-high.
-
-  nvidia,sys-clock-req-active-high:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: System clock request active-high.
-
-  nvidia,combined-power-req:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: combined power request for CPU and Core.
-
-  nvidia,cpu-pwr-good-en:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      CPU power good signal from external PMIC to PMC is enabled.
-
-  nvidia,suspend-mode:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2]
-    description:
-      The suspend mode that the platform should use.
-      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
-      Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
-      Mode 2 is for LP2, CPU voltage off
-
-  nvidia,cpu-pwr-good-time:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: CPU power good time in uSec.
-
-  nvidia,cpu-pwr-off-time:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: CPU power off time in uSec.
-
-  nvidia,core-pwr-good-time:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    description:
-      <Oscillator-stable-time Power-stable-time>
-      Core power good time in uSec.
-
-  nvidia,core-pwr-off-time:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Core power off time in uSec.
-
-  nvidia,lp0-vec:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    description:
-      <start length> Starting address and length of LP0 vector.
-      The LP0 vector contains the warm boot code that is executed
-      by AVP when resuming from the LP0 state.
-      The AVP (Audio-Video Processor) is an ARM7 processor and
-      always being the first boot processor when chip is power on
-      or resume from deep sleep mode. When the system is resumed
-      from the deep sleep mode, the warm boot code will restore
-      some PLLs, clocks and then brings up CPU0 for resuming the
-      system.
-
-  i2c-thermtrip:
-    type: object
-    description:
-      On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
-      hardware-triggered thermal reset will be enabled.
-
-    properties:
-      nvidia,i2c-controller-id:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          ID of I2C controller to send poweroff command to PMU.
-          Valid values are described in section 9.2.148
-          "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
-          Manual.
-
-      nvidia,bus-addr:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Bus address of the PMU on the I2C bus.
-
-      nvidia,reg-addr:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: PMU I2C register address to issue poweroff command.
-
-      nvidia,reg-data:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Poweroff command to write to PMU.
-
-      nvidia,pinmux-id:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Pinmux used by the hardware when issuing Poweroff command.
-          Defaults to 0. Valid values are described in section 12.5.2
-          "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-    required:
-      - nvidia,i2c-controller-id
-      - nvidia,bus-addr
-      - nvidia,reg-addr
-      - nvidia,reg-data
-
-    additionalProperties: false
-
-  powergates:
-    type: object
-    description: |
-      This node contains a hierarchy of power domain nodes, which should
-      match the powergates on the Tegra SoC. Each powergate node
-      represents a power-domain on the Tegra SoC that can be power-gated
-      by the Tegra PMC.
-      Hardware blocks belonging to a power domain should contain
-      "power-domains" property that is a phandle pointing to corresponding
-      powergate node.
-      The name of the powergate node should be one of the below. Note that
-      not every powergate is applicable to all Tegra devices and the following
-      list shows which powergates are applicable to which devices.
-      Please refer to Tegra TRM for mode details on the powergate nodes to
-      use for each power-gate block inside Tegra.
-      Name		Description			            Devices Applicable
-      3d		  3D Graphics			            Tegra20/114/124/210
-      3d0		  3D Graphics 0		            Tegra30
-      3d1		  3D Graphics 1		            Tegra30
-      aud		  Audio				                Tegra210
-      dfd		  Debug				                Tegra210
-      dis		  Display A			              Tegra114/124/210
-      disb		Display B			              Tegra114/124/210
-      heg		  2D Graphics		            	Tegra30/114/124/210
-      iram		Internal RAM		            Tegra124/210
-      mpe		  MPEG Encode			            All
-      nvdec		NVIDIA Video Decode Engine	Tegra210
-      nvjpg		NVIDIA JPEG Engine		      Tegra210
-      pcie		PCIE				                Tegra20/30/124/210
-      sata		SATA				                Tegra30/124/210
-      sor		  Display interfaces       		Tegra124/210
-      ve2		  Video Encode Engine 2		    Tegra210
-      venc		Video Encode Engine		      All
-      vdec		Video Decode Engine		      Tegra20/30/114/124
-      vic		  Video Imaging Compositor	  Tegra124/210
-      xusba		USB Partition A			        Tegra114/124/210
-      xusbb		USB Partition B 		        Tegra114/124/210
-      xusbc		USB Partition C			        Tegra114/124/210
-
-    patternProperties:
-      "^[a-z0-9]+$":
-        type: object
-
-        patternProperties:
-          clocks:
-            minItems: 1
-            maxItems: 8
-            description:
-              Must contain an entry for each clock required by the PMC
-              for controlling a power-gate.
-              See ../clocks/clock-bindings.txt document for more details.
-
-          resets:
-            minItems: 1
-            maxItems: 8
-            description:
-              Must contain an entry for each reset required by the PMC
-              for controlling a power-gate.
-              See ../reset/reset.txt for more details.
-
-          '#power-domain-cells':
-            const: 0
-            description: Must be 0.
-
-        required:
-          - clocks
-          - resets
-          - '#power-domain-cells'
-
-    additionalProperties: false
-
-patternProperties:
-  "^[a-f0-9]+-[a-f0-9]+$":
-    type: object
-    description:
-      This is a Pad configuration node. On Tegra SOCs a pad is a set of
-      pins which are configured as a group. The pin grouping is a fixed
-      attribute of the hardware. The PMC can be used to set pad power state
-      and signaling voltage. A pad can be either in active or power down mode.
-      The support for power state and signaling voltage configuration varies
-      depending on the pad in question. 3.3V and 1.8V signaling voltages
-      are supported on pins where software controllable signaling voltage
-      switching is available.
-
-      The pad configuration state nodes are placed under the pmc node and they
-      are referred to by the pinctrl client properties. For more information
-      see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-      The pad name should be used as the value of the pins property in pin
-      configuration nodes.
-
-      The following pads are present on Tegra124 and Tegra132
-      audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
-      hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
-      sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
-
-      The following pads are present on Tegra210
-      audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
-      debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
-      hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
-      sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
-
-    properties:
-      pins:
-        $ref: /schemas/types.yaml#/definitions/string
-        description: Must contain name of the pad(s) to be configured.
-
-      low-power-enable:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description: Configure the pad into power down mode.
-
-      low-power-disable:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description: Configure the pad into active mode.
-
-      power-source:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
-          TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-          The values are defined in
-          include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-          Power state can be configured on all Tegra124 and Tegra132
-          pads. None of the Tegra124 or Tegra132 pads support signaling
-          voltage switching.
-          All of the listed Tegra210 pads except pex-cntrl support power
-          state configuration. Signaling voltage switching is supported
-          on below Tegra210 pads.
-          audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
-          sdmmc3, spi, spi-hv, and uart.
-
-    required:
-      - pins
-
-    additionalProperties: false
-
-  core-domain:
-    type: object
-    description: |
-      The vast majority of hardware blocks of Tegra SoC belong to a
-      Core power domain, which has a dedicated voltage rail that powers
-      the blocks.
-
-    properties:
-      operating-points-v2:
-        description:
-          Should contain level, voltages and opp-supported-hw property.
-          The supported-hw is a bitfield indicating SoC speedo or process
-          ID mask.
-
-      "#power-domain-cells":
-        const: 0
-
-    required:
-      - operating-points-v2
-      - "#power-domain-cells"
-
-    additionalProperties: false
-
-  core-supply:
-    description:
-      Phandle to voltage regulator connected to the SoC Core power rail.
-
-required:
-  - compatible
-  - reg
-  - clock-names
-  - clocks
-  - '#clock-cells'
-
-additionalProperties: false
-
-dependencies:
-  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
-  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
-  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
-
-examples:
-  - |
-
-    #include <dt-bindings/clock/tegra210-car.h>
-    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
-    #include <dt-bindings/soc/tegra-pmc.h>
-
-    tegra_pmc: pmc@7000e400 {
-              compatible = "nvidia,tegra210-pmc";
-              reg = <0x7000e400 0x400>;
-              core-supply = <&regulator>;
-              clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
-              clock-names = "pclk", "clk32k_in";
-              #clock-cells = <1>;
-
-              nvidia,invert-interrupt;
-              nvidia,suspend-mode = <0>;
-              nvidia,cpu-pwr-good-time = <0>;
-              nvidia,cpu-pwr-off-time = <0>;
-              nvidia,core-pwr-good-time = <4587 3876>;
-              nvidia,core-pwr-off-time = <39065>;
-              nvidia,core-power-req-active-high;
-              nvidia,sys-clock-req-active-high;
-
-              pd_core: core-domain {
-                      operating-points-v2 = <&core_opp_table>;
-                      #power-domain-cells = <0>;
-              };
-
-              powergates {
-                    pd_audio: aud {
-                            clocks = <&tegra_car TEGRA210_CLK_APE>,
-                                     <&tegra_car TEGRA210_CLK_APB2APE>;
-                            resets = <&tegra_car 198>;
-                            power-domains = <&pd_core>;
-                            #power-domain-cells = <0>;
-                    };
-
-                    pd_xusbss: xusba {
-                            clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-                            resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-                            power-domains = <&pd_core>;
-                            #power-domain-cells = <0>;
-                    };
-              };
-    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
new file mode 100644
index 000000000000..fcdf03131323
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CBB 2.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 2.0 consists
+  of multiple sub-blocks connected to each other to create a topology.
+  The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+  which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+  "CBB central fabric".
+
+  In CBB 2.0, each initiator which can issue transactions connects to a
+  Root Master Node (MN) before it connects to any other element of the
+  fabric. Each Root MN contains a Error Monitor (EM) which detects and
+  logs error. Interrupts from various EM blocks are collated by Error
+  Notifier (EN) which is per fabric and presents a single interrupt from
+  fabric to the SoC interrupt controller.
+
+  The driver handles errors from CBB due to illegal register accesses
+  and prints debug information about failed transaction on receiving
+  the interrupt from EN. Debug information includes Error Code, Error
+  Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+  Security Group etc on receiving error notification.
+
+  If the Error Response Disable (ERD) is set/enabled for an initiator,
+  then SError or Data abort exception error response is masked and an
+  interrupt is used for reporting errors due to illegal accesses from
+  that initiator. The value returned on read failures is '0xFFFFFFFF'
+  for compatibility with PCIE.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-aon-fabric
+      - nvidia,tegra234-bpmp-fabric
+      - nvidia,tegra234-cbb-fabric
+      - nvidia,tegra234-dce-fabric
+      - nvidia,tegra234-rce-fabric
+      - nvidia,tegra234-sce-fabric
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-fabric@1300000 {
+      compatible = "nvidia,tegra234-cbb-fabric";
+      reg = <0x13a00000 0x400000>;
+      interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml
new file mode 100644
index 000000000000..d670a0d56222
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tesla.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tesla.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla Full Self Driving(FSD) platforms
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: FSD SoC board
+        items:
+          - enum:
+              - tesla,fsd-evb   # Tesla FSD Evaluation
+          - const: tesla,fsd
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index cf327230fc0e..85deda6d4292 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/k3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+title: Texas Instruments K3 Multicore SoC architecture
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
@@ -19,39 +19,211 @@ properties:
   compatible:
     oneOf:
 
+      - description: K3 AM62A7 SoC
+        items:
+          - enum:
+              - ti,am62a7-sk
+          - const: ti,am62a7
+
+      - description: K3 AM62D2 SoC and Boards
+        items:
+          - enum:
+              - ti,am62d2-evm
+          - const: ti,am62d2
+
+      - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra
+        items:
+          - const: phytec,am62a7-phyboard-lyra-rdk
+          - const: phytec,am62a-phycore-som
+          - const: ti,am62a7
+
+      - description: K3 AM62L3 SoC and Boards
+        items:
+          - enum:
+              - ti,am62l3-evm
+          - const: ti,am62l3
+
+      - description: K3 AM62P5 SoC and Boards
+        items:
+          - enum:
+              - ti,am62p5-sk
+          - const: ti,am62p5
+
+      - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra
+        items:
+          - const: phytec,am625-phyboard-lyra-rdk
+          - const: phytec,am62-phycore-som
+          - const: ti,am625
+
+      - description: K3 AM625 SoC
+        items:
+          - enum:
+              - beagle,am62-pocketbeagle2
+              - beagle,am625-beagleplay
+              - ti,am625-sk
+              - ti,am62-lp-sk
+          - const: ti,am625
+
+      - description: K3 AM6254atl SiP
+        items:
+          - enum:
+              - ti,am6254atl-sk
+          - const: ti,am6254atl
+          - const: ti,am625
+
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
+              - toradex,verdin-am62-nonwifi-dev    # Verdin AM62 Module on Verdin Development Board
+              - toradex,verdin-am62-nonwifi-ivy    # Verdin AM62 Module on Ivy
+              - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow
+              - toradex,verdin-am62-nonwifi-yavia  # Verdin AM62 Module on Yavia
+          - const: toradex,verdin-am62-nonwifi     # Verdin AM62 Module without Wi-Fi / BT
+          - const: toradex,verdin-am62             # Verdin AM62 Module
+          - const: ti,am625
+
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+        items:
+          - enum:
+              - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-am62-wifi-dev    # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62-wifi-ivy    # Verdin AM62 Wi-Fi / BT Module on Ivy
+              - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow
+              - toradex,verdin-am62-wifi-yavia  # Verdin AM62 Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-am62-wifi     # Verdin AM62 Wi-Fi / BT Module
+          - const: toradex,verdin-am62          # Verdin AM62 Module
+          - const: ti,am625
+
+      - description: K3 AM62P5 SoC Toradex Verdin Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,verdin-am62p-nonwifi-dahlia # Verdin AM62P Module on Dahlia
+              - toradex,verdin-am62p-nonwifi-dev    # Verdin AM62P Module on Verdin Development Board
+              - toradex,verdin-am62p-nonwifi-ivy    # Verdin AM62P Module on Ivy
+              - toradex,verdin-am62p-nonwifi-mallow # Verdin AM62P Module on Mallow
+              - toradex,verdin-am62p-nonwifi-yavia  # Verdin AM62P Module on Yavia
+          - const: toradex,verdin-am62p-nonwifi     # Verdin AM62P Module without Wi-Fi / BT
+          - const: toradex,verdin-am62p             # Verdin AM62P Module
+          - const: ti,am62p5
+
+      - description: K3 AM62P5 SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+        items:
+          - enum:
+              - toradex,verdin-am62p-wifi-dahlia # Verdin AM62P Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-am62p-wifi-dev    # Verdin AM62P Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62p-wifi-ivy    # Verdin AM62P Wi-Fi / BT Module on Ivy
+              - toradex,verdin-am62p-wifi-mallow # Verdin AM62P Wi-Fi / BT Module on Mallow
+              - toradex,verdin-am62p-wifi-yavia  # Verdin AM62P Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-am62p-wifi     # Verdin AM62P Wi-Fi / BT Module
+          - const: toradex,verdin-am62p          # Verdin AM62P Module
+          - const: ti,am62p5
+
+      - description: K3 AM62P5 SoC Variscite SOM and Carrier Boards
+        items:
+          - const: variscite,var-som-am62p-symphony
+          - const: variscite,var-som-am62p
+          - const: ti,am62p5
+
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
+      - description: K3 AM642 SoC PHYTEC phyBOARD-Electra
+        items:
+          - const: phytec,am642-phyboard-electra-rdk
+          - const: phytec,am64-phycore-som
+          - const: ti,am642
+
+      - description: K3 AM642 SoC on TQ-Systems TQMaX4XxL SoM
+        items:
+          - enum:
+              - tq,am642-tqma6442l-mbax4xxl # MBaX4XxL base board
+          - const: tq,am642-tqma6442l
+          - const: ti,am642
+
+      - description: K3 AM642 SoC SolidRun SoM based boards
+        items:
+          - enum:
+              - solidrun,am642-hummingboard-t
+          - const: solidrun,am642-sr-som
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
-              - ti,am654-evm
-              - siemens,iot2050-basic
-              - siemens,iot2050-basic-pg2
               - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-m2
               - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-advanced-sm
+              - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
+              - ti,am654-evm
           - const: ti,am654
 
+      - description: K3 AM69 SoC Toradex Aquila Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,aquila-am69-clover   # Aquila AM69 Module on Clover Board
+              - toradex,aquila-am69-dev      # Aquila AM69 Module on Aquila Development Board
+          - const: toradex,aquila-am69       # Aquila AM69 Module
+          - const: ti,j784s4
+
+      - description: K3 J7200 SoC
+        oneOf:
+          - const: ti,j7200
+          - items:
+              - enum:
+                  - ti,j7200-evm
+              - const: ti,j7200
+
       - description: K3 J721E SoC
         oneOf:
           - const: ti,j721e
           - items:
               - enum:
+                  - beagle,j721e-beagleboneai64
                   - ti,j721e-evm
                   - ti,j721e-sk
               - const: ti,j721e
 
-      - description: K3 J7200 SoC
-        oneOf:
-          - const: ti,j7200
-          - items:
-              - enum:
-                  - ti,j7200-evm
-              - const: ti,j7200
+      - description: K3 J721s2 SoC
+        items:
+          - enum:
+              - ti,am68-sk
+              - ti,j721s2-evm
+          - const: ti,j721s2
 
-      - description: K3 AM642 SoC
+      - description: K3 J721s2 SoC Phytec SoM based boards
         items:
           - enum:
-              - ti,am642-evm
-              - ti,am642-sk
-          - const: ti,am642
+              - phytec,am68-phyboard-izar
+          - const: phytec,am68-phycore-som
+          - const: ti,j721s2
+
+      - description: K3 J722S SoC and Boards
+        items:
+          - enum:
+              - beagle,am67a-beagley-ai
+              - kontron,sa67             # Kontron SMARC-sAM67 board
+              - ti,j722s-evm
+          - const: ti,j722s
+
+      - description: K3 J742S2 SoC
+        items:
+          - enum:
+              - ti,j742s2-evm
+          - const: ti,j742s2
+
+      - description: K3 J784s4 SoC
+        items:
+          - enum:
+              - ti,am69-sk
+              - ti,j784s4-evm
+          - const: ti,j784s4
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
new file mode 100644
index 000000000000..14f1b9d8f59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/omap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OMAP SoC architecture
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: Platforms based on Texas Instruments OMAP SoC architecture.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: TI OMAP2420 SoC based platforms
+        items:
+          - enum:
+              - nokia,n800
+              - nokia,n810
+              - nokia,n810-wimax
+              - ti,omap2420-h4
+          - const: ti,omap2420
+          - const: ti,omap2
+
+      - description: TI OMAP2430 SoC based platforms
+        items:
+          - enum:
+              - ti,omap2430-sdp # TI OMAP2430 SDP
+          - const: ti,omap2430
+          - const: ti,omap2
+
+      - description: TI OMAP3430 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap3-cm-t3530
+              - logicpd,dm3730-som-lv-devkit  # LogicPD Zoom OMAP35xx SOM-LV Development Kit
+              - logicpd,dm3730-torpedo-devkit # LogicPD Zoom OMAP35xx Torpedo Development Kit
+              - nokia,omap3-n900
+              - openpandora,omap3-pandora-600mhz
+              - ti,omap3430-sdp
+              - ti,omap3-beagle
+              - ti,omap3-evm                  # TI OMAP35XX EVM (TMDSEVM3530)
+              - ti,omap3-ldp                  # TI OMAP3430 LDP (Zoom1 Labrador)
+              - timll,omap3-devkit8000
+          - const: ti,omap3430
+          - const: ti,omap3
+
+      - description: Early BeagleBoard revisions A to B4 with a timer quirk
+        items:
+          - const: ti,omap3-beagle-ab4
+          - const: ti,omap3-beagle
+          - const: ti,omap3430
+          - const: ti,omap3
+
+      - description: Gumstix Overo TI OMAP 3430/3630 boards + expansion boards
+        items:
+          - enum:
+              - gumstix,omap3-overo-alto35
+              - gumstix,omap3-overo-chestnut43
+              - gumstix,omap3-overo-gallop43
+              - gumstix,omap3-overo-palo35
+              - gumstix,omap3-overo-palo43
+              - gumstix,omap3-overo-summit
+              - gumstix,omap3-overo-tobi
+              - gumstix,omap3-overo-tobiduo
+          - const: gumstix,omap3-overo
+          - enum:
+              - ti,omap3430
+              - ti,omap3630
+
+      - description: TI OMAP3630 SoC based platforms
+        items:
+          - enum:
+              - amazon,omap3-echo             # Amazon Echo (first generation)
+              - compulab,omap3-cm-t3730
+              - goldelico,gta04
+              - lg,omap3-sniper               # LG Optimus Black
+              - logicpd,dm3730-som-lv-devkit  # LogicPD Zoom DM3730 SOM-LV Development Kit
+              - logicpd,dm3730-torpedo-devkit # LogicPD Zoom DM3730 Torpedo + Wireless Development Kit
+              - nokia,omap3-n9
+              - nokia,omap3-n950
+              - openpandora,omap3-pandora-1ghz
+              - ti,omap3-beagle-xm
+              - ti,omap3-evm-37xx             # TI OMAP37XX EVM (TMDSEVM3730)
+              - ti,omap3-zoom3
+          - const: ti,omap3630
+          - const: ti,omap3
+
+      - description: TI AM35 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap3-sbc-t3517 # CompuLab SBC-T3517 with CM-T3517
+              - teejet,mt_ventoux
+              - ti,am3517-craneboard     # TI AM3517 CraneBoard (TMDSEVM3517)
+              - ti,am3517-evm            # TI AM3517 EVM (AM3517/05 TMDSEVM3517)
+          - const: ti,am3517
+          - const: ti,omap3
+
+      - description: TI AM33 based platform
+        items:
+          - enum:
+              - compulab,cm-t335
+              - moxa,uc-8100-me-t
+              - novatech,am335x-lxm
+              - seeed,am335x-bone-green-eco
+              - ti,am335x-bone
+              - ti,am335x-evm
+              - ti,am3359-icev2
+          - const: ti,am33xx
+
+      - description: Compulab board variants based on TI AM33
+        items:
+          - enum:
+              - compulab,sbc-t335
+          - const: compulab,cm-t335
+          - const: ti,am33xx
+
+      - description: Phytec boards based on TI AM33
+        items:
+          - enum:
+              - phytec,am335x-wega
+              - phytec,am335x-pcm-953
+              - phytec,am335x-regor
+          - const: phytec,am335x-phycore-som
+          - const: ti,am33xx
+
+      - description: TQ-Systems TQMa335x[L] SoM
+        items:
+          - enum:
+              - tq,tqma3359-mba335x # MBa335x carrier board
+          - const: tq,tqma3359
+          - const: ti,am33xx
+
+      - description: TI OMAP4430 SoC based platforms
+        items:
+          - enum:
+              - amazon,omap4-kc1        # Amazon Kindle Fire (first generation)
+              - motorola,droid4         # Motorola Droid 4 XT894
+              - motorola,droid-bionic   # Motorola Droid Bionic XT875
+              - motorola,xyboard-mz609
+              - motorola,xyboard-mz617
+              - ti,omap4-panda
+              - ti,omap4-sdp
+          - const: ti,omap4430
+          - const: ti,omap4
+
+      - description: OMAP4 PandaBoard Revision A4 and later
+        items:
+          - const: ti,omap4-panda-a4
+          - const: ti,omap4-panda
+          - const: ti,omap4430
+          - const: ti,omap4
+
+      - description: OMAP4 DuoVero with Parlor expansion board/daughter board
+        items:
+          - const: gumstix,omap4-duovero-parlor
+          - const: gumstix,omap4-duovero
+          - const: ti,omap4430
+          - const: ti,omap4
+
+      - description: TI OMAP4460 SoC based platforms
+        items:
+          - enum:
+              - epson,embt2ws    # Epson Moverio BT-200
+              - ti,omap4-panda-es
+          - const: ti,omap4460
+          - const: ti,omap4
+
+      - description: VAR-OM44 boards
+        items:
+          - enum:
+              - variscite,var-dvk-om44
+              - variscite,var-stk-om44
+          - const: variscite,var-som-om44
+          - const: ti,omap4460
+          - const: ti,omap4
+
+      - description: TI OMAP5 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap5-cm-t54
+              - isee,omap5-igep0050
+              - ti,omap5-uevm
+          - const: ti,omap5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
index c022d325fc08..1656d1a4476f 100644
--- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DaVinci Platforms Device Tree Bindings
+title: Texas Instruments DaVinci Platforms
 
 maintainers:
   - Sekhar Nori <nsekhar@ti.com>
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml b/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml
new file mode 100644
index 000000000000..20d4084f4506
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/ti,keystone.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone Platforms
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+  - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: K2G
+        items:
+          - enum:
+              - ti,k2g-evm
+              - ti,k2g-ice
+          - const: ti,k2g
+          - const: ti,keystone
+      - description: Keystone 2 Edison
+        items:
+          - enum:
+              - ti,k2e-evm
+          - const: ti,k2e
+          - const: ti,keystone
+      - description: Keystone 2 Lamarr
+        items:
+          - enum:
+              - ti,k2l-evm
+          - const: ti,k2l
+          - const: ti,keystone
+      - description: Keystone 2 Hawking/Kepler
+        items:
+          - enum:
+              - ti,k2hk-evm
+          - const: ti,k2hk
+          - const: ti,keystone
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
index 9c1cacbdc916..716ba4a3cab4 100644
--- a/Documentation/devicetree/bindings/arm/toshiba.yaml
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/toshiba.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba Visconti Platform Device Tree Bindings
+title: Toshiba Visconti Platform
 
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
diff --git a/Documentation/devicetree/bindings/arm/trbe.yaml b/Documentation/devicetree/bindings/arm/trbe.yaml
deleted file mode 100644
index 4402d7bfd1fc..000000000000
--- a/Documentation/devicetree/bindings/arm/trbe.yaml
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2021, Arm Ltd
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/arm/trbe.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: ARM Trace Buffer Extensions
-
-maintainers:
-  - Anshuman Khandual <anshuman.khandual@arm.com>
-
-description: |
-  Arm Trace Buffer Extension (TRBE) is a per CPU component
-  for storing trace generated on the CPU to memory. It is
-  accessed via CPU system registers. The software can verify
-  if it is permitted to use the component by checking the
-  TRBIDR register.
-
-properties:
-  $nodename:
-    const: "trbe"
-  compatible:
-    items:
-      - const: arm,trace-buffer-extension
-
-  interrupts:
-    description: |
-       Exactly 1 PPI must be listed. For heterogeneous systems where
-       TRBE is only supported on a subset of the CPUs, please consult
-       the arm,gic-v3 binding for details on describing a PPI partition.
-    maxItems: 1
-
-required:
-  - compatible
-  - interrupts
-
-additionalProperties: false
-
-examples:
-
-  - |
-   #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-   trbe {
-     compatible = "arm,trace-buffer-extension";
-     interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-   };
-...
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
index 5db7cfba81a4..b42d20fa4359 100644
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ux500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ux500 platforms device tree bindings
+title: Ux500 platforms
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -20,6 +20,11 @@ properties:
           - const: st-ericsson,mop500
           - const: st-ericsson,u8500
 
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
       - description: ST-Ericsson HREF (v60+)
         items:
           - const: st-ericsson,hrefv60+
@@ -30,9 +35,39 @@ properties:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
 
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Exhibit (SGH-T599)
+        items:
+          - const: samsung,codina-tmo
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
       - description: Samsung Galaxy S III mini (GT-I8190)
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
 
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
deleted file mode 100644
index a4f15262d717..000000000000
--- a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-ARM Versatile system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,versatile-sysreg", "syscon"
-- reg : physical base address and the size of the registers window
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 000000000000..b74380da3198
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control register block, acting as a bridge to the
+  platform's configuration bus via "system control" interface, addressing
+  devices with site number, position in the board stack, config controller,
+  function and device numbers - see motherboard's TRM for more details.
+
+properties:
+  compatible:
+    const: arm,vexpress,config-bus
+
+  arm,vexpress,config-bridge:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the sysreg node.
+
+  muxfpga:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-muxfpga
+
+      arm,vexpress-sysreg,func:
+        description: FPGA specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 7
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  shutdown:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-shutdown
+
+      arm,vexpress-sysreg,func:
+        description: shutdown identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 8
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  reboot:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reboot
+
+      arm,vexpress-sysreg,func:
+        description: reboot identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 9
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  dvimode:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-dvimode
+
+      arm,vexpress-sysreg,func:
+        description: DVI mode identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 11
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+  - compatible
+  - arm,vexpress,config-bridge
+
+patternProperties:
+  'clk[0-9]*$':
+    type: object
+    description:
+      clocks
+
+    properties:
+      compatible:
+        const: arm,vexpress-osc
+
+      arm,vexpress-sysreg,func:
+        description: clock specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 1
+          - description: clock number
+
+      freq-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimal clock frequency
+          - description: maximum clock frequency
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+      - "#clock-cells"
+
+  "^volt-.+$":
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        const: arm,vexpress-volt
+
+      arm,vexpress-sysreg,func:
+        description: regulator specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 2
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    unevaluatedProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^amp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-amp
+
+      arm,vexpress-sysreg,func:
+        description: current sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 3
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^temp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-temp
+
+      arm,vexpress-sysreg,func:
+        description: temperature sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 4
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^reset[0-9]*$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reset
+
+      arm,vexpress-sysreg,func:
+        description: reset specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 5
+          - description: reset device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^power-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-power
+
+      arm,vexpress-sysreg,func:
+        description: power sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 12
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^energy(-.+)?$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-energy
+
+      arm,vexpress-sysreg,func:
+        description: energy sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 13
+              - description: device number
+          - items:
+              - const: 13
+              - description: device number
+              - const: 13
+              - description: second device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+examples:
+  - |
+    mcc {
+        compatible = "arm,vexpress,config-bus";
+        arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+        clk0 {
+            compatible = "arm,vexpress-osc";
+            arm,vexpress-sysreg,func = <1 0>;
+            #clock-cells = <0>;
+        };
+
+        energy {
+            compatible = "arm,vexpress-energy";
+            arm,vexpress-sysreg,func = <13 0>, <13 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 50095802fb4a..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-
-Deprecated properties, replaced by GPIO subnodes (see below):
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
-  - first cell is the pseudo-GPIO line number:
-    0 - MMC CARDIN
-    1 - MMC WPROT
-    2 - NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Control registers providing pseudo-GPIO lines must be represented
-by subnodes, each of them requiring the following properties:
-- compatible value : one of
-			"arm,vexpress-sysreg,sys_led"
-			"arm,vexpress-sysreg,sys_mci"
-			"arm,vexpress-sysreg,sys_flash"
-- gpio-controller : makes the node a GPIO controller
-- #gpio-cells : size of the GPIO specifier, must be 2:
-  - first cell is the function number:
-    - for sys_led : 0..7 = LED 0..7
-    - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
-    - for sys_flash : 0 = NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Example:
-	v2m_sysreg: sysreg@10000000 {
- 		compatible = "arm,vexpress-sysreg";
- 		reg = <0x10000000 0x1000>;
-
-		v2m_led_gpios: sys_led@8 {
-			compatible = "arm,vexpress-sysreg,sys_led";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_mmc_gpios: sys_mci@48 {
-			compatible = "arm,vexpress-sysreg,sys_mci";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_flash_gpios: sys_flash@4c {
-			compatible = "arm,vexpress-sysreg,sys_flash";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
- 	};
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details. All configuration
-controller accessible via this interface must reference the sysreg
-node via "arm,vexpress,config-bridge" phandle and define appropriate
-topology properties - see main vexpress node documentation for more
-details. Each child of such node describes one function and must
-define the following properties:
-- compatible value : must be one of (corresponding to the TRM):
-	"arm,vexpress-amp"
-	"arm,vexpress-dvimode"
-	"arm,vexpress-energy"
-	"arm,vexpress-muxfpga"
-	"arm,vexpress-osc"
-	"arm,vexpress-power"
-	"arm,vexpress-reboot"
-	"arm,vexpress-reset"
-	"arm,vexpress-scc"
-	"arm,vexpress-shutdown"
-	"arm,vexpress-temp"
-	"arm,vexpress-volt"
-- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
-  - first cell of each group defines the function number
-    (eg. 1 for clock generator, 2 for voltage regulators etc.)
-  - second cell of each group defines device number (eg. osc 0,
-    osc 1 etc.)
-  - some functions (eg. energy meter, with its 64 bit long counter)
-    are using more than one function/device number pair
-
-Example:
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-		};
-
-		energy@0 {
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 000000000000..be6e3b542569
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    const: arm,vexpress-sysreg
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  gpio-controller:
+    deprecated: true
+
+  "#gpio-cells":
+    deprecated: true
+    const: 2
+
+additionalProperties: false
+
+patternProperties:
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      GPIO children
+
+    properties:
+      compatible:
+        enum:
+          - arm,vexpress-sysreg,sys_led
+          - arm,vexpress-sysreg,sys_mci
+          - arm,vexpress-sysreg,sys_flash
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description: |
+          The first cell is the function number:
+          for sys_led : 0..7 = LED 0..7
+          for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+          for sys_flash : 0 = NOR FLASH WPn
+          The second cell can take standard GPIO flags.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,vexpress-sysreg";
+        reg = <0x00000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1000>;
+
+        v2m_led_gpios: gpio@8 {
+            compatible = "arm,vexpress-sysreg,sys_led";
+            reg = <0x008 4>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml
index 7b762bfc11e7..fa47b8989bbf 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ b/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/arm/vt8500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+title: VIA/Wondermedia VT8500 Platforms
 
 maintainers:
-  - Tony Prisk <linux@prisktech.co.nz>
-description: test
+  - Alexey Charkov <alchark@gmail.com>
 
 properties:
   $nodename:
     const: '/'
   compatible:
-    items:
+    oneOf:
       - enum:
           - via,vt8500
           - wm,wm8505
@@ -22,4 +21,9 @@ properties:
           - wm,wm8750
           - wm,wm8850
 
+      - description: VIA APC Rock and Paper boards
+        items:
+          - const: via,apc-rock
+          - const: wm,wm8950
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index db5c56db30ec..f925290d4641 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -7,15 +7,17 @@ the following properties:
 	compatible = "xen,xen-<version>", "xen,xen";
   where <version> is the version of the Xen ABI of the platform.
 
-- reg: specifies the base physical address and size of a region in
-  memory where the grant table should be mapped to, using an
-  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
-  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
-  This property is unnecessary when booting Dom0 using ACPI.
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
 
 - interrupts: the interrupt used by Xen to inject event notifications.
   A GIC node is also required.
-  This property is unnecessary when booting Dom0 using ACPI.
 
 To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
 under /hypervisor with following parameters:
@@ -54,7 +56,7 @@ hypervisor {
 };
 
 The format and meaning of the "xen,uefi-*" parameters are similar to those in
-Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However
+Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However
 they differ because they are provided by the Xen hypervisor, together with a set
 of UEFI runtime services implemented via hypercalls, see
 http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
deleted file mode 100644
index 4dc0e0195974..000000000000
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ /dev/null
@@ -1,137 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/xilinx.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Xilinx Zynq Platforms Device Tree Bindings
-
-maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
-
-description: |
-  Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - items:
-          - enum:
-              - adapteva,parallella
-              - digilent,zynq-zybo
-              - digilent,zynq-zybo-z7
-              - ebang,ebaz4205
-              - myir,zynq-zturn-v5
-              - myir,zynq-zturn
-              - xlnx,zynq-cc108
-              - xlnx,zynq-zc702
-              - xlnx,zynq-zc706
-              - xlnx,zynq-zc770-xm010
-              - xlnx,zynq-zc770-xm011
-              - xlnx,zynq-zc770-xm012
-              - xlnx,zynq-zc770-xm013
-          - const: xlnx,zynq-7000
-
-      - items:
-          - const: avnet,zynq-microzed
-          - const: xlnx,zynq-microzed
-          - const: xlnx,zynq-7000
-
-      - items:
-          - const: avnet,zynq-zed
-          - const: xlnx,zynq-zed
-          - const: xlnx,zynq-7000
-
-      - items:
-          - enum:
-              - xlnx,zynqmp-zc1751
-          - const: xlnx,zynqmp
-
-      - description: Xilinx internal board zc1232
-        items:
-          - const: xlnx,zynqmp-zc1232-revA
-          - const: xlnx,zynqmp-zc1232
-          - const: xlnx,zynqmp
-
-      - description: Xilinx internal board zc1254
-        items:
-          - const: xlnx,zynqmp-zc1254-revA
-          - const: xlnx,zynqmp-zc1254
-          - const: xlnx,zynqmp
-
-      - description: Xilinx internal board zc1275
-        items:
-          - const: xlnx,zynqmp-zc1275-revA
-          - const: xlnx,zynqmp-zc1275
-          - const: xlnx,zynqmp
-
-      - description: Xilinx 96boards compatible board zcu100
-        items:
-          - const: xlnx,zynqmp-zcu100-revC
-          - const: xlnx,zynqmp-zcu100
-          - const: xlnx,zynqmp
-
-      - description: Xilinx 96boards compatible board Ultra96
-        items:
-          - const: avnet,ultra96-rev1
-          - const: avnet,ultra96
-          - const: xlnx,zynqmp-zcu100-revC
-          - const: xlnx,zynqmp-zcu100
-          - const: xlnx,zynqmp
-
-      - description: Xilinx evaluation board zcu102
-        items:
-          - enum:
-              - xlnx,zynqmp-zcu102-revA
-              - xlnx,zynqmp-zcu102-revB
-              - xlnx,zynqmp-zcu102-rev1.0
-              - xlnx,zynqmp-zcu102-rev1.1
-          - const: xlnx,zynqmp-zcu102
-          - const: xlnx,zynqmp
-
-      - description: Xilinx evaluation board zcu104
-        items:
-          - enum:
-              - xlnx,zynqmp-zcu104-revA
-              - xlnx,zynqmp-zcu104-revC
-              - xlnx,zynqmp-zcu104-rev1.0
-          - const: xlnx,zynqmp-zcu104
-          - const: xlnx,zynqmp
-
-      - description: Xilinx evaluation board zcu106
-        items:
-          - enum:
-              - xlnx,zynqmp-zcu106-revA
-              - xlnx,zynqmp-zcu106-rev1.0
-          - const: xlnx,zynqmp-zcu106
-          - const: xlnx,zynqmp
-
-      - description: Xilinx evaluation board zcu111
-        items:
-          - enum:
-              - xlnx,zynqmp-zcu111-revA
-              - xlnx,zynqmp-zcu111-rev1.0
-          - const: xlnx,zynqmp-zcu111
-          - const: xlnx,zynqmp
-
-      - description: Xilinx Kria SOMs
-        items:
-          - const: xlnx,zynqmp-sm-k26-rev1
-          - const: xlnx,zynqmp-sm-k26-revB
-          - const: xlnx,zynqmp-sm-k26-revA
-          - const: xlnx,zynqmp-sm-k26
-          - const: xlnx,zynqmp
-
-      - description: Xilinx Kria SOMs (starter)
-        items:
-          - const: xlnx,zynqmp-smk-k26-rev1
-          - const: xlnx,zynqmp-smk-k26-revB
-          - const: xlnx,zynqmp-smk-k26-revA
-          - const: xlnx,zynqmp-smk-k26
-          - const: xlnx,zynqmp
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-  - phys: phandle for the PHY device
-  - resets: phandle to the reset controller for the SATA IP
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
-		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 000000000000..38770c4c85fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
deleted file mode 100644
index 5f8193417725..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-da850.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Device tree binding for the TI DA850 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,da850-ahci"
-  - reg: physical base addresses and sizes of the two register regions
-         used by the controller: the register map as defined by the
-         AHCI 1.1 standard and the Power Down Control Register (PWRDN)
-         for enabling/disabling the SATA clock receiver
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-
-Example:
-
-	sata: sata@218000 {
-		compatible = "ti,da850-ahci";
-		reg = <0x218000 0x2000>, <0x22c018 0x4>;
-		interrupts = <67>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-dm816.txt b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
deleted file mode 100644
index f8c535f3541f..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-dm816.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device tree binding for the TI DM816 AHCI SATA Controller
----------------------------------------------------------
-
-Required properties:
-  - compatible: must be "ti,dm816-ahci"
-  - reg: physical base address and size of the register region used by
-         the controller (as defined by the AHCI 1.1 standard)
-  - interrupts: interrupt specifier (refer to the interrupt binding)
-  - clocks: list of phandle and clock specifier pairs (or only
-            phandles for clock providers with '0' defined for
-            #clock-cells); two clocks must be specified: the functional
-            clock and an external reference clock
-
-Example:
-
-	sata: sata@4a140000 {
-		compatible = "ti,dm816-ahci";
-		reg = <0x4a140000 0x10000>;
-		interrupts = <16>;
-		clocks = <&sysclk5_ck>, <&sata_refclk>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
deleted file mode 100644
index 7c3ca0e13de0..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for Freescale QorIQ AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-
-Optional properties:
-  - dma-coherent: Enable AHCI coherent DMA operation.
-  - reg-names: register area names when there are more than 1 register area.
-
-Examples:
-	sata@3200000 {
-		compatible = "fsl,ls1021a-ahci";
-		reg = <0x0 0x3200000 0x0 0x10000>;
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&platform_clk 1>;
-		dma-coherent;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696b161b..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
-		     When using "mediatek,mtk-ahci" compatible strings, you
-		     need SoC specific ones in addition, one of:
-		     - "mediatek,mt7622-ahci"
- - reg		   : Physical base addresses and length of register sets.
- - interrupts	   : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks	   : A list of phandle and clock specifier pairs, one for each
-		     entry in clock-names.
- - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys		   : A phandle and PHY specifier pair for the PHY port.
- - phy-names	   : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains   : A phandle and power domain specifier pair to the power
-		     domain which is responsible for collapsing and restoring
-		     power to the peripheral.
- - resets	   : Must contain an entry for each entry in reset-names.
-		     See ../reset/reset.txt for details.
- - reset-names	   : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
-		       SATA function.
-
-Example:
-
-	sata: sata@1a200000 {
-		compatible = "mediatek,mt7622-ahci",
-			     "mediatek,mtk-ahci";
-		reg = <0 0x1a200000 0 0x1100>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hostc";
-		clocks = <&pciesys CLK_SATA_AHB_EN>,
-			 <&pciesys CLK_SATA_AXI_EN>,
-			 <&pciesys CLK_SATA_ASIC_EN>,
-			 <&pciesys CLK_SATA_RBC_EN>,
-			 <&pciesys CLK_SATA_PM_EN>;
-		clock-names = "ahb", "axi", "asic", "rbc", "pm";
-		phys = <&u3port1 PHY_TYPE_SATA>;
-		phy-names = "sata-phy";
-		ports-implemented = <0x1>;
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-			 <&pciesys MT7622_SATA_PHY_SW_RST>,
-			 <&pciesys MT7622_SATA_PHY_REG_RST>;
-		reset-names = "axi", "sw", "reg";
-		mediatek,phy-mode = <&pciesys>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a277642..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible        : compatible string, one of:
-  - "brcm,iproc-ahci"
-  - "hisilicon,hisi-ahci"
-  - "cavium,octeon-7130-ahci"
-  - "ibm,476gtr-ahci"
-  - "marvell,armada-380-ahci"
-  - "marvell,armada-3700-ahci"
-  - "snps,dwc-ahci"
-  - "snps,spear-ahci"
-  - "generic-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
-	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
-- target-supply     : regulator for SATA target power
-- phy-supply        : regulator for PHY power
-- phys              : reference to the SATA PHY node
-- phy-names         : must be "sata-phy"
-- ahci-supply       : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
-		      are available for software to use. Useful if PORTS_IMPL
-		      is not programmed by the BIOS, which is true with
-		      some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells    : number of cells to encode an address
-- #size-cells       : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg		    : the port number
-And at least one of the following properties:
-- phys		    : reference to the SATA PHY node
-- target-supply     : regulator for SATA target power
-
-Examples:
-        sata@ffe08000 {
-		compatible = "snps,spear-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-        };
-
-With sub-nodes:
-	sata@f7e90000 {
-		compatible = "marvell,berlin2q-achi", "generic-ahci";
-		reg = <0xe90000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&chip CLKID_SATA>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-			target-supply = <&reg_sata0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-			target-supply = <&reg_sata1>;;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 000000000000..cc35cdc02840
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+
+description: |
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+  It is possible, but not required, to represent each port as a sub-node.
+  It allows to enable each port independently when dealing with multiple
+  PHYs.
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Jens Axboe <axboe@kernel.dk>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-ahci
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+          - marvell,armada-8k-ahci
+          - marvell,berlin2q-ahci
+          - qcom,apq8064-ahci
+          - qcom,ipq806x-ahci
+          - socionext,uniphier-pro4-ahci
+          - socionext,uniphier-pxs2-ahci
+          - socionext,uniphier-pxs3-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,iproc-ahci
+              - marvell,armada-8k-ahci
+              - marvell,berlin2-ahci
+              - marvell,berlin2q-ahci
+              - qcom,apq8064-ahci
+              - qcom,ipq806x-ahci
+              - socionext,uniphier-pro4-ahci
+              - socionext,uniphier-pxs2-ahci
+              - socionext,uniphier-pxs3-ahci
+          - const: generic-ahci
+      - enum:
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    anyOf:
+      - required: [ phys ]
+      - required: [ target-supply ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8064-ahci
+              - qcom,ipq806x-ahci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: slave_iface
+            - const: iface
+            - const: core
+            - const: rxoob
+            - const: pmalive
+      required:
+        - phys
+        - phy-names
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset line for the parent
+            - description: reset line for the glue logic
+            - description: reset line for the controller
+      required:
+        - resets
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pxs2-ahci
+                - socionext,uniphier-pxs3-ahci
+      then:
+        properties:
+          resets:
+            items:
+              - description: reset for the glue logic
+              - description: reset for the controller
+        required:
+          - resets
+      else:
+        properties:
+          resets:
+            maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "snps,spear-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@f7e90000 {
+        compatible = "marvell,berlin2q-ahci", "generic-ahci";
+        reg = <0xf7e90000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_SATA>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hba-cap = <HBA_SMPS>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+
+            phys = <&sata_phy 0>;
+            target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+
+            phys = <&sata_phy 1>;
+            target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
deleted file mode 100644
index 909c9935360d..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-STMicroelectronics STi SATA controller
-
-This binding describes a SATA device.
-
-Required properties:
- - compatible	   : Must be "st,ahci"
- - reg		   : Physical base addresses and length of register sets
- - interrupts	   : Interrupt associated with the SATA device
- - interrupt-names :   Associated name must be; "hostc"
- - clocks	   : The phandle for the clock
- - clock-names	   :   Associated name must be; "ahci_clk"
- - phys		   : The phandle for the PHY port
- - phy-names	   :   Associated name must be; "ahci_phy"
-
-Optional properties:
- - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
- - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
-
-Example:
-
-	/* Example for stih407 family silicon */
-	sata0: sata@9b20000 {
-		compatible	= "st,ahci";
-		reg		= <0x9b20000 0x1000>;
-		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
-		interrupt-names	= "hostc";
-		phys		= <&phy_port0 PHY_TYPE_SATA>;
-		phy-names	= "ahci_phy";
-		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
-				  <&softreset STIH407_SATA0_SOFTRESET>,
-				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
-		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
-		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
-		clock-names	= "ahci_clk";
-	};
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
index cb530b46beff..2011bd03cdcd 100644
--- a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHCI SATA Controller bindings
+title: Allwinner A10 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
index e6b42a113ff1..a2afe2ad6063 100644
--- a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 AHCI SATA Controller bindings
+title: Allwinner R40 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml b/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml
new file mode 100644
index 000000000000..dc631381f9e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm,xgene-ahci.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/apm,xgene-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene 6.0 Gb/s SATA host controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - apm,xgene-ahci
+      - apm,xgene-ahci-v2
+
+  reg:
+    minItems: 4
+    items:
+      - description: AHCI memory resource
+      - description: Host controller core
+      - description: Host controller diagnostic
+      - description: Host controller AXI
+      - description: Host controller MUX
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apm,xgene-ahci
+    then:
+      required:
+        - clocks
+        - phys
+        - phy-names
+
+examples:
+  - |
+    sata@1a400000 {
+        compatible = "apm,xgene-ahci";
+        reg = <0x1a400000 0x1000>,
+              <0x1f220000 0x1000>,
+              <0x1f22d000 0x1000>,
+              <0x1f22e000 0x1000>,
+              <0x1f227000 0x1000>;
+        clocks = <&sataclk 0>;
+        dma-coherent;
+        interrupts = <0x0 0x87 0x4>;
+        phys = <&phy2 0>;
+        phy-names = "sata-phy";
+    };
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
deleted file mode 100644
index 02e690a675db..000000000000
--- a/Documentation/devicetree/bindings/ata/apm-xgene.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* APM X-Gene 6.0 Gb/s SATA host controller nodes
-
-SATA host controller nodes are defined to describe on-chip Serial ATA
-controllers. Each SATA controller (pair of ports) have its own node.
-
-Required properties:
-- compatible		: Shall contain:
-  * "apm,xgene-ahci"
-- reg			: First memory resource shall be the AHCI memory
-			  resource.
-			  Second memory resource shall be the host controller
-			  core memory resource.
-			  Third memory resource shall be the host controller
-			  diagnostic memory resource.
-			  4th memory resource shall be the host controller
-			  AXI memory resource.
-			  5th optional memory resource shall be the host
-			  controller MUX memory resource if required.
-- interrupts		: Interrupt-specifier for SATA host controller IRQ.
-- clocks		: Reference to the clock entry.
-- phys			: A list of phandles + phy-specifiers, one for each
-			  entry in phy-names.
-- phy-names		: Should contain:
-  * "sata-phy" for the SATA 6.0Gbps PHY
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent
-- status		: Shall be "ok" if enabled or "disabled" if disabled.
-			  Default is "ok".
-
-Example:
-		sataclk: sataclk {
-			compatible = "fixed-clock";
-			#clock-cells = <1>;
-			clock-frequency = <100000000>;
-			clock-output-names = "sataclk";
-		};
-
-		phy2: phy@1f22a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f22a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		phy3: phy@1f23a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f23a000 0x0 0x100>;
-			#phy-cells = <1>;
-		};
-
-		sata2: sata@1a400000 {
-			compatible = "apm,xgene-ahci";
-			reg = <0x0 0x1a400000 0x0 0x1000>,
-			      <0x0 0x1f220000 0x0 0x1000>,
-			      <0x0 0x1f22d000 0x0 0x1000>,
-			      <0x0 0x1f22e000 0x0 0x1000>,
-			      <0x0 0x1f227000 0x0 0x1000>;
-			interrupts = <0x0 0x87 0x4>;
-			dma-coherent;
-			clocks = <&sataclk 0>;
-			phys = <&phy2 0>;
-			phy-names = "sata-phy";
-		};
-
-		sata3: sata@1a800000 {
-			compatible = "apm,xgene-ahci-pcie";
-			reg = <0x0 0x1a800000 0x0 0x1000>,
-			      <0x0 0x1f230000 0x0 0x1000>,
-			      <0x0 0x1f23d000 0x0 0x1000>,
-			      <0x0 0x1f23e000 0x0 0x1000>,
-			      <0x0 0x1f237000 0x0 0x1000>;
-			interrupts = <0x0 0x88 0x4>;
-			dma-coherent;
-			clocks = <&sataclk 0>;
-			phys = <&phy3 0>;
-			phy-names = "sata-phy";
-		};
diff --git a/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml b/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml
new file mode 100644
index 000000000000..4d7017452dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/arasan,cf-spear1340.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/arasan,cf-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan PATA Compact Flash Controller
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+properties:
+  compatible:
+    const: arasan,cf-spear1340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  arasan,broken-udma:
+    description: UDMA mode is unusable
+    type: boolean
+
+  arasan,broken-mwdma:
+    description: MWDMA mode is unusable
+    type: boolean
+
+  arasan,broken-pio:
+    description: PIO mode is unusable
+    type: boolean
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: data
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        required:
+          - arasan,broken-udma
+          - arasan,broken-mwdma
+    then:
+      required:
+        - dmas
+        - dma-names
+
+examples:
+  - |
+    cf@fc000000 {
+        compatible = "arasan,cf-spear1340";
+        reg = <0xfc000000 0x1000>;
+        interrupts = <12>;
+        dmas = <&dma 23>;
+        dma-names = "data";
+    };
diff --git a/Documentation/devicetree/bindings/ata/ata-generic.yaml b/Documentation/devicetree/bindings/ata/ata-generic.yaml
new file mode 100644
index 000000000000..0697927f3d7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ata-generic.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ata-generic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel ATA Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Generic Parallel ATA controllers supporting PIO modes only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,vexpress-cf
+          - fsl,mpc8349emitx-pata
+      - const: ata-generic
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  reg-shift:
+    enum: [ 1, 2 ]
+
+  interrupts:
+    maxItems: 1
+
+  ata-generic,use16bit:
+    type: boolean
+    description: Use 16-bit accesses instead of 32-bit for data transfers
+
+  pio-mode:
+    description: Maximum ATA PIO transfer mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    compact-flash@1a000 {
+        compatible = "arm,vexpress-cf", "ata-generic";
+        reg = <0x1a000 0x100>,
+              <0x1a100 0xf00>;
+        reg-shift = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3ae134..000000000000
--- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Atmel AT91RM9200 CompactFlash
-
-Required properties:
-- compatible : "atmel,at91rm9200-cf".
-- reg : should specify localbus address and size used.
-- gpios : specifies the gpio pins to control the CF device. Detect
-  and reset gpio's are mandatory while irq and vcc gpio's are
-  optional and may be set to 0 if not present.
-
-Example:
-compact-flash@50000000 {
-	compatible = "atmel,at91rm9200-cf";
-	reg = <0x50000000 0x30000000>;
-	gpios = <&pioC 13 0	/* irq */
-		 &pioC 15 0 	/* detect */
-		 0		/* vcc */
-		 &pioC  5 0	/* reset */
-		>;
-};
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 000000000000..9b7ca4759bd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0a0..000000000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 000000000000..fe7f091e744f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml b/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml
new file mode 100644
index 000000000000..349f289b81e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cavium,ebt3000-compact-flash.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cavium,ebt3000-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Compact Flash
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  The Cavium Compact Flash device is connected to the Octeon Boot Bus, and is
+  thus a child of the Boot Bus device.  It can read and write industry standard
+  compact flash devices.
+
+properties:
+  compatible:
+    const: cavium,ebt3000-compact-flash
+
+  reg:
+    description: The base address of the CF chip select banks.
+    items:
+      - description: CF chip select bank 0
+      - description: CF chip select bank 1
+
+  cavium,bus-width:
+    description: The width of the connection to the CF devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  cavium,true-ide:
+    description: True IDE mode when present.
+    type: boolean
+
+  cavium,dma-engine-handle:
+    description: A phandle for the DMA Engine connected to this device.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        compact-flash@5,0 {
+            compatible = "cavium,ebt3000-compact-flash";
+            reg = <5 0 0x10000>, <6 0 0x10000>;
+            cavium,bus-width = <16>;
+            cavium,true-ide;
+            cavium,dma-engine-handle = <&dma0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
deleted file mode 100644
index 3bacc8e0931e..000000000000
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Compact Flash
-
-The Cavium Compact Flash device is connected to the Octeon Boot Bus,
-and is thus a child of the Boot Bus device.  It can read and write
-industry standard compact flash devices.
-
-Properties:
-- compatible: "cavium,ebt3000-compact-flash";
-
-  Compatibility with many Cavium evaluation boards.
-
-- reg: The base address of the CF chip select banks.  Depending on
-  the device configuration, there may be one or two banks.
-
-- cavium,bus-width: The width of the connection to the CF devices.  Valid
-  values are 8 and 16.
-
-- cavium,true-ide: Optional, if present the CF connection is in True IDE mode.
-
-- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected
-  to this device.
-
-Example:
-	compact-flash@5,0 {
-		compatible = "cavium,ebt3000-compact-flash";
-		reg = <5 0 0x10000>, <6 0 0x10000>;
-		cavium,bus-width = <16>;
-		cavium,true-ide;
-		cavium,dma-engine-handle = <&dma0>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..c92341888a28
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk 22>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
new file mode 100644
index 000000000000..8130923fdc72
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cirrus,ep9312-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP9312 PATA controller
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9312-pata
+      - items:
+          - const: cirrus,ep9315-pata
+          - const: cirrus,ep9312-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ide@800a0000 {
+        compatible = "cirrus,ep9312-pata";
+        reg = <0x800a0000 0x38>;
+        interrupt-parent = <&vic1>;
+        interrupts = <8>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&ide_default_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
deleted file mode 100644
index 1c3d3cc70051..000000000000
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 000000000000..529093666508
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+
+  cortina,gemini-ata-muxmode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+      - 2
+      - 3
+    description: |
+      Tell the desired multiplexing mode for the ATA controller and SATA
+      bridges.
+      Mode 0: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata0 slave interface brought out on IDE pads
+      Mode 1: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata1 slave interface brought out on IDE pads
+      Mode 2: ata1 master <-> sata1
+              ata1 slave  <-> sata0
+              ata0 master and slave interfaces brought out on IDE pads
+      Mode 3: ata0 master <-> sata0
+              ata0 slave  <-> sata1
+              ata1 master and slave interfaces brought out on IDE pads
+
+  cortina,gemini-enable-ide-pins:
+    type: boolean
+    description: Enables the PATA to IDE connection.
+      The muxmode setting decides whether ATA0 or ATA1 is brought out,
+      and whether master, slave or both interfaces get brought out.
+
+  cortina,gemini-enable-sata-bridge:
+    type: boolean
+    description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+      The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+  - clocks
+  - clock-names
+  - cortina,gemini-ata-muxmode
+  - resets
+  - reset-names
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    sata@46000000 {
+      compatible = "cortina,gemini-sata-bridge";
+      reg = <0x46000000 0x100>;
+      resets = <&rcon 26>, <&rcon 27>;
+      reset-names = "sata0", "sata1";
+      clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+               <&gcc GEMINI_CLK_GATE_SATA1>;
+      clock-names = "SATA0_PCLK", "SATA1_PCLK";
+      syscon = <&syscon>;
+      cortina,gemini-ata-muxmode = <3>;
+      cortina,gemini-enable-ide-pins;
+      cortina,gemini-enable-sata-bridge;
+    };
diff --git a/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
new file mode 100644
index 000000000000..6554e30018b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/eswin,eic7700-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SoC SATA Controller
+
+maintainers:
+  - Yulin Lu <luyulin@eswincomputing.com>
+  - Huan He <hehuan1@eswincomputing.com>
+
+description:
+  AHCI SATA controller embedded into the EIC7700 SoC is based on the DWC AHCI
+  SATA v5.00a IP core.
+
+select:
+  properties:
+    compatible:
+      const: eswin,eic7700-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: eswin,eic7700-ahci
+      - const: snps,dwc-ahci
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: arst
+
+  ports-implemented:
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@50420000 {
+        compatible = "eswin,eic7700-ahci", "snps,dwc-ahci";
+        reg = <0x50420000 0x10000>;
+        interrupt-parent = <&plic>;
+        interrupts = <58>;
+        clocks = <&clock 171>, <&clock 186>;
+        clock-names = "pclk", "aclk";
+        phys = <&sata_phy>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        resets = <&reset 96>;
+        reset-names = "arst";
+    };
diff --git a/Documentation/devicetree/bindings/ata/fsl,ahci.yaml b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
new file mode 100644
index 000000000000..ea4428bc1742
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/fsl,ahci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ AHCI SATA Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: SATA controller for ls1012a
+        items:
+          - const: fsl,ls1012a-ahci
+          - const: fsl,ls1043a-ahci
+      - enum:
+          - fsl,ls1021a-ahci
+          - fsl,ls1028a-ahci
+          - fsl,ls1043a-ahci
+          - fsl,ls1046a-ahci
+          - fsl,ls1088a-ahci
+          - fsl,ls2080a-ahci
+          - fsl,lx2160a-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: sata-ecc
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@3200000 {
+        compatible = "fsl,ls1021a-ahci";
+        reg = <0x3200000 0x10000>;
+        interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&platform_clk 1>;
+        dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
new file mode 100644
index 000000000000..324e2413bba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx31-pata
+              - fsl,imx51-pata
+          - const: fsl,imx27-pata
+      - const: fsl,imx27-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: PATA Controller interrupts
+
+  clocks:
+    items:
+      - description: PATA Controller clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pata: pata@83fe0000 {
+        compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+        reg = <0x83fe0000 0x4000>;
+        interrupts = <70>;
+        clocks = <&clks 161>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/fsl,pq-sata.yaml b/Documentation/devicetree/bindings/ata/fsl,pq-sata.yaml
new file mode 100644
index 000000000000..1d19ee832f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/fsl,pq-sata.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,pq-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale 8xxx/3.0 Gb/s SATA nodes
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,mpc8377-sata
+              - fsl,mpc8536-sata
+              - fsl,mpc8315-sata
+              - fsl,mpc8379-sata
+          - const: fsl,pq-sata
+      - const: fsl,pq-sata-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    description: |
+      1 for controller @ 0x18000
+      2 for controller @ 0x19000
+      3 for controller @ 0x1a000
+      4 for controller @ 0x1b000
+
+required:
+  - compatible
+  - interrupts
+  - cell-index
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    sata@18000 {
+        compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+        reg = <0x18000 0x1000>;
+        cell-index = <1>;
+        interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/fsl-sata.txt b/Documentation/devicetree/bindings/ata/fsl-sata.txt
deleted file mode 100644
index fd63bb3becc9..000000000000
--- a/Documentation/devicetree/bindings/ata/fsl-sata.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Freescale 8xxx/3.0 Gb/s SATA nodes
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA port should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains 2 entries, first is
-		 "fsl,CHIP-sata", where CHIP is the processor
-		 (mpc8315, mpc8379, etc.) and the second is
-		 "fsl,pq-sata"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- cell-index        : controller index.
-                          1 for controller @ 0x18000
-                          2 for controller @ 0x19000
-                          3 for controller @ 0x1a000
-                          4 for controller @ 0x1b000
-
-Optional properties:
-- reg               : <registers mapping>
-
-Example:
-	sata@18000 {
-		compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-		reg = <0x18000 0x1000>;
-		cell-index = <1>;
-		interrupts = <2c 8>;
-		interrupt-parent = < &ipic >;
-	};
diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt
deleted file mode 100644
index f1172f00188a..000000000000
--- a/Documentation/devicetree/bindings/ata/imx-pata.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Freescale i.MX PATA Controller
-
-Required properties:
-- compatible: "fsl,imx27-pata"
-- reg: Address range of the PATA Controller
-- interrupts: The interrupt of the PATA Controller
-- clocks: the clocks for the PATA Controller
-
-Example:
-
-	pata: pata@83fe0000 {
-		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
-		reg = <0x83fe0000 0x4000>;
-		interrupts = <70>;
-		clocks = <&clks 161>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.yaml b/Documentation/devicetree/bindings/ata/imx-sata.yaml
index 68ffb97ddc9b..31c43374763a 100644
--- a/Documentation/devicetree/bindings/ata/imx-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/imx-sata.yaml
@@ -19,6 +19,7 @@ properties:
       - fsl,imx53-ahci
       - fsl,imx6q-ahci
       - fsl,imx6qp-ahci
+      - fsl,imx8qm-ahci
 
   reg:
     maxItems: 1
@@ -27,12 +28,14 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
     items:
       - description: sata clock
       - description: sata reference clock
       - description: ahb clock
 
   clock-names:
+    minItems: 2
     items:
       - const: sata
       - const: sata_ref
@@ -58,6 +61,28 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
     description: if present, disable spread-spectrum clocking on the SATA link.
 
+  phys:
+    items:
+      - description: phandle to SATA PHY.
+          Since "REXT" pin is only present for first lane of i.MX8QM PHY, it's
+          calibration result will be stored, passed through second lane, and
+          shared with all three lanes PHY. The first two lanes PHY are used as
+          calibration PHYs, although only the third lane PHY is used by SATA.
+      - description: phandle to the first lane PHY of i.MX8QM.
+      - description: phandle to the second lane PHY of i.MX8QM.
+
+  phy-names:
+    items:
+      - const: sata-phy
+      - const: cali-phy0
+      - const: cali-phy1
+
+  power-domains:
+    maxItems: 1
+
+  target-supply:
+    description: Power regulator for the SATA target device.
+
 required:
   - compatible
   - reg
@@ -65,6 +90,31 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx53-ahci
+              - fsl,imx6q-ahci
+              - fsl,imx6qp-ahci
+    then:
+      properties:
+        clock-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-ahci
+    then:
+      properties:
+        clock-names:
+          minItems: 2
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
index 52e18600ecff..378692010c56 100644
--- a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -35,6 +35,7 @@ required:
 
 allOf:
   - $ref: pata-common.yaml#
+  - $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml b/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml
new file mode 100644
index 000000000000..f656ea9223d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell,orion-sata.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/marvell,orion-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SATA
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-sata
+      - marvell,armada-370-sata
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: '0'
+      - const: '1'
+      - const: '2'
+      - const: '3'
+      - const: '4'
+      - const: '5'
+      - const: '6'
+      - const: '7'
+
+  interrupts:
+    maxItems: 1
+
+  nr-ports:
+    description:
+      Number of SATA ports in use.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nr-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@80000 {
+        compatible = "marvell,orion-sata";
+        reg = <0x80000 0x5000>;
+        interrupts = <21>;
+        phys = <&sata_phy0>, <&sata_phy1>;
+        phy-names = "port0", "port1";
+        nr-ports = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
deleted file mode 100644
index b460edd12766..000000000000
--- a/Documentation/devicetree/bindings/ata/marvell.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Marvell Orion SATA
-
-Required Properties:
-- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
-- reg           : Address range of controller
-- interrupts    : Interrupt controller is using
-- nr-ports      : Number of SATA ports in use.
-
-Optional Properties:
-- phys		: List of phandles to sata phys
-- phy-names	: Should be "0", "1", etc, one number per phandle
-
-Example:
-
-	sata@80000 {
-		compatible = "marvell,orion-sata";
-		reg = <0x80000 0x5000>;
-		interrupts = <21>;
-		phys = <&sata_phy0>, <&sata_phy1>;
-		phy-names = "0", "1";
-		nr-ports = <2>;
-	}
diff --git a/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
new file mode 100644
index 000000000000..a34bd2e9c352
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/mediatek,mtk-ahci.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Serial ATA controller
+
+maintainers:
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-ahci
+      - const: mediatek,mtk-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: hostc
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: asic
+      - const: rbc
+      - const: pm
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: sw
+      - const: reg
+
+  mediatek,phy-mode:
+    description: System controller phandle, used to enable SATA function
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt7622-power.h>
+    #include <dt-bindings/reset/mt7622-reset.h>
+
+    sata@1a200000 {
+        compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci";
+        reg = <0x1a200000 0x1100>;
+        interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hostc";
+        clocks = <&pciesys CLK_SATA_AHB_EN>,
+                 <&pciesys CLK_SATA_AXI_EN>,
+                 <&pciesys CLK_SATA_ASIC_EN>,
+                 <&pciesys CLK_SATA_RBC_EN>,
+                 <&pciesys CLK_SATA_PM_EN>;
+        clock-names = "ahb", "axi", "asic", "rbc", "pm";
+        phys = <&u3port1 PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+        resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+                 <&pciesys MT7622_SATA_PHY_SW_RST>,
+                 <&pciesys MT7622_SATA_PHY_REG_RST>;
+        reset-names = "axi", "sw", "reg";
+        mediatek,phy-mode = <&pciesys>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
index 3c7a2425f3e6..a17297cbefcb 100644
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
@@ -151,7 +151,7 @@ allOf:
         - interconnects
         - power-domains
 
-additionalProperties: true
+additionalProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
deleted file mode 100644
index 872edc105680..000000000000
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* ARASAN PATA COMPACT FLASH CONTROLLER
-
-Required properties:
-- compatible: "arasan,cf-spear1340"
-- reg: Address range of the CF registers
-- interrupt: Should contain the CF interrupt number
-- clock-frequency: Interface clock rate, in Hz, one of
-       25000000
-       33000000
-       40000000
-       50000000
-       66000000
-       75000000
-      100000000
-      125000000
-      150000000
-      166000000
-      200000000
-
-Optional properties:
-- arasan,broken-udma: if present, UDMA mode is unusable
-- arasan,broken-mwdma: if present, MWDMA mode is unusable
-- arasan,broken-pio: if present, PIO mode is unusable
-- dmas: one DMA channel, as described in bindings/dma/dma.txt
-  required unless both UDMA and MWDMA mode are broken
-- dma-names: the corresponding channel name, must be "data"
-
-Example:
-
-	cf@fc000000 {
-		compatible = "arasan,cf-spear1340";
-		reg = <0xfc000000 0x1000>;
-		interrupt-parent = <&vic1>;
-		interrupts = <12>;
-		dmas = <&dma-controller 23>;
-		dma-names = "data";
-	};
diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
index 2412894a255d..4e867dd4d402 100644
--- a/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: |
   This document defines device tree properties common to most Parallel
   ATA (PATA, also known as IDE) AT attachment storage devices.
-  It doesn't constitue a device tree binding specification by itself but is
+  It doesn't constitute a device tree binding specification by itself but is
   meant to be referenced by device tree bindings.
 
   The PATA (IDE) controller-specific device tree bindings are responsible for
@@ -38,6 +38,7 @@ patternProperties:
       ID number 0 and the slave drive will have ID number 1. The PATA port
       nodes will be named "ide-port".
     type: object
+    additionalProperties: false
 
     properties:
       reg:
diff --git a/Documentation/devicetree/bindings/ata/qcom-sata.txt b/Documentation/devicetree/bindings/ata/qcom-sata.txt
deleted file mode 100644
index 094de91cd9fd..000000000000
--- a/Documentation/devicetree/bindings/ata/qcom-sata.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Qualcomm AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible		: compatible list, must contain "generic-ahci"
-- interrupts		: <interrupt mapping for SATA IRQ>
-- reg			: <registers mapping>
-- phys			: Must contain exactly one entry as specified
-			  in phy-bindings.txt
-- phy-names		: Must be "sata-phy"
-
-Required properties for "qcom,ipq806x-ahci" compatible:
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: Shall be:
-				"slave_iface" - Fabric port AHB clock for SATA
-				"iface" - AHB clock
-				"core" - core clock
-				"rxoob" - RX out-of-band clock
-				"pmalive" - Power Module Alive clock
-- assigned-clocks	: Shall be:
-				SATA_RXOOB_CLK
-				SATA_PMALIVE_CLK
-- assigned-clock-rates	: Shall be:
-				100Mhz (100000000) for SATA_RXOOB_CLK
-				100Mhz (100000000) for SATA_PMALIVE_CLK
-
-Example:
-	sata@29000000 {
-		compatible = "qcom,ipq806x-ahci", "generic-ahci";
-		reg = <0x29000000 0x180>;
-
-		interrupts = <0 209 0x0>;
-
-		clocks = <&gcc SFAB_SATA_S_H_CLK>,
-			 <&gcc SATA_H_CLK>,
-			 <&gcc SATA_A_CLK>,
-			 <&gcc SATA_RXOOB_CLK>,
-			 <&gcc SATA_PMALIVE_CLK>;
-		clock-names = "slave_iface", "iface", "core",
-				"rxoob", "pmalive";
-		assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-		assigned-clock-rates = <100000000>, <100000000>;
-
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-	};
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index c060c7914cae..fe0909554790 100644
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car Serial-ATA Interface
 
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a774e1     # RZ/G2H
               - renesas,sata-r8a7795      # R-Car H3
               - renesas,sata-r8a77965     # R-Car M3-N
           - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
new file mode 100644
index 000000000000..b5ecaabfe2e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller for Rockchip devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the Synopsys DWC
+  implementation of the AHCI SATA controller found in Rockchip
+  devices.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3576-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3576-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+      - const: snps,dwc-ahci
+
+  ports-implemented:
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  sata-port@0:
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        const: 0
+
+    unevaluatedProperties: false
+
+patternProperties:
+  "^sata-port@[1-9a-e]$": false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports-implemented
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+            - const: ref
+            - const: asic
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3568-dwc-ahci
+              - rockchip,rk3576-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata@fe210000 {
+      compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+      reg = <0xfe210000 0x1000>;
+      clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+               <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+               <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+      clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+      interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+      ports-implemented = <0x1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sata-port@0 {
+        reg = <0>;
+        hba-port-cap = <HBA_PORT_FBSCP>;
+        phys = <&combphy0_ps PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        snps,rx-ts-max = <32>;
+        snps,tx-ts-max = <32>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
index 7ac77b1c5850..58c9342b9925 100644
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -31,22 +31,27 @@ properties:
   "#size-cells":
     const: 0
 
+  dma-coherent: true
+
 patternProperties:
   "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
     description: |
       DT nodes for ports connected on the SATA host. The SATA port
       nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
     type: object
 
     properties:
       reg:
         minimum: 0
-        maximum: 14
         description:
-          The ID number of the drive port SATA can potentially use a port
-          multiplier making it possible to connect up to 15 disks to a single
-          SATA port.
-
-additionalProperties: true
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
index ce75d77e9289..48bdca0f5577 100644
--- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -51,6 +51,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8
+    items:
+      maxItems: 2
 
   calxeda,tx-atten:
     description: |
@@ -83,7 +85,7 @@ examples:
         dma-coherent;
         calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
                              <&combophy0 2>, <&combophy0 3>;
-        calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
+        calxeda,sgpio-gpio = <&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
         calxeda,led-order = <4 0 1 2 3>;
         calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
         calxeda,pre-clocks = <10>;
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..34c5bf65b02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: PHY Transmit Clock
+          const: asic
+        - description: PHY Receive Clock
+          const: rbc
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..7707cbed2260
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+select:
+  properties:
+    compatible:
+      enum:
+        - snps,dwc-ahci
+        - snps,spear-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+
+  iommus:
+    minItems: 1
+    maxItems: 3
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/st,ahci.yaml b/Documentation/devicetree/bindings/ata/st,ahci.yaml
new file mode 100644
index 000000000000..6e8e4b4f3d6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/st,ahci.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/st,ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SATA controller
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    const: st,ahci
+
+  interrupt-names:
+    items:
+      - const: hostc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ahci_clk
+
+  resets:
+    items:
+      - description: Power-down line
+      - description: Soft-reset line
+      - description: Power-reset line
+
+  reset-names:
+    items:
+      - const: pwr-dwn
+      - const: sw-rst
+      - const: pwr-rst
+
+required:
+  - compatible
+  - interrupt-names
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+
+    sata@9b20000 {
+        compatible    = "st,ahci";
+        reg           = <0x9b20000 0x1000>;
+        interrupts    = <GIC_SPI 159 IRQ_TYPE_NONE>;
+        interrupt-names = "hostc";
+        phys          = <&phy_port0 PHY_TYPE_SATA>;
+        phy-names     = "sata-phy";
+        resets        = <&powerdown STIH407_SATA0_POWERDOWN>,
+                         <&softreset STIH407_SATA0_SOFTRESET>,
+                         <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+        reset-names   = "pwr-dwn", "sw-rst", "pwr-rst";
+        clocks        = <&clk_s_c0_flexgen CLK_ICN_REG>;
+        clock-names   = "ahci_clk";
+    };
diff --git a/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml b/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml
new file mode 100644
index 000000000000..ce13c76bdffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ti,da850-ahci.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,da850-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA850 AHCI SATA Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: ti,da850-ahci
+
+  reg:
+    items:
+      - description: Address and size of the register map as defined by the AHCI 1.1 standard.
+      - description:
+          Address and size of Power Down Control Register (PWRDN) for enabling/disabling the SATA clock
+          receiver.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@218000 {
+        compatible = "ti,da850-ahci";
+        reg = <0x218000 0x2000>, <0x22c018 0x4>;
+        interrupts = <67>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml b/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml
new file mode 100644
index 000000000000..d0ff9e78afe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ti,dm816-ahci.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ti,dm816-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DM816 AHCI SATA Controller
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,dm816-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: functional clock
+      - description: external reference clock
+
+  ti,hwmods:
+    const: sata
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@4a140000 {
+        compatible = "ti,dm816-ahci";
+        reg = <0x4a140000 0x10000>;
+        interrupts = <16>;
+        clocks = <&sysclk5_ck>, <&sata_refclk>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a85..439f7b811a94 100644
--- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@ additionalProperties: false
 examples:
   - |
     lcd@10008000 {
-            compatible = "arm,versatile-lcd";
-            reg = <0x10008000 0x1000>;
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
new file mode 100644
index 000000000000..328954893c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/gpio-7-segment.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based LED segment display
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: gpio-7-segment
+
+  segment-gpios:
+    description: |
+      An array of GPIOs one per segment. The first GPIO corresponds to the A
+      segment, the seventh GPIO corresponds to the G segment. Some LED blocks
+      also have a decimal point which can be specified as an optional eighth
+      segment.
+
+               -a-
+              |   |
+              f   b
+              |   |
+               -g-
+              |   |
+              e   c
+              |   |
+               -d-  dp
+
+    minItems: 7
+    maxItems: 8
+
+required:
+  - segment-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+
+    led-7seg {
+        compatible = "gpio-7-segment";
+        segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                        <&gpio 1 GPIO_ACTIVE_LOW>,
+                        <&gpio 2 GPIO_ACTIVE_LOW>,
+                        <&gpio 3 GPIO_ACTIVE_LOW>,
+                        <&gpio 4 GPIO_ACTIVE_LOW>,
+                        <&gpio 5 GPIO_ACTIVE_LOW>,
+                        <&gpio 6 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..3ca0e9863d83 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -84,42 +84,44 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    auxdisplay {
-            compatible = "hit,hd44780";
-
-            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-                         <&hc595 1 GPIO_ACTIVE_HIGH>,
-                         <&hc595 2 GPIO_ACTIVE_HIGH>,
-                         <&hc595 3 GPIO_ACTIVE_HIGH>;
-            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-            display-height-chars = <2>;
-            display-width-chars = <16>;
+    display-controller {
+        compatible = "hit,hd44780";
+
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+        display-height-chars = <2>;
+        display-width-chars = <16>;
     };
+
   - |
     #include <dt-bindings/gpio/gpio.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            pcf8574: pcf8574@27 {
-                    compatible = "nxp,pcf8574";
-                    reg = <0x27>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcf8574: gpio-expander@27 {
+            compatible = "nxp,pcf8574";
+            reg = <0x27>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
     };
-    hd44780 {
-            compatible = "hit,hd44780";
-            display-height-chars = <2>;
-            display-width-chars  = <16>;
-            data-gpios = <&pcf8574 4 0>,
-                         <&pcf8574 5 0>,
-                         <&pcf8574 6 0>,
-                         <&pcf8574 7 0>;
-            enable-gpios = <&pcf8574 2 0>;
-            rs-gpios = <&pcf8574 0 0>;
-            rw-gpios = <&pcf8574 1 0>;
-            backlight-gpios = <&pcf8574 3 0>;
+
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
     };
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index fc4873deb76f..b90eec2077b4 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Robin van der Gracht <robin@protonic.nl>
 
 allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  - $ref: /schemas/input/matrix-keymap.yaml#
 
 properties:
   compatible:
@@ -40,6 +40,7 @@ properties:
   linux,keymap: true
 
   linux,no-autorepeat:
+    type: boolean
     description: Disable keyrepeat
 
   default-brightness-level:
@@ -72,32 +73,32 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/input/input.h>
     #include <dt-bindings/leds/common.h>
-    i2c1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ht16k33: ht16k33@70 {
-                    compatible = "holtek,ht16k33";
-                    reg = <0x70>;
-                    refresh-rate-hz = <20>;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-                    debounce-delay-ms = <50>;
-                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
-                                   <MATRIX_KEY(3, 0, KEY_F8)>,
-                                   <MATRIX_KEY(4, 0, KEY_F10)>,
-                                   <MATRIX_KEY(5, 0, KEY_F4)>,
-                                   <MATRIX_KEY(6, 0, KEY_F2)>,
-                                   <MATRIX_KEY(2, 1, KEY_F5)>,
-                                   <MATRIX_KEY(3, 1, KEY_F7)>,
-                                   <MATRIX_KEY(4, 1, KEY_F9)>,
-                                   <MATRIX_KEY(5, 1, KEY_F3)>,
-                                   <MATRIX_KEY(6, 1, KEY_F1)>;
-
-                    led {
-                            color = <LED_COLOR_ID_RED>;
-                            function = LED_FUNCTION_BACKLIGHT;
-                            linux,default-trigger = "backlight";
-                    };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
+
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
             };
-      };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7d1..55e9831b3f67 100644
--- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@ additionalProperties: false
 examples:
   - |
     lcd: lcd@17fff000 {
-            compatible = "img,boston-lcd";
-            reg = <0x17fff000 0x8>;
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
     };
diff --git a/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
new file mode 100644
index 000000000000..20dd9e8c8190
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/maxim,max6959.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX6958/6959 7-segment LED display controller
+
+maintainers:
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+description:
+  The Maxim MAX6958/6959 7-segment LED display controller provides
+  an I2C interface to up to four 7-segment LED digits. The MAX6959,
+  in comparison to MAX6958, adds input support. Type of the chip can
+  be autodetected via specific register read, and hence the features
+  may be enabled in the driver at run-time, in case they are requested
+  via Device Tree. A given hardware is simple and does not provide
+  any additional pins, such as reset or power enable.
+
+properties:
+  compatible:
+    const: maxim,max6959
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@38 {
+            compatible = "maxim,max6959";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/board/fsl,bcsr.yaml b/Documentation/devicetree/bindings/board/fsl,bcsr.yaml
new file mode 100644
index 000000000000..df3dd8399671
--- /dev/null
+++ b/Documentation/devicetree/bindings/board/fsl,bcsr.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,bcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Board Control and Status
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,mpc8360mds-bcsr
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    board@f8000000 {
+        compatible = "fsl,mpc8360mds-bcsr";
+        reg = <0xf8000000 0x8000>;
+    };
+
diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
new file mode 100644
index 000000000000..e889dac052e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,fpga-qixis-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale on-board FPGA connected on I2C bus
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,bsc9132qds-fpga
+          - const: fsl,fpga-qixis-i2c
+      - items:
+          - enum:
+              - fsl,ls1028aqds-fpga
+              - fsl,lx2160aqds-fpga
+          - const: fsl,fpga-qixis-i2c
+          - const: simple-mfd
+      - const: fsl,lx2160ardb-fpga
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          enum:
+            - fsl,lx2160ardb-fpga-gpio-sfp
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,lx2160ardb-fpga
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+    else:
+      properties:
+        "#address-cells": false
+        "#size-cells": false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        board-control@66 {
+            compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        board-control@66 {
+            compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
+                         "simple-mfd";
+            reg = <0x66>;
+
+            mux-controller {
+                compatible = "reg-mux";
+                #mux-control-cells = <1>;
+                mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */
+            };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        board-control@66 {
+            compatible = "fsl,lx2160ardb-fpga";
+            reg = <0x66>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@19 {
+                compatible = "fsl,lx2160ardb-fpga-gpio-sfp";
+                reg = <0x19>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names =
+                    "SFP2_TX_EN", "",
+                    "", "",
+                    "SFP2_RX_LOS", "SFP2_TX_FAULT",
+                    "", "SFP2_MOD_ABS";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml
new file mode 100644
index 000000000000..2eacb581b9fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/board/fsl,fpga-qixis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale on-board FPGA/CPLD
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,p1022ds-fpga
+          - const: fsl,fpga-ngpixis
+      - items:
+          - enum:
+              - fsl,ls1088aqds-fpga
+              - fsl,ls1088ardb-fpga
+              - fsl,ls2080aqds-fpga
+              - fsl,ls2080ardb-fpga
+          - const: fsl,fpga-qixis
+      - items:
+          - enum:
+              - fsl,ls1043aqds-fpga
+              - fsl,ls1043ardb-fpga
+              - fsl,ls1046aqds-fpga
+              - fsl,ls1046ardb-fpga
+              - fsl,ls208xaqds-fpga
+          - const: fsl,fpga-qixis
+          - const: simple-mfd
+      - enum:
+          - fsl,ls1043ardb-cpld
+          - fsl,ls1046ardb-cpld
+          - fsl,t1040rdb-cpld
+          - fsl,t1042rdb-cpld
+          - fsl,t1042rdb_pi-cpld
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  '^mdio-mux@[a-f0-9,]+$':
+    $ref: /schemas/net/mdio-mux-mmioreg.yaml
+
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          enum:
+            - fsl,ls1046aqds-fpga-gpio-stat-pres2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    board-control@3 {
+        compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+        reg = <3 0x30>;
+        interrupt-parent = <&mpic>;
+        interrupts = <8 IRQ_TYPE_LEVEL_LOW 0 0>;
+    };
+
+  - |
+    board-control@3 {
+        compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
+        reg = <0x3 0x10000>;
+    };
+
diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt
deleted file mode 100644
index 9cde57015921..000000000000
--- a/Documentation/devicetree/bindings/board/fsl-board.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Freescale Reference Board Bindings
-
-This document describes device tree bindings for various devices that
-exist on some Freescale reference boards.
-
-* Board Control and Status (BCSR)
-
-Required properties:
-
- - compatible : Should be "fsl,<board>-bcsr"
- - reg : Offset and length of the register set for the device
-
-Example:
-
-	bcsr@f8000000 {
-		compatible = "fsl,mpc8360mds-bcsr";
-		reg = <f8000000 8000>;
-	};
-
-* Freescale on-board FPGA
-
-This is the memory-mapped registers for on board FPGA.
-
-Required properties:
-- compatible: should be a board-specific string followed by a string
-  indicating the type of FPGA.  Example:
-	"fsl,<board>-fpga", "fsl,fpga-pixis", or
-	"fsl,<board>-fpga", "fsl,fpga-qixis"
-- reg: should contain the address and the length of the FPGA register set.
-
-Optional properties:
-- interrupts: should specify event (wakeup) IRQ.
-
-Example (P1022DS):
-
-	 board-control@3,0 {
-		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
-		 reg = <3 0 0x30>;
-		 interrupt-parent = <&mpic>;
-		 interrupts = <8 8 0 0>;
-	 };
-
-Example (LS2080A-RDB):
-
-        cpld@3,0 {
-                compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
-                reg = <0x3 0 0x10000>;
-        };
-
-* Freescale on-board FPGA connected on I2C bus
-
-Some Freescale boards like BSC9132QDS have on board FPGA connected on
-the i2c bus.
-
-Required properties:
-- compatible: Should be a board-specific string followed by a string
-  indicating the type of FPGA.  Example:
-	"fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
-- reg: Should contain the address of the FPGA
-
-Example:
-	fpga: fpga@66 {
-		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
-		reg = <0x66>;
-	};
-
-* Freescale on-board CPLD
-
-Some Freescale boards like T1040RDB have an on board CPLD connected.
-
-Required properties:
-- compatible: Should be a board-specific string like "fsl,<board>-cpld"
-  Example:
-	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
-- reg: should describe CPLD registers
-
-Example:
-	cpld@3,0 {
-		compatible = "fsl,t1040rdb-cpld";
-		reg = <3 0 0x300>;
-	};
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index 863a287ebc7e..232252e8825e 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Display Engine Bus Device Tree Bindings
+title: Allwinner A64 Display Engine Bus
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -35,14 +35,18 @@ properties:
       The SRAM that needs to be claimed to access the display engine
       bus.
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
   ranges: true
 
 patternProperties:
   # All other properties should be child nodes with unit-address and 'reg'
-  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$":
+  "@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 3d719f468a5b..cd5c2a532a92 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 RSB Device Tree Bindings
+title: Allwinner A23 RSB
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -43,8 +43,9 @@ properties:
     maximum: 20000000
 
 patternProperties:
-  "^.*@[0-9a-fA-F]+$":
+  "@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
new file mode 100644
index 000000000000..2894256c976d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Advanced High-Performance Bus Controller (AHBC)
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description: |
+  Advanced High-performance Bus Controller (AHBC) supports plenty of mechanisms
+  including a priority arbiter, an address decoder and a data multiplexer
+  to control the overall operations of Advanced High-performance Bus (AHB).
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-ahbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahbc@1e600000 {
+        compatible = "aspeed,ast2600-ahbc";
+        reg = <0x1e600000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
deleted file mode 100644
index 10f6d0a8159d..000000000000
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom GISB bus Arbiter controller
-
-Required properties:
-
-- compatible:
-    "brcm,bcm7278-gisb-arb" for V7 28nm chips
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
-    "brcm,bcm7435-gisb-arb" for newer 40nm chips
-    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
-    "brcm,bcm7038-gisb-arb" for 130nm chips
-- reg: specifies the base physical address and size of the registers
-- interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller. A third optional interrupt may be specified
-  for breakpoints.
-
-Optional properties:
-
-- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
-  masters are valid at the system level
-- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
-  masters. Should match the number of bits set in brcm,gisb-master-mask and
-  the order in which they appear
-
-Example:
-
-gisb-arb@f0400000 {
-	compatible = "brcm,gisb-arb";
-	reg = <0xf0400000 0x800>;
-	interrupts = <0>, <2>;
-	interrupt-parent = <&sun_l2_intc>;
-
-	brcm,gisb-arb-master-mask = <0x7>;
-	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
-};
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 000000000000..9017c5a3f3d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm74165-gisb-arb  # for V7 new style 16nm chips
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the literal name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml
new file mode 100644
index 000000000000..d340899ca5f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/cznic,moxtet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Turris Moxtet SPI bus
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description: >
+  Turris Mox module status and configuration bus (over SPI)
+
+  The driver finds the devices connected to the bus by itself, but it may be
+  needed to reference some of them from other parts of the device tree. In that
+  case the devices can be defined as subnodes of the moxtet node.
+
+properties:
+  compatible:
+    const: cznic,moxtet
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  spi-max-frequency: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - spi-cpol
+  - spi-cpha
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+  required:
+    - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        moxtet@1 {
+            compatible = "cznic,moxtet";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gpiosb>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+            gpio@0 {
+                compatible = "cznic,moxtet-gpio";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml
new file mode 100644
index 000000000000..993293ebc4d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8mp-aipstz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Secure AHB to IP Slave bus (AIPSTZ) bridge
+
+description:
+  The secure AIPS bridge (AIPSTZ) acts as a bridge for AHB masters issuing
+  transactions to IP Slave peripherals. Additionally, this module offers access
+  control configurations meant to restrict which peripherals a master can
+  access.
+
+maintainers:
+  - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-aipstz
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#access-controller-cells":
+    const: 3
+    description:
+      First cell - consumer ID
+      Second cell - consumer type (master or peripheral)
+      Third cell - configuration value
+
+  ranges: true
+
+# borrowed from simple-bus.yaml, no additional requirements for children
+patternProperties:
+  "@(0|[1-9a-f][0-9a-f]*)$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        items:
+          minItems: 2
+          maxItems: 4
+        minItems: 1
+        maxItems: 1024
+      ranges:
+        oneOf:
+          - items:
+              minItems: 3
+              maxItems: 7
+            minItems: 1
+            maxItems: 1024
+          - $ref: /schemas/types.yaml#/definitions/flag
+    anyOf:
+      - required:
+          - reg
+      - required:
+          - ranges
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus@30df0000 {
+        compatible = "fsl,imx8mp-aipstz";
+        reg = <0x30df0000 0x10000>;
+        ranges = <0x30c00000 0x30c00000 0x400000>;
+        power-domains = <&pgc_audio>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <3>;
+
+        dma-controller@30e00000 {
+            compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+            reg = <0x30e00000 0x10000>;
+            #dma-cells = <3>;
+            clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+                     <&clk IMX8MP_CLK_AUDIO_ROOT>;
+            clock-names = "ipg", "ahb";
+            interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
new file mode 100644
index 000000000000..6645352c7f6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
+  sitting together with the PHYs.  It is not the same as the MSI bus coming
+  from i.MX8 System Controller Unit (SCU) which is used to control power,
+  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
+
+  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
+  that is, MSI clock and AHB clock, need to be enabled so that peripherals
+  connected to the bus can be accessed. Also, the bus is part of a power
+  domain. The power domain needs to be enabled before the peripherals can
+  be accessed.
+
+  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
+  like I2C controller, PWM controller, MIPI DSI controller and Control and
+  Status Registers (CSR) module, are accessed through the bus.
+
+  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
+  pixel link MSI bus controller and does not allow SCFW user to control it.
+  So, the controller's registers cannot be accessed by SCFW user. Hence,
+  the interrupts generated by the controller don't make any sense from SCFW
+  user's point of view.
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'simple-pm-bus'.
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+      - const: simple-pm-bus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master gated clock from system
+      - description: AHB clock
+
+  clock-names:
+    items:
+      - const: msi
+      - const: ahb
+
+patternProperties:
+  "@[0-9a-f]+$":
+    description: Devices attached to the bus
+    type: object
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    bus@56200000 {
+        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
+        reg = <0x56200000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&dc0_irqsteer>;
+        interrupts = <320>;
+        ranges;
+        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
+                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "msi", "ahb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        bus@56221000 {
+            compatible = "simple-pm-bus", "syscon";
+            reg = <0x56221000 0x1000>;
+            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+            clock-names = "ipg";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            pxl2dpi {
+                compatible = "fsl,imx8qxp-pxl2dpi";
+                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+                power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0>;
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+
+                    port@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <1>;
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+                };
+            };
+
+            ldb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx8qxp-ldb";
+                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+                clock-names = "pixel", "bypass";
+                power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+                channel@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+
+                channel@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+            };
+        };
+
+        clock-controller@56223004 {
+            compatible = "fsl,imx8qxp-lpcg";
+            reg = <0x56223004 0x4>;
+            #clock-cells = <1>;
+            clocks = <&mipi_lvds_0_ipg_clk>;
+            clock-indices = <IMX_LPCG_CLK_4>;
+            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+
+        phy@56228300 {
+            compatible = "fsl,imx8qxp-mipi-dphy";
+            reg = <0x56228300 0x100>;
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+            clock-names = "phy_ref";
+            #phy-cells = <0>;
+            fsl,syscon = <&mipi_lvds_0_csr>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 000000000000..d42dbb0bbc2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  A simple bus enabling access to shared peripherals.
+
+  The "spba-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification.  It is an extension of
+  "simple-bus" because the SDMA controller uses this compatible flag to
+  determine which peripherals are available to it and the range over which
+  the SDMA can access.  There are no special clocks for the bus, because
+  the SDMA controller itself has its interrupt and clock assignments.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,spba-bus
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^spba-bus(@[0-9a-f]+)?$"
+
+  compatible:
+    items:
+      - const: fsl,spba-bus
+      - const: simple-bus
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    spba-bus@30000000 {
+        compatible = "fsl,spba-bus", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x30000000 0x100000>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
deleted file mode 100644
index 1b1d1c5c21ea..000000000000
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Device tree bindings for i.MX Wireless External Interface Module (WEIM)
-
-The term "wireless" does not imply that the WEIM is literally an interface
-without wires. It simply means that this module was originally designed for
-wireless and mobile applications that use low-power technology.
-
-The actual devices are instantiated from the child nodes of a WEIM node.
-
-Required properties:
-
- - compatible:		Should contain one of the following:
-			  "fsl,imx1-weim"
-			  "fsl,imx27-weim"
-			  "fsl,imx51-weim"
-			  "fsl,imx50-weim"
-			  "fsl,imx6q-weim"
- - reg:			A resource specifier for the register space
-			(see the example below)
- - clocks:		the clock, see the example below.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-Optional properties:
-
- - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, it should be the phandle to the system General
-			Purpose Register controller that contains WEIM CS GPR
-			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
-			should be set up as one of the following 4 possible
-			values depending on the CS space configuration.
-
-			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
-			---------------------------------------------
-				05	    128M     0M     0M     0M
-				033          64M    64M     0M     0M
-				0113         64M    32M    32M     0M
-				01111        32M    32M    32M    32M
-
-			In case that the property is absent, the reset value or
-			what bootloader sets up in IOMUXC_GPR1[11:0] will be
-			used.
-
- - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, the presence of this property indicates that
-			the weim bus should operate in Burst Clock Mode.
-
-Timing property for child nodes. It is mandatory, not optional.
-
- - fsl,weim-cs-timing:	The timing array, contains timing values for the
-			child node. We get the CS indexes from the address
-			ranges in the child node's "reg" property.
-			The number of registers depends on the selected chip:
-			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
-			registers: CSxU, CSxL.
-			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
-			there are three registers: CSCRxU, CSCRxL, CSCRxA.
-			For i.MX50, i.MX53 ("fsl,imx50-weim"),
-			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
-			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
-			CSxRCR2, CSxWCR1, CSxWCR2.
-
-Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x08000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		nor@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-					0x0000c000 0x1404a38e 0x00000000>;
-		};
-	};
-
-Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
-
-In this case, both chip select 0 and 1 will be configured with the same timing
-array values.
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x02000000
-			  1 0 0x0a000000 0x02000000
-			  2 0 0x0c000000 0x02000000
-			  3 0 0x0e000000 0x02000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		acme@0 {
-			compatible = "acme,whatever";
-			reg = <0 0 0x100>, <0 0x400000 0x800>,
-				<1 0x400000 0x800>;
-			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
-				0x00000000 0xa0000240 0x00000000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
deleted file mode 100644
index 5fb4e7bfa4da..000000000000
--- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+++ /dev/null
@@ -1,168 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel IXP4xx Expansion Bus Controller
-
-description: |
-  The IXP4xx expansion bus controller handles access to devices on the
-  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
-  including IXP42x, IXP43x, IXP45x and IXP46x.
-
-maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
-
-properties:
-  $nodename:
-    pattern: '^bus@[0-9a-f]+$'
-
-  compatible:
-    items:
-      - enum:
-          - intel,ixp42x-expansion-bus-controller
-          - intel,ixp43x-expansion-bus-controller
-          - intel,ixp45x-expansion-bus-controller
-          - intel,ixp46x-expansion-bus-controller
-      - const: syscon
-
-  reg:
-    description: Control registers for the expansion bus, these are not
-      inside the memory range handled by the expansion bus.
-    maxItems: 1
-
-  native-endian:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
-      the access pattern for words (swizzling) on the bus depending on whether
-      the SoC is running in big-endian or little-endian mode. Thus the
-      registers must always be accessed using native endianness.
-
-  "#address-cells":
-    description: |
-      The first cell is the chip select number.
-      The second cell is the address offset within the bank.
-    const: 2
-
-  "#size-cells":
-    const: 1
-
-  ranges: true
-  dma-ranges: true
-
-patternProperties:
-  "^.*@[0-7],[0-9a-f]+$":
-    description: Devices attached to chip selects are represented as
-      subnodes.
-    type: object
-
-    properties:
-      intel,ixp4xx-eb-t1:
-        description: Address timing, extend address phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t2:
-        description: Setup chip select timing, extend setup phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t3:
-        description: Strobe timing, extend strobe phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-t4:
-        description: Hold timing, extend hold phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t5:
-        description: Recovery timing, extend recovery phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-cycle-type:
-        description: The type of cycles to use on the expansion bus for this
-          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2]
-
-      intel,ixp4xx-eb-byte-access-on-halfword:
-        description: Allow byte read access on half word devices.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-hpi-hrdy-pol-high:
-        description: Set HPI HRDY polarity to active high when using HPI.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-mux-address-and-data:
-        description: Multiplex address and data on the data bus.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-ahb-split-transfers:
-        description: Enable AHB split transfers.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-write-enable:
-        description: Enable write cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-byte-access:
-        description: Expansion bus uses only 8 bits. The default is to use
-          16 bits.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-required:
-  - compatible
-  - reg
-  - native-endian
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - dma-ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    bus@50000000 {
-        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-        reg = <0xc4000000 0x28>;
-        native-endian;
-        #address-cells = <2>;
-        #size-cells = <1>;
-        ranges = <0 0x0 0x50000000 0x01000000>,
-                 <1 0x0 0x51000000 0x01000000>;
-        dma-ranges = <0 0x0 0x50000000 0x01000000>,
-                     <1 0x0 0x51000000 0x01000000>;
-        flash@0,0 {
-            compatible = "intel,ixp4xx-flash", "cfi-flash";
-            bank-width = <2>;
-            reg = <0 0x00000000 0x1000000>;
-            intel,ixp4xx-eb-t3 = <3>;
-            intel,ixp4xx-eb-cycle-type = <0>;
-            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
-            intel,ixp4xx-eb-write-enable = <1>;
-            intel,ixp4xx-eb-byte-access = <0>;
-        };
-        serial@1,0 {
-            compatible = "exar,xr16l2551", "ns8250";
-            reg = <1 0x00000000 0x10>;
-            interrupt-parent = <&gpio0>;
-            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-            clock-frequency = <1843200>;
-            intel,ixp4xx-eb-t3 = <3>;
-            intel,ixp4xx-eb-cycle-type = <1>;
-            intel,ixp4xx-eb-write-enable = <1>;
-            intel,ixp4xx-eb-byte-access = <1>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
new file mode 100644
index 000000000000..0bea4f5287ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/microsoft,vmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft Hyper-V VMBus
+
+maintainers:
+  - Saurabh Sengar <ssengar@linux.microsoft.com>
+
+description:
+  VMBus is a software bus that implements the protocols for communication
+  between the root or host OS and guest OS'es (virtual machines).
+
+properties:
+  compatible:
+    const: microsoft,vmbus
+
+  ranges: true
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt is used to report a message from the host.
+
+required:
+  - compatible
+  - ranges
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        bus {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            ranges;
+
+            vmbus@ff0000000 {
+                compatible = "microsoft,vmbus";
+                #address-cells = <2>;
+                #size-cells = <1>;
+                ranges = <0x0f 0xf0000000 0x0f 0xf0000000 0x10000000>;
+                dma-coherent;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_PPI 2 IRQ_TYPE_EDGE_RISING>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt
deleted file mode 100644
index fb50fc865336..000000000000
--- a/Documentation/devicetree/bindings/bus/moxtet.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Turris Mox module status and configuration bus (over SPI)
-
-Required properties:
- - compatible		: Should be "cznic,moxtet"
- - #address-cells	: Has to be 1
- - #size-cells		: Has to be 0
- - spi-cpol		: Required inverted clock polarity
- - spi-cpha		: Required shifted clock phase
- - interrupts		: Must contain reference to the shared interrupt line
- - interrupt-controller	: Required
- - #interrupt-cells	: Has to be 1
-
-For other required and optional properties of SPI slave nodes please refer to
-../spi/spi-bus.txt.
-
-Required properties of subnodes:
- - reg			: Should be position on the Moxtet bus (how many Moxtet
-			  modules are between this module and CPU module, so
-			  either 0 or a positive integer)
-
-The driver finds the devices connected to the bus by itself, but it may be
-needed to reference some of them from other parts of the device tree. In that
-case the devices can be defined as subnodes of the moxtet node.
-
-Example:
-
-	moxtet@1 {
-		compatible = "cznic,moxtet";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		spi-max-frequency = <10000000>;
-		spi-cpol;
-		spi-cpha;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gpiosb>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-
-		moxtet_sfp: gpio@0 {
-			compatible = "cznic,moxtet-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-		}
-	};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
index 7b1a08c62aef..81a65e9f93f1 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -7,10 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NVIDIA Tegra ACONNECT Bus
 
 description: |
-  The Tegra ACONNECT bus is an AXI switch which is used to connnect various
+  The Tegra ACONNECT bus is an AXI switch which is used to connect various
   components inside the Audio Processing Engine (APE). All CPU accesses to
   the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All
-  devices accessed via the ACONNNECT are described by child-nodes.
+  devices accessed via the ACONNECT are described by child-nodes.
 
 maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
@@ -21,6 +21,8 @@ properties:
       - const: nvidia,tegra210-aconnect
       - items:
           - enum:
+              - nvidia,tegra264-aconnect
+              - nvidia,tegra234-aconnect
               - nvidia,tegra186-aconnect
               - nvidia,tegra194-aconnect
           - const: nvidia,tegra210-aconnect
@@ -39,10 +41,10 @@ properties:
     maxItems: 1
 
   "#address-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   ranges: true
 
diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml
index f5cbfaf52d53..c36c1e92a573 100644
--- a/Documentation/devicetree/bindings/bus/palmbus.yaml
+++ b/Documentation/devicetree/bindings/bus/palmbus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/palmbus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ralink PalmBus Device Tree Bindings
+title: Ralink PalmBus
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
@@ -36,6 +36,7 @@ patternProperties:
   # All other properties should be child nodes with unit-address and 'reg'
   "@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
deleted file mode 100644
index 5058aa2c63b2..000000000000
--- a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Qualcomm External Bus Interface 2 (EBI2)
-
-The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
-external memory (such as NAND or other memory-mapped peripherals) whereas
-LCDC handles LCD displays.
-
-As it says it connects devices to an external bus interface, meaning address
-lines (up to 9 address lines so can only address 1KiB external memory space),
-data lines (16 bits), OE (output enable), ADV (address valid, used on some
-NOR flash memories), WE (write enable). This on top of 6 different chip selects
-(CS0 thru CS5) so that in theory 6 different devices can be connected.
-
-Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
-and the bus can only come out on these pins, however if some of the pins are
-unused they can be left unconnected or remuxed to be used as GPIO or in some
-cases other orthogonal functions as well.
-
-Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
-
-The chip selects have the following memory range assignments. This region of
-memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
-
-Chip Select                     Physical address base
-CS0 GPIO134                     0x1a800000-0x1b000000 (8MB)
-CS1 GPIO39 (A) / GPIO123 (B)    0x1b000000-0x1b800000 (8MB)
-CS2 GPIO40 (A) / GPIO124 (B)    0x1b800000-0x1c000000 (8MB)
-CS3 GPIO133                     0x1d000000-0x25000000 (128 MB)
-CS4 GPIO132                     0x1c800000-0x1d000000 (8MB)
-CS5 GPIO131                     0x1c000000-0x1c800000 (8MB)
-
-The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
-August 6, 2012 contains some incomplete documentation of the EBI2.
-
-FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
-We have not been able to figure out which bit fields these correspond to
-in the hardware, or what valid values exist. The current hypothesis is that
-this is something just used on the FAST chip selects and that the SLOW
-chip selects are understood fully. There is also a "byte device enable"
-flag somewhere for 8bit memories.
-
-FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
-unclear what this means, if they are mutually exclusive or can be used
-together, or if some chip selects are hardwired to be FAST and others are SLOW
-by design.
-
-The XMEM registers are totally undocumented but could be partially decoded
-because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
-similar register layout, see: http://www.cypress.com/file/105771/download
-
-Required properties:
-- compatible: should be one of:
-  "qcom,msm8660-ebi2"
-  "qcom,apq8060-ebi2"
-- #address-cells: should be <2>: the first cell is the chipselect,
-  the second cell is the offset inside the memory range
-- #size-cells: should be <1>
-- ranges: should be set to:
-  ranges = <0 0x0 0x1a800000 0x00800000>,
-           <1 0x0 0x1b000000 0x00800000>,
-           <2 0x0 0x1b800000 0x00800000>,
-           <3 0x0 0x1d000000 0x08000000>,
-           <4 0x0 0x1c800000 0x00800000>,
-           <5 0x0 0x1c000000 0x00800000>;
-- reg: two ranges of registers: EBI2 config and XMEM config areas
-- reg-names: should be "ebi2", "xmem"
-- clocks: two clocks, EBI_2X and EBI
-- clock-names: should be "ebi2x", "ebi2"
-
-Optional subnodes:
-- Nodes inside the EBI2 will be considered device nodes.
-
-The following optional properties are properties that can be tagged onto
-any device subnode. We are assuming that there can be only ONE device per
-chipselect subnode, else the properties will become ambiguous.
-
-Optional properties arrays for SLOW chip selects:
-- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to
-  drive the data bus after OE is de-asserted, in order to avoid contention on
-  the data bus. They are inserted when reading one CS and switching to another
-  CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum
-  value is actually 1, so a value of 0 will still yield 1 recovery cycle.
-- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles
-  inserted after every write minimum 1. The data out is driven from the time
-  WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS
-  stays active for 1 extra cycle etc. Valid values 0 thru 15.
-- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for
-  the first write to a page or burst memory. Valid values 0 thru 255.
-- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the
-  first read to a page or burst memory. Valid values 0 thru 255.
-- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1
-  cycle. Valid values 0 thru 15.
-- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1
-  cycle. Valid values 0 thru 15.
-
-Optional properties arrays for FAST chip selects:
-- qcom,xmem-address-hold-enable: this is a boolean property stating that we
-  shall hold the address for an extra cycle to meet hold time requirements
-  with ADV assertion.
-- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE
-  assertion, with respect to the cycle where ADV (address valid) is asserted.
-  2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
-- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
-  read transfer. For a single read transfer this will be the time from CS
-  assertion to OE assertion. Valid values 0 thru 15.
-
-
-Example:
-
-ebi2@1a100000 {
-	compatible = "qcom,apq8060-ebi2";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0x0 0x1a800000 0x00800000>,
-		 <1 0x0 0x1b000000 0x00800000>,
-		 <2 0x0 0x1b800000 0x00800000>,
-		 <3 0x0 0x1d000000 0x08000000>,
-		 <4 0x0 0x1c800000 0x00800000>,
-		 <5 0x0 0x1c000000 0x00800000>;
-	reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
-	reg-names = "ebi2", "xmem";
-	clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
-	clock-names = "ebi2x", "ebi2";
-	/* Make sure to set up the pin control for the EBI2 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&foo_ebi2_pins>;
-
-	foo-ebi2@2,0 {
-		compatible = "foo";
-		reg = <2 0x0 0x100>;
-		(...)
-		qcom,xmem-recovery-cycles = <0>;
-		qcom,xmem-write-hold-cycles = <3>;
-		qcom,xmem-write-delta-cycles = <31>;
-		qcom,xmem-read-delta-cycles = <28>;
-		qcom,xmem-write-wait-cycles = <9>;
-		qcom,xmem-read-wait-cycles = <9>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
new file mode 100644
index 000000000000..693cfa9696b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Single-wire Serial Bus Interface (SSBI)
+
+description:
+  Some Qualcomm MSM devices contain a point-to-point serial bus used to
+  communicate with a limited range of devices (mostly power management
+  chips).
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,ssbi
+
+  reg:
+    maxItems: 1
+
+  qcom,controller-type:
+    description:
+      Indicates the SSBI bus variant the controller should use to talk
+      with the slave device. The type chosen is determined by the attached
+      slave.
+    enum:
+      - ssbi
+      - ssbi2
+      - pmic-arbiter
+
+  pmic:
+    $ref: /schemas/mfd/qcom-pm8xxx.yaml#
+
+required:
+  - compatible
+  - reg
+  - qcom,controller-type
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi@c00000 {
+        compatible = "qcom,ssbi";
+        reg = <0x00c00000 0x1000>;
+        qcom,controller-type = "pmic-arbiter";
+
+        pmic {
+            compatible = "qcom,pm8821";
+            interrupt-parent = <&msmgpio>;
+            interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 000000000000..8e9e6ff35d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
index f53a37785413..ff3c78317d28 100644
--- a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
+++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
@@ -41,6 +41,18 @@ properties:
   interrupts:
     maxItems: 1
 
+patternProperties:
+  # All other properties should be child nodes with unit-address and 'reg'
+  "@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
 required:
   - reg
 
diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml
new file mode 100644
index 000000000000..bf0af3424c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Extended TrustZone protection controller
+
+description: |
+  The ETZPC configures TrustZone security in a SoC having bus masters and
+  devices with programmable-security attributes (securable resources).
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: st,stm32-etzpc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: st,stm32-etzpc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its access
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+
+    etzpc: bus@5c007000 {
+        compatible = "st,stm32-etzpc", "simple-bus";
+        reg = <0x5c007000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@4c001000 {
+            compatible = "st,stm32h7-uart";
+            reg = <0x4c001000 0x400>;
+            interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rcc USART2_K>;
+            resets = <&rcc USART2_R>;
+            wakeup-source;
+            dmas = <&dmamux1 43 0x400 0x5>,
+                    <&dmamux1 44 0x400 0x1>;
+            dma-names = "rx", "tx";
+            access-controllers = <&etzpc 17>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
new file mode 100644
index 000000000000..4d19917ad2c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+description: |
+  Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+  designed to enforce and manage isolation of STM32 hardware resources like
+  memory and peripherals.
+
+  The RIFSC (RIF security controller) is composed of three sets of registers,
+  each managing a specific set of hardware resources:
+    - RISC registers associated with RISUP logic (resource isolation device unit
+      for peripherals), assign all non-RIF aware peripherals to zero, one or
+      any security domains (secure, privilege, compartment).
+    - RIMC registers: associated with RIMU logic (resource isolation master
+      unit), assign all non RIF-aware bus master to one security domain by
+      setting secure, privileged and compartment information on the system bus.
+      Alternatively, the RISUP logic controlling the device port access to a
+      peripheral can assign target bus attributes to this peripheral master port
+      (supported attribute: CID).
+    - RISC registers associated with RISAL logic (resource isolation device unit
+      for address space - Lite version), assign address space subregions to one
+      security domains (secure, privilege, compartment).
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp21-rifsc
+          - st,stm32mp25-rifsc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - st,stm32mp21-rifsc
+          - st,stm32mp25-rifsc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its domain
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rifsc: bus@42080000 {
+        compatible = "st,stm32mp25-rifsc", "simple-bus";
+        reg = <0x42080000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@400e0000 {
+              compatible = "st,stm32h7-uart";
+              reg = <0x400e0000 0x400>;
+              interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&ck_flexgen_08>;
+              access-controllers = <&rifsc 32>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
index bd40213302da..6d7bca6c138e 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments interconnect target module binding
+title: Texas Instruments interconnect target module
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -35,7 +35,6 @@ properties:
       - items:
           - enum:
               - ti,sysc-omap2
-              - ti,sysc-omap2
               - ti,sysc-omap4
               - ti,sysc-omap4-simple
               - ti,sysc-omap2-timer
@@ -98,7 +97,7 @@ properties:
       - enum: [ ick, fck, sys_clk ]
       - items:
           - const: fck
-          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+          - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
       - items:
           - const: fck
           - const: phy-clk
diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
new file mode 100644
index 000000000000..7f62ffbdc245
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD CDX bus controller
+
+description: |
+  CDX bus controller for AMD devices is implemented to dynamically
+  detect CDX bus and devices using the firmware.
+  The CDX bus manages multiple FPGA based hardware devices, which
+  can support network, crypto or any other specialized type of
+  devices. These FPGA based devices can be added/modified dynamically
+  on run-time.
+
+  All devices on the CDX bus will have a unique streamid (for IOMMU)
+  and a unique device ID (for MSI) corresponding to a requestor ID
+  (one to one associated with the device). The streamid and deviceid
+  are used to configure SMMU and GIC-ITS respectively.
+
+  iommu-map property is used to define the set of stream ids
+  corresponding to each device and the associated IOMMU.
+
+  The MSI writes are accompanied by sideband data (Device ID).
+  The msi-map property is used to associate the devices with the
+  device ID as well as the associated ITS controller.
+
+  rproc property (xlnx,rproc) is used to identify the remote processor
+  with which APU (Application Processor Unit) interacts to find out
+  the bus and device configuration.
+
+maintainers:
+  - Nipun Gupta <nipun.gupta@amd.com>
+  - Nikhil Agarwal <nikhil.agarwal@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,versal-net-cdx
+
+  iommu-map: true
+
+  msi-map: true
+
+  xlnx,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the remoteproc_r5 rproc node using which APU interacts
+      with remote processor.
+
+  ranges: true
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+required:
+  - compatible
+  - iommu-map
+  - msi-map
+  - xlnx,rproc
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cdx {
+        compatible = "xlnx,versal-net-cdx";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        /* define map for RIDs 250-259 */
+        iommu-map = <250 &smmu 250 10>;
+        /* define msi map for RIDs 250-259 */
+        msi-map = <250 &its 250 10>;
+        xlnx,rproc = <&remoteproc_r5>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
new file mode 100644
index 000000000000..b135ffa4ab6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/andestech,ax45mp-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andestech AX45MP L2 Cache Controller
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  A level-2 cache (L2C) is used to improve the system performance by providing
+  a large amount of cache line entries and reasonable access delays. The L2C
+  is shared between cores, and a non-inclusive non-exclusive policy is used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - andestech,ax45mp-cache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - andestech,qilai-ax45mp-cache
+          - renesas,r9a07g043f-ax45mp-cache
+      - const: andestech,ax45mp-cache
+      - const: cache
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cache-line-size:
+    const: 64
+
+  cache-level:
+    const: 2
+
+  cache-sets:
+    enum: [1024, 2048]
+
+  cache-size:
+    enum: [131072, 262144, 524288, 1048576, 2097152]
+
+  cache-unified: true
+
+  next-level-cache: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-line-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: andestech,qilai-ax45mp-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+        cache-size:
+          const: 2097152
+    else:
+      properties:
+        cache-sets:
+          const: 1024
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cache-controller@13400000 {
+        compatible = "renesas,r9a07g043f-ax45mp-cache", "andestech,ax45mp-cache",
+                     "cache";
+        reg = <0x13400000 0x100000>;
+        interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
+        cache-line-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <262144>;
+        cache-unified;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
index 1fca282f64a2..ec4f367bc0b4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
+++ b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml#
+$id: http://devicetree.org/schemas/cache/baikal,bt1-l2-ctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Baikal-T1 L2-cache Control Block
diff --git a/Documentation/devicetree/bindings/cache/freescale-l2cache.txt b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
new file mode 100644
index 000000000000..22ad012660e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
@@ -0,0 +1,55 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are Devicetree Specification compliant
+
+Required Properties:
+
+- compatible	: Should include one of the following:
+		  "fsl,b4420-l2-cache-controller"
+		  "fsl,b4860-l2-cache-controller"
+		  "fsl,bsc9131-l2-cache-controller"
+		  "fsl,bsc9132-l2-cache-controller"
+		  "fsl,c293-l2-cache-controller"
+		  "fsl,mpc8536-l2-cache-controller"
+		  "fsl,mpc8540-l2-cache-controller"
+		  "fsl,mpc8541-l2-cache-controller"
+		  "fsl,mpc8544-l2-cache-controller"
+		  "fsl,mpc8548-l2-cache-controller"
+		  "fsl,mpc8555-l2-cache-controller"
+		  "fsl,mpc8560-l2-cache-controller"
+		  "fsl,mpc8568-l2-cache-controller"
+		  "fsl,mpc8569-l2-cache-controller"
+		  "fsl,mpc8572-l2-cache-controller"
+		  "fsl,p1010-l2-cache-controller"
+		  "fsl,p1011-l2-cache-controller"
+		  "fsl,p1012-l2-cache-controller"
+		  "fsl,p1013-l2-cache-controller"
+		  "fsl,p1014-l2-cache-controller"
+		  "fsl,p1015-l2-cache-controller"
+		  "fsl,p1016-l2-cache-controller"
+		  "fsl,p1020-l2-cache-controller"
+		  "fsl,p1021-l2-cache-controller"
+		  "fsl,p1022-l2-cache-controller"
+		  "fsl,p1023-l2-cache-controller"
+		  "fsl,p1024-l2-cache-controller"
+		  "fsl,p1025-l2-cache-controller"
+		  "fsl,p2010-l2-cache-controller"
+		  "fsl,p2020-l2-cache-controller"
+		  "fsl,t2080-l2-cache-controller"
+		  "fsl,t4240-l2-cache-controller"
+		  and "cache".
+- reg		: Address and size of L2 cache controller registers
+- cache-size	: Size of the entire L2 cache
+- interrupts	: Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>; // 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
index 6b8f4d4fa580..10c1a900202f 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ARM L2 Cache Controller
@@ -100,9 +100,8 @@ properties:
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 2
-      maxItems: 2
+    minItems: 2
+    maxItems: 2
 
   arm,io-coherent:
     description: indicates that the system is operating in an hardware
diff --git a/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml b/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
new file mode 100644
index 000000000000..2bfa3c29f6a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,kirkwood-cache.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,kirkwood-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Feroceon/Kirkwood Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - marvell,feroceon-cache
+      - marvell,kirkwood-cache
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,kirkwood-cache
+    then:
+      required:
+        - reg
+    else:
+      properties:
+        reg: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache@20128 {
+        compatible = "marvell,kirkwood-cache";
+        reg = <0x20128 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
new file mode 100644
index 000000000000..9f7f0d031631
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/marvell,tauros2-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Tauros2 Cache
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,tauros2-cache
+
+  marvell,tauros2-cache-features:
+    description: >
+      Specify the features supported for the tauros2 cache. The features include:
+
+        - CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+        - CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+
+      The definition can be found at arch/arm/include/asm/hardware/cache-tauros2.h
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x3
+
+required:
+  - compatible
+  - marvell,tauros2-cache-features
+
+additionalProperties: false
+
+examples:
+  - |
+    l2-cache {
+        compatible = "marvell,tauros2-cache";
+        marvell,tauros2-cache-features = <0x3>;
+    };
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
new file mode 100644
index 000000000000..a620a2ff5c56
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/qcom,llcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Last Level Cache Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
+  that can be shared by multiple clients. Clients here are different cores in the
+  SoC, the idea is to minimize the local caches at the clients and migrate to
+  common pool of memory. Cache memory is divided into partitions called slices
+  which are assigned to clients. Clients can query the slice details, activate
+  and deactivate them.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5424-llcc
+      - qcom,kaanapali-llcc
+      - qcom,qcs615-llcc
+      - qcom,qcs8300-llcc
+      - qcom,qdu1000-llcc
+      - qcom,sa8775p-llcc
+      - qcom,sar1130p-llcc
+      - qcom,sar2130p-llcc
+      - qcom,sc7180-llcc
+      - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
+      - qcom,sdm845-llcc
+      - qcom,sm6350-llcc
+      - qcom,sm7150-llcc
+      - qcom,sm8150-llcc
+      - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
+      - qcom,sm8550-llcc
+      - qcom,sm8650-llcc
+      - qcom,sm8750-llcc
+      - qcom,x1e80100-llcc
+
+  reg:
+    minItems: 1
+    maxItems: 10
+
+  reg-names:
+    minItems: 1
+    maxItems: 10
+
+  interrupts:
+    maxItems: 1
+
+  nvmem-cells:
+    items:
+      - description: Reference to an nvmem node for multi channel DDR
+
+  nvmem-cell-names:
+    items:
+      - const: multi-chan-ddr
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5424-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar1130p-llcc
+              - qcom,sar2130p-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC broadcast OR register region
+            - description: LLCC broadcast AND register region
+            - description: LLCC scratchpad broadcast OR register region
+            - description: LLCC scratchpad broadcast AND register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
+            - const: llcc_scratchpad_broadcast_base
+            - const: llcc_scratchpad_broadcast_and_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs615-llcc
+              - qcom,sc7180-llcc
+              - qcom,sm6350-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-llcc
+              - qcom,sc8180x-llcc
+              - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-llcc
+              - qcom,sdm845-llcc
+              - qcom,sm8150-llcc
+              - qcom,sm8250-llcc
+              - qcom,sm8350-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-llcc
+              - qcom,sm8450-llcc
+              - qcom,sm8550-llcc
+              - qcom,sm8650-llcc
+              - qcom,sm8750-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC broadcast OR register region
+            - description: LLCC broadcast AND register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-cache-controller@1100000 {
+            compatible = "qcom,sdm845-llcc";
+            reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
+                <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+                <0 0x01300000 0 0x50000>;
+            reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+                "llcc3_base", "llcc_broadcast_base";
+            interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
new file mode 100644
index 000000000000..c0e5ebb1fa4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/sifive,ccache0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Composable Cache Controller
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  The SiFive Composable Cache Controller is used to provide access to fast copies
+  of memory for masters in a Core Complex. The Composable Cache Controller also
+  acts as directory-based coherency manager.
+  All the properties in ePAPR/DeviceTree specification applies for this platform.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,ccache0
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,ccache0
+              - sifive,fu540-c000-ccache
+              - sifive,fu740-c000-ccache
+          - const: cache
+      - items:
+          - enum:
+              - eswin,eic7700-l3-cache
+              - starfive,jh7100-ccache
+              - starfive,jh7110-ccache
+          - const: sifive,ccache0
+          - const: cache
+      - items:
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
+      - items:
+          - const: microchip,pic64gx-ccache
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
+
+  cache-block-size:
+    const: 64
+
+  cache-level:
+    enum: [2, 3]
+
+  cache-sets:
+    enum: [1024, 2048, 4096]
+
+  cache-size:
+    enum: [2097152, 4194304]
+
+  cache-unified: true
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
+
+  reg:
+    maxItems: 1
+
+  next-level-cache: true
+
+  memory-region:
+    maxItems: 1
+    description: |
+      The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
+      The reserved memory node should be defined as per the bindings in reserved-memory.txt.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - eswin,eic7700-l3-cache
+              - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
+              - starfive,jh7110-ccache
+              - microchip,mpfs-ccache
+
+    then:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError, DataFail, DirFail signals.
+          minItems: 4
+
+    else:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError and DataFail signals.
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-size:
+          const: 4194304
+
+    else:
+      properties:
+        cache-size:
+          const: 2097152
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - starfive,jh7100-ccache
+              - starfive,jh7110-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mpfs-ccache
+              - sifive,fu540-c000-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - eswin,eic7700-l3-cache
+
+    then:
+      properties:
+        cache-sets:
+          const: 4096
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,ccache0
+
+    then:
+      properties:
+        cache-level:
+          enum: [2, 3]
+
+    else:
+      properties:
+        cache-level:
+          const: 2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+  - interrupts
+  - reg
+
+examples:
+  - |
+    cache-controller@2010000 {
+        compatible = "sifive,fu540-c000-ccache", "cache";
+        cache-block-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <2097152>;
+        cache-unified;
+        reg = <0x2010000 0x1000>;
+        interrupt-parent = <&plic0>;
+        interrupts = <1>,
+                     <2>,
+                     <3>;
+        next-level-cache = <&L25>;
+        memory-region = <&l2_lim>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
index 7ca5375f278f..3196263685a3 100644
--- a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
+++ b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml#
+$id: http://devicetree.org/schemas/cache/socionext,uniphier-system-cache.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: UniPhier outer cache controller
@@ -22,7 +22,6 @@ properties:
     description: |
       should contain 3 regions: control register, revision register,
       operation register, in this order.
-    minItems: 3
     maxItems: 3
 
   interrupts:
diff --git a/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml b/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml
new file mode 100644
index 000000000000..6d61098e388b
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/starfive,jh8100-starlink-cache.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/starfive,jh8100-starlink-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive StarLink Cache Controller
+
+maintainers:
+  - Joshua Yeong <joshua.yeong@starfivetech.com>
+
+description:
+  StarFive's StarLink Cache Controller manages the L3 cache shared between
+  clusters of CPU cores. The cache driver enables RISC-V non-standard cache
+  management as an alternative to instructions in the RISC-V Zicbom extension.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'cache'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh8100-starlink-cache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: starfive,jh8100-starlink-cache
+      - const: cache
+
+  reg:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+
+examples:
+  - |
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cache-controller@15000000 {
+          compatible = "starfive,jh8100-starlink-cache", "cache";
+          reg = <0x0 0x15000000 0x0 0x278>;
+          cache-block-size = <64>;
+          cache-level = <3>;
+          cache-sets = <8192>;
+          cache-size = <0x400000>;
+          cache-unified;
+        };
+      };
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
deleted file mode 100644
index 1cc3aa10dcb1..000000000000
--- a/Documentation/devicetree/bindings/chosen.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-The chosen node
----------------
-
-The chosen node does not represent a real device, but serves as a place
-for passing data between firmware and the operating system, like boot
-arguments. Data in the chosen node does not represent the hardware.
-
-The following properties are recognized:
-
-
-kaslr-seed
------------
-
-This property is used when booting with CONFIG_RANDOMIZE_BASE as the
-entropy used to randomize the kernel image base address location. Since
-it is used directly, this value is intended only for KASLR, and should
-not be used for other purposes (as it may leak information about KASLR
-offsets). It is parsed as a u64 value, e.g.
-
-/ {
-	chosen {
-		kaslr-seed = <0xfeedbeef 0xc0def00d>;
-	};
-};
-
-Note that if this property is set from UEFI (or a bootloader in EFI
-mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
-the Linux EFI stub (which will populate the property itself, using
-EFI_RNG_PROTOCOL).
-
-stdout-path
------------
-
-Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in the Devicetree
-Specification, e.g.
-
-/ {
-	chosen {
-		stdout-path = "/serial@f00:115200";
-	};
-
-	serial@f00 {
-		compatible = "vendor,some-uart";
-		reg = <0xf00 0x10>;
-	};
-};
-
-If the character ":" is present in the value, this terminates the path.
-The meaning of any characters following the ":" is device-specific, and
-must be specified in the relevant binding documentation.
-
-For UART devices, the preferred binding is a string in the form:
-
-	<baud>{<parity>{<bits>{<flow>}}}
-
-where
-
-	baud	- baud rate in decimal
-	parity	- 'n' (none), 'o', (odd) or 'e' (even)
-	bits	- number of data bits
-	flow	- 'r' (rts)
-
-For example: 115200n8r
-
-Implementation note: Linux will look for the property "linux,stdout-path" or
-on PowerPC "stdout" if "stdout-path" is not found.  However, the
-"linux,stdout-path" and "stdout" properties are deprecated. New platforms
-should only use the "stdout-path" property.
-
-linux,booted-from-kexec
------------------------
-
-This property is set (currently only on PowerPC, and only needed on
-book3e) by some versions of kexec-tools to tell the new kernel that it
-is being booted by kexec, as the booting environment may differ (e.g.
-a different secondary CPU release mechanism)
-
-linux,usable-memory-range
--------------------------
-
-This property holds a base address and size, describing a limited region in
-which memory may be considered available for use by the kernel. Memory outside
-of this range is not available for use.
-
-This property describes a limitation: memory within this range is only
-valid when also described through another mechanism that the kernel
-would otherwise use to determine available memory (e.g. memory nodes
-or the EFI memory map). Valid memory may be sparse within the range.
-e.g.
-
-/ {
-	chosen {
-		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
-	};
-};
-
-The main usage is for crash dump kernel to identify its own usable
-memory and exclude, at its boot time, any other memory areas that are
-part of the panicked kernel's memory.
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,elfcorehdr
-----------------
-
-This property holds the memory range, the address and the size, of the elf
-core header which mainly describes the panicked kernel's memory layout as
-PT_LOAD segments of elf format.
-e.g.
-
-/ {
-	chosen {
-		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
-	};
-};
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,initrd-start and linux,initrd-end
----------------------------------------
-
-These properties hold the physical start and end address of an initrd that's
-loaded by the bootloader. Note that linux,initrd-start is inclusive, but
-linux,initrd-end is exclusive.
-e.g.
-
-/ {
-	chosen {
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
index 2d98f7c4d3bc..9f9816fbecbc 100644
--- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -20,23 +20,33 @@ properties:
   compatible:
     const: google,cros-ec-typec
 
-  connector:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
     $ref: /schemas/connector/usb-connector.yaml#
+    required:
+      - reg
 
 required:
   - compatible
 
-additionalProperties: true #fixme
+additionalProperties: false
 
 examples:
   - |+
-    spi0 {
+    spi {
       #address-cells = <1>;
       #size-cells = <0>;
 
       cros_ec: ec@0 {
         compatible = "google,cros-ec-spi";
         reg = <0>;
+        interrupts = <35 0>;
 
         typec {
           compatible = "google,cros-ec-typec";
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
deleted file mode 100644
index d19885b7c73f..000000000000
--- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Actions Semi Owl Clock Management Unit (CMU)
-
-The Actions Semi Owl Clock Management Unit generates and supplies clock
-to various controllers within the SoC. The clock binding described here is
-applicable to S900, S700 and S500 SoC's.
-
-Required Properties:
-
-- compatible: should be one of the following,
-	"actions,s900-cmu"
-	"actions,s700-cmu"
-	"actions,s500-cmu"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: Reference to the parent clocks ("hosc", "losc")
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Each clock is assigned an identifier, and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in corresponding
-dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
-actions,s500-cmu.h header and can be used in device tree sources.
-
-External clocks:
-
-The hosc clock used as input for the plls is generated outside the SoC. It is
-expected that it is defined using standard clock bindings as "hosc".
-
-Actions Semi S900 CMU also requires one more clock:
- - "losc" - internal low frequency oscillator
-
-Example: Clock Management Unit node:
-
-        cmu: clock-controller@e0160000 {
-                compatible = "actions,s900-cmu";
-                reg = <0x0 0xe0160000 0x0 0x1000>;
-                clocks = <&hosc>, <&losc>;
-                #clock-cells = <1>;
-                #reset-cells = <1>;
-        };
-
-Example: UART controller node that consumes clock generated by the clock
-management unit:
-
-        uart: serial@e012a000 {
-                compatible = "actions,s900-uart", "actions,owl-uart";
-                reg = <0x0 0xe012a000 0x0 0x2000>;
-                interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&cmu CLK_UART5>;
-        };
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml b/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml
new file mode 100644
index 000000000000..28396441bc98
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/actions,owl-cmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl Clock Management Unit (CMU)
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Actions Semi Owl Clock Management Unit generates and supplies clock
+  to various controllers within the SoC.
+
+  See also:
+    include/dt-bindings/clock/actions,s500-cmu.h
+    include/dt-bindings/clock/actions,s700-cmu.h
+    include/dt-bindings/clock/actions,s900-cmu.h
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-cmu
+      - actions,s700-cmu
+      - actions,s900-cmu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Host oscillator source
+      - description: Internal low frequency oscillator source
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@e0160000 {
+        compatible = "actions,s900-cmu";
+        reg = <0xe0160000 0x1000>;
+        clocks = <&hosc>, <&losc>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 983033fe5b17..6eea1a41150a 100644
--- a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Analog Devices AXI clkgen pcore clock generator
+title: Analog Devices AXI clkgen pcore clock generator
 
 maintainers:
   - Lars-Peter Clausen <lars@metafoo.de>
@@ -26,9 +26,24 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
+
+  clock-output-names:
+    maxItems: 1
 
   '#clock-cells':
     const: 0
@@ -40,6 +55,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +66,7 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
+      clock-output-names = "spi_sclk";
     };
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..a8471367175b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - airoha,en7523-scu
+          - airoha,en7581-scu
+
+  reg:
+    items:
+      - description: scu base address
+      - description: misc scu base address
+    minItems: 1
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+  '#reset-cells':
+    description: ID of the controller reset line
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: airoha,en7523-scu
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          const: airoha,en7581-scu
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      scuclk: clock-controller@1fb00000 {
+        compatible = "airoha,en7581-scu";
+        reg = <0x0 0x1fb00000 0x0 0x970>;
+              #clock-cells = <1>;
+              #reset-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
index 558db4b6ed17..93587b700476 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHB Clock Device Tree Bindings
+title: Allwinner A10 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
index b1e3d739beb2..e14e1aad9fd6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
index 51b7a6d4ea54..8a4747ebe0ba 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB1 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
index d801158e15de..aa08dd49dd61 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AXI Clock Device Tree Bindings
+title: Allwinner A10 AXI Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index c4b7243ddcf2..1690b9d99c3d 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Clock Control Unit Device Tree Bindings
+title: Allwinner Clock Control Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -34,6 +34,8 @@ properties:
       - allwinner,sun8i-v3-ccu
       - allwinner,sun8i-v3s-ccu
       - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
       - allwinner,sun50i-a100-ccu
@@ -79,6 +81,7 @@ if:
       enum:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
         - allwinner,sun50i-a64-r-ccu
         - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
@@ -99,6 +102,7 @@ else:
     properties:
       compatible:
         enum:
+          - allwinner,sun20i-d1-ccu
           - allwinner,sun50i-a100-ccu
           - allwinner,sun50i-h6-ccu
           - allwinner,sun50i-h616-ccu
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
index 0dfafba1a168..08d073520cfa 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU Clock Device Tree Bindings
+title: Allwinner A10 CPU Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
index 7484a7ab7dea..e665e50c1785 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Clock Device Tree Bindings
+title: Allwinner A10 Display Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index 9a37a357cb4e..e588a7e8f260 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -132,7 +132,6 @@ examples:
                              "ahb_mp", "ahb_mali400";
     };
 
-
   - |
     clk@1c20068 {
         #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
index 18f131e262b4..e824e33489b6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MBUS Clock Device Tree Bindings
+title: Allwinner A10 MBUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
index 5199285a661a..c612f94befb9 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
index 3e2abe3e67c1..80ae3a7a588c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 0 Clock Device Tree Bindings
+title: Allwinner A10 Module 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
index 7ddb55c75cff..4f9a8d44d42a 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index c604822cda07..0052bf1e8a6b 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+title: Allwinner A10 Gateable Oscillator Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
index e5d9d45dab8a..b13a1f21d5da 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU PLL Device Tree Bindings
+title: Allwinner A10 CPU PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
index 4b80a42fb3da..418d207d23b8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video PLL Device Tree Bindings
+title: Allwinner A10 Video PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
index 415bd77de53d..76ef3f0c7f2c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DRAM PLL Device Tree Bindings
+title: Allwinner A10 DRAM PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
index ec5652f76027..a94c93c90ece 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Peripheral PLL Device Tree Bindings
+title: Allwinner A10 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
index 0a335c615efd..6646b2a99fc1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+title: Allwinner A10 TCON Channel 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
index cd95d25bfe7c..5103b675e488 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB Clock Device Tree Bindings
+title: Allwinner A10 USB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
index 5dfd0c1c27b4..80337e38d6e5 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Clock Device Tree Bindings
+title: Allwinner A10 Video Engine Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
new file mode 100644
index 000000000000..58be701a720e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun55i-a523-ccu.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun55i-a523-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A523 Clock Control Unit
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun55i-a523-ccu
+      - allwinner,sun55i-a523-mcu-ccu
+      - allwinner,sun55i-a523-r-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 9
+
+  clock-names:
+    minItems: 4
+    maxItems: 9
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-ccu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: High Frequency Oscillator (usually at 24MHz)
+            - description: Low Frequency Oscillator (usually at 32kHz)
+            - description: Internal Oscillator
+            - description: Low Frequency Oscillator fanout
+
+        clock-names:
+          items:
+            - const: hosc
+            - const: losc
+            - const: iosc
+            - const: losc-fanout
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-mcu-ccu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: High Frequency Oscillator (usually at 24MHz)
+            - description: Low Frequency Oscillator (usually at 32kHz)
+            - description: Internal Oscillator
+            - description: Audio PLL (4x)
+            - description: Peripherals PLL 0 (300 MHz output)
+            - description: DSP module clock
+            - description: MBUS clock
+            - description: PRCM AHB clock
+            - description: PRCM APB0 clock
+
+        clock-names:
+          items:
+            - const: hosc
+            - const: losc
+            - const: iosc
+            - const: pll-audio0-4x
+            - const: pll-periph0-300m
+            - const: dsp
+            - const: mbus
+            - const: r-ahb
+            - const: r-apb0
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-r-ccu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: High Frequency Oscillator (usually at 24MHz)
+            - description: Low Frequency Oscillator (usually at 32kHz)
+            - description: Internal Oscillator
+            - description: Peripherals PLL
+            - description: Audio PLL
+
+        clock-names:
+          items:
+            - const: hosc
+            - const: losc
+            - const: iosc
+            - const: pll-periph
+            - const: pll-audio
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@2001000 {
+        compatible = "allwinner,sun55i-a523-ccu";
+        reg = <0x02001000 0x1000>;
+        clocks = <&osc24M>, <&osc32k>, <&iosc>, <&r_ccu 1>;
+        clock-names = "hosc", "losc", "iosc", "losc-fanout";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
index 99add7991c48..c6a6fbb6863b 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 AHB Clock Device Tree Bindings
+title: Allwinner A13 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
index 5f377205af71..7d6a6a34d20c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral PLL Device Tree Bindings
+title: Allwinner A31 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
index 59e5dce1b65a..b6202de35707 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+title: Allwinner A20 GMAC TX Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
index c745733bcf04..fde7f7dc3d34 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Output Clock Device Tree Bindings
+title: Allwinner A20 Output Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
index e79eeac5f086..7fcd55d468d4 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+title: Allwinner A83t Display Engine 2/3 Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -25,9 +25,13 @@ properties:
       - const: allwinner,sun50i-a64-de2-clk
       - const: allwinner,sun50i-h5-de2-clk
       - const: allwinner,sun50i-h6-de3-clk
+      - const: allwinner,sun50i-h616-de33-clk
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
index 3eb2bf65b230..45b9e2c7c1d1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
index d178da90aaec..f0f65af8ae22 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 AHB Clock Device Tree Bindings
+title: Allwinner A80 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
index 0351c79bd221..e9f9bc8f5794 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A80 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
index 24d5b2f1a314..c48db2d49340 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 CPUS Clock Device Tree Bindings
+title: Allwinner A80 CPUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
index a82c7c7e942b..e9f81a343be1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+title: Allwinner A80 Display Engine Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 43963c3062c8..d3ce5eb18d4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 GT Bus Clock Device Tree Bindings
+title: Allwinner A80 GT Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
index 20dc115fa211..65ee5afe83cc 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+title: Allwinner A80 MMC Configuration Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
index b76bab6a30e9..261264a8aef6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Peripheral PLL Device Tree Bindings
+title: Allwinner A80 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
index 6532fb6821bc..515c15d5f661 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Clock Controller Device Tree Bindings
+title: Allwinner A80 USB Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
index 15218d10e78e..3f7b8d9511f1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Module Clock Device Tree Bindings
+title: Allwinner A80 USB Module Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
index 2569041684e6..0d49072d47ca 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Clock Device Tree Bindings
+title: Allwinner A80 USB PHY Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
deleted file mode 100644
index b3205b21c9d0..000000000000
--- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Alphascale Clock Controller
-
-The ACC (Alphascale Clock Controller) is responsible of choising proper
-clock source, setting deviders and clock gates.
-
-Required properties for the ACC node:
- - compatible: must be "alphascale,asm9260-clock-controller"
- - reg: must contain the ACC register base and size
- - #clock-cells : shall be set to 1.
-
-Simple one-cell clock specifier format is used, where the only cell is used
-as an index of the clock inside the provider.
-It is encouraged to use dt-binding for clock index definitions. SoC specific
-dt-binding should be included to the device tree descriptor. For example
-Alphascale ASM9260:
-#include <dt-bindings/clock/alphascale,asm9260.h>
-
-This binding contains two types of clock providers:
- _AHB_ - AHB gate;
- _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
-All clock specific details can be found in the SoC documentation.
-CLKID_AHB_ROM		0
-CLKID_AHB_RAM		1
-CLKID_AHB_GPIO		2
-CLKID_AHB_MAC		3
-CLKID_AHB_EMI		4
-CLKID_AHB_USB0		5
-CLKID_AHB_USB1		6
-CLKID_AHB_DMA0		7
-CLKID_AHB_DMA1		8
-CLKID_AHB_UART0		9
-CLKID_AHB_UART1		10
-CLKID_AHB_UART2		11
-CLKID_AHB_UART3		12
-CLKID_AHB_UART4		13
-CLKID_AHB_UART5		14
-CLKID_AHB_UART6		15
-CLKID_AHB_UART7		16
-CLKID_AHB_UART8		17
-CLKID_AHB_UART9		18
-CLKID_AHB_I2S0		19
-CLKID_AHB_I2C0		20
-CLKID_AHB_I2C1		21
-CLKID_AHB_SSP0		22
-CLKID_AHB_IOCONFIG	23
-CLKID_AHB_WDT		24
-CLKID_AHB_CAN0		25
-CLKID_AHB_CAN1		26
-CLKID_AHB_MPWM		27
-CLKID_AHB_SPI0		28
-CLKID_AHB_SPI1		29
-CLKID_AHB_QEI		30
-CLKID_AHB_QUADSPI0	31
-CLKID_AHB_CAMIF		32
-CLKID_AHB_LCDIF		33
-CLKID_AHB_TIMER0	34
-CLKID_AHB_TIMER1	35
-CLKID_AHB_TIMER2	36
-CLKID_AHB_TIMER3	37
-CLKID_AHB_IRQ		38
-CLKID_AHB_RTC		39
-CLKID_AHB_NAND		40
-CLKID_AHB_ADC0		41
-CLKID_AHB_LED		42
-CLKID_AHB_DAC0		43
-CLKID_AHB_LCD		44
-CLKID_AHB_I2S1		45
-CLKID_AHB_MAC1		46
-
-CLKID_SYS_CPU		47
-CLKID_SYS_AHB		48
-CLKID_SYS_I2S0M		49
-CLKID_SYS_I2S0S		50
-CLKID_SYS_I2S1M		51
-CLKID_SYS_I2S1S		52
-CLKID_SYS_UART0		53
-CLKID_SYS_UART1		54
-CLKID_SYS_UART2		55
-CLKID_SYS_UART3		56
-CLKID_SYS_UART4		56
-CLKID_SYS_UART5		57
-CLKID_SYS_UART6		58
-CLKID_SYS_UART7		59
-CLKID_SYS_UART8		60
-CLKID_SYS_UART9		61
-CLKID_SYS_SPI0		62
-CLKID_SYS_SPI1		63
-CLKID_SYS_QUADSPI	64
-CLKID_SYS_SSP0		65
-CLKID_SYS_NAND		66
-CLKID_SYS_TRACE		67
-CLKID_SYS_CAMM		68
-CLKID_SYS_WDT		69
-CLKID_SYS_CLKOUT	70
-CLKID_SYS_MAC		71
-CLKID_SYS_LCD		72
-CLKID_SYS_ADCANA	73
-
-Example of clock consumer with _SYS_ and _AHB_ sinks.
-uart4: serial@80010000 {
-	compatible = "alphascale,asm9260-uart";
-	reg = <0x80010000 0x4000>;
-	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
-	interrupts = <19>;
-};
-
-Clock consumer with only one, _AHB_ sink.
-timer0: timer@80088000 {
-	compatible = "alphascale,asm9260-timer";
-	reg = <0x80088000 0x4000>;
-	clocks = <&acc CLKID_AHB_TIMER0>;
-	interrupts = <29>;
-};
-
diff --git a/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml b/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml
new file mode 100644
index 000000000000..1caad419ce9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/alphascale,asm9260-clock-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale Clock Controller
+
+maintainers:
+  - Oleksij Rempel <linux@rempel-privat.de>
+
+description: |
+  The ACC (Alphascale Clock Controller) is responsible for choosing proper
+  clock source, setting dividers and clock gates.
+
+  Simple one-cell clock specifier format is used, where the only cell is used
+  as an index of the clock inside the provider.
+  It is encouraged to use dt-binding for clock index definitions. SoC specific
+  dt-binding should be included to the device tree descriptor. For example
+  Alphascale ASM9260:
+
+  #include <dt-bindings/clock/alphascale,asm9260.h>
+
+  This binding contains two types of clock providers:
+
+    _AHB_ - AHB gate;
+    _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+
+  All clock specific details can be found in the SoC documentation.
+
+properties:
+  compatible:
+    const: alphascale,asm9260-clock-controller
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
deleted file mode 100644
index f72e80e0dade..000000000000
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Device Tree Clock bindings for Altera's SoCFPGA platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"altr,socfpga-pll-clock" - for a PLL clock
-	"altr,socfpga-perip-clock" - The peripheral clock divided from the
-		PLL clock.
-	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
-		can get gated.
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
-	either an oscillator or a pll output.
-- #clock-cells : from common clock binding, shall be set to 0.
-
-Optional properties:
-- fixed-divider : If clocks have a fixed divider value, use this property.
-- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
-        and the bit index.
-- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
-	the divider register, bit shift, and width.
-- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
-	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
-	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
-	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
-	can be 0-315 degrees, in 45 degree increments.
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
new file mode 100644
index 000000000000..2568ad7dd0ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 Peripherals Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-peripherals-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div3
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input oscillator (usually at 24MHz)
+      - description: input sys pll
+    minItems: 6 # sys_pll is optional
+
+  clock-names:
+    items:
+      - const: fclk_div2
+      - const: fclk_div3
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: xtal
+      - const: sys_pll
+    minItems: 6 # sys_pll is optional
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@800 {
+            compatible = "amlogic,a1-peripherals-clkc";
+            reg = <0 0x800 0 0x104>;
+            #clock-cells = <1>;
+            clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+                     <&clkc_pll CLKID_FCLK_DIV3>,
+                     <&clkc_pll CLKID_FCLK_DIV5>,
+                     <&clkc_pll CLKID_FCLK_DIV7>,
+                     <&clkc_pll CLKID_HIFI_PLL>,
+                     <&xtal>,
+                     <&clkc_pll CLKID_SYS_PLL>;
+            clock-names = "fclk_div2", "fclk_div3",
+                          "fclk_div5", "fclk_div7",
+                          "hifi_pll", "xtal", "sys_pll";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
new file mode 100644
index 000000000000..c99274d2a9bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 PLL Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-pll-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixpll_in
+      - description: input hifipll_in
+      - description: input syspll_in
+    minItems: 2 # syspll_in is optional
+
+  clock-names:
+    items:
+      - const: fixpll_in
+      - const: hifipll_in
+      - const: syspll_in
+    minItems: 2 # syspll_in is optional
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@7c80 {
+            compatible = "amlogic,a1-pll-clkc";
+            reg = <0 0x7c80 0 0x18c>;
+            #clock-cells = <1>;
+            clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+                     <&clkc_periphs CLKID_HIFIPLL_IN>,
+                     <&clkc_periphs CLKID_SYSPLL_IN>;
+            clock-names = "fixpll_in", "hifipll_in", "syspll_in";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
deleted file mode 100644
index 3a8948c04bc9..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Amlogic AXG Audio Clock Controllers
-
-The Amlogic AXG audio clock controller generates and supplies clock to the
-other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
-devices.
-
-Required Properties:
-
-- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D,
-		  "amlogic,g12a-audio-clkc" for G12A,
-		  "amlogic,sm1-audio-clkc" for S905X3.
-- reg		: physical base address of the clock controller and length of
-		  memory mapped region.
-- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
-		  in clock-names.
-- clock-names	: must contain the following:
-		  * "pclk" - Main peripheral bus clock
-		  may contain the following:
-		  * "mst_in[0-7]" - 8 input plls to generate clock signals
-		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
-				      components.
-		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
-				       components.
-- resets	: phandle of the internal reset line
-- #clock-cells	: should be 1.
-- #reset-cells  : should be 1 on the g12a (and following) soc family
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
-used in device tree sources.
-
-Example:
-
-clkc_audio: clock-controller@0 {
-	compatible = "amlogic,axg-audio-clkc";
-	reg = <0x0 0x0 0x0 0xb4>;
-	#clock-cells = <1>;
-
-	clocks = <&clkc CLKID_AUDIO>,
-		 <&clkc CLKID_MPLL0>,
-		 <&clkc CLKID_MPLL1>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL3>,
-		 <&clkc CLKID_HIFI_PLL>,
-		 <&clkc CLKID_FCLK_DIV3>,
-		 <&clkc CLKID_FCLK_DIV4>,
-		 <&clkc CLKID_GP0_PLL>;
-	clock-names = "pclk",
-		      "mst_in0",
-		      "mst_in1",
-		      "mst_in2",
-		      "mst_in3",
-		      "mst_in4",
-		      "mst_in5",
-		      "mst_in6",
-		      "mst_in7";
-	resets = <&reset RESET_AUDIO>;
-};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml
new file mode 100644
index 000000000000..fd7982dd4cea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  The Amlogic AXG audio clock controller generates and supplies clock to the
+  other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+  devices.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-audio-clkc
+      - amlogic,g12a-audio-clkc
+      - amlogic,sm1-audio-clkc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main peripheral bus clock
+      - description: input plls to generate clock signals N0
+      - description: input plls to generate clock signals N1
+      - description: input plls to generate clock signals N2
+      - description: input plls to generate clock signals N3
+      - description: input plls to generate clock signals N4
+      - description: input plls to generate clock signals N5
+      - description: input plls to generate clock signals N6
+      - description: input plls to generate clock signals N7
+      - description: slave bit clock N0 provided by external components
+      - description: slave bit clock N1 provided by external components
+      - description: slave bit clock N2 provided by external components
+      - description: slave bit clock N3 provided by external components
+      - description: slave bit clock N4 provided by external components
+      - description: slave bit clock N5 provided by external components
+      - description: slave bit clock N6 provided by external components
+      - description: slave bit clock N7 provided by external components
+      - description: slave bit clock N8 provided by external components
+      - description: slave bit clock N9 provided by external components
+      - description: slave sample clock N0 provided by external components
+      - description: slave sample clock N1 provided by external components
+      - description: slave sample clock N2 provided by external components
+      - description: slave sample clock N3 provided by external components
+      - description: slave sample clock N4 provided by external components
+      - description: slave sample clock N5 provided by external components
+      - description: slave sample clock N6 provided by external components
+      - description: slave sample clock N7 provided by external components
+      - description: slave sample clock N8 provided by external components
+      - description: slave sample clock N9 provided by external components
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: mst_in0
+      - const: mst_in1
+      - const: mst_in2
+      - const: mst_in3
+      - const: mst_in4
+      - const: mst_in5
+      - const: mst_in6
+      - const: mst_in7
+      - const: slv_sclk0
+      - const: slv_sclk1
+      - const: slv_sclk2
+      - const: slv_sclk3
+      - const: slv_sclk4
+      - const: slv_sclk5
+      - const: slv_sclk6
+      - const: slv_sclk7
+      - const: slv_sclk8
+      - const: slv_sclk9
+      - const: slv_lrclk0
+      - const: slv_lrclk1
+      - const: slv_lrclk2
+      - const: slv_lrclk3
+      - const: slv_lrclk4
+      - const: slv_lrclk5
+      - const: slv_lrclk6
+      - const: slv_lrclk7
+      - const: slv_lrclk8
+      - const: slv_lrclk9
+
+  resets:
+    description: internal reset line
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-audio-clkc
+              - amlogic,sm1-audio-clkc
+    then:
+      required:
+        - '#reset-cells'
+    else:
+      properties:
+        '#reset-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clkc_audio: clock-controller@0 {
+            compatible = "amlogic,axg-audio-clkc";
+            reg = <0x0 0x0 0x0 0xb4>;
+            #clock-cells = <1>;
+
+            clocks = <&clkc CLKID_AUDIO>,
+                     <&clkc CLKID_MPLL0>,
+                     <&clkc CLKID_MPLL1>,
+                     <&clkc CLKID_MPLL2>,
+                     <&clkc CLKID_MPLL3>,
+                     <&clkc CLKID_HIFI_PLL>,
+                     <&clkc CLKID_FCLK_DIV3>,
+                     <&clkc CLKID_FCLK_DIV4>,
+                     <&clkc CLKID_GP0_PLL>,
+                     <&slv_sclk0>,
+                     <&slv_sclk1>,
+                     <&slv_sclk2>,
+                     <&slv_sclk3>,
+                     <&slv_sclk4>,
+                     <&slv_sclk5>,
+                     <&slv_sclk6>,
+                     <&slv_sclk7>,
+                     <&slv_sclk8>,
+                     <&slv_sclk9>,
+                     <&slv_lrclk0>,
+                     <&slv_lrclk1>,
+                     <&slv_lrclk2>,
+                     <&slv_lrclk3>,
+                     <&slv_lrclk4>,
+                     <&slv_lrclk5>,
+                     <&slv_lrclk6>,
+                     <&slv_lrclk7>,
+                     <&slv_lrclk8>,
+                     <&slv_lrclk9>;
+            clock-names = "pclk",
+                          "mst_in0",
+                          "mst_in1",
+                          "mst_in2",
+                          "mst_in3",
+                          "mst_in4",
+                          "mst_in5",
+                          "mst_in6",
+                          "mst_in7",
+                          "slv_sclk0",
+                          "slv_sclk1",
+                          "slv_sclk2",
+                          "slv_sclk3",
+                          "slv_sclk4",
+                          "slv_sclk5",
+                          "slv_sclk6",
+                          "slv_sclk7",
+                          "slv_sclk8",
+                          "slv_sclk9",
+                          "slv_lrclk0",
+                          "slv_lrclk1",
+                          "slv_lrclk2",
+                          "slv_lrclk3",
+                          "slv_lrclk4",
+                          "slv_lrclk5",
+                          "slv_lrclk6",
+                          "slv_lrclk7",
+                          "slv_lrclk8",
+                          "slv_lrclk9";
+            resets = <&reset RESET_AUDIO>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml
new file mode 100644
index 000000000000..98e30b8c0529
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series Peripheral Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+  - Chuan Liu <chuan.liu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,c3-peripherals-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 16
+    items:
+      - description: input oscillator (usually at 24MHz)
+      - description: input oscillators multiplexer
+      - description: input fix pll
+      - description: input fclk div 2
+      - description: input fclk div 2p5
+      - description: input fclk div 3
+      - description: input fclk div 4
+      - description: input fclk div 5
+      - description: input fclk div 7
+      - description: input gp0 pll
+      - description: input gp1 pll
+      - description: input hifi pll
+      - description: input sys clk
+      - description: input axi clk
+      - description: input sys pll div 16
+      - description: input cpu clk div 16
+      - description: input pad clock for rtc clk (optional)
+
+  clock-names:
+    minItems: 16
+    items:
+      - const: xtal_24m
+      - const: oscin
+      - const: fix
+      - const: fdiv2
+      - const: fdiv2p5
+      - const: fdiv3
+      - const: fdiv4
+      - const: fdiv5
+      - const: fdiv7
+      - const: gp0
+      - const: gp1
+      - const: hifi
+      - const: sysclk
+      - const: axiclk
+      - const: sysplldiv16
+      - const: cpudiv16
+      - const: pad_osc
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@0 {
+            compatible = "amlogic,c3-peripherals-clkc";
+            reg = <0x0 0x0 0x0 0x49c>;
+            #clock-cells = <1>;
+            clocks = <&xtal_24m>,
+                     <&scmi_clk 8>,
+                     <&scmi_clk 12>,
+                     <&clkc_pll 3>,
+                     <&clkc_pll 5>,
+                     <&clkc_pll 7>,
+                     <&clkc_pll 9>,
+                     <&clkc_pll 11>,
+                     <&clkc_pll 13>,
+                     <&clkc_pll 15>,
+                     <&scmi_clk 13>,
+                     <&clkc_pll 17>,
+                     <&scmi_clk 9>,
+                     <&scmi_clk 10>,
+                     <&scmi_clk 14>,
+                     <&scmi_clk 15>;
+            clock-names = "xtal_24m",
+                          "oscin",
+                          "fix",
+                          "fdiv2",
+                          "fdiv2p5",
+                          "fdiv3",
+                          "fdiv4",
+                          "fdiv5",
+                          "fdiv7",
+                          "gp0",
+                          "gp1",
+                          "hifi",
+                          "sysclk",
+                          "axiclk",
+                          "sysplldiv16",
+                          "cpudiv16";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml
new file mode 100644
index 000000000000..700865cc9792
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series PLL Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Chuan Liu <chuan.liu@amlogic.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,c3-pll-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input top pll
+      - description: input mclk pll
+      - description: input fix pll
+
+  clock-names:
+    items:
+      - const: top
+      - const: mclk
+      - const: fix
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@8000 {
+            compatible = "amlogic,c3-pll-clkc";
+            reg = <0x0 0x8000 0x0 0x1a4>;
+            clocks = <&scmi_clk 2>,
+                     <&scmi_clk 5>,
+                     <&scmi_clk 12>;
+            clock-names = "top", "mclk", "fix";
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
deleted file mode 100644
index c41f0be5d438..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Amlogic GXBB AO Clock and Reset Unit
-
-The Amlogic GXBB AO clock controller generates and supplies clock to various
-controllers within the Always-On part of the SoC.
-
-Required Properties:
-
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
-	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
-	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
-	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
-	- G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
-	followed by the common "amlogic,meson-gx-aoclkc"
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
-  * "xtal"     : the platform xtal
-  * "mpeg-clk" : the main clock controller mother clock (aka clk81)
-  * "ext-32k-0"  : external 32kHz reference #0 if any (optional)
-  * "ext-32k-1"  : external 32kHz reference #1 if any (optional - gx only)
-  * "ext-32k-2"  : external 32kHz reference #2 if any (optional - gx only)
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-- #reset-cells: should be 1.
-
-Each reset is assigned an identifier and client nodes can use this identifier
-to specify the reset which they consume. All available resets are defined as
-preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
-- reg: base address and size of the AO system control register space.
-
-Example: AO Clock controller node:
-
-ao_sysctrl: sys-ctrl@0 {
-	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
-	reg =  <0x0 0x0 0x0 0x100>;
-
-	clkc_AO: clock-controller {
-		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		clocks = <&xtal>, <&clkc CLKID_CLK81>;
-		clock-names = "xtal", "mpeg-clk";
-	};
-
-Example: UART controller node that consumes the clock and reset generated
-  by the clock controller:
-
-	uart_AO: serial@4c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0x4c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc_AO CLKID_AO_UART1>;
-		resets = <&clkc_AO RESET_AO_UART1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
new file mode 100644
index 000000000000..628e5dd33dd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Always-On Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-aoclkc
+              - amlogic,meson-gxl-aoclkc
+              - amlogic,meson-gxm-aoclkc
+              - amlogic,meson-axg-aoclkc
+          - const: amlogic,meson-gx-aoclkc
+      - enum:
+          - amlogic,meson-axg-aoclkc
+          - amlogic,meson-g12a-aoclkc
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: mpeg-clk
+      - const: ext-32k-0
+      - const: ext-32k-1
+      - const: ext-32k-2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-aoclkc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-aoclkc
+            - amlogic,meson-gxm-aoclkc
+            - amlogic,meson-axg-aoclkc
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
deleted file mode 100644
index 7ccecd5c02c1..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Amlogic GXBB Clock and Reset Unit
-
-The Amlogic GXBB clock controller generates and supplies clock to various
-controllers within the SoC.
-
-Required Properties:
-
-- compatible: should be:
-		"amlogic,gxbb-clkc" for GXBB SoC,
-		"amlogic,gxl-clkc" for GXL and GXM SoC,
-		"amlogic,axg-clkc" for AXG SoC.
-		"amlogic,g12a-clkc" for G12A SoC.
-		"amlogic,g12b-clkc" for G12B SoC.
-		"amlogic,sm1-clkc" for SM1 SoC.
-- clocks : list of clock phandle, one for each entry clock-names.
-- clock-names : should contain the following:
-  * "xtal": the platform xtal
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
-              "amlogic,meson-axg-hhi-sysctrl"
-- reg: base address and size of the HHI system control register space.
-
-Example: Clock controller node:
-
-sysctrl: system-controller@0 {
-	compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
-	reg = <0 0 0 0x400>;
-
-	clkc: clock-controller {
-		#clock-cells = <1>;
-		compatible = "amlogic,gxbb-clkc";
-		clocks = <&xtal>;
-		clock-names = "xtal";
-	};
-};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart_AO: serial@c81004c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0xc81004c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc CLKID_CLK81>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
new file mode 100644
index 000000000000..63246f1cb539
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,gxbb-clkc
+      - amlogic,gxl-clkc
+      - amlogic,axg-clkc
+      - amlogic,g12a-clkc
+      - amlogic,g12b-clkc
+      - amlogic,sm1-clkc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml
new file mode 100644
index 000000000000..ab73d4654171
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8-clkc
+          - amlogic,meson8b-clkc
+      - items:
+          - const: amlogic,meson8m2-clkc
+          - const: amlogic,meson8-clkc
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: ddr_pll
+      - const: clk_32k
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#reset-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
index 4b8669f870ec..d98d95d8e8c9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic DDR Clock Controller Device Tree Bindings
+title: Amlogic DDR Clock Controller
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
deleted file mode 100644
index cc51e4746b3b..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
-
-The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
-supplies clock to various controllers within the SoC.
-
-Required Properties:
-
-- compatible: must be one of:
-	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
-	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
-	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-- clocks: list of clock phandles, one for each entry in clock-names
-- clock-names: should contain the following:
-  * "xtal": the 24MHz system oscillator
-  * "ddr_pll": the DDR PLL clock
-  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
-- reg: base address and size of the HHI system control register space.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
-used in device tree sources.
-
-Similarly a preprocessor macro for each reset line is defined in
-dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
-device tree sources).
-
-
-Example: Clock controller node:
-
-	clkc: clock-controller {
-		compatible = "amlogic,meson8b-clkc";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart_AO: serial@c81004c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0xc81004c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc CLKID_CLK81>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
new file mode 100644
index 000000000000..c229e4f0c1d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic S4 Peripherals Clock Controller
+
+maintainers:
+  - Yu Tu <yu.tu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,s4-peripherals-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 14
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div2p5
+      - description: input fixed pll div3
+      - description: input fixed pll div4
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input gp0 pll
+      - description: input mpll0
+      - description: input mpll1
+      - description: input mpll2
+      - description: input mpll3
+      - description: input hdmi pll
+      - description: input oscillator (usually at 24MHz)
+      - description: input external 32kHz reference (optional)
+
+  clock-names:
+    minItems: 14
+    items:
+      - const: fclk_div2
+      - const: fclk_div2p5
+      - const: fclk_div3
+      - const: fclk_div4
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: gp0_pll
+      - const: mpll0
+      - const: mpll1
+      - const: mpll2
+      - const: mpll3
+      - const: hdmi_pll
+      - const: xtal
+      - const: ext_32k
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+
+    clkc_periphs: clock-controller@fe000000 {
+      compatible = "amlogic,s4-peripherals-clkc";
+      reg = <0xfe000000 0x49c>;
+      clocks = <&clkc_pll 3>,
+              <&clkc_pll 13>,
+              <&clkc_pll 5>,
+              <&clkc_pll 7>,
+              <&clkc_pll 9>,
+              <&clkc_pll 11>,
+              <&clkc_pll 17>,
+              <&clkc_pll 15>,
+              <&clkc_pll 25>,
+              <&clkc_pll 27>,
+              <&clkc_pll 29>,
+              <&clkc_pll 31>,
+              <&clkc_pll 20>,
+              <&xtal>;
+      clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4",
+                    "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll",
+                    "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
new file mode 100644
index 000000000000..d8932ec26ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic S4 PLL Clock Controller
+
+maintainers:
+  - Yu Tu <yu.tu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,s4-pll-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc_pll: clock-controller@fe008000 {
+      compatible = "amlogic,s4-pll-clkc";
+      reg = <0xfe008000 0x1e8>;
+      clocks = <&xtal>;
+      clock-names = "xtal";
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml b/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml
new file mode 100644
index 000000000000..b27bcb2a9ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apm,xgene-device-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC device clocks
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-device-clock
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - enum: [ csr-reg, div-reg ]
+      - const: div-reg
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  csr-offset:
+    description: Offset to the CSR reset register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  csr-mask:
+    description: CSR reset mask bit
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0xf
+
+  enable-offset:
+    description: Offset to the enable register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+
+  enable-mask:
+    description: CSR enable mask bit
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0xf
+
+  divider-offset:
+    description: Offset to the divider register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  divider-width:
+    description: Width of the divider register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  divider-shift:
+    description: Bit shift of the divider register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-output-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml b/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml
new file mode 100644
index 000000000000..bdd4a6b92bbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apm,xgene-socpll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC PLL, PCPPLL, and PMD clocks
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apm,xgene-pcppll-clock
+          - apm,xgene-pcppll-v2-clock
+          - apm,xgene-pmd-clock
+          - apm,xgene-socpll-clock
+          - apm,xgene-socpll-v2-clock
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - enum: [ csr-reg, div-reg ]
+      - const: div-reg
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum: [ pcppll, socpll ]
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-output-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 000000000000..080454f56721
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: apple,t6020-nco
+          - const: apple,t8103-nco
+      - items:
+          - enum:
+              # Do not add additional SoC to this list.
+              - apple,t6000-nco
+              - apple,t8103-nco
+              - apple,t8112-nco
+          - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index 90eadf6869b2..b5533f81307c 100644
--- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -81,11 +81,11 @@ properties:
     maxItems: 1
 
   lock-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset to the unlocking register for the oscillator
 
   vco-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset to the VCO register for the oscillator
     deprecated: true
 
diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
deleted file mode 100644
index fbf58c443c04..000000000000
--- a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Peripheral Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs provide peripheral clocks which are
-used as clock source for the peripheral of the SoC.
-
-There are two different blocks associated to north bridge and south
-bridge.
-
-The peripheral clock consumer should specify the desired clock by
-having the clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs for Armada 3700 North bridge clocks:
-ID	Clock name	Description
------------------------------------
-0	mmc		MMC controller
-1	sata_host	Sata Host
-2	sec_at		Security AT
-3	sac_dap		Security DAP
-4	tsecm		Security Engine
-5	setm_tmx	Serial Embedded Trace Module
-6	avs		Adaptive Voltage Scaling
-7	sqf		SPI
-8	pwm		PWM
-9	i2c_2		I2C 2
-10	i2c_1		I2C 1
-11	ddr_phy		DDR PHY
-12	ddr_fclk	DDR F clock
-13	trace		Trace
-14	counter		Counter
-15	eip97		EIP 97
-16	cpu		CPU
-
-The following is a list of provided IDs for Armada 3700 South bridge clocks:
-ID	Clock name	Description
------------------------------------
-0	gbe-50		50 MHz parent clock for Gigabit Ethernet
-1	gbe-core	parent clock for Gigabit Ethernet core
-2	gbe-125		125 MHz parent clock for Gigabit Ethernet
-3	gbe1-50		50 MHz clock for Gigabit Ethernet port 1
-4	gbe0-50		50 MHz clock for Gigabit Ethernet port 0
-5	gbe1-125	125 MHz clock for Gigabit Ethernet port 1
-6	gbe0-125	125 MHz clock for Gigabit Ethernet port 0
-7	gbe1-core	Gigabit Ethernet core port 1
-8	gbe0-core	Gigabit Ethernet core port 0
-9	gbe-bm		Gigabit Ethernet Buffer Manager
-10	sdio		SDIO
-11	usb32-sub2-sys	USB 2 clock
-12	usb32-ss-sys	USB 3 clock
-13	pcie		PCIe controller
-
-Required properties:
-
-- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
-  north bridge block, or
-  "marvell,armada-3700-periph-clock-sb" for the south bridge block
-- reg : must be the register address of North/South Bridge Clock register
-- #clock-cells : from common clock binding; shall be set to 1
-
-- clocks : list of the parent clock phandle in the following order:
-  TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
-
-
-Example:
-
-nb_perih_clk: nb-periph-clk@13000{
-	compatible = "marvell,armada-3700-periph-clock-nb";
-	reg = <0x13000 0x1000>;
-	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
-	<&tbg 3>, <&xtalclk>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
deleted file mode 100644
index ed1df32c577a..000000000000
--- a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs provide Time Base Generator clocks which are
-used as parent clocks for the peripheral clocks.
-
-The TBG clock consumer should specify the desired clock by having the
-clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs and clock names on Armada 3700:
- 0 = TBG A P
- 1 = TBG B P
- 2 = TBG A S
- 3 = TBG B S
-
-Required properties:
-- compatible : shall be "marvell,armada-3700-tbg-clock"
-- reg : must be the register address of North Bridge PLL register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Example:
-
-tbg: tbg@13200 {
-	compatible = "marvell,armada-3700-tbg-clock";
-	reg = <0x13200 0x1000>;
-	clocks = <&xtalclk>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
deleted file mode 100644
index 4c0807f28cfa..000000000000
--- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Xtal Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
-reading the gpio latch register.
-
-This node must be a subnode of the node exposing the register address
-of the GPIO block where the gpio latch is located.
-See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"marvell,armada-3700-xtal-clock"
-- #clock-cells : from common clock binding; shall be set to 0
-
-Optional properties:
-- clock-output-names : from common clock binding; allows overwrite default clock
-	output names ("xtal")
-
-Example:
-pinctrl_nb: pinctrl-nb@13800 {
-	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
-	reg = <0x13800 0x100>, <0x13C00 0x20>;
-
-	xtalclk: xtal-clk {
-		compatible = "marvell,armada-3700-xtal-clock";
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt
deleted file mode 100644
index dff9cdf0009c..000000000000
--- a/Documentation/devicetree/bindings/clock/artpec6.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Axis ARTPEC-6 chip
-
-The bindings are based on the clock provider binding in
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-External clocks:
-----------------
-
-There are two external inputs to the main clock controller which should be
-provided using the common clock bindings.
-- "sys_refclk": External 50 Mhz oscillator (required)
-- "i2s_refclk": Alternate audio reference clock (optional).
-
-Main clock controller
----------------------
-
-Required properties:
-- #clock-cells: Should be <1>
-  See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
-- compatible: Should be "axis,artpec6-clkctrl"
-- reg: Must contain the base address and length of the system controller
-- clocks:  Must contain a phandle entry for each clock in clock-names
-- clock-names: Must include the external oscillator ("sys_refclk"). Optional
-  ones are the audio reference clock ("i2s_refclk") and the audio fractional
-  dividers ("frac_clk0" and "frac_clk1").
-
-Examples:
-
-ext_clk: ext_clk {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <50000000>;
-};
-
-clkctrl: clkctrl@f8000000 {
-	#clock-cells = <1>;
-	compatible = "axis,artpec6-clkctrl";
-	reg = <0xf8000000 0x48>;
-	clocks = <&ext_clk>;
-	clock-names = "sys_refclk";
-};
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
deleted file mode 100644
index 13f45db3b66d..000000000000
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device Tree Clock bindings for arch-at91
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Slow Clock controller:
-
-Required properties:
-- compatible : shall be one of the following:
-	"atmel,at91sam9x5-sckc",
-	"atmel,sama5d3-sckc",
-	"atmel,sama5d4-sckc" or
-	"microchip,sam9x60-sckc":
-		at91 SCKC (Slow Clock Controller)
-- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
-- clocks : shall be the input parent clock phandle for the clock.
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
-  provided on XIN.
-
-For example:
-	sckc@fffffe50 {
-		compatible = "atmel,at91sam9x5-sckc";
-		reg = <0xfffffe50 0x4>;
-		clocks = <&slow_xtal>;
-		#clock-cells = <0>;
-	};
-
-Power Management Controller (PMC):
-
-Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon" or
-	"microchip,sam9x60-pmc"
-	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
-	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
-	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
-	sama5d2, sama5d3 or sama5d4.
-- #clock-cells : from common clock binding; shall be set to 2. The first entry
-  is the type of the clock (core, system, peripheral or generated) and the
-  second entry its index as provided by the datasheet
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries: "slow_clk", "main_xtal"
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
-  provided on XIN.
-
-For example:
-	pmc: pmc@f0018000 {
-		compatible = "atmel,sama5d4-pmc", "syscon";
-		reg = <0xf0018000 0x120>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-		#clock-cells = <2>;
-		clocks = <&clk32k>, <&main_xtal>;
-		clock-names = "slow_clk", "main_xtal";
-	};
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 000000000000..e803a1fc3681
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The power management controller optimizes power consumption by controlling all
+  system and user peripheral clocks. The PMC enables/disables the clock inputs
+  to many of the peripherals and to the processor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9g20-pmc
+          - const: atmel,at91sam9260-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91sam9g15-pmc
+              - atmel,at91sam9g25-pmc
+              - atmel,at91sam9g35-pmc
+              - atmel,at91sam9x25-pmc
+              - atmel,at91sam9x35-pmc
+          - const: atmel,at91sam9x5-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9261-pmc
+              - atmel,at91sam9263-pmc
+              - atmel,at91sam9g45-pmc
+              - atmel,at91sam9n12-pmc
+              - atmel,at91sam9rl-pmc
+              - atmel,at91sam9x5-pmc
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+              - microchip,sam9x60-pmc
+              - microchip,sam9x7-pmc
+              - microchip,sama7d65-pmc
+              - microchip,sama7g5-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description: |
+      - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+        PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+        in <dt-bindings/clock/at91.h>)
+      - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+        (for core clocks) or as defined in datasheet (for system, peripheral,
+        gck and programmable clocks).
+    const: 2
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  atmel,osc-bypass:
+    description: set when a clock signal is directly provided on XIN
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-pmc
+              - microchip,sam9x7-pmc
+              - microchip,sama7d65-pmc
+              - microchip,sama7g5-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: td_slck
+            - const: md_slck
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9261-pmc
+              - atmel,at91sam9263-pmc
+              - atmel,at91sam9g20-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_xtal
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_clk
+            - const: main_xtal
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: clock-controller@f0018000 {
+        compatible = "atmel,sama5d4-pmc", "syscon";
+        reg = <0xf0018000 0x120>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        #clock-cells = <2>;
+        clocks = <&clk32k>, <&main_xtal>;
+        clock-names = "slow_clk", "main_xtal";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
new file mode 100644
index 000000000000..d4cf8ae2961e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Slow Clock Controller (SCKC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9x5-sckc
+          - atmel,sama5d3-sckc
+          - atmel,sama5d4-sckc
+          - microchip,sam9x60-sckc
+      - items:
+          - enum:
+              - microchip,sam9x7-sckc
+              - microchip,sama7d65-sckc
+              - microchip,sama7g5-sckc
+          - const: microchip,sam9x60-sckc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    enum: [0, 1]
+
+  atmel,osc-bypass:
+    type: boolean
+    description: set when a clock signal is directly provided on XIN
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-sckc
+    then:
+      properties:
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        "#clock-cells":
+          const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    clk32k: clock-controller@fffffe50 {
+        compatible = "microchip,sam9x60-sckc";
+        reg = <0xfffffe50 0x4>;
+        clocks = <&slow_xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml b/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml
new file mode 100644
index 000000000000..a78269369df8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/axis,artpec6-clkctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC-6 clock controller
+
+maintainers:
+  - Lars Persson <lars.persson@axis.com>
+
+properties:
+  compatible:
+    const: axis,artpec6-clkctrl
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: external 50 MHz oscillator.
+      - description: optional audio reference clock.
+      - description: fractional audio clock divider 0.
+      - description: fractional audio clock divider 1.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_refclk
+      - const: i2s_refclk
+      - const: frac_clk0
+      - const: frac_clk1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f8000000 {
+        compatible = "axis,artpec6-clkctrl";
+        reg = <0xf8000000 0x48>;
+        #clock-cells = <1>;
+        clocks = <&ext_clk>;
+        clock-names = "sys_refclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/axis,artpec8-clock.yaml b/Documentation/devicetree/bindings/clock/axis,artpec8-clock.yaml
new file mode 100644
index 000000000000..277af48ac841
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axis,artpec8-clock.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/axis,artpec8-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC-8 SoC clock controller
+
+maintainers:
+  - Jesper Nilsson <jesper.nilsson@axis.com>
+
+description: |
+  ARTPEC-8 clock controller is comprised of several CMU (Clock Management Unit)
+  units, generating clocks for different domains. Those CMU units are modeled
+  as separate device tree nodes, and might depend on each other.
+  The root clock in that root tree is an external clock: OSCCLK (25 MHz).
+  This external clock must be defined as a fixed-rate clock in dts.
+
+  CMU_CMU is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_CMU.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/axis,artpec8-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - axis,artpec8-cmu-cmu
+      - axis,artpec8-cmu-bus
+      - axis,artpec8-cmu-core
+      - axis,artpec8-cmu-cpucl
+      - axis,artpec8-cmu-fsys
+      - axis,artpec8-cmu-imem
+      - axis,artpec8-cmu-peri
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-cmu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-bus
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_BUS BUS clock (from CMU_CMU)
+            - description: CMU_BUS DLP clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: bus
+            - const: dlp
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_CORE main clock (from CMU_CMU)
+            - description: CMU_CORE DLP clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: main
+            - const: dlp
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-cpucl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_CPUCL switch clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: switch
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_FSYS SCAN0 clock (from CMU_CMU)
+            - description: CMU_FSYS SCAN1 clock (from CMU_CMU)
+            - description: CMU_FSYS BUS clock (from CMU_CMU)
+            - description: CMU_FSYS IP clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: scan0
+            - const: scan1
+            - const: bus
+            - const: ip
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-imem
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_IMEM ACLK clock (from CMU_CMU)
+            - description: CMU_IMEM JPEG clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: aclk
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          const: axis,artpec8-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25 MHz)
+            - description: CMU_PERI IP clock (from CMU_CMU)
+            - description: CMU_PERI AUDIO clock (from CMU_CMU)
+            - description: CMU_PERI DISP clock (from CMU_CMU)
+
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ip
+            - const: audio
+            - const: disp
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS
+  - |
+    #include <dt-bindings/clock/axis,artpec8-clk.h>
+
+    cmu_fsys: clock-controller@16c10000 {
+        compatible = "axis,artpec8-cmu-fsys";
+        reg = <0x16c10000 0x4000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+                 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+                 <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+                 <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+        clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
index bd4cefbb1244..30252c95700c 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -134,9 +134,13 @@ properties:
   "#reset-cells":
     const: 1
 
-  clocks: true
+  clocks:
+    minItems: 3
+    maxItems: 4
 
-  clock-names: true
+  clock-names:
+    minItems: 3
+    maxItems: 4
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
     clk25m: clock-oscillator-25m {
       compatible = "fixed-clock";
       #clock-cells = <0>;
-      clock-frequency  = <25000000>;
+      clock-frequency = <25000000>;
       clock-output-names = "clk25m";
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 228c9313df53..f0f9392470a6 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
index 08543ecbe35b..2d40df2d34df 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+title: Broadcom BCM2711 HDMI DVP
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
deleted file mode 100644
index 4acfc8f641b6..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom BCM2835 auxiliary peripheral support
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
-area controlling clock gating to the peripherals, and providing an IRQ
-status register.
-
-Required properties:
-- compatible:	Should be "brcm,bcm2835-aux"
-- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
-		  found in include/dt-bindings/clock/bcm2835-aux.h
-- reg:		Specifies base physical address and size of the registers
-- clocks:	The parent clock phandle
-
-Example:
-
-	clocks: cprman@7e101000 {
-		compatible = "brcm,bcm2835-cprman";
-		#clock-cells = <1>;
-		reg = <0x7e101000 0x2000>;
-		clocks = <&clk_osc>;
-	};
-
-	aux: aux@7e215004 {
-		compatible = "brcm,bcm2835-aux";
-		#clock-cells = <1>;
-		reg = <0x7e215000 0x8>;
-		clocks = <&clocks BCM2835_CLOCK_VPU>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml
new file mode 100644
index 000000000000..0f4050ffa41c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2835-aux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 auxiliary peripheral clock
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+  area controlling clock gating to the peripherals, and providing an IRQ
+  status register.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-aux
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    clock@7e215000 {
+        compatible = "brcm,bcm2835-aux";
+        reg = <0x7e215000 0x8>;
+        #clock-cells = <1>;
+        clocks = <&clocks BCM2835_CLOCK_VPU>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
deleted file mode 100644
index 9e0b03a6519b..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Broadcom BCM2835 CPRMAN clocks
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CPRMAN clock controller generates clocks in the audio power domain
-of the BCM2835.  There is a level of PLLs deriving from an external
-oscillator, a level of PLL dividers that produce channels off of the
-few PLLs, and a level of mostly-generic clock generators sourcing from
-the PLL channels.  Most other hardware components source from the
-clock generators, but a few (like the ARM or HDMI) will source from
-the PLL dividers directly.
-
-Required properties:
-- compatible:	should be one of the following,
-	"brcm,bcm2711-cprman"
-	"brcm,bcm2835-cprman"
-- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
-		  found in include/dt-bindings/clock/bcm2835.h
-- reg:		Specifies base physical address and size of the registers
-- clocks:	phandles to the parent clocks used as input to the module, in
-		  the following order:
-
-		  - External oscillator
-		  - DSI0 byte clock
-		  - DSI0 DDR2 clock
-		  - DSI0 DDR clock
-		  - DSI1 byte clock
-		  - DSI1 DDR2 clock
-		  - DSI1 DDR clock
-
-		  Only external oscillator is required.  The DSI clocks may
-		  not be present, in which case their children will be
-		  unusable.
-
-Example:
-
-	clk_osc: clock@3 {
-		compatible = "fixed-clock";
-		reg = <3>;
-		#clock-cells = <0>;
-		clock-output-names = "osc";
-		clock-frequency = <19200000>;
-	};
-
-	clocks: cprman@7e101000 {
-		compatible = "brcm,bcm2835-cprman";
-		#clock-cells = <1>;
-		reg = <0x7e101000 0x2000>;
-		clocks = <&clk_osc>;
-	};
-
-	i2c0: i2c@7e205000 {
-		compatible = "brcm,bcm2835-i2c";
-		reg = <0x7e205000 0x1000>;
-		interrupts = <2 21>;
-		clocks = <&clocks BCM2835_CLOCK_VPU>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml
new file mode 100644
index 000000000000..b0cf76c74bc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2835-cprman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 CPRMAN clocks
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The CPRMAN clock controller generates clocks in the audio power domain of the
+  BCM2835.  There is a level of PLLs deriving from an external oscillator, a
+  level of PLL dividers that produce channels off of the few PLLs, and a level
+  of mostly-generic clock generators sourcing from the PLL channels.  Most other
+  hardware components source from the clock generators, but a few (like the ARM
+  or HDMI) will source from the PLL dividers directly.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-cprman
+      - brcm,bcm2835-cprman
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External oscillator clock.
+      - description: DSI0 byte clock.
+      - description: DSI0 DDR2 clock.
+      - description: DSI0 DDR clock.
+      - description: DSI1 byte clock.
+      - description: DSI1 DDR2 clock.
+      - description: DSI1 DDR clock.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+
+examples:
+  - |
+    clock-controller@7e101000 {
+        compatible = "brcm,bcm2835-cprman";
+        reg = <0x7e101000 0x2000>;
+        #clock-cells = <1>;
+        clocks = <&clk_osc>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
deleted file mode 100644
index 2ebb107331dd..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom BCM53573 ILP clock
-===========================
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-This binding is used for ILP clock (sometimes referred as "slow clock")
-on Broadcom BCM53573 devices using Cortex-A7 CPU.
-
-ILP's rate has to be calculated on runtime and it depends on ALP clock
-which has to be referenced.
-
-This clock is part of PMU (Power Management Unit), a Broadcom's device
-handing power-related aspects. Its node must be sub-node of the PMU
-device.
-
-Required properties:
-- compatible: "brcm,bcm53573-ilp"
-- clocks: has to reference an ALP clock
-- #clock-cells: should be <0>
-- clock-output-names: from common clock bindings, should contain clock
-		      name
-
-Example:
-
-pmu@18012000 {
-	compatible = "simple-mfd", "syscon";
-	reg = <0x18012000 0x00001000>;
-
-	ilp {
-		compatible = "brcm,bcm53573-ilp";
-		clocks = <&alp>;
-		#clock-cells = <0>;
-		clock-output-names = "ilp";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml
new file mode 100644
index 000000000000..cd291f428a8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm53573-ilp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53573 ILP clock
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: >
+  ILP clock (sometimes referred as "slow clock") on Broadcom BCM53573 devices
+  using Cortex-A7 CPU.
+
+  ILP's rate has to be calculated on runtime and it depends on ALP clock which
+  has to be referenced.
+
+  This clock is part of PMU (Power Management Unit), a Broadcom device handling
+  power-related aspects. Its node must be sub-node of the PMU device.
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm53573-ilp
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    items:
+      - const: ilp
+
+additionalProperties: false
+
+examples:
+  - |
+    ilp {
+        compatible = "brcm,bcm53573-ilp";
+        clocks = <&alp>;
+        #clock-cells = <0>;
+        clock-output-names = "ilp";
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
new file mode 100644
index 000000000000..cd0d763ce2f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 Timer Clock and Reset
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm63268-timer-clocks
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    timer_clk: clock-controller@100000ac {
+      compatible = "brcm,bcm63268-timer-clocks";
+      reg = <0x100000ac 0x4>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
deleted file mode 100644
index 3e7ca5530775..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
-
-Required properties:
-- compatible: must be one of:
-	 "brcm,bcm3368-clocks"
-	 "brcm,bcm6318-clocks"
-	 "brcm,bcm6318-ubus-clocks"
-	 "brcm,bcm6328-clocks"
-	 "brcm,bcm6358-clocks"
-	 "brcm,bcm6362-clocks"
-	 "brcm,bcm6368-clocks"
-	 "brcm,bcm63268-clocks"
-
-- reg: Address and length of the register set
-- #clock-cells: must be <1>
-
-
-Example:
-
-clkctl: clock-controller@10000004 {
-	compatible = "brcm,bcm6328-clocks";
-	reg = <0x10000004 0x4>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml
new file mode 100644
index 000000000000..56909ea499a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63xx-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS based BCM63XX SoCs Gated Clock Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm3368-clocks
+      - brcm,bcm6318-clocks
+      - brcm,bcm6318-ubus-clocks
+      - brcm,bcm6328-clocks
+      - brcm,bcm6358-clocks
+      - brcm,bcm6362-clocks
+      - brcm,bcm6368-clocks
+      - brcm,bcm63268-clocks
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000004 {
+        compatible = "brcm,bcm6328-clocks";
+        reg = <0x10000004 0x4>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
deleted file mode 100644
index 8e5a7d868557..000000000000
--- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Broadcom Kona Family Clocks
-
-This binding is associated with Broadcom SoCs having "Kona" style
-clock control units (CCUs).  A CCU is a clock provider that manages
-a set of clock signals.  Each CCU is represented by a node in the
-device tree.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible
-	Shall have a value of the form "brcm,<model>-<which>-ccu",
-	where <model> is a Broadcom SoC model number and <which> is
-	the name of a defined CCU.  For example:
-	    "brcm,bcm11351-root-ccu"
-	The compatible strings used for each supported SoC family
-	are defined below.
-- reg
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells
-	Shall have value <1>.  The permitted clock-specifier values
-	are defined below.
-- clock-output-names
-	Shall be an ordered list of strings defining the names of
-	the clocks provided by the CCU.
-
-Device tree example:
-
-	slave_ccu: slave_ccu {
-		compatible = "brcm,bcm11351-slave-ccu";
-		reg = <0x3e011000 0x0f00>;
-		#clock-cells = <1>;
-		clock-output-names = "uartb",
-				     "uartb2",
-				     "uartb3",
-				     "uartb4";
-	};
-
-	ref_crystal_clk: ref_crystal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-BCM281XX family
----------------
-CCU compatible string values for SoCs in the BCM281XX family are:
-    "brcm,bcm11351-root-ccu"
-    "brcm,bcm11351-aon-ccu"
-    "brcm,bcm11351-hub-ccu"
-    "brcm,bcm11351-master-ccu"
-    "brcm,bcm11351-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM281XX family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm281xx.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
-    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
-    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
-
-    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
-
-    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
-    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
-    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
-    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
-    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
-
-    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
-    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
-    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
-    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
-    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
-    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
-    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
-
-
-BCM21664 family
----------------
-CCU compatible string values for SoCs in the BCM21664 family are:
-    "brcm,bcm21664-root-ccu"
-    "brcm,bcm21664-aon-ccu"
-    "brcm,bcm21664-master-ccu"
-    "brcm,bcm21664-slave-ccu"
-
-The following table defines the set of CCUs and clock specifiers for
-BCM21664 family clocks.  When a clock consumer references a clocks,
-its symbolic specifier (rather than its numeric index value) should
-be used.  These specifiers are defined in:
-    "include/dt-bindings/clock/bcm21664.h"
-
-    CCU     Clock           Type    Index   Specifier
-    ---     -----           ----    -----   ---------
-    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
-
-    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
-
-    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
-    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
-    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
-    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
-    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
-    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
-    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
-    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
-
-    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
-    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
-    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
-    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
-    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
-    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
-    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
-    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml
new file mode 100644
index 000000000000..e5656950b3bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,kona-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family clock control units (CCU)
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  Broadcom "Kona" style clock control unit (CCU) is a clock provider that
+  manages a set of clock signals.
+
+  All available clock IDs are defined in
+  - include/dt-bindings/clock/bcm281xx.h for BCM281XX family
+  - include/dt-bindings/clock/bcm21664.h for BCM21664 family
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm11351-aon-ccu
+      - brcm,bcm11351-hub-ccu
+      - brcm,bcm11351-master-ccu
+      - brcm,bcm11351-root-ccu
+      - brcm,bcm11351-slave-ccu
+      - brcm,bcm21664-aon-ccu
+      - brcm,bcm21664-master-ccu
+      - brcm,bcm21664-root-ccu
+      - brcm,bcm21664-slave-ccu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 10
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: hub_timer
+            - const: pmu_bsc
+            - const: pmu_bsc_var
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-hub-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: tmon_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: usb_ic
+            - const: hsic2_48m
+            - const: hsic2_12m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm11351-root-ccu
+              - brcm,bcm21664-root-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: frac_1m
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: uartb4
+            - const: ssp0
+            - const: ssp2
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: pwm
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-aon-ccu
+    then:
+      properties:
+        clock-output-names:
+          const: hub_timer
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-master-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: sdio1
+            - const: sdio2
+            - const: sdio3
+            - const: sdio4
+            - const: sdio1_sleep
+            - const: sdio2_sleep
+            - const: sdio3_sleep
+            - const: sdio4_sleep
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm21664-slave-ccu
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: uartb
+            - const: uartb2
+            - const: uartb3
+            - const: bsc1
+            - const: bsc2
+            - const: bsc3
+            - const: bsc4
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3e011000 {
+      compatible = "brcm,bcm11351-slave-ccu";
+      reg = <0x3e011000 0x0f00>;
+      #clock-cells = <1>;
+      clock-output-names = "uartb",
+                           "uartb2",
+                           "uartb3",
+                           "uartb4",
+                           "ssp0",
+                           "ssp2",
+                           "bsc1",
+                           "bsc2",
+                           "bsc3",
+                           "pwm";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
index a34cbf3c9aaf..a88fbe20fef1 100644
--- a/Documentation/devicetree/bindings/clock/calxeda.yaml
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Clock bindings for Calxeda highbank platform
+title: Calxeda highbank platform Clock Controller
 
 description: |
   This binding covers the Calxeda SoC internal peripheral and bus clocks
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
index 7f5cf4001f76..380cb6d80025 100644
--- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 Clock Device Tree Bindings
+title: Canaan Kendryte K210 Clock
 
 maintainers:
-  - Damien Le Moal <damien.lemoal@wdc.com>
+  - Damien Le Moal <dlemoal@kernel.org>
 
 description: |
   Canaan Kendryte K210 SoC clocks driver bindings. The clock
diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 000000000000..d416c374e853
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml b/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml
new file mode 100644
index 000000000000..fbd0d50d46a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,ep7209-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Clock Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description:
+  See include/dt-bindings/clock/clps711x-clock.h for the full list of CLPS711X
+  clock IDs.
+
+properties:
+  compatible:
+    items:
+      - const: cirrus,ep7312-clk
+      - const: cirrus,ep7209-clk
+
+  reg:
+    maxItems: 1
+
+  startup-frequency:
+    description: Factory set CPU startup frequency in HZ.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - startup-frequency
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80000000 {
+        compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
+        reg = <0x80000000 0xc000>;
+        #clock-cells = <1>;
+        startup-frequency = <73728000>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
index 59de125647ec..ccff74eda9fb 100644
--- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -67,9 +67,9 @@ properties:
     minItems: 1
     maxItems: 19
 
-  clocks: true
-  assigned-clocks: true
-  assigned-clock-parents: true
+  clocks:
+    minItems: 1
+    maxItems: 19
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index f2ea53832ac6..6fe541368889 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] https://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
deleted file mode 100644
index f1bd53f79d91..000000000000
--- a/Documentation/devicetree/bindings/clock/clps711x-clock.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Clock bindings for the Cirrus Logic CLPS711X CPUs
-
-Required properties:
-- compatible       : Shall contain "cirrus,ep7209-clk".
-- reg              : Address of the internal register set.
-- startup-frequency: Factory set CPU startup frequency in HZ.
-- #clock-cells     : Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
-for the full list of CLPS711X clock IDs.
-
-Example:
-	clks: clks@80000000 {
-		#clock-cells = <1>;
-		compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
-		reg = <0x80000000 0xc000>;
-		startup-frequency = <73728000>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
deleted file mode 100644
index 54e6df0bee8a..000000000000
--- a/Documentation/devicetree/bindings/clock/cs2000-cp.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
-
-Required properties:
-
-- compatible:		"cirrus,cs2000-cp"
-- reg:			The chip select number on the I2C bus
-- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
-- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
-- #clock-cells:		must be <0>
-
-Example:
-
-&i2c2 {
-	...
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&rcar_sound 0>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
deleted file mode 100644
index 217871f483c0..000000000000
--- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-PLL divider based Dove clocks
-
-Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
-high speed clocks for a number of peripherals.  These dividers are part of
-the PMU, and thus this node should be a child of the PMU node.
-
-The following clocks are provided:
-
-ID	Clock
--------------
-0	AXI bus clock
-1	GPU clock
-2	VMeta clock
-3	LCD clock
-
-Required properties:
-- compatible : shall be "marvell,dove-divider-clock"
-- reg : shall be the register address of the Core PLL and Clock Divider
-   Control 0 register.  This will cover that register, as well as the
-   Core PLL and Clock Divider Control 1 register.  Thus, it will have
-   a size of 8.
-- #clock-cells : from common clock binding; shall be set to 1
-
-divider_clk: core-clock@64 {
-	compatible = "marvell,dove-divider-clock";
-	reg = <0x0064 0x8>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
deleted file mode 100644
index 263d293f6a10..000000000000
--- a/Documentation/devicetree/bindings/clock/efm32-clock.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
-
-Required properties:
-- compatible: Should be "efm32gg,cmu"
-- reg: Base address and length of the register set
-- interrupts: Interrupt used by the CMU
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock ID in
-its "clocks" phandle cell. The header efm32-clk.h contains a list of available
-IDs.
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f66e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c30e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d6b..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f61..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
index b657ecd0ef1c..90fb10660684 100644
--- a/Documentation/devicetree/bindings/clock/fixed-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
@@ -4,13 +4,22 @@
 $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed-rate clock sources
+title: Simple fixed-rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          Preferred name is 'clock-<freq>' with <freq> being the output
+          frequency as defined in the 'clock-frequency' property.
+        pattern: "^clock-([0-9]+|[a-z0-9-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     const: fixed-clock
 
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index f415845b38dd..4afdb1c98f5f 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -4,16 +4,24 @@
 $id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed factor rate clock sources
+title: Simple fixed factor rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
   - Stephen Boyd <sboyd@kernel.org>
 
 properties:
+  $nodename:
+    anyOf:
+      - description:
+          If the frequency is fixed, the preferred name is 'clock-<freq>' with
+          <freq> being the output frequency.
+        pattern: "^clock-([0-9]+|[0-9a-z-]+)$"
+      - description: Any name allowed
+        deprecated: true
+
   compatible:
     enum:
-      - allwinner,sun4i-a10-pll3-2x-clk
       - fixed-factor-clock
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
index 1453ac849a65..e22fc272d023 100644
--- a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple memory mapped IO fixed-rate clock sources
+title: Simple memory mapped IO fixed-rate clock sources
 
 description:
   This binding describes a fixed-rate clock for which the frequency can
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
new file mode 100644
index 000000000000..07b9d21719c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 Audio Clock Mux
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8dxl-acm
+      - fsl,imx8qm-acm
+      - fsl,imx8qxp-acm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    minItems: 13
+    maxItems: 21
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h
+      for the full list of i.MX8 ACM clock IDs.
+
+  clocks:
+    minItems: 13
+    maxItems: 27
+
+  clock-names:
+    minItems: 13
+    maxItems: 27
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 18
+          maxItems: 18
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_ESAI_1
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SAI_6
+            - description: power domain of IMX_SC_R_SAI_7
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_SPDIF_1
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 27
+          maxItems: 27
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: mlb_clk
+            - const: hdmi_rx_mclk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: esai1_rx_clk
+            - const: esai1_rx_hf_clk
+            - const: esai1_tx_clk
+            - const: esai1_tx_hf_clk
+            - const: spdif0_rx
+            - const: spdif1_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+            - const: sai5_tx_bclk
+            - const: sai6_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8dxl-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 13
+          maxItems: 13
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    clock-controller@59e00000 {
+        compatible = "fsl,imx8qxp-acm";
+        reg = <0x59e00000 0x1d0000>;
+        #clock-cells = <1>;
+        power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+                        <&pd IMX_SC_R_AUDIO_CLK_1>,
+                        <&pd IMX_SC_R_MCLK_OUT_0>,
+                        <&pd IMX_SC_R_MCLK_OUT_1>,
+                        <&pd IMX_SC_R_AUDIO_PLL_0>,
+                        <&pd IMX_SC_R_AUDIO_PLL_1>,
+                        <&pd IMX_SC_R_ASRC_0>,
+                        <&pd IMX_SC_R_ASRC_1>,
+                        <&pd IMX_SC_R_ESAI_0>,
+                        <&pd IMX_SC_R_SAI_0>,
+                        <&pd IMX_SC_R_SAI_1>,
+                        <&pd IMX_SC_R_SAI_2>,
+                        <&pd IMX_SC_R_SAI_3>,
+                        <&pd IMX_SC_R_SAI_4>,
+                        <&pd IMX_SC_R_SAI_5>,
+                        <&pd IMX_SC_R_SPDIF_0>,
+                        <&pd IMX_SC_R_MQS_0>;
+        clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+                 <&clk_ext_aud_mclk0>,
+                 <&clk_ext_aud_mclk1>,
+                 <&clk_esai0_rx_clk>,
+                 <&clk_esai0_rx_hf_clk>,
+                 <&clk_esai0_tx_clk>,
+                 <&clk_esai0_tx_hf_clk>,
+                 <&clk_spdif0_rx>,
+                 <&clk_sai0_rx_bclk>,
+                 <&clk_sai0_tx_bclk>,
+                 <&clk_sai1_rx_bclk>,
+                 <&clk_sai1_tx_bclk>,
+                 <&clk_sai2_rx_bclk>,
+                 <&clk_sai3_rx_bclk>,
+                 <&clk_sai4_rx_bclk>;
+        clock-names = "aud_rec_clk0_lpcg_clk",
+                      "aud_rec_clk1_lpcg_clk",
+                      "aud_pll_div_clk0_lpcg_clk",
+                      "aud_pll_div_clk1_lpcg_clk",
+                      "ext_aud_mclk0",
+                      "ext_aud_mclk1",
+                      "esai0_rx_clk",
+                      "esai0_rx_hf_clk",
+                      "esai0_tx_clk",
+                      "esai0_tx_hf_clk",
+                      "spdif0_rx",
+                      "sai0_rx_bclk",
+                      "sai0_tx_bclk",
+                      "sai1_rx_bclk",
+                      "sai1_tx_bclk",
+                      "sai2_rx_bclk",
+                      "sai3_rx_bclk",
+                      "sai4_rx_bclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
new file mode 100644
index 000000000000..bbd22e95b319
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Anatop Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX8M Family anatop PLL module which generates PLL to CCM root.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-anatop
+          - fsl,imx8mq-anatop
+      - items:
+          - enum:
+              - fsl,imx8mn-anatop
+              - fsl,imx8mp-anatop
+          - const: fsl,imx8mm-anatop
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    anatop: clock-controller@30360000 {
+        compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+        reg = <0x30360000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml
new file mode 100644
index 000000000000..662e07528d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8ulp-sim-lpav.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP LPAV System Integration Module (SIM)
+
+maintainers:
+  - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
+
+description:
+  The i.MX8ULP LPAV subsystem contains a block control module known as
+  SIM LPAV, which offers functionalities such as clock gating or reset
+  line assertion/de-assertion.
+
+properties:
+  compatible:
+    const: fsl,imx8ulp-sim-lpav
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bus
+      - const: core
+      - const: plat
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8ulp-clock.h>
+
+    clock-controller@2da50000 {
+        compatible = "fsl,imx8ulp-sim-lpav";
+        reg = <0x2da50000 0x10000>;
+        clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>,
+                 <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>,
+                 <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>;
+        clock-names = "bus", "core", "plat";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        mux-controller {
+            compatible = "reg-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x8 0x00000200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml
new file mode 100644
index 000000000000..8a3b2476419a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx93-anatop.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx93-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 ANATOP Clock Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX93 ANATOP module which contains PLL and OSC to Clock Controller
+  Module.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-anatop
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@44480000 {
+        compatible = "fsl,imx93-anatop";
+        reg = <0x44480000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index 9ac716dfa602..88dd9c18db92 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock
 
 maintainers:
   - Wen He <wen.he_1@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml
new file mode 100644
index 000000000000..97b96a1a5825
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  These nodes are deprecated.  Kernels should continue to support
+  device trees with these nodes, but new device trees should not use them.
+
+  Most of the bindings are from the common clock binding[1].
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    enum:
+      - fsl,qoriq-core-pll-1.0
+      - fsl,qoriq-core-pll-2.0
+      - fsl,qoriq-core-mux-1.0
+      - fsl,qoriq-core-mux-2.0
+      - fsl,qoriq-sysclk-1.0
+      - fsl,qoriq-sysclk-2.0
+      - fsl,qoriq-platform-pll-1.0
+      - fsl,qoriq-platform-pll-2.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 8
+
+  '#clock-cells':
+    minimum: 0
+    maximum: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-sysclk-1.0
+              - fsl,qoriq-sysclk-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-core-pll-1.0
+              - fsl,qoriq-core-pll-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+          description: |
+            * 0 - equal to the PLL frequency
+            * 1 - equal to the PLL frequency divided by 2
+            * 2 - equal to the PLL frequency divided by 4
+
diff --git a/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml
new file mode 100644
index 000000000000..95a3e3b24267
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  Freescale QorIQ chips take primary clocking input from the external
+  SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+  multiple phase locked loops (PLL) to create a variety of frequencies
+  which can then be passed to a variety of internal logic, including
+  cores and peripheral IP blocks.
+  Please refer to the Reference Manual for details.
+
+  All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+  which the chip complies.
+
+  Chassis Version    Example Chips
+  ---------------    -------------
+       1.0          p4080, p5020, p5040
+       2.0          t4240
+
+  Clock Provider
+
+  The clockgen node should act as a clock provider, though in older device
+  trees the children of the clockgen node are the clock providers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,p2041-clockgen
+              - fsl,p3041-clockgen
+              - fsl,p4080-clockgen
+              - fsl,p5020-clockgen
+              - fsl,p5040-clockgen
+          - const: fsl,qoriq-clockgen-1.0
+      - items:
+          - enum:
+              - fsl,t1023-clockgen
+              - fsl,t1024-clockgen
+              - fsl,t1040-clockgen
+              - fsl,t1042-clockgen
+              - fsl,t2080-clockgen
+              - fsl,t2081-clockgen
+              - fsl,t4240-clockgen
+          - const: fsl,qoriq-clockgen-2.0
+      - items:
+          - enum:
+              - fsl,b4420-clockgen
+              - fsl,b4860-clockgen
+          - const: fsl,b4-clockgen
+      - items:
+          - enum:
+              - fsl,ls1012a-clockgen
+              - fsl,ls1021a-clockgen
+              - fsl,ls1028a-clockgen
+              - fsl,ls1043a-clockgen
+              - fsl,ls1046a-clockgen
+              - fsl,ls1088a-clockgen
+              - fsl,ls2080a-clockgen
+              - fsl,lx2160a-clockgen
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 2
+    description: |
+      The first cell of the clock specifier is the clock type, and the
+      second cell is the clock index for the specified type.
+
+        Type#  Name       Index Cell
+        0  sysclk          must be 0
+        1  cmux            index (n in CLKCnCSR)
+        2  hwaccel         index (n in CLKCGnHWACSR)
+        3  fman            0 for fm1, 1 for fm2
+        4  platform pll    n=pll/(n+1). For example, when n=1,
+                          that means output_freq=PLL_freq/2.
+        5  coreclk         must be 0
+
+  clock-frequency:
+    description: Input system clock frequency (SYSCLK)
+
+  clocks:
+    items:
+      - description:
+          sysclk may be provided as an input clock.  Either clock-frequency
+          or clocks must be provided.
+      - description:
+          A second input clock, called "coreclk", may be provided if
+          core PLLs are based on a different input clock from the
+          platform PLL.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: coreclk
+
+patternProperties:
+  '^mux[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^sysclk(-[a-z0-9]+)?$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^pll[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^platform\-pll@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* clock provider example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #clock-cells = <2>;
+    };
+
+  - |
+    /* Legacy example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        ranges = <0x0 0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #clock-cells = <2>;
+
+        sysclk: sysclk {
+            compatible = "fsl,qoriq-sysclk-1.0";
+            clock-output-names = "sysclk";
+            #clock-cells = <0>;
+        };
+
+        pll0: pll0@800 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x800 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll0", "pll0-div2";
+        };
+
+        pll1: pll1@820 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x820 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll1", "pll1-div2";
+        };
+
+        mux0: mux0@0 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x0 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux0";
+        };
+
+        mux1: mux1@20 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x20 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux1";
+        };
+
+        platform-pll@c00 {
+            #clock-cells = <1>;
+            reg = <0xc00 0x4>;
+            compatible = "fsl,qoriq-platform-pll-1.0";
+            clocks = <&sysclk>;
+            clock-output-names = "platform-pll", "platform-pll-div2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
index fc3bdfdc091a..3bca9d11c148 100644
--- a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale SAI bitclock-as-a-clock binding
+title: Freescale SAI bitclock-as-a-clock
 
 maintainers:
   - Michael Walle <michael@walle.cc>
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 000000000000..36d4cfc3c2f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml b/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml
new file mode 100644
index 000000000000..29ae5be51acf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,vf610-ccm.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,vf610-ccm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock for Freescale Vybrid VF610 SOC
+
+description:
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+  for the full list of VF610 clock IDs
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: external crystal oscillator 32KHz, recommended
+      - description: external crystal oscillator 24MHz, recommended
+      - description: audio
+      - description: enet
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: sxosc
+      - const: fxosc
+      - const: enet_ext
+      - const: audio_ext
+    minItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@4006b000 {
+        compatible = "fsl,vf610-ccm";
+        reg = <0x4006b000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&sxosc>, <&fxosc>;
+        clock-names = "sxosc", "fxosc";
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
deleted file mode 100644
index 332396265689..000000000000
--- a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Fujitsu CRG11 clock driver bindings
------------------------------------
-
-Required properties :
-- compatible : Shall contain "fujitsu,mb86s70-crg11"
-- #clock-cells : Shall be 3 {cntrlr domain port}
-
-The consumer specifies the desired clock pointing to its phandle.
-
-Example:
-
-	clock: crg11 {
-		compatible = "fujitsu,mb86s70-crg11";
-		#clock-cells = <3>;
-	};
-
-	mhu: mhu0@2b1f0000 {
-		#mbox-cells = <1>;
-		compatible = "arm,mhu";
-		reg = <0 0x2B1F0000 0x1000>;
-		interrupts = <0 36 4>, /* LP Non-Sec */
-			     <0 35 4>, /* HP Non-Sec */
-			     <0 37 4>; /* Secure */
-		clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
-		clock-names = "clk";
-	};
diff --git a/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml b/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml
new file mode 100644
index 000000000000..d3e0faf3c64d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gated-fixed-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gated-fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gated Fixed clock
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: gated-fixed-clock
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-output-names:
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      Contains a single GPIO specifier for the GPIO that enables and disables
+      the oscillator.
+    maxItems: 1
+
+  vdd-supply:
+    description: handle of the regulator that provides the supply voltage
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clock-frequency
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-1000000000 {
+      compatible = "gated-fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <1000000000>;
+      vdd-supply = <&reg_vdd>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
new file mode 100644
index 000000000000..31e106ef913d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  Google GS101 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that clock tree
+  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+  clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/gs101.h' header.
+
+properties:
+  compatible:
+    enum:
+      - google,gs101-cmu-top
+      - google,gs101-cmu-apm
+      - google,gs101-cmu-misc
+      - google,gs101-cmu-hsi0
+      - google,gs101-cmu-hsi2
+      - google,gs101-cmu-peric0
+      - google,gs101-cmu-peric1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-top
+              - google,gs101-cmu-apm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: HSI0 bus clock (from CMU_TOP)
+            - description: DPGTC (from CMU_TOP)
+            - description: USB DRD controller clock (from CMU_TOP)
+            - description: USB Display Port debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: dpgtc
+            - const: usb31drd
+            - const: usbdpdbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-hsi2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: High Speed Interface bus clock (from CMU_TOP)
+            - description: High Speed Interface pcie clock (from CMU_TOP)
+            - description: High Speed Interface ufs clock (from CMU_TOP)
+            - description: High Speed Interface mmc clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: pcie
+            - const: ufs
+            - const: mmc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-misc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Misc bus clock (from CMU_TOP)
+            - description: Misc sss clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: bus
+            - const: sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-peric0
+              - google,gs101-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: ip
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_TOP
+  - |
+    #include <dt-bindings/clock/google,gs101.h>
+
+    cmu_top: clock-controller@1e080000 {
+        compatible = "google,gs101-cmu-top";
+        reg = <0x1e080000 0x8000>;
+        #clock-cells = <1>;
+        clocks = <&ext_24_5m>;
+        clock-names = "oscclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
deleted file mode 100644
index d3379ff9b84b..000000000000
--- a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for simple gpio gated clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-gate-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- enable-gpios : GPIO reference for enabling and disabling the clock.
-
-Optional properties:
-- clocks: Maximum of one parent clock is supported.
-
-Example:
-	clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 000000000000..d09d0e3f0c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
deleted file mode 100644
index dad6269f52c5..000000000000
--- a/Documentation/devicetree/bindings/clock/hi3620-clock.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Hisilicon Hi3620 Clock Controller
-
-The Hi3620 clock controller generates and supplies clock to various
-controllers within the Hi3620 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
-  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
deleted file mode 100644
index 4733e58e491b..000000000000
--- a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Hisilicon Hix5hd2 Clock Controller
-
-The hix5hd2 clock controller generates and supplies clock to various
-controllers within the hix5hd2 SoC.
-
-Required Properties:
-
-- compatible: should be "hisilicon,hix5hd2-clock"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-
-All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
-
-Examples:
-	clock: clock@f8a22000 {
-		compatible = "hisilicon,hix5hd2-clock";
-		reg = <0xf8a22000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	uart0: uart@f8b00000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0xf8b00000 0x1000>;
-		interrupts = <0 49 4>;
-		clocks = <&clock HIX5HD2_FIXED_83M>;
-		clock-names = "apb_pclk";
-	};
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index ffd6ae0eed64..8b400da05fbe 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
 
 description: |
   The IDT VersaClock 5 and VersaClock 6 are programmable I2C
@@ -45,7 +45,7 @@ description: |
   The case where SH and SP are both 1 is likely not very interesting.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 properties:
   compatible:
@@ -54,8 +54,10 @@ properties:
       - idt,5p49v5925
       - idt,5p49v5933
       - idt,5p49v5935
+      - idt,5p49v60
       - idt,5p49v6901
       - idt,5p49v6965
+      - idt,5p49v6975
 
   reg:
     description: I2C device address
@@ -108,7 +110,7 @@ patternProperties:
     properties:
       idt,mode:
         description:
-          The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 6
@@ -124,8 +126,6 @@ required:
   - compatible
   - reg
   - '#clock-cells'
-  - idt,shutdown
-  - idt,output-enable-active
 
 allOf:
   - if:
@@ -134,6 +134,7 @@ allOf:
           enum:
             - idt,5p49v5933
             - idt,5p49v5935
+            - idt,5p49v6975
     then:
       # Devices with builtin crystal + optional external input
       properties:
@@ -151,7 +152,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/versaclock.h>
+    #include <dt-bindings/clock/versaclock.h>
 
     /* 25MHz reference crystal */
     ref25: ref25m {
@@ -191,11 +192,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml b/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml
new file mode 100644
index 000000000000..e70feee8e894
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/img,pistachio-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies Pistachio SoC clock controllers
+
+maintainers:
+  - Andrew Bresticker <abrestic@chromium.org>
+
+description: |
+  Pistachio has four clock controllers (core clock, peripheral clock, peripheral
+  general control, and top general control) which are instantiated individually
+  from the device-tree.
+
+  Core clock controller:
+
+  The core clock controller generates clocks for the CPU, RPU (WiFi + BT
+  co-processor), audio, and several peripherals.
+
+  Peripheral clock controller:
+
+  The peripheral clock controller generates clocks for the DDR, ROM, and other
+  peripherals. The peripheral system clock ("periph_sys") generated by the core
+  clock controller is the input clock to the peripheral clock controller.
+
+  Peripheral general control:
+
+  The peripheral general control block generates system interface clocks and
+  resets for various peripherals. It also contains miscellaneous peripheral
+  control registers.
+
+  Top-level general control:
+
+  The top-level general control block contains miscellaneous control registers
+  and gates for the external clocks "audio_clk_in" and "enet_clk_in".
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - img,pistachio-clk
+          - img,pistachio-clk-periph
+          - img,pistachio-cr-periph
+          - img,pistachio-cr-top
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,pistachio-clk
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External 52Mhz oscillator
+            - description: Alternate audio reference clock
+            - description: Alternate ethernet PHY clock
+
+        clock-names:
+          items:
+            - const: xtal
+            - const: audio_refclk_ext_gate
+            - const: ext_enet_in_gate
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,pistachio-clk-periph
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Peripheral system clock
+
+        clock-names:
+          items:
+            - const: periph_sys_core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,pistachio-cr-periph
+    then:
+      properties:
+        clocks:
+          items:
+            - description: System interface clock
+
+        clock-names:
+          items:
+            - const: sys
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,pistachio-cr-top
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External audio reference clock
+            - description: External ethernet PHY clock
+
+        clock-names:
+          items:
+            - const: audio_clk_in
+            - const: enet_clk_in
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
index f4833a29b79e..7ade4c32aff3 100644
--- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX1 CPUs
+title: Freescale i.MX1 CPUs Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
index 518ad9a4733c..79cc843703ec 100644
--- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX21
+title: Freescale i.MX21 Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 5e296a00e14f..5e71c9219500 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX23
+title: Freescale i.MX23 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
index 2a2b10778e72..c626a158590e 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX25
+title: Freescale i.MX25 Clock Controller
 
 maintainers:
   - Sascha Hauer <s.hauer@pengutronix.de>
@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index 160268f24487..71d78a0b551f 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX27
+title: Freescale i.MX27 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index f831b780f951..4aaad7b9c66e 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX28
+title: Freescale i.MX28 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index d2336261c922..50a8498eef8a 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX31
+title: Freescale i.MX31 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
index 3e20ccaf8131..c063369de3ec 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX35
+title: Freescale i.MX35 Clock Controller
 
 maintainers:
   - Steffen Trumtrar <s.trumtrar@pengutronix.de>
@@ -129,11 +129,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    mmc@53fb4000 {
-        compatible = "fsl,imx35-esdhc";
-        reg = <0x53fb4000 0x4000>;
-        interrupts = <7>;
-        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-        clock-names = "ipg", "ahb", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index b1740d7abe68..423c0142c1d3 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX5
+title: Freescale i.MX5 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
index 4f4637eddb8b..cd3c04c883df 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 Quad
+title: Freescale i.MX6 Quad Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
index b83c8f43d664..6713bbb14f30 100644
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloLite
+title: Freescale i.MX6 SoloLite Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
index 484894a4b23f..6d64cf9463c9 100644
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SLL
+title: Freescale i.MX6 SLL Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
index e6c795657c24..77afa4b81cf7 100644
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloX
+title: Freescale i.MX6 SoloX Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
index 6a51a3f51cd9..d57e18a210cc 100644
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 UltraLite
+title: Freescale i.MX6 UltraLite Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
index cefb61db01a8..880d602d09f4 100644
--- a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7 Dual
+title: Freescale i.MX7 Dual Clock Controller
 
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
-  - Anson Huang <Anson.Huang@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
index 7caf5cee9199..76842038f52e 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
+title: Freescale i.MX7ULP Peripheral Clock Control (PCC) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
@@ -108,14 +108,3 @@ examples:
                        "upll", "sosc_bus_clk", "firc_bus_clk",
                        "rosc", "spll_bus_clk";
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
index ee8efb4ed599..5e25bc6d1372 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
+title: Freescale i.MX7ULP System Clock Generation (SCG) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
@@ -86,14 +86,3 @@ examples:
                       "firc", "upll";
         #clock-cells = <1>;
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 625f573a7b90..4fec55832702 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8M Family Clock Control Module Binding
+title: NXP i.MX8M Family Clock Control Module
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 description: |
   NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
@@ -24,6 +25,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 2
+
   clocks:
     minItems: 6
     maxItems: 7
@@ -39,6 +43,13 @@ properties:
       ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
       for the full list of i.MX8M clock IDs.
 
+  fsl,operating-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [nominal, overdrive]
+    description:
+      The operating mode of the SoC. This affects the maximum clock rates that
+      can safely be configured by the clock controller.
+
 required:
   - compatible
   - reg
@@ -55,8 +66,6 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 7
-          maxItems: 7
           items:
             - description: 32k osc
             - description: 25m osc
@@ -66,8 +75,6 @@ allOf:
             - description: ext3 clock input
             - description: ext4 clock input
         clock-names:
-          minItems: 7
-          maxItems: 7
           items:
             - const: ckil
             - const: osc_25m
@@ -109,10 +116,11 @@ examples:
                  <&clk_ext3>, <&clk_ext4>;
         clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
                       "clk_ext3", "clk_ext4";
+        fsl,operating-mode = "nominal";
     };
 
   - |
-    clock-controller@30390000 {
+    clock-controller@30380000 {
         compatible = "fsl,imx8mq-ccm";
         reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
new file mode 100644
index 000000000000..0272c9527037
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP AudioMIX Block Control
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-audio-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: sai1
+      - const: sai2
+      - const: sai3
+      - const: sai5
+      - const: sai6
+      - const: sai7
+      - const: axi
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    clock-controller@30e20000 {
+        compatible = "fsl,imx8mp-audio-blk-ctrl";
+        reg = <0x30e20000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+                 <&clk IMX8MP_CLK_SAI1>,
+                 <&clk IMX8MP_CLK_SAI2>,
+                 <&clk IMX8MP_CLK_SAI3>,
+                 <&clk IMX8MP_CLK_SAI5>,
+                 <&clk IMX8MP_CLK_SAI6>,
+                 <&clk IMX8MP_CLK_SAI7>,
+                 <&clk IMX8MP_CLK_AUDIO_AXI_ROOT>;
+        clock-names = "ahb",
+                      "sai1", "sai2", "sai3",
+                      "sai5", "sai6", "sai7", "axi";
+        power-domains = <&pgc_audio>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 0f6fe365ebf3..b207f95361b2 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
 
 maintainers:
   - Aisheng Dong <aisheng.dong@nxp.com>
@@ -101,14 +101,3 @@ examples:
                              "sdhc0_lpcg_ahb_clk";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };
-
-    mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-        reg = <0x5b010000 0x10000>;
-        clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-        clock-names = "ipg", "ahb", "per";
-        power-domains = <&pd IMX_SC_R_SDHC_0>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
index 71f7186b135b..68a60cdc19af 100644
--- a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8ULP Clock Generation & Control(CGC) Module Binding
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module
 
 maintainers:
   - Jacky Bai <ping.bai@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
index 00612725bf8b..d0b0792fe7ba 100644
--- a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module Binding
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module
 
 maintainers:
   - Jacky Bai <ping.bai@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
new file mode 100644
index 000000000000..98c0800732ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx91-ccm
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 000000000000..777af4aad4b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT Clock Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index aa1df03ef4a6..509df06b9c9d 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs CGU devicetree bindings
+title: Ingenic SoCs CGU
 
 description: |
   The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
@@ -22,6 +22,7 @@ select:
         enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
@@ -51,6 +52,7 @@ properties:
       - enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
@@ -96,9 +98,9 @@ required:
 
 patternProperties:
   "^usb-phy@[a-f0-9]+$":
-    allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ]
+    $ref: /schemas/phy/ingenic,phy-usb.yaml#
   "^mac-phy-ctrl@[a-f0-9]+$":
-    allOf: [ $ref: "../net/ingenic,mac.yaml#" ]
+    $ref: /schemas/net/ingenic,mac.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
deleted file mode 100644
index 9f4ec5cb5c6b..000000000000
--- a/Documentation/devicetree/bindings/clock/intc_stratix10.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be
-	"intel,stratix10-clkmgr"
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-
-- #clock-cells : from common clock binding, shall be set to 1.
-
-Example:
-	clkmgr: clock-controller@ffd10000 {
-		compatible = "intel,stratix10-clkmgr";
-		reg = <0xffd10000 0x1000>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
index cf5a9eb803e6..3745ba8dbd76 100644
--- a/Documentation/devicetree/bindings/clock/intel,agilex.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA Agilex platform clock controller binding
+title: Intel SoCFPGA Agilex platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml
new file mode 100644
index 000000000000..d120b0da7f3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex5-clkmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex5 clock manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex5 Clock Manager is an integrated clock controller, which
+  generates and supplies clock to all the modules.
+
+properties:
+  compatible:
+    const: intel,agilex5-clkmgr
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clkmgr: clock-controller@10d10000 {
+      compatible = "intel,agilex5-clkmgr";
+      reg = <0x10d10000 0x1000>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
index f3e1a700a2ca..76609a390429 100644
--- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding
+title: Intel Lightning Mountain SoC's Clock Controller(CGU)
 
 maintainers:
   - Rahul Tanwar <rahul.tanwar@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
index 8f45976e946e..e000116a51a4 100644
--- a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA eASIC N5X platform clock controller binding
+title: Intel SoCFPGA eASIC N5X platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
new file mode 100644
index 000000000000..b4a8be213400
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt
index c5aa187026e3..43f6fb6c9392 100644
--- a/Documentation/devicetree/bindings/clock/keystone-gate.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for Keystone gate control driver which uses PSC controller IP.
 
 This binding uses the common clock binding[1].
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
index 47570d207215..69b0eb7c03c9 100644
--- a/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
 and PAPLL are controlled by the memory mapped register where as the Main
@@ -14,7 +12,7 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
 - clocks : parent clock phandle
-- reg - pll control0 and pll multipler registers
+- reg - pll control0 and pll multiplier registers
 - reg-names : control, multiplier and post-divider. The multiplier and
 		post-divider registers are applicable only for main pll clock
 - fixed-postdiv : fixed post divider value. If absent, use clkod register bits
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
new file mode 100644
index 000000000000..01561a0f35d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls1x-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Clock Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-clk
+      - loongson,ls1c-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc: clock-controller@1fe78030 {
+        compatible = "loongson,ls1b-clk";
+        reg = <0x1fe78030 0x8>;
+
+        clocks = <&xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
new file mode 100644
index 000000000000..c07ad1f85857
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k0300-clk
+      - loongson,ls2k0500-clk
+      - loongson,ls2k-clk  # This is for Loongson-2K1000
+      - loongson,ls2k2000-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_100m
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+      for the full list of Loongson-2 SoC clock IDs.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: loongson,ls2k0300-clk
+    then:
+      properties:
+        clock-names: false
+    else:
+      required:
+        - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ref_100m: clock-ref-100m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <100000000>;
+        clock-output-names = "ref_100m";
+    };
+
+    clk: clock-controller@1fe00480 {
+        compatible = "loongson,ls2k-clk";
+        reg = <0x1fe00480 0x58>;
+        #clock-cells = <1>;
+        clocks = <&ref_100m>;
+        clock-names = "ref_100m";
+    };
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
deleted file mode 100644
index fa97c12014ac..000000000000
--- a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* NXP LPC1850 Clock Control Unit (CCU)
-
-Each CGU base clock has several clock branches which can be turned on
-or off independently by the Clock Control Units CCU1 or CCU2. The
-branch clocks are distributed between CCU1 and CCU2.
-
- - Above text taken from NXP LPC1850 User Manual.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
-	Should be "nxp,lpc1850-ccu"
-- reg:
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells:
-	Shall have value <1>.  The permitted clock-specifier values
-	are the branch clock names defined in table below.
-- clocks:
-	Shall contain a list of phandles for the base clocks routed
-	from the CGU to the specific CCU. See mapping of base clocks
-	and CCU in table below.
-- clock-names:
-	Shall contain a list of names for the base clock routed
-	from the CGU to the specific CCU. Valid CCU clock names:
-	"base_usb0_clk",  "base_periph_clk", "base_usb1_clk",
-	"base_cpu_clk",   "base_spifi_clk",  "base_spi_clk",
-	"base_apb1_clk",  "base_apb3_clk",   "base_adchs_clk",
-	"base_sdio_clk",  "base_ssp0_clk",   "base_ssp1_clk",
-	"base_uart0_clk", "base_uart1_clk",  "base_uart2_clk",
-	"base_uart3_clk", "base_audio_clk"
-
-Which branch clocks that are available on the CCU depends on the
-specific LPC part. Check the user manual for your specific part.
-
-A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
-
-Example board file:
-
-soc {
-	ccu1: clock-controller@40051000 {
-		compatible = "nxp,lpc1850-ccu";
-		reg = <0x40051000 0x1000>;
-		#clock-cells = <1>;
-		clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
-			 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
-			 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
-			 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
-		clock-names = "base_apb3_clk",   "base_apb1_clk",
-			      "base_spifi_clk",  "base_cpu_clk",
-			      "base_periph_clk", "base_usb0_clk",
-			      "base_usb1_clk",   "base_spi_clk";
-	};
-
-	ccu2: clock-controller@40052000 {
-		compatible = "nxp,lpc1850-ccu";
-		reg = <0x40052000 0x1000>;
-		#clock-cells = <1>;
-		clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
-			 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
-			 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
-			 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
-		clock-names = "base_audio_clk", "base_uart3_clk",
-			      "base_uart2_clk", "base_uart1_clk",
-			      "base_uart0_clk", "base_ssp1_clk",
-			      "base_ssp0_clk",  "base_sdio_clk";
-	};
-
-	/* A user of CCU brach clocks */
-	uart1: serial@40082000 {
-		...
-		clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
deleted file mode 100644
index 2cc32a9a945a..000000000000
--- a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-* NXP LPC1850 Clock Generation Unit (CGU)
-
-The CGU generates multiple independent clocks for the core and the
-peripheral blocks of the LPC18xx. Each independent clock is called
-a base clock and itself is one of the inputs to the two Clock
-Control Units (CCUs) which control the branch clocks to the
-individual peripherals.
-
-The CGU selects the inputs to the clock generators from multiple
-clock sources, controls the clock generation, and routes the outputs
-of the clock generators through the clock source bus to the output
-stages. Each output stage provides an independent clock source and
-corresponds to one of the base clocks for the LPC18xx.
-
- - Above text taken from NXP LPC1850 User Manual.
-
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
-	Should be "nxp,lpc1850-cgu"
-- reg:
-	Shall define the base and range of the address space
-	containing clock control registers
-- #clock-cells:
-	Shall have value <1>.  The permitted clock-specifier values
-	are the base clock numbers defined below.
-- clocks:
-	Shall contain a list of phandles for the external input
-	sources to the CGU. The list shall be in the following
-	order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
-- clock-indices:
-	Shall be an ordered list of numbers defining the base clock
-	number provided by the CGU.
-- clock-output-names:
-	Shall be an ordered list of strings defining the names of
-	the clocks provided by the CGU.
-
-Which base clocks that are available on the CGU depends on the
-specific LPC part. Base clocks are numbered from 0 to 27.
-
-Number:		Name:			Description:
- 0		BASE_SAFE_CLK		Base safe clock (always on) for WWDT
- 1		BASE_USB0_CLK		Base clock for USB0
- 2		BASE_PERIPH_CLK		Base clock for Cortex-M0SUB subsystem,
-					SPI, and SGPIO
- 3		BASE_USB1_CLK		Base clock for USB1
- 4		BASE_CPU_CLK		System base clock for ARM Cortex-M core
-					and APB peripheral blocks #0 and #2
- 5		BASE_SPIFI_CLK		Base clock for SPIFI
- 6		BASE_SPI_CLK		Base clock for SPI
- 7		BASE_PHY_RX_CLK		Base clock for Ethernet PHY Receive clock
- 8		BASE_PHY_TX_CLK		Base clock for Ethernet PHY Transmit clock
- 9		BASE_APB1_CLK		Base clock for APB peripheral block # 1
-10		BASE_APB3_CLK		Base clock for APB peripheral block # 3
-11		BASE_LCD_CLK		Base clock for LCD
-12		BASE_ADCHS_CLK		Base clock for ADCHS
-13		BASE_SDIO_CLK		Base clock for SD/MMC
-14		BASE_SSP0_CLK		Base clock for SSP0
-15		BASE_SSP1_CLK		Base clock for SSP1
-16		BASE_UART0_CLK		Base clock for UART0
-17		BASE_UART1_CLK		Base clock for UART1
-18		BASE_UART2_CLK		Base clock for UART2
-19		BASE_UART3_CLK		Base clock for UART3
-20		BASE_OUT_CLK		Base clock for CLKOUT pin
-24-21		-			Reserved
-25		BASE_AUDIO_CLK		Base clock for audio system (I2S)
-26 		BASE_CGU_OUT0_CLK	Base clock for CGU_OUT0 clock output
-27 		BASE_CGU_OUT1_CLK	Base clock for CGU_OUT1 clock output
-
-BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
-BASE_ADCHS_CLK is only available on LPC4370.
-
-
-Example board file:
-
-/ {
-	clocks {
-		xtal: xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		xtal32: xtal32 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		enet_rx_clk: enet_rx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_rx_clk";
-		};
-
-		enet_tx_clk: enet_tx_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "enet_tx_clk";
-		};
-
-		gp_clkin: gp_clkin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "gp_clkin";
-		};
-	};
-
-	soc {
-		cgu: clock-controller@40050000 {
-			compatible = "nxp,lpc1850-cgu";
-			reg = <0x40050000 0x1000>;
-			#clock-cells = <1>;
-			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
-		};
-
-		/* A CGU and CCU clock consumer */
-		lcdc: lcdc@40008000 {
-			...
-			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
-			clock-names = "clcdclk", "apb_pclk";
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
deleted file mode 100644
index 6f1c7b4e4d2c..000000000000
--- a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* NXP LPC1850 CREG clocks
-
-The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
-control registers for two low speed clocks. One of the clocks is a
-32 kHz oscillator driver with power up/down and clock gating. Next
-is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
-
-These clocks are used by the RTC and the Event Router peripherials.
-The 32 kHz can also be routed to other peripherials to enable low
-power modes.
-
-This binding uses the common clock binding:
-    Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
-	Should be "nxp,lpc1850-creg-clk"
-- #clock-cells:
-	Shall have value <1>.
-- clocks:
-	Shall contain a phandle to the fixed 32 kHz crystal.
-
-The creg-clk node must be a child of the creg syscon node.
-
-The following clocks are available from the clock node.
-
-Clock ID	Name
-   0		 1 kHz clock
-   1		32 kHz Oscillator
-
-Example:
-soc {
-	creg: syscon@40043000 {
-		compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
-		reg = <0x40043000 0x1000>;
-
-		creg_clk: clock-controller {
-			compatible = "nxp,lpc1850-creg-clk";
-			clocks = <&xtal32>;
-			#clock-cells = <1>;
-		};
-
-		...
-	};
-
-	rtc: rtc@40046000 {
-		...
-		clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
-		clock-names = "rtc", "reg";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
deleted file mode 100644
index 3ce97cfe999b..000000000000
--- a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-AXM5516 clock driver bindings
------------------------------
-
-Required properties :
-- compatible : shall contain "lsi,axm5516-clks"
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-
-The consumer specifies the desired clock by having the clock ID in its "clocks"
-phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
-supported clock IDs.
-
-Example:
-
-	clks: clock-controller@2010020000 {
-		compatible = "lsi,axm5516-clks";
-		#clock-cells = <1>;
-		reg = <0x20 0x10020000 0 0x20000>;
-	};
-
-	serial0: uart@2010080000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x20 0x10080000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks AXXIA_CLK_PER>;
-		clock-names = "apb_pclk";
-	};
-																																};
-
diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml
new file mode 100644
index 000000000000..7a792dbeffb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 LSI
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/lsi,axm5516-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LSI AXM5516 Clock Controller
+
+maintainers:
+  - Anders Berg <anders.berg@lsi.com>
+
+description:
+  See <dt-bindings/clock/lsi,axxia-clock.h> for the list of supported clock IDs.
+
+properties:
+  compatible:
+    const: lsi,axm5516-clks
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        clock-controller@2010020000 {
+            compatible = "lsi,axm5516-clks";
+            #clock-cells = <1>;
+            reg = <0x20 0x10020000 0x20000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml b/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml
new file mode 100644
index 000000000000..52c217d210d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/lsi,nspire-cx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Clocks
+
+maintainers:
+  - Daniel Tang <dt.tangr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - lsi,nspire-cx-ahb-divider
+      - lsi,nspire-classic-ahb-divider
+      - lsi,nspire-cx-clock
+      - lsi,nspire-classic-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
diff --git a/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml
new file mode 100644
index 000000000000..43b0631ba167
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,ap80x-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada AP80x System Controller Clocks
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
+  7K/8K/931x SoCs. It contains system controllers, which provide several
+  registers giving access to numerous features: clocks, pin-muxing and many
+  other SoC configuration items.
+
+properties:
+  compatible:
+    enum:
+      - marvell,ap806-clock
+      - marvell,ap806-cpu-clock
+      - marvell,ap807-clock
+      - marvell,ap807-cpu-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: cluster 0 parent clock phandle
+      - description: cluster 1 parent clock phandle
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,ap806-cpu-clock
+              - marvell,ap807-cpu-clock
+    then:
+      required:
+        - clocks
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml
new file mode 100644
index 000000000000..9d766558cdb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/marvell,armada-370-corediv-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU Core Divider Clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-370-corediv-clock
+          - marvell,armada-375-corediv-clock
+          - marvell,armada-380-corediv-clock
+          - marvell,mv98dx3236-corediv-clock
+      - items:
+          - const: marvell,armada-390-corediv-clock
+          - const: marvell,armada-380-corediv-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@18740 {
+        compatible = "marvell,armada-370-corediv-clock";
+        reg = <0x18740 0xc>;
+        #clock-cells = <1>;
+        clocks = <&pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml
new file mode 100644
index 000000000000..87e8e4ca111a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-periph-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx SoCs Peripheral Clocks
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+  Marvell Armada 37xx SoCs provide peripheral clocks which are used as clock
+  source for the peripheral of the SoC.
+
+  There are two different blocks associated to north bridge and south bridge.
+
+  The following is a list of provided IDs for Armada 3700 North bridge clocks:
+
+    ID	Clock name	Description
+    -----------------------------------
+    0	mmc		MMC controller
+    1	sata_host	Sata Host
+    2	sec_at		Security AT
+    3	sac_dap		Security DAP
+    4	tsecm		Security Engine
+    5	setm_tmx	Serial Embedded Trace Module
+    6	avs		Adaptive Voltage Scaling
+    7	sqf		SPI
+    8	pwm		PWM
+    9	i2c_2		I2C 2
+    10	i2c_1		I2C 1
+    11	ddr_phy		DDR PHY
+    12	ddr_fclk	DDR F clock
+    13	trace		Trace
+    14	counter		Counter
+    15	eip97		EIP 97
+    16	cpu		CPU
+
+  The following is a list of provided IDs for Armada 3700 South bridge clocks:
+
+    ID	Clock name	Description
+    -----------------------------------
+    0	gbe-50		50 MHz parent clock for Gigabit Ethernet
+    1	gbe-core	parent clock for Gigabit Ethernet core
+    2	gbe-125		125 MHz parent clock for Gigabit Ethernet
+    3	gbe1-50		50 MHz clock for Gigabit Ethernet port 1
+    4	gbe0-50		50 MHz clock for Gigabit Ethernet port 0
+    5	gbe1-125	125 MHz clock for Gigabit Ethernet port 1
+    6	gbe0-125	125 MHz clock for Gigabit Ethernet port 0
+    7	gbe1-core	Gigabit Ethernet core port 1
+    8	gbe0-core	Gigabit Ethernet core port 0
+    9	gbe-bm		Gigabit Ethernet Buffer Manager
+    10	sdio		SDIO
+    11	usb32-sub2-sys	USB 2 clock
+    12	usb32-ss-sys	USB 3 clock
+    13	pcie		PCIe controller
+
+properties:
+  compatible:
+    oneOf:
+      - const: marvell,armada-3700-periph-clock-sb
+      - items:
+          - const: marvell,armada-3700-periph-clock-nb
+          - const: syscon
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: TBG-A P clock and specifier
+      - description: TBG-B P clock and specifier
+      - description: TBG-A S clock and specifier
+      - description: TBG-B S clock and specifier
+      - description: Xtal clock and specifier
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13000{
+        compatible = "marvell,armada-3700-periph-clock-sb";
+        reg = <0x13000 0x1000>;
+        clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml
new file mode 100644
index 000000000000..7fd1d758f794
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-tbg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 Time Base Generator Clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+  Marvell Armada 37xx SoCs provide Time Base Generator clocks which are used as
+  parent clocks for the peripheral clocks.
+
+  The TBG clock consumer should specify the desired clock by having the clock ID
+  in its "clocks" phandle cell.
+
+  The following is a list of provided IDs and clock names on Armada 3700:
+
+    0 = TBG A P
+    1 = TBG B P
+    2 = TBG A S
+    3 = TBG B S
+
+properties:
+  compatible:
+    const: marvell,armada-3700-tbg-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13200 {
+        compatible = "marvell,armada-3700-tbg-clock";
+        reg = <0x13200 0x1000>;
+        clocks = <&xtalclk>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml
new file mode 100644
index 000000000000..f2ac6741da9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+$id: http://devicetree.org/schemas/clock/marvell,armada-xp-cpu-clock.yaml#
+
+title: Marvell EBU CPU Clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-xp-cpu-clock
+      - marvell,mv98dx3236-cpu-clock
+
+  reg:
+    items:
+      - description: Clock complex registers
+      - description: PMU DFS registers
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d0018700 {
+        #clock-cells = <1>;
+        compatible = "marvell,armada-xp-cpu-clock";
+        reg = <0xd0018700 0xa0>, <0x1c054 0x10>;
+        clocks = <&coreclk 1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt
deleted file mode 100644
index c611c495f3ff..000000000000
--- a/Documentation/devicetree/bindings/clock/marvell,berlin.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Device Tree Clock bindings for Marvell Berlin
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Clock related registers are spread among the chip control registers. Berlin
-clock node should be a sub-node of the chip controller node. Marvell Berlin2
-(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
-minor differences in features and register layout.
-
-Required properties:
-- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
-- #clock-cells: must be 1
-- clocks: must be the input parent clock phandle
-- clock-names: name of the input parent clock
-	Allowed clock-names for the reference clocks are
-	"refclk" for the SoCs oscillator input on all SoCs,
-	and SoC-specific input clocks for
-	BG2/BG2CD: "video_ext0" for the external video clock input
-
-
-Example:
-
-chip_clk: clock {
-	compatible = "marvell,berlin2q-clk";
-
-	#clock-cells = <1>;
-	clocks = <&refclk>;
-	clock-names = "refclk";
-};
diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml b/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml
new file mode 100644
index 000000000000..8d48a2c7e381
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,berlin2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin Clock Controller
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+  Clock related registers are spread among the chip control registers. Berlin
+  clock node should be a sub-node of the chip controller node. Marvell Berlin2
+  (BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some minor
+  differences in features and register layout.
+
+properties:
+  compatible:
+    enum:
+      - marvell,berlin2-clk
+      - marvell,berlin2q-clk
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - enum:
+          - refclk
+          - video_ext0
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "marvell,berlin2q-clk";
+        #clock-cells = <1>;
+        clocks = <&refclk>;
+        clock-names = "refclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml
new file mode 100644
index 000000000000..ad0bc79b24c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,cp110-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada CP110 System Controller Clocks
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K/931x
+  SoCs. It contains system controllers, which provide several registers giving
+  access to numerous features: clocks, pin-muxing and many other SoC
+  configuration items.
+
+properties:
+  compatible:
+    const: marvell,cp110-clock
+
+  "#clock-cells":
+    const: 2
+    description: >
+      The first cell must be 0 or 1. 0 for the core clocks and 1 for the
+      gateable clocks. The second cell identifies the particular core clock or
+      gateable clocks.
+
+      The following clocks are available:
+
+        - Core clocks
+          - 0 0       APLL
+          - 0 1       PPv2 core
+          - 0 2       EIP
+          - 0 3       Core
+          - 0 4       NAND core
+          - 0 5       SDIO core
+
+        - Gateable clocks
+          - 1 0       Audio
+          - 1 1       Comm Unit
+          - 1 2       NAND
+          - 1 3       PPv2
+          - 1 4       SDIO
+          - 1 5       MG Domain
+          - 1 6       MG Core
+          - 1 7       XOR1
+          - 1 8       XOR0
+          - 1 9       GOP DP
+          - 1 11      PCIe x1 0
+          - 1 12      PCIe x1 1
+          - 1 13      PCIe x4
+          - 1 14      PCIe / XOR
+          - 1 15      SATA
+          - 1 16      SATA USB
+          - 1 17      Main
+          - 1 18      SD/MMC/GOP
+          - 1 21      Slow IO (SPI, NOR, BootROM, I2C, UART)
+          - 1 22      USB3H0
+          - 1 23      USB3H1
+          - 1 24      USB3 Device
+          - 1 25      EIP150
+          - 1 26      EIP197
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml
new file mode 100644
index 000000000000..7a8e0e281b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/marvell,dove-divider-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Dove PLL Divider Clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+  Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+  high speed clocks for a number of peripherals.  These dividers are part of the
+  PMU, and thus this node should be a child of the PMU node.
+
+  The following clocks are provided:
+
+    ID	Clock
+    -------------
+    0	AXI bus clock
+    1	GPU clock
+    2	VMeta clock
+    3	LCD clock
+
+properties:
+  compatible:
+    const: marvell,dove-divider-clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@64 {
+        compatible = "marvell,dove-divider-clock";
+        reg = <0x0064 0x8>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml
new file mode 100644
index 000000000000..215bcd9080c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mvebu-core-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU SoC core clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+  Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+  reading the Sample-At-Reset (SAR) register. The core clock consumer should
+  specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+  The following is a list of provided IDs and clock names on Armada 370/XP:
+   0 = tclk    (Internal Bus clock)
+   1 = cpuclk  (CPU clock)
+   2 = nbclk   (L2 Cache clock)
+   3 = hclk    (DRAM control clock)
+   4 = dramclk (DDR clock)
+
+  The following is a list of provided IDs and clock names on Armada 375:
+   0 = tclk    (Internal Bus clock)
+   1 = cpuclk  (CPU clock)
+   2 = l2clk   (L2 Cache clock)
+   3 = ddrclk  (DDR clock)
+
+  The following is a list of provided IDs and clock names on Armada 380/385:
+   0 = tclk    (Internal Bus clock)
+   1 = cpuclk  (CPU clock)
+   2 = l2clk   (L2 Cache clock)
+   3 = ddrclk  (DDR clock)
+
+  The following is a list of provided IDs and clock names on Armada 39x:
+   0 = tclk    (Internal Bus clock)
+   1 = cpuclk  (CPU clock)
+   2 = nbclk   (Coherent Fabric clock)
+   3 = hclk    (SDRAM Controller Internal Clock)
+   4 = dclk    (SDRAM Interface Clock)
+   5 = refclk  (Reference Clock)
+
+  The following is a list of provided IDs and clock names on 98dx3236:
+   0 = tclk    (Internal Bus clock)
+   1 = cpuclk  (CPU clock)
+   2 = ddrclk  (DDR clock)
+   3 = mpll    (MPLL Clock)
+
+  The following is a list of provided IDs and clock names on Kirkwood and Dove:
+   0 = tclk   (Internal Bus clock)
+   1 = cpuclk (CPU0 clock)
+   2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+   3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+  The following is a list of provided IDs and clock names on Orion5x:
+   0 = tclk   (Internal Bus clock)
+   1 = cpuclk (CPU0 clock)
+   2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-370-core-clock
+      - marvell,armada-375-core-clock
+      - marvell,armada-380-core-clock
+      - marvell,armada-390-core-clock
+      - marvell,armada-xp-core-clock
+      - marvell,dove-core-clock
+      - marvell,kirkwood-core-clock
+      - marvell,mv88f5181-core-clock
+      - marvell,mv88f5182-core-clock
+      - marvell,mv88f5281-core-clock
+      - marvell,mv88f6180-core-clock
+      - marvell,mv88f6183-core-clock
+      - marvell,mv98dx1135-core-clock
+      - marvell,mv98dx3236-core-clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names:
+    description: Overwrite default clock output names.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..6f3a8578fe2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,pxa1908-apbc
+          - marvell,pxa1908-apbcp
+          - marvell,pxa1908-mpmu
+      - items:
+          - const: marvell,pxa1908-apmu
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: marvell,pxa1908-apmu
+
+then:
+  properties:
+    '#power-domain-cells': false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu", "syscon";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml b/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml
new file mode 100644
index 000000000000..0475360d2b6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/clock/marvell-armada-370-gating-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU SoC gating-clock
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+  Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral
+  clocks to be gated to save some power. The clock ID is directly mapped to the
+  corresponding clock gating control bit in HW to ease manual clock lookup in
+  datasheet.
+
+  The following is a list of provided IDs for Armada 370:
+
+    ID    Clock    Peripheral
+    -----------------------------------
+    0     Audio    AC97 Cntrl
+    1     pex0_en  PCIe 0 Clock out
+    2     pex1_en  PCIe 1 Clock out
+    3     ge1      Gigabit Ethernet 1
+    4     ge0      Gigabit Ethernet 0
+    5     pex0     PCIe Cntrl 0
+    9     pex1     PCIe Cntrl 1
+    15    sata0    SATA Host 0
+    17    sdio     SDHCI Host
+    23    crypto   CESA (crypto engine)
+    25    tdm      Time Division Mplx
+    28    ddr      DDR Cntrl
+    30    sata1   SATA Host 0
+
+  The following is a list of provided IDs for Armada 375:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    2     mu              Management Unit
+    3     pp              Packet Processor
+    4     ptp             PTP
+    5     pex0            PCIe 0 Clock out
+    6     pex1            PCIe 1 Clock out
+    8     audio           Audio Cntrl
+    11    nd_clk          Nand Flash Cntrl
+    14    sata0_link      SATA 0 Link
+    15    sata0_core      SATA 0 Core
+    16    usb3            USB3 Host
+    17    sdio            SDHCI Host
+    18    usb             USB Host
+    19    gop             Gigabit Ethernet MAC
+    20    sata1_link      SATA 1 Link
+    21    sata1_core      SATA 1 Core
+    22    xor0            XOR DMA 0
+    23    xor1            XOR DMA 0
+    24    copro           Coprocessor
+    25    tdm             Time Division Mplx
+    28    crypto0_enc     Cryptographic Unit Port 0 Encryption
+    29    crypto0_core    Cryptographic Unit Port 0 Core
+    30    crypto1_enc     Cryptographic Unit Port 1 Encryption
+    31    crypto1_core    Cryptographic Unit Port 1 Core
+
+  The following is a list of provided IDs for Armada 380/385:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    0     audio           Audio
+    2     ge2             Gigabit Ethernet 2
+    3     ge1             Gigabit Ethernet 1
+    4     ge0             Gigabit Ethernet 0
+    5     pex1            PCIe 1
+    6     pex2            PCIe 2
+    7     pex3            PCIe 3
+    8     pex0            PCIe 0
+    9     usb3h0          USB3 Host 0
+    10    usb3h1          USB3 Host 1
+    11    usb3d           USB3 Device
+    13    bm              Buffer Management
+    14    crypto0z        Cryptographic 0 Z
+    15    sata0           SATA 0
+    16    crypto1z        Cryptographic 1 Z
+    17    sdio            SDIO
+    18    usb2            USB 2
+    21    crypto1         Cryptographic 1
+    22    xor0            XOR 0
+    23    crypto0         Cryptographic 0
+    25    tdm             Time Division Multiplexing
+    28    xor1            XOR 1
+    30    sata1           SATA 1
+
+  The following is a list of provided IDs for Armada 39x:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    5     pex1            PCIe 1
+    6     pex2            PCIe 2
+    7     pex3            PCIe 3
+    8     pex0            PCIe 0
+    9     usb3h0          USB3 Host 0
+    10    usb3h1          USB3 Host 1
+    15    sata0           SATA 0
+    17    sdio            SDIO
+    22    xor0            XOR 0
+    28    xor1            XOR 1
+
+  The following is a list of provided IDs for Armada XP:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    0     audio           Audio Cntrl
+    1     ge3             Gigabit Ethernet 3
+    2     ge2             Gigabit Ethernet 2
+    3     ge1             Gigabit Ethernet 1
+    4     ge0             Gigabit Ethernet 0
+    5     pex0            PCIe Cntrl 0
+    6     pex1            PCIe Cntrl 1
+    7     pex2            PCIe Cntrl 2
+    8     pex3            PCIe Cntrl 3
+    13    bp
+    14    sata0lnk
+    15    sata0           SATA Host 0
+    16    lcd             LCD Cntrl
+    17    sdio            SDHCI Host
+    18    usb0            USB Host 0
+    19    usb1            USB Host 1
+    20    usb2            USB Host 2
+    22    xor0            XOR DMA 0
+    23    crypto          CESA engine
+    25    tdm             Time Division Mplx
+    28    xor1            XOR DMA 1
+    29    sata1lnk
+    30    sata1           SATA Host 1
+
+  The following is a list of provided IDs for 98dx3236:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    3     ge1             Gigabit Ethernet 1
+    4     ge0             Gigabit Ethernet 0
+    5     pex0            PCIe Cntrl 0
+    17    sdio            SDHCI Host
+    18    usb0            USB Host 0
+    22    xor0            XOR DMA 0
+
+  The following is a list of provided IDs for Dove:
+
+  ID    Clock           Peripheral
+  -----------------------------------
+    0     usb0            USB Host 0
+    1     usb1            USB Host 1
+    2     ge              Gigabit Ethernet
+    3     sata            SATA Host
+    4     pex0            PCIe Cntrl 0
+    5     pex1            PCIe Cntrl 1
+    8     sdio0           SDHCI Host 0
+    9     sdio1           SDHCI Host 1
+    10    nand            NAND Cntrl
+    11    camera          Camera Cntrl
+    12    i2s0            I2S Cntrl 0
+    13    i2s1            I2S Cntrl 1
+    15    crypto          CESA engine
+    21    ac97            AC97 Cntrl
+    22    pdma            Peripheral DMA
+    23    xor0            XOR DMA 0
+    24    xor1            XOR DMA 1
+    30    gephy           Gigabit Ethernet PHY
+    Note: gephy(30) is implemented as a parent clock of ge(2)
+
+  The following is a list of provided IDs for Kirkwood:
+
+    ID    Clock           Peripheral
+    -----------------------------------
+    0     ge0             Gigabit Ethernet 0
+    2     pex0            PCIe Cntrl 0
+    3     usb0            USB Host 0
+    4     sdio            SDIO Cntrl
+    5     tsu             Transp. Stream Unit
+    6     dunit           SDRAM Cntrl
+    7     runit           Runit
+    8     xor0            XOR DMA 0
+    9     audio           I2S Cntrl 0
+    14    sata0           SATA Host 0
+    15    sata1           SATA Host 1
+    16    xor1            XOR DMA 1
+    17    crypto          CESA engine
+    18    pex1            PCIe Cntrl 1
+    19    ge1             Gigabit Ethernet 1
+    20    tdm             Time Division Mplx
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-370-gating-clock
+      - marvell,armada-375-gating-clock
+      - marvell,armada-380-gating-clock
+      - marvell,armada-390-gating-clock
+      - marvell,armada-xp-gating-clock
+      - marvell,mv98dx3236-gating-clock
+      - marvell,dove-gating-clock
+      - marvell,kirkwood-gating-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d0038 {
+        compatible = "marvell,dove-gating-clock";
+        reg = <0xd0038 0x4>;
+        /* default parent clock is tclk */
+        clocks = <&core_clk 0>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
deleted file mode 100644
index c10849efb444..000000000000
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
-
-This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
-multi-function device. More information can be found in MFD DT binding
-doc as follows:
-	bindings/mfd/max77686.txt for MAX77686 and
-	bindings/mfd/max77802.txt for MAX77802 and
-	bindings/mfd/max77620.txt for MAX77620.
-
-The MAX77686 contains three 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77686.h.
-
-
-The MAX77802 contains two 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77802.h.
-
-The MAX77686 contains one 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
-dt-bindings/clock/maxim,max77620.h.
-
-Following properties should be presend in main device node of the MFD chip.
-
-Required properties:
-
-- #clock-cells: from common clock binding; shall be set to 1.
-
-Optional properties:
-- clock-output-names: From common clock binding.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
-    - 1: 32khz_cp clock (max77686, max77802),
-    - 2: 32khz_pmic clock (max77686).
-
-Clocks are defined as preprocessor macros in above dt-binding header for
-respective chips.
-
-Example:
-
-1. With MAX77686:
-
-#include <dt-bindings/clock/maxim,max77686.h>
-/* ... */
-
-	Node of the MFD chip
-		max77686: max77686@9 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77686 MAX77686_CLK_PMIC>;
-		};
-
-2. With MAX77802:
-
-#include <dt-bindings/clock/maxim,max77802.h>
-/* ... */
-
-	Node of the MFD chip
-		max77802: max77802@9 {
-			compatible = "maxim,max77802";
-			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77802 MAX77802_CLK_32K_AP>;
-		};
-
-
-3. With MAX77620:
-
-#include <dt-bindings/clock/maxim,max77620.h>
-/* ... */
-
-	Node of the MFD chip
-		max77620: max77620@3c {
-			compatible = "maxim,max77620";
-			reg = <0x3c>;
-			#clock-cells = <1>;
-			/* ... */
-		};
-
-	Clock consumer node
-
-		foo@0 {
-			compatible = "bar,foo";
-			/* ... */
-			clock-names = "my-clock";
-			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt
deleted file mode 100644
index 61bec1100a94..000000000000
--- a/Documentation/devicetree/bindings/clock/maxim,max9485.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
-
-This device exposes 4 clocks in total:
-
-- MAX9485_MCLKOUT: 	A gated, buffered output of the input clock of 27 MHz
-- MAX9485_CLKOUT:	A PLL that can be configured to 16 different discrete
-			frequencies
-- MAX9485_CLKOUT[1,2]:	Two gated outputs for MAX9485_CLKOUT
-
-MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
-requests.
-
-Required properties:
-- compatible:	"maxim,max9485"
-- clocks:	Input clock, must provice 27.000 MHz
-- clock-names:	Must be set to "xclk"
-- #clock-cells: From common clock binding; shall be set to 1
-
-Optional properties:
-- reset-gpios:		GPIO descriptor connected to the #RESET input pin
-- vdd-supply:		A regulator node for Vdd
-- clock-output-names:	Name of output clocks, as defined in common clock
-			bindings
-
-If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
-and "clkout2".
-
-Clocks are defined as preprocessor macros in the dt-binding header.
-
-Example:
-
-	#include <dt-bindings/clock/maxim,max9485.h>
-
-	xo-27mhz: xo-27mhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-
-	&i2c0 {
-		max9485: audio-clock@63 {
-			reg = <0x63>;
-			compatible = "maxim,max9485";
-			clock-names = "xclk";
-			clocks = <&xo-27mhz>;
-			reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			vdd-supply = <&3v3-reg>;
-			#clock-cells = <1>;
-		};
-	};
-
-	// Clock consumer node
-
-	foo@0 {
-		compatible = "bar,foo";
-		/* ... */
-		clock-names = "foo-input-clk";
-		clocks = <&max9485 MAX9485_CLKOUT1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.yaml b/Documentation/devicetree/bindings/clock/maxim,max9485.yaml
new file mode 100644
index 000000000000..f9d8941c7235
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max9485.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/maxim,max9485.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9485 Programmable Audio Clock Generator
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description: >
+  Maxim MAX9485 Programmable Audio Clock Generator exposes 4 clocks in total:
+
+    - MAX9485_MCLKOUT:  A gated, buffered output of the input clock of 27 MHz
+    - MAX9485_CLKOUT:   A PLL that can be configured to 16 different discrete
+                        frequencies
+    - MAX9485_CLKOUT[1,2]:  Two gated outputs for MAX9485_CLKOUT
+
+  MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+  requests.
+
+properties:
+  compatible:
+    const: maxim,max9485
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock. Must provide 27 MHz
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xclk
+
+  '#clock-cells':
+    const: 1
+
+  reset-gpios:
+    description: >
+      GPIO descriptor connected to the #RESET input pin
+
+  vdd-supply:
+    description: A regulator node for Vdd
+
+  clock-output-names:
+    description: Name of output clocks, as defined in common clock bindings
+    items:
+      - const: mclkout
+      - const: clkout
+      - const: clkout1
+      - const: clkout2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@63 {
+            compatible = "maxim,max9485";
+            reg = <0x63>;
+            #clock-cells = <1>;
+            clock-names = "xclk";
+            clocks = <&xo_27mhz>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+            vdd-supply = <&reg_3v3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 000000000000..591a9e862c7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>
+  and <dt-bindings/clock/mediatek,mt*-apmixedsys.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7981-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt7988-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6735-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixed
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml
new file mode 100644
index 000000000000..f9cddacc2eae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ethsys controller
+
+description:
+  The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+maintainers:
+  - James Liao <jamesjj.liao@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-ethsys
+              - mediatek,mt7622-ethsys
+              - mediatek,mt7629-ethsys
+              - mediatek,mt7981-ethsys
+              - mediatek,mt7986-ethsys
+              - mediatek,mt7988-ethsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-ethsys
+          - const: mediatek,mt2701-ethsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1b000000 {
+        compatible = "mediatek,mt2701-ethsys", "syscon";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/clock/mediatek,infracfg.yaml
new file mode 100644
index 000000000000..d1d30700d9b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,infracfg.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,infracfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The Mediatek infracfg controller provides various clocks and reset outputs
+  to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>
+  and <dt-bindings/clock/mediatek,mt*-infracfg.h>, and reset values in
+  <dt-bindings/reset/mt*-reset.h>, <dt-bindings/reset/mt*-resets.h> and
+  <dt-bindings/reset/mediatek,mt*-infracfg.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-infracfg
+              - mediatek,mt2712-infracfg
+              - mediatek,mt6735-infracfg
+              - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
+              - mediatek,mt6779-infracfg_ao
+              - mediatek,mt6797-infracfg
+              - mediatek,mt7622-infracfg
+              - mediatek,mt7629-infracfg
+              - mediatek,mt7981-infracfg
+              - mediatek,mt7986-infracfg
+              - mediatek,mt7988-infracfg
+              - mediatek,mt8135-infracfg
+              - mediatek,mt8167-infracfg
+              - mediatek,mt8173-infracfg
+              - mediatek,mt8183-infracfg
+              - mediatek,mt8516-infracfg
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-infracfg
+          - const: mediatek,mt2701-infracfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2701-infracfg
+          - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
+          - mediatek,mt7622-infracfg
+          - mediatek,mt7986-infracfg
+          - mediatek,mt8135-infracfg
+          - mediatek,mt8173-infracfg
+          - mediatek,mt8183-infracfg
+then:
+  required:
+    - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    infracfg: clock-controller@10001000 {
+        compatible = "mediatek,mt8173-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml
new file mode 100644
index 000000000000..9e7c725093aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt2701-hifsys.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HIFSYS clock and reset controller
+
+description:
+  The MediaTek HIFSYS controller provides various clocks and reset outputs to
+  the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-hifsys
+          - mediatek,mt7622-hifsys
+      - items:
+          - enum:
+              - mediatek,mt7623-hifsys
+          - const: mediatek,mt2701-hifsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt2701-hifsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 000000000000..04469eabc8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..b42f0f5c11b7 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MT7621 Clock Device Tree Bindings
+title: MT7621 Clock
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
@@ -22,6 +22,11 @@ description: |
 
   The clocks are provided inside a system controller node.
 
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
 properties:
   compatible:
     items:
@@ -37,6 +42,12 @@ properties:
       clocks.
     const: 1
 
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
   ralink,memctl:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -61,6 +72,7 @@ examples:
       compatible = "mediatek,mt7621-sysc", "syscon";
       reg = <0x0 0x100>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
       ralink,memctl = <&memc>;
       clock-output-names = "xtal", "cpu", "bus",
                            "50m", "125m", "150m",
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml
new file mode 100644
index 000000000000..9c3913f9092c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIESYS clock and reset controller
+
+description:
+  The MediaTek PCIESYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt7622-pciesys
+          - const: syscon
+      - const: mediatek,mt7629-pciesys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a100800 {
+        compatible = "mediatek,mt7622-pciesys", "syscon";
+        reg = <0x1a100800 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml
new file mode 100644
index 000000000000..da93eccdcfc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7622-ssusbsys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SSUSBSYS clock and reset controller
+
+description:
+  The MediaTek SSUSBSYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-ssusbsys
+      - mediatek,mt7629-ssusbsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt7622-ssusbsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml
new file mode 100644
index 000000000000..e32a0251ff6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-ethwarp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 ethwarp Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The Mediatek MT7988 ethwarp controller provides clocks and resets for the
+  Ethernet related subsystems found the MT7988 SoC.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7988-ethwarp
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/ti-syscon.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@15031000 {
+            compatible = "mediatek,mt7988-ethwarp";
+            reg = <0 0x15031000 0 0x1000>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml
new file mode 100644
index 000000000000..192f1451f0af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-xfi-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI PLL Clock Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek XFI PLL controller provides the 156.25MHz clock for the
+  Ethernet SerDes PHY from the 40MHz top_xtal clock.
+
+properties:
+  compatible:
+    const: mediatek,mt7988-xfi-pll
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        clock-controller@11f40000 {
+            compatible = "mediatek,mt7988-xfi-pll";
+            reg = <0 0x11f40000 0 0x1000>;
+            resets = <&watchdog 16>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
new file mode 100644
index 000000000000..f4e58bfa504f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
new file mode 100644
index 000000000000..d00327d12e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+  - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+  Frequency hopping control (FHCTL) is a piece of hardware that control
+  some PLLs to adopt "hopping" mechanism to adjust their frequency.
+  Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-fhctl
+      - mediatek,mt8173-fhctl
+      - mediatek,mt8186-fhctl
+      - mediatek,mt8192-fhctl
+      - mediatek,mt8195-fhctl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Phandles of the PLL with FHCTL hardware capability.
+    minItems: 1
+    maxItems: 30
+
+  mediatek,hopping-ssc-percent:
+    description: The percentage of spread spectrum clocking for one PLL.
+    minItems: 1
+    maxItems: 30
+    items:
+      default: 0
+      minimum: 0
+      maximum: 8
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    fhctl: fhctl@1000ce00 {
+        compatible = "mediatek,mt8186-fhctl";
+        reg = <0x1000ce00 0x200>;
+        clocks = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+        mediatek,hopping-ssc-percent = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 000000000000..1c446fbc5108
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
new file mode 100644
index 000000000000..5403242545ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-adsp-audio26m
+      - mediatek,mt8188-camsys
+      - mediatek,mt8188-camsys-rawa
+      - mediatek,mt8188-camsys-rawb
+      - mediatek,mt8188-camsys-yuva
+      - mediatek,mt8188-camsys-yuvb
+      - mediatek,mt8188-ccusys
+      - mediatek,mt8188-imgsys
+      - mediatek,mt8188-imgsys-wpe1
+      - mediatek,mt8188-imgsys-wpe2
+      - mediatek,mt8188-imgsys-wpe3
+      - mediatek,mt8188-imgsys1-dip-nr
+      - mediatek,mt8188-imgsys1-dip-top
+      - mediatek,mt8188-imp-iic-wrap-c
+      - mediatek,mt8188-imp-iic-wrap-en
+      - mediatek,mt8188-imp-iic-wrap-w
+      - mediatek,mt8188-ipesys
+      - mediatek,mt8188-mfgcfg
+      - mediatek,mt8188-vdecsys
+      - mediatek,mt8188-vdecsys-soc
+      - mediatek,mt8188-vencsys
+      - mediatek,mt8188-wpesys
+      - mediatek,mt8188-wpesys-vpp0
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8188-camsys-rawa
+              - mediatek,mt8188-camsys-rawb
+              - mediatek,mt8188-camsys-yuva
+              - mediatek,mt8188-camsys-yuvb
+              - mediatek,mt8188-imgsys-wpe1
+              - mediatek,mt8188-imgsys-wpe2
+              - mediatek,mt8188-imgsys-wpe3
+              - mediatek,mt8188-imgsys1-dip-nr
+              - mediatek,mt8188-imgsys1-dip-top
+              - mediatek,mt8188-ipesys
+
+    then:
+      required:
+        - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11283000 {
+        compatible = "mediatek,mt8188-imp-iic-wrap-c";
+        reg = <0x11283000 0x1000>;
+        #clock-cells = <1>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
new file mode 100644
index 000000000000..db13d51a4903
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8188-apmixedsys
+          - mediatek,mt8188-infracfg-ao
+          - mediatek,mt8188-pericfg-ao
+          - mediatek,mt8188-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+        compatible = "mediatek,mt8188-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
index c8c67c033f8c..b8d690e28bdc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/mediatek,mt8192-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek Functional Clock Controller for MT8192
 
@@ -24,7 +24,6 @@ properties:
           - mediatek,mt8192-imp_iic_wrap_w
           - mediatek,mt8192-imp_iic_wrap_n
           - mediatek,mt8192-msdc_top
-          - mediatek,mt8192-msdc
           - mediatek,mt8192-mfgcfg
           - mediatek,mt8192-imgsys
           - mediatek,mt8192-imgsys2
@@ -108,13 +107,6 @@ examples:
     };
 
   - |
-    msdc: clock-controller@11f60000 {
-        compatible = "mediatek,mt8192-msdc";
-        reg = <0x11f60000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     mfgcfg: clock-controller@13fbf000 {
         compatible = "mediatek,mt8192-mfgcfg";
         reg = <0x13fbf000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
index 5705bcf1fe47..bf8c9aacdf1e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/mediatek,mt8192-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek System Clock Controller for MT8192
 
@@ -29,6 +29,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
index 17fcbb45d121..fcc963aff087 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/mediatek,mt8195-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek Functional Clock Controller for MT8195
 
@@ -28,11 +28,9 @@ properties:
           - mediatek,mt8195-imp_iic_wrap_s
           - mediatek,mt8195-imp_iic_wrap_w
           - mediatek,mt8195-mfgcfg
-          - mediatek,mt8195-vppsys0
           - mediatek,mt8195-wpesys
           - mediatek,mt8195-wpesys_vpp0
           - mediatek,mt8195-wpesys_vpp1
-          - mediatek,mt8195-vppsys1
           - mediatek,mt8195-imgsys
           - mediatek,mt8195-imgsys1_dip_top
           - mediatek,mt8195-imgsys1_dip_nr
@@ -93,13 +91,6 @@ examples:
     };
 
   - |
-    vppsys0: clock-controller@14000000 {
-        compatible = "mediatek,mt8195-vppsys0";
-        reg = <0x14000000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     wpesys: clock-controller@14e00000 {
         compatible = "mediatek,mt8195-wpesys";
         reg = <0x14e00000 0x1000>;
@@ -121,13 +112,6 @@ examples:
     };
 
   - |
-    vppsys1: clock-controller@14f00000 {
-        compatible = "mediatek,mt8195-vppsys1";
-        reg = <0x14f00000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     imgsys: clock-controller@15000000 {
         compatible = "mediatek,mt8195-imgsys";
         reg = <0x15000000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
index 57a1503d95fe..69f096eb168d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/mediatek,mt8195-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek System Clock Controller for MT8195
 
@@ -37,6 +37,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8196-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8196-clock.yaml
new file mode 100644
index 000000000000..bfdbd2e4a167
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8196-clock.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8196-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8196
+
+maintainers:
+  - Guangjie Song <guangjie.song@mediatek.com>
+  - Laura Nao <laura.nao@collabora.com>
+
+description: |
+  The clock architecture in MediaTek SoCs is structured like below:
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The device nodes provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8196-imp-iic-wrap-c
+          - mediatek,mt8196-imp-iic-wrap-e
+          - mediatek,mt8196-imp-iic-wrap-n
+          - mediatek,mt8196-imp-iic-wrap-w
+          - mediatek,mt8196-mdpsys0
+          - mediatek,mt8196-mdpsys1
+          - mediatek,mt8196-pericfg-ao
+          - mediatek,mt8196-pextp0cfg-ao
+          - mediatek,mt8196-pextp1cfg-ao
+          - mediatek,mt8196-ufscfg-ao
+          - mediatek,mt8196-vencsys
+          - mediatek,mt8196-vencsys-c1
+          - mediatek,mt8196-vencsys-c2
+          - mediatek,mt8196-vdecsys
+          - mediatek,mt8196-vdecsys-soc
+          - mediatek,mt8196-vdisp-ao
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+    description:
+      Reset lines for PEXTP0/1 and UFS blocks.
+
+  mediatek,hardware-voter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the "Hardware Voter" (HWV), as named in the vendor
+      documentation for MT8196/MT6991.
+
+      The HWV is a SoC-internal fixed-function MCU used to collect votes from
+      both the Application Processor and other remote processors within the SoC.
+      It is intended to transparently enable or disable hardware resources (such
+      as power domains or clocks) based on internal vote aggregation handled by
+      the MCU's internal state machine.
+
+      However, in practice, this design is incomplete. While the HWV performs
+      some internal vote aggregation,software is still required to
+      - Manually enable power supplies externally, if present and if required
+      - Manually enable parent clocks via direct MMIO writes to clock controllers
+      - Enable the FENC after the clock has been ungated via direct MMIO
+      writes to clock controllers
+
+      As such, the HWV behaves more like a hardware-managed clock reference
+      counter than a true voter. Furthermore, it is not a separate
+      controller. It merely serves as an alternative interface to the same
+      underlying clock or power controller. Actual control still requires
+      direct access to the controller's own MMIO register space, in
+      addition to writing to the HWV's MMIO region.
+
+      For this reason, a custom phandle is used here - drivers need to directly
+      access the HWV MMIO region in a syscon-like fashion, due to how the
+      hardware is wired. This differs from true hardware voting systems, which
+      typically do not require custom phandles and rely instead on generic APIs
+      (clocks, power domains, interconnects).
+
+      The name "hardware-voter" is retained to match vendor documentation, but
+      this should not be reused or misunderstood as a proper voting mechanism.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg_ao: clock-controller@16640000 {
+        compatible = "mediatek,mt8196-pericfg-ao", "syscon";
+        reg = <0x16640000 0x1000>;
+        mediatek,hardware-voter = <&scp_hwv>;
+        #clock-cells = <1>;
+    };
+  - |
+    pextp0cfg_ao: clock-controller@169b0000 {
+        compatible = "mediatek,mt8196-pextp0cfg-ao", "syscon";
+        reg = <0x169b0000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8196-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8196-sys-clock.yaml
new file mode 100644
index 000000000000..660ab64f390d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8196-sys-clock.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8196-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8196
+
+maintainers:
+  - Guangjie Song <guangjie.song@mediatek.com>
+  - Laura Nao <laura.nao@collabora.com>
+
+description: |
+  The clock architecture in MediaTek SoCs is structured like below:
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys, apmixedsys_gp2, vlpckgen, armpll, ccipll, mfgpll and ptppll
+  provide most of the PLLs which are generated from the SoC's 26MHZ crystal oscillator.
+  The topckgen, topckgen_gp2 and vlpckgen provide dividers and muxes which
+  provide the clock source to other IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8196-apmixedsys
+          - mediatek,mt8196-armpll-b-pll-ctrl
+          - mediatek,mt8196-armpll-bl-pll-ctrl
+          - mediatek,mt8196-armpll-ll-pll-ctrl
+          - mediatek,mt8196-apmixedsys-gp2
+          - mediatek,mt8196-ccipll-pll-ctrl
+          - mediatek,mt8196-mfgpll-pll-ctrl
+          - mediatek,mt8196-mfgpll-sc0-pll-ctrl
+          - mediatek,mt8196-mfgpll-sc1-pll-ctrl
+          - mediatek,mt8196-ptppll-pll-ctrl
+          - mediatek,mt8196-topckgen
+          - mediatek,mt8196-topckgen-gp2
+          - mediatek,mt8196-vlpckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  mediatek,hardware-voter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the "Hardware Voter" (HWV), as named in the vendor
+      documentation for MT8196/MT6991.
+
+      The HWV is a SoC-internal fixed-function MCU used to collect votes from
+      both the Application Processor and other remote processors within the SoC.
+      It is intended to transparently enable or disable hardware resources (such
+      as power domains or clocks) based on internal vote aggregation handled by
+      the MCU's internal state machine.
+
+      However, in practice, this design is incomplete. While the HWV performs
+      some internal vote aggregation,software is still required to
+      - Manually enable power supplies externally, if present and if required
+      - Manually enable parent clocks via direct MMIO writes to clock controllers
+      - Enable the FENC after the clock has been ungated via direct MMIO
+      writes to clock controllers
+
+      As such, the HWV behaves more like a hardware-managed clock reference
+      counter than a true voter. Furthermore, it is not a separate
+      controller. It merely serves as an alternative interface to the same
+      underlying clock or power controller. Actual control still requires
+      direct access to the controller's own MMIO register space, in
+      addition to writing to the HWV's MMIO region.
+
+      For this reason, a custom phandle is used here - drivers need to directly
+      access the HWV MMIO region in a syscon-like fashion, due to how the
+      hardware is wired. This differs from true hardware voting systems, which
+      typically do not require custom phandles and rely instead on generic APIs
+      (clocks, power domains, interconnects).
+
+      The name "hardware-voter" is retained to match vendor documentation, but
+      this should not be reused or misunderstood as a proper voting mechanism.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys_clk: syscon@10000800 {
+        compatible = "mediatek,mt8196-apmixedsys", "syscon";
+        reg = <0x10000800 0x1000>;
+        #clock-cells = <1>;
+    };
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8196-topckgen", "syscon";
+        reg = <0x10000000 0x800>;
+        mediatek,hardware-voter = <&scp_hwv>;
+        #clock-cells = <1>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 000000000000..b327ecb4e524
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 000000000000..643f84660c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 000000000000..56bbd69b16d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MIPS and Ralink SoCs provides a system controller to allow
+  to access to system control registers. These registers include clock
+  and reset related ones so this node is both clock and reset provider
+  for the rest of the world.
+
+  These SoCs have an XTAL from where the cpu clock is
+  provided as well as derived clocks for the bus and the peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in:
+  [1]: <include/dt-bindings/clock/mediatek,mtmips-sysc.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ralink,mt7620-sysc
+              - ralink,mt7688-sysc
+              - ralink,rt2880-sysc
+              - ralink,rt3050-sysc
+              - ralink,rt3052-sysc
+              - ralink,rt3352-sysc
+              - ralink,rt3883-sysc
+              - ralink,rt5350-sysc
+          - const: syscon
+      - items:
+          - const: ralink,mt7628-sysc
+          - const: ralink,mt7688-sysc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+  '#reset-cells':
+    description:
+      The first cell indicates the reset bit within the register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
+    syscon@0 {
+      compatible = "ralink,rt5350-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/clock/mediatek,pericfg.yaml
index 8723dfe34bab..b98cf45efe2f 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,pericfg.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/mediatek,pericfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek Peripheral Configuration Controller
 
@@ -20,12 +20,17 @@ properties:
           - enum:
               - mediatek,mt2701-pericfg
               - mediatek,mt2712-pericfg
+              - mediatek,mt6735-pericfg
               - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
               - mediatek,mt7622-pericfg
               - mediatek,mt7629-pericfg
               - mediatek,mt8135-pericfg
               - mediatek,mt8173-pericfg
               - mediatek,mt8183-pericfg
+              - mediatek,mt8186-pericfg
+              - mediatek,mt8188-pericfg
+              - mediatek,mt8195-pericfg
               - mediatek,mt8516-pericfg
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/clock/mediatek,syscon.yaml b/Documentation/devicetree/bindings/clock/mediatek,syscon.yaml
new file mode 100644
index 000000000000..a52f90bfc9f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,syscon.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Clock controller syscon's
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The MediaTek clock controller syscon's provide various clocks to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-bdpsys
+              - mediatek,mt2701-imgsys
+              - mediatek,mt2701-vdecsys
+              - mediatek,mt2712-bdpsys
+              - mediatek,mt2712-imgsys
+              - mediatek,mt2712-jpgdecsys
+              - mediatek,mt2712-mcucfg
+              - mediatek,mt2712-mfgcfg
+              - mediatek,mt2712-vdecsys
+              - mediatek,mt2712-vencsys
+              - mediatek,mt6735-imgsys
+              - mediatek,mt6735-mfgcfg
+              - mediatek,mt6735-vdecsys
+              - mediatek,mt6735-vencsys
+              - mediatek,mt6765-camsys
+              - mediatek,mt6765-imgsys
+              - mediatek,mt6765-mipi0a
+              - mediatek,mt6765-vcodecsys
+              - mediatek,mt6779-camsys
+              - mediatek,mt6779-imgsys
+              - mediatek,mt6779-ipesys
+              - mediatek,mt6779-mfgcfg
+              - mediatek,mt6779-vdecsys
+              - mediatek,mt6779-vencsys
+              - mediatek,mt6797-imgsys
+              - mediatek,mt6797-vdecsys
+              - mediatek,mt6797-vencsys
+              - mediatek,mt8167-imgsys
+              - mediatek,mt8167-mfgcfg
+              - mediatek,mt8167-vdecsys
+              - mediatek,mt8173-imgsys
+              - mediatek,mt8173-vdecsys
+              - mediatek,mt8173-vencltsys
+              - mediatek,mt8173-vencsys
+              - mediatek,mt8183-camsys
+              - mediatek,mt8183-imgsys
+              - mediatek,mt8183-ipu_conn
+              - mediatek,mt8183-ipu_adl
+              - mediatek,mt8183-ipu_core0
+              - mediatek,mt8183-ipu_core1
+              - mediatek,mt8183-mcucfg
+              - mediatek,mt8183-mfgcfg
+              - mediatek,mt8183-vdecsys
+              - mediatek,mt8183-vencsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-bdpsys
+          - const: mediatek,mt2701-bdpsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-imgsys
+          - const: mediatek,mt2701-imgsys
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-vdecsys
+          - const: mediatek,mt2701-vdecsys
+          - const: syscon
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt8183-mfgcfg
+then:
+  properties:
+    power-domains: true
+else:
+  properties:
+    power-domains: false
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11220000 {
+        compatible = "mediatek,mt2701-bdpsys", "syscon";
+        reg = <0x11220000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 000000000000..c080fb0a1618
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h> and
+  <dt-bindings/clock/mediatek,mt*-topckgen.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6735-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7981-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt7988-mcusys
+              - mediatek,mt7988-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 000000000000..16106e8b637f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,lan966x-gck
+          - microchip,lan9691-gck
+      - items:
+          - enum:
+              - microchip,lan9698-gck
+              - microchip,lan9696-gck
+              - microchip,lan9694-gck
+              - microchip,lan9693-gck
+              - microchip,lan9692-gck
+          - const: microchip,lan9691-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 000000000000..f1770360798f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 000000000000..ee4f31596d97
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    oneOf:
+      - items:
+          - description: |
+              clock config registers:
+              These registers contain enable, reset & divider tables for the, cpu,
+              axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+              for the peripheral clocks.
+          - description: |
+              mss pll dri registers:
+              Block of registers responsible for dynamic reconfiguration of the mss
+              pll
+        deprecated: true
+      - items:
+          - description: |
+              mss pll dri registers:
+              Block of registers responsible for dynamic reconfiguration of the mss
+              pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            clkcfg: clock-controller@3E001000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x3E001000 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
deleted file mode 100644
index c93d88fdd858..000000000000
--- a/Documentation/devicetree/bindings/clock/microchip,pic32.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Microchip PIC32 Clock Controller Binding
-----------------------------------------
-Microchip clock controller is consists of few oscillators, PLL, multiplexer
-and few divider modules.
-
-This binding uses common clock bindings.
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible: shall be "microchip,pic32mzda-clk".
-- reg: shall contain base address and length of clock registers.
-- #clock-cells: shall be 1.
-
-Optional properties:
-- microchip,pic32mzda-sosc: shall be added only if platform has
-  secondary oscillator connected.
-
-Example:
-	rootclk: clock-controller@1f801200 {
-		compatible = "microchip,pic32mzda-clk";
-		reg = <0x1f801200 0x200>;
-		#clock-cells = <1>;
-		/* optional */
-		microchip,pic32mzda-sosc;
-	};
-
-
-The clock consumer shall specify the desired clock-output of the clock
-controller (as defined in [2]) by specifying output-id in its "clock"
-phandle cell.
-[2] include/dt-bindings/clock/microchip,pic32-clock.h
-
-For example for UART2:
-uart2: serial@2 {
-	compatible = "microchip,pic32mzda-uart";
-	reg = <>;
-	interrupts = <>;
-	clocks = <&rootclk PB2CLK>;
-};
diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml b/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml
new file mode 100644
index 000000000000..a14a838140f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,pic32mzda-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32MZDA Clock Controller
+
+maintainers:
+  - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+description:
+  Microchip clock controller consists of a few oscillators, PLL, multiplexer
+  and divider modules.
+
+properties:
+  compatible:
+    const: microchip,pic32mzda-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  microchip,pic32mzda-sosc:
+    description: Presence of secondary oscillator.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1f801200 {
+        compatible = "microchip,pic32mzda-clk";
+        reg = <0x1f801200 0x200>;
+        #clock-cells = <1>;
+        /* optional */
+        microchip,pic32mzda-sosc;
+    };
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index 6d39344d2b70..d786f1e2d007 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut SoCs Clock Controller Binding
+title: Milbeaut SoCs Clock Controller
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
@@ -40,38 +40,11 @@ required:
 additionalProperties: false
 
 examples:
-  # Clock controller node:
   - |
-    m10v-clk-ctrl@1d021000 {
+    clock-controller@1d021000 {
         compatible = "socionext,milbeaut-m10v-ccu";
         reg = <0x1d021000 0x4000>;
         #clock-cells = <1>;
         clocks = <&clki40mhz>;
     };
-
-  # Required an external clock for Clock controller node:
-  - |
-    clocks {
-        clki40mhz: clki40mhz {
-            compatible = "fixed-clock";
-            #clock-cells = <0>;
-            clock-frequency = <40000000>;
-        };
-        /* other clocks */
-    };
-
-  # The clock consumer shall specify the desired clock-output of the clock
-  # controller as below by specifying output-id in its "clk" phandle cell.
-  # 2: uart
-  # 4: 32-bit timer
-  # 7: UHS-I/II
-  - |
-    serial@1e700010 {
-        compatible = "socionext,milbeaut-usio-uart";
-        reg = <0x1e700010 0x10>;
-        interrupts = <0 141 0x4>, <0 149 0x4>;
-        interrupt-names = "rx", "tx";
-        clocks = <&clk 2>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
deleted file mode 100644
index fedea84314a1..000000000000
--- a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Device Tree Clock bindings for arch-moxart
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-MOXA ART SoCs allow to determine PLL output and APB frequencies
-by reading registers holding multiplier and divisor information.
-
-
-PLL:
-
-Required properties:
-- compatible : Must be "moxa,moxart-pll-clock"
-- #clock-cells : Should be 0
-- reg : Should contain registers location and length
-- clocks : Should contain phandle + clock-specifier for the parent clock
-
-Optional properties:
-- clock-output-names : Should contain clock name
-
-
-APB:
-
-Required properties:
-- compatible : Must be "moxa,moxart-apb-clock"
-- #clock-cells : Should be 0
-- reg : Should contain registers location and length
-- clocks : Should contain phandle + clock-specifier for the parent clock
-
-Optional properties:
-- clock-output-names : Should contain clock name
-
-
-For example:
-
-	clk_pll: clk_pll@98100000 {
-		compatible = "moxa,moxart-pll-clock";
-		#clock-cells = <0>;
-		reg = <0x98100000 0x34>;
-	};
-
-	clk_apb: clk_apb@98100000 {
-		compatible = "moxa,moxart-apb-clock";
-		#clock-cells = <0>;
-		reg = <0x98100000 0x34>;
-		clocks = <&clk_pll>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml
new file mode 100644
index 000000000000..bcf7cc240eba
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/moxa,moxart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MOXA ART Clock Controllers
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  MOXA ART SoCs allow to determine PLL output and APB frequencies by reading
+  registers holding multiplier and divisor information.
+
+properties:
+  compatible:
+    enum:
+      - moxa,moxart-apb-clock
+      - moxa,moxart-pll-clock
+
+  "#clock-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 000000000000..a9ad7ab5230c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
deleted file mode 100644
index d8f5c490f893..000000000000
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Core Clock bindings for Marvell MVEBU SoCs
-
-Marvell MVEBU SoCs usually allow to determine core clock frequencies by
-reading the Sample-At-Reset (SAR) register. The core clock consumer should
-specify the desired clock by having the clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs and clock names on Armada 370/XP:
- 0 = tclk    (Internal Bus clock)
- 1 = cpuclk  (CPU clock)
- 2 = nbclk   (L2 Cache clock)
- 3 = hclk    (DRAM control clock)
- 4 = dramclk (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 375:
- 0 = tclk    (Internal Bus clock)
- 1 = cpuclk  (CPU clock)
- 2 = l2clk   (L2 Cache clock)
- 3 = ddrclk  (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 380/385:
- 0 = tclk    (Internal Bus clock)
- 1 = cpuclk  (CPU clock)
- 2 = l2clk   (L2 Cache clock)
- 3 = ddrclk  (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 39x:
- 0 = tclk    (Internal Bus clock)
- 1 = cpuclk  (CPU clock)
- 2 = nbclk   (Coherent Fabric clock)
- 3 = hclk    (SDRAM Controller Internal Clock)
- 4 = dclk    (SDRAM Interface Clock)
- 5 = refclk  (Reference Clock)
-
-The following is a list of provided IDs and clock names on 98dx3236:
- 0 = tclk    (Internal Bus clock)
- 1 = cpuclk  (CPU clock)
- 2 = ddrclk   (DDR clock)
- 3 = mpll    (MPLL Clock)
-
-The following is a list of provided IDs and clock names on Kirkwood and Dove:
- 0 = tclk   (Internal Bus clock)
- 1 = cpuclk (CPU0 clock)
- 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
- 3 = ddrclk (DDR controller clock derived from CPU0 clock)
-
-The following is a list of provided IDs and clock names on Orion5x:
- 0 = tclk   (Internal Bus clock)
- 1 = cpuclk (CPU0 clock)
- 2 = ddrclk (DDR controller clock derived from CPU0 clock)
-
-Required properties:
-- compatible : shall be one of the following:
-	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
-	"marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
-	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
-	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
-	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
-	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
-	"marvell,dove-core-clock" - for Dove SoC core clocks
-	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
-	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
-	"marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
-	"marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
-	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
-	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
-	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
-- reg : shall be the register address of the Sample-At-Reset (SAR) register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Optional properties:
-- clock-output-names : from common clock binding; allows overwrite default clock
-	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
-
-Example:
-
-core_clk: core-clocks@d0214 {
-	compatible = "marvell,dove-core-clock";
-	reg = <0xd0214 0x4>;
-	#clock-cells = <1>;
-};
-
-spi0: spi@10600 {
-	compatible = "marvell,orion-spi";
-	/* ... */
-	/* get tclk from core clock provider */
-	clocks = <&core_clk 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
deleted file mode 100644
index c7b4e3a6b2c6..000000000000
--- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Core Divider Clock bindings for Marvell MVEBU SoCs
-
-The following is a list of provided IDs and clock names on Armada 370/XP:
- 0 = nand (NAND clock)
-
-Required properties:
-- compatible : must be "marvell,armada-370-corediv-clock",
-		       "marvell,armada-375-corediv-clock",
-		       "marvell,armada-380-corediv-clock",
-                       "marvell,mv98dx3236-corediv-clock",
-
-- reg : must be the register address of Core Divider control register
-- #clock-cells : from common clock binding; shall be set to 1
-- clocks : must be set to the parent's phandle
-
-Example:
-
-corediv_clk: corediv-clocks@18740 {
-	compatible = "marvell,armada-370-corediv-clock";
-	reg = <0x18740 0xc>;
-	#clock-cells = <1>;
-	clocks = <&pll>;
-};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
deleted file mode 100644
index 7f28506eaee7..000000000000
--- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Device Tree Clock bindings for cpu clock of Marvell EBU platforms
-
-Required properties:
-- compatible : shall be one of the following:
-	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
-	"marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
-- reg : Address and length of the clock complex register set, followed
-        by address and length of the PMU DFS registers
-- #clock-cells : should be set to 1.
-- clocks : shall be the input parent clock phandle for the clock.
-
-cpuclk: clock-complex@d0018700 {
-	#clock-cells = <1>;
-	compatible = "marvell,armada-xp-cpu-clock";
-	reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
-	clocks = <&coreclk 1>;
-}
-
-cpu@0 {
-	compatible = "marvell,sheeva-v7";
-	reg = <0>;
-	clocks = <&cpuclk 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
deleted file mode 100644
index de562da2ae77..000000000000
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-* Gated Clock bindings for Marvell EBU SoCs
-
-Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
-peripheral clocks to be gated to save some power. The clock consumer
-should specify the desired clock by having the clock ID in its
-"clocks" phandle cell. The clock ID is directly mapped to the
-corresponding clock gating control bit in HW to ease manual clock
-lookup in datasheet.
-
-The following is a list of provided IDs for Armada 370:
-ID	Clock	Peripheral
------------------------------------
-0	Audio	AC97 Cntrl
-1	pex0_en	PCIe 0 Clock out
-2	pex1_en	PCIe 1 Clock out
-3	ge1	Gigabit Ethernet 1
-4	ge0	Gigabit Ethernet 0
-5	pex0	PCIe Cntrl 0
-9	pex1	PCIe Cntrl 1
-15	sata0	SATA Host 0
-17	sdio	SDHCI Host
-23	crypto	CESA (crypto engine)
-25	tdm	Time Division Mplx
-28	ddr	DDR Cntrl
-30	sata1	SATA Host 0
-
-The following is a list of provided IDs for Armada 375:
-ID	Clock		Peripheral
------------------------------------
-2	mu		Management Unit
-3	pp		Packet Processor
-4	ptp		PTP
-5	pex0		PCIe 0 Clock out
-6	pex1		PCIe 1 Clock out
-8	audio		Audio Cntrl
-11	nd_clk		Nand Flash Cntrl
-14	sata0_link	SATA 0 Link
-15	sata0_core	SATA 0 Core
-16	usb3		USB3 Host
-17	sdio		SDHCI Host
-18	usb		USB Host
-19	gop		Gigabit Ethernet MAC
-20	sata1_link	SATA 1 Link
-21	sata1_core	SATA 1 Core
-22	xor0		XOR DMA 0
-23	xor1		XOR DMA 0
-24	copro		Coprocessor
-25	tdm		Time Division Mplx
-28	crypto0_enc	Cryptographic Unit Port 0 Encryption
-29	crypto0_core	Cryptographic Unit Port 0 Core
-30	crypto1_enc	Cryptographic Unit Port 1 Encryption
-31	crypto1_core	Cryptographic Unit Port 1 Core
-
-The following is a list of provided IDs for Armada 380/385:
-ID	Clock		Peripheral
------------------------------------
-0	audio		Audio
-2	ge2		Gigabit Ethernet 2
-3	ge1		Gigabit Ethernet 1
-4	ge0		Gigabit Ethernet 0
-5	pex1		PCIe 1
-6	pex2		PCIe 2
-7	pex3		PCIe 3
-8	pex0		PCIe 0
-9	usb3h0		USB3 Host 0
-10	usb3h1		USB3 Host 1
-11	usb3d		USB3 Device
-13	bm		Buffer Management
-14	crypto0z	Cryptographic 0 Z
-15	sata0		SATA 0
-16	crypto1z	Cryptographic 1 Z
-17	sdio		SDIO
-18	usb2		USB 2
-21	crypto1		Cryptographic 1
-22	xor0		XOR 0
-23	crypto0		Cryptographic 0
-25	tdm		Time Division Multiplexing
-28	xor1		XOR 1
-30	sata1		SATA 1
-
-The following is a list of provided IDs for Armada 39x:
-ID	Clock		Peripheral
------------------------------------
-5	pex1		PCIe 1
-6	pex2		PCIe 2
-7	pex3		PCIe 3
-8	pex0		PCIe 0
-9	usb3h0		USB3 Host 0
-10	usb3h1		USB3 Host 1
-15	sata0		SATA 0
-17	sdio		SDIO
-22	xor0		XOR 0
-28	xor1		XOR 1
-
-The following is a list of provided IDs for Armada XP:
-ID	Clock	Peripheral
------------------------------------
-0	audio	Audio Cntrl
-1	ge3	Gigabit Ethernet 3
-2	ge2	Gigabit Ethernet 2
-3	ge1	Gigabit Ethernet 1
-4	ge0	Gigabit Ethernet 0
-5	pex0	PCIe Cntrl 0
-6	pex1	PCIe Cntrl 1
-7	pex2	PCIe Cntrl 2
-8	pex3	PCIe Cntrl 3
-13	bp
-14	sata0lnk
-15	sata0	SATA Host 0
-16	lcd	LCD Cntrl
-17	sdio	SDHCI Host
-18	usb0	USB Host 0
-19	usb1	USB Host 1
-20	usb2	USB Host 2
-22	xor0	XOR DMA 0
-23	crypto	CESA engine
-25	tdm	Time Division Mplx
-28	xor1	XOR DMA 1
-29	sata1lnk
-30	sata1	SATA Host 1
-
-The following is a list of provided IDs for 98dx3236:
-ID	Clock	Peripheral
------------------------------------
-3	ge1	Gigabit Ethernet 1
-4	ge0	Gigabit Ethernet 0
-5	pex0	PCIe Cntrl 0
-17	sdio	SDHCI Host
-18	usb0	USB Host 0
-22	xor0	XOR DMA 0
-
-The following is a list of provided IDs for Dove:
-ID	Clock	Peripheral
------------------------------------
-0	usb0	USB Host 0
-1	usb1	USB Host 1
-2	ge	Gigabit Ethernet
-3	sata	SATA Host
-4	pex0	PCIe Cntrl 0
-5	pex1	PCIe Cntrl 1
-8	sdio0	SDHCI Host 0
-9	sdio1	SDHCI Host 1
-10	nand	NAND Cntrl
-11	camera	Camera Cntrl
-12	i2s0	I2S Cntrl 0
-13	i2s1	I2S Cntrl 1
-15	crypto	CESA engine
-21	ac97	AC97 Cntrl
-22	pdma	Peripheral DMA
-23	xor0	XOR DMA 0
-24	xor1	XOR DMA 1
-30	gephy	Gigabit Ethernel PHY
-Note: gephy(30) is implemented as a parent clock of ge(2)
-
-The following is a list of provided IDs for Kirkwood:
-ID	Clock	Peripheral
------------------------------------
-0	ge0	Gigabit Ethernet 0
-2	pex0	PCIe Cntrl 0
-3	usb0	USB Host 0
-4	sdio	SDIO Cntrl
-5	tsu	Transp. Stream Unit
-6	dunit	SDRAM Cntrl
-7	runit	Runit
-8	xor0	XOR DMA 0
-9	audio	I2S Cntrl 0
-14	sata0	SATA Host 0
-15	sata1	SATA Host 1
-16	xor1	XOR DMA 1
-17	crypto	CESA engine
-18	pex1	PCIe Cntrl 1
-19	ge1	Gigabit Ethernet 1
-20	tdm	Time Division Mplx
-
-Required properties:
-- compatible : shall be one of the following:
-	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
-	"marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
-	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
-	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
-	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
-	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
-	"marvell,dove-gating-clock" - for Dove SoC clock gating
-	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
-- reg : shall be the register address of the Clock Gating Control register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Optional properties:
-- clocks : default parent clock phandle (e.g. tclk)
-
-Example:
-
-gate_clk: clock-gating-control@d0038 {
-	compatible = "marvell,dove-gating-clock";
-	reg = <0xd0038 0x4>;
-	/* default parent clock is tclk */
-	clocks = <&core_clk 0>;
-	#clock-cells = <1>;
-};
-
-sdio0: sdio@92000 {
-	compatible = "marvell,dove-sdhci";
-	/* get clk gate bit 8 (sdio0) */
-	clocks = <&gate_clk 8>;
-};
diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt
deleted file mode 100644
index 7c3bc8bb5b9f..000000000000
--- a/Documentation/devicetree/bindings/clock/nspire-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-TI-NSPIRE Clocks
-
-Required properties:
-- compatible: Valid compatible properties include:
-	"lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
-	"lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
-	"lsi,nspire-cx-clock" for the base clock in the CX model
-	"lsi,nspire-classic-clock" for the base clock in the older model
-
-- reg: Physical base address of the controller and length of memory mapped
-	region.
-
-Optional:
-- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
-	clock where it divides the rate from.
-
-Example:
-
-ahb_clk {
-	#clock-cells = <0>;
-	compatible = "lsi,nspire-cx-clock";
-	reg = <0x900B0000 0x4>;
-	clocks = <&base_clk>;
-};
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
new file mode 100644
index 000000000000..8f0c43683729
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  The MA35D1 clock controller generates clocks for the whole chip,
+  including system clocks and all peripheral clocks.
+
+  See also:
+    include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-clk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,pll-mode:
+    description:
+      A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+      EPLL, and VPLL in sequential.
+    maxItems: 5
+    items:
+      enum:
+        - integer
+        - fractional
+        - spread-spectrum
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    clock-controller@40460200 {
+        compatible = "nuvoton,ma35d1-clk";
+        reg = <0x40460200 0x100>;
+        #clock-cells = <1>;
+        clocks = <&clk_hxt>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
deleted file mode 100644
index f82064546d11..000000000000
--- a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-* Nuvoton NPCM7XX Clock Controller
-
-Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
-generates and supplies clocks to all modules within the BMC.
-
-External clocks:
-
-There are six fixed clocks that are generated outside the BMC. All clocks are of
-a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
-clk_sysbypck are inputs to the clock controller.
-clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
-network. They are set on the device tree, but not used by the clock module. The
-network devices use them directly.
-Example can be found below.
-
-All available clocks are defined as preprocessor macros in:
-dt-bindings/clock/nuvoton,npcm7xx-clock.h
-and can be reused as DT sources.
-
-Required Properties of clock controller:
-
-	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
-		  Poleg BMC NPCM750
-
-	- reg: physical base address of the clock controller and length of
-		memory mapped region.
-
-	- #clock-cells: should be 1.
-
-Example: Clock controller node:
-
-	clk: clock-controller@f0801000 {
-		compatible = "nuvoton,npcm750-clk";
-		#clock-cells = <1>;
-		reg = <0xf0801000 0x1000>;
-		clock-names = "refclk", "sysbypck", "mcbypck";
-		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
-	};
-
-Example: Required external clocks for network:
-
-	/* external reference clock */
-	clk_refclk: clk-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "refclk";
-	};
-
-	/* external reference clock for cpu. float in normal operation */
-	clk_sysbypck: clk-sysbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "sysbypck";
-	};
-
-	/* external reference clock for MC. float in normal operation */
-	clk_mcbypck: clk-mcbypck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <800000000>;
-		clock-output-names = "mcbypck";
-	};
-
-	 /* external clock signal rg1refck, supplied by the phy */
-	clk_rg1refck: clk-rg1refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg1refck";
-	};
-
-	 /* external clock signal rg2refck, supplied by the phy */
-	clk_rg2refck: clk-rg2refck {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "clk_rg2refck";
-	};
-
-	clk_xin: clk-xin {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-output-names = "clk_xin";
-	};
-
-
-Example: GMAC controller node that consumes two clocks: a generated clk by the
-clock controller and a fixed clock from DT (clk_rg1refck).
-
-	ethernet0: ethernet@f0802000 {
-		compatible = "snps,dwmac";
-		reg = <0xf0802000 0x2000>;
-		interrupts = <0 14 4>;
-		interrupt-names = "macirq";
-		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
-		clock-names = "stmmaceth", "clk_gmac";
-	};
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml
new file mode 100644
index 000000000000..694dac68619c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm750-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM7XX Clock Controller
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+description: >
+  Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+  External clocks:
+
+  There are six fixed clocks that are generated outside the BMC. All clocks are of
+  a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+  clk_sysbypck are inputs to the clock controller.
+  clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+  network. They are set on the device tree, but not used by the clock module. The
+  network devices use them directly.
+
+  All available clocks are defined as preprocessor macros in:
+  dt-bindings/clock/nuvoton,npcm7xx-clock.h
+  and can be reused as DT sources.
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: sysbypck
+      - const: mcbypck
+
+  clocks:
+    items:
+      - description: refclk
+      - description: sysbypck
+      - description: mcbypck
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f0801000 {
+        compatible = "nuvoton,npcm750-clk";
+        #clock-cells = <1>;
+        reg = <0xf0801000 0x1000>;
+        clock-names = "refclk", "sysbypck", "mcbypck";
+        clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 000000000000..b901ca13cd25
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index ec7ab1483652..13bb616249a1 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -27,7 +27,9 @@ description: |
 
 properties:
   compatible:
-    const: nvidia,tegra124-car
+    enum:
+      - nvidia,tegra124-car
+      - nvidia,tegra132-car
 
   reg:
     maxItems: 1
@@ -35,7 +37,7 @@ properties:
   '#clock-cells':
     const: 1
 
-  "#reset-cells":
+  '#reset-cells':
     const: 1
 
   nvidia,external-memory-controller:
@@ -44,7 +46,7 @@ properties:
       phandle of the external memory controller node
 
 patternProperties:
-  "^emc-timings-[0-9]+$":
+  '^emc-timings-[0-9]+$':
     type: object
     properties:
       nvidia,ram-code:
@@ -54,7 +56,7 @@ patternProperties:
           this timing set is used for
 
     patternProperties:
-      "^timing-[0-9]+$":
+      '^timing-[0-9]+$':
         type: object
         properties:
           clock-frequency:
@@ -92,7 +94,7 @@ required:
   - compatible
   - reg
   - '#clock-cells'
-  - "#reset-cells"
+  - '#reset-cells'
 
 additionalProperties: false
 
@@ -106,10 +108,3 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA124_CLK_USB2>;
-        resets = <&car TEGRA124_CLK_USB2>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
index 958e0ad78c52..f7d347385b57 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -136,7 +136,7 @@ clock@70110000 {
 };
 
 /* pinmux nodes added for completeness. Binding doc can be found in:
- * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
  */
 
 pinmux: pinmux@700008d4 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index 459d2a525393..73cccc0df424 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -39,14 +39,44 @@ properties:
   '#clock-cells':
     const: 1
 
-  "#reset-cells":
+  '#reset-cells':
     const: 1
 
+patternProperties:
+  '^(sclk)|(pll-[cem])$':
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
   - '#clock-cells'
-  - "#reset-cells"
+  - '#reset-cells'
 
 additionalProperties: false
 
@@ -59,11 +89,11 @@ examples:
         reg = <0x60006000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
-    };
 
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA20_CLK_USB2>;
-        resets = <&car TEGRA20_CLK_USB2>;
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml b/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml
new file mode 100644
index 000000000000..27403b4c52d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,imx95-blk-ctl.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-blk-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx94-display-csr
+          - nxp,imx94-lvds-csr
+          - nxp,imx95-camera-csr
+          - nxp,imx95-display-csr
+          - nxp,imx95-hsio-blk-ctl
+          - nxp,imx95-lvds-csr
+          - nxp,imx95-netcmix-blk-ctrl
+          - nxp,imx95-vpu-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-vpu-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 114>;
+      power-domains = <&scmi_devpd 21>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml b/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml
new file mode 100644
index 000000000000..07f7412e7658
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,imx95-display-master-csr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,imx95-display-master-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX95 Display Master Block Control
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - const: nxp,imx95-display-master-csr
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See
+      include/dt-bindings/clock/nxp,imx95-clock.h
+
+  mux-controller:
+    type: object
+    $ref: /schemas/mux/reg-mux.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - mux-controller
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4c410000 {
+      compatible = "nxp,imx95-display-master-csr", "syscon";
+      reg = <0x4c410000 0x10000>;
+      #clock-cells = <1>;
+      clocks = <&scmi_clk 62>;
+      power-domains = <&scmi_devpd 3>;
+
+      mux: mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x4 0x00000001>; /* Pixel_link_sel */
+        idle-states = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml
new file mode 100644
index 000000000000..5459038cc954
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc1850-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 Clock Control Unit (CCU)
+
+description:
+  Each CGU base clock has several clock branches which can be turned on
+  or off independently by the Clock Control Units CCU1 or CCU2. The
+  branch clocks are distributed between CCU1 and CCU2.
+
+  Above text taken from NXP LPC1850 User Manual
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc1850-ccu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - base_usb0_clk
+        - base_periph_clk
+        - base_usb1_clk
+        - base_cpu_clk
+        - base_spifi_clk
+        - base_spi_clk
+        - base_apb1_clk
+        - base_apb3_clk
+        - base_adchs_clk
+        - base_sdio_clk
+        - base_ssp0_clk
+        - base_ssp1_clk
+        - base_uart0_clk
+        - base_uart1_clk
+        - base_uart2_clk
+        - base_uart3_clk
+        - base_audio_clk
+    description:
+      Which branch clocks that are available on the CCU depends on the
+      specific LPC part. Check the user manual for your specific part.
+
+      A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+    clock-controller@40051000 {
+        compatible = "nxp,lpc1850-ccu";
+        reg = <0x40051000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+                 <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+                 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+                 <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+        clock-names = "base_apb3_clk",   "base_apb1_clk",
+                      "base_spifi_clk",  "base_cpu_clk",
+                      "base_periph_clk", "base_usb0_clk",
+                      "base_usb1_clk",   "base_spi_clk";
+    };
+
+  - |
+    #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+    clock-controller@40052000 {
+        compatible = "nxp,lpc1850-ccu";
+        reg = <0x40052000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+                 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+                 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+                 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+        clock-names = "base_audio_clk", "base_uart3_clk",
+                      "base_uart2_clk", "base_uart1_clk",
+                      "base_uart0_clk", "base_ssp1_clk",
+                      "base_ssp0_clk",  "base_sdio_clk";
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml
new file mode 100644
index 000000000000..ed178c7df00c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc1850-cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 Clock Generation Unit (CGU)
+
+description: >
+  The CGU generates multiple independent clocks for the core and the
+  peripheral blocks of the LPC18xx. Each independent clock is called
+  a base clock and itself is one of the inputs to the two Clock
+  Control Units (CCUs) which control the branch clocks to the
+  individual peripherals.
+
+  The CGU selects the inputs to the clock generators from multiple
+  clock sources, controls the clock generation, and routes the outputs
+  of the clock generators through the clock source bus to the output
+  stages. Each output stage provides an independent clock source and
+  corresponds to one of the base clocks for the LPC18xx.
+
+  Above text taken from NXP LPC1850 User Manual.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc1850-cgu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      Which base clocks that are available on the CGU depends on the
+      specific LPC part. Base clocks are numbered from 0 to 27.
+
+      Number:         Name:                   Description:
+       0              BASE_SAFE_CLK           Base safe clock (always on) for WWDT
+       1              BASE_USB0_CLK           Base clock for USB0
+       2              BASE_PERIPH_CLK         Base clock for Cortex-M0SUB subsystem,
+                                        SPI, and SGPIO
+       3              BASE_USB1_CLK           Base clock for USB1
+       4              BASE_CPU_CLK            System base clock for ARM Cortex-M core
+                                        and APB peripheral blocks #0 and #2
+       5              BASE_SPIFI_CLK          Base clock for SPIFI
+       6              BASE_SPI_CLK            Base clock for SPI
+       7              BASE_PHY_RX_CLK         Base clock for Ethernet PHY Receive clock
+       8              BASE_PHY_TX_CLK         Base clock for Ethernet PHY Transmit clock
+       9              BASE_APB1_CLK           Base clock for APB peripheral block # 1
+      10              BASE_APB3_CLK           Base clock for APB peripheral block # 3
+      11              BASE_LCD_CLK            Base clock for LCD
+      12              BASE_ADCHS_CLK          Base clock for ADCHS
+      13              BASE_SDIO_CLK           Base clock for SD/MMC
+      14              BASE_SSP0_CLK           Base clock for SSP0
+      15              BASE_SSP1_CLK           Base clock for SSP1
+      16              BASE_UART0_CLK          Base clock for UART0
+      17              BASE_UART1_CLK          Base clock for UART1
+      18              BASE_UART2_CLK          Base clock for UART2
+      19              BASE_UART3_CLK          Base clock for UART3
+      20              BASE_OUT_CLK            Base clock for CLKOUT pin
+      24-21           -                       Reserved
+      25              BASE_AUDIO_CLK          Base clock for audio system (I2S)
+      26              BASE_CGU_OUT0_CLK       Base clock for CGU_OUT0 clock output
+      27              BASE_CGU_OUT1_CLK       Base clock for CGU_OUT1 clock output
+
+      BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+      BASE_ADCHS_CLK is only available on LPC4370.
+
+  clocks:
+    maxItems: 5
+
+  clock-indices:
+    minItems: 1
+    maxItems: 28
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 28
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@40050000 {
+        compatible = "nxp,lpc1850-cgu";
+        reg = <0x40050000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
deleted file mode 100644
index 20cbca3f41d8..000000000000
--- a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-NXP LPC32xx Clock Controller
-
-Required properties:
-- compatible: should be "nxp,lpc3220-clk"
-- reg:  should contain clock controller registers location and length
-- #clock-cells: must be 1, the cell holds id of a clock provided by the
-  clock controller
-- clocks: phandles of external oscillators, the list must contain one
-  32768 Hz oscillator and may have one optional high frequency oscillator
-- clock-names: list of external oscillator clock names, must contain
-  "xtal_32k" and may have optional "xtal"
-
-Examples:
-
-	/* System Control Block */
-	scb {
-		compatible = "simple-bus";
-		ranges = <0x0 0x040004000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		clk: clock-controller@0 {
-			compatible = "nxp,lpc3220-clk";
-			reg = <0x00 0x114>;
-			#clock-cells = <1>;
-
-			clocks = <&xtal_32k>, <&xtal>;
-			clock-names = "xtal_32k", "xtal";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.yaml
new file mode 100644
index 000000000000..16f79616d18a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc3220-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx Clock Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External 32768 Hz oscillator.
+      - description: Optional high frequency oscillator.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xtal_32k
+      - const: xtal
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@0 {
+        compatible = "nxp,lpc3220-clk";
+        reg = <0x00 0x114>;
+        #clock-cells = <1>;
+        clocks = <&xtal_32k>, <&xtal>;
+        clock-names = "xtal_32k", "xtal";
+    };
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
deleted file mode 100644
index 0aa249409b51..000000000000
--- a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-NXP LPC32xx USB Clock Controller
-
-Required properties:
-- compatible: should be "nxp,lpc3220-usb-clk"
-- reg:  should contain clock controller registers location and length
-- #clock-cells: must be 1, the cell holds id of a clock provided by the
-  USB clock controller
-
-Examples:
-
-	usb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x0 0x31020000 0x00001000>;
-
-		usbclk: clock-controller@f00 {
-			compatible = "nxp,lpc3220-usb-clk";
-			reg = <0xf00 0x100>;
-			#clock-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.yaml
new file mode 100644
index 000000000000..10361d2292fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc3220-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx USB Clock Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-usb-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f00 {
+        compatible = "nxp,lpc3220-usb-clk";
+        reg = <0xf00 0x100>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
deleted file mode 100644
index b652f3fb7796..000000000000
--- a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Oxford Semiconductor OXNAS SoC Family Standard Clocks
-================================================
-
-Please also refer to clock-bindings.txt in this directory for common clock
-bindings usage.
-
-Required properties:
-- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk"
-	      For OX820, should be "oxsemi,ox820-stdclk"
-- #clock-cells: 1, see below
-
-Parent node should have the following properties :
-- compatible: For OX810SE, should be
-		"oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
-	      For OX820, should be
-		"oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
-
-example:
-
-sys: sys-ctrl@000000 {
-	compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-	reg = <0x000000 0x100000>;
-
-	stdclk: stdclk {
-		compatible = "oxsemi,ox810se-stdclk";
-		#clock-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt
deleted file mode 100644
index 868db499eed2..000000000000
--- a/Documentation/devicetree/bindings/clock/pistachio-clock.txt
+++ /dev/null
@@ -1,123 +0,0 @@
-Imagination Technologies Pistachio SoC clock controllers
-========================================================
-
-Pistachio has four clock controllers (core clock, peripheral clock, peripheral
-general control, and top general control) which are instantiated individually
-from the device-tree.
-
-External clocks:
-----------------
-
-There are three external inputs to the clock controllers which should be
-defined with the following clock-output-names:
-- "xtal": External 52Mhz oscillator (required)
-- "audio_clk_in": Alternate audio reference clock (optional)
-- "enet_clk_in": Alternate ethernet PHY clock (optional)
-
-Core clock controller:
-----------------------
-
-The core clock controller generates clocks for the CPU, RPU (WiFi + BT
-co-processor), audio, and several peripherals.
-
-Required properties:
-- compatible: Must be "img,pistachio-clk".
-- reg: Must contain the base address and length of the core clock controller.
-- #clock-cells: Must be 1.  The single cell is the clock identifier.
-  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "xtal" (see "External clocks") and
-  "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
-  top-level general control.
-
-Example:
-	clk_core: clock-controller@18144000 {
-		compatible = "img,pistachio-clk";
-		reg = <0x18144000 0x800>;
-		clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
-			 <&cr_top EXT_CLK_ENET_IN>;
-		clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
-
-		#clock-cells = <1>;
-	};
-
-Peripheral clock controller:
-----------------------------
-
-The peripheral clock controller generates clocks for the DDR, ROM, and other
-peripherals.  The peripheral system clock ("periph_sys") generated by the core
-clock controller is the input clock to the peripheral clock controller.
-
-Required properties:
-- compatible: Must be "img,pistachio-periph-clk".
-- reg: Must contain the base address and length of the peripheral clock
-  controller.
-- #clock-cells: Must be 1.  The single cell is the clock identifier.
-  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "periph_sys", the peripheral system clock generated
-  by the core clock controller.
-
-Example:
-	clk_periph: clock-controller@18144800 {
-		compatible = "img,pistachio-clk-periph";
-		reg = <0x18144800 0x800>;
-		clocks = <&clk_core CLK_PERIPH_SYS>;
-		clock-names = "periph_sys";
-
-		#clock-cells = <1>;
-	};
-
-Peripheral general control:
----------------------------
-
-The peripheral general control block generates system interface clocks and
-resets for various peripherals.  It also contains miscellaneous peripheral
-control registers.  The system clock ("sys") generated by the peripheral clock
-controller is the input clock to the system clock controller.
-
-Required properties:
-- compatible: Must include "img,pistachio-periph-cr" and "syscon".
-- reg: Must contain the base address and length of the peripheral general
-  control registers.
-- #clock-cells: Must be 1.  The single cell is the clock identifier.
-  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "sys", the system clock generated by the peripheral
-  clock controller.
-
-Example:
-	cr_periph: syscon@18144800 {
-		compatible = "img,pistachio-cr-periph", "syscon";
-		reg = <0x18148000 0x1000>;
-		clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
-		clock-names = "sys";
-
-		#clock-cells = <1>;
-	};
-
-Top-level general control:
---------------------------
-
-The top-level general control block contains miscellaneous control registers and
-gates for the external clocks "audio_clk_in" and "enet_clk_in".
-
-Required properties:
-- compatible: Must include "img,pistachio-cr-top" and "syscon".
-- reg: Must contain the base address and length of the top-level
-  control registers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
-  "External clocks").
-- #clock-cells: Must be 1.  The single cell is the clock identifier.
-  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-
-Example:
-	cr_top: syscon@18144800 {
-		compatible = "img,pistachio-cr-top", "syscon";
-		reg = <0x18149000 0x200>;
-		clocks = <&audio_refclk>, <&ext_enet_in>;
-		clock-names = "audio_clk_in", "enet_clk_in";
-
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt
deleted file mode 100644
index 83db876b3b90..000000000000
--- a/Documentation/devicetree/bindings/clock/pwm-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Binding for an external clock signal driven by a PWM pin.
-
-This binding uses the common clock binding[1] and the common PWM binding[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/pwm/pwm.txt
-
-Required properties:
-- compatible : shall be "pwm-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- pwms : from common PWM binding; this determines the clock frequency
-  via the period given in the PWM specifier.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-- clock-frequency : Exact output frequency, in case the PWM period
-  is not exact but was rounded to nanoseconds.
-
-Example:
-	clock {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "mipi_mclk";
-		pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
-	};
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.yaml b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
new file mode 100644
index 000000000000..f88ecb2995e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/pwm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An external clock signal driven by a PWM pin.
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-clock
+
+  '#clock-cells':
+    const: 0
+
+  clock-frequency:
+    description: Exact output frequency, in case the PWM period is not exact
+      but was rounded to nanoseconds.
+
+  clock-output-names:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+        compatible = "pwm-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+        clock-output-names = "mipi_mclk";
+        pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
deleted file mode 100644
index 241fb0545b9e..000000000000
--- a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
-
-The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-pll" and one of the following
-  fallbacks:
-  - "qca,ar7100-pll"
-  - "qca,ar7240-pll"
-  - "qca,ar9130-pll"
-  - "qca,ar9330-pll"
-  - "qca,ar9340-pll"
-  - "qca,qca9550-pll"
-- reg: Base address and size of the controllers memory area
-- clock-names: Name of the input clock, has to be "ref"
-- clocks: phandle of the external reference clock
-- #clock-cells: has to be one
-
-Optional properties:
-- clock-output-names: should be "cpu", "ddr", "ahb"
-
-Example:
-
-	pll-controller@18050000 {
-		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
-		reg = <0x18050000 0x20>;
-
-		clock-names = "ref";
-		clocks = <&extosc>;
-
-		#clock-cells = <1>;
-		clock-output-names = "cpu", "ddr", "ahb";
-	};
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml b/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml
new file mode 100644
index 000000000000..69863e8a4648
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qca,ath79-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ATH79 PLL controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+  - Antony Pavlov <antonynpavlov@gmail.com>
+
+description: >
+  The PLL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-pll
+          - const: qca,ar9130-pll
+      - items:
+          - enum:
+              - qca,ar7100-pll
+              - qca,ar7240-pll
+              - qca,ar9130-pll
+              - qca,ar9330-pll
+              - qca,ar9340-pll
+              - qca,qca9530-pll
+              - qca,qca9550-pll
+              - qca,qca9560-pll
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: ahb
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@18050000 {
+        compatible = "qca,ar9132-pll", "qca,ar9130-pll";
+        reg = <0x18050000 0x20>;
+        clock-names = "ref";
+        clocks = <&extosc>;
+        #clock-cells = <1>;
+        clock-output-names = "cpu", "ddr", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index fbd758470b88..47ceab641a4c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A53 PLL Binding
+title: Qualcomm A53 PLL clock
 
 maintainers:
-  - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
@@ -16,7 +16,12 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq5018-a53pll
+      - qcom,ipq5332-a53pll
       - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
+      - qcom,ipq9574-a73pll
+      - qcom,msm8226-a7pll
       - qcom,msm8916-a53pll
       - qcom,msm8939-a53pll
 
@@ -36,6 +41,9 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
 required:
   - compatible
   - reg
@@ -44,14 +52,14 @@ required:
 additionalProperties: false
 
 examples:
-  #Example 1 - A53 PLL found on MSM8916 devices
+  # Example 1 - A53 PLL found on MSM8916 devices
   - |
     a53pll: clock@b016000 {
         compatible = "qcom,msm8916-a53pll";
         reg = <0xb016000 0x40>;
         #clock-cells = <0>;
     };
-  #Example 2 - A53 PLL found on IPQ6018 devices
+  # Example 2 - A53 PLL found on IPQ6018 devices
   - |
     a53pll_ipq: clock-controller@b116000 {
         compatible = "qcom,ipq6018-a53pll";
diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
index 8666e995725f..809c34eb7d5a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A7 PLL Binding
+title: Qualcomm A7 PLL clock
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description:
-  The A7 PLL on the Qualcomm platforms like SDX55 is used to provide high
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
   frequency clock to the CPU.
 
 properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
index c40a74b5d672..8b8932bd5a92 100644
--- a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs
+title: LPASS Always ON Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -17,7 +17,7 @@ description: |
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-aon
+    const: qcom,sm8250-lpass-aoncc
 
   reg:
     maxItems: 1
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -50,9 +52,10 @@ examples:
     #include <dt-bindings/sound/qcom,q6afe.h>
     clock-controller@3800000 {
       #clock-cells = <1>;
-      compatible = "qcom,sm8250-lpass-aon";
+      compatible = "qcom,sm8250-lpass-aoncc";
       reg = <0x03380000 0x40000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
index 915d76206ad0..cfca888f6014 100644
--- a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs
+title: LPASS Audio Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -53,6 +55,7 @@ examples:
       compatible = "qcom,sm8250-lpass-audiocc";
       reg = <0x03300000 0x30000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
index 9f239c3960d1..5c3ff37ec0d7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -4,16 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SM8250
+title: Qualcomm Camera Clock & Reset Controller on SM8250
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
+  Qualcomm camera clock control module provides the clocks, resets and
   power domains on SM8250.
 
-  See also dt-bindings/clock/qcom,camcc-sm8250.h
+  See also: include/dt-bindings/clock/qcom,camcc-sm8250.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
@@ -21,46 +24,49 @@ properties:
 
   clocks:
     items:
+      - description: AHB
       - description: Board XO source
+      - description: Board active XO source
       - description: Sleep clock source
 
   clock-names:
     items:
+      - const: iface
       - const: bi_tcxo
+      - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
+  power-domains:
+    items:
+      - description: MMCX power domain
 
   reg:
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@ad00000 {
       compatible = "qcom,sm8250-camcc";
       reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      clock-names = "bi_tcxo", "sleep_clk";
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
deleted file mode 100644
index c5eb6694fda9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,camcc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Camera Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-camcc".
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	camcc: clock-controller@ad00000 {
-		compatible = "qcom,sdm845-camcc";
-		reg = <0xad00000 0x10000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
new file mode 100644
index 000000000000..ffae037779a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the two MDSS instances on SC8280XP.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-dispcc0
+      - qcom,sc8280xp-dispcc1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: SoC sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc8280xp-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss0_dp_phy0 0>,
+               <&mdss0_dp_phy0 1>,
+               <&mdss0_dp_phy1 0>,
+               <&mdss0_dp_phy1 1>,
+               <&mdss0_dp_phy2 0>,
+               <&mdss0_dp_phy2 1>,
+               <&mdss0_dp_phy3 0>,
+               <&mdss0_dp_phy3 1>,
+               <&mdss0_dsi0_phy 0>,
+               <&mdss0_dsi0_phy 1>,
+               <&mdss0_dsi1_phy 0>,
+               <&mdss0_dsi1_phy 1>;
+      power-domains = <&rpmhpd SC8280XP_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 000000000000..ef2b1e204430
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller on SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6125.
+
+  See also: include/dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+      - description: GPLL0 div source from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+      - const: gcc_disp_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk",
+                    "gcc_disp_gpll0_div_clk_src";
+
+      required-opps = <&rpmhpd_opp_ret>;
+      power-domains = <&rpmpd SM6125_VDDCX>;
+
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 000000000000..a602e882e964
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also: include/dt-bindings/clock/qcom,dispcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 31497677e8de..53a5ab319159 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150 and SM8250.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8150/SM8250/SM8350.
 
-  See also:
-    dt-bindings/clock/qcom,dispcc-sm8150.h
-    dt-bindings/clock/qcom,dispcc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,dispcc-sm8150.h
+    include/dt-bindings/clock/qcom,dispcc-sm8250.h
+    include/dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
@@ -23,8 +24,10 @@ properties:
       - qcom,sc8180x-dispcc
       - qcom,sm8150-dispcc
       - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
 
   clocks:
+    minItems: 7
     items:
       - description: Board XO source
       - description: Byte clock from DSI PHY0
@@ -33,8 +36,15 @@ properties:
       - description: Pixel clock from DSI PHY1
       - description: Link clock from DP PHY
       - description: VCO DIV clock from DP PHY
+      - description: Link clock from eDP PHY
+      - description: VCO DIV clock from eDP PHY
+      - description: Link clock from DP1 PHY
+      - description: VCO DIV clock from DP1 PHY
+      - description: Link clock from DP2 PHY
+      - description: VCO DIV clock from DP2 PHY
 
   clock-names:
+    minItems: 7
     items:
       - const: bi_tcxo
       - const: dsi0_phy_pll_out_byteclk
@@ -43,18 +53,12 @@ properties:
       - const: dsi1_phy_pll_out_dsiclk
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+      - const: edp_phy_pll_link_clk
+      - const: edp_phy_pll_vco_div_clk
+      - const: dptx1_phy_pll_link_clk
+      - const: dptx1_phy_pll_vco_div_clk
+      - const: dptx2_phy_pll_link_clk
+      - const: dptx2_phy_pll_vco_div_clk
 
   power-domains:
     description:
@@ -68,19 +72,31 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,sc8180x-dispcc
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          maxItems: 7
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -101,7 +117,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbfb9..27df7e3e5bf3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,39 +4,53 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on APQ8064.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8064.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8960.h
-  - dt-bindings/reset/qcom,gcc-msm8960.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8960.h
+    include/dt-bindings/reset/qcom,gcc-msm8960.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
 
   nvmem-cells:
     minItems: 1
     maxItems: 2
+    deprecated: true
     description:
       Qualcomm TSENS (thermal sensor device) on some devices can
       be part of GCC and hence the TSENS properties can also be part
@@ -46,39 +60,40 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
+    deprecated: true
     items:
       - const: calib
       - const: calib_backup
 
   '#thermal-sensor-cells':
     const: 1
+    deprecated: true
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  '#power-domain-cells': false
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 000000000000..0a0a26d9beab
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8084.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-apq8084.h
+    include/dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: UFS RX symbol 0 clock
+      - description: UFS RX symbol 1 clock
+      - description: UFS TX symbol 0 clock
+      - description: UFS TX symbol 1 clock
+      - description: SATA ASIC0 clock
+      - description: SATA RX clock
+      - description: PCIe PIPE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+      - const: ufs_tx_symbol_1_clk_src
+      - const: sata_asic0_clk
+      - const: sata_rx_clk
+      - const: pcie_pipe
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clocks = <&xo_board>,
+                 <&sleep_clk>,
+                 <&ufsphy 0>,
+                 <&ufsphy 1>,
+                 <&ufsphy 2>,
+                 <&ufsphy 3>,
+                 <&sata 0>,
+                 <&sata 1>,
+                 <&pcie_phy>;
+        clock-names = "xo",
+                      "sleep_clk",
+                      "ufs_rx_symbol_0_clk_src",
+                      "ufs_rx_symbol_1_clk_src",
+                      "ufs_tx_symbol_0_clk_src",
+                      "ufs_tx_symbol_1_clk_src",
+                      "sata_asic0_clk",
+                      "sata_rx_clk",
+                      "pcie_pipe";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
new file mode 100644
index 000000000000..c91039dc100e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq4019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ4019
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robert.markoo@sartura.hr>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ4019.
+
+  See also: include/dt-bindings/clock/qcom,gcc-ipq4019.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq4019
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq4019";
+      reg = <0x1800000 0x60000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
new file mode 100644
index 000000000000..4d2614d4f368
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ6018
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robimarko@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ6018.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq6018
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq6018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..a71557395c01
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8064
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+    include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    minItems: 2
+    items:
+      - description: PXO source
+      - description: CXO source
+      - description: PLL4 from LCC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pxo
+      - const: cxo
+      - const: pll4
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+      clock-names = "pxo", "cxo", "pll4";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 98572b4a9b60..00d7df75b3d6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -4,43 +4,44 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+title: Qualcomm Global Clock & Reset Controller on IPQ8074
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on IPQ8074.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8074.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-ipq8074.h
+  See also: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
     const: qcom,gcc-ipq8074
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+      - description: Gen3 QMP PCIe PHY PIPE clock
+      - description: Gen2 QMP PCIe PHY PIPE clock
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: pcie0_pipe
+      - const: pcie1_pipe
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
+  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -48,6 +49,7 @@ examples:
       compatible = "qcom,gcc-ipq8074";
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
+      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml
new file mode 100644
index 000000000000..d7da30b0e7ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9607.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-mdm9607.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-mdm9607
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9607";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml
new file mode 100644
index 000000000000..418dea31eb62
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9615.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-mdm9615.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-mdm9615
+
+  clocks:
+    items:
+      - description: CXO clock
+      - description: PLL4 from LLC
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9615";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&cxo_board>,
+               <&lcc_pll4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 000000000000..e03b6d0acdb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks and resets on
+  MSM8660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8660.h
+    include/dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 000000000000..ce1f5a60bd8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8909, MSM8917 and QM215
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8909, MSM8917 or QM215.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8909.h
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8909
+      - qcom,gcc-msm8917
+      - qcom,gcc-qm215
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 000000000000..258b6b93deca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8916 or MSM8939.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8916.h
+    include/dt-bindings/clock/qcom,gcc-msm8939.h
+    include/dt-bindings/reset/qcom,gcc-msm8916.h
+    include/dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
new file mode 100644
index 000000000000..f2e37f439d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8953
+
+maintainers:
+  - Adam Skladowski <a_skl39@protonmail.com>
+  - Sireesh Kodali <sireeshkodali@protonmail.com>
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8937 or MSM8953.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8937
+      - qcom,gcc-msm8953
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@1800000 {
+        compatible = "qcom,gcc-msm8953";
+        reg = <0x01800000 0x80000>;
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                 <&sleep_clk>,
+                 <&dsi0_phy 1>,
+                 <&dsi0_phy 0>,
+                 <&dsi1_phy 1>,
+                 <&dsi1_phy 0>;
+        clock-names = "xo",
+                      "sleep",
+                      "dsi0pll",
+                      "dsi0pllbyte",
+                      "dsi1pll",
+                      "dsi1pllbyte";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
new file mode 100644
index 000000000000..929fafc84c19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8974 (including Pro) and MSM8226
+  Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8974 (all variants) and MSM8226.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+    include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-msm8974";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 000000000000..92195091a919
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8976.
+
+  See also: include/dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
index 22e67b238bb6..93bcd61461e7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8994
+title: Qualcomm Global Clock & Reset Controller on MSM8994
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8994 and MSM8992.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8994 and MSM8992.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8994.h
+  See also: include/dt-bindings/clock/qcom,gcc-msm8994.h
 
 properties:
   compatible:
@@ -32,28 +31,16 @@ properties:
       - const: xo
       - const: sleep
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..64796f45f294 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -4,59 +4,58 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+title: Qualcomm Global Clock & Reset Controller on MSM8996
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module which provides the clocks, resets and
   power domains on MSM8996.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8996.h
+  See also: include/dt-bindings/clock/qcom,gcc-msm8996.h
 
 properties:
   compatible:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 8151c0a05649..d882f2b6620e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Global Clock & Reset Controller on MSM8998
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8998.h
+  See also: include/dt-bindings/clock/qcom,gcc-msm8998.h
 
 properties:
   compatible:
@@ -26,7 +25,6 @@ properties:
       - description: Board XO source
       - description: Sleep clock source
       - description: Audio reference clock (Optional clock)
-      - description: PLL test clock source (Optional clock)
     minItems: 2
 
   clock-names:
@@ -34,35 +32,18 @@ properties:
       - const: xo
       - const: sleep_clk
       - const: aud_ref_clk # Optional clock
-      - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -75,11 +56,9 @@ examples:
       reg = <0x00100000 0xb0000>;
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&sleep>,
-               <0>,
                <0>;
       clock-names = "xo",
                     "sleep_clk",
-                    "aud_ref_clk",
-                    "core_bi_pll_test_se";
+                    "aud_ref_clk";
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
index 5de9c8263138..b9194fa11e47 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for QCM2290
+title: Qualcomm Global Clock & Reset Controller on QCM2290
 
 maintainers:
   - Shawn Guo <shawn.guo@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets
-  and power domains on QCM2290.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCM2290.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-qcm2290.h
+  See also: include/dt-bindings/clock/qcom,gcc-qcm2290.h
 
 properties:
   compatible:
@@ -30,32 +29,16 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index ce06f3f8c3e3..6b35a3c080a2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -4,43 +4,48 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+title: Qualcomm Global Clock & Reset Controller on QCS404
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on QCS404.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS404.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-qcs404.h
+  See also: include/dt-bindings/clock/qcom,gcc-qcs404.h
 
 properties:
   compatible:
     const: qcom,gcc-qcs404
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: HDMI phy PLL clock
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: hdmi_pll
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -49,5 +54,6 @@ examples:
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
+      #power-domain-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index a404c8fbee67..e30d1df3eeb5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+title: Qualcomm Global Clock & Reset Controller on SC7180
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7180.h
+  See also: include/dt-bindings/clock/qcom,gcc-sc7180.h
 
 properties:
   compatible:
@@ -33,36 +32,26 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  power-domains:
+    items:
+      - description: CX domain
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7180";
       reg = <0x00100000 0x1f0000>;
@@ -70,6 +59,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC7180_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
index 5693b8997570..5ddaf27bb1f4 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7280
+title: Qualcomm Global Clock & Reset Controller on SC7280
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7280.h
+  See also: include/dt-bindings/clock/qcom,gcc-sc7280.h
 
 properties:
   compatible:
@@ -44,32 +43,26 @@ properties:
       - const: ufs_phy_tx_symbol_0_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+  power-domains:
+    items:
+      - description: CX domain
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7280";
       reg = <0x00100000 0x1f0000>;
@@ -85,6 +78,7 @@ examples:
                      "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
                      "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
                      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      power-domains = <&rpmhpd SC7280_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
index f03ef96e57fa..82c2ef39934d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC8180x
+title: Qualcomm Global Clock & Reset Controller on SC8180x
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC8180x.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC8180x.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc8180x.h
+  See also: include/dt-bindings/clock/qcom,gcc-sc8180x.h
 
 properties:
   compatible:
@@ -32,36 +31,26 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  power-domains:
+    items:
+      - description: CX domain
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
+  - power-domains
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc8180x";
       reg = <0x00100000 0x1f0000>;
@@ -69,6 +58,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC8180X_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 000000000000..c1eeccef66b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SC8280xp.
+
+  See also: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  power-domains:
+    items:
+      - description: CX domain
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+      power-domains = <&rpmhpd SC8280XP_CX>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
new file mode 100644
index 000000000000..724ce0491118
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660/SDM630/SDM636 Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM630, SDM636 and SDM660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM660:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,gcc-sdm660";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
index d902f137ab17..a7523a414341 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -4,63 +4,82 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SDM845
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM670 and SDM845
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdm845.h
+  See also: include/dt-bindings/clock/qcom,gcc-sdm845.h
 
 properties:
   compatible:
-    const: qcom,gcc-sdm845
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-      - description: PCIE 0 Pipe clock source
-      - description: PCIE 1 Pipe clock source
+    minItems: 3
+    maxItems: 5
 
   clock-names:
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-      - const: pcie_0_pipe_clk
-      - const: pcie_1_pipe_clk
+    minItems: 3
+    maxItems: 5
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
+  power-domains:
     maxItems: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
 
 examples:
   # Example for GCC for SDM845:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
index b0d1c65aa354..320e4f5b2b18 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SDX55
+title: Qualcomm Global Clock & Reset Controller on SDX55
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module provides the clocks, resets and
   power domains on SDX55
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdx55.h
+  See also: include/dt-bindings/clock/qcom,gcc-sdx55.h
 
 properties:
   compatible:
@@ -25,38 +24,22 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
-    minItems: 2
 
   clock-names:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
-    minItems: 2
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -65,8 +48,9 @@ examples:
       compatible = "qcom,gcc-sdx55";
       reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&sleep_clk>, <&pll_test_clk>;
-      clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 000000000000..9242e6e19139
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX65
+
+  See also: include/dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
index 26050da844d5..c926630907c5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6115 and SM4250
+title: Qualcomm Global Clock & Reset Controller on SM6115 and SM4250
 
 maintainers:
   - Iskren Chernev <iskren.chernev@gmail.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM4250/6115.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4250/6115.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6115.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm6115.h
 
 properties:
   compatible:
@@ -30,32 +29,16 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
index ab12b391effc..5bd422e94a38 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6125
+title: Qualcomm Global Clock & Reset Controller on SM6125
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6125.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6125.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6125.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm6125.h
 
 properties:
   compatible:
@@ -30,32 +29,16 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
index 20926cd8293e..819e855eaf9a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6350
+title: Qualcomm Global Clock & Reset Controller on SM6350
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6350.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm6350.h
 
 properties:
   compatible:
@@ -32,32 +31,16 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 12766a866625..5f3f69fe9ddb 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+title: Qualcomm Global Clock & Reset Controller on SM8150
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8150.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8150.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8150.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm8150.h
 
 properties:
   compatible:
@@ -31,32 +30,16 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index 80bd6caf5bc9..f4cd5a509c60 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+title: Qualcomm Global Clock & Reset Controller on SM8250
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8250.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8250.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8250.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm8250.h
 
 properties:
   compatible:
@@ -24,39 +23,25 @@ properties:
   clocks:
     items:
       - description: Board XO source
+      - description: Board active XO source
       - description: Sleep clock source
 
   clock-names:
     items:
       - const: bi_tcxo
+      - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -65,8 +50,9 @@ examples:
       compatible = "qcom,gcc-sm8250";
       reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      clock-names = "bi_tcxo", "sleep_clk";
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
index 1122700dcc2b..97ffae3b5522 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8350
+title: Qualcomm Global Clock & Reset Controller on SM8350
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8350.h
+  See also: include/dt-bindings/clock/qcom,gcc-sm8350.h
 
 properties:
   compatible:
@@ -24,7 +23,6 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
       - description: PCIE 0 Pipe clock source (Optional clock)
       - description: PCIE 1 Pipe clock source (Optional clock)
       - description: UFS card Rx symbol 0 clock source (Optional clock)
@@ -41,7 +39,6 @@ properties:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
       - const: pcie_0_pipe_clk # Optional clock
       - const: pcie_1_pipe_clk # Optional clock
       - const: ufs_card_rx_symbol_0_clk # Optional clock
@@ -54,28 +51,16 @@ properties:
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 000000000000..3169ac05e1d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8450
+
+  See also: include/dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sm8450
+      - qcom,sm8475-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxiliary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index f66d703bd913..513d6fd89249 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -4,57 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller Common Properties
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/clock/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/clock/qcom,gcc-mdm9607.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  Common bindings for Qualcomm global clock control module providing the
+  clocks, resets and power domains.
 
 properties:
-  compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
-      - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
-
   '#clock-cells':
     const: 1
 
@@ -72,22 +32,10 @@ properties:
       Protected clock specifier list as per common clock binding.
 
 required:
-  - compatible
   - reg
   - '#clock-cells'
   - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+additionalProperties: true
 
-examples:
-  # Example for GCC for MSM8960:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
-      reg = <0x900000 0x4000>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,glymur-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,glymur-dispcc.yaml
new file mode 100644
index 000000000000..45f027c70e03
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,glymur-dispcc.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,glymur-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on GLYMUR
+
+maintainers:
+  - Taniya Das <taniya.das@oss.qualcomm.com>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the MDSS instances on GLYMUR SoC.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-glymur.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,glymur-dispcc
+
+  clocks:
+    items:
+      - description: Board CXO clock
+      - description: Board sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+      - description: Standalone PHY 0 PLL link clock
+      - description: Standalone PHY 0 VCO div clock
+      - description: Standalone PHY 1 PLL link clock
+      - description: Standalone PHY 1 VCO div clock
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    clock-controller@af00000 {
+      compatible = "qcom,glymur-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss_dp_phy0 0>,
+               <&mdss_dp_phy0 1>,
+               <&mdss_dp_phy1 0>,
+               <&mdss_dp_phy1 1>,
+               <&mdss_dp_phy2 0>,
+               <&mdss_dp_phy2 1>,
+               <&mdss_dp_phy3 0>,
+               <&mdss_dp_phy3 1>,
+               <&mdss_dsi0_phy 0>,
+               <&mdss_dsi0_phy 1>,
+               <&mdss_dsi1_phy 0>,
+               <&mdss_dsi1_phy 1>,
+               <&mdss_phy0_link 0>,
+               <&mdss_phy0_vco_div 0>,
+               <&mdss_phy1_link 1>,
+               <&mdss_phy1_vco_div 1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,glymur-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,glymur-gcc.yaml
new file mode 100644
index 000000000000..b05b0e6c4483
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,glymur-gcc.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,glymur-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on Glymur SoC
+
+maintainers:
+  - Taniya Das <taniya.das@oss.qualcomm.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on Glymur SoC.
+
+  See also: include/dt-bindings/clock/qcom,glymur-gcc.h
+
+properties:
+  compatible:
+    const: qcom,glymur-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO_A source
+      - description: Sleep clock source
+      - description: USB 0 Phy DP0 GMUX clock source
+      - description: USB 0 Phy DP1 GMUX clock source
+      - description: USB 0 Phy PCIE PIPEGMUX clock source
+      - description: USB 0 Phy PIPEGMUX clock source
+      - description: USB 0 Phy SYS PCIE PIPEGMUX clock source
+      - description: USB 1 Phy DP0 GMUX 2 clock source
+      - description: USB 1 Phy DP1 GMUX 2 clock source
+      - description: USB 1 Phy PCIE PIPEGMUX clock source
+      - description: USB 1 Phy PIPEGMUX clock source
+      - description: USB 1 Phy SYS PCIE PIPEGMUX clock source
+      - description: USB 2 Phy DP0 GMUX 2 clock source
+      - description: USB 2 Phy DP1 GMUX 2 clock source
+      - description: USB 2 Phy PCIE PIPEGMUX clock source
+      - description: USB 2 Phy PIPEGMUX clock source
+      - description: USB 2 Phy SYS PCIE PIPEGMUX clock source
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: PCIe 5 pipe clock
+      - description: PCIe 6 pipe clock
+      - description: QUSB4 0 PHY RX 0 clock source
+      - description: QUSB4 0 PHY RX 1 clock source
+      - description: QUSB4 1 PHY RX 0 clock source
+      - description: QUSB4 1 PHY RX 1 clock source
+      - description: QUSB4 2 PHY RX 0 clock source
+      - description: QUSB4 2 PHY RX 1 clock source
+      - description: UFS PHY RX Symbol 0 clock source
+      - description: UFS PHY RX Symbol 1 clock source
+      - description: UFS PHY TX Symbol 0 clock source
+      - description: USB3 PHY 0 pipe clock source
+      - description: USB3 PHY 1 pipe clock source
+      - description: USB3 PHY 2 pipe clock source
+      - description: USB3 UNI PHY pipe 0 clock source
+      - description: USB3 UNI PHY pipe 1 clock source
+      - description: USB4 PHY 0 pcie pipe clock source
+      - description: USB4 PHY 0 Max pipe clock source
+      - description: USB4 PHY 1 pcie pipe clock source
+      - description: USB4 PHY 1 Max pipe clock source
+      - description: USB4 PHY 2 pcie pipe clock source
+      - description: USB4 PHY 2 Max pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,glymur-gcc";
+      reg = <0x100000 0x1f9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&usb_0_phy_dp0_gmux>,
+               <&usb_0_phy_dp1_gmux>,
+               <&usb_0_phy_pcie_pipegmux>,
+               <&usb_0_phy_pipegmux>,
+               <&usb_0_phy_sys_pcie_pipegmux>,
+               <&usb_1_phy_dp0_gmux_2>,
+               <&usb_1_phy_dp1_gmux_2>,
+               <&usb_1_phy_pcie_pipegmux>,
+               <&usb_1_phy_pipegmux>,
+               <&usb_1_phy_sys_pcie_pipegmux>,
+               <&usb_2_phy_dp0_gmux 2>,
+               <&usb_2_phy_dp1_gmux 2>,
+               <&usb_2_phy_pcie_pipegmux>,
+               <&usb_2_phy_pipegmux>,
+               <&usb_2_phy_sys_pcie_pipegmux>,
+               <&pcie_3a_pipe>, <&pcie_3b_pipe>,
+               <&pcie_4_pipe>, <&pcie_5_pipe>,
+               <&pcie_6_pipe>,
+               <&qusb4_0_phy_rx_0>, <&qusb4_0_phy_rx_1>,
+               <&qusb4_1_phy_rx_0>, <&qusb4_1_phy_rx_1>,
+               <&qusb4_2_phy_rx_0>, <&qusb4_2_phy_rx_1>,
+               <&ufs_phy_rx_symbol_0>, <&ufs_phy_rx_symbol_1>,
+               <&ufs_phy_tx_symbol_0>,
+               <&usb3_phy_0_pipe>, <&usb3_phy_1_pipe>,
+               <&usb3_phy_2_pipe>,
+               <&usb3_uni_phy_pipe_0>, <&usb3_uni_phy_pipe_1>,
+               <&usb4_phy_0_pcie_pipe>, <&usb4_phy_0_max_pipe>,
+               <&usb4_phy_1_pcie_pipe>, <&usb4_phy_1_max_pipe>,
+               <&usb4_phy_2_pcie_pipe>, <&usb4_phy_2_max_pipe>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
index 3f70eb59aae3..79bb90dbe4c1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for SDM630 and SDM660
+title: Qualcomm Graphics Clock & Reset Controller on SDM630 and SDM660
 
 maintainers:
   - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
+  Qualcomm graphics clock control module provides the clocks, resets and
   power domains on SDM630 and SDM660.
 
   See also dt-bindings/clock/qcom,gpucc-sdm660.h.
@@ -33,28 +33,16 @@ properties:
       - const: gcc_gpu_gpll0_clk
       - const: gcc_gpu_gpll0_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 46dff46d5760..4cdff6161bf0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -4,31 +4,42 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding
+title: Qualcomm Graphics Clock & Reset Controller
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,gpucc-sdm845.h
-    dt-bindings/clock/qcom,gpucc-sc7180.h
-    dt-bindings/clock/qcom,gpucc-sc7280.h
-    dt-bindings/clock/qcom,gpucc-sm8150.h
-    dt-bindings/clock/qcom,gpucc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,gpucc-sdm845.h
+    include/dt-bindings/clock/qcom,gpucc-sa8775p.h
+    include/dt-bindings/clock/qcom,gpucc-sc7180.h
+    include/dt-bindings/clock/qcom,gpucc-sc7280.h
+    include/dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    include/dt-bindings/clock/qcom,gpucc-sm6350.h
+    include/dt-bindings/clock/qcom,gpucc-sm8150.h
+    include/dt-bindings/clock/qcom,gpucc-sm8250.h
+    include/dt-bindings/clock/qcom,gpucc-sm8350.h
+    include/dt-bindings/clock/qcom,qcs8300-gpucc.h
 
 properties:
   compatible:
     enum:
+      - qcom,qcs8300-gpucc
       - qcom,sdm845-gpucc
+      - qcom,sa8775p-gpucc
       - qcom,sc7180-gpucc
       - qcom,sc7280-gpucc
       - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
       - qcom,sm8150-gpucc
       - qcom,sm8250-gpucc
+      - qcom,sm8350-gpucc
 
   clocks:
     items:
@@ -42,28 +53,28 @@ properties:
       - const: gcc_gpu_gpll0_clk_src
       - const: gcc_gpu_gpll0_div_clk_src
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
+  power-domains:
     maxItems: 1
 
+  vdd-gfx-supply:
+    description: Regulator supply for the VDD_GFX pads
+
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+# Require that power-domains and vdd-gfx-supply are not both present
+not:
+  required:
+    - power-domains
+    - vdd-gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
deleted file mode 100644
index ec02a024424c..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-High-Frequency PLL (HFPLL)
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>:
-		shall contain only one of the following. The generic
-		compatible "qcom,hfpll" should be also included.
-
-                        "qcom,hfpll-ipq8064", "qcom,hfpll"
-                        "qcom,hfpll-apq8064", "qcom,hfpll"
-                        "qcom,hfpll-msm8974", "qcom,hfpll"
-                        "qcom,hfpll-msm8960", "qcom,hfpll"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address and size of HPLL registers. An optional second
-		    element specifies the address and size of the alias
-		    register region.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the xo clock.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "xo".
-
-- clock-output-names:
-	Usage: required
-	Value type: <string>
-	Definition: Name of the PLL. Typically hfpllX where X is a CPU number
-		    starting at 0. Otherwise hfpll_Y where Y is more specific
-		    such as "l2".
-
-Example:
-
-1) An HFPLL for the L2 cache.
-
-	clock-controller@f9016000 {
-		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
-		reg = <0xf9016000 0x30>;
-		clocks = <&xo_board>;
-		clock-names = "xo";
-		clock-output-names = "hfpll_l2";
-	};
-
-2) An HFPLL for CPU0. This HFPLL has the alias register region.
-
-	clock-controller@f908a000 {
-		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
-		reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
-		clocks = <&xo_board>;
-		clock-names = "xo";
-		clock-output-names = "hfpll0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml b/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml
new file mode 100644
index 000000000000..8cb1c164f760
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,hfpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm High-Frequency PLL
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The HFPLL is used as CPU PLL on various Qualcomm SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8974-hfpll
+          - qcom,msm8976-hfpll-a53
+          - qcom,msm8976-hfpll-a72
+          - qcom,msm8976-hfpll-cci
+          - qcom,qcs404-hfpll
+      - const: qcom,hfpll
+        deprecated: true
+
+  reg:
+    items:
+      - description: HFPLL registers
+      - description: Alias register region
+    minItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  clock-output-names:
+    description:
+      Name of the PLL. Typically hfpllX where X is a CPU number starting at 0.
+      Otherwise hfpll_Y where Y is more specific such as "l2".
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f908a000 {
+        compatible = "qcom,msm8974-hfpll";
+        reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+        #clock-cells = <0>;
+        clock-output-names = "hfpll0";
+        clocks = <&xo_board>;
+        clock-names = "xo";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
new file mode 100644
index 000000000000..489d0fc5607c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5018-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5018
+
+maintainers:
+  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5018
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq5018-gcc.h
+    include/dt-bindings/reset/qcom,ipq5018-gcc.h
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq5018
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE20 PHY0 pipe clock source
+      - description: PCIE20 PHY1 pipe clock source
+      - description: USB3 PHY pipe clock source
+      - description: GEPHY RX clock source
+      - description: GEPHY TX clock source
+      - description: UNIPHY RX clock source
+      - description: UNIPHY TX clk source
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq5018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&pcie20_phy0_pipe_clk>,
+               <&pcie20_phy1_pipe_clk>,
+               <&usb3_phy0_pipe_clk>,
+               <&gephy_rx_clk>,
+               <&gephy_tx_clk>,
+               <&uniphy_rx_clk>,
+               <&uniphy_tx_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 000000000000..1230183fc0a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332 and IPQ5424
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5332 and IPQ5424.
+
+  See also:
+    include/dt-bindings/clock/qcom,gcc-ipq5332.h
+    include/dt-bindings/clock/qcom,gcc-ipq5424.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-gcc
+      - qcom,ipq5424-gcc
+
+  clocks:
+    minItems: 5
+    items:
+      - description: Board XO clock source
+      - description: Sleep clock source
+      - description: PCIE 2lane PHY pipe clock source
+      - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+      - description: USB PCIE wrapper pipe clock source
+      - description: PCIE 2-lane PHY2 pipe clock source
+      - description: PCIE 2-lane PHY3 pipe clock source
+
+  '#power-domain-cells': false
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq5332-gcc
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq5424-gcc
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq5332-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board>,
+               <&sleep_clk>,
+               <&pcie_2lane_phy_pipe_clk>,
+               <&pcie_2lane_phy_pipe_clk_x1>,
+               <&usb_pcie_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
new file mode 100644
index 000000000000..def739fa0a8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5424-apss-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5424-apss-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APSS IPQ5424 Clock Controller
+
+maintainers:
+  - Varadarajan Narayanan <quic_varada@quicinc.com>
+
+description:
+  The CPU core in ipq5424 is clocked by a huayra PLL with RCG support.
+  The RCG and PLL have a separate register space from the GCC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5424-apss-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference to the XO clock.
+      - description: Reference to the GPLL0 clock.
+
+  '#clock-cells':
+    const: 1
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+
+    apss_clk: clock-controller@fa80000 {
+      compatible = "qcom,ipq5424-apss-clk";
+      reg = <0x0fa80000 0x20000>;
+      clocks = <&xo_board>,
+               <&gcc GPLL0>;
+      #clock-cells = <1>;
+      #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
new file mode 100644
index 000000000000..817d51135fbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-cmn-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CMN PLL Clock Controller on IPQ SoC
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Luo Jie <quic_luoj@quicinc.com>
+
+description:
+  The CMN (or common) PLL clock controller expects a reference
+  input clock. This reference clock is from the on-board Wi-Fi.
+  The CMN PLL supplies a number of fixed rate output clocks to
+  the devices providing networking functions and to GCC. These
+  networking hardware include PPE (packet process engine), PCS
+  and the externally connected switch or PHY devices. The CMN
+  PLL block also outputs fixed rate clocks to GCC. The PLL's
+  primary function is to enable fixed rate output clocks for
+  networking hardware functions used with the IPQ SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5018-cmn-pll
+      - qcom,ipq5424-cmn-pll
+      - qcom,ipq9574-cmn-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The reference clock. The supported clock rates include
+          25000000, 31250000, 40000000, 48000000, 50000000 and 96000000 HZ.
+      - description: The AHB clock
+      - description: The SYS clock
+    description:
+      The reference clock is the source clock of CMN PLL, which is from the
+      Wi-Fi. The AHB and SYS clocks must be enabled to access CMN PLL
+      clock registers.
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sys
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
+    #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+
+    cmn_pll: clock-controller@9b000 {
+        compatible = "qcom,ipq9574-cmn-pll";
+        reg = <0x0009b000 0x800>;
+        clocks = <&cmn_pll_ref_clk>,
+                 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+                 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+        clock-names = "ref", "ahb", "sys";
+        #clock-cells = <1>;
+        assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
+        assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
new file mode 100644
index 000000000000..27ae9938febc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ9574
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Anusha Rao <quic_anusha@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ9574
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq9574-gcc.h
+    include/dt-bindings/reset/qcom,ipq9574-gcc.h
+
+properties:
+  compatible:
+    const: qcom,ipq9574-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Bias PLL ubi clock source
+      - description: PCIE30 PHY0 pipe clock source
+      - description: PCIE30 PHY1 pipe clock source
+      - description: PCIE30 PHY2 pipe clock source
+      - description: PCIE30 PHY3 pipe clock source
+      - description: USB3 PHY pipe clock source
+
+  '#power-domain-cells': false
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq9574-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&bias_pll_ubi_nc_clk>,
+               <&pcie30_phy0_pipe_clk>,
+               <&pcie30_phy1_pipe_clk>,
+               <&pcie30_phy2_pipe_clk>,
+               <&pcie30_phy3_pipe_clk>,
+               <&usb3phy_0_cc_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
new file mode 100644
index 000000000000..7ff4ff3587ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Networking Sub System Clock & Reset Controller on IPQ9574 and IPQ5424
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Anusha Rao <quic_anusha@quicinc.com>
+
+description: |
+  Qualcomm networking sub system clock control module provides the clocks,
+  resets on IPQ9574 and IPQ5424
+
+  See also:
+    include/dt-bindings/clock/qcom,ipq5424-nsscc.h
+    include/dt-bindings/clock/qcom,ipq9574-nsscc.h
+    include/dt-bindings/reset/qcom,ipq5424-nsscc.h
+    include/dt-bindings/reset/qcom,ipq9574-nsscc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5424-nsscc
+      - qcom,ipq9574-nsscc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: CMN_PLL NSS (Bias PLL cc) clock source. This clock rate
+          can vary for different IPQ SoCs. For example, it is 1200 MHz on the
+          IPQ9574 and 300 MHz on the IPQ5424.
+      - description: CMN_PLL PPE (Bias PLL ubi nc) clock source. The clock
+          rate can vary for different IPQ SoCs. For example, it is 353 MHz
+          on the IPQ9574 and 375 MHz on the IPQ5424.
+      - description: GCC GPLL0 OUT AUX clock source
+      - description: Uniphy0 NSS Rx clock source
+      - description: Uniphy0 NSS Tx clock source
+      - description: Uniphy1 NSS Rx clock source
+      - description: Uniphy1 NSS Tx clock source
+      - description: Uniphy2 NSS Rx clock source
+      - description: Uniphy2 NSS Tx clock source
+      - description: GCC NSSCC clock source
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: xo
+      - enum:
+          - nss_1200
+          - nss
+      - enum:
+          - ppe_353
+          - ppe
+      - const: gpll0_out
+      - const: uniphy0_rx
+      - const: uniphy0_tx
+      - const: uniphy1_rx
+      - const: uniphy1_tx
+      - const: uniphy2_rx
+      - const: uniphy2_tx
+      - const: bus
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,ipq9574-nsscc
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: xo
+            - const: nss_1200
+            - const: ppe_353
+            - const: gpll0_out
+            - const: uniphy0_rx
+            - const: uniphy0_tx
+            - const: uniphy1_rx
+            - const: uniphy1_tx
+            - const: uniphy2_rx
+            - const: uniphy2_tx
+            - const: bus
+    else:
+      properties:
+        clock-names:
+          items:
+            - const: xo
+            - const: nss
+            - const: ppe
+            - const: gpll0_out
+            - const: uniphy0_rx
+            - const: uniphy0_tx
+            - const: uniphy1_rx
+            - const: uniphy1_tx
+            - const: uniphy2_rx
+            - const: uniphy2_tx
+            - const: bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+    #include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
+    clock-controller@39b00000 {
+      compatible = "qcom,ipq9574-nsscc";
+      reg = <0x39b00000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&cmn_pll NSS_1200MHZ_CLK>,
+               <&cmn_pll PPE_353MHZ_CLK>,
+               <&gcc GPLL0_OUT_AUX>,
+               <&uniphy 0>,
+               <&uniphy 1>,
+               <&uniphy 2>,
+               <&uniphy 3>,
+               <&uniphy 4>,
+               <&uniphy 5>,
+               <&gcc GCC_NSSCC_CLK>;
+      clock-names = "xo",
+                    "nss_1200",
+                    "ppe_353",
+                    "gpll0_out",
+                    "uniphy0_rx",
+                    "uniphy0_tx",
+                    "uniphy1_rx",
+                    "uniphy1_tx",
+                    "uniphy2_rx",
+                    "uniphy2_tx",
+                    "bus";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #interconnect-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
new file mode 100644
index 000000000000..57632757d4e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-acc-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Application Clock Controller (ACC) v1
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+  There is one ACC register region per CPU within the KPSS remapped region as
+  well as an alias register region that remaps accesses to the ACC associated
+  with the CPU accessing the region. ACC v1 is currently used as a
+  clock-controller for enabling the cpu and handling the aux clocks.
+
+properties:
+  compatible:
+    const: qcom,kpss-acc-v1
+
+  reg:
+    items:
+      - description: Base address and size of the register region
+      - description: Optional base address and size of the alias register region
+    minItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  clock-output-names:
+    description: Name of the aux clock. Krait can have at most 4 cpu.
+    enum:
+      - acpu0_aux
+      - acpu1_aux
+      - acpu2_aux
+      - acpu3_aux
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2088000 {
+      compatible = "qcom,kpss-acc-v1";
+      reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      clock-output-names = "acpu0_aux";
+      #clock-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
new file mode 100644
index 000000000000..88b7672123a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Krait Processor Sub-system (KPSS) Global Clock Controller (GCC). Used
+  to control L2 mux (in the current implementation) and provide access
+  to the kpss-gcc registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+          - qcom,kpss-gcc-msm8660
+          - qcom,kpss-gcc-mdm9615
+      - const: qcom,kpss-gcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+then:
+  required:
+    - clocks
+    - clock-names
+    - '#clock-cells'
+else:
+  properties:
+    clock: false
+    clock-names: false
+    '#clock-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+      reg = <0x2011000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      #clock-cells = <0>;
+    };
+
+  - |
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+      reg = <0x02011000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
deleted file mode 100644
index 030ba60dab08..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Krait Clock Controller
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-			"qcom,krait-cc-v1"
-			"qcom,krait-cc-v2"
-
-- #clock-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the clock parents of hfpll, secondary muxes.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
-
-Example:
-
-	kraitcc: clock-controller {
-		compatible = "qcom,krait-cc-v1";
-		clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
-		clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml b/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml
new file mode 100644
index 000000000000..d6a019371fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,krait-cc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Clock Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,krait-cc-v1
+      - qcom,krait-cc-v2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: Parent clock phandle for hfpll0
+      - description: Parent clock phandle for hfpll1
+      - description: Parent clock phandle for acpu0_aux
+      - description: Parent clock phandle for acpu1_aux
+      - description: Parent clock phandle for qsb
+
+  clock-names:
+    items:
+      - const: hfpll0
+      - const: hfpll1
+      - const: acpu0_aux
+      - const: acpu1_aux
+      - const: qsb
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
deleted file mode 100644
index a3c78aa88038..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,lcc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Qualcomm LPASS Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-
-			"qcom,lcc-msm8960"
-			"qcom,lcc-apq8064"
-			"qcom,lcc-ipq8064"
-			"qcom,lcc-mdm9615"
-
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-- #reset-cells : shall contain 1
-
-Example:
-	clock-controller@28000000 {
-		compatible = "qcom,lcc-ipq8064";
-		reg = <0x28000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.yaml b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
new file mode 100644
index 000000000000..55985e562a34
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,lcc-apq8064
+      - qcom,lcc-ipq8064
+      - qcom,lcc-mdm9615
+      - qcom,lcc-msm8960
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    maxItems: 8
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-apq8064
+              - qcom,lcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-mdm9615
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board CXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: cxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+examples:
+  - |
+    clock-controller@28000000 {
+        compatible = "qcom,lcc-ipq8064";
+        reg = <0x28000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
deleted file mode 100644
index b9e9787045b9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Qualcomm LPASS Clock Controller Binding
------------------------------------------------
-
-Required properties :
-- compatible		: shall contain "qcom,sdm845-lpasscc"
-- #clock-cells		: from common clock binding, shall contain 1.
-- reg			: shall contain base register address and size,
-			  in the order
-			Index-0 maps to LPASS_CC register region
-			Index-1 maps to LPASS_QDSP6SS register region
-
-Optional properties :
-- reg-names	: register names of LPASS domain
-		 "cc", "qdsp6ss".
-
-Example:
-
-The below node has to be defined in the cases where the LPASS peripheral loader
-would bring the subsystem out of reset.
-
-	lpasscc: clock-controller@17014000 {
-		compatible = "qcom,sdm845-lpasscc";
-		reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
-		reg-names = "cc", "qdsp6ss";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-camcc.yaml
new file mode 100644
index 000000000000..f63149ecf3e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,milos-camcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on Milos
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on Milos.
+
+  See also: include/dt-bindings/clock/qcom,milos-camcc.h
+
+properties:
+  compatible:
+    const: qcom,milos-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Camera AHB clock from GCC
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,milos-gcc.h>
+    clock-controller@adb0000 {
+        compatible = "qcom,milos-camcc";
+        reg = <0x0adb0000 0x40000>;
+        clocks = <&bi_tcxo_div2>,
+                 <&sleep_clk>,
+                 <&gcc GCC_CAMERA_AHB_CLK>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-dispcc.yaml
new file mode 100644
index 000000000000..94908804756b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,milos-dispcc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on Milos
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on Milos.
+
+  See also: include/dt-bindings/clock/qcom,milos-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,milos-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Display's AHB clock
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,milos-gcc.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    clock-controller@af00000 {
+        compatible = "qcom,milos-dispcc";
+        reg = <0x0af00000 0x20000>;
+        clocks = <&bi_tcxo_div2>,
+                 <&sleep_clk>,
+                 <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                 <&mdss_dsi0_phy 0>,
+                 <&mdss_dsi0_phy 1>,
+                 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml
new file mode 100644
index 000000000000..cf244c155f9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,milos-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on Milos
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on Milos.
+
+  See also: include/dt-bindings/clock/qcom,milos-gcc.h
+
+properties:
+  compatible:
+    const: qcom,milos-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,milos-gcc";
+        reg = <0x00100000 0x1f4200>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&pcie0_phy>,
+                 <&pcie1_phy>,
+                 <&ufs_mem_phy 0>,
+                 <&ufs_mem_phy 1>,
+                 <&ufs_mem_phy 2>,
+                 <&usb_1_qmpphy>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,milos-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,milos-videocc.yaml
new file mode 100644
index 000000000000..14c31efe1308
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,milos-videocc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on Milos
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Milos.
+
+  See also: include/dt-bindings/clock/qcom,milos-videocc.h
+
+properties:
+  compatible:
+    const: qcom,milos-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: Video AHB clock from GCC
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,milos-gcc.h>
+    clock-controller@aaf0000 {
+        compatible = "qcom,milos-videocc";
+        reg = <0x0aaf0000 0x10000>;
+        clocks = <&bi_tcxo_div2>,
+                 <&bi_tcxo_ao_div2>,
+                 <&sleep_clk>,
+                 <&gcc GCC_VIDEO_AHB_CLK>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 68fdc3d4982a..53ceec9673a8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Multimedia Clock & Reset Controller Binding
+title: Qualcomm Multimedia Clock & Reset Controller
 
 maintainers:
-  - Jeffrey Hugo <jhugo@codeaurora.org>
-  - Taniya Das <tdas@codeaurora.org>
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm multimedia clock control module which supports the clocks, resets and
+  Qualcomm multimedia clock control module provides the clocks, resets and
   power domains.
 
 properties:
@@ -19,6 +19,7 @@ properties:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
       - qcom,mmcc-msm8660
       - qcom,mmcc-msm8960
       - qcom,mmcc-msm8974
@@ -30,46 +31,12 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board sleep source
-      - description: Global PLL 0 clock
-      - description: DSI phy instance 0 dsi clock
-      - description: DSI phy instance 0 byte clock
-      - description: DSI phy instance 1 dsi clock
-      - description: DSI phy instance 1 byte clock
-      - description: HDMI phy PLL clock
-      - description: DisplayPort phy PLL vco clock
-      - description: DisplayPort phy PLL link clock
+    minItems: 7
+    maxItems: 13
 
   clock-names:
-    items:
-      - const: xo
-      - const: sleep
-      - const: gpll0
-      - const: dsi0dsi
-      - const: dsi0byte
-      - const: dsi1dsi
-      - const: dsi1byte
-      - const: hdmipll
-      - const: dpvco
-      - const: dplink
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding
+    minItems: 7
+    maxItems: 13
 
   vdd-gfx-supply:
     description:
@@ -77,23 +44,294 @@ properties:
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
+            - description: LVDS PLL clock
+
+        clock-names:
+          minItems: 8
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+            - const: lvdspll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8226
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8974
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8084
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: mmss_gpll0_vote
+            - const: gpll0
+            - const: gpll0_vote
+            - const: gpll1
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Global PLL 0 DIV clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: gpll0_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,mmcc-msm8998
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
 
-then:
-  required:
-    - clocks
-    - clock-names
+unevaluatedProperties: false
 
 examples:
   # Example for MMCC for MSM8960:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
index a20cb10636dd..fcace96c72eb 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -26,22 +26,20 @@ properties:
 
   clocks:
     items:
-      - description: Primary PLL clock for power cluster (little)
-      - description: Primary PLL clock for perf cluster (big)
-      - description: Alternate PLL clock for power cluster (little)
-      - description: Alternate PLL clock for perf cluster (big)
+      - description: XO source
+      - description: SYS APCS AUX clock
 
   clock-names:
     items:
-      - const: pwrcl_pll
-      - const: perfcl_pll
-      - const: pwrcl_alt_pll
-      - const: perfcl_alt_pll
+      - const: xo
+      - const: sys_apcs_aux
 
 required:
   - compatible
   - reg
   - '#clock-cells'
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -51,4 +49,7 @@ examples:
         compatible = "qcom,msm8996-apcc";
         reg = <0x6400000 0x90000>;
         #clock-cells = <1>;
+
+        clocks = <&xo_board>, <&apcs_glb>;
+        clock-names = "xo", "sys_apcs_aux";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
new file mode 100644
index 000000000000..0dfbd8c4d465
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-cbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Core Bus Fabric (CBF) clock controller
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: >
+  The clock controller for the Qualcomm MSM8996 CBF clock, which drives the
+  interconnect between two CPU clusters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-cbf
+      - qcom,msm8996pro-cbf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  '#clock-cells':
+    const: 0
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@9a11000 {
+        compatible = "qcom,msm8996-cbf";
+        reg = <0x09a11000 0x10000>;
+        clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+        #clock-cells = <0>;
+        #interconnect-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index d747bb58f0a7..374de7a6f8d9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Graphics Clock & Reset Controller on MSM8998
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also dt-bindings/clock/qcom,gpucc-msm8998.h.
+  See also: include/dt-bindings/clock/qcom,gpucc-msm8998.h
 
 properties:
   compatible:
@@ -29,28 +29,16 @@ properties:
       - const: xo
       - const: gpll0
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
index bbaaf1e2a203..e0f4d692728c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
@@ -7,11 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Q6SSTOP clock Controller
 
 maintainers:
-  - Govind Singh <govinds@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 properties:
   compatible:
-    const: "qcom,qcs404-q6sstopcc"
+    const: qcom,qcs404-q6sstopcc
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
new file mode 100644
index 000000000000..61473385da2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Luo Jie <quic_luoj@quicinc.com>
+
+description: |
+  Qualcomm NSS clock control module provides the clocks and resets
+  on QCA8386(switch mode)/QCA8084(PHY mode)
+
+  See also::
+    include/dt-bindings/clock/qcom,qca8k-nsscc.h
+    include/dt-bindings/reset/qcom,qca8k-nsscc.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,qca8084-nsscc
+      - items:
+          - enum:
+              - qcom,qca8082-nsscc
+              - qcom,qca8085-nsscc
+              - qcom,qca8384-nsscc
+              - qcom,qca8385-nsscc
+              - qcom,qca8386-nsscc
+          - const: qcom,qca8084-nsscc
+
+  clocks:
+    items:
+      - description: Chip reference clock source
+      - description: UNIPHY0 RX 312P5M/125M clock source
+      - description: UNIPHY0 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M/125M clock source
+      - description: UNIPHY1 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M clock source
+      - description: UNIPHY1 TX 312P5M clock source
+
+  reg:
+    items:
+      - description: MDIO bus address for Clock & Reset Controller register
+
+  reset-gpios:
+    description: GPIO connected to the chip
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@18 {
+        compatible = "qcom,qca8084-nsscc";
+        reg = <0x18>;
+        reset-gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+        clocks = <&pcs0_pll>,
+                 <&qca8k_uniphy0_rx>,
+                 <&qca8k_uniphy0_tx>,
+                 <&qca8k_uniphy1_rx>,
+                 <&qca8k_uniphy1_tx>,
+                 <&qca8k_uniphy1_rx312p5m>,
+                 <&qca8k_uniphy1_tx312p5m>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 000000000000..4a533b45eec2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on qcm2290.
+
+  See also: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml
new file mode 100644
index 000000000000..734880805c1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,qcm2290-gpucc.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-gpucc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required CX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,qcm2290-gpucc";
+            reg = <0x0 0x05990000 0x0 0x9000>;
+            clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+            required-opps = <&rpmpd_opp_low_svs>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs404-turingcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs404-turingcc.yaml
new file mode 100644
index 000000000000..033e010754a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs404-turingcc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs404-turingcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Turing Clock & Reset Controller on QCS404
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,qcs404-turingcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    clock-controller@800000 {
+        compatible = "qcom,qcs404-turingcc";
+        reg = <0x00800000 0x30000>;
+        clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs615-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs615-dispcc.yaml
new file mode 100644
index 000000000000..d566f19beb0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs615-dispcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCS615
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on QCS615.
+
+  See also: include/dt-bindings/clock/qcom,qcs615-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,qcs615-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 clock source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Display port PLL link clock
+      - description: Display port PLL VCO DIV clock
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+    clock-controller@af00000 {
+      compatible = "qcom,qcs615-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&mdss_dsi0_phy 0>,
+               <&mdss_dsi0_phy 1>,
+               <&mdss_dsi1_phy 0>,
+               <&mdss_dp_phy 0>,
+               <&mdss_dp_vco 0>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml
new file mode 100644
index 000000000000..4a828e102d25
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs615-gcc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCS615
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS615.
+
+  See also: include/dt-bindings/clock/qcom,qcs615-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qcs615-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qcs615-gcc";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs615-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs615-gpucc.yaml
new file mode 100644
index 000000000000..5f7d83d1a7be
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs615-gpucc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on QCS615
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on QCS615 Qualcomm SoCs.
+
+  See also: include/dt-bindings/clock/qcom,qcs615-gpucc.h
+
+properties:
+  compatible:
+    const: qcom,qcs615-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 GPUCC div branch source
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+
+    clock-controller@5090000 {
+      compatible = "qcom,qcs615-gpucc";
+      reg = <0x5090000 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GPLL0>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs615-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs615-videocc.yaml
new file mode 100644
index 000000000000..f51b69de1047
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs615-videocc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on QCS615
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides clocks, resets and power
+  domains on QCS615 Qualcomm SoCs.
+
+  See also: include/dt-bindings/clock/qcom,qcs615-videocc.h
+
+properties:
+  compatible:
+    const: qcom,qcs615-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+
+    clock-controller@ab00000 {
+      compatible = "qcom,qcs615-videocc";
+      reg = <0xab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcs8300-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcs8300-gcc.yaml
new file mode 100644
index 000000000000..081bc452081f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcs8300-gcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs8300-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Global Clock & Reset Controller on QCS8300
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm Technologies, Inc. Global clock control module provides the clocks, resets and
+  power domains on QCS8300
+
+  See also: include/dt-bindings/clock/qcom,qcs8300-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qcs8300-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE Phy Auxiliary clock source
+      - description: First EMAC controller reference clock
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qcs8300-gcc";
+      reg = <0x00100000 0xc7018>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&pcie_0_pipe_clk>,
+               <&pcie_1_pipe_clk>,
+               <&pcie_phy_aux_clk>,
+               <&rxc0_ref_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&usb3_phy_wrapper_gcc_usb30_prim_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml
new file mode 100644
index 000000000000..3038307ff2c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-ecpricc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ECPRI Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control
+  module which supports the clocks, resets on QDU1000 and QRU1000
+
+  See also: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-ecpricc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL1 source from GCC
+      - description: GPLL2 source from GCC
+      - description: GPLL3 source from GCC
+      - description: GPLL4 source from GCC
+      - description: GPLL5 source from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@280000 {
+      compatible = "qcom,qdu1000-ecpricc";
+      reg = <0x00280000 0x31c00>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+               <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
new file mode 100644
index 000000000000..2c5a9ef4fe4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QDU1000 and QRU1000
+
+  See also: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qdu1000-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 0 Phy Auxiliary clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qdu1000-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>,
+               <&usb3_phy_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
deleted file mode 100644
index da295c3c004b..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Qualcomm RPM Clock Controller Binding
-------------------------------------------------
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-Required properties :
-- compatible : shall contain only one of the following. The generic
-               compatible "qcom,rpmcc" should be also included.
-
-			"qcom,rpmcc-mdm9607", "qcom,rpmcc"
-			"qcom,rpmcc-msm8660", "qcom,rpmcc"
-			"qcom,rpmcc-apq8060", "qcom,rpmcc"
-			"qcom,rpmcc-msm8226", "qcom,rpmcc"
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8936", "qcom,rpmcc"
-			"qcom,rpmcc-msm8953", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-msm8976", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
-			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
-			"qcom,rpmcc-msm8992",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8994",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8996", "qcom,rpmcc"
-			"qcom,rpmcc-msm8998", "qcom,rpmcc"
-			"qcom,rpmcc-qcm2290", "qcom,rpmcc"
-			"qcom,rpmcc-qcs404", "qcom,rpmcc"
-			"qcom,rpmcc-sdm660", "qcom,rpmcc"
-			"qcom,rpmcc-sm6115", "qcom,rpmcc"
-			"qcom,rpmcc-sm6125", "qcom,rpmcc"
-
-- #clock-cells : shall contain 1
-
-The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
-and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
-is an "active" clock, which means that the consumer only care that the
-clock is available when the apps CPU subsystem is active, i.e. not
-suspended or in deep idle. If it is important that the clock keeps running
-during system suspend, you need to specify the non-active clock, the one
-not containing *_A_* in the enumerator name.
-
-Example:
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 000000000000..ab97d4b7dba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8917
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8937
+          - qcom,rpmcc-msm8940
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm429
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8917
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8937
+              - qcom,rpmcc-msm8940
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm429
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916", "qcom,smd-rpm";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 72212970e6f5..3f5f1336262e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. RPMh Clocks Bindings
+title: Qualcomm Technologies, Inc. RPMh Clocks
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
   Resource Power Manager Hardened (RPMh) manages shared resources on
@@ -17,15 +17,32 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,glymur-rpmh-clk
+      - qcom,kaanapali-rpmh-clk
+      - qcom,milos-rpmh-clk
+      - qcom,qcs615-rpmh-clk
+      - qcom,qdu1000-rpmh-clk
+      - qcom,sa8775p-rpmh-clk
+      - qcom,sar2130p-rpmh-clk
       - qcom,sc7180-rpmh-clk
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
+      - qcom,sdx75-rpmh-clk
+      - qcom,sm4450-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
       - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
+      - qcom,sm8550-rpmh-clk
+      - qcom,sm8650-rpmh-clk
+      - qcom,sm8750-rpmh-clk
+      - qcom,x1e80100-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-camcc.yaml
new file mode 100644
index 000000000000..f42ccb6627a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-camcc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SA8775P
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SA8775p.
+
+  See also:
+    include/dt-bindings/clock/qcom,qcs8300-camcc.h
+    include/dt-bindings/clock/qcom,sa8775p-camcc.h
+    include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs8300-camcc
+      - qcom,sa8775p-camcc
+      - qcom,sc8280xp-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description: MMCX power domain
+
+  required-opps:
+    description:
+      OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc8280xp-camcc
+    then:
+      required:
+        - required-opps
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sa8775p-camcc";
+      reg = <0x0ade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SA8775P_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-dispcc.yaml
new file mode 100644
index 000000000000..ce61755e62d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-dispcc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SA8775P
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SA8775P.
+
+  See also: include/dt-bindings/clock/qcom,sa8775p-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-dispcc0
+      - qcom,sa8775p-dispcc1
+
+  clocks:
+    items:
+      - description: GCC AHB clock source
+      - description: Board XO source
+      - description: Board XO_AO source
+      - description: Sleep clock source
+      - description: Link clock from DP0 PHY
+      - description: VCO DIV clock from DP0 PHY
+      - description: Link clock from DP1 PHY
+      - description: VCO DIV clock from DP1 PHY
+      - description: Byte clock from DSI0 PHY
+      - description: Pixel clock from DSI0 PHY
+      - description: Byte clock from DSI1 PHY
+      - description: Pixel clock from DSI1 PHY
+
+  power-domains:
+    maxItems: 1
+    description: MMCX power domain
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sa8775p-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&dp_phy0 0>,
+               <&dp_phy0 1>,
+               <&dp_phy1 2>,
+               <&dp_phy1 3>,
+               <&dsi_phy0 0>,
+               <&dsi_phy0 1>,
+               <&dsi_phy1 2>,
+               <&dsi_phy1 3>;
+      power-domains = <&rpmhpd SA8775P_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
new file mode 100644
index 000000000000..c641aac8c451
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on sa8775p.
+
+  See also: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sa8775p-gcc
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB3 PHY wrapper pipe clock
+      - description: Secondary USB3 PHY wrapper pipe clock
+      - description: PCIe 0 pipe clock
+      - description: PCIe 1 pipe clock
+      - description: PCIe PHY clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 240
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    gcc: clock-controller@100000 {
+        compatible = "qcom,sa8775p-gcc";
+        reg = <0x100000 0xc7018>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&ufs_phy_rx_symbol_0_clk>,
+                 <&ufs_phy_rx_symbol_1_clk>,
+                 <&ufs_phy_tx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_1_clk>,
+                 <&ufs_card_tx_symbol_0_clk>,
+                 <&usb_0_ssphy>,
+                 <&usb_1_ssphy>,
+                 <&pcie_0_pipe_clk>,
+                 <&pcie_1_pipe_clk>,
+                 <&pcie_phy_pipe_clk>,
+                 <&rxc0_ref_clk>,
+                 <&rxc1_ref_clk>;
+        power-domains = <&rpmhpd SA8775P_CX>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-videocc.yaml
new file mode 100644
index 000000000000..07e5d811d816
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-videocc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SA8775P
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SA8775P.
+
+  See also: include/dt-bindings/clock/qcom,sa8775p-videocc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs8300-videocc
+      - qcom,sa8775p-videocc
+
+  clocks:
+    items:
+      - description: Video AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep Clock source
+
+  power-domains:
+    maxItems: 1
+    description: MMCX power domain
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    videocc: clock-controller@abf0000 {
+      compatible = "qcom,sa8775p-videocc";
+      reg = <0x0abf0000 0x10000>;
+      clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SA8775P_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sar2130p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sar2130p-gcc.yaml
new file mode 100644
index 000000000000..9a430bbd872a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sar2130p-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sar2130p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sar2130p
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on sar2130p.
+
+  See also: include/dt-bindings/clock/qcom,sar2130p-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sar2130p-gcc
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: PCIe 0 pipe clock
+      - description: PCIe 1 pipe clock
+      - description: Primary USB3 PHY wrapper pipe clock
+
+  protected-clocks:
+    maxItems: 240
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    gcc: clock-controller@100000 {
+        compatible = "qcom,sar2130p-gcc";
+        reg = <0x100000 0x1f4200>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&pcie_0_pipe_clk>,
+                 <&pcie_1_pipe_clk>,
+                 <&usb_0_ssphy>;
+        power-domains = <&rpmhpd RPMHPD_CX>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
index f49027edfc44..98ee9be84794 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -4,17 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+title: Qualcomm Camera Clock & Reset Controller on SC7180
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,camcc-sc7180.h
+  See also: include/dt-bindings/clock/qcom,camcc-sc7180.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
@@ -32,28 +34,15 @@ properties:
       - const: iface
       - const: xo
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index e94847f92770..f147d06ad2ef 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7180
+title: Qualcomm Display Clock & Reset Controller on SC7180
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7180.h.
+  See also: include/dt-bindings/clock/qcom,dispcc-sc7180.h
 
 properties:
   compatible:
@@ -37,28 +37,16 @@ properties:
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
index c54172fbf29f..ad360debef7c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+title: Qualcomm LPASS Core Clock Controller on SC7180
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm LPASS core clock control module which supports the clocks and
-  power domains on SC7180.
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+  See also: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
deleted file mode 100644
index 970030986a86..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
+++ /dev/null
@@ -1,62 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Modem Clock Controller Binding for SC7180
-
-maintainers:
-  - Taniya Das <tdas@codeaurora.org>
-
-description: |
-  Qualcomm modem clock control module which supports the clocks on SC7180.
-
-  See also:
-  - dt-bindings/clock/qcom,mss-sc7180.h
-
-properties:
-  compatible:
-    const: qcom,sc7180-mss
-
-  clocks:
-    items:
-      - description: gcc_mss_mfab_axi clock from GCC
-      - description: gcc_mss_nav_axi clock from GCC
-      - description: gcc_mss_cfg_ahb clock from GCC
-
-  clock-names:
-    items:
-      - const: gcc_mss_mfab_axis
-      - const: gcc_mss_nav_axi
-      - const: cfg_ahb
-
-  '#clock-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    clock-controller@41a8000 {
-      compatible = "qcom,sc7180-mss";
-      reg = <0x041a8000 0x8000>;
-      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-               <&gcc GCC_MSS_NAV_AXI_CLK>,
-               <&gcc GCC_MSS_CFG_AHB_CLK>;
-      clock-names = "gcc_mss_mfab_axis",
-                    "gcc_mss_nav_axi",
-                    "cfg_ahb";
-      #clock-cells = <1>;
-    };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
index f27ca6f03ffa..2f28be58e82e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
@@ -4,16 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SC7280
+title: Qualcomm Camera Clock & Reset Controller on SC7280
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
+  Qualcomm camera clock control module provides the clocks, resets and
   power domains on SC7280.
 
-  See also dt-bindings/clock/qcom,camcc-sc7280.h
+  See also: include/dt-bindings/clock/qcom,camcc-sc7280.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
@@ -31,28 +34,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
   reg:
     maxItems: 1
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
index 2178666fb697..95b1e4f48c4f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7280
+title: Qualcomm Display Clock & Reset Controller on SC7280
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7280.h.
+  See also: include/dt-bindings/clock/qcom,dispcc-sc7280.h
 
 properties:
   compatible:
@@ -41,28 +41,16 @@ properties:
       - const: edp_phy_pll_link_clk
       - const: edp_phy_pll_vco_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
index 47028d7b98e4..a90961d8656c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core Clock Controller Binding for SC7280
+title: Qualcomm LPASS Core Clock Controller on SC7280
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm LPASS core clock control module which supports the clocks and
-  power domains on SC7280.
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,lpass-sc7280.h
+  See also: include/dt-bindings/clock/qcom,lpass-sc7280.h
 
 properties:
   compatible:
@@ -36,13 +35,17 @@ properties:
     items:
       - description: LPASS qdsp6ss register
       - description: LPASS top-cc register
-      - description: LPASS cc register
 
   reg-names:
     items:
       - const: qdsp6ss
       - const: top_cc
-      - const: cc
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      remoteproc peripheral loader.
+    type: boolean
 
 required:
   - compatible
@@ -59,10 +62,11 @@ examples:
     #include <dt-bindings/clock/qcom,lpass-sc7280.h>
     clock-controller@3000000 {
       compatible = "qcom,sc7280-lpasscc";
-      reg = <0x03000000 0x40>, <0x03c04000 0x4>, <0x03389000 0x24>;
-      reg-names = "qdsp6ss", "top_cc", "cc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
       clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
       clock-names = "iface";
+      qcom,adsp-pil-mode;
       #clock-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..99ab9106009f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks and
+  power domains on SC7280.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+    include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcm6490-lpassaudiocc
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm6490-lpassaudiocc
+              - qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml
new file mode 100644
index 000000000000..477ee687520e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8180x-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC8180X
+
+maintainers:
+  - Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SC8180X.
+
+  See also: include/dt-bindings/clock/qcom,sc8180x-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sc8180x-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc8180x-camcc";
+      reg = <0x0ad00000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SC8180X_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
new file mode 100644
index 000000000000..273d66e245c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks,
+  and reset on SC8280XP.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sc8280xp-lpassaudiocc
+          - qcom,sc8280xp-lpasscc
+      - items:
+          - const: qcom,x1e80100-lpassaudiocc
+          - const: qcom,sc8280xp-lpassaudiocc
+      - items:
+          - const: qcom,x1e80100-lpasscc
+          - const: qcom,sc8280xp-lpasscc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpass_audiocc: clock-controller@32a9000 {
+        compatible = "qcom,sc8280xp-lpassaudiocc";
+        reg = <0x032a9000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpasscc: clock-controller@33e0000 {
+        compatible = "qcom,sc8280xp-lpasscc";
+        reg = <0x033e0000 0x12000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 000000000000..6214e41eec1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also: include/dt-bindings/clock/qcom,camcc-sm845.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,sdm670-camcc
+          - const: qcom,sdm845-camcc
+      - const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d042..854c391c8307 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+title: Qualcomm Display Clock & Reset Controller on SDM845
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SDM845.
 
-  See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+  See also: include/dt-bindings/clock/qcom,dispcc-sdm845.h
 
 properties:
   compatible:
@@ -46,28 +46,16 @@ properties:
       - const: dp_link_clk_divsel_ten
       - const: dp_vco_divided_clk_src_mux
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
new file mode 100644
index 000000000000..f9feb7049b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 LPASS Clock Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
+
+  See also: include/dt-bindings/clock/qcom,lpass-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-lpasscc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cc
+      - const: qdsp6ss
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@17014000 {
+        compatible = "qcom,sdm845-lpasscc";
+        reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+        reg-names = "cc", "qdsp6ss";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
new file mode 100644
index 000000000000..29a0b29bcb81
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX75
+
+maintainers:
+  - Imran Shaik <quic_imrashai@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX75
+
+  See also: include/dt-bindings/clock/qcom,sdx75-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sdx75-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: EMAC0 sgmiiphy mac rclk source
+      - description: EMAC0 sgmiiphy mac tclk source
+      - description: EMAC0 sgmiiphy rclk source
+      - description: EMAC0 sgmiiphy tclk source
+      - description: EMAC1 sgmiiphy mac rclk source
+      - description: EMAC1 sgmiiphy mac tclk source
+      - description: EMAC1 sgmiiphy rclk source
+      - description: EMAC1 sgmiiphy tclk source
+      - description: PCIE20 phy aux clock source
+      - description: PCIE_1 Pipe clock source
+      - description: PCIE_2 Pipe clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@80000 {
+      compatible = "qcom,sdx75-gcc";
+      reg = <0x80000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>,
+               <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>,
+               <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>,
+               <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>,
+               <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml
new file mode 100644
index 000000000000..70f025b26736
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also: include/dt-bindings/clock/qcom,sm4450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera AHB clock source from GCC
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm4450-camcc";
+      reg = <0x0ade0000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml
new file mode 100644
index 000000000000..d977788bdc8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also: include/dt-bindings/clock/qcom,sm4450-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Display AHB clock source from GCC
+      - description: sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm4450-gcc.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm4450-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy_pll_out_byteclk>,
+               <&dsi0_phy_pll_out_dsiclk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml
new file mode 100644
index 000000000000..9cfe859bacc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm4450-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM4450
+
+maintainers:
+  - Ajit Pandey <quic_ajipan@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4450
+
+  See also: include/dt-bindings/clock/qcom,sm4450-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm4450-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm4450-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&ufs_mem_phy 0>, <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>, <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 000000000000..b31424306f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6115.
+
+  See also: include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
new file mode 100644
index 000000000000..104ba10ca573
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6115
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also: include/dt-bindings/clock/qcom,sm6115-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 main div source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6115-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml
new file mode 100644
index 000000000000..8cbab3fbb660
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SM6115
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm LPASS core and audio clock controllers provide audio-related resets
+  on SM6115 and its derivatives.
+
+  See also::
+    include/dt-bindings/clock/qcom,sm6115-lpasscc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-lpassaudiocc
+      - qcom,sm6115-lpasscc
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    lpass_audiocc: clock-controller@a6a9000 {
+        compatible = "qcom,sm6115-lpassaudiocc";
+        reg = <0x0a6a9000 0x1000>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
new file mode 100644
index 000000000000..12d6f0cdbcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6125-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks and power domains on
+  Qualcomm SoCs.
+
+  See also: include/dt-bindings/clock/qcom,sm6125-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6125-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>;
+            #clock-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
new file mode 100644
index 000000000000..e31cd4300f7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and  power
+  domains on SM6350 and QCS615 SoC.
+
+  See also:
+    include/dt-bindings/clock/qcom,qcs615-camcc.h
+    include/dt-bindings/clock/qcom,sm6350-camcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs615-camcc
+      - qcom,sm6350-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm6350-camcc";
+      reg = <0x0ad00000 0x16000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
new file mode 100644
index 000000000000..519ea76cb052
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6375.
+
+  See also: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6375-dispcc";
+      reg = <0x05f00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 000000000000..66dfa72fa975
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6375
+
+  See also: include/dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
new file mode 100644
index 000000000000..3aad6b5bb1c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also: include/dt-bindings/clock/qcom,sm6375-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6375-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+      - description: SNoC DVM GFX source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the VDD_GX power rail
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required VDD_GX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6375-gpucc";
+            reg = <0 0x05990000 0 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+                     <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+            power-domains = <&rpmpd SM6375_VDDGX>;
+            required-opps = <&rpmpd_opp_low_svs>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml
new file mode 100644
index 000000000000..b96091c28c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also: include/dt-bindings/clock/qcom,sm7150-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm7150-camcc";
+      reg = <0xad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml
new file mode 100644
index 000000000000..13ab3359b592
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also: include/dt-bindings/clock/qcom,sm7150-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: GPLL0 source from GCC
+      - description: Sleep clock source
+      - description: Byte clock from MDSS DSI PHY0
+      - description: Pixel clock from MDSS DSI PHY0
+      - description: Byte clock from MDSS DSI PHY1
+      - description: Pixel clock from MDSS DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm7150-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm7150-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&sleep_clk>,
+               <&mdss_dsi0_phy 0>,
+               <&mdss_dsi0_phy 1>,
+               <&mdss_dsi1_phy 0>,
+               <&mdss_dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
new file mode 100644
index 000000000000..3878808f811e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM7150
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <davidwronek@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM7150
+
+  See also: include/dt-bindings/clock/qcom,sm7150-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm7150-gcc";
+      reg = <0x00100000 0x001f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml
new file mode 100644
index 000000000000..9f7928730386
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also: include/dt-bindings/clock/qcom,videocc-sm7150.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    videocc: clock-controller@ab00000 {
+      compatible = "qcom,sm7150-videocc";
+      reg = <0x0ab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
new file mode 100644
index 000000000000..a55e30a4975e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8150
+
+maintainers:
+  - Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SM8150.
+
+  See also: include/dt-bindings/clock/qcom,sm8150-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8150-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera AHB clock from GCC
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8150-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>;
+      power-domains = <&rpmhpd SM8150_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 000000000000..5c2ecec0624e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sm8350.h
+    include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-videocc
+      - qcom,sm8350-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Board sleep clock
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    clock-controller@abf0000 {
+      compatible = "qcom,sm8350-videocc";
+      reg = <0x0abf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 000000000000..c1e06f39431e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+  - Jagadeesh Kona <quic_jkona@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-camcc.h
+    include/dt-bindings/clock/qcom,sm8550-camcc.h
+    include/dt-bindings/clock/qcom,sm8650-camcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-camcc
+      - qcom,sm8475-camcc
+      - qcom,sm8550-camcc
+      - qcom,sm8650-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    description:
+      Power domains required for the clock controller to operate
+    items:
+      - description: MMCX power domain
+      - description: MXC power domain
+
+  required-opps:
+    description:
+      OPP nodes that describe required performance points on power domains
+    items:
+      - description: MMCX performance point
+      - description: MXC performance point
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-camcc
+              - qcom,sm8450-camcc
+              - qcom,sm8550-camcc
+    then:
+      required:
+        - required-opps
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>,
+                      <&rpmhpd RPMHPD_MXC>;
+      required-opps = <&rpmhpd_opp_low_svs>,
+                      <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 000000000000..bd131a1ff165
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also: include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+      - qcom,sm8475-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
new file mode 100644
index 000000000000..44380f6f8136
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM8450
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,milos-gpucc.h
+    include/dt-bindings/clock/qcom,sar2130p-gpucc.h
+    include/dt-bindings/clock/qcom,sm4450-gpucc.h
+    include/dt-bindings/clock/qcom,sm8450-gpucc.h
+    include/dt-bindings/clock/qcom,sm8550-gpucc.h
+    include/dt-bindings/reset/qcom,sm8450-gpucc.h
+    include/dt-bindings/reset/qcom,sm8650-gpucc.h
+    include/dt-bindings/reset/qcom,x1e80100-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,milos-gpucc
+      - qcom,sar2130p-gpucc
+      - qcom,sm4450-gpucc
+      - qcom,sm8450-gpucc
+      - qcom,sm8475-gpucc
+      - qcom,sm8550-gpucc
+      - qcom,sm8650-gpucc
+      - qcom,x1e80100-gpucc
+      - qcom,x1p42100-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8450-gpucc";
+            reg = <0 0x03d90000 0 0xa000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
new file mode 100644
index 000000000000..b31bd8335529
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM8450
+
+maintainers:
+  - Taniya Das <taniya.das@oss.qualcomm.com>
+  - Jagadeesh Kona <quic_jkona@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-videocc.h
+    include/dt-bindings/clock/qcom,sm8650-videocc.h
+    include/dt-bindings/clock/qcom,sm8750-videocc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-videocc
+      - qcom,sm8475-videocc
+      - qcom,sm8550-videocc
+      - qcom,sm8650-videocc
+      - qcom,sm8750-videocc
+      - qcom,x1e80100-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Video AHB clock from GCC
+
+  power-domains:
+    description:
+      Power domains required for the clock controller to operate
+    items:
+      - description: MMCX power domain
+      - description: MXC power domain
+
+  required-opps:
+    description:
+      OPP nodes that describe required performance points on power domains
+    items:
+      - description: MMCX performance point
+      - description: MXC performance point
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-videocc
+              - qcom,sm8550-videocc
+              - qcom,sm8750-videocc
+    then:
+      required:
+        - required-opps
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    videocc: clock-controller@aaf0000 {
+      compatible = "qcom,sm8450-videocc";
+      reg = <0x0aaf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_VIDEO_AHB_CLK>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>,
+                      <&rpmhpd RPMHPD_MXC>;
+      required-opps = <&rpmhpd_opp_low_svs>,
+                      <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
new file mode 100644
index 000000000000..30e4b4631575
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8550, SM8650, SM8750 and few other platforms.
+
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8750-dispcc.h
+  - include/dt-bindings/clock/qcom,x1e80100-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sar2130p-dispcc
+      - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
+      - qcom,sm8750-dispcc
+      - qcom,x1e80100-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8550-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
new file mode 100644
index 000000000000..c4e9b9bb63f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8550
+
+  See also: include/dt-bindings/clock/qcom,sm8550-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8550-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8550-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
new file mode 100644
index 000000000000..784fef830681
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TCSR Clock Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Taniya Das <taniya.das@oss.qualcomm.com>
+
+description: |
+  Qualcomm TCSR clock control module provides the clocks, resets and
+  power domains on SM8550
+
+  See also:
+  - include/dt-bindings/clock/qcom,glymur-tcsr.h
+  - include/dt-bindings/clock/qcom,sm8550-tcsr.h
+  - include/dt-bindings/clock/qcom,sm8650-tcsr.h
+  - include/dt-bindings/clock/qcom,sm8750-tcsr.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,glymur-tcsr
+          - qcom,kaanapali-tcsr
+          - qcom,milos-tcsr
+          - qcom,sar2130p-tcsr
+          - qcom,sm8550-tcsr
+          - qcom,sm8650-tcsr
+          - qcom,sm8750-tcsr
+          - qcom,x1e80100-tcsr
+      - const: syscon
+
+  clocks:
+    items:
+      - description: TCXO pad clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@1fc0000 {
+      compatible = "qcom,sm8550-tcsr", "syscon";
+      reg = <0x1fc0000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml
new file mode 100644
index 000000000000..c7143e2abc80
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8650-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8650
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8650
+
+  See also: include/dt-bindings/clock/qcom,sm8650-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8650-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8650-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml
new file mode 100644
index 000000000000..0114d347b26f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8750-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8750
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8750
+
+  See also:
+    include/dt-bindings/clock/qcom,kaanapali-gcc.h
+    include/dt-bindings/clock/qcom,sm8750-gcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,kaanapali-gcc
+      - qcom,sm8750-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8750-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_phy>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
deleted file mode 100644
index 7474aba36607..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
-
-clkdiv configures the clock frequency of a set of outputs on the PMIC.
-These clocks are typically wired through alternate functions on
-gpio pins.
-
-=======================
-Properties
-=======================
-
-- compatible
-	Usage:      required
-	Value type: <string>
-	Definition: must be "qcom,spmi-clkdiv".
-
-- reg
-	Usage:      required
-	Value type: <prop-encoded-array>
-	Definition: base address of CLKDIV peripherals.
-
-- qcom,num-clkdivs
-	Usage:      required
-	Value type: <u32>
-	Definition: number of CLKDIV peripherals.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the xo clock.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "xo".
-
-- #clock-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: shall contain 1.
-
-=======
-Example
-=======
-
-pm8998_clk_divs: clock-controller@5b00 {
-	compatible = "qcom,spmi-clkdiv";
-	reg = <0x5b00>;
-	#clock-cells = <1>;
-	qcom,num-clkdivs = <3>;
-	clocks = <&xo_board>;
-	clock-names = "xo";
-
-	assigned-clocks = <&pm8998_clk_divs 1>,
-			  <&pm8998_clk_divs 2>,
-			  <&pm8998_clk_divs 3>;
-	assigned-clock-rates = <9600000>,
-			       <9600000>,
-			       <9600000>;
-};
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
new file mode 100644
index 000000000000..16c95ad6c9d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC clock divider
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of
+  outputs on the PMIC.  These clocks are typically wired through alternate
+  functions on GPIO pins.
+
+properties:
+  compatible:
+    const: qcom,spmi-clkdiv
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: xo
+
+  "#clock-cells":
+    const: 1
+
+  qcom,num-clkdivs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of CLKDIV peripherals.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - qcom,num-clkdivs
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@5b00 {
+            compatible = "qcom,spmi-clkdiv";
+            reg = <0x5b00>;
+            clocks = <&xo_board>;
+            clock-names = "xo";
+            #clock-cells = <1>;
+            qcom,num-clkdivs = <3>;
+
+            assigned-clocks = <&pm8998_clk_divs 1>,
+                              <&pm8998_clk_divs 2>,
+                              <&pm8998_clk_divs 3>;
+            assigned-clock-rates = <9600000>,
+                                   <9600000>,
+                                   <9600000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
deleted file mode 100644
index 126517de5f9a..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm Turing Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible: shall contain "qcom,qcs404-turingcc".
-- reg: shall contain base register location and length.
-- clocks: ahb clock for the TuringCC
-- #clock-cells: from common clock binding, shall contain 1.
-- #reset-cells: from common reset binding, shall contain 1.
-
-Example:
-	turingcc: clock-controller@800000 {
-		compatible = "qcom,qcs404-turingcc";
-		reg = <0x00800000 0x30000>;
-		clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 3cdbcebdc1a1..f4ff9acef9d5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -4,50 +4,44 @@
 $id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Video Clock & Reset Controller Binding
+title: Qualcomm Video Clock & Reset Controller
 
 maintainers:
-  - Taniya Das <tdas@codeaurora.org>
+  - Taniya Das <quic_tdas@quicinc.com>
 
 description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,videocc-sc7180.h
-    dt-bindings/clock/qcom,videocc-sc7280.h
-    dt-bindings/clock/qcom,videocc-sdm845.h
-    dt-bindings/clock/qcom,videocc-sm8150.h
-    dt-bindings/clock/qcom,videocc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,sm6350-videocc.h
+    include/dt-bindings/clock/qcom,videocc-sc7180.h
+    include/dt-bindings/clock/qcom,videocc-sc7280.h
+    include/dt-bindings/clock/qcom,videocc-sdm845.h
+    include/dt-bindings/clock/qcom,videocc-sm8150.h
+    include/dt-bindings/clock/qcom,videocc-sm8250.h
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-videocc
-      - qcom,sc7280-videocc
-      - qcom,sdm845-videocc
-      - qcom,sm8150-videocc
-      - qcom,sm8250-videocc
+    oneOf:
+      - enum:
+          - qcom,sc7180-videocc
+          - qcom,sc7280-videocc
+          - qcom,sdm845-videocc
+          - qcom,sm6350-videocc
+          - qcom,sm8150-videocc
+          - qcom,sm8250-videocc
+      - items:
+          - const: qcom,sc8180x-videocc
+          - const: qcom,sm8150-videocc
 
   clocks:
-    items:
-      - description: Board XO source
+    minItems: 1
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: bi_tcxo
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   power-domains:
     description:
@@ -61,19 +55,103 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-videocc
+            - qcom,sdm845-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Video AHB clock from GCC
+            - description: Board XO source
+            - description: Sleep Clock source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
       reg = <0x0ab00000 0x10000>;
@@ -82,7 +160,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
new file mode 100644
index 000000000000..938a2f1ff3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-camcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on x1e80100
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on x1e80100.
+
+  See also:
+    include/dt-bindings/clock/qcom,x1e80100-camcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,x1e80100-camcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    items:
+      - description: A phandle to the MXC power-domain
+      - description: A phandle to the MMCX power-domain
+
+  required-opps:
+    items:
+      - description: A phandle to an OPP node describing MXC performance points
+      - description: A phandle to an OPP node describing MMCX performance points
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,x1e80100-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MXC>,
+                      <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>,
+                      <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
new file mode 100644
index 000000000000..1b15b5070954
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,x1e80100-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on X1E80100
+
+  See also: include/dt-bindings/clock/qcom,x1e80100-gcc.h
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,x1p42100-gcc
+          - const: qcom,x1e80100-gcc
+      - const: qcom,x1e80100-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIe 3 pipe clock
+      - description: PCIe 4 pipe clock
+      - description: PCIe 5 pipe clock
+      - description: PCIe 6a pipe clock
+      - description: PCIe 6b pipe clock
+      - description: USB4_0 QMPPHY clock source
+      - description: USB4_1 QMPPHY clock source
+      - description: USB4_2 QMPPHY clock source
+      - description: USB4_0 PHY DP0 GMUX clock source
+      - description: USB4_0 PHY DP1 GMUX clock source
+      - description: USB4_0 PHY PCIE PIPEGMUX clock source
+      - description: USB4_0 PHY PIPEGMUX clock source
+      - description: USB4_0 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_1 PHY DP0 GMUX 2 clock source
+      - description: USB4_1 PHY DP1 GMUX 2 clock source
+      - description: USB4_1 PHY PCIE PIPEGMUX clock source
+      - description: USB4_1 PHY PIPEGMUX clock source
+      - description: USB4_1 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_2 PHY DP0 GMUX 2 clock source
+      - description: USB4_2 PHY DP1 GMUX 2 clock source
+      - description: USB4_2 PHY PCIE PIPEGMUX clock source
+      - description: USB4_2 PHY PIPEGMUX clock source
+      - description: USB4_2 PHY SYS PCIE PIPEGMUX clock source
+      - description: USB4_0 PHY RX 0 clock source
+      - description: USB4_0 PHY RX 1 clock source
+      - description: USB4_1 PHY RX 0 clock source
+      - description: USB4_1 PHY RX 1 clock source
+      - description: USB4_2 PHY RX 0 clock source
+      - description: USB4_2 PHY RX 1 clock source
+      - description: USB4_0 PHY PCIE PIPE clock source
+      - description: USB4_0 PHY max PIPE clock source
+      - description: USB4_1 PHY PCIE PIPE clock source
+      - description: USB4_1 PHY max PIPE clock source
+      - description: USB4_2 PHY PCIE PIPE clock source
+      - description: USB4_2 PHY max PIPE clock source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@100000 {
+      compatible = "qcom,x1e80100-gcc";
+      reg = <0x00100000 0x200000>;
+      clocks = <&bi_tcxo_div2>,
+               <&sleep_clk>,
+               <&pcie3_phy>,
+               <&pcie4_phy>,
+               <&pcie5_phy>,
+               <&pcie6a_phy>,
+               <&pcie6b_phy>,
+               <&usb_1_ss0_qmpphy 0>,
+               <&usb_1_ss1_qmpphy 1>,
+               <&usb_1_ss2_qmpphy 2>,
+               <&usb4_0_phy_dp0_gmux_clk>,
+               <&usb4_0_phy_dp1_gmux_clk>,
+               <&usb4_0_phy_pcie_pipegmux_clk>,
+               <&usb4_0_phy_pipegmux_clk>,
+               <&usb4_0_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_1_phy_dp0_gmux_2_clk>,
+               <&usb4_1_phy_dp1_gmux_2_clk>,
+               <&usb4_1_phy_pcie_pipegmux_clk>,
+               <&usb4_1_phy_pipegmux_clk>,
+               <&usb4_1_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_2_phy_dp0_gmux_2_clk>,
+               <&usb4_2_phy_dp1_gmux_2_clk>,
+               <&usb4_2_phy_pcie_pipegmux_clk>,
+               <&usb4_2_phy_pipegmux_clk>,
+               <&usb4_2_phy_sys_pcie_pipegmux_clk>,
+               <&usb4_0_phy_rx_0_clk>,
+               <&usb4_0_phy_rx_1_clk>,
+               <&usb4_1_phy_rx_0_clk>,
+               <&usb4_1_phy_rx_1_clk>,
+               <&usb4_2_phy_rx_0_clk>,
+               <&usb4_2_phy_rx_1_clk>,
+               <&usb4_0_phy_pcie_pipe_clk>,
+               <&usb4_0_phy_max_pipe_clk>,
+               <&usb4_1_phy_pcie_pipe_clk>,
+               <&usb4_1_phy_max_pipe_clk>,
+               <&usb4_2_phy_pcie_pipe_clk>,
+               <&usb4_2_phy_max_pipe_clk>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
deleted file mode 100644
index f7d48f23da44..000000000000
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ /dev/null
@@ -1,211 +0,0 @@
-* Clock Block on Freescale QorIQ Platforms
-
-Freescale QorIQ chips take primary clocking input from the external
-SYSCLK signal. The SYSCLK input (frequency) is multiplied using
-multiple phase locked loops (PLL) to create a variety of frequencies
-which can then be passed to a variety of internal logic, including
-cores and peripheral IP blocks.
-Please refer to the Reference Manual for details.
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-
-Chassis Version		Example Chips
----------------		-------------
-1.0			p4080, p5020, p5040
-2.0			t4240, b4860
-
-1. Clock Block Binding
-
-Required properties:
-- compatible: Should contain a chip-specific clock block compatible
-	string and (if applicable) may contain a chassis-version clock
-	compatible string.
-
-	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
-	* "fsl,p2041-clockgen"
-	* "fsl,p3041-clockgen"
-	* "fsl,p4080-clockgen"
-	* "fsl,p5020-clockgen"
-	* "fsl,p5040-clockgen"
-	* "fsl,t1023-clockgen"
-	* "fsl,t1024-clockgen"
-	* "fsl,t1040-clockgen"
-	* "fsl,t1042-clockgen"
-	* "fsl,t2080-clockgen"
-	* "fsl,t2081-clockgen"
-	* "fsl,t4240-clockgen"
-	* "fsl,b4420-clockgen"
-	* "fsl,b4860-clockgen"
-	* "fsl,ls1012a-clockgen"
-	* "fsl,ls1021a-clockgen"
-	* "fsl,ls1028a-clockgen"
-	* "fsl,ls1043a-clockgen"
-	* "fsl,ls1046a-clockgen"
-	* "fsl,ls1088a-clockgen"
-	* "fsl,ls2080a-clockgen"
-	Chassis-version clock strings include:
-	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
-	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
-- reg: Describes the address of the device's resources within the
-	address space defined by its parent bus, and resource zero
-	represents the clock register set
-
-Optional properties:
-- ranges: Allows valid translation between child's address space and
-	parent's. Must be present if the device has sub-nodes.
-- #address-cells: Specifies the number of cells used to represent
-	physical base addresses.  Must be present if the device has
-	sub-nodes and set to 1 if present
-- #size-cells: Specifies the number of cells used to represent
-	the size of an address. Must be present if the device has
-	sub-nodes and set to 1 if present
-- clock-frequency: Input system clock frequency (SYSCLK)
-- clocks: If clock-frequency is not specified, sysclk may be provided
-	as an input clock.  Either clock-frequency or clocks must be
-	provided.
-	A second input clock, called "coreclk", may be provided if
-	core PLLs are based on a different input clock from the
-	platform PLL.
-- clock-names: Required if a coreclk is present.  Valid names are
-	"sysclk" and "coreclk".
-
-2. Clock Provider
-
-The clockgen node should act as a clock provider, though in older device
-trees the children of the clockgen node are the clock providers.
-
-When the clockgen node is a clock provider, #clock-cells = <2>.
-The first cell of the clock specifier is the clock type, and the
-second cell is the clock index for the specified type.
-
-	Type#	Name		Index Cell
-	0	sysclk		must be 0
-	1	cmux		index (n in CLKCnCSR)
-	2	hwaccel		index (n in CLKCGnHWACSR)
-	3	fman		0 for fm1, 1 for fm2
-	4	platform pll	n=pll/(n+1). For example, when n=1,
-				that means output_freq=PLL_freq/2.
-	5	coreclk		must be 0
-
-3. Example
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-		clock-frequency = <133333333>;
-		reg = <0xe1000 0x1000>;
-		#clock-cells = <2>;
-	};
-
-	fman@400000 {
-		...
-		clocks = <&clockgen 3 0>;
-		...
-	};
-}
-4. Legacy Child Nodes
-
-NOTE: These nodes are deprecated.  Kernels should continue to support
-device trees with these nodes, but new device trees should not use them.
-
-Most of the bindings are from the common clock binding[1].
- [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : Should include one of the following:
-	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
-	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
-	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
-	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
-	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
-		It takes parent's clock-frequency as its clock.
-	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
-		It takes parent's clock-frequency as its clock.
-	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
-	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
-- #clock-cells: From common clock binding. The number of cells in a
-	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
-	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
-	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
-	clock-specifier cell may take the following values:
-	* 0 - equal to the PLL frequency
-	* 1 - equal to the PLL frequency divided by 2
-	* 2 - equal to the PLL frequency divided by 4
-
-Recommended properties:
-- clocks: Should be the phandle of input parent clock
-- clock-names: From common clock binding, indicates the clock name
-- clock-output-names: From common clock binding, indicates the names of
-	output clocks
-- reg: Should be the offset and length of clock block base address.
-	The length should be 4.
-
-Legacy Example:
-/ {
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		clock-frequency = <133333333>;
-		reg = <0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		platform-pll: platform-pll@c00 {
-			#clock-cells = <1>;
-			reg = <0xc00 0x4>;
-			compatible = "fsl,qoriq-platform-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "platform-pll", "platform-pll-div2";
-		};
-	};
-};
-
-Example for legacy clock consumer:
-
-/ {
-	cpu0: PowerPC,e5500@0 {
-		...
-		clocks = <&mux0>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
new file mode 100644
index 000000000000..cc4491f7ee5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 clock generator
+
+maintainers:
+  - A. della Porta <andrea.porta@suse.com>
+
+description: |
+  The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO,
+  VIDEO), and each PLL output can be programmed through dividers to generate
+  the clocks to drive the sub-peripherals embedded inside the chipset.
+
+  Link to datasheet:
+  https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
+
+properties:
+  compatible:
+    const: raspberrypi,rp1-clocks
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      The available clocks are defined in
+      include/dt-bindings/clock/raspberrypi,rp1-clocks.h.
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+    rp1 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks@c040018000 {
+            compatible = "raspberrypi,rp1-clocks";
+            reg = <0xc0 0x40018000 0x0 0x10038>;
+            #clock-cells = <1>;
+            clocks = <&clk_rp1_xosc>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
new file mode 100644
index 000000000000..162d38035188
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The 5P35023 is a VersaClock programmable clock generator and
+  is designed for low-power, consumer, and high-performance PCI
+  express applications. The 5P35023 device is a three PLL
+  architecture design, and each PLL is individually programmable
+  and allowing for up to 6 unique frequency outputs.
+
+  An internal OTP memory allows the user to store the configuration
+  in the device. After power up, the user can change the device register
+  settings through the I2C interface when I2C mode is selected.
+
+  The driver can read a full register map from the DT, and will use that
+  register map to initialize the attached part (via I2C) when the system
+  boots. Any configuration not supported by the common clock framework
+  must be done via the full register map, including optimized settings.
+
+  Link to datasheet:
+  https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator
+
+properties:
+  compatible:
+    enum:
+      - renesas,5l35023
+      - renesas,5p35023
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The index in the assigned-clocks is mapped to the output clock as below
+      0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  renesas,settings:
+    description: Optional, complete register map of the device.
+      Optimized settings for the device must be provided in full
+      and are written during initialization.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 37
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        versa3: clock-generator@68 {
+            compatible = "renesas,5p35023";
+            reg = <0x68>;
+            #clock-cells = <1>;
+
+            clocks = <&x1>;
+
+            renesas,settings = [
+                80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+                00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+                80 b0 45 c4 95
+            ];
+
+            assigned-clocks = <&versa3 0>, <&versa3 1>,
+                              <&versa3 2>, <&versa3 3>,
+                              <&versa3 4>, <&versa3 5>;
+            assigned-clock-rates = <24000000>, <11289600>,
+                                   <11289600>, <12000000>,
+                                   <25000000>, <12288000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
new file mode 100644
index 000000000000..af6319697b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+  - 9FGV0441:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+  - 9FGV0841:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+    4 -- DIF4
+    5 -- DIF5
+    6 -- DIF6
+    7 -- DIF7
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+      - renesas,9fgv0441
+      - renesas,9fgv0841
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
index 9185d101737e..a0e09b7002f0 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -32,12 +32,16 @@ properties:
   reg:
     maxItems: 1
 
-  clocks: true
+  clocks:
+    minItems: 1
+    maxItems: 3
 
   '#clock-cells':
     const: 1
 
-  clock-output-names: true
+  clock-output-names:
+    minItems: 3
+    maxItems: 17
 
   renesas,mode:
     description: Board-specific settings of the MD_CK* bits on R-Mobile A1
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
index c55a7c494e01..2197c952e21d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -51,6 +51,18 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
     sdhi2_clk: sdhi2_clk@e615007c {
             compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
             reg = <0xe615007c 4>;
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index 9b414fbde6d7..655154534c0f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Clock Pulse Generator / Module Standby and Software Reset
 
@@ -31,6 +31,7 @@ properties:
       - renesas,r8a7745-cpg-mssr  # RZ/G1E
       - renesas,r8a77470-cpg-mssr # RZ/G1C
       - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774a3-cpg-mssr # RZ/G2M v3.0
       - renesas,r8a774b1-cpg-mssr # RZ/G2N
       - renesas,r8a774c0-cpg-mssr # RZ/G2E
       - renesas,r8a774e1-cpg-mssr # RZ/G2H
@@ -48,9 +49,19 @@ properties:
       - renesas,r8a77990-cpg-mssr # R-Car E3
       - renesas,r8a77995-cpg-mssr # R-Car D3
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
+      - renesas,r8a779h0-cpg-mssr # R-Car V4M
+      - renesas,r9a09g077-cpg-mssr # RZ/T2H
+      - renesas,r9a09g087-cpg-mssr # RZ/N2H
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: base address of register block 0
+      - description: base address of register block 1
+    description: base addresses of clock controller. Some controllers
+      (like r9a09g077) use two blocks instead of a single one.
 
   clocks:
     minItems: 1
@@ -88,17 +99,6 @@ properties:
       the datasheet.
     const: 1
 
-if:
-  not:
-    properties:
-      compatible:
-        items:
-          enum:
-            - renesas,r7s9210-cpg-mssr
-then:
-  required:
-    - '#reset-cells'
-
 required:
   - compatible
   - reg
@@ -107,6 +107,36 @@ required:
   - '#clock-cells'
   - '#power-domain-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a09g077-cpg-mssr
+              - renesas,r9a09g087-cpg-mssr
+    then:
+      properties:
+        reg:
+          minItems: 2
+        clock-names:
+          items:
+            - const: extal
+    else:
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              enum:
+                - renesas,r7s9210-cpg-mssr
+    then:
+      required:
+        - '#reset-cells'
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
deleted file mode 100644
index 399e0da22348..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas H8/300 divider clock
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8300-div-clock"
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - reg: Base address and length of the divide rate selector
-
-  - renesas,width: bit width of selector
-
-Example
--------
-
-		cclk: cclk {
-			compatible = "renesas,h8300-div-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee01b 2>;
-			renesas,width = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
deleted file mode 100644
index 500cdadbceb7..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8s2678-pll-clock"
-
-  - clocks: Reference to the parent clocks
-
-  - #clock-cells: Must be 0
-
-  - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
-		pllclk: pllclk {
-			compatible = "renesas,h8s2678-pll-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee03b 2>, <0xfee045 2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 25dbb0fac065..26d94cedc871 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Renesas RZ/N1D (R9A06G032) System Controller
 
 maintainers:
-  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 properties:
@@ -39,6 +39,17 @@ properties:
   '#power-domain-cells':
     const: 0
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/dma/renesas,rzn1-dmamux.yaml#
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml
new file mode 100644
index 000000000000..3707e4118949
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a08g045-vbattb.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,r9a08g045-vbattb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Battery Backup Function (VBATTB)
+
+description:
+  Renesas VBATTB is an always on powered module (backed by battery) which
+  controls the RTC clock (VBATTCLK), tamper detection logic and a small
+  general usage memory (128B).
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r9a08g045-vbattb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: tamper detector interrupt
+
+  clocks:
+    items:
+      - description: VBATTB module clock
+      - description: RTC input clock (crystal or external clock device)
+
+  clock-names:
+    items:
+      - const: bclk
+      - const: rtx
+
+  '#clock-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: VBATTB module reset
+
+  quartz-load-femtofarads:
+    description: load capacitance of the on board crystal
+    enum: [ 4000, 7000, 9000, 12500 ]
+    default: 4000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a08g045-cpg.h>
+    #include <dt-bindings/clock/renesas,r9a08g045-vbattb.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    clock-controller@1005c000 {
+        compatible = "renesas,r9a08g045-vbattb";
+        reg = <0x1005c000 0x1000>;
+        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A08G045_VBAT_BCLK>, <&vbattb_xtal>;
+        clock-names = "bclk", "rtx";
+        assigned-clocks = <&vbattb VBATTB_MUX>;
+        assigned-clock-parents = <&vbattb VBATTB_XC>;
+        #clock-cells = <1>;
+        power-domains = <&cpg>;
+        resets = <&cpg R9A08G045_VBAT_BRESETN>;
+        quartz-load-femtofarads = <12500>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
index 6eaabb4d82ec..c84f29f1810f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car USB 2.0 clock selector
 
@@ -47,7 +47,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 4
     maxItems: 4
 
   clock-names:
@@ -64,7 +63,6 @@ properties:
     maxItems: 1
 
   resets:
-    minItems: 2
     maxItems: 2
 
   reset-names:
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 30b2e3d0d25d..8c18616e5c4d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -1,17 +1,18 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
-  Standby Mode share the same register block.
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
 
   They provide the following functionalities:
     - The CPG block generates various core clocks,
@@ -22,7 +23,12 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a08g045-cpg # RZ/G3S
+      - renesas,r9a09g011-cpg # RZ/V2M
 
   reg:
     maxItems: 1
@@ -40,9 +46,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g044-cpg.h>
+        <dt-bindings/clock/r9a0*-cpg.h>,
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -55,8 +61,8 @@ properties:
 
   '#reset-cells':
     description:
-      The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g044-cpg.h>.
+      The single reset specifier cell must be the reset number, as defined in
+      <dt-bindings/clock/r9a0*-cpg.h>.
     const: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
new file mode 100644
index 000000000000..f261445bf341
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G3E,V2H(P),V2N} Clock Pulse Generator (CPG)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  On Renesas RZ/{G3E,V2H(P),V2N} SoCs, the CPG (Clock Pulse Generator) handles
+  generation and control of clock signals for the IP modules, generation and
+  control of resets, and control over booting, low power consumption and power
+  supply domains.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a09g047-cpg # RZ/G3E
+      - renesas,r9a09g056-cpg # RZ/V2N
+      - renesas,r9a09g057-cpg # RZ/V2H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AUDIO_EXTAL clock input
+      - description: RTXIN clock input
+      - description: QEXTAL clock input
+
+  clock-names:
+    items:
+      - const: audio_extal
+      - const: rtxin
+      - const: qextal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/renesas,r9a09g0*-cpg.h>,
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number.  The module number is calculated as the CLKON register
+        offset index multiplied by 16, plus the actual bit in the register
+        used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the
+        calculation is (1 * 16 + 3) = 0x13.
+    const: 2
+
+  '#power-domain-cells':
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the reset number. The reset number
+      is calculated as the reset register offset index multiplied by 16, plus the
+      actual bit in the register used to reset the specific IP block. For example,
+      for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10420000 {
+        compatible = "renesas,r9a09g057-cpg";
+        reg = <0x10420000 0x10000>;
+        clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+        clock-names = "audio_extal", "rtxin", "qextal";
+        #clock-cells = <2>;
+        #power-domain-cells = <0>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 000000000000..b339f1f9f072
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/riscv,rpmi-clock.yaml b/Documentation/devicetree/bindings/clock/riscv,rpmi-clock.yaml
new file mode 100644
index 000000000000..5d62bf8215c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/riscv,rpmi-clock.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/riscv,rpmi-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V RPMI clock service group based clock controller
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a
+  messaging protocol which is modular and extensible. The supervisor
+  software can send/receive RPMI messages via SBI MPXY extension [2]
+  or some dedicated supervisor-mode RPMI transport.
+
+  The RPMI specification [1] defines clock service group for accessing
+  system clocks managed by a platform microcontroller. The supervisor
+  software can access RPMI clock service group via SBI MPXY channel or
+  some dedicated supervisor-mode RPMI transport.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+  [2] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+properties:
+  compatible:
+    description:
+      Intended for use by the supervisor software.
+    const: riscv,rpmi-clock
+
+  mboxes:
+    maxItems: 1
+    description:
+      Mailbox channel of the underlying RPMI transport or SBI message proxy channel.
+
+  "#clock-cells":
+    const: 1
+    description:
+      Platform specific CLOCK_ID as defined by the RISC-V Platform Management
+      Interface (RPMI) specification.
+
+required:
+  - compatible
+  - mboxes
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "riscv,rpmi-clock";
+        mboxes = <&mpxy_mbox 0x1000 0x0>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/riscv,rpmi-mpxy-clock.yaml b/Documentation/devicetree/bindings/clock/riscv,rpmi-mpxy-clock.yaml
new file mode 100644
index 000000000000..76f2a1b3d30d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/riscv,rpmi-mpxy-clock.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/riscv,rpmi-mpxy-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V RPMI clock service group based message proxy
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a
+  messaging protocol which is modular and extensible. The supervisor
+  software can send/receive RPMI messages via SBI MPXY extension [2]
+  or some dedicated supervisor-mode RPMI transport.
+
+  The RPMI specification [1] defines clock service group for accessing
+  system clocks managed by a platform microcontroller. The SBI implementation
+  (machine mode firmware or hypervisor) can implement an SBI MPXY channel
+  to allow RPMI clock service group access to the supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+  [2] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+properties:
+  compatible:
+    description:
+      Intended for use by the SBI implementation.
+    const: riscv,rpmi-mpxy-clock
+
+  mboxes:
+    maxItems: 1
+    description:
+      Mailbox channel of the underlying RPMI transport.
+
+  riscv,sbi-mpxy-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SBI MPXY channel id to be used for providing RPMI access to
+      the supervisor software.
+
+required:
+  - compatible
+  - mboxes
+  - riscv,sbi-mpxy-channel-id
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-service {
+        compatible = "riscv,rpmi-mpxy-clock";
+        mboxes = <&rpmi_shmem_mbox 0x8>;
+        riscv,sbi-mpxy-channel-id = <0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec8c..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000000..0f0f64b6f8cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9ef3..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3036-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@20060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20060000 0x100>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000000..ba5b45464315
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 000000000000..b3d9c8eca989
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
deleted file mode 100644
index 7f368530a2e4..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3188/RK3066 Clock and Reset Unit
-
-The RK3188/RK3066 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
-			"rockchip,rk3066a-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
-dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
-Similar macros exist for the reset sources in these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "xin27m" - 27mhz crystal input on rk3066 - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_cif0" - external camera clock - optional,
- - "ext_rmii" - external RMII clock - optional,
- - "ext_jtag" - externalJTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 000000000000..ddd7e46af0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
deleted file mode 100644
index f323048127eb..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3228 Clock and Reset Unit
-
-The RK3228 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3228-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3228-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10110000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10110000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 000000000000..1050fff72ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19241..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000000..6655e97d52e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 000000000000..fec37f5b80f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
deleted file mode 100644
index 904ae682ea90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3328 Clock and Reset Unit
-
-The RK3328 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3328-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "clkin_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
- - "hdmi_phy" - output clock of the hdmi phy pll - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff440000 {
-		compatible = "rockchip,rk3328-cru";
-		reg = <0x0 0xff440000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff120000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0xff120000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml
new file mode 100644
index 000000000000..f079c7a2559b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3328-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3328 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required,
+    - "clkin_i2s"   - external I2S clock                     - optional,
+    - "gmac_clkin"  - external GMAC clock                    - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+    - "hdmi_phy"    - output clock of the hdmi phy pll       - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3328-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff440000 {
+      compatible = "rockchip,rk3328-cru";
+      reg = <0xff440000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
deleted file mode 100644
index 7c8bbcfed8d2..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3368 Clock and Reset Unit
-
-The RK3368 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3368-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
- - "ext_vip" - external VIP clock - optional,
- - "usbotg_out" - output clock of the pll in the otg phy
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3368-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 000000000000..90af242b41c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
index 72b286a1beba..0b758e015ee3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Rockchip RK3399 Clock and Reset Unit
 
 maintainers:
-  - Xing Zheng <zhengxing@rock-chips.com>
+  - Elaine Zhang <zhangqing@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |
@@ -22,11 +22,11 @@ description: |
   There are several clocks that are generated outside the SoC. It is expected
   that they are defined using standard clock bindings with following
   clock-output-names:
-    - "xin24m" - crystal input - required,
-    - "xin32k" - rtc clock - optional,
-    - "clkin_gmac" - external GMAC clock - optional,
-    - "clkin_i2s" - external I2S clock - optional,
-    - "pclkin_cif" - external ISP clock - optional,
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
     - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
     - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
 
@@ -46,24 +46,15 @@ properties:
     const: 1
 
   clocks:
-    minItems: 1
-
-  assigned-clocks:
-    minItems: 1
-    maxItems: 64
-
-  assigned-clock-parents:
-    minItems: 1
-    maxItems: 64
+    maxItems: 1
 
-  assigned-clock-rates:
-    minItems: 1
-    maxItems: 64
+  clock-names:
+    const: xin24m
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: >
-      phandle to the syscon managing the "general register files". It is used
+    description:
+      Phandle to the syscon managing the "general register files". It is used
       for GRF muxes, if missing any muxes present in the GRF will not be
       available.
 
@@ -77,7 +68,7 @@ additionalProperties: false
 
 examples:
   - |
-    pmucru: pmu-clock-controller@ff750000 {
+    pmucru: clock-controller@ff750000 {
       compatible = "rockchip,rk3399-pmucru";
       reg = <0xff750000 0x1000>;
       #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml
new file mode 100644
index 000000000000..ca940475336c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3506-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3506 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RK3506 CRU generates the clock and also implements reset for SoC
+  peripherals.
+
+properties:
+  compatible:
+    const: rockchip,rk3506-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff9a0000 {
+      compatible = "rockchip,rk3506-cru";
+      reg = <0xff9a0000 0x20000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&xin24m>;
+      clock-names = "xin";
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml
new file mode 100644
index 000000000000..5a3ec902351c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3528-cru.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3528-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3528 Clock and Reset Controller
+
+maintainers:
+  - Yao Zi <ziyao@disroot.org>
+
+description: |
+  The RK3528 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example, it provides SCLK_UART0 and
+  PCLK_UART0 as well as SRST_P_UART0 and SRST_S_UART0 for the first UART
+  module.
+  Each clock is assigned an identifier, consumer nodes can use it to specify
+  the clock. All available clock and reset IDs are defined in dt-binding
+  headers.
+
+properties:
+  compatible:
+    const: rockchip,rk3528-cru
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External 24MHz oscillator clock
+      - description: >
+          50MHz clock generated by PHY module, for generating GMAC0 clocks only.
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: gmac0
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff4a0000 {
+        compatible = "rockchip,rk3528-cru";
+        reg = <0xff4a0000 0x30000>;
+        clocks = <&xin24m>, <&gmac0_clk>;
+        clock-names = "xin24m", "gmac0";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3562-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3562-cru.yaml
new file mode 100644
index 000000000000..36a353f5c42a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3562-cru.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3562-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3562 Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RK3562 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+
+properties:
+  compatible:
+    const: rockchip,rk3562-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff100000 {
+      compatible = "rockchip,rk3562-cru";
+      reg = <0xff100000 0x40000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
index b2c26097827f..f809c289445e 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROCKCHIP rk3568 Family Clock Control Module Binding
+title: ROCKCHIP rk3568 Family Clock Control Module
 
 maintainers:
   - Elaine Zhang <zhangqing@rock-chips.com>
@@ -34,6 +34,19 @@ properties:
   "#reset-cells":
     const: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3576-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3576-cru.yaml
new file mode 100644
index 000000000000..9c9b36049c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3576-cru.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3576-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3576 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Detlev Casanova <detlev.casanova@collabora.com>
+
+description:
+  The RK3576 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+
+properties:
+  compatible:
+    const: rockchip,rk3576-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@27200000 {
+      compatible = "rockchip,rk3576-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
new file mode 100644
index 000000000000..4ff175c4992b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3588-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3588 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3588 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clock and reset IDs
+  are defined as preprocessor macros in dt-binding headers.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@fd7c0000 {
+      compatible = "rockchip,rk3588-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
deleted file mode 100644
index 161326a4f9c1..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Rockchip RV1108 Clock and Reset Unit
-
-The RV1108 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rv1108-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_vip" - external VIP clock - optional
- - "ext_i2s" - external I2S clock - optional
- - "ext_gmac" - external GMAC clock - optional
- - "hdmiphy" - external clock input derived from HDMI PHY - optional
- - "usbphy" - external clock input derived from USB PHY - optional
-
-Example: Clock controller node:
-
-	cru: cru@20200000 {
-		compatible = "rockchip,rv1108-cru";
-		reg = <0x20200000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10230000 {
-		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
-		reg = <0x10230000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 000000000000..4611d920b8df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 000000000000..0998f8b922bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml
new file mode 100644
index 000000000000..04b0a5c51e4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126b-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126B Clock and Reset Unit
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The rv1126b clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126b-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@20000000 {
+      compatible = "rockchip,rv1126b-cru";
+      reg = <0x20000000 0xc0000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
index f14f1d39da36..d819dfaafff9 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 4e8062860986..a36781a455b6 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -24,6 +24,7 @@ properties:
           - samsung,exynos3250-cmu-dmc
           - samsung,exynos3250-cmu-isp
           - samsung,exynos4210-clock
+          - samsung,exynos4212-clock
           - samsung,exynos4412-clock
           - samsung,exynos5250-clock
       - items:
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
index 64d027dbe3b2..c98eff64f2b5 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung SoC external/osc/XXTI/XusbXTI clock
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos2200-cmu.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos2200-cmu.yaml
new file mode 100644
index 000000000000..89433e6d3518
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos2200-cmu.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos2200-cmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos2200 SoC clock controller
+
+maintainers:
+  - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Exynos2200 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clocks in that root tree
+  are two external clocks: XTCXO (76.8 MHz) and RTCCLK (32768 Hz). XTCXO must be
+  defined as a fixed-rate clock in dts, whereas RTCCLK originates from PMIC.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynos2200-cmu.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos2200-cmu-alive
+      - samsung,exynos2200-cmu-cmgp
+      - samsung,exynos2200-cmu-hsi0
+      - samsung,exynos2200-cmu-peric0
+      - samsung,exynos2200-cmu-peric1
+      - samsung,exynos2200-cmu-peric2
+      - samsung,exynos2200-cmu-peris
+      - samsung,exynos2200-cmu-top
+      - samsung,exynos2200-cmu-ufs
+      - samsung,exynos2200-cmu-vts
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-alive
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: CMU_ALIVE NOC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: CMU_CMGP NOC clock (from CMU_TOP)
+            - description: CMU_CMGP PERI clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: peri
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI0 NOC clock (from CMU_TOP)
+            - description: CMU_HSI0 DPGTC clock (from CMU_TOP)
+            - description: CMU_HSI0 DPOSC clock (from CMU_TOP)
+            - description: CMU_HSI0 USB32DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: noc
+            - const: dpgtc
+            - const: dposc
+            - const: usb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos2200-cmu-peric0
+              - samsung,exynos2200-cmu-peric1
+              - samsung,exynos2200-cmu-peric2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: CMU_PERICn NOC clock (from CMU_TOP)
+            - description: CMU_PERICn IP0 clock (from CMU_TOP)
+            - description: CMU_PERICn IP1 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: ip0
+            - const: ip1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (25.6 MHz)
+            - description: CMU_PERIS NOC clock (from CMU_TOP)
+            - description: CMU_PERIS GIC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: tcxo_div3
+            - const: noc
+            - const: gic
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-ufs
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: CMU_UFS NOC clock (from CMU_TOP)
+            - description: CMU_UFS MMC clock (from CMU_TOP)
+            - description: CMU_UFS UFS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: mmc
+            - const: ufs
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos2200-cmu-vts
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (76.8 MHz)
+            - description: CMU_VTS DMIC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dmic
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,exynos2200-cmu.h>
+
+    cmu_vts: clock-controller@15300000 {
+        compatible = "samsung,exynos2200-cmu-vts";
+        reg = <0x15300000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_CMU_VTS_DMIC>;
+        clock-names = "oscclk", "dmic";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
index 1ed64add4355..bee13436d1ea 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos4412 SoC ISP clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -61,4 +61,3 @@ examples:
         clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
         clock-names = "aclk200", "aclk400_mcuisp";
     };
-
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 000000000000..b05f83533e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 000000000000..b737c9d35a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 000000000000..3f9326e09f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 000000000000..c137c6744ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7870-cmu.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7870-cmu.yaml
new file mode 100644
index 000000000000..3c58712f12b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7870-cmu.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7870-cmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7870 SoC clock controller
+
+maintainers:
+  - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+  Exynos7870 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  include/dt-bindings/clock/samsung,exynos7870-cmu.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7870-cmu-mif
+      - samsung,exynos7870-cmu-dispaud
+      - samsung,exynos7870-cmu-fsys
+      - samsung,exynos7870-cmu-g3d
+      - samsung,exynos7870-cmu-isp
+      - samsung,exynos7870-cmu-mfcmscl
+      - samsung,exynos7870-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-mif
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-dispaud
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_DISPAUD bus clock (from CMU_MIF)
+            - description: DECON external clock (from CMU_MIF)
+            - description: DECON vertical clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: decon_eclk
+            - const: decon_vclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-fsys
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_MIF)
+            - description: USB20DRD clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-g3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: G3D switch clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-isp
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: ISP camera clock (from CMU_MIF)
+            - description: ISP clock (from CMU_MIF)
+            - description: ISP VRA clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: cam
+            - const: isp
+            - const: vra
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-mfcmscl
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: MSCL clock (from CMU_MIF)
+            - description: MFC clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: mfc
+            - const: mscl
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-cmu-peri
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_MIF)
+            - description: SPI0 clock (from CMU_MIF)
+            - description: SPI1 clock (from CMU_MIF)
+            - description: SPI2 clock (from CMU_MIF)
+            - description: SPI3 clock (from CMU_MIF)
+            - description: SPI4 clock (from CMU_MIF)
+            - description: UART0 clock (from CMU_MIF)
+            - description: UART1 clock (from CMU_MIF)
+            - description: UART2 clock (from CMU_MIF)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: spi0
+            - const: spi1
+            - const: spi2
+            - const: spi3
+            - const: spi4
+            - const: uart0
+            - const: uart1
+            - const: uart2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,exynos7870-cmu.h>
+
+    cmu_peri: clock-controller@101f0000 {
+      compatible = "samsung,exynos7870-cmu-peri";
+      reg = <0x101f0000 0x1000>;
+      #clock-cells = <1>;
+
+      clock-names = "oscclk", "bus", "spi0", "spi1", "spi2",
+                    "spi3", "spi4", "uart0", "uart1", "uart2";
+      clocks = <&oscclk>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
+               <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 000000000000..006d33a9e0f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
index 7f8c91a29b91..cdc5ded59fe5 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -9,7 +9,7 @@ title: Samsung Exynos850 SoC clock controller
 maintainers:
   - Sam Protsenko <semen.protsenko@linaro.org>
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -32,9 +32,17 @@ properties:
   compatible:
     enum:
       - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-cpucl0
+      - samsung,exynos850-cmu-cpucl1
       - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-g3d
       - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
       - samsung,exynos850-cmu-peri
 
   clocks:
@@ -72,6 +80,60 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-core
 
     then:
@@ -96,6 +158,46 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL0 switch clock (from CMU_TOP)
+            - description: CPUCL0 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl0_switch
+            - const: dout_cpucl0_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL1 switch clock (from CMU_TOP)
+            - description: CPUCL1 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl1_switch
+            - const: dout_cpucl1_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-dpu
 
     then:
@@ -114,6 +216,24 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-g3d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_g3d_switch
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-hsi
 
     then:
@@ -124,7 +244,7 @@ allOf:
             - description: External RTC clock (32768 Hz)
             - description: CMU_HSI bus clock (from CMU_TOP)
             - description: SD card clock (from CMU_TOP)
-            - description: "USB 2.0 DRD clock (from CMU_TOP)"
+            - description: USB 2.0 DRD clock (from CMU_TOP)
 
         clock-names:
           items:
@@ -138,6 +258,54 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-peri
 
     then:
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml
new file mode 100644
index 000000000000..111de33ce00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos8895-clock.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos8895-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos8895 SoC clock controller
+
+maintainers:
+  - Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Exynos8895 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynos8895.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos8895-cmu-fsys0
+      - samsung,exynos8895-cmu-fsys1
+      - samsung,exynos8895-cmu-peric0
+      - samsung,exynos8895-cmu-peric1
+      - samsung,exynos8895-cmu-peris
+      - samsung,exynos8895-cmu-top
+
+  clocks:
+    minItems: 1
+    maxItems: 16
+
+  clock-names:
+    minItems: 1
+    maxItems: 16
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 BUS clock (from CMU_TOP)
+            - description: CMU_FSYS0 DPGTC clock (from CMU_TOP)
+            - description: CMU_FSYS0 MMC_EMBD clock (from CMU_TOP)
+            - description: CMU_FSYS0 UFS_EMBD clock (from CMU_TOP)
+            - description: CMU_FSYS0 USBDRD30 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: dpgtc
+            - const: mmc
+            - const: ufs
+            - const: usbdrd30
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 BUS clock (from CMU_TOP)
+            - description: CMU_FSYS1 PCIE clock (from CMU_TOP)
+            - description: CMU_FSYS1 UFS_CARD clock (from CMU_TOP)
+            - description: CMU_FSYS1 MMC_CARD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: pcie
+            - const: ufs
+            - const: mmc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 BUS clock (from CMU_TOP)
+            - description: CMU_PERIC0 UART_DBG clock (from CMU_TOP)
+            - description: CMU_PERIC0 USI00 clock (from CMU_TOP)
+            - description: CMU_PERIC0 USI01 clock (from CMU_TOP)
+            - description: CMU_PERIC0 USI02 clock (from CMU_TOP)
+            - description: CMU_PERIC0 USI03 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: uart
+            - const: usi0
+            - const: usi1
+            - const: usi2
+            - const: usi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 BUS clock (from CMU_TOP)
+            - description: CMU_PERIC1 SPEEDY2 clock (from CMU_TOP)
+            - description: CMU_PERIC1 SPI_CAM0 clock (from CMU_TOP)
+            - description: CMU_PERIC1 SPI_CAM1 clock (from CMU_TOP)
+            - description: CMU_PERIC1 UART_BT clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI04 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI05 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI06 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI07 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI08 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI09 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI10 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI11 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI12 clock (from CMU_TOP)
+            - description: CMU_PERIC1 USI13 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: speedy
+            - const: cam0
+            - const: cam1
+            - const: uart
+            - const: usi4
+            - const: usi5
+            - const: usi6
+            - const: usi7
+            - const: usi8
+            - const: usi9
+            - const: usi10
+            - const: usi11
+            - const: usi12
+            - const: usi13
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS BUS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos8895-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,exynos8895.h>
+
+    cmu_fsys1: clock-controller@11400000 {
+        compatible = "samsung,exynos8895-cmu-fsys1";
+        reg = <0x11400000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_CMU_FSYS1_BUS>,
+                 <&cmu_top CLK_DOUT_CMU_FSYS1_PCIE>,
+                 <&cmu_top CLK_DOUT_CMU_FSYS1_UFS_CARD>,
+                 <&cmu_top CLK_DOUT_CMU_FSYS1_MMC_CARD>;
+        clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml
new file mode 100644
index 000000000000..5cd2d80b8ed6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos990-clock.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos990-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos990 SoC clock controller
+
+maintainers:
+  - Igor Belwon <igor.belwon@mentallysanemainliners.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Exynos990 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynos990.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos990-cmu-peric1
+      - samsung,exynos990-cmu-peric0
+      - samsung,exynos990-cmu-hsi0
+      - samsung,exynos990-cmu-peris
+      - samsung,exynos990-cmu-top
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos990-cmu-peric1
+              - samsung,exynos990-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos990-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_HSI0 BUS clock (from CMU_TOP)
+            - description: CMU_HSI0 USB31DRD clock (from CMU_TOP)
+            - description: CMU_HSI0 USBDP_DEBUG clock (from CMU_TOP)
+            - description: CMU_HSI0 DPGTC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: usb31drd
+            - const: usbdp_debug
+            - const: dpgtc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos990-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS BUS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos990-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,exynos990.h>
+
+    cmu_hsi0: clock-controller@10a00000 {
+        compatible = "samsung,exynos990-cmu-hsi0";
+        reg = <0x10a00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+                 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+                 <&cmu_top CLK_DOUT_CMU_HSI0_USBDP_DEBUG>,
+                 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>;
+        clock-names = "oscclk",
+                      "bus",
+                      "usb31drd",
+                      "usbdp_debug",
+                      "dpgtc";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..32f39e543b36
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-dpum
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-dpum
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU Main bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: gout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
new file mode 100644
index 000000000000..5bf905f88a1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
@@ -0,0 +1,298 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung ExynosAuto v920 SoC clock controller
+
+maintainers:
+  - Sunyeal Hong <sunyeal.hong@samsung.com>
+  - Shin Son <shin.son@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  ExynosAuto v920 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov920.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov920-cmu-cpucl0
+      - samsung,exynosautov920-cmu-cpucl1
+      - samsung,exynosautov920-cmu-cpucl2
+      - samsung,exynosautov920-cmu-hsi0
+      - samsung,exynosautov920-cmu-hsi1
+      - samsung,exynosautov920-cmu-hsi2
+      - samsung,exynosautov920-cmu-m2m
+      - samsung,exynosautov920-cmu-mfc
+      - samsung,exynosautov920-cmu-misc
+      - samsung,exynosautov920-cmu-peric0
+      - samsung,exynosautov920-cmu-peric1
+      - samsung,exynosautov920-cmu-top
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL0 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL0 CLUSTER clock (from CMU_TOP)
+            - description: CMU_CPUCL0 DBG clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+            - const: dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL1 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL1 CLUSTER clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-cpucl2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_CPUCL2 SWITCH clock (from CMU_TOP)
+            - description: CMU_CPUCL2 CLUSTER clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: switch
+            - const: cluster
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov920-cmu-peric0
+              - samsung,exynosautov920-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_PERICn NOC clock (from CMU_TOP)
+            - description: CMU_PERICn IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: ip
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - samsung,exynosautov920-cmu-misc
+            - samsung,exynosautov920-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_MISC/CMU_HSI0 NOC clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-hsi1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_HSI1 NOC clock (from CMU_TOP)
+            - description: CMU_HSI1 USBDRD clock (from CMU_TOP)
+            - description: CMU_HSI1 MMC_CARD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: usbdrd
+            - const: mmc_card
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-hsi2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_HSI2 NOC clock (from CMU_TOP)
+            - description: CMU_HSI2 NOC UFS clock (from CMU_TOP)
+            - description: CMU_HSI2 UFS EMBD clock (from CMU_TOP)
+            - description: CMU_HSI2 ETHERNET clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: ufs
+            - const: embd
+            - const: ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-m2m
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_M2M NOC clock (from CMU_TOP)
+            - description: CMU_M2M JPEG clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: noc
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov920-cmu-mfc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (38.4 MHz)
+            - description: CMU_MFC MFC clock (from CMU_TOP)
+            - description: CMU_MFC WFD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: mfc
+            - const: wfd
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERIC0
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov920.h>
+
+    cmu_peric0: clock-controller@10800000 {
+        compatible = "samsung,exynosautov920-cmu-peric0";
+        reg = <0x10800000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
+                 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+        clock-names = "oscclk",
+                      "noc",
+                      "ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
index 1410c51e0e7d..91d455155a60 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2M and S5M family clock generator block
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
@@ -25,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - samsung,s2mpg10-clk
       - samsung,s2mps11-clk
       - samsung,s2mps13-clk # S2MPS13 and S2MPS15
       - samsung,s2mps14-clk
@@ -34,7 +35,6 @@ properties:
     const: 1
 
   clock-output-names:
-    minItems: 3
     maxItems: 3
     description: Names for AP, CP and BT clocks.
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
deleted file mode 100644
index 2632d3f13004..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2410 Clock Controller
-
-The S3C2410 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2410,
-s3c2440 and s3c2442 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
-  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
-  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2410.h header and can be used in device
-tree sources.
-
-External clocks:
-
-The xti clock used as input for the plls is generated outside the SoC. It is
-expected that is are defined using standard clock bindings with a
-clock-output-names value of "xti".
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2410-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
deleted file mode 100644
index 21a8c23e658f..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2412 Clock Controller
-
-The S3C2412 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2412
-and s3c2413 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be "samsung,s3c2412-clock"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2412.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xti" - crystal input - required,
- - "ext" - external clock source - optional,
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2412-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2412-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			 <&clocks SCLK_UART>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
deleted file mode 100644
index 985c0f574e9a..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Samsung S3C2443 Clock Controller
-
-The S3C2443 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to all SoCs in
-the s3c24x family starting with the s3c2443.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
-  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
-  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2443.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xti" - crystal input - required,
- - "ext" - external clock source - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_uart" - external uart clock - optional,
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-				<&clocks SCLK_UART>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml
new file mode 100644
index 000000000000..0fcc0c963f8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c6400-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s3c6400-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C6400 SoC clock controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names and/or provided as clock inputs to this clock controller:
+   - "fin_pll" - PLL input clock (xtal/extclk) - required,
+   - "xusbxti" - USB xtal - required,
+   - "iiscdclk0" - I2S0 codec clock - optional,
+   - "iiscdclk1" - I2S1 codec clock - optional,
+   - "iiscdclk2" - I2S2 codec clock - optional,
+   - "pcmcdclk0" - PCM0 codec clock - optional,
+   - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/samsung,s3c64xx-clock.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6400-clock
+      - samsung,s3c6410-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@7e00f000 {
+        compatible = "samsung,s3c6410-clock";
+        reg = <0x7e00f000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
deleted file mode 100644
index 872ee8e0f041..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Samsung S3C64xx Clock Controller
-
-The S3C64xx clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to all SoCs in
-the S3C64xx family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
-  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular S3C64xx SoC and this is specified where applicable.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "fin_pll" - PLL input clock (xtal/extclk) - required,
- - "xusbxti" - USB xtal - required,
- - "iiscdclk0" - I2S0 codec clock - optional,
- - "iiscdclk1" - I2S1 codec clock - optional,
- - "iiscdclk2" - I2S2 codec clock - optional,
- - "pcmcdclk0" - PCM0 codec clock - optional,
- - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6410-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	fin_pll: clock-fin-pll {
-		compatible = "fixed-clock";
-		clock-output-names = "fin_pll";
-		clock-frequency = <12000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <48000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-		uart0: serial@7f005000 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <5>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
-					<&clock SCLK_UART>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
index ae8f8fc93233..2659854ea1c0 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung S5Pv210 SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d4e..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 000000000000..67a33665cf00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
index c3be1b600007..c79e752283aa 100644
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
 
 maintainers:
-  - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
 
 description:
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
deleted file mode 100644
index a4f28ec86f35..000000000000
--- a/Documentation/devicetree/bindings/clock/silabs,si514.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Binding for Silicon Labs 514 programmable I2C clock generator.
-
-Reference
-This binding uses the common clock binding[1]. Details about the device can be
-found in the datasheet[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Si514 datasheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
-
-Required properties:
- - compatible: Shall be "silabs,si514"
- - reg: I2C device address.
- - #clock-cells: From common clock bindings: Shall be 0.
-
-Optional properties:
- - clock-output-names: From common clock bindings. Recommended to be "si514".
-
-Example:
-	si514: clock-generator@55 {
-		reg = <0x55>;
-		#clock-cells = <0>;
-		compatible = "silabs,si514";
-	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
deleted file mode 100644
index ce55aba0ce22..000000000000
--- a/Documentation/devicetree/bindings/clock/silabs,si5341.txt
+++ /dev/null
@@ -1,175 +0,0 @@
-Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
-i2c clock generator.
-
-Reference
-[1] Si5341 Data Sheet
-    https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
-[2] Si5341 Reference Manual
-    https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
-[3] Si5345 Reference Manual
-    https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
-
-The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
-clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
-in turn can be directed to any of the 10 (or 4) outputs through a divider.
-The internal structure of the clock generators can be found in [2].
-The Si5345 is similar to the Si5341 with the addition of fractional input
-dividers and automatic input selection, as described in [3].
-The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
-
-The driver can be used in "as is" mode, reading the current settings from the
-chip at boot, in case you have a (pre-)programmed device. If the PLL is not
-configured when the driver probes, it assumes the driver must fully initialize
-it.
-
-The device type, speed grade and revision are determined runtime by probing.
-
-The driver currently does not support any fancy input configurations. They can
-still be programmed into the chip and the driver will leave them "as is".
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
-	"silabs,si5340" - Si5340 A/B/C/D
-	"silabs,si5341" - Si5341 A/B/C/D
-	"silabs,si5342" - Si5342 A/B/C/D
-	"silabs,si5344" - Si5344 A/B/C/D
-	"silabs,si5345" - Si5345 A/B/C/D
-- reg: i2c device address, usually 0x74
-- #clock-cells: from common clock binding; shall be set to 2.
-	The first value is "0" for outputs, "1" for synthesizers.
-	The second value is the output or synthesizer index.
-- clocks: from common clock binding; list of parent clock  handles,
-	corresponding to inputs. Use a fixed clock for the "xtal" input.
-	At least one must be present.
-- clock-names: One of: "xtal", "in0", "in1", "in2"
-
-Optional properties:
-- vdd-supply: Regulator node for VDD
-- vdda-supply: Regulator node for VDDA
-- vdds-supply: Regulator node for VDDS
-- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
-  feedback divider. Must be such that the PLL output is in the valid range. For
-  example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
-  the fraction matters, using 3500 and 12 will deliver the exact same result.
-  If these are not specified, and the PLL is not yet programmed when the driver
-  probes, the PLL will be set to 14GHz.
-- silabs,reprogram: When present, the driver will always assume the device must
-  be initialized, and always performs the soft-reset routine. Since this will
-  temporarily stop all output clocks, don't do this if the chip is generating
-  the CPU clock for example.
-- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
-  in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
-- interrupts: Interrupt for INTRb pin.
-- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
-  rather than 1.8V thresholds.
-- vddoX-supply (where X is an output index): Regulator node for VDDO for the
-  specified output. The driver selects the output VDD_SEL setting based on this
-  voltage.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-
-== Child nodes: Outputs ==
-
-The child nodes list the output clocks.
-
-Each of the clock outputs can be overwritten individually by using a child node.
-If a child node for a clock output is not set, the configuration remains
-unchanged.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,format: Output format, one of:
-	1 = differential (defaults to LVDS levels)
-	2 = low-power (defaults to HCSL levels)
-	4 = LVCMOS
-- silabs,common-mode: Manually override output common mode, see [2] for values
-- silabs,amplitude: Manually override output amplitude, see [2] for values
-- silabs,synth-master: boolean. If present, this output is allowed to change the
-	multisynth frequency dynamically.
-- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
-	when disabled, otherwise it's driven LOW.
-
-==Example==
-
-/* 48MHz reference crystal */
-ref48: ref48M {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <48000000>;
-};
-
-i2c-master-node {
-	/* Programmable clock (for logic) */
-	si5341: clock-generator@74 {
-		reg = <0x74>;
-		compatible = "silabs,si5341";
-		#clock-cells = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&ref48>;
-		clock-names = "xtal";
-
-		silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
-		silabs,pll-m-den = <48>;
-		silabs,reprogram; /* Chips are not programmed, always reset */
-
-		out@0 {
-			reg = <0>;
-			silabs,format = <1>; /* LVDS 3v3 */
-			silabs,common-mode = <3>;
-			silabs,amplitude = <3>;
-			silabs,synth-master;
-		};
-
-		/*
-		 * Output 6 configuration:
-		 *  LVDS 1v8
-		 */
-		out@6 {
-			reg = <6>;
-			silabs,format = <1>; /* LVDS 1v8 */
-			silabs,common-mode = <13>;
-			silabs,amplitude = <3>;
-		};
-
-		/*
-		 * Output 8 configuration:
-		 *  HCSL 3v3
-		 */
-		out@8 {
-			reg = <8>;
-			silabs,format = <2>;
-			silabs,common-mode = <11>;
-			silabs,amplitude = <3>;
-		};
-	};
-};
-
-some-video-node {
-	/* Standard clock bindings */
-	clock-names = "pixel";
-	clocks = <&si5341 0 7>; /* Output 7 */
-
-	/* Set output 7 to use syntesizer 3 as its parent */
-	assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
-	assigned-clock-parents = <&si5341 1 3>;
-	/* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
-	assigned-clock-rates = <148500000>, <594000000>;
-};
-
-some-audio-node {
-	clock-names = "i2s-clk";
-	clocks = <&si5341 0 0>;
-	/*
-	 * since output 0 is a synth-master, the synth will be automatically set
-	 * to an appropriate frequency when the audio driver requests another
-	 * frequency. We give control over synth 2 to this output here.
-	 */
-	assigned-clocks = <&si5341 0 0>;
-	assigned-clock-parents = <&si5341 1 2>;
-};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.yaml b/Documentation/devicetree/bindings/clock/silabs,si5341.yaml
new file mode 100644
index 000000000000..d6416bded3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/silabs,si5341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si5340/1/2/4/5 programmable i2c clock generator
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: >
+  Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable i2c clock
+  generator.
+
+  Reference
+  [1] Si5341 Data Sheet
+      https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+  [2] Si5341 Reference Manual
+      https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+  [3] Si5345 Reference Manual
+      https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
+
+  The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+  clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+  in turn can be directed to any of the 10 (or 4) outputs through a divider.
+  The internal structure of the clock generators can be found in [2].
+  The Si5345 is similar to the Si5341 with the addition of fractional input
+  dividers and automatic input selection, as described in [3].
+  The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
+
+  The driver can be used in "as is" mode, reading the current settings from the
+  chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+  configured when the driver probes, it assumes the driver must fully initialize
+  it.
+
+  The device type, speed grade and revision are determined runtime by probing.
+
+properties:
+  compatible:
+    enum:
+      - silabs,si5340
+      - silabs,si5341
+      - silabs,si5342
+      - silabs,si5344
+      - silabs,si5345
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 2
+    description: >
+      The first value is "0" for outputs, "1" for synthesizers.
+
+      The second value is the output or synthesizer index.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xtal
+      - const: in0
+      - const: in1
+      - const: in2
+
+  clock-output-names: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for INTRb pin
+
+  vdd-supply:
+    description: Regulator node for VDD
+
+  vdda-supply:
+    description: Regulator node for VDDA
+
+  vdds-supply:
+    description: Regulator node for VDDS
+
+  silabs,pll-m-num:
+    description:
+      Numerator for PLL feedback divider. Must be such that the PLL output is in
+      the valid range. For example, to create 14GHz from a 48MHz xtal, use
+      m-num=14000 and m-den=48. Only the fraction matters, using 3500 and 12
+      will deliver the exact same result. If these are not specified, and the
+      PLL is not yet programmed when the driver probes, the PLL will be set to
+      14GHz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  silabs,pll-m-den:
+    description: Denominator for PLL feedback divider
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  silabs,reprogram:
+    description: Always perform soft-reset and reinitialize PLL
+    type: boolean
+
+  silabs,xaxb-ext-clk:
+    description: Use XA/XB pins as external reference clock
+    type: boolean
+
+  silabs,iovdd-33:
+    description: I2C lines use 3.3V thresholds
+    type: boolean
+
+patternProperties:
+  "^vddo[0-9]-supply$": true
+
+  "^out@[0-9]$":
+    description: >
+      Output-specific override nodes
+
+      Each of the clock outputs can be overwritten individually by using a child
+      node. If a child node for a clock output is not set, the configuration
+      remains unchanged.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Number of clock output
+        maximum: 9
+
+      always-on:
+        description: Set to keep the clock output always running
+        type: boolean
+
+      silabs,format:
+        description: Output format
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 4]
+
+      silabs,common-mode:
+        description: Override output common mode
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      silabs,amplitude:
+        description: Override output amplitude
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      silabs,synth-master:
+        description: Allow dynamic multisynth rate control
+        type: boolean
+
+      silabs,disable-high:
+        description: Drive output HIGH when disabled
+        type: boolean
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@74 {
+            reg = <0x74>;
+            compatible = "silabs,si5341";
+            #clock-cells = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&ref48>;
+            clock-names = "xtal";
+
+            silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+            silabs,pll-m-den = <48>;
+            silabs,reprogram; /* Chips are not programmed, always reset */
+
+            out@0 {
+                reg = <0>;
+                silabs,format = <1>; /* LVDS 3v3 */
+                silabs,common-mode = <3>;
+                silabs,amplitude = <3>;
+                silabs,synth-master;
+            };
+
+            /*
+              * Output 6 configuration:
+              *  LVDS 1v8
+              */
+            out@6 {
+                reg = <6>;
+                silabs,format = <1>; /* LVDS 1v8 */
+                silabs,common-mode = <13>;
+                silabs,amplitude = <3>;
+            };
+
+            /*
+              * Output 8 configuration:
+              *  HCSL 3v3
+              */
+            out@8 {
+                reg = <8>;
+                silabs,format = <2>;
+                silabs,common-mode = <11>;
+                silabs,amplitude = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
deleted file mode 100644
index bfda6af76bee..000000000000
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
-
-Reference
-[1] Si5351A/B/C Data Sheet
-    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
-
-The Si5351a/b/c are programmable i2c clock generators with up to 8 output
-clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
-3 output clocks are accessible. The internal structure of the clock
-generators can be found in [1].
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
-	"silabs,si5351a" - Si5351a, QFN20 package
-	"silabs,si5351a-msop" - Si5351a, MSOP10 package
-	"silabs,si5351b" - Si5351b, QFN20 package
-	"silabs,si5351c" - Si5351c, QFN20 package
-- reg: i2c device address, shall be 0x60 or 0x61.
-- #clock-cells: from common clock binding; shall be set to 1.
-- clocks: from common clock binding; list of parent clock
-  handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only. Corresponding clock input names are "xtal" and
-  "clkin" respectively.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-Optional properties:
-- silabs,pll-source: pair of (number, source) for each pll. Allows
-  to overwrite clock source of pll A (number=0) or B (number=1).
-
-==Child nodes==
-
-Each of the clock outputs can be overwritten individually by
-using a child node to the I2C device node. If a child node for a clock
-output is not set, the eeprom configuration is not overwritten.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,clock-source: source clock of the output divider stage N, shall be
-  0 = multisynth N
-  1 = multisynth 0 for output clocks 0-3, else multisynth4
-  2 = xtal
-  3 = clkin (si5351c only)
-- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
-- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
-  divider.
-- silabs,pll-master: boolean, multisynth can change pll frequency.
-- silabs,pll-reset: boolean, clock output can reset its pll.
-- silabs,disable-state : clock output disable state, shall be
-  0 = clock output is driven LOW when disabled
-  1 = clock output is driven HIGH when disabled
-  2 = clock output is FLOATING (HIGH-Z) when disabled
-  3 = clock output is NEVER disabled
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25M {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* Si5351a msop10 i2c clock generator */
-	si5351a: clock-generator@60 {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-		clock-names = "xtal";
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		/*
-		 * overwrite clkout0 configuration with:
-		 * - 8mA output drive strength
-		 * - pll0 as clock source of multisynth0
-		 * - multisynth0 as clock source of output divider
-		 * - multisynth0 can change pll0
-		 * - set initial clock frequency of 74.25MHz
-		 */
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-			clock-frequency = <74250000>;
-		};
-
-		/*
-		 * overwrite clkout1 configuration with:
-		 * - 4mA output drive strength
-		 * - pll1 as clock source of multisynth1
-		 * - multisynth1 as clock source of output divider
-		 * - multisynth1 can change pll1
-		 */
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <4>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			pll-master;
-		};
-
-		/*
-		 * overwrite clkout2 configuration with:
-		 * - xtal as clock source of output divider
-		 */
-		clkout2 {
-			reg = <2>;
-			silabs,clock-source = <2>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.yaml b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
new file mode 100644
index 000000000000..d3e0ec29993b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.yaml
@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si5351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si5351A/B/C programmable I2C clock generators
+
+description: |
+  The Silicon Labs Si5351A/B/C are programmable I2C clock generators with up to
+  8 outputs. Si5351A also has a reduced pin-count package (10-MSOP) where only 3
+  output clocks are accessible. The internal structure of the clock generators
+  can be found in [1].
+
+  [1] Si5351A/B/C Data Sheet
+      https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+maintainers:
+  - Alvin Šipraga <alsi@bang-olufsen.dk>
+
+properties:
+  compatible:
+    enum:
+      - silabs,si5351a      # Si5351A, 20-QFN package
+      - silabs,si5351a-msop # Si5351A, 10-MSOP package
+      - silabs,si5351b      # Si5351B, 20-QFN package
+      - silabs,si5351c      # Si5351C, 20-QFN package
+
+  reg:
+    enum:
+      - 0x60
+      - 0x61
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xtal
+      - const: clkin
+
+  silabs,pll-source:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      A list of cell pairs containing a PLL index and its source. Allows to
+      overwrite clock source of the internal PLLs.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: PLL source, XTAL (0) or CLKIN (1, Si5351C only).
+          enum: [ 0, 1 ]
+
+  silabs,pll-reset-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
+    description: A list of cell pairs containing a PLL index and its reset mode.
+    items:
+      items:
+        - description: PLL A (0) or PLL B (1)
+          enum: [ 0, 1 ]
+        - description: |
+            Reset mode for the PLL. Mode can be one of:
+
+                0 - reset whenever PLL rate is adjusted (default mode)
+                1 - do not reset when PLL rate is adjusted
+
+            In mode 1, the PLL is only reset if the silabs,pll-reset is
+            specified in one of the clock output child nodes that also sources
+            the PLL. This mode may be preferable if output clocks are expected
+            to be adjusted without glitches.
+          enum: [ 0, 1 ]
+
+patternProperties:
+  "^clkout@[0-7]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Clock output number.
+
+      clock-frequency: true
+
+      silabs,clock-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Source clock of the this output's divider stage.
+
+          0 - use multisynth N for this output, where N is the output number
+          1 - use either multisynth 0 (if output number is 0-3) or multisynth 4
+              (otherwise) for this output
+          2 - use XTAL for this output
+          3 - use CLKIN for this output (Si5351C only)
+
+      silabs,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2, 4, 6, 8 ]
+        description: Output drive strength in mA.
+
+      silabs,multisynth-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        description:
+          Source PLL A (0) or B (1) for the corresponding multisynth divider.
+
+      silabs,pll-master:
+        type: boolean
+        description: |
+          The frequency of the source PLL is allowed to be changed by the
+          multisynth when setting the rate of this clock output.
+
+      silabs,pll-reset:
+        type: boolean
+        description: Reset the source PLL when enabling this clock output.
+
+      silabs,disable-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3 ]
+        description: |
+          Clock output disable state. The state can be one of:
+
+          0 - clock output is driven LOW when disabled
+          1 - clock output is driven HIGH when disabled
+          2 - clock output is FLOATING (HIGH-Z) when disabled
+          3 - clock output is never disabled
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351a-msop
+        then:
+          properties:
+            reg:
+              maximum: 2
+        else:
+          properties:
+            reg:
+              maximum: 7
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: silabs,si5351c
+        then:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2, 3 ]
+        else:
+          properties:
+            silabs,clock-source:
+              enum: [ 0, 1, 2 ]
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - silabs,si5351a
+              - silabs,si5351a-msop
+              - silabs,si5351b
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-generator@60 {
+        compatible = "silabs,si5351a-msop";
+        reg = <0x60>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <1>;
+
+        /* Connect XTAL input to 25MHz reference */
+        clocks = <&ref25>;
+        clock-names = "xtal";
+
+        /* Use XTAL input as source of PLL0 and PLL1 */
+        silabs,pll-source = <0 0>, <1 0>;
+
+        /* Don't reset PLL1 on rate adjustment */
+        silabs,pll-reset-mode = <1 1>;
+
+        /*
+         * Overwrite CLK0 configuration with:
+         * - 8 mA output drive strength
+         * - PLL0 as clock source of multisynth 0
+         * - Multisynth 0 as clock source of output divider
+         * - Multisynth 0 can change PLL0
+         * - Set initial clock frequency of 74.25MHz
+         */
+        clkout@0 {
+          reg = <0>;
+          silabs,drive-strength = <8>;
+          silabs,multisynth-source = <0>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          clock-frequency = <74250000>;
+        };
+
+        /*
+         * Overwrite CLK1 configuration with:
+         * - 4 mA output drive strength
+         * - PLL1 as clock source of multisynth 1
+         * - Multisynth 1 as clock source of output divider
+         * - Multisynth 1 can change PLL1
+         * - Reset PLL1 when enabling this clock output
+         */
+        clkout@1 {
+          reg = <1>;
+          silabs,drive-strength = <4>;
+          silabs,multisynth-source = <1>;
+          silabs,clock-source = <0>;
+          silabs,pll-master;
+          silabs,pll-reset;
+        };
+
+        /*
+         * Overwrite CLK2 configuration with:
+         * - XTAL as clock source of output divider
+         */
+        clkout@2 {
+          reg = <2>;
+          silabs,clock-source = <2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt
deleted file mode 100644
index b86535b80920..000000000000
--- a/Documentation/devicetree/bindings/clock/silabs,si544.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for Silicon Labs 544 programmable I2C clock generator.
-
-Reference
-This binding uses the common clock binding[1]. Details about the device can be
-found in the datasheet[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Si544 datasheet
-    https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
-
-Required properties:
- - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according
-               to the speed grade of the chip.
- - reg: I2C device address.
- - #clock-cells: From common clock bindings: Shall be 0.
-
-Optional properties:
- - clock-output-names: From common clock bindings. Recommended to be "si544".
-
-Example:
-	si544: clock-controller@55 {
-		reg = <0x55>;
-		#clock-cells = <0>;
-		compatible = "silabs,si544b";
-	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.yaml b/Documentation/devicetree/bindings/clock/silabs,si544.yaml
new file mode 100644
index 000000000000..f87e71867108
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si544.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs SI514/SI544 clock generator
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: >
+  Silicon Labs 514/544 programmable I2C clock generator. Details about the device
+  can be found in the datasheet:
+
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+    https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - silabs,si514
+      - silabs,si544a
+      - silabs,si544b
+      - silabs,si544c
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@55 {
+            reg = <0x55>;
+            #clock-cells = <0>;
+            compatible = "silabs,si544b";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
deleted file mode 100644
index 5dda17df1ac5..000000000000
--- a/Documentation/devicetree/bindings/clock/silabs,si570.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Binding for Silicon Labs 570, 571, 598 and 599 programmable
-I2C clock generators.
-
-Reference
-This binding uses the common clock binding[1]. Details about the devices can be
-found in the data sheets[2][3].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Si570/571 Data Sheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
-[3] Si598/599 Data Sheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
-
-Required properties:
- - compatible: Shall be one of "silabs,si570", "silabs,si571",
-			       "silabs,si598", "silabs,si599"
- - reg: I2C device address.
- - #clock-cells: From common clock bindings: Shall be 0.
- - factory-fout: Factory set default frequency. This frequency is part specific.
-		 The correct frequency for the part used has to be provided in
-		 order to generate the correct output frequencies. For more
-		 details, please refer to the data sheet.
- - temperature-stability: Temperature stability of the device in PPM. Should be
-			  one of: 7, 20, 50 or 100.
-
-Optional properties:
- - clock-output-names: From common clock bindings. Recommended to be "si570".
- - clock-frequency: Output frequency to generate. This defines the output
-		    frequency set during boot. It can be reprogrammed during
-		    runtime through the common clock framework.
- - silabs,skip-recall: Do not perform NVM->RAM recall operation. It will rely
-		       on hardware loading of RAM from NVM at power on.
-
-Example:
-	si570: clock-generator@5d {
-		#clock-cells = <0>;
-		compatible = "silabs,si570";
-		temperature-stability = <50>;
-		reg = <0x5d>;
-		factory-fout = <156250000>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.yaml b/Documentation/devicetree/bindings/clock/silabs,si570.yaml
new file mode 100644
index 000000000000..90e2f79e2b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/silabs,si570.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si570/Si571/Si598/Si599 programmable I2C clock generator
+
+maintainers:
+  - Soren Brinkmann <soren.brinkmann@xilinx.com>
+
+description: >
+  Silicon Labs 570, 571, 598 and 599 programmable I2C clock generators. Details
+  about the devices can be found in the data sheets[1][2].
+
+  [1] Si570/571 Data Sheet
+      https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+  [2] Si598/599 Data Sheet
+      https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+properties:
+  compatible:
+    enum:
+      - silabs,si570
+      - silabs,si571
+      - silabs,si598
+      - silabs,si599
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  factory-fout:
+    description: Factory-set default frequency in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  temperature-stability:
+    description: Temperature stability of the device in PPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 7
+      - 20
+      - 50
+      - 100
+
+  clock-output-names:
+    maxItems: 1
+
+  clock-frequency:
+    description: Output frequency to generate at boot; can be reprogrammed at runtime.
+
+  silabs,skip-recall:
+    description: Skip the NVM-to-RAM recall operation during boot.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - factory-fout
+  - temperature-stability
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@5d {
+            compatible = "silabs,si570";
+            reg = <0x5d>;
+            #clock-cells = <0>;
+            temperature-stability = <50>;
+            factory-fout = <156250000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
new file mode 100644
index 000000000000..9e35e0e51ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/skyworks,si521xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Si521xx I2C PCIe clock generators
+
+description: |
+  The Skyworks Si521xx are I2C PCIe clock generators providing
+  from 4 to 9 output clocks.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - skyworks,si52144
+      - skyworks,si52146
+      - skyworks,si52147
+
+  reg:
+    const: 0x6b
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  skyworks,out-amplitude-microvolt:
+    enum: [ 300000, 400000, 500000, 600000, 700000, 800000, 900000, 1000000 ]
+    description: Output clock signal amplitude
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@6b {
+            compatible = "skyworks,si52144";
+            reg = <0x6b>;
+            #clock-cells = <1>;
+            clocks = <&ref25m>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index 9a0cc7341630..4e82582fb2f3 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -61,40 +61,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-mio-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-peri-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
new file mode 100644
index 000000000000..379ce3e9e391
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,cv1800-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,cv1800-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG2000 Series Clock Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sophgo,cv1800b-clk
+          - sophgo,cv1812h-clk
+          - sophgo,sg2000-clk
+      - items:
+          - const: sophgo,sg2002-clk
+          - const: sophgo,sg2000-clk
+      - const: sophgo,cv1800-clk
+        deprecated: true
+      - const: sophgo,cv1810-clk
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,cv1800.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3002000 {
+        compatible = "sophgo,cv1800-clk";
+        reg = <0x03002000 0x1000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
new file mode 100644
index 000000000000..e7a9255bcb58
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-clkgen.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Clock Generator for divider/mux/gate
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main PLL
+      - description: Fixed PLL
+      - description: DDR PLL 0
+      - description: DDR PLL 1
+
+  clock-names:
+    items:
+      - const: mpll
+      - const: fpll
+      - const: dpll0
+      - const: dpll1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-clkgen.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@30012000 {
+      compatible = "sophgo,sg2042-clkgen";
+      reg = <0x30012000 0x1000>;
+      clocks = <&pllclk 0>,
+               <&pllclk 1>,
+               <&pllclk 2>,
+               <&pllclk 3>;
+      clock-names = "mpll",
+                    "fpll",
+                    "dpll0",
+                    "dpll1";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml
new file mode 100644
index 000000000000..1a417a627dd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-pll.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 PLL Clock Generator
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Oscillator(Clock Generation IC) for Main/Fixed PLL (25 MHz)
+      - description: Oscillator(Clock Generation IC) for DDR PLL 0 (25 MHz)
+      - description: Oscillator(Clock Generation IC) for DDR PLL 1 (25 MHz)
+
+  clock-names:
+    items:
+      - const: cgi_main
+      - const: cgi_dpll0
+      - const: cgi_dpll1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-pll.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+      compatible = "sophgo,sg2042-pll";
+      reg = <0x10000000 0x10000>;
+      clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>;
+      clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml
new file mode 100644
index 000000000000..1491fb8ef6a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,sg2042-rpgate.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-rpgate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Gate Clock Generator for RP(riscv processors) subsystem
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-rpgate
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Gate clock for RP subsystem
+
+  clock-names:
+    items:
+      - const: rpgate
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-rpgate.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@20000000 {
+      compatible = "sophgo,sg2042-rpgate";
+      reg = <0x20000000 0x10000>;
+      clocks = <&clkgen 85>;
+      clock-names = "rpgate";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
new file mode 100644
index 000000000000..272e58bdb62c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sophgo,sg2044-clk.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2044-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2044 Clock Controller
+
+maintainers:
+  - Inochi Amaoto <inochiama@gmail.com>
+
+description: |
+  The Sophgo SG2044 clock controller requires an external oscillator
+  as input clock.
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/sophgo,sg2044-clk.h
+
+properties:
+  compatible:
+    const: sophgo,sg2044-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fpll0
+      - description: fpll1
+      - description: fpll2
+      - description: dpll0
+      - description: dpll1
+      - description: dpll2
+      - description: dpll3
+      - description: dpll4
+      - description: dpll5
+      - description: dpll6
+      - description: dpll7
+      - description: mpll0
+      - description: mpll1
+      - description: mpll2
+      - description: mpll3
+      - description: mpll4
+      - description: mpll5
+
+  clock-names:
+    items:
+      - const: fpll0
+      - const: fpll1
+      - const: fpll2
+      - const: dpll0
+      - const: dpll1
+      - const: dpll2
+      - const: dpll3
+      - const: dpll4
+      - const: dpll5
+      - const: dpll6
+      - const: dpll7
+      - const: mpll0
+      - const: mpll1
+      - const: mpll2
+      - const: mpll3
+      - const: mpll4
+      - const: mpll5
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,sg2044-pll.h>
+
+    clock-controller@50002000 {
+      compatible = "sophgo,sg2044-clk";
+      reg = <0x50002000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&syscon CLK_FPLL0>, <&syscon CLK_FPLL1>,
+               <&syscon CLK_FPLL2>, <&syscon CLK_DPLL0>,
+               <&syscon CLK_DPLL1>, <&syscon CLK_DPLL2>,
+               <&syscon CLK_DPLL3>, <&syscon CLK_DPLL4>,
+               <&syscon CLK_DPLL5>, <&syscon CLK_DPLL6>,
+               <&syscon CLK_DPLL7>, <&syscon CLK_MPLL0>,
+               <&syscon CLK_MPLL1>, <&syscon CLK_MPLL2>,
+               <&syscon CLK_MPLL3>, <&syscon CLK_MPLL4>,
+               <&syscon CLK_MPLL5>;
+      clock-names = "fpll0", "fpll1", "fpll2", "dpll0",
+                    "dpll1", "dpll2", "dpll3", "dpll4",
+                    "dpll5", "dpll6", "dpll7", "mpll0",
+                    "mpll1", "mpll2", "mpll3", "mpll4",
+                    "mpll5";
+    };
diff --git a/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
new file mode 100644
index 000000000000..06bafd68c00a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/spacemit,k1-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 PLL
+
+maintainers:
+  - Haylen Chu <heylenay@4d2.org>
+
+properties:
+  compatible:
+    const: spacemit,k1-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: External 24MHz oscillator
+
+  spacemit,mpmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the "Main PMU (MPMU)" syscon. It is used to check PLL
+      lock status.
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/spacemit,k1-syscon.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - spacemit,mpmu
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4090000 {
+        compatible = "spacemit,k1-pll";
+        reg = <0xd4090000 0x1000>;
+        clocks = <&vctcxo_24m>;
+        spacemit,mpmu = <&sysctl_mpmu>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
deleted file mode 100644
index aaaf02ca2a6a..000000000000
--- a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum SC9860 Clock Binding
-------------------------
-
-Required properties:
-- compatible: should contain the following compatible strings:
-	- "sprd,sc9860-pmu-gate"
-	- "sprd,sc9860-pll"
-	- "sprd,sc9860-ap-clk"
-	- "sprd,sc9860-aon-prediv"
-	- "sprd,sc9860-apahb-gate"
-	- "sprd,sc9860-aon-gate"
-	- "sprd,sc9860-aonsecure-clk"
-	- "sprd,sc9860-agcp-gate"
-	- "sprd,sc9860-gpu-clk"
-	- "sprd,sc9860-vsp-clk"
-	- "sprd,sc9860-vsp-gate"
-	- "sprd,sc9860-cam-clk"
-	- "sprd,sc9860-cam-gate"
-	- "sprd,sc9860-disp-clk"
-	- "sprd,sc9860-disp-gate"
-	- "sprd,sc9860-apapb-gate"
-
-- #clock-cells: must be 1
-
-- clocks : Should be the input parent clock(s) phandle for the clock, this
-	   property here just simply shows which clock group the clocks'
-	   parents are in, since each clk node would represent many clocks
-	   which are defined in the driver.  The detailed dependency
-	   relationship (i.e. how many parents and which are the parents)
-	   are implemented in driver code.
-
-Optional properties:
-
-- reg:	Contain the registers base address and length. It must be configured
-	only if no 'sprd,syscon' under the node.
-
-- sprd,syscon: phandle to the syscon which is in the same address area with
-	       the clock, and so we can get regmap for the clocks from the
-	       syscon device.
-
-Example:
-
-	pmu_gate: pmu-gate {
-		compatible = "sprd,sc9860-pmu-gate";
-		sprd,syscon = <&pmu_regs>;
-		clocks = <&ext_26m>;
-		#clock-cells = <1>;
-	};
-
-	pll: pll {
-		compatible = "sprd,sc9860-pll";
-		sprd,syscon = <&ana_regs>;
-		clocks = <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
-
-	ap_clk: clock-controller@20000000 {
-		compatible = "sprd,sc9860-ap-clk";
-		reg = <0 0x20000000 0 0x400>;
-		clocks = <&ext_26m>, <&pll 0>,
-			 <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml
new file mode 100644
index 000000000000..502cd723511f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,sc9860-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 clock
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-agcp-gate
+      - sprd,sc9860-aonsecure-clk
+      - sprd,sc9860-aon-gate
+      - sprd,sc9860-aon-prediv
+      - sprd,sc9860-apahb-gate
+      - sprd,sc9860-apapb-gate
+      - sprd,sc9860-ap-clk
+      - sprd,sc9860-cam-clk
+      - sprd,sc9860-cam-gate
+      - sprd,sc9860-disp-clk
+      - sprd,sc9860-disp-gate
+      - sprd,sc9860-gpu-clk
+      - sprd,sc9860-pll
+      - sprd,sc9860-pmu-gate
+      - sprd,sc9860-vsp-clk
+      - sprd,sc9860-vsp-gate
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  sprd,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the syscon which is in the same address area with the
+      clock, and so we can get regmap for the clocks from the syscon device
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-agcp-gate
+              - sprd,sc9860-aon-gate
+              - sprd,sc9860-apahb-gate
+              - sprd,sc9860-apapb-gate
+              - sprd,sc9860-cam-gate
+              - sprd,sc9860-disp-gate
+              - sprd,sc9860-gpu-clk
+              - sprd,sc9860-pll
+              - sprd,sc9860-pmu-gate
+              - sprd,sc9860-vsp-gate
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aonsecure-clk
+              - sprd,sc9860-cam-clk
+              - sprd,sc9860-disp-clk
+              - sprd,sc9860-vsp-clk
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aon-prediv
+              - sprd,sc9860-ap-clk
+    then:
+      properties:
+        clocks:
+          minItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aonsecure-clk
+              - sprd,sc9860-aon-prediv
+              - sprd,sc9860-ap-clk
+              - sprd,sc9860-cam-clk
+              - sprd,sc9860-disp-clk
+              - sprd,sc9860-gpu-clk
+              - sprd,sc9860-vsp-clk
+    then:
+      required:
+        - reg
+      properties:
+        sprd,syscon: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-agcp-gate
+              - sprd,sc9860-aon-gate
+              - sprd,sc9860-apahb-gate
+              - sprd,sc9860-apapb-gate
+              - sprd,sc9860-cam-gate
+              - sprd,sc9860-disp-gate
+              - sprd,sc9860-pll
+              - sprd,sc9860-pmu-gate
+              - sprd,sc9860-vsp-gate
+    then:
+      required:
+        - sprd,syscon
+      properties:
+        reg: false
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pmu-gate {
+        compatible = "sprd,sc9860-pmu-gate";
+        clocks = <&ext_26m>;
+        #clock-cells = <1>;
+        sprd,syscon = <&pmu_regs>;
+      };
+
+      clock-controller@20000000 {
+        compatible = "sprd,sc9860-ap-clk";
+        reg = <0 0x20000000 0 0x400>;
+        clocks = <&ext_26m>, <&pll 0>, <&pmu_gate 0>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index 47e1ab08c95d..a0658056c330 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -2,10 +2,10 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SC9863A Clock Control Unit Device Tree Bindings
+title: SC9863A Clock Control Unit
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
@@ -66,7 +66,7 @@ then:
 else:
   description: |
     Other SC9863a clock nodes should be the child of a syscon node in
-    which compatible string shoule be:
+    which compatible string should be:
             "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
 
     The 'reg' property for the clock node is also required if there is a sub
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 000000000000..43d2b6c31357
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
deleted file mode 100644
index cfa04b614d8a..000000000000
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-STMicroelectronics STM32 Reset and Clock Controller
-===================================================
-
-The RCC IP is both a reset and a clock controller.
-
-Please refer to clock-bindings.txt for common clock controller binding usage.
-Please also refer to reset.txt for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be:
-  "st,stm32f42xx-rcc"
-  "st,stm32f469-rcc"
-  "st,stm32f746-rcc"
-  "st,stm32f769-rcc"
-
-- reg: should be register base and length as documented in the
-  datasheet
-- #reset-cells: 1, see below
-- #clock-cells: 2, device nodes should specify the clock in their "clocks"
-  property, containing a phandle to the clock device node, an index selecting
-  between gated clocks and other clocks and an index specifying the clock to
-  use.
-- clocks: External oscillator clock phandle
-  - high speed external clock signal (HSE)
-  - external I2S clock (I2S_CKIN)
-
-Example:
-
-	rcc: rcc@40023800 {
-		#reset-cells = <1>;
-		#clock-cells = <2>
-		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
-		reg = <0x40023800 0x400>;
-		clocks = <&clk_hse>, <&clk_i2s_ckin>;
-	};
-
-Specifying gated clocks
-=======================
-
-The primary index must be set to 0.
-
-The secondary index is the bit number within the RCC register bank, starting
-from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
-
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
-
-To simplify the usage and to share bit definition with the reset and clock
-drivers of the RCC IP, macros are available to generate the index in
-human-readble format.
-
-For STM32F4 series, the macro are available here:
- - include/dt-bindings/mfd/stm32f4-rcc.h
-
-Example:
-
-	/* Gated clock, AHB1 bit 0 (GPIOA) */
-	... {
-		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
-	};
-
-	/* Gated clock, AHB2 bit 4 (CRYP) */
-	... {
-		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
-	};
-
-Specifying other clocks
-=======================
-
-The primary index must be set to 1.
-
-The secondary index is bound with the following magic numbers:
-
-	0	SYSTICK
-	1	FCLK
-	2	CLK_LSI		(low-power clock source)
-	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
-				 crystal or ceramic resonator)
-	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
-	5	CLK_RTC		(real-time clock)
-	6	PLL_VCO_I2S	(vco frequency of I2S pll)
-	7	PLL_VCO_SAI	(vco frequency of SAI pll)
-	8	CLK_LCD		(LCD-TFT)
-	9	CLK_I2S		(I2S clocks)
-	10	CLK_SAI1	(audio clocks)
-	11	CLK_SAI2
-	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
-	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
-
-	14	CLK_HSI		(Internal ocscillator clock)
-	15	CLK_SYSCLK	(System Clock)
-	16	CLK_HDMI_CEC	(HDMI-CEC clock)
-	17	CLK_SPDIF	(SPDIF-Rx clock)
-	18	CLK_USART1	(U(s)arts clocks)
-	19	CLK_USART2
-	20	CLK_USART3
-	21	CLK_UART4
-	22	CLK_UART5
-	23	CLK_USART6
-	24	CLK_UART7
-	25	CLK_UART8
-	26	CLK_I2C1	(I2S clocks)
-	27	CLK_I2C2
-	28	CLK_I2C3
-	29	CLK_I2C4
-	30	CLK_LPTIMER	(LPTimer1 clock)
-	31	CLK_PLL_SRC
-	32	CLK_DFSDM1
-	33	CLK_ADFSDM1
-	34	CLK_F769_DSI
-)
-
-Example:
-
-	/* Misc clock, FCLK */
-	... {
-		clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
-	};
-
-
-Specifying softreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the reset device node and an index specifying
-which channel to use.
-The index is the bit number within the RCC registers bank, starting from RCC
-base address.
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register.
-For example, for CRC reset:
-  crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
-
-example:
-
-	timer2 {
-		resets	= <&rcc STM32F4_APB1_RESET(TIM2)>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml
new file mode 100644
index 000000000000..f83a6120d65a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Reset Clock Controller
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+description: |
+  The RCC IP is both a reset and a clock controller.
+  The reset phandle argument is the bit number within the RCC registers bank,
+  starting from RCC base address.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32f42xx-rcc
+              - st,stm32f746-rcc
+              - st,stm32h743-rcc
+          - const: st,stm32-rcc
+      - items:
+          - enum:
+              - st,stm32f469-rcc
+          - const: st,stm32f42xx-rcc
+          - const: st,stm32-rcc
+      - items:
+          - enum:
+              - st,stm32f769-rcc
+          - const: st,stm32f746-rcc
+          - const: st,stm32-rcc
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#clock-cells':
+    enum: [1, 2]
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  st,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to system configuration controller. It can be used to control the
+      power domain circuitry.
+
+  st,ssc-modfreq-hz:
+    description:
+      The modulation frequency for main PLL (in Hz)
+
+  st,ssc-moddepth-permyriad:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The modulation rate for main PLL (in permyriad, i.e. 0.01%)
+    minimum: 25
+    maximum: 200
+
+  st,ssc-modmethod:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The modulation techniques for main PLL.
+    items:
+      enum:
+        - center-spread
+        - down-spread
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+  - '#clock-cells'
+  - clocks
+  - st,syscfg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h743-rcc
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+          description: |
+            The clock index for the specified type.
+        clocks:
+          items:
+            - description: high speed external (HSE) clock input
+            - description: low speed external (LSE) clock input
+            - description: Inter-IC sound (I2S) clock input
+        st,ssc-modfreq-hz: false
+        st,ssc-moddepth-permyriad: false
+        st,ssc-modmethod: false
+
+    else:
+      properties:
+        '#clock-cells':
+          const: 2
+          description: |
+            - The first cell is the clock type, possible values are 0 for
+              gated clocks and 1 otherwise.
+            - The second cell is the clock index for the specified type.
+        clocks:
+          items:
+            - description: high speed external (HSE) clock input
+            - description: Inter-IC sound (I2S) clock input
+
+additionalProperties: false
+
+examples:
+  # Reset and Clock Control Module node:
+  - |
+    clock-controller@40023800 {
+        compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+        reg = <0x40023800 0x400>;
+        #clock-cells = <2>;
+        #reset-cells = <1>;
+        clocks = <&clk_hse>, <&clk_i2s_ckin>;
+        st,syscfg = <&pwrcfg>;
+        st,ssc-modfreq-hz = <10000>;
+        st,ssc-moddepth-permyriad = <200>;
+        st,ssc-modmethod = "center-spread";
+    };
+  - |
+    clock-controller@58024400 {
+        compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+        reg = <0x58024400 0x400>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+        st,syscfg = <&pwrcfg>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
deleted file mode 100644
index cac24ee10b72..000000000000
--- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-STMicroelectronics STM32H7 Reset and Clock Controller
-=====================================================
-
-The RCC IP is both a reset and a clock controller.
-
-Please refer to clock-bindings.txt for common clock controller binding usage.
-Please also refer to reset.txt for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be:
-  "st,stm32h743-rcc"
-
-- reg: should be register base and length as documented in the
-  datasheet
-
-- #reset-cells: 1, see below
-
-- #clock-cells : from common clock binding; shall be set to 1
-
-- clocks: External oscillator clock phandle
-  - high speed external clock signal (HSE)
-  - low speed external clock signal (LSE)
-  - external I2S clock (I2S_CKIN)
-
-Optional properties:
-- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
-  write protection (RTC clock).
-
-Example:
-
-	rcc: reset-clock-controller@58024400 {
-		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
-		reg = <0x58024400 0x400>;
-		#reset-cells = <1>;
-		#clock-cells = <1>;
-		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
-
-		st,syscfg = <&pwrcfg>;
-};
-
-The peripheral clock consumer should specify the desired clock by
-having the clock ID in its "clocks" phandle cell.
-
-Example:
-
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc TIM5_CK>;
-		};
-
-Specifying softreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the reset device node and an index specifying
-which channel to use.
-The index is the bit number within the RCC registers bank, starting from RCC
-base address.
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register.
-
-For example, for CRC reset:
-  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
-
-Example:
-
-	timer2 {
-		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index a0ae4867ed27..e72f46e79b90 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Reset Clock Controller Binding
+title: STMicroelectronics STM32MP1 Reset Clock Controller
 
 maintainers:
   - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
@@ -21,7 +21,7 @@ description: |
   =================
 
   All available clocks are defined as preprocessor macros in
-  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+  include/dt-bindings/clock/stm32mp1-clks.h header and can be used in device
   tree sources.
 
   Specifying softreset control of devices
@@ -40,7 +40,8 @@ description: |
           = 0x180 / 4 * 32 + 0 = 3072
 
   The list of valid indices for STM32MP1 is available in:
-  include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset/stm32mp1-resets.h
+  include/dt-bindings/reset/stm32mp13-resets.h
 
   This file implements defines like:
   #define LTDC_R	3072
@@ -57,8 +58,17 @@ properties:
       - enum:
           - st,stm32mp1-rcc-secure
           - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
       - const: syscon
 
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
   reg:
     maxItems: 1
 
@@ -68,14 +78,54 @@ required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
     rcc: rcc@50000000 {
         compatible = "st,stm32mp1-rcc-secure", "syscon";
         reg = <0x50000000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml
new file mode 100644
index 000000000000..4368063c6709
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp21-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP21 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC hardware block is both a reset and a clock controller.
+  RCC makes also power management (resume/suspend).
+
+  See also:
+    include/dt-bindings/clock/st,stm32mp21-rcc.h
+    include/dt-bindings/reset/st,stm32mp21-rcc.h
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp21-rcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: CK_SCMI_HSE High Speed External oscillator (8 to 48 MHz)
+      - description: CK_SCMI_HSI High Speed Internal oscillator (~ 64 MHz)
+      - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
+      - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
+      - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+      - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (could be gated)
+      - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock
+      - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock
+      - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock
+      - description: CK_SCMI_ICN_DDR DDR interconnect bus clock
+      - description: CK_SCMI_ICN_DISPLAY Display interconnect bus clock
+      - description: CK_SCMI_ICN_HSL HSL interconnect bus clock
+      - description: CK_SCMI_ICN_NIC NIC interconnect bus clock
+      - description: CK_SCMI_FLEXGEN_07 flexgen clock 7
+      - description: CK_SCMI_FLEXGEN_08 flexgen clock 8
+      - description: CK_SCMI_FLEXGEN_09 flexgen clock 9
+      - description: CK_SCMI_FLEXGEN_10 flexgen clock 10
+      - description: CK_SCMI_FLEXGEN_11 flexgen clock 11
+      - description: CK_SCMI_FLEXGEN_12 flexgen clock 12
+      - description: CK_SCMI_FLEXGEN_13 flexgen clock 13
+      - description: CK_SCMI_FLEXGEN_14 flexgen clock 14
+      - description: CK_SCMI_FLEXGEN_16 flexgen clock 16
+      - description: CK_SCMI_FLEXGEN_17 flexgen clock 17
+      - description: CK_SCMI_FLEXGEN_18 flexgen clock 18
+      - description: CK_SCMI_FLEXGEN_19 flexgen clock 19
+      - description: CK_SCMI_FLEXGEN_20 flexgen clock 20
+      - description: CK_SCMI_FLEXGEN_21 flexgen clock 21
+      - description: CK_SCMI_FLEXGEN_22 flexgen clock 22
+      - description: CK_SCMI_FLEXGEN_23 flexgen clock 23
+      - description: CK_SCMI_FLEXGEN_24 flexgen clock 24
+      - description: CK_SCMI_FLEXGEN_25 flexgen clock 25
+      - description: CK_SCMI_FLEXGEN_26 flexgen clock 26
+      - description: CK_SCMI_FLEXGEN_27 flexgen clock 27
+      - description: CK_SCMI_FLEXGEN_29 flexgen clock 29
+      - description: CK_SCMI_FLEXGEN_30 flexgen clock 30
+      - description: CK_SCMI_FLEXGEN_31 flexgen clock 31
+      - description: CK_SCMI_FLEXGEN_33 flexgen clock 33
+      - description: CK_SCMI_FLEXGEN_36 flexgen clock 36
+      - description: CK_SCMI_FLEXGEN_37 flexgen clock 37
+      - description: CK_SCMI_FLEXGEN_38 flexgen clock 38
+      - description: CK_SCMI_FLEXGEN_39 flexgen clock 39
+      - description: CK_SCMI_FLEXGEN_40 flexgen clock 40
+      - description: CK_SCMI_FLEXGEN_41 flexgen clock 41
+      - description: CK_SCMI_FLEXGEN_42 flexgen clock 42
+      - description: CK_SCMI_FLEXGEN_43 flexgen clock 43
+      - description: CK_SCMI_FLEXGEN_44 flexgen clock 44
+      - description: CK_SCMI_FLEXGEN_45 flexgen clock 45
+      - description: CK_SCMI_FLEXGEN_46 flexgen clock 46
+      - description: CK_SCMI_FLEXGEN_47 flexgen clock 47
+      - description: CK_SCMI_FLEXGEN_48 flexgen clock 48
+      - description: CK_SCMI_FLEXGEN_50 flexgen clock 50
+      - description: CK_SCMI_FLEXGEN_51 flexgen clock 51
+      - description: CK_SCMI_FLEXGEN_52 flexgen clock 52
+      - description: CK_SCMI_FLEXGEN_53 flexgen clock 53
+      - description: CK_SCMI_FLEXGEN_54 flexgen clock 54
+      - description: CK_SCMI_FLEXGEN_55 flexgen clock 55
+      - description: CK_SCMI_FLEXGEN_56 flexgen clock 56
+      - description: CK_SCMI_FLEXGEN_57 flexgen clock 57
+      - description: CK_SCMI_FLEXGEN_58 flexgen clock 58
+      - description: CK_SCMI_FLEXGEN_61 flexgen clock 61
+      - description: CK_SCMI_FLEXGEN_62 flexgen clock 62
+      - description: CK_SCMI_FLEXGEN_63 flexgen clock 63
+      - description: CK_SCMI_ICN_APB1 Peripheral bridge 1
+      - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
+      - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
+      - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
+      - description: CK_SCMI_ICN_APB5 Peripheral bridge 5
+      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for debug
+      - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
+      - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
+
+  access-controllers:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp21-rcc.h>
+
+    clock-controller@44200000 {
+        compatible = "st,stm32mp21-rcc";
+        reg = <0x44200000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clocks =  <&scmi_clk CK_SCMI_HSE>,
+                  <&scmi_clk CK_SCMI_HSI>,
+                  <&scmi_clk CK_SCMI_MSI>,
+                  <&scmi_clk CK_SCMI_LSE>,
+                  <&scmi_clk CK_SCMI_LSI>,
+                  <&scmi_clk CK_SCMI_HSE_DIV2>,
+                  <&scmi_clk CK_SCMI_ICN_HS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_LS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_SDMMC>,
+                  <&scmi_clk CK_SCMI_ICN_DDR>,
+                  <&scmi_clk CK_SCMI_ICN_DISPLAY>,
+                  <&scmi_clk CK_SCMI_ICN_HSL>,
+                  <&scmi_clk CK_SCMI_ICN_NIC>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_07>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_08>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_09>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_10>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_11>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_12>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_13>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_14>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_16>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_17>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_18>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_19>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_20>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_21>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_22>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_23>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_24>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_25>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_26>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_27>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_29>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_30>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_31>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_33>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_36>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_37>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_38>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_39>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_40>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_41>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_42>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_43>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_44>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_45>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_46>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_47>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_48>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_50>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_51>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_52>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_53>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_54>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_55>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_56>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_57>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_58>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_61>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_62>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_63>,
+                  <&scmi_clk CK_SCMI_ICN_APB1>,
+                  <&scmi_clk CK_SCMI_ICN_APB2>,
+                  <&scmi_clk CK_SCMI_ICN_APB3>,
+                  <&scmi_clk CK_SCMI_ICN_APB4>,
+                  <&scmi_clk CK_SCMI_ICN_APB5>,
+                  <&scmi_clk CK_SCMI_ICN_APBDBG>,
+                  <&scmi_clk CK_SCMI_TIMG1>,
+                  <&scmi_clk CK_SCMI_TIMG2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
new file mode 100644
index 000000000000..1e3b5d218bb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC hardware block is both a reset and a clock controller.
+  RCC makes also power management (resume/suspend).
+
+  See also:
+    include/dt-bindings/clock/st,stm32mp25-rcc.h
+    include/dt-bindings/reset/st,stm32mp25-rcc.h
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-rcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: CK_SCMI_HSE High Speed External oscillator (8 to 48 MHz)
+      - description: CK_SCMI_HSI High Speed Internal oscillator (~ 64 MHz)
+      - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
+      - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
+      - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
+      - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (could be gated)
+      - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock
+      - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock
+      - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock
+      - description: CK_SCMI_ICN_DDR DDR interconnect bus clock
+      - description: CK_SCMI_ICN_DISPLAY Display interconnect bus clock
+      - description: CK_SCMI_ICN_HSL HSL interconnect bus clock
+      - description: CK_SCMI_ICN_NIC NIC interconnect bus clock
+      - description: CK_SCMI_ICN_VID Video interconnect bus clock
+      - description: CK_SCMI_FLEXGEN_07 flexgen clock 7
+      - description: CK_SCMI_FLEXGEN_08 flexgen clock 8
+      - description: CK_SCMI_FLEXGEN_09 flexgen clock 9
+      - description: CK_SCMI_FLEXGEN_10 flexgen clock 10
+      - description: CK_SCMI_FLEXGEN_11 flexgen clock 11
+      - description: CK_SCMI_FLEXGEN_12 flexgen clock 12
+      - description: CK_SCMI_FLEXGEN_13 flexgen clock 13
+      - description: CK_SCMI_FLEXGEN_14 flexgen clock 14
+      - description: CK_SCMI_FLEXGEN_15 flexgen clock 15
+      - description: CK_SCMI_FLEXGEN_16 flexgen clock 16
+      - description: CK_SCMI_FLEXGEN_17 flexgen clock 17
+      - description: CK_SCMI_FLEXGEN_18 flexgen clock 18
+      - description: CK_SCMI_FLEXGEN_19 flexgen clock 19
+      - description: CK_SCMI_FLEXGEN_20 flexgen clock 20
+      - description: CK_SCMI_FLEXGEN_21 flexgen clock 21
+      - description: CK_SCMI_FLEXGEN_22 flexgen clock 22
+      - description: CK_SCMI_FLEXGEN_23 flexgen clock 23
+      - description: CK_SCMI_FLEXGEN_24 flexgen clock 24
+      - description: CK_SCMI_FLEXGEN_25 flexgen clock 25
+      - description: CK_SCMI_FLEXGEN_26 flexgen clock 26
+      - description: CK_SCMI_FLEXGEN_27 flexgen clock 27
+      - description: CK_SCMI_FLEXGEN_28 flexgen clock 28
+      - description: CK_SCMI_FLEXGEN_29 flexgen clock 29
+      - description: CK_SCMI_FLEXGEN_30 flexgen clock 30
+      - description: CK_SCMI_FLEXGEN_31 flexgen clock 31
+      - description: CK_SCMI_FLEXGEN_32 flexgen clock 32
+      - description: CK_SCMI_FLEXGEN_33 flexgen clock 33
+      - description: CK_SCMI_FLEXGEN_34 flexgen clock 34
+      - description: CK_SCMI_FLEXGEN_35 flexgen clock 35
+      - description: CK_SCMI_FLEXGEN_36 flexgen clock 36
+      - description: CK_SCMI_FLEXGEN_37 flexgen clock 37
+      - description: CK_SCMI_FLEXGEN_38 flexgen clock 38
+      - description: CK_SCMI_FLEXGEN_39 flexgen clock 39
+      - description: CK_SCMI_FLEXGEN_40 flexgen clock 40
+      - description: CK_SCMI_FLEXGEN_41 flexgen clock 41
+      - description: CK_SCMI_FLEXGEN_42 flexgen clock 42
+      - description: CK_SCMI_FLEXGEN_43 flexgen clock 43
+      - description: CK_SCMI_FLEXGEN_44 flexgen clock 44
+      - description: CK_SCMI_FLEXGEN_45 flexgen clock 45
+      - description: CK_SCMI_FLEXGEN_46 flexgen clock 46
+      - description: CK_SCMI_FLEXGEN_47 flexgen clock 47
+      - description: CK_SCMI_FLEXGEN_48 flexgen clock 48
+      - description: CK_SCMI_FLEXGEN_49 flexgen clock 49
+      - description: CK_SCMI_FLEXGEN_50 flexgen clock 50
+      - description: CK_SCMI_FLEXGEN_51 flexgen clock 51
+      - description: CK_SCMI_FLEXGEN_52 flexgen clock 52
+      - description: CK_SCMI_FLEXGEN_53 flexgen clock 53
+      - description: CK_SCMI_FLEXGEN_54 flexgen clock 54
+      - description: CK_SCMI_FLEXGEN_55 flexgen clock 55
+      - description: CK_SCMI_FLEXGEN_56 flexgen clock 56
+      - description: CK_SCMI_FLEXGEN_57 flexgen clock 57
+      - description: CK_SCMI_FLEXGEN_58 flexgen clock 58
+      - description: CK_SCMI_FLEXGEN_59 flexgen clock 59
+      - description: CK_SCMI_FLEXGEN_60 flexgen clock 60
+      - description: CK_SCMI_FLEXGEN_61 flexgen clock 61
+      - description: CK_SCMI_FLEXGEN_62 flexgen clock 62
+      - description: CK_SCMI_FLEXGEN_63 flexgen clock 63
+      - description: CK_SCMI_ICN_APB1 Peripheral bridge 1
+      - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
+      - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
+      - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
+      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for debug
+      - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
+      - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
+      - description: CK_SCMI_PLL3 PLL3 clock
+      - description: clk_dsi_txbyte DSI byte clock
+
+  access-controllers:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+
+    clock-controller@44200000 {
+        compatible = "st,stm32mp25-rcc";
+        reg = <0x44200000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clocks =  <&scmi_clk CK_SCMI_HSE>,
+                  <&scmi_clk CK_SCMI_HSI>,
+                  <&scmi_clk CK_SCMI_MSI>,
+                  <&scmi_clk CK_SCMI_LSE>,
+                  <&scmi_clk CK_SCMI_LSI>,
+                  <&scmi_clk CK_SCMI_HSE_DIV2>,
+                  <&scmi_clk CK_SCMI_ICN_HS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_LS_MCU>,
+                  <&scmi_clk CK_SCMI_ICN_SDMMC>,
+                  <&scmi_clk CK_SCMI_ICN_DDR>,
+                  <&scmi_clk CK_SCMI_ICN_DISPLAY>,
+                  <&scmi_clk CK_SCMI_ICN_HSL>,
+                  <&scmi_clk CK_SCMI_ICN_NIC>,
+                  <&scmi_clk CK_SCMI_ICN_VID>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_07>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_08>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_09>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_10>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_11>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_12>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_13>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_14>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_15>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_16>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_17>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_18>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_19>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_20>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_21>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_22>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_23>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_24>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_25>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_26>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_27>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_28>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_29>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_30>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_31>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_32>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_33>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_34>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_35>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_36>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_37>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_38>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_39>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_40>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_41>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_42>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_43>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_44>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_45>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_46>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_47>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_48>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_49>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_50>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_51>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_52>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_53>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_54>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_55>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_56>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_57>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_58>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_59>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_60>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_61>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_62>,
+                  <&scmi_clk CK_SCMI_FLEXGEN_63>,
+                  <&scmi_clk CK_SCMI_ICN_APB1>,
+                  <&scmi_clk CK_SCMI_ICN_APB2>,
+                  <&scmi_clk CK_SCMI_ICN_APB3>,
+                  <&scmi_clk CK_SCMI_ICN_APB4>,
+                  <&scmi_clk CK_SCMI_ICN_APBDBG>,
+                  <&scmi_clk CK_SCMI_TIMG1>,
+                  <&scmi_clk CK_SCMI_TIMG2>,
+                  <&scmi_clk CK_SCMI_PLL3>,
+                  <&clk_dsi_txbyte>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 55a18939bddd..a9d1c19f30a3 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -64,12 +64,9 @@ Required properties:
   audio use case)
   "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
 					and activate synchronous mode)
-  "st,flexgen-stih407-a0"
   "st,flexgen-stih410-a0"
-  "st,flexgen-stih407-c0"
   "st,flexgen-stih410-c0"
   "st,flexgen-stih418-c0"
-  "st,flexgen-stih407-d0"
   "st,flexgen-stih410-d0"
   "st,flexgen-stih407-d2"
   "st,flexgen-stih418-d2"
@@ -78,7 +75,7 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
 
-- clocks : must be set to the parent's phandle. it's could be output clocks of
+- clocks : must be set to the parent's phandle. it could be output clocks of
   a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
 
 - clock-output-names : List of strings used to name the clock outputs.
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 000000000000..8f49a1ae03f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 000000000000..12f17b60ecbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
new file mode 100644
index 000000000000..923680a44aef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Always-On Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aoncrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB or GMAC0 RGMII RX
+          - description: APB Bus or STG AXI/AHB
+          - description: GMAC0 GTX or APB Bus
+          - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference
+          - description: GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+          - description: RTC Oscillator (32.768 kHz)
+
+  clock-names:
+    oneOf:
+      - minItems: 5
+        items:
+          - const: osc
+          - enum:
+              - gmac0_rmii_refin
+              - gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+      - minItems: 6
+        items:
+          - const: osc
+          - const: gmac0_rmii_refin
+          - const: gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    clock-controller@17000000 {
+        compatible = "starfive,jh7110-aoncrg";
+        reg = <0x17000000 0x10000>;
+        clocks = <&osc>, <&gmac0_rmii_refin>,
+                 <&gmac0_rgmii_rxin>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>,
+                 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+                 <&rtc_osc>;
+        clock-names = "osc", "gmac0_rmii_refin",
+                      "gmac0_rgmii_rxin", "stg_axiahb",
+                      "apb_bus", "gmac0_gtxclk",
+                      "rtc_osc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
new file mode 100644
index 000000000000..3b8b85be5cd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-ispcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+      - description: external DVP
+
+  clock-names:
+    items:
+      - const: isp_top_core
+      - const: isp_top_axi
+      - const: noc_bus_isp_axi
+      - const: dvp_clk
+
+  resets:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      ISP domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    ispcrg: clock-controller@19810000 {
+        compatible = "starfive,jh7110-ispcrg";
+        reg = <0x19810000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+                 <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>,
+                 <&dvp_clk>;
+        clock-names = "isp_top_core", "isp_top_axi",
+                      "noc_bus_isp_axi", "dvp_clk";
+        resets = <&syscrg JH7110_SYSRST_ISP_TOP>,
+                 <&syscrg JH7110_SYSRST_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_ISP>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 000000000000..be8300ce86d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
new file mode 100644
index 000000000000..b64ccd84200a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System-Top-Group Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-stgcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (24 MHz)
+      - description: HIFI4 core
+      - description: STG AXI/AHB
+      - description: USB (125 MHz)
+      - description: CPU Bus
+      - description: HIFI4 Axi
+      - description: NOC STG Bus
+      - description: APB Bus
+
+  clock-names:
+    items:
+      - const: osc
+      - const: hifi4_core
+      - const: stg_axiahb
+      - const: usb_125m
+      - const: cpu_bus
+      - const: hifi4_axi
+      - const: nocstg_bus
+      - const: apb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    stgcrg: clock-controller@10230000 {
+        compatible = "starfive,jh7110-stgcrg";
+        reg = <0x10230000 0x10000>;
+        clocks = <&osc>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_CORE>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_USB_125M>,
+                 <&syscrg JH7110_SYSCLK_CPU_BUS>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOCSTG_BUS>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>;
+        clock-names = "osc", "hifi4_core",
+                      "stg_axiahb", "usb_125m",
+                      "cpu_bus", "hifi4_axi",
+                      "nocstg_bus", "apb_bus";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
new file mode 100644
index 000000000000..5ba0a885aa80
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-syscrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-syscrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference or GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference
+          - description: GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: osc
+          - enum:
+              - gmac1_rmii_refin
+              - gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+      - items:
+          - const: osc
+          - const: gmac1_rmii_refin
+          - const: gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13020000 {
+        compatible = "starfive,jh7110-syscrg";
+        reg = <0x13020000 0x10000>;
+        clocks = <&osc>, <&gmac1_rmii_refin>,
+                 <&gmac1_rgmii_rxin>,
+                 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+                 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+                 <&tdm_ext>, <&mclk_ext>,
+                 <&pllclk 0>, <&pllclk 1>, <&pllclk 2>;
+        clock-names = "osc", "gmac1_rmii_refin",
+                      "gmac1_rgmii_rxin",
+                      "i2stx_bclk_ext", "i2stx_lrck_ext",
+                      "i2srx_bclk_ext", "i2srx_lrck_ext",
+                      "tdm_ext", "mclk_ext",
+                      "pll0_out", "pll1_out", "pll2_out";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml
new file mode 100644
index 000000000000..af77bd8c86b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Video-Output Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-voutcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Vout Top core
+      - description: Vout Top Ahb
+      - description: Vout Top Axi
+      - description: Vout Top HDMI MCLK
+      - description: I2STX0 BCLK
+      - description: external HDMI pixel
+
+  clock-names:
+    items:
+      - const: vout_src
+      - const: vout_top_ahb
+      - const: vout_top_axi
+      - const: vout_top_hdmitx0_mclk
+      - const: i2stx0_bclk
+      - const: hdmitx0_pixelclk
+
+  resets:
+    maxItems: 1
+    description: Vout Top core
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Vout domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    voutcrg: clock-controller@295C0000 {
+        compatible = "starfive,jh7110-voutcrg";
+        reg = <0x295C0000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>,
+                 <&syscrg JH7110_SYSCLK_I2STX0_BCLK>,
+                 <&hdmitx0_pixelclk>;
+        clock-names = "vout_src", "vout_top_ahb",
+                      "vout_top_axi", "vout_top_hdmitx0_mclk",
+                      "i2stx0_bclk", "hdmitx0_pixelclk";
+        resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_VOUT>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
deleted file mode 100644
index dbaa886b223e..000000000000
--- a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Clock bindings for ST-Ericsson ABx500 clocks
-
-Required properties :
-- compatible : shall contain the following:
-  "stericsson,ab8500-clk"
-- #clock-cells should be <1>
-
-The ABx500 clocks need to be placed as a subnode of an AB8500
-device node, see mfd/ab8500.txt
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/ste-ab8500.h header and can be used in device
-tree sources.
-
-Example:
-
-clock-controller {
-	compatible = "stericsson,ab8500-clk";
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
index 9bc95a308477..2150307219a0 100644
--- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -109,6 +109,25 @@ properties:
 
     additionalProperties: false
 
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -119,3 +138,41 @@ required:
   - smp-twd-clock
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 000000000000..bcc14088220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 000000000000..b370a10a23a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various internal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
new file mode 100644
index 000000000000..9d058c00ab3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/thead,th1520-clk-ap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 AP sub-system clock controller
+
+description: |
+  The T-HEAD TH1520 AP sub-system clock controller configures the
+  CPU, DPU, GMAC and TEE PLLs. Additionally the VO subsystem configures
+  the clock gates for the HDMI, MIPI and the GPU.
+
+  SoC reference manual
+  https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+  - Wei Fu <wefu@redhat.com>
+  - Drew Fustini <dfustini@tenstorrent.com>
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-clk-ap
+      - thead,th1520-clk-vo
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: |
+          One input clock:
+          - For "thead,th1520-clk-ap": the clock input must be the 24 MHz
+            main oscillator.
+          - For "thead,th1520-clk-vo": the clock input must be the VIDEO_PLL,
+            which is configured by the AP clock controller. According to the
+            TH1520 manual, VIDEO_PLL is a Silicon Creations Sigma-Delta PLL
+            (integer PLL) typically running at 792 MHz (FOUTPOSTDIV), with
+            a maximum FOUTVCO of 2376 MHz.
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/thead,th1520-clk-ap.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/thead,th1520-clk-ap.h>
+    clock-controller@ef010000 {
+        compatible = "thead,th1520-clk-ap";
+        reg = <0xef010000 0x1000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
new file mode 100644
index 000000000000..b2e40bd39a3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Audio Reference Clock
+
+maintainers:
+  - Jai Luthra <j-luthra@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am62-audio-refclk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_refclk0: clock@82e0 {
+        compatible = "ti,am62-audio-refclk";
+        reg = <0x82e0 0x4>;
+        clocks = <&k3_clks 157 0>;
+        assigned-clocks = <&k3_clks 157 0>;
+        assigned-clock-parents = <&k3_clks 157 8>;
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 9b537bc876b5..64b8bce5962c 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -15,7 +15,7 @@ properties:
       - enum:
           - ti,am654-ehrpwm-tbclk
           - ti,am64-epwm-tbclk
-      - const: syscon
+          - ti,am62-epwm-tbclk
 
   "#clock-cells":
     const: 1
@@ -32,8 +32,8 @@ additionalProperties: false
 
 examples:
   - |
-    ehrpwm_tbclk: syscon@4140 {
-        compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+    ehrpwm_tbclk: clock@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk";
         reg = <0x4140 0x18>;
         #clock-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
deleted file mode 100644
index df42ab72718f..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
-
-Reference
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] https://www.ti.com/product/cdce913
-[3] https://www.ti.com/product/cdce925
-[4] https://www.ti.com/product/cdce937
-[5] https://www.ti.com/product/cdce949
-
-The driver provides clock sources for each output Y1 through Y5.
-
-Required properties:
- - compatible: Shall be one of the following:
-	- "ti,cdce913": 1-PLL, 3 Outputs
-	- "ti,cdce925": 2-PLL, 5 Outputs
-	- "ti,cdce937": 3-PLL, 7 Outputs
-	- "ti,cdce949": 4-PLL, 9 Outputs
- - reg: I2C device address.
- - clocks: Points to a fixed parent clock that provides the input frequency.
- - #clock-cells: From common clock bindings: Shall be 1.
-
-Optional properties:
- - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
-                 board, or to compensate for external influences.
-- vdd-supply: A regulator node for Vdd
-- vddout-supply: A regulator node for Vddout
-
-For all PLL1, PLL2, ... an optional child node can be used to specify spread
-spectrum clocking parameters for a board.
-  - spread-spectrum: SSC mode as defined in the data sheet.
-  - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
-    present, the clock runs at the requested frequency on average. Otherwise
-    the requested frequency is the maximum value of the SCC range.
-
-
-Example:
-
-	clockgen: cdce925pw@64 {
-		compatible = "cdce925";
-		reg = <0x64>;
-		clocks = <&xtal_27Mhz>;
-		#clock-cells = <1>;
-		xtal-load-pf = <5>;
-		vdd-supply = <&1v8-reg>;
-		vddout-supply = <&3v3-reg>;
-		/* PLL options to get SSC 1% centered */
-		PLL2 {
-			spread-spectrum = <4>;
-			spread-spectrum-center;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
new file mode 100644
index 000000000000..95c1c6f8b755
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    additionalProperties: false
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,clkctrl.yaml b/Documentation/devicetree/bindings/clock/ti,clkctrl.yaml
new file mode 100644
index 000000000000..49787550ce45
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,clkctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,clkctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments clkctrl clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description: |
+  Texas Instruments SoCs can have a clkctrl clock controller for each
+  interconnect target module. The clkctrl clock controller manages functional
+  and interface clocks for each module. Each clkctrl controller can also
+  gate one or more optional functional clocks for a module, and can have one
+  or more clock muxes. There is a clkctrl clock controller typically for each
+  interconnect target module on omap4 and later variants.
+
+  The clock consumers can specify the index of the clkctrl clock using
+  the hardware offset from the clkctrl instance register space. The optional
+  clocks can be specified by clkctrl hardware offset and the index of the
+  optional clock.
+
+properties:
+  compatible:
+    enum:
+      - ti,clkctrl
+      - ti,clkctrl-l4-cfg
+      - ti,clkctrl-l4-per
+      - ti,clkctrl-l4-secure
+      - ti,clkctrl-l4-wkup
+
+  "#clock-cells":
+    const: 2
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 8 # arbitrary, should be enough
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clock-output-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      clock@20 {
+        compatible = "ti,clkctrl";
+        clock-output-names = "l4_per";
+        reg = <0x20 0x1b0>;
+        #clock-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
index bd8173848253..13d7b3d03d84 100644
--- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for the Texas Instruments LMK04832
+title: Texas Instruments LMK04832 Clock Controller
 
 maintainers:
   - Liam Beguin <liambeguin@gmail.com>
@@ -160,7 +160,7 @@ examples:
         };
     };
 
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
index 0e370289a053..66e8e66ca175 100644
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -1,10 +1,10 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI clock controller node bindings
+title: TI-SCI clock controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
@@ -36,7 +36,7 @@ properties:
 
       The second cell should contain the clock ID.
 
-      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
deleted file mode 100644
index 18af6b9409e3..000000000000
--- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Texas Instruments clkctrl clock binding
-
-Texas Instruments SoCs can have a clkctrl clock controller for each
-interconnect target module. The clkctrl clock controller manages functional
-and interface clocks for each module. Each clkctrl controller can also
-gate one or more optional functional clocks for a module, and can have one
-or more clock muxes. There is a clkctrl clock controller typically for each
-interconnect target module on omap4 and later variants.
-
-The clock consumers can specify the index of the clkctrl clock using
-the hardware offset from the clkctrl instance register space. The optional
-clocks can be specified by clkctrl hardware offset and the index of the
-optional clock.
-
-For more information, please see the Linux clock framework binding at
-Documentation/devicetree/bindings/clock/clock-bindings.txt.
-
-Required properties :
-- compatible : shall be "ti,clkctrl" or a clock domain specific name:
-	       "ti,clkctrl-l4-cfg"
-	       "ti,clkctrl-l4-per"
-	       "ti,clkctrl-l4-secure"
-	       "ti,clkctrl-l4-wkup"
-- #clock-cells : shall contain 2 with the first entry being the instance
-		 offset from the clock domain base and the second being the
-		 clock index
-- reg : clock registers
-
-Example: Clock controller node on omap 4430:
-
-&cm2 {
-	l4per: cm@1400 {
-		cm_l4per@0 {
-			cm_l4per_clkctrl: clock@20 {
-				compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
-				reg = <0x20 0x1b0>;
-				#clock-cells = <2>;
-			};
-		};
-	};
-};
-
-Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
-
-#define OMAP4_CLKCTRL_OFFSET		0x20
-#define OMAP4_CLKCTRL_INDEX(offset)	((offset) - OMAP4_CLKCTRL_OFFSET)
-#define MODULEMODE_HWCTRL		1
-#define MODULEMODE_SWCTRL		2
-
-#define OMAP4_GPTIMER10_CLKTRL		OMAP4_CLKCTRL_INDEX(0x28)
-#define OMAP4_GPTIMER11_CLKTRL		OMAP4_CLKCTRL_INDEX(0x30)
-#define OMAP4_GPTIMER2_CLKTRL		OMAP4_CLKCTRL_INDEX(0x38)
-...
-#define OMAP4_GPIO2_CLKCTRL		OMAP_CLKCTRL_INDEX(0x60)
-
-Example: Clock consumer node for GPIO2:
-
-&gpio2 {
-       clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
-		 &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
deleted file mode 100644
index c35cb6c4af4d..000000000000
--- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments keystone pll controller
-
-The main pll controller used to drive theC66x CorePacs, the switch fabric,
-and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
-the NETCP modules) requires a PLL Controller to manage the various clock
-divisions, gating, and synchronization.
-
-Required properties:
-
-- compatible:		"ti,keystone-pllctrl", "syscon"
-
-- reg:			contains offset/length value for pll controller
-			registers space.
-
-Example:
-
-pllctrl: pll-controller@02310000 {
-	compatible = "ti,keystone-pllctrl", "syscon";
-	reg = <0x02310000 0x200>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt
index 4c8a2ce2cd70..3122360adcf3 100644
--- a/Documentation/devicetree/bindings/clock/ti/adpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments ADPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped ADPLL with two to three selectable input clocks
 and three to four children.
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
index ade4dd4c30f0..bbd505c1199d 100644
--- a/Documentation/devicetree/bindings/clock/ti/apll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments APLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped APLL with usually two selectable input clocks
 (reference clock and bypass clock), with analog phase locked
diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
deleted file mode 100644
index 7c735dde9fe9..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Binding for Texas Instruments autoidle clock.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1]. It assumes a register mapped
-clock which can be put to idle automatically by hardware based on the usage
-and a configuration bit setting. Autoidle clock is never an individual
-clock, it is always a derivative of some basic clock like a gate, divider,
-or fixed-factor.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- reg : offset for the register controlling the autoidle
-- ti,autoidle-shift : bit shift of the autoidle enable bit
-- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
-
-Examples:
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index cb76b3f2b341..edf0b5d42768 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments clockdomain.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1] in consumer role.
 Every clock on TI SoC belongs to one clockdomain, but software
 only needs this information for specific clocks which require
@@ -17,6 +15,9 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of clocks within this domain
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
deleted file mode 100644
index 5f43c4706b09..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Binding for TI composite clock.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1]. It assumes a
-register-mapped composite clock with multiple different sub-types;
-
-a multiplexer clock with multiple input clock signals or parents, one
-of which can be selected as output, this behaves exactly as [2]
-
-an adjustable clock rate divider, this behaves exactly as [3]
-
-a gating function which can be used to enable and disable the output
-clock, this behaves exactly as [4]
-
-The binding must provide a list of the component clocks that shall be
-merged to this clock. The component clocks shall be of one of the
-"ti,*composite*-clock" types.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/mux.txt
-[3] Documentation/devicetree/bindings/clock/ti/divider.txt
-[4] Documentation/devicetree/bindings/clock/ti/gate.txt
-
-Required properties:
-- compatible : shall be: "ti,composite-clock"
-- clocks : link phandles of component clocks
-- #clock-cells : from common clock binding; shall be set to 0.
-
-Examples:
-
-usb_l4_gate_ick: usb_l4_gate_ick {
-	#clock-cells = <0>;
-	compatible = "ti,composite-interface-clock";
-	clocks = <&l4_ick>;
-	ti,bit-shift = <5>;
-	reg = <0x0a10>;
-};
-
-usb_l4_div_ick: usb_l4_div_ick {
-	#clock-cells = <0>;
-	compatible = "ti,composite-divider-clock";
-	clocks = <&l4_ick>;
-	ti,bit-shift = <4>;
-	ti,max-div = <1>;
-	reg = <0x0a40>;
-	ti,index-starts-at-one;
-};
-
-usb_l4_ick: usb_l4_ick {
-	#clock-cells = <0>;
-	compatible = "ti,composite-clock";
-	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
index 36998e184821..c9894538315b 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -15,7 +15,7 @@ Required properties:
 	- for "ti,da850-pll1", shall be "clksrc"
 
 Optional properties:
-- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
 	wave input on the OSCIN pin instead of using a crystal oscillator.
 	This property is only valid when compatible = "ti,da850-pll0".
 
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
deleted file mode 100644
index 9b13b32974f9..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/divider.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-Binding for TI divider clock
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1].  It assumes a
-register-mapped adjustable clock rate divider that does not gate and has
-only one input clock or parent.  By default the value programmed into
-the register is one less than the actual divisor value.  E.g:
-
-register value		actual divisor value
-0			1
-1			2
-2			3
-
-This assumption may be modified by the following optional properties:
-
-ti,index-starts-at-one - valid divisor values start at 1, not the default
-of 0.  E.g:
-register value		actual divisor value
-1			1
-2			2
-3			3
-
-ti,index-power-of-two - valid divisor values are powers of two.  E.g:
-register value		actual divisor value
-0			1
-1			2
-2			4
-
-Additionally an array of valid dividers may be supplied like so:
-
-	ti,dividers = <4>, <8>, <0>, <16>;
-
-Which will map the resulting values to a divisor table by their index:
-register value		actual divisor value
-0			4
-1			8
-2			<invalid divisor, skipped>
-3			16
-
-Any zero value in this array means the corresponding bit-value is invalid
-and must not be used.
-
-The binding must also provide the register to control the divider and
-unless the divider array is provided, min and max dividers. Optionally
-the number of bits to shift that mask, if necessary. If the shift value
-is missing it is the same as supplying a zero shift.
-
-This binding can also optionally provide support to the hardware autoidle
-feature, see [2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
-
-Required properties:
-- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : link to phandle of parent clock
-- reg : offset for register controlling adjustable divider
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,dividers : array of integers defining divisors
-- ti,bit-shift : number of bits to shift the divider value, defaults to 0
-- ti,min-div : min divisor for dividing the input clock rate, only
-  needed if the first divisor is offset from the default value (1)
-- ti,max-div : max divisor for dividing the input clock rate, only needed
-  if ti,dividers is not defined.
-- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
-  only valid if ti,dividers is not defined.
-- ti,index-power-of-two : valid divisor programming must be a power of two,
-  only valid if ti,dividers is not defined.
-- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
-  see [2]
-- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
-  see [2]
-- ti,set-rate-parent : clk_set_rate is propagated to parent
-- ti,latch-bit : latch the divider value to HW, only needed if the register
-  access requires this. As an example dra76x DPLL_GMAC H14 divider implements
-  such behavior.
-
-Examples:
-dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
-	#clock-cells = <0>;
-	compatible = "ti,divider-clock";
-	clocks = <&dpll_usb_ck>;
-	ti,max-div = <127>;
-	reg = <0x190>;
-	ti,index-starts-at-one;
-};
-
-aess_fclk: aess_fclk@4a004528 {
-	#clock-cells = <0>;
-	compatible = "ti,divider-clock";
-	clocks = <&abe_clk>;
-	ti,bit-shift = <24>;
-	reg = <0x528>;
-	ti,max-div = <2>;
-};
-
-dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
-	#clock-cells = <0>;
-	compatible = "ti,composite-divider-clock";
-	clocks = <&dpll_core_x2_ck>;
-	ti,max-div = <31>;
-	reg = <0x0134>;
-	ti,index-starts-at-one;
-};
-
-ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
-	#clock-cells = <0>;
-	compatible = "ti,composite-divider-clock";
-	clocks = <&corex2_fck>;
-	ti,bit-shift = <8>;
-	reg = <0x0a40>;
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index 37a7cb6ad07d..14a1b72c2e71 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments DPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped DPLL with usually two selectable input clocks
 (reference clock and bypass clock), with digital phase locked
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 21c002d28b9b..68504079f99f 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -6,7 +6,7 @@ functional clock but can be configured to provide different clocks.
 ATL can maintain a clock averages to some desired frequency based on the bws/aws
 signals - can compensate the drift between the two ws signal.
 
-In order to provide the support for ATL and it's output clocks (which can be used
+In order to provide the support for ATL and its output clocks (which can be used
 internally within the SoC or external components) two sets of bindings is needed:
 
 Clock tree binding:
diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt
index c19b3f253b8c..88986ef39ddd 100644
--- a/Documentation/devicetree/bindings/clock/ti/fapll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments FAPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped FAPLL with usually two selectable input clocks
 (reference clock and bypass clock), and one or more child
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
deleted file mode 100644
index 662b36d53bf0..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Binding for TI fixed factor rate clock sources.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1], and also uses the autoidle
-support from TI autoidle clock [2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
-
-Required properties:
-- compatible : shall be "ti,fixed-factor-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- ti,clock-div: fixed divider.
-- ti,clock-mult: fixed multiplier.
-- clocks: parent clock.
-
-Optional properties:
-- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
-  see [2]
-- reg: offset for the autoidle register of this clock, see [2]
-- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
-- ti,set-rate-parent: clk_set_rate is propagated to parent
-
-Example:
-	clock {
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		ti,clock-div = <2>;
-		ti,clock-mult = <1>;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
deleted file mode 100644
index 56d603c1f716..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-Binding for Texas Instruments gate clock.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1]. This clock is
-quite much similar to the basic gate-clock [2], however,
-it supports a number of additional features. If no register
-is provided for this clock, the code assumes that a clockdomain
-will be controlled instead and the corresponding hw-ops for
-that is used.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
-[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
-
-Required properties:
-- compatible : shall be one of:
-  "ti,gate-clock" - basic gate clock
-  "ti,wait-gate-clock" - gate clock which waits until clock is active before
-			 returning from clk_enable()
-  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
-  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
-  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
-			  clock directly from a clockdomain, see [3] how
-			  to map clockdomains properly
-  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
-			  required for a hardware errata
-  "ti,composite-gate-clock" - composite gate clock, to be part of composite
-			      clock
-  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
-				      for clock to be active before returning
-				      from clk_enable()
-- #clock-cells : from common clock binding; shall be set to 0
-- clocks : link to phandle of parent clock
-- reg : offset for register controlling adjustable gate, not needed for
-	ti,clkdm-gate-clock type
-
-Optional properties:
-- ti,bit-shift : bit shift for programming the clock gate, invalid for
-		 ti,clkdm-gate-clock type
-- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
-  gates the clock and clearing the bit ungates the clock.
-
-Examples:
-	mmchs2_fck: mmchs2_fck@48004a00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-
-	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <0>;
-	};
-
-	emac_ick: emac_ick@4800259c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <1>;
-	};
-
-	emu_src_ck: emu_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&emu_src_mux_ck>;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	vlynq_gate_fck: vlynq_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0200>;
-	};
-
-	sys_clkout2_src_gate: sys_clkout2_src_gate {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0070>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
deleted file mode 100644
index 3f4704040140..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Binding for Texas Instruments interface clock.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1]. This clock is
-quite much similar to the basic gate-clock [2], however,
-it supports a number of additional features, including
-companion clock finding (match corresponding functional gate
-clock) and hardware autoidle enable / disable.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
-
-Required properties:
-- compatible : shall be one of:
-  "ti,omap3-interface-clock" - basic OMAP3 interface clock
-  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
-				       capability for waiting clock to be ready
-  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
-					handling
-  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
-  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
-  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
-  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
-				  handling
-- #clock-cells : from common clock binding; shall be set to 0
-- clocks : link to phandle of parent clock
-- reg : base address for the control register
-
-Optional properties:
-- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
-
-Examples:
-	aes1_ick: aes1_ick@48004a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x48004a14 0x4>;
-		ti,bit-shift = <3>;
-	};
-
-	cam_ick: cam_ick@48004f10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x48004f10 0x4>;
-		ti,bit-shift = <0>;
-	};
-
-	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x48004a10 0x4>;
-		ti,bit-shift = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
deleted file mode 100644
index eec8994b9be8..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Binding for TI mux clock.
-
-Binding status: Unstable - ABI compatibility may be broken in the future
-
-This binding uses the common clock binding[1].  It assumes a
-register-mapped multiplexer with multiple input clock signals or
-parents, one of which can be selected as output.  This clock does not
-gate or adjust the parent rate via a divider or multiplier.
-
-By default the "clocks" property lists the parents in the same order
-as they are programmed into the regster.  E.g:
-
-	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
-
-results in programming the register as follows:
-
-register value		selected parent clock
-0			foo_clock
-1			bar_clock
-2			baz_clock
-
-Some clock controller IPs do not allow a value of zero to be programmed
-into the register, instead indexing begins at 1.  The optional property
-"index-starts-at-one" modified the scheme as follows:
-
-register value		selected clock parent
-1			foo_clock
-2			bar_clock
-3			baz_clock
-
-The binding must provide the register to control the mux. Optionally
-the number of bits to shift the control field in the register can be
-supplied. If the shift value is missing it is the same as supplying
-a zero shift.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : link phandles of parent clocks
-- reg : register offset for register controlling adjustable mux
-
-Optional properties:
-- ti,bit-shift : number of bits to shift the bit-mask, defaults to
-  0 if not present
-- ti,index-starts-at-one : valid input select programming starts at 1, not
-  zero
-- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
-  not supported by the composite-mux-clock subtype
-- ti,latch-bit : latch the mux value to HW, only needed if the register
-  access requires this. As an example, dra7x DPLL_GMAC H14 muxing
-  implements such behavior.
-
-Examples:
-
-sys_clkin_ck: sys_clkin_ck@4a306110 {
-	#clock-cells = <0>;
-	compatible = "ti,mux-clock";
-	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-	reg = <0x0110>;
-	ti,index-starts-at-one;
-};
-
-abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
-	#clock-cells = <0>;
-	compatible = "ti,mux-clock";
-	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-	ti,bit-shift = <24>;
-	reg = <0x0108>;
-};
-
-mcbsp5_mux_fck: mcbsp5_mux_fck {
-	#clock-cells = <0>;
-	compatible = "ti,composite-mux-clock";
-	clocks = <&core_96m_fck>, <&mcbsp_clks>;
-	ti,bit-shift = <4>;
-	reg = <0x02d8>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
new file mode 100644
index 000000000000..ed1bf182b64d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,autoidle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI autoidle clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+  - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+  Some clocks in TI SoC support the autoidle feature. These properties are
+  applicable only if the clock supports autoidle feature. It assumes a register
+  mapped clock which can be put to idle automatically by hardware based on
+  usage and configuration bit setting. Autoidle clock is never an individual
+  clock, it is always a derivative of some basic clock like a gate, divider, or
+  fixed-factor.
+
+properties:
+  ti,autoidle-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      bit shift of the autoidle enable bit for the clock
+    maximum: 31
+    default: 0
+
+  ti,invert-autoidle-bit:
+    type: boolean
+    description:
+      autoidle is enabled by setting the bit to 0
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 000000000000..d525f96cf244
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml
new file mode 100644
index 000000000000..31a6794852c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,composite-clock.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,composite-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments composite clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  *Deprecated design pattern: one node per clock*
+
+  This binding assumes a register-mapped composite clock with multiple
+  different sub-types:
+
+    a multiplexer clock with multiple input clock signals or parents, one
+    of which can be selected as output, this behaves exactly as [1].
+
+    an adjustable clock rate divider, this behaves exactly as [2].
+
+    a gating function which can be used to enable and disable the output
+    clock, this behaves exactly as [3].
+
+  The binding must provide a list of the component clocks that shall be
+  merged to this clock. The component clocks shall be of one of the
+  "ti,*composite*-clock" types.
+
+  [1] Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
+  [2] Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
+  [3] Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml
+
+properties:
+  compatible:
+    const: ti,composite-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks: true
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb_l4_gate_ick: clock-controller@a10 {
+        #clock-cells = <0>;
+        compatible = "ti,composite-gate-clock";
+        clocks = <&l4_ick>;
+        ti,bit-shift = <5>;
+        reg = <0x0a10>;
+      };
+
+      usb_l4_div_ick: clock-controller@a40 {
+        #clock-cells = <0>;
+        compatible = "ti,composite-divider-clock";
+        clocks = <&l4_ick>;
+        ti,bit-shift = <4>;
+        ti,max-div = <1>;
+        reg = <0x0a40>;
+        ti,index-starts-at-one;
+      };
+    };
+
+    clock-controller {
+      #clock-cells = <0>;
+      compatible = "ti,composite-clock";
+      clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
new file mode 100644
index 000000000000..6729fcb839d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,divider-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments divider clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  This clock It assumes a register-mapped adjustable clock rate divider
+  that does not gate and has only one input clock or parent.  By default the
+  value programmed into the register is one less than the actual divisor value.
+  E.g:
+
+  register value    actual divisor value
+  0                 1
+  1                 2
+  2                 3
+
+  This assumption may be modified by the following optional properties:
+
+  ti,index-starts-at-one - valid divisor values start at 1, not the default
+  of 0.  E.g:
+  register value    actual divisor value
+  1                 1
+  2                 2
+  3                 3
+
+  ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+  register value    actual divisor value
+  0                 1
+  1                 2
+  2                 4
+
+  Additionally an array of valid dividers may be supplied like so:
+
+  ti,dividers = <4>, <8>, <0>, <16>;
+
+  Which will map the resulting values to a divisor table by their index:
+  register value    actual divisor value
+  0                 4
+  1                 8
+  2                 <invalid divisor, skipped>
+  3                 16
+
+  Any zero value in this array means the corresponding bit-value is invalid
+  and must not be used.
+
+  The binding must also provide the register to control the divider and
+  unless the divider array is provided, min and max dividers. Optionally
+  the number of bits to shift that mask, if necessary. If the shift value
+  is missing it is the same as supplying a zero shift.
+
+  This binding can also optionally provide support to the hardware autoidle
+  feature.
+
+allOf:
+  - $ref: ti,autoidle.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,divider-clock
+      - ti,composite-divider-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ti,dividers:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      array of integers defining divisors
+
+  ti,bit-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number of bits to shift the divider value
+    maximum: 31
+    default: 0
+
+  ti,min-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      min divisor for dividing the input clock rate, only
+      needed if the first divisor is offset from the default value (1)
+    minimum: 1
+    default: 1
+
+  ti,max-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      max divisor for dividing the input clock rate, only needed
+      if ti,dividers is not defined.
+
+  ti,index-starts-at-one:
+    type: boolean
+    description:
+      valid divisor programming starts at 1, not zero,
+      only valid if ti,dividers is not defined
+
+  ti,index-power-of-two:
+    type: boolean
+    description:
+      valid divisor programming must be a power of two,
+      only valid if ti,dividers is not defined.
+
+  ti,set-rate-parent:
+    type: boolean
+    description:
+      clk_set_rate is propagated to parent            |
+
+  ti,latch-bit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      latch the divider value to HW, only needed if the register
+      compatible access requires this. As an example dra76x DPLL_GMAC
+      H14 divider implements such behavior.
+
+dependentSchemas:
+  ti,dividers:
+    properties:
+      ti,min-div: false
+      ti,max-div: false
+      ti,index-power-of-two: false
+      ti,index-starts-at-one: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@190 {
+        #clock-cells = <0>;
+        compatible = "ti,divider-clock";
+        clocks = <&dpll_usb_ck>;
+        ti,max-div = <127>;
+        reg = <0x190>;
+        ti,index-starts-at-one;
+      };
+
+      clock-controller@528 {
+        #clock-cells = <0>;
+        compatible = "ti,divider-clock";
+        clocks = <&abe_clk>;
+        ti,bit-shift = <24>;
+        reg = <0x528>;
+        ti,max-div = <2>;
+      };
+
+      clock-controller@a40 {
+        #clock-cells = <0>;
+        compatible = "ti,composite-divider-clock";
+        clocks = <&corex2_fck>;
+        ti,bit-shift = <8>;
+        reg = <0x0a40>;
+        ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
new file mode 100644
index 000000000000..7a63b0992976
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI fixed factor rate clock sources
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+  - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+  This consists of a divider and a multiplier used to generate a fixed rate
+  clock. This also uses the autoidle support from TI autoidle clock.
+
+allOf:
+  - $ref: ti,autoidle.yaml#
+
+properties:
+  compatible:
+    const: ti,fixed-factor-clock
+
+  "#clock-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ti,clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed divider
+    minimum: 1
+
+  ti,clock-mult:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed multiplier
+    minimum: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  ti,set-rate-parent:
+    description:
+      Propagate to parent clock
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - "#clock-cells"
+  - ti,clock-mult
+  - ti,clock-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock@1b4 {
+            compatible = "ti,fixed-factor-clock";
+            reg = <0x1b4>;
+            clocks = <&dpll_usb_ck>;
+            #clock-cells = <0>;
+            ti,clock-mult = <1>;
+            ti,clock-div = <1>;
+            ti,autoidle-shift = <8>;
+            ti,invert-autoidle-bit;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml
new file mode 100644
index 000000000000..eaa727ab0d7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,gate-clock.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments gate clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  *Deprecated design pattern: one node per clock*
+
+  This clock is quite much similar to the basic gate-clock [1], however,
+  it supports a number of additional features. If no register
+  is provided for this clock, the code assumes that a clockdomain
+  will be controlled instead and the corresponding hw-ops for
+  that is used.
+
+  [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+  [2] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+properties:
+  compatible:
+    enum:
+      - ti,gate-clock           # basic gate clock
+      - ti,wait-gate-clock      # gate clock which waits until clock is
+                                # active before returning from clk_enable()
+      - ti,dss-gate-clock       # gate clock with DSS specific hardware
+                                # handling
+      - ti,am35xx-gate-clock    # gate clock with AM35xx specific hardware
+                                # handling
+      - ti,clkdm-gate-clock     # clockdomain gate clock, which derives its
+                                # functional clock directly from a
+                                # clockdomain, see [2] how to map
+                                # clockdomains properly
+      - ti,hsdiv-gate-clock     # gate clock with OMAP36xx specific hardware
+                                # handling, required for a hardware errata
+      - ti,composite-gate-clock # composite gate clock, to be part of
+                                # composite clock
+      - ti,composite-no-wait-gate-clock # composite gate clock that does not
+                                        # wait for clock to be active before
+                                        # returning from clk_enable()
+  "#clock-cells":
+    const: 0
+
+  clocks: true
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ti,bit-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of bits to shift the bit-mask
+    maximum: 31
+    default: 0
+
+  ti,set-bit-to-disable:
+    type: boolean
+    description:
+      Inverts default gate programming. Setting the bit
+      gates the clock and clearing the bit ungates the clock.
+
+  ti,set-rate-parent:
+    type: boolean
+    description:
+      clk_set_rate is propagated to parent clock,
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: ti,clkdm-gate-clock
+then:
+  properties:
+    reg: false
+  required:
+    - compatible
+    - "#clock-cells"
+    - clocks
+else:
+  required:
+    - compatible
+    - "#clock-cells"
+    - clocks
+    - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@a00 {
+        #clock-cells = <0>;
+        compatible = "ti,gate-clock";
+        clocks = <&core_96m_fck>;
+        reg = <0x0a00>;
+        ti,bit-shift = <25>;
+      };
+
+      clock-controller@d00 {
+        compatible = "ti,hsdiv-gate-clock";
+        reg = <0x0d00>;
+        #clock-cells = <0>;
+        clocks = <&dpll4_m2x2_mul_ck>;
+        ti,bit-shift = <0x1b>;
+        ti,set-bit-to-disable;
+      };
+    };
+
+  - |
+    clock-controller {
+      #clock-cells = <0>;
+      compatible = "ti,clkdm-gate-clock";
+      clocks = <&emu_src_mux_ck>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
new file mode 100644
index 000000000000..1eaf95d88e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,interface-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interface clock.
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  This clock is quite much similar to the basic gate-clock[1], however,
+  it supports a number of additional features, including
+  companion clock finding (match corresponding functional gate
+  clock) and hardware autoidle enable / disable.
+
+  [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+
+properties:
+  compatible:
+    enum:
+      - ti,omap3-interface-clock           # basic OMAP3 interface clock
+      - ti,omap3-no-wait-interface-clock   # interface clock which has no hardware
+                                           # capability for waiting clock to be ready
+      - ti,omap3-hsotgusb-interface-clock  # interface clock with USB specific HW handling
+      - ti,omap3-dss-interface-clock       # interface clock with DSS specific HW handling
+      - ti,omap3-ssi-interface-clock       # interface clock with SSI specific HW handling
+      - ti,am35xx-interface-clock          # interface clock with AM35xx specific HW handling
+      - ti,omap2430-interface-clock        # interface clock with OMAP2430 specific HW handling
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ti,bit-shift:
+    description:
+      bit shift for the bit enabling/disabling the clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 31
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      aes1_ick: clock-controller@3 {
+        #clock-cells = <0>;
+        compatible = "ti,omap3-interface-clock";
+        clocks = <&security_l4_ick2>;
+        reg = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
new file mode 100644
index 000000000000..485b6aae85d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,mux-clock.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,mux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments mux clock
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  This clock assumes a register-mapped multiplexer with multiple inpt clock
+  signals or parents, one of which can be selected as output. This clock does
+  not gate or adjust the parent rate via a divider or multiplier.
+
+  By default the "clocks" property lists the parents in the same order
+  as they are programmed into the register.  E.g:
+
+    clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+  Results in programming the register as follows:
+
+  register value   selected parent clock
+  0                foo_clock
+  1                bar_clock
+  2                baz_clock
+
+  Some clock controller IPs do not allow a value of zero to be programmed
+  into the register, instead indexing begins at 1.  The optional property
+  "index-starts-at-one" modified the scheme as follows:
+
+  register value   selected clock parent
+  1                foo_clock
+  2                bar_clock
+  3                baz_clock
+
+  The binding must provide the register to control the mux. Optionally
+  the number of bits to shift the control field in the register can be
+  supplied. If the shift value is missing it is the same as supplying
+  a zero shift.
+
+properties:
+  compatible:
+    enum:
+      - ti,mux-clock
+      - ti,composite-mux-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks: true
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ti,bit-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of bits to shift the bit-mask
+    maximum: 31
+    default: 0
+
+  ti,index-starts-at-one:
+    type: boolean
+    description:
+      Valid input select programming starts at 1, not zero
+
+  ti,set-rate-parent:
+    type: boolean
+    description:
+      clk_set_rate is propagated to parent clock,
+      not supported by the composite-mux-clock subtype.
+
+  ti,latch-bit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Latch the mux value to HW, only needed if the register
+      access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+      implements such behavior.
+    maximum: 31
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: ti,composite-mux-clock
+then:
+  properties:
+    ti,set-rate-parent: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@110 {
+        compatible = "ti,mux-clock";
+        reg = <0x0110>;
+        #clock-cells = <0>;
+        clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>;
+        ti,index-starts-at-one;
+        ti,set-rate-parent;
+      };
+
+      clock-controller@120 {
+        compatible = "ti,composite-mux-clock";
+        reg = <0x0120>;
+        #clock-cells = <0>;
+        clocks = <&core_96m_fck>, <&mcbsp_clks>;
+        ti,bit-shift = <4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 000000000000..d36558aa39f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 000000000000..081f85b1eb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
deleted file mode 100644
index 63f9f1ac3439..000000000000
--- a/Documentation/devicetree/bindings/clock/vf610-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Freescale Vybrid VF610 SOC
-
-Required properties:
-- compatible: Should be "fsl,vf610-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-Optional properties:
-- clocks: list of clock identifiers which are external input clocks to the
-	given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-- clock-names: list of names of clocks which are exteral input clocks to the
-	given clock controller.
-
-Input clocks for top clock controller:
-	- sxosc (external crystal oscillator 32KHz, recommended)
-	- fxosc (external crystal oscillator 24MHz, recommended)
-	- audio_ext
-	- enet_ext
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
-for the full list of VF610 clock IDs.
-
-Examples:
-
-clks: ccm@4006b000 {
-	compatible = "fsl,vf610-ccm";
-	reg = <0x4006b000 0x1000>;
-	#clock-cells = <1>;
-	clocks = <&sxosc>, <&fxosc>;
-	clock-names = "sxosc", "fxosc";
-};
-
-uart1: serial@40028000 {
-	compatible = "fsl,vf610-uart";
-	reg = <0x40028000 0x1000>;
-	interrupts = <0 62 0x04>;
-	clocks = <&clks VF610_CLK_UART1>;
-	clock-names = "ipg";
-};
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
deleted file mode 100644
index 8233e771711b..000000000000
--- a/Documentation/devicetree/bindings/clock/xgene.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Device Tree Clock bindings for APM X-Gene
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
-	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
-	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
-	"apm,xgene-device-clock" - for a X-Gene device clock
-	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
-	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
-
-Required properties for SoC or PCP PLL clocks:
-- reg : shall be the physical PLL register address for the pll clock.
-- clocks : shall be the input parent clock phandle for the clock. This should
-	be the reference clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the PLL referenced by derive
-  clock.
-Optional properties for PLL clocks:
-- clock-names : shall be the name of the PLL. If missing, use the device name.
-
-Required properties for PMD clocks:
-- reg : shall be the physical register address for the pmd clock.
-- clocks : shall be the input parent clock phandle for the clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the clock referenced by derive
-  clock.
-Optional properties for PLL clocks:
-- clock-names : shall be the name of the clock. If missing, use the device name.
-
-Required properties for device clocks:
-- reg : shall be a list of address and length pairs describing the CSR
-         reset and/or the divider. Either may be omitted, but at least
-         one must be present.
- - reg-names : shall be a string list describing the reg resource. This
-               may include "csr-reg" and/or "div-reg". If this property
-               is not present, the reg property is assumed to describe
-               only "csr-reg".
-- clocks : shall be the input parent clock phandle for the clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the device referenced.
-Optional properties for device clocks:
-- clock-names : shall be the name of the device clock. If missing, use the
-                device name.
-- csr-offset : Offset to the CSR reset register from the reset address base.
-               Default is 0.
-- csr-mask : CSR reset mask bit. Default is 0xF.
-- enable-offset : Offset to the enable register from the reset address base.
-                  Default is 0x8.
-- enable-mask : CSR enable mask bit. Default is 0xF.
-- divider-offset : Offset to the divider CSR register from the divider base.
-                   Default is 0x0.
-- divider-width : Width of the divider register. Default is 0.
-- divider-shift : Bit shift of the divider register. Default is 0.
-
-For example:
-
-	pcppll: pcppll@17000100 {
-		compatible = "apm,xgene-pcppll-clock";
-		#clock-cells = <1>;
-		clocks = <&refclk 0>;
-		clock-names = "pcppll";
-		reg = <0x0 0x17000100 0x0 0x1000>;
-		clock-output-names = "pcppll";
-		type = <0>;
-	};
-
-	pmd0clk: pmd0clk@7e200200 {
-		compatible = "apm,xgene-pmd-clock";
-		#clock-cells = <1>;
-		clocks = <&pmdpll 0>;
-		reg = <0x0 0x7e200200 0x0 0x10>;
-		clock-output-names = "pmd0clk";
-	};
-
-	socpll: socpll@17000120 {
-		compatible = "apm,xgene-socpll-clock";
-		#clock-cells = <1>;
-		clocks = <&refclk 0>;
-		clock-names = "socpll";
-		reg = <0x0 0x17000120 0x0 0x1000>;
-		clock-output-names = "socpll";
-		type = <1>;
-	};
-
-	qmlclk: qmlclk {
-		compatible = "apm,xgene-device-clock";
-		#clock-cells = <1>;
-		clocks = <&socplldiv2 0>;
-		clock-names = "qmlclk";
-		reg = <0x0 0x1703C000 0x0 0x1000>;
-		reg-name = "csr-reg";
-		clock-output-names = "qmlclk";
-	};
-
-	ethclk: ethclk {
-		compatible = "apm,xgene-device-clock";
-		#clock-cells = <1>;
-		clocks = <&socplldiv2 0>;
-		clock-names = "ethclk";
-		reg = <0x0 0x17000000 0x0 0x1000>;
-		reg-names = "div-reg";
-		divider-offset = <0x238>;
-		divider-width = <0x9>;
-		divider-shift = <0x0>;
-		clock-output-names = "ethclk";
-	};
-
-	apbclk: apbclk {
-		compatible = "apm,xgene-device-clock";
-		#clock-cells = <1>;
-		clocks = <&ahbclk 0>;
-		clock-names = "apbclk";
-		reg = <0x0 0x1F2AC000 0x0 0x1000
-			0x0 0x1F2AC000 0x0 0x1000>;
-		reg-names = "csr-reg", "div-reg";
-		csr-offset = <0x0>;
-		csr-mask = <0x200>;
-		enable-offset = <0x8>;
-		enable-mask = <0x200>;
-		divider-offset = <0x10>;
-		divider-width = <0x2>;
-		divider-shift = <0x0>;
-		flags = <0x8>;
-		clock-output-names = "apbclk";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 000000000000..b497c28e8094
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+      - xlnx,versal-clk-wizard
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+  xlnx,static-config:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicate whether the core has been configured without support for dynamic
+      runtime reconfguration of the clocking primitive MMCM/PLL.
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,static-config;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml b/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml
new file mode 100644
index 000000000000..19dc923e2ee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,vcu.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,vcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: LogicoreIP designed compatible with Xilinx ZYNQ family.
+
+maintainers:
+  - Rohit Visavalia <rohit.visavalia@amd.com>
+
+description:
+  LogicoreIP design to provide the isolation between processing system
+  and programmable logic. Also provides the list of register set to configure
+  the frequency.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,vcu
+          - xlnx,vcu-logicoreip-1.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: pll ref clocksource
+      - description: aclk
+
+  clock-names:
+    items:
+      - const: pll_ref
+      - const: aclk
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        xlnx_vcu: vcu@a0040000 {
+            compatible = "xlnx,vcu-logicoreip-1.0";
+            reg = <0x0 0xa0040000 0x0 0x1000>;
+            reset-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>;
+            clocks = <&si570_1>, <&clkc 71>;
+            clock-names = "pll_ref", "aclk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d30..bef109d163a8 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -7,20 +7,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Versal clock controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
-  - Jolly Shah <jolly.shah@xilinx.com>
-  - Rajan Vaja <rajan.vaja@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The clock controller is a hardware block of Xilinx versal clock tree. It
   reads required input clock frequencies from the devicetree and acts as clock
   provider for all clock consumers of PS clocks.
 
-select: false
-
 properties:
   compatible:
-    const: xlnx,versal-clk
+    oneOf:
+      - enum:
+          - xlnx,versal-clk
+          - xlnx,zynqmp-clk
+      - items:
+          - enum:
+              - xlnx,versal-net-clk
+          - const: xlnx,versal-clk
 
   "#clock-cells":
     const: 1
@@ -28,16 +31,12 @@ properties:
   clocks:
     description: List of clock specifiers which are external input
       clocks to the given clock controller.
-    items:
-      - description: reference clock
-      - description: alternate reference clock
-      - description: alternate reference clock for programmable logic
+    minItems: 2
+    maxItems: 8
 
   clock-names:
-    items:
-      - const: ref
-      - const: alt_ref
-      - const: pl_alt_ref
+    minItems: 2
+    maxItems: 8
 
 required:
   - compatible
@@ -47,6 +46,80 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock for programmable logic
+
+        clock-names:
+          items:
+            - const: ref
+            - const: pl_alt_ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-net-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock for programmable logic
+            - description: alternate reference clock
+
+        clock-names:
+          items:
+            - const: ref
+            - const: pl_alt_ref
+            - const: alt_ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-clk
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          items:
+            - description: PS reference clock
+            - description: reference clock for video system
+            - description: alternative PS reference clock
+            - description: auxiliary reference clock
+            - description: transceiver reference clock
+            - description: (E)MIO clock source  (Optional clock)
+            - description: GEM emio clock  (Optional clock)
+            - description: Watchdog external clock (Optional clock)
+
+        clock-names:
+          minItems: 5
+          items:
+            - const: pss_ref_clk
+            - const: video_clk
+            - const: pss_alt_ref_clk
+            - const: aux_ref_clk
+            - const: gt_crx_ref_clk
+            - pattern: "^mio_clk[00-77]+.*$"
+            - pattern: "gem[0-3]+_emio_clk.*$"
+            - pattern: "swdt[0-1]+_ext_clk.*$"
+
 examples:
   - |
     firmware {
@@ -56,9 +129,18 @@ examples:
         versal_clk: clock-controller {
           #clock-cells = <1>;
           compatible = "xlnx,versal-clk";
-          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-          clock-names = "ref", "alt_ref", "pl_alt_ref";
+          clocks = <&ref>,  <&pl_alt_ref>;
+          clock-names = "ref", "pl_alt_ref";
         };
       };
     };
+
+    clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,zynqmp-clk";
+        clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+                 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+        clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+                      "aux_ref_clk", "gt_crx_ref_clk";
+    };
 ...
diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
deleted file mode 100644
index 391ee1a60bed..000000000000
--- a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
+++ /dev/null
@@ -1,63 +0,0 @@
---------------------------------------------------------------------------
-Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
-Zynq MPSoC firmware interface
---------------------------------------------------------------------------
-The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
-tree. It reads required input clock frequencies from the devicetree and acts
-as clock provider for all clock consumers of PS clocks.
-
-See clock_bindings.txt for more information on the generic clock bindings.
-
-Required properties:
- - #clock-cells:	Must be 1
- - compatible:		Must contain:	"xlnx,zynqmp-clk"
- - clocks:		List of clock specifiers which are external input
-			clocks to the given clock controller. Please refer
-			the next section to find the input clocks for a
-			given controller.
- - clock-names:		List of clock names which are exteral input clocks
-			to the given clock controller. Please refer to the
-			clock bindings for more details.
-
-Input clocks for zynqmp Ultrascale+ clock controller:
-
-The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
-inputs. These required clock inputs are:
- - pss_ref_clk (PS reference clock)
- - video_clk (reference clock for video system )
- - pss_alt_ref_clk (alternative PS reference clock)
- - aux_ref_clk
- - gt_crx_ref_clk (transceiver reference clock)
-
-The following strings are optional parameters to the 'clock-names' property in
-order to provide an optional (E)MIO clock source:
- - swdt0_ext_clk
- - swdt1_ext_clk
- - gem0_emio_clk
- - gem1_emio_clk
- - gem2_emio_clk
- - gem3_emio_clk
- - mio_clk_XX		# with XX = 00..77
- - mio_clk_50_or_51	#for the mux clock to gem tsu from 50 or 51
-
-
-Output clocks are registered based on clock information received
-from firmware. Output clocks indexes are mentioned in
-include/dt-bindings/clock/xlnx-zynqmp-clk.h.
-
--------
-Example
--------
-
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-		zynqmp_clk: clock-controller {
-			#clock-cells = <1>;
-			compatible = "xlnx,zynqmp-clk";
-			clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
-			clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/connector/gocontroll,moduline-module-slot.yaml b/Documentation/devicetree/bindings/connector/gocontroll,moduline-module-slot.yaml
new file mode 100644
index 000000000000..a16ae2762d16
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/gocontroll,moduline-module-slot.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/gocontroll,moduline-module-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GOcontroll Moduline Module slot
+
+maintainers:
+  - Maud Spierings <maudspierings@gocontroll.com>
+
+description:
+  The GOcontroll Moduline module slot represents a connector that fullfills the
+  Moduline slot specification, and can thus house any IO module that is also
+  built to this spec.
+
+properties:
+  compatible:
+    const: gocontroll,moduline-module-slot
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: indicates readiness, high means busy.
+    maxItems: 1
+  reset-gpios:
+    description: resets the module, active low.
+    maxItems: 1
+  sync-gpios:
+    description: sync line between all module slots.
+    maxItems: 1
+
+  vdd-supply:
+    description: low power 3v3 supply generally for the microcontroller.
+  vddp-supply:
+    description: medium power 5v0 supply for on module low power peripherals.
+  vddhpp-supply:
+    description: high power 6v-8v supply for on module high power peripherals.
+  power-supply:
+    description: high power 6v-30v supply for high power module circuits.
+
+  i2c-bus:
+    description: i2c bus shared between module slots and the SoC
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  slot-number:
+    description:
+      The number of the module slot representing the location of on the pcb.
+      This enables access to the modules based on slot location.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - interrupts
+  - sync-gpios
+  - i2c-bus
+  - slot-number
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        connector@0 {
+            reg = <0>;
+            compatible = "gocontroll,moduline-module-slot";
+            reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+            sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&reg_3v3_per>;
+            vddp-supply = <&reg_5v0>;
+            vddhpp-supply = <&reg_6v4>;
+            i2c-bus = <&i2c2>;
+            slot-number = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659fa610..11e40d225b9f 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -30,6 +30,9 @@ properties:
           - const: samsung,usb-connector-11pin
           - const: usb-b-connector
 
+  reg:
+    maxItems: 1
+
   label:
     description: Symbolic name for the connector.
 
@@ -63,7 +66,6 @@ properties:
       Particularly, if use an output GPIO to control a VBUS regulator, should
       model it as a regulator. See bindings/regulator/fixed-regulator.yaml
 
-  # The following are optional properties for "usb-c-connector".
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
@@ -104,8 +106,7 @@ properties:
       - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
         Type-C Cable and Connector specification, when Power Delivery is not
         supported.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - default
       - 1.5A
@@ -117,30 +118,6 @@ properties:
 
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
-  source-pdos:
-    description: An array of u32 with each entry providing supported power
-      source data object(PDO), the detailed bit definitions of PDO can be found
-      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-      Source_Capabilities Message, the order of each entry(PDO) should follow
-      the PD spec chapter 6.4.1. Required for power source and power dual role.
-      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-      defined in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  sink-pdos:
-    description: An array of u32 with each entry providing supported power sink
-      data object(PDO), the detailed bit definitions of PDO can be found in
-      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-      Sink Capabilities Message, the order of each entry(PDO) should follow the
-      PD spec chapter 6.4.1. Required for power sink and power dual role. User
-      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-      in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
   sink-vdos:
     description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
       providing additional information corresponding to the product, the detailed bit
@@ -164,10 +141,50 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  op-sink-microwatt:
-    description: Sink required operating power in microwatt, if source can't
-      offer the power, Capability Mismatch is set. Required for power sink and
-      power dual role.
+  accessory-mode-audio:
+    type: boolean
+    description: Whether the device supports Audio Adapter Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  accessory-mode-debug:
+    type: boolean
+    description: Whether the device supports Debug Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  altmodes:
+    type: object
+    description: List of Alternative Modes supported by the schematics on the
+      particular device. This is only necessary if there are no other means to
+      discover supported alternative modes (e.g. through the UCSI firmware
+      interface).
+
+    additionalProperties: false
+
+    patternProperties:
+      "^(displayport)$":
+        type: object
+        description:
+          A single USB-C Alternative Mode as supported by the USB-C connector logic.
+
+        additionalProperties: false
+
+        properties:
+          svid:
+            $ref: /schemas/types.yaml#/definitions/uint16
+            description: Unique value assigned by USB-IF to the Vendor / AltMode.
+            enum: [ 0xff01 ]
+          vdo:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: VDO returned by Discover Modes USB PD command.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: OF graph bindings modeling a data bus to the connector, e.g.
+      there is a single High Speed (HS) port present in this connector. If there
+      is more than one bus (several port, with 'reg' property), they can be grouped
+      under 'ports'.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -218,18 +235,114 @@ properties:
       state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
       Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W -
       5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during
-      SNK_DISCOVERY) and the actual currrent limit after reception of PS_Ready for PD link or during
+      SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during
       SNK_READY for non-pd link.
     type: boolean
 
+  capabilities:
+    description: A child node to contain all the selectable USB Power Delivery capabilities.
+    type: object
+
+    patternProperties:
+      "^caps-[0-9]+$":
+        description: Child nodes under "capabilities" node. Each node contains a selectable USB
+          Power Delivery capability.
+        type: object
+        $ref: "#/$defs/capabilities"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  sink-wait-cap-time-ms:
+    description: Represents the max time in ms that USB Type-C port (in sink
+      role) should wait for the port partner (source role) to send source caps.
+      SinkWaitCap timer starts when port in sink role attaches to the source.
+      This timer will stop when sink receives PD source cap advertisement before
+      timeout in which case it'll move to capability negotiation stage. A
+      timeout leads to a hard reset message by the port.
+    minimum: 310
+    maximum: 620
+    default: 310
+
+  ps-source-off-time-ms:
+    description: Represents the max time in ms that a DRP in source role should
+      take to turn off power after the PsSourceOff timer starts. PsSourceOff
+      timer starts when a sink's PHY layer receives EOP of the GoodCRC message
+      (corresponding to an Accept message sent in response to a PR_Swap or a
+      FR_Swap request). This timer stops when last bit of GoodCRC EOP
+      corresponding to the received PS_RDY message is transmitted by the PHY
+      layer. A timeout shall lead to error recovery in the type-c port.
+    minimum: 750
+    maximum: 920
+    default: 920
+
+  cc-debounce-time-ms:
+    description: Represents the max time in ms that a port shall wait to
+      determine if it's attached to a partner.
+    minimum: 100
+    maximum: 200
+    default: 200
+
+  sink-bc12-completion-time-ms:
+    description: Represents the max time in ms that a port in sink role takes
+      to complete Battery Charger (BC1.2) Detection. BC1.2 detection is a
+      hardware mechanism, which in some TCPC implementations, can run in
+      parallel once the Type-C connection state machine reaches the "potential
+      connect as sink" state. In TCPCs where this causes delays to respond to
+      the incoming PD messages, sink-bc12-completion-time-ms is used to delay
+      PD negotiation till BC1.2 detection completes.
+    default: 0
+
+  pd-revision:
+    description: Specifies the maximum USB PD revision and version supported by
+      the connector. This property is specified in the following order;
+      <revision_major, revision_minor, version_major, version_minor>.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4
+
 dependencies:
-  sink-vdos-v1: [ 'sink-vdos' ]
-  sink-vdos: [ 'sink-vdos-v1' ]
+  sink-vdos-v1: [ sink-vdos ]
+  sink-vdos: [ sink-vdos-v1 ]
 
 required:
   - compatible
 
+$defs:
+  capabilities:
+    type: object
+
+    properties:
+      source-pdos:
+        description: An array of u32 with each entry providing supported power
+          source data object(PDO), the detailed bit definitions of PDO can be found
+          in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+          Source_Capabilities Message, the order of each entry(PDO) should follow
+          the PD spec chapter 6.4.1. Required for power source and power dual role.
+          User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+          defined in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      sink-pdos:
+        description: An array of u32 with each entry providing supported power sink
+          data object(PDO), the detailed bit definitions of PDO can be found in
+          "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+          Sink Capabilities Message, the order of each entry(PDO) should follow the
+          PD spec chapter 6.4.1. Required for power sink and power dual role. User
+          can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+          in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      op-sink-microwatt:
+        description: Sink required operating power in microwatt, if source can't
+          offer the power, Capability Mismatch is set. Required for power sink and
+          power dual role.
+
 allOf:
+  - $ref: "#/$defs/capabilities"
   - if:
       properties:
         compatible:
@@ -258,17 +371,17 @@ anyOf:
         - typec-power-opmode
         - new-source-frs-typec-current
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
   - |
     muic-max77843 {
-      usb_con1: connector {
-        compatible = "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
-      };
+        usb_con1: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
     };
 
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
@@ -276,51 +389,75 @@ examples:
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
   - |
     ccic: s2mm005 {
-      usb_con2: connector {
-        compatible = "usb-c-connector";
-        label = "USB-C";
+        usb_con2: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+
+            altmodes {
+                displayport {
+                    svid = /bits/ 16 <0xff01>;
+                    vdo = <0x00001c46>;
+                };
+            };
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            usb_con_hs: endpoint {
-              remote-endpoint = <&max77865_usbc_hs>;
-            };
-          };
-          port@1 {
-            reg = <1>;
-            usb_con_ss: endpoint {
-              remote-endpoint = <&usbdrd_phy_ss>;
-            };
-          };
-          port@2 {
-            reg = <2>;
-            usb_con_sbu: endpoint {
-              remote-endpoint = <&dp_aux>;
+                port@0 {
+                    reg = <0>;
+                    usb_con_hs: endpoint {
+                        remote-endpoint = <&max77865_usbc_hs>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&usbdrd_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&dp_aux>;
+                    };
+                };
             };
-          };
         };
-      };
     };
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
-  # power delivery support and enables drp.
+  # power delivery support, explicitly defines time properties and enables drp.
   - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
-      usb_con3: connector {
+        usb_con3: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                         PDO_VAR(5000, 12000, 2000)>;
+            op-sink-microwatt = <10000000>;
+            sink-wait-cap-time-ms = <465>;
+            ps-source-off-time-ms = <835>;
+            cc-debounce-time-ms = <101>;
+            sink-bc12-completion-time-ms = <500>;
+        };
+    };
+
+  # USB-C connector attached to SoC with a single High-Speed controller
+  - |
+    connector {
         compatible = "usb-c-connector";
         label = "USB-C";
-        power-role = "dual";
-        try-power-role = "sink";
-        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-                     PDO_VAR(5000, 12000, 2000)>;
-        op-sink-microwatt = <10000000>;
-      };
+
+        port {
+            high_speed_ep: endpoint {
+                remote-endpoint = <&usb_hs_ep>;
+            };
+        };
     };
 
   # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
@@ -333,20 +470,20 @@ examples:
         data-role = "dual";
 
         ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                port@0 {
-                        reg = <0>;
-                        hs_ep: endpoint {
-                                remote-endpoint = <&usb3_hs_ep>;
-                        };
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                hs_ep: endpoint {
+                    remote-endpoint = <&usb3_hs_ep>;
                 };
-                port@1 {
-                        reg = <1>;
-                        ss_ep: endpoint {
-                                remote-endpoint = <&hd3ss3220_in_ep>;
-                        };
+            };
+            port@1 {
+                reg = <1>;
+                ss_ep: endpoint {
+                    remote-endpoint = <&hd3ss3220_in_ep>;
                 };
+            };
         };
     };
 
@@ -355,12 +492,12 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-      connector {
-        compatible = "gpio-usb-b-connector", "usb-b-connector";
-        type = "micro";
-        id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
-        vbus-supply = <&usb_p0_vbus>;
-      };
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
     };
 
   # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
@@ -368,27 +505,27 @@ examples:
   # mobile phone
   - |
     muic-max77843 {
-      usb_con4: connector {
-        compatible = "samsung,usb-connector-11pin", "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
+        usb_con4: connector {
+            compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            muic_to_usb: endpoint {
-              remote-endpoint = <&usb_to_muic>;
-            };
-          };
-          port@3 {
-            reg = <3>;
-            usb_con_mhl: endpoint {
-              remote-endpoint = <&sii8620_mhl>;
+                port@0 {
+                    reg = <0>;
+                    muic_to_usb: endpoint {
+                        remote-endpoint = <&usb_to_muic>;
+                    };
+                };
+                port@3 {
+                    reg = <3>;
+                    usb_con_mhl: endpoint {
+                        remote-endpoint = <&sii8620_mhl>;
+                    };
+                };
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml b/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml
new file mode 100644
index 000000000000..384ca63b64d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/fsl,ftm-quaddec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FlexTimer Quadrature decoder counter
+
+description:
+  Exposes a simple counter for the quadrature decoder mode.
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ftm-quaddec
+
+  reg:
+    maxItems: 1
+
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    counter@29d0000 {
+       compatible = "fsl,ftm-quaddec";
+       reg = <0x29d0000 0x10000>;
+       big-endian;
+    };
diff --git a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
deleted file mode 100644
index 4d18cd722074..000000000000
--- a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-FlexTimer Quadrature decoder counter
-
-This driver exposes a simple counter for the quadrature decoder mode.
-
-Required properties:
-- compatible:		Must be "fsl,ftm-quaddec".
-- reg:			Must be set to the memory region of the flextimer.
-
-Optional property:
-- big-endian:		Access the device registers in big-endian mode.
-
-Example:
-		counter0: counter@29d0000 {
-			compatible = "fsl,ftm-quaddec";
-			reg = <0x0 0x29d0000 0x0 0x10000>;
-			big-endian;
-			status = "disabled";
-		};
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
index 85f1ff83afe7..c882ab5fcf1f 100644
--- a/Documentation/devicetree/bindings/counter/ti-eqep.yaml
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,am3352-eqep
+    enum:
+      - ti,am3352-eqep
+      - ti,am62-eqep
 
   reg:
     maxItems: 1
@@ -21,19 +23,35 @@ properties:
     maxItems: 1
 
   clocks:
-    description: The clock that determines the SYSCLKOUT rate for the eQEP
-      peripheral.
+    description: The functional and interface clock that determines the clock
+      rate for the eQEP peripheral.
     maxItems: 1
 
   clock-names:
     const: sysclkout
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-eqep
+    then:
+      properties:
+        clock-names: false
+
+      required:
+        - power-domains
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
-  - clock-names
 
 additionalProperties: false
 
@@ -43,7 +61,6 @@ examples:
         compatible = "ti,am3352-eqep";
         reg = <0x180 0x80>;
         clocks = <&l4ls_gclk>;
-        clock-names = "sysclkout";
         interrupts = <79>;
     };
 
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
index 380e21c5fc7e..f28e1adad428 100644
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
@@ -1,12 +1,12 @@
 ==========================================
-ARM CPUs capacity bindings
+CPU capacity bindings
 ==========================================
 
 ==========================================
 1 - Introduction
 ==========================================
 
-ARM systems may be configured to have cpus with different power/performance
+Some systems may be configured to have cpus with different power/performance
 characteristics within the same chip. In this case, additional information has
 to be made available to the kernel for it to be aware of such differences and
 take decisions accordingly.
@@ -62,8 +62,8 @@ Example 1 (ARM 64-bit, 6-cpu system, two clusters):
 The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
 are 1024 and 578 for cluster0 and cluster1. Further normalization
 is done by the operating system based on cluster0@max-freq=1100 and
-custer1@max-freq=850, final capacities are 1024 for cluster0 and
-446 for cluster1 (576*850/1100).
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
 
 cpus {
 	#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/cpu/cpu-topology.txt b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
deleted file mode 100644
index 9bd530a35d14..000000000000
--- a/Documentation/devicetree/bindings/cpu/cpu-topology.txt
+++ /dev/null
@@ -1,553 +0,0 @@
-===========================================
-CPU topology binding description
-===========================================
-
-===========================================
-1 - Introduction
-===========================================
-
-In a SMP system, the hierarchy of CPUs is defined through three entities that
-are used to describe the layout of physical CPUs in the system:
-
-- socket
-- cluster
-- core
-- thread
-
-The bottom hierarchy level sits at core or thread level depending on whether
-symmetric multi-threading (SMT) is supported or not.
-
-For instance in a system where CPUs support SMT, "cpu" nodes represent all
-threads existing in the system and map to the hierarchy level "thread" above.
-In systems where SMT is not supported "cpu" nodes represent all cores present
-in the system and map to the hierarchy level "core" above.
-
-CPU topology bindings allow one to associate cpu nodes with hierarchical groups
-corresponding to the system hierarchy; syntactically they are defined as device
-tree nodes.
-
-Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be
-used for any other architecture as well.
-
-The cpu nodes, as per bindings defined in [4], represent the devices that
-correspond to physical CPUs and are to be mapped to the hierarchy levels.
-
-A topology description containing phandles to cpu nodes that are not compliant
-with bindings standardized in [4] is therefore considered invalid.
-
-===========================================
-2 - cpu-map node
-===========================================
-
-The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct
-child of the cpus node and provides a container where the actual topology
-nodes are listed.
-
-- cpu-map node
-
-	Usage: Optional - On SMP systems provide CPUs topology to the OS.
-			  Uniprocessor systems do not require a topology
-			  description and therefore should not define a
-			  cpu-map node.
-
-	Description: The cpu-map node is just a container node where its
-		     subnodes describe the CPU topology.
-
-	Node name must be "cpu-map".
-
-	The cpu-map node's parent node must be the cpus node.
-
-	The cpu-map node's child nodes can be:
-
-	- one or more cluster nodes or
-	- one or more socket nodes in a multi-socket system
-
-	Any other configuration is considered invalid.
-
-The cpu-map node can only contain 4 types of child nodes:
-
-- socket node
-- cluster node
-- core node
-- thread node
-
-whose bindings are described in paragraph 3.
-
-The nodes describing the CPU topology (socket/cluster/core/thread) can
-only be defined within the cpu-map node and every core/thread in the
-system must be defined within the topology.  Any other configuration is
-invalid and therefore must be ignored.
-
-===========================================
-2.1 - cpu-map child nodes naming convention
-===========================================
-
-cpu-map child nodes must follow a naming convention where the node name
-must be "socketN", "clusterN", "coreN", "threadN" depending on the node type
-(ie socket/cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes
-which are siblings within a single common parent node must be given a unique and
-sequential N value, starting from 0).
-cpu-map child nodes which do not share a common parent node can have the same
-name (ie same number N as other cpu-map child nodes at different device tree
-levels) since name uniqueness will be guaranteed by the device tree hierarchy.
-
-===========================================
-3 - socket/cluster/core/thread node bindings
-===========================================
-
-Bindings for socket/cluster/cpu/thread nodes are defined as follows:
-
-- socket node
-
-	 Description: must be declared within a cpu-map node, one node
-		      per physical socket in the system. A system can
-		      contain single or multiple physical socket.
-		      The association of sockets and NUMA nodes is beyond
-		      the scope of this bindings, please refer [2] for
-		      NUMA bindings.
-
-	This node is optional for a single socket system.
-
-	The socket node name must be "socketN" as described in 2.1 above.
-	A socket node can not be a leaf node.
-
-	A socket node's child nodes must be one or more cluster nodes.
-
-	Any other configuration is considered invalid.
-
-- cluster node
-
-	 Description: must be declared within a cpu-map node, one node
-		      per cluster. A system can contain several layers of
-		      clustering within a single physical socket and cluster
-		      nodes can be contained in parent cluster nodes.
-
-	The cluster node name must be "clusterN" as described in 2.1 above.
-	A cluster node can not be a leaf node.
-
-	A cluster node's child nodes must be:
-
-	- one or more cluster nodes; or
-	- one or more core nodes
-
-	Any other configuration is considered invalid.
-
-- core node
-
-	Description: must be declared in a cluster node, one node per core in
-		     the cluster. If the system does not support SMT, core
-		     nodes are leaf nodes, otherwise they become containers of
-		     thread nodes.
-
-	The core node name must be "coreN" as described in 2.1 above.
-
-	A core node must be a leaf node if SMT is not supported.
-
-	Properties for core nodes that are leaf nodes:
-
-	- cpu
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle to the cpu node that corresponds to the
-			    core node.
-
-	If a core node is not a leaf node (CPUs supporting SMT) a core node's
-	child nodes can be:
-
-	- one or more thread nodes
-
-	Any other configuration is considered invalid.
-
-- thread node
-
-	Description: must be declared in a core node, one node per thread
-		     in the core if the system supports SMT. Thread nodes are
-		     always leaf nodes in the device tree.
-
-	The thread node name must be "threadN" as described in 2.1 above.
-
-	A thread node must be a leaf node.
-
-	A thread node must contain the following property:
-
-	- cpu
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle to the cpu node that corresponds to
-			    the thread node.
-
-===========================================
-4 - Example dts
-===========================================
-
-Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters in a single
-physical socket):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <2>;
-
-	cpu-map {
-		socket0 {
-			cluster0 {
-				cluster0 {
-					core0 {
-						thread0 {
-							cpu = <&CPU0>;
-						};
-						thread1 {
-							cpu = <&CPU1>;
-						};
-					};
-
-					core1 {
-						thread0 {
-							cpu = <&CPU2>;
-						};
-						thread1 {
-							cpu = <&CPU3>;
-						};
-					};
-				};
-
-				cluster1 {
-					core0 {
-						thread0 {
-							cpu = <&CPU4>;
-						};
-						thread1 {
-							cpu = <&CPU5>;
-						};
-					};
-
-					core1 {
-						thread0 {
-							cpu = <&CPU6>;
-						};
-						thread1 {
-							cpu = <&CPU7>;
-						};
-					};
-				};
-			};
-
-			cluster1 {
-				cluster0 {
-					core0 {
-						thread0 {
-							cpu = <&CPU8>;
-						};
-						thread1 {
-							cpu = <&CPU9>;
-						};
-					};
-					core1 {
-						thread0 {
-							cpu = <&CPU10>;
-						};
-						thread1 {
-							cpu = <&CPU11>;
-						};
-					};
-				};
-
-				cluster1 {
-					core0 {
-						thread0 {
-							cpu = <&CPU12>;
-						};
-						thread1 {
-							cpu = <&CPU13>;
-						};
-					};
-					core1 {
-						thread0 {
-							cpu = <&CPU14>;
-						};
-						thread1 {
-							cpu = <&CPU15>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU4: cpu@10000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU5: cpu@10001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU6: cpu@10100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU7: cpu@10101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU8: cpu@100000000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x0>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU9: cpu@100000001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x1>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU10: cpu@100000100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU11: cpu@100000101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU12: cpu@100010000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10000>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU13: cpu@100010001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10001>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU14: cpu@100010100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10100>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-
-	CPU15: cpu@100010101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x1 0x10101>;
-		enable-method = "spin-table";
-		cpu-release-addr = <0 0x20000000>;
-	};
-};
-
-Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <1>;
-
-	cpu-map {
-		cluster0 {
-			core0 {
-				cpu = <&CPU0>;
-			};
-			core1 {
-				cpu = <&CPU1>;
-			};
-			core2 {
-				cpu = <&CPU2>;
-			};
-			core3 {
-				cpu = <&CPU3>;
-			};
-		};
-
-		cluster1 {
-			core0 {
-				cpu = <&CPU4>;
-			};
-			core1 {
-				cpu = <&CPU5>;
-			};
-			core2 {
-				cpu = <&CPU6>;
-			};
-			core3 {
-				cpu = <&CPU7>;
-			};
-		};
-	};
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x0>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x1>;
-	};
-
-	CPU2: cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x2>;
-	};
-
-	CPU3: cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x3>;
-	};
-
-	CPU4: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x100>;
-	};
-
-	CPU5: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x101>;
-	};
-
-	CPU6: cpu@102 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x102>;
-	};
-
-	CPU7: cpu@103 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x103>;
-	};
-};
-
-Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system)
-
-{
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "sifive,fu540g", "sifive,fu500";
-	model = "sifive,hifive-unleashed-a00";
-
-	...
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu-map {
-			socket0 {
-				cluster0 {
-					core0 {
-						cpu = <&CPU1>;
-					};
-					core1 {
-						cpu = <&CPU2>;
-					};
-					core2 {
-						cpu0 = <&CPU2>;
-					};
-					core3 {
-						cpu0 = <&CPU3>;
-					};
-				};
-			};
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x1>;
-		}
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x2>;
-		}
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x3>;
-		}
-		CPU4: cpu@4 {
-			device_type = "cpu";
-			compatible = "sifive,rocket0", "riscv";
-			reg = <0x4>;
-		}
-	}
-};
-===============================================================================
-[1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.yaml
-[2] Devicetree NUMA binding description
-    Documentation/devicetree/bindings/numa.txt
-[3] RISC-V Linux kernel documentation
-    Documentation/devicetree/bindings/riscv/cpus.yaml
-[4] https://www.devicetree.org/specifications/
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
new file mode 100644
index 000000000000..385b0a511652
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -0,0 +1,928 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Idle states
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+  - Anup Patel <anup@brainfault.org>
+
+description: |+
+  ==========================================
+  1 - Introduction
+  ==========================================
+
+  ARM and RISC-V systems contain HW capable of managing power consumption
+  dynamically, where cores can be put in different low-power states (ranging
+  from simple wfi to power gating) according to OS PM policies. The CPU states
+  representing the range of dynamic idle states that a processor can enter at
+  run-time, can be specified through device tree bindings representing the
+  parameters required to enter/exit specific idle states on a given processor.
+
+  ==========================================
+  2 - ARM idle states
+  ==========================================
+
+  According to the Server Base System Architecture document (SBSA, [3]), the
+  power states an ARM CPU can be put into are identified by the following list:
+
+  - Running
+  - Idle_standby
+  - Idle_retention
+  - Sleep
+  - Off
+
+  The power states described in the SBSA document define the basic CPU states on
+  top of which ARM platforms implement power management schemes that allow an OS
+  PM implementation to put the processor in different idle states (which include
+  states listed above; "off" state is not an idle state since it does not have
+  wake-up capabilities, hence it is not considered in this document).
+
+  Idle state parameters (e.g. entry latency) are platform specific and need to
+  be characterized with bindings that provide the required information to OS PM
+  code so that it can build the required tables and use them at runtime.
+
+  The device tree binding definition for ARM idle states is the subject of this
+  document.
+
+  ==========================================
+  3 - RISC-V idle states
+  ==========================================
+
+  On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
+  suspend (or idle) states (ranging from simple WFI, power gating, etc). The
+  RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
+  standard mechanism for OS to request HART state transitions.
+
+  The platform specific suspend (or idle) states of a hart can be either
+  retentive or non-rententive in nature. A retentive suspend state will
+  preserve HART registers and CSR values for all privilege modes whereas
+  a non-retentive suspend state will not preserve HART registers and CSR
+  values.
+
+  ===========================================
+  4 - idle-states definitions
+  ===========================================
+
+  Idle states are characterized for a specific system through a set of
+  timing and energy related properties, that underline the HW behaviour
+  triggered upon idle states entry and exit.
+
+  The following diagram depicts the CPU execution phases and related timing
+  properties required to enter and exit an idle state:
+
+  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+              |          |           |          |          |
+
+              |<------ entry ------->|
+              |       latency        |
+                                                |<- exit ->|
+                                                |  latency |
+              |<-------- min-residency -------->|
+                         |<-------  wakeup-latency ------->|
+
+      Diagram 1: CPU idle state execution phases
+
+  EXEC:  Normal CPU execution.
+
+  PREP:  Preparation phase before committing the hardware to idle mode
+    like cache flushing. This is abortable on pending wake-up
+    event conditions. The abort latency is assumed to be negligible
+    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+    goes back to EXEC. This phase is optional. If not abortable,
+    this should be included in the ENTRY phase instead.
+
+  ENTRY:  The hardware is committed to idle mode. This period must run
+    to completion up to IDLE before anything else can happen.
+
+  IDLE:  This is the actual energy-saving idle period. This may last
+    between 0 and infinite time, until a wake-up event occurs.
+
+  EXIT:  Period during which the CPU is brought back to operational
+    mode (EXEC).
+
+  entry-latency: Worst case latency required to enter the idle state. The
+  exit-latency may be guaranteed only after entry-latency has passed.
+
+  min-residency: Minimum period, including preparation and entry, for a given
+  idle state to be worthwhile energywise.
+
+  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+  CPU being able to execute normal code again. If not specified, this is assumed
+  to be entry-latency + exit-latency.
+
+  These timing parameters can be used by an OS in different circumstances.
+
+  An idle CPU requires the expected min-residency time to select the most
+  appropriate idle state based on the expected expiry time of the next IRQ
+  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
+
+  An operating system scheduler may need to compute the shortest wake-up delay
+  for CPUs in the system by detecting how long will it take to get a CPU out
+  of an idle state, e.g.:
+
+  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+  In other words, the scheduler can make its scheduling decision by selecting
+  (e.g. waking-up) the CPU with the shortest wake-up delay.
+  The wake-up delay must take into account the entry latency if that period
+  has not expired. The abortable nature of the PREP period can be ignored
+  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+  the worst case since it depends on the CPU operating conditions, i.e. caches
+  state).
+
+  An OS has to reliably probe the wakeup-latency since some devices can enforce
+  latency constraint guarantees to work properly, so the OS has to detect the
+  worst case wake-up latency it can incur if a CPU is allowed to enter an
+  idle state, and possibly to prevent that to guarantee reliable device
+  functioning.
+
+  The min-residency time parameter deserves further explanation since it is
+  expressed in time units but must factor in energy consumption coefficients.
+
+  The energy consumption of a cpu when it enters a power state can be roughly
+  characterised by the following graph:
+
+                 |
+                 |
+                 |
+             e   |
+             n   |                                      /---
+             e   |                               /------
+             r   |                        /------
+             g   |                  /-----
+             y   |           /------
+                 |       ----
+                 |      /|
+                 |     / |
+                 |    /  |
+                 |   /   |
+                 |  /    |
+                 | /     |
+                 |/      |
+            -----|-------+----------------------------------
+                0|       1                              time(ms)
+
+      Graph 1: Energy vs time example
+
+  The graph is split in two parts delimited by time 1ms on the X-axis.
+  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+  and denotes the energy costs incurred while entering and leaving the idle
+  state.
+  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+  shallower slope and essentially represents the energy consumption of the idle
+  state.
+
+  min-residency is defined for a given idle state as the minimum expected
+  residency time for a state (inclusive of preparation and entry) after
+  which choosing that state become the most energy efficient option. A good
+  way to visualise this, is by taking the same graph above and comparing some
+  states energy consumptions plots.
+
+  For sake of simplicity, let's consider a system with two idle states IDLE1,
+  and IDLE2:
+
+            |
+            |
+            |
+            |                                                  /-- IDLE1
+         e  |                                              /---
+         n  |                                         /----
+         e  |                                     /---
+         r  |                                /-----/--------- IDLE2
+         g  |                    /-------/---------
+         y  |        ------------    /---|
+            |       /           /----    |
+            |      /        /---         |
+            |     /    /----             |
+            |    / /---                  |
+            |   ---                      |
+            |  /                         |
+            | /                          |
+            |/                           |                  time
+         ---/----------------------------+------------------------
+            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                         |
+                                  IDLE2-min-residency
+
+      Graph 2: idle states min-residency example
+
+  In graph 2 above, that takes into account idle states entry/exit energy
+  costs, it is clear that if the idle state residency time (i.e. time till next
+  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+  choice energywise.
+
+  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+  than IDLE2.
+
+  However, the lower power consumption (i.e. shallower energy curve slope) of
+  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+  efficient.
+
+  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+  shallower states in a system with multiple idle states) is defined
+  IDLE2-min-residency and corresponds to the time when energy consumption of
+  IDLE1 and IDLE2 states breaks even.
+
+  The definitions provided in this section underpin the idle states
+  properties specification that is the subject of the following sections.
+
+  ===========================================
+  5 - idle-states node
+  ===========================================
+
+  The processor idle states are defined within the idle-states node, which is
+  a direct child of the cpus node [1] and provides a container where the
+  processor idle states, defined as device tree nodes, are listed.
+
+  On ARM systems, it is a container of processor idle states nodes. If the
+  system does not provide CPU power management capabilities, or the processor
+  just supports idle_standby, an idle-states node is not required.
+
+  ===========================================
+  6 - Qualcomm specific STATES
+  ===========================================
+
+  Idle states have different enter/exit latency and residency values.
+  The idle states supported by the QCOM SoC are defined as -
+
+    * Standby
+    * Retention
+    * Standalone Power Collapse (Standalone PC or SPC)
+    * Power Collapse (PC)
+
+  Standby: Standby does a little more in addition to architectural clock gating.
+  When the WFI instruction is executed the ARM core would gate its internal
+  clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+  trigger to execute the SPM state machine. The SPM state machine waits for the
+  interrupt to trigger the core back in to active. This triggers the cache
+  hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+  the SPM state machine out of its wait, the next step is to ensure that the
+  cache hierarchy is also out of standby, and then the cpu is allowed to resume
+  execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+  driver and is not defined in the DT. The SPM state machine should be
+  configured to execute this state by default and after executing every other
+  state below.
+
+  Retention: Retention is a low power state where the core is clock gated and
+  the memory and the registers associated with the core are retained. The
+  voltage may be reduced to the minimum value needed to keep the processor
+  registers active. The SPM should be configured to execute the retention
+  sequence and would wait for interrupt, before restoring the cpu to execution
+  state. Retention may have a slightly higher latency than Standby.
+
+  Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+  between the time it enters idle and the next known wake up. SPC mode is used
+  to indicate a core entering a power down state without consulting any other
+  cpu or the system resources. This helps save power only on that core.  The SPM
+  sequence for this idle state is programmed to power down the supply to the
+  core, wait for the interrupt, restore power to the core, and ensure the
+  system state including cache hierarchy is ready before allowing core to
+  resume. Applying power and resetting the core causes the core to warmboot
+  back into Elevation Level (EL) which trampolines the control back to the
+  kernel. Entering a power down state for the cpu, needs to be done by trapping
+  into a EL. Failing to do so, would result in a crash enforced by the warm boot
+  code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+  be flushed in s/w, before powering down the core.
+
+  Power Collapse: This state is similar to the SPC mode, but distinguishes
+  itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+  modes. In a hierarchical power domain SoC, this means L2 and other caches can
+  be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+  voltages reduced, provided all cpus enter this state.  Since the span of low
+  power modes possible at this state is vast, the exit latency and the residency
+  of this low power mode would be considered high even though at a cpu level,
+  this essentially is cpu power down. The SPM in this state also may handshake
+  with the Resource power manager (RPM) processor in the SoC to indicate a
+  complete application processor subsystem shut down.
+
+  ===========================================
+  7 - References
+  ===========================================
+
+  [1] ARM Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/arm/cpus.yaml
+
+  [2] ARM Linux Kernel documentation - PSCI bindings
+      Documentation/devicetree/bindings/arm/psci.yaml
+
+  [3] ARM Server Base System Architecture (SBSA)
+      http://infocenter.arm.com/help/index.jsp
+
+  [4] ARM Architecture Reference Manuals
+      http://infocenter.arm.com/help/index.jsp
+
+  [5] ARM Linux Kernel documentation - Booting AArch64 Linux
+      Documentation/arch/arm64/booting.rst
+
+  [6] RISC-V Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  [7] RISC-V Supervisor Binary Interface (SBI)
+      http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
+
+properties:
+  $nodename:
+    const: idle-states
+
+  entry-method:
+    description: |
+      Usage and definition depend on ARM architecture version.
+
+      On ARM v8 64-bit this property is required.
+      On ARM 32-bit systems this property is optional
+
+      This assumes that the "enable-method" property is set to "psci" in the cpu
+      node[5] that is responsible for setting up CPU idle management in the OS
+      implementation.
+    const: psci
+
+patternProperties:
+  "^(cpu|cluster)-":
+    type: object
+    description: |
+      Each state node represents an idle state description and must be defined
+      as follows.
+
+      The idle state entered by executing the wfi instruction (idle_standby
+      SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
+      therefore must not be listed.
+
+      In addition to the properties listed above, a state node may require
+      additional properties specific to the entry-method defined in the
+      idle-states node. Please refer to the entry-method bindings
+      documentation for properties definitions.
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - enum:
+                  - qcom,idle-state-ret
+                  - qcom,idle-state-spc
+                  - qcom,idle-state-pc
+              - const: arm,idle-state
+          - enum:
+              - arm,idle-state
+              - riscv,idle-state
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+      riscv,sbi-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
+
+          This property is required in idle state nodes of device tree meant
+          for RISC-V systems. For more details on the suspend_type parameter
+          refer the SBI specification v0.3 (or higher) [7].
+
+      local-timer-stop:
+        description:
+          If present the CPU local timer control logic is
+             lost on state entry, otherwise it is retained.
+        type: boolean
+
+      entry-latency-us:
+        description:
+          Worst case latency in microseconds required to enter the idle state.
+
+      exit-latency-us:
+        description:
+          Worst case latency in microseconds required to exit the idle state.
+          The exit-latency-us duration may be guaranteed only after
+          entry-latency-us has passed.
+
+      min-residency-us:
+        description:
+          Minimum residency duration in microseconds, inclusive of preparation
+          and entry, for this idle state to be considered worthwhile energy wise
+          (refer to section 2 of this document for a complete description).
+
+      wakeup-latency-us:
+        description: |
+          Maximum delay between the signaling of a wake-up event and the CPU
+          being able to execute normal code again. If omitted, this is assumed
+          to be equal to:
+
+            entry-latency-us + exit-latency-us
+
+          It is important to supply this value on systems where the duration of
+          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
+          systems entry-latency-us + exit-latency-us will exceed
+          wakeup-latency-us by this duration.
+
+      idle-state-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          A string used as a descriptive name for the idle state.
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <2>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100000000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        idle-states {
+            entry-method = "psci";
+
+            CPU_RETENTION_0_0: cpu-retention-0-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CLUSTER_RETENTION_0: cluster-retention-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CPU_SLEEP_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_SLEEP_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RETENTION_1_0: cpu-retention-1-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <90>;
+            };
+
+            CLUSTER_RETENTION_1: cluster-retention-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <270>;
+                wakeup-latency-us = <100>;
+            };
+
+            CPU_SLEEP_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <70>;
+                exit-latency-us = <100>;
+                min-residency-us = <300>;
+                wakeup-latency-us = <150>;
+            };
+
+            CLUSTER_SLEEP_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <500>;
+                exit-latency-us = <1200>;
+                min-residency-us = <3500>;
+                wakeup-latency-us = <1300>;
+            };
+        };
+    };
+
+  - |
+    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x1>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@2 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x2>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@3 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x3>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x100>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x101>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@102 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x102>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@103 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x103>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        idle-states {
+            cpu_sleep_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <200>;
+                exit-latency-us = <100>;
+                min-residency-us = <400>;
+                wakeup-latency-us = <250>;
+            };
+
+            cluster_sleep_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <500>;
+                exit-latency-us = <1500>;
+                min-residency-us = <2500>;
+                wakeup-latency-us = <1700>;
+            };
+
+            cpu_sleep_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <300>;
+                exit-latency-us = <500>;
+                min-residency-us = <900>;
+                wakeup-latency-us = <600>;
+            };
+
+            cluster_sleep_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <800>;
+                exit-latency-us = <2000>;
+                min-residency-us = <6500>;
+                wakeup-latency-us = <2300>;
+            };
+        };
+    };
+
+  - |
+    // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x0>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc0: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x1>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc1: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@10 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x10>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc10: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@11 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x11>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc11: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        idle-states {
+            CPU_RET_0_0: cpu-retentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_0_0: cpu-nonretentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_0: cluster-retentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000000>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_0: cluster-nonretentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000000>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RET_1_0: cpu-retentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000010>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_1_0: cpu-nonretentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000010>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_1: cluster-retentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000010>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_1: cluster-nonretentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000010>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+        };
+    };
+
+    // Example 4 - Qualcomm SPC
+    idle-states {
+      cpu_spc: cpu-spc {
+        compatible = "qcom,idle-state-spc", "arm,idle-state";
+        entry-latency-us = <150>;
+        exit-latency-us = <200>;
+        min-residency-us = <2000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml
new file mode 100644
index 000000000000..7d4510b3219c
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/airoha,en7581-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 CPUFreq
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  On newer Airoha SoC, CPU Frequency is scaled indirectly with SMC commands
+  to ATF.
+
+  A virtual clock is exposed. This virtual clock is a get-only clock and
+  is used to expose the current global CPU clock. The frequency info comes
+  by the output of the SMC command that reports the clock in MHz.
+
+  The SMC sets the CPU clock by providing an index, this is modelled as
+  performance states in a power domain.
+
+  CPUs can't be individually scaled as the CPU frequency is shared across
+  all CPUs and is global.
+
+properties:
+  compatible:
+    const: airoha,en7581-cpufreq
+
+  '#clock-cells':
+    const: 0
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    performance-domain {
+        compatible = "airoha,en7581-cpufreq";
+
+        operating-points-v2 = <&cpu_smcc_opp_table>;
+
+        #power-domain-cells = <0>;
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
new file mode 100644
index 000000000000..b51913a81791
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC cluster cpufreq device
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
+  the cluster management register block. This binding uses the standard
+  operating-points-v2 table to define the CPU performance states, with the
+  opp-level property specifying the hardware p-state index for that level.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-cluster-cpufreq
+              - apple,t8112-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - enum:
+              - apple,s8000-cluster-cpufreq
+              - apple,t8010-cluster-cpufreq
+              - apple,t8015-cluster-cpufreq
+              - apple,t6000-cluster-cpufreq
+          - const: apple,t8103-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t7000-cluster-cpufreq
+          - const: apple,s5l8960x-cluster-cpufreq
+      - const: apple,s5l8960x-cluster-cpufreq
+      - items:
+          - const: apple,t6020-cluster-cpufreq
+          - const: apple,t8112-cluster-cpufreq
+
+  reg:
+    maxItems: 1
+
+  '#performance-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#performance-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // This example shows a single CPU per domain and 2 domains,
+    // with two p-states per domain.
+    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "apple,icestorm";
+        device_type = "cpu";
+        reg = <0x0 0x0>;
+        operating-points-v2 = <&ecluster_opp>;
+        performance-domains = <&cpufreq_e>;
+      };
+
+      cpu@10100 {
+        compatible = "apple,firestorm";
+        device_type = "cpu";
+        reg = <0x0 0x10100>;
+        operating-points-v2 = <&pcluster_opp>;
+        performance-domains = <&cpufreq_p>;
+      };
+    };
+
+    ecluster_opp: opp-table-0 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <7500>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <972000000>;
+        opp-level = <2>;
+        clock-latency-ns = <22000>;
+      };
+    };
+
+    pcluster_opp: opp-table-1 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <8000>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <828000000>;
+        opp-level = <2>;
+        clock-latency-ns = <19000>;
+      };
+    };
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      cpufreq_e: performance-controller@210e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x10e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+
+      cpufreq_p: performance-controller@211e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x11e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f12..ce91a9197697 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
deleted file mode 100644
index 1d7e49167666..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Generic cpufreq driver
-
-It is a generic DT based cpufreq driver for frequency management.  It supports
-both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
-clock and voltage across all CPUs.
-
-Both required and optional properties listed below must be defined
-under node /cpus/cpu@0.
-
-Required properties:
-- None
-
-Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
-  details. OPPs *must* be supplied either via DT, i.e. this property, or
-  populated at runtime.
-- clock-latency: Specify the possible maximum transition latency for clock,
-  in unit of nanoseconds.
-- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
-- #cooling-cells:
-     Please refer to
-     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
-
-Examples:
-
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	cpu@0 {
-		compatible = "arm,cortex-a9";
-		reg = <0>;
-		next-level-cache = <&L2>;
-		operating-points = <
-			/* kHz    uV */
-			792000  1100000
-			396000  950000
-			198000  850000
-		>;
-		clock-latency = <61036>; /* two CLK32 periods */
-		#cooling-cells = <2>;
-	};
-
-	cpu@1 {
-		compatible = "arm,cortex-a9";
-		reg = <1>;
-		next-level-cache = <&L2>;
-	};
-
-	cpu@2 {
-		compatible = "arm,cortex-a9";
-		reg = <2>;
-		next-level-cache = <&L2>;
-	};
-
-	cpu@3 {
-		compatible = "arm,cortex-a9";
-		reg = <3>;
-		next-level-cache = <&L2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
index 9cd42a64b13e..d0aecde2b89b 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek's CPUFREQ Bindings
+title: MediaTek's CPUFREQ
 
 maintainers:
   - Hector Yuan <hector.yuan@mediatek.com>
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
deleted file mode 100644
index b8233ec91d3d..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ /dev/null
@@ -1,243 +0,0 @@
-Binding for MediaTek's CPUFreq driver
-=====================================
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
-	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-	for detail.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-- #cooling-cells:
-	For details, please refer to
-	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-
-Example 1 (MT7623 SoC):
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-598000000 {
-			opp-hz = /bits/ 64 <598000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-747500000 {
-			opp-hz = /bits/ 64 <747500000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-1040000000 {
-			opp-hz = /bits/ 64 <1040000000>;
-			opp-microvolt = <1150000>;
-		};
-
-		opp-1196000000 {
-			opp-hz = /bits/ 64 <1196000000>;
-			opp-microvolt = <1200000>;
-		};
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1300000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x0>;
-		clocks = <&infracfg CLK_INFRA_CPUSEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table>;
-		#cooling-cells = <2>;
-	};
-	cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x1>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x2>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x3>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-
-Example 2 (MT8173 SoC):
-	cpu_opp_table_a: opp_table_a {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <859000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <908000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <983000>;
-		};
-
-		opp-1105000000 {
-			opp-hz = /bits/ 64 <1105000000>;
-			opp-microvolt = <1009000>;
-		};
-
-		opp-1183000000 {
-			opp-hz = /bits/ 64 <1183000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1404000000>;
-			opp-microvolt = <1083000>;
-		};
-
-		opp-1508000000 {
-			opp-hz = /bits/ 64 <1508000000>;
-			opp-microvolt = <1109000>;
-		};
-
-		opp-1573000000 {
-			opp-hz = /bits/ 64 <1573000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu_opp_table_b: opp_table_b {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <828000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <867000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <927000>;
-		};
-
-		opp-1209000000 {
-			opp-hz = /bits/ 64 <1209000000>;
-			opp-microvolt = <968000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1007000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1612000000 {
-			opp-hz = /bits/ 64 <1612000000>;
-			opp-microvolt = <1049000>;
-		};
-
-		opp-1807000000 {
-			opp-hz = /bits/ 64 <1807000000>;
-			opp-microvolt = <1089000>;
-		};
-
-		opp-1989000000 {
-			opp-hz = /bits/ 64 <1989000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 9299028ee712..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
-	Usage:		required
-	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
-	Usage:		required
-	Value type:	<phandle> From common clock binding.
-	Definition:	clock handle for XO clock and GPLL0 clock.
-
-- clock-names
-	Usage:		required
-	Value type:	<string> From common clock binding.
-	Definition:	must be "xo", "alternate".
-
-- reg
-	Usage:		required
-	Value type:	<prop-encoded-array>
-	Definition:	Addresses and sizes for the memory of the HW bases in
-			each frequency domain.
-- reg-names
-	Usage:		Optional
-	Value type:	<string>
-	Definition:	Frequency domain name i.e.
-			"freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
-	Usage:		required.
-	Definition:	Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-				      compatible = "cache";
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu@500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu@600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu@700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-	};
-
- soc {
-	cpufreq_hw: cpufreq@17d43000 {
-		compatible = "qcom,cpufreq-hw";
-		reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
-		reg-names = "freq-domain0", "freq-domain1";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-		clock-names = "xo", "alternate";
-
-		#freq-domain-cells = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..2d42fc3d8ef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,qcs615-cpufreq-hw
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8180x-cpufreq-hw
+              - qcom,sdm670-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm8150-cpufreq-hw
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,qcs8300-cpufreq-epss
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8255p-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
+              - qcom,sar2130p-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdx75-cpufreq-epss
+              - qcom,sm4450-cpufreq-epss
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+              - qcom,sm8650-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 1
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+      - description: Frequency domain 3 register region
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+      - const: freq-domain3
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: dcvsh-irq-0
+      - const: dcvsh-irq-1
+      - const: dcvsh-irq-2
+      - const: dcvsh-irq-3
+
+  '#freq-domain-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,sar2130p-cpufreq-epss
+              - qcom,sdx75-cpufreq-epss
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs615-cpufreq-hw
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8255p-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8180x-cpufreq-hw
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm670-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm4450-cpufreq-epss
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm6375-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        # On some SoCs the Prime core shares the LMH irq with Big cores
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+
+        reg-names:
+          minItems: 4
+          maxItems: 4
+
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+        interrupt-names:
+          minItems: 4
+          maxItems: 4
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+            cache-unified;
+            cache-level = <3>;
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/mediatek,mt8196-cpufreq-hw.yaml b/Documentation/devicetree/bindings/cpufreq/mediatek,mt8196-cpufreq-hw.yaml
new file mode 100644
index 000000000000..5f3c7db3f3aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/mediatek,mt8196-cpufreq-hw.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/mediatek,mt8196-cpufreq-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Hybrid CPUFreq for MT8196/MT6991 series SoCs
+
+maintainers:
+  - Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
+
+description:
+  MT8196 uses CPUFreq management hardware that supports dynamic voltage
+  frequency scaling (dvfs), and can support several performance domains.
+
+properties:
+  compatible:
+    const: mediatek,mt8196-cpufreq-hw
+
+  reg:
+    items:
+      - description: FDVFS control register region
+      - description: OPP tables and control for performance domain 0
+      - description: OPP tables and control for performance domain 1
+      - description: OPP tables and control for performance domain 2
+
+  "#performance-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#performance-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a720";
+                enable-method = "psci";
+                performance-domains = <&performance 0>;
+                reg = <0x000>;
+            };
+
+            /* ... */
+
+            cpu6: cpu@600 {
+                device_type = "cpu";
+                compatible = "arm,cortex-x4";
+                enable-method = "psci";
+                performance-domains = <&performance 1>;
+                reg = <0x600>;
+            };
+
+            cpu7: cpu@700 {
+                device_type = "cpu";
+                compatible = "arm,cortex-x925";
+                enable-method = "psci";
+                performance-domains = <&performance 2>;
+                reg = <0x700>;
+            };
+    };
+
+    /* ... */
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@c2c2034 {
+            compatible = "mediatek,mt8196-cpufreq-hw";
+            reg = <0 0xc220400 0 0x20>, <0 0xc2c0f20 0 0x120>,
+                  <0 0xc2c1040 0 0x120>, <0 0xc2c1160 0 0x120>;
+            #performance-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 000000000000..547265b8b118
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq5332
+          - qcom,ipq6018
+          - qcom,ipq8064
+          - qcom,ipq8074
+          - qcom,ipq9574
+          - qcom,msm8909
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    allOf:
+      - if:
+          properties:
+            compatible:
+              enum:
+                - operating-points-v2-krait-cpu
+                - operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404
+
+    then:
+      properties:
+        cpus:
+          type: object
+
+          patternProperties:
+            '^cpu@[0-9a-f]+$':
+              type: object
+
+              properties:
+                power-domains:
+                  maxItems: 1
+
+                power-domain-names:
+                  items:
+                    - const: cpr
+
+              required:
+                - power-domains
+                - power-domain-names
+
+      patternProperties:
+        '^opp-table(-[a-z0-9]+)?$':
+          if:
+            properties:
+              compatible:
+                const: operating-points-v2-kryo-cpu
+          then:
+            patternProperties:
+              '^opp-?[0-9]+$':
+                required:
+                  - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/qemu,virtual-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/qemu,virtual-cpufreq.yaml
new file mode 100644
index 000000000000..018d98bcdc82
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qemu,virtual-cpufreq.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qemu,virtual-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtual CPUFreq
+
+maintainers:
+  - David Dai <davidai@google.com>
+  - Saravana Kannan <saravanak@google.com>
+
+description:
+  Virtual CPUFreq is a virtualized driver in guest kernels that sends performance
+  selection of its vCPUs as a hint to the host through MMIO regions. Each vCPU
+  is associated with a performance domain which can be shared with other vCPUs.
+  Each performance domain has its own set of registers for performance controls.
+
+properties:
+  compatible:
+    const: qemu,virtual-cpufreq
+
+  reg:
+    maxItems: 1
+    description:
+      Address and size of region containing performance controls for each of the
+      performance domains. Regions for each performance domain is placed
+      contiguously and contain registers for controlling DVFS(Dynamic Frequency
+      and Voltage) characteristics. The size of the region is proportional to
+      total number of performance domains.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@1040000 {
+        compatible = "qemu,virtual-cpufreq";
+        reg = <0x1040000 0x2000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
deleted file mode 100644
index 1758051798fe..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-TI CPUFreq and OPP bindings
-================================
-
-Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx
-families support different OPPs depending on the silicon variant in use.
-The ti-cpufreq driver can use revision and an efuse value from the SoC to
-provide the OPP framework with supported hardware information. This is
-used to determine which OPPs from the operating-points-v2 table get enabled
-when it is parsed by the OPP framework.
-
-Required properties:
---------------------
-In 'cpus' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
-	  omap34xx, omap36xx and am3517 SoCs
-- syscon: A phandle pointing to a syscon node representing the control module
-	  register space of the SoC.
-
-Optional properties:
---------------------
-- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
-- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
-
-For each opp entry in 'operating-points-v2' table:
-- opp-supported-hw: Two bitfields indicating:
-	1. Which revision of the SoC the OPP is supported by
-	2. Which eFuse bits indicate this OPP is available
-
-	A bitwise AND is performed against these values and if any bit
-	matches, the OPP gets enabled.
-
-Example:
---------
-
-/* From arch/arm/boot/dts/am33xx.dtsi */
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cpu@0 {
-		compatible = "arm,cortex-a8";
-		device_type = "cpu";
-		reg = <0>;
-
-		operating-points-v2 = <&cpu0_opp_table>;
-
-		clocks = <&dpll_mpu_ck>;
-		clock-names = "cpu";
-
-		clock-latency = <300000>; /* From omap-cpufreq driver */
-	};
-};
-
-/*
- * cpu0 has different OPPs depending on SoC revision and some on revisions
- * 0x2 and 0x4 have eFuse bits that indicate if they are available or not
- */
-cpu0_opp_table: opp-table {
-	compatible = "operating-points-v2-ti-cpu";
-	syscon = <&scm_conf>;
-
-	/*
-	 * The three following nodes are marked with opp-suspend
-	 * because they can not be enabled simultaneously on a
-	 * single SoC.
-	 */
-	opp50-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <950000 931000 969000>;
-		opp-supported-hw = <0x06 0x0010>;
-		opp-suspend;
-	};
-
-	opp100-275000000 {
-		opp-hz = /bits/ 64 <275000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x01 0x00FF>;
-		opp-suspend;
-	};
-
-	opp100-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x06 0x0020>;
-		opp-suspend;
-	};
-
-	opp100-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	opp100-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <1100000 1078000 1122000>;
-		opp-supported-hw = <0x06 0x0040>;
-	};
-
-	opp120-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <1200000 1176000 1224000>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	opp120-720000000 {
-		opp-hz = /bits/ 64 <720000000>;
-		opp-microvolt = <1200000 1176000 1224000>;
-		opp-supported-hw = <0x06 0x0080>;
-	};
-
-	oppturbo-720000000 {
-		opp-hz = /bits/ 64 <720000000>;
-		opp-microvolt = <1260000 1234800 1285200>;
-		opp-supported-hw = <0x01 0xFFFF>;
-	};
-
-	oppturbo-800000000 {
-		opp-hz = /bits/ 64 <800000000>;
-		opp-microvolt = <1260000 1234800 1285200>;
-		opp-supported-hw = <0x06 0x0100>;
-	};
-
-	oppnitro-1000000000 {
-		opp-hz = /bits/ 64 <1000000000>;
-		opp-microvolt = <1325000 1298500 1351500>;
-		opp-supported-hw = <0x04 0x0200>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 0429fb774f10..0401c11da8d9 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security System Device Tree Bindings
+title: Allwinner A10 Security System
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -44,6 +44,16 @@ properties:
       - const: ahb
       - const: mod
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   resets:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 00648f9d9278..da47b601c165 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -14,9 +14,11 @@ properties:
     enum:
       - allwinner,sun8i-h3-crypto
       - allwinner,sun8i-r40-crypto
+      - allwinner,sun20i-d1-crypto
       - allwinner,sun50i-a64-crypto
       - allwinner,sun50i-h5-crypto
       - allwinner,sun50i-h6-crypto
+      - allwinner,sun50i-h616-crypto
 
   reg:
     maxItems: 1
@@ -29,6 +31,7 @@ properties:
       - description: Bus clock
       - description: Module clock
       - description: MBus clock
+      - description: TRNG clock (RC oscillator)
     minItems: 2
 
   clock-names:
@@ -36,6 +39,7 @@ properties:
       - const: bus
       - const: mod
       - const: ram
+      - const: trng
     minItems: 2
 
   resets:
@@ -44,19 +48,34 @@ properties:
 if:
   properties:
     compatible:
-      const: allwinner,sun50i-h6-crypto
+      enum:
+        - allwinner,sun20i-d1-crypto
+        - allwinner,sun50i-h616-crypto
 then:
   properties:
     clocks:
-      minItems: 3
+      minItems: 4
     clock-names:
-      minItems: 3
+      minItems: 4
 else:
-  properties:
-    clocks:
-      maxItems: 2
-    clock-names:
-      maxItems: 2
+  if:
+    properties:
+      compatible:
+        const: allwinner,sun50i-h6-crypto
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+      clock-names:
+        minItems: 3
+        maxItems: 3
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+      clock-names:
+        maxItems: 2
 
 required:
   - compatible
@@ -82,4 +101,3 @@ examples:
       clock-names = "bus", "mod";
       resets = <&ccu RST_BUS_CE>;
     };
-
diff --git a/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml
new file mode 100644
index 000000000000..5fb708471059
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/amd,ccp-seattle-v1a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Cryptographic Coprocessor (ccp)
+
+maintainers:
+  - Tom Lendacky <thomas.lendacky@amd.com>
+
+properties:
+  compatible:
+    const: amd,ccp-seattle-v1a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+  iommus:
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@e0100000 {
+        compatible = "amd,ccp-seattle-v1a";
+        reg = <0xe0100000 0x10000>;
+        interrupts = <0 3 4>;
+        dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/amd-ccp.txt b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
deleted file mode 100644
index d87579d63da6..000000000000
--- a/Documentation/devicetree/bindings/crypto/amd-ccp.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* AMD Cryptographic Coprocessor driver (ccp)
-
-Required properties:
-- compatible: Should be "amd,ccp-seattle-v1a"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the CCP interrupt
-
-Optional properties:
-- dma-coherent: Present if dma operations are coherent
-
-Example:
-	ccp@e0100000 {
-		compatible = "amd,ccp-seattle-v1a";
-		reg = <0 0xe0100000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 3 4>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index ecf98a9e72b2..948e11ebe4ee 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -19,8 +19,8 @@ properties:
 
   interrupts:
     items:
-      - description: "Interrupt for flow 0"
-      - description: "Interrupt for flow 1"
+      - description: Interrupt for flow 0
+      - description: Interrupt for flow 1
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
deleted file mode 100644
index d9cca4875bd6..000000000000
--- a/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Axis crypto engine with PDMA interface.
-
-Required properties:
-- compatible : Should be one of the following strings:
-	"axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC
-	"axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC.
-- reg: Base address and size for the PDMA register area.
-- interrupts: Interrupt handle for the PDMA interrupt line.
-
-Example:
-
-crypto@f4264000 {
-	compatible = "axis,artpec6-crypto";
-	reg = <0xf4264000 0x1000>;
-	interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
new file mode 100644
index 000000000000..a772d232de09
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED HACE hash and crypto Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |
+  The Hash and Crypto Engine (HACE) is designed to accelerate the throughput
+  of hash data digest, encryption, and decryption. Basically, HACE can be
+  divided into two independently engines - Hash Engine and Crypto Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-hace
+      - aspeed,ast2600-hace
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    hace: crypto@1e6d0000 {
+        compatible = "aspeed,ast2600-hace";
+        reg = <0x1e6d0000 0x200>;
+        interrupts = <4>;
+        clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+        resets = <&syscon ASPEED_RESET_HACE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
new file mode 100644
index 000000000000..b18f178aac06
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description:
+  The ACRY ECDSA/RSA engines is designed to accelerate the throughput
+  of ECDSA/RSA signature and verification. Basically, ACRY can be
+  divided into two independent engines - ECC Engine and RSA Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-acry
+
+  reg:
+    items:
+      - description: acry base address & size
+      - description: acry sram base address & size
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    acry: crypto@1e6fa000 {
+        compatible = "aspeed,ast2600-acry";
+        reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+        interrupts = <160>;
+        clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
new file mode 100644
index 000000000000..19010f90198a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91sam9g46-aes
+      - items:
+          - enum:
+              - microchip,sam9x7-aes
+              - microchip,sama7d65-aes
+          - const: atmel,at91sam9g46-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: aes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    aes: crypto@e1810000 {
+      compatible = "atmel,at91sam9g46-aes";
+      reg = <0xe1810000 0x100>;
+      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+      clock-names = "aes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+             <&dma0 AT91_XDMAC_DT_PERID(2)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
new file mode 100644
index 000000000000..39e076b275b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91sam9g46-sha
+      - items:
+          - enum:
+              - microchip,sam9x7-sha
+              - microchip,sama7d65-sha
+          - const: atmel,at91sam9g46-sha
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sha_clk
+
+  dmas:
+    maxItems: 1
+    description: TX DMA Channel
+
+  dma-names:
+    const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    sha: crypto@e1814000 {
+      compatible = "atmel,at91sam9g46-sha";
+      reg = <0xe1814000 0x100>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+      clock-names = "sha_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
new file mode 100644
index 000000000000..6f16008c4251
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91sam9g46-tdes
+      - items:
+          - enum:
+              - microchip,sam9x7-tdes
+              - microchip,sama7d65-tdes
+          - const: atmel,at91sam9g46-tdes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tdes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    tdes: crypto@e2014000 {
+      compatible = "atmel,at91sam9g46-tdes";
+      reg = <0xe2014000 0x100>;
+      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+      clock-names = "tdes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+             <&dma0 AT91_XDMAC_DT_PERID(53)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
deleted file mode 100644
index f2aab3dc2b52..000000000000
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Atmel HW cryptographic accelerators
-
-These are the HW cryptographic accelerators found on some Atmel products.
-
-* Advanced Encryption Standard (AES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-aes".
-- reg: Should contain AES registers location and length.
-- interrupts: Should contain the IRQ line for the AES.
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-aes@f8038000 {
-	compatible = "atmel,at91sam9g46-aes";
-	reg = <0xf8038000 0x100>;
-	interrupts = <43 4 0>;
-	dmas = <&dma1 2 18>,
-	       <&dma1 2 19>;
-	dma-names = "tx", "rx";
-
-* Triple Data Encryption Standard (Triple DES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-tdes".
-- reg: Should contain TDES registers location and length.
-- interrupts: Should contain the IRQ line for the TDES.
-
-Optional properties:
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-tdes@f803c000 {
-	compatible = "atmel,at91sam9g46-tdes";
-	reg = <0xf803c000 0x100>;
-	interrupts = <44 4 0>;
-	dmas = <&dma1 2 20>,
-	       <&dma1 2 21>;
-	dma-names = "tx", "rx";
-};
-
-* Secure Hash Algorithm (SHA)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-sha".
-- reg: Should contain SHA registers location and length.
-- interrupts: Should contain the IRQ line for the SHA.
-
-Optional properties:
-- dmas: One DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property. Only one "tx" string needed.
-
-Example:
-sha@f8034000 {
-	compatible = "atmel,at91sam9g46-sha";
-	reg = <0xf8034000 0x100>;
-	interrupts = <42 4 0>;
-	dmas = <&dma1 2 17>;
-	dma-names = "tx";
-};
diff --git a/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml b/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml
new file mode 100644
index 000000000000..c91f81e3c39e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/axis,artpec6-crypto.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/axis,artpec6-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC6 crypto engine with PDMA interface
+
+maintainers:
+  - Lars Persson <lars.persson@axis.com>
+
+properties:
+  compatible:
+    enum:
+      - axis,artpec6-crypto
+      - axis,artpec7-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    crypto@f4264000 {
+        compatible = "axis,artpec6-crypto";
+        reg = <0xf4264000 0x1000>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
deleted file mode 100644
index 29b6007568eb..000000000000
--- a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-The Broadcom Secure Processing Unit (SPU) hardware supports symmetric
-cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware
-blocks.
-
-Required properties:
-- compatible: Should be one of the following:
-  brcm,spum-crypto - for devices with SPU-M hardware
-  brcm,spu2-crypto - for devices with SPU2 hardware
-  brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3
-  and Rabin Fingerprint support
-  brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware
-
-- reg: Should contain SPU registers location and length.
-- mboxes: The mailbox channel to be used to communicate with the SPU.
-  Mailbox channels correspond to DMA rings on the device.
-
-Example:
-	crypto@612d0000 {
-		compatible = "brcm,spum-crypto";
-		reg = <0 0x612d0000 0 0x900>;
-		mboxes = <&pdc0 0>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml b/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml
new file mode 100644
index 000000000000..9a5fb61727fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/brcm,spum-crypto.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/brcm,spum-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SPU Crypto Offload
+
+maintainers:
+  - Rob Rice <rob.rice@broadcom.com>
+
+description:
+  The Broadcom Secure Processing Unit (SPU) hardware supports symmetric
+  cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware
+  blocks.
+
+properties:
+  compatible:
+    enum:
+      - brcm,spum-crypto
+      - brcm,spu2-crypto
+      - brcm,spu2-v2-crypto     # enhanced SPU2 hardware features like SHA3 and Rabin Fingerprint support
+      - brcm,spum-nsp-crypto    # Northstar Plus variant of the SPU-M hardware
+
+  reg:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@612d0000 {
+        compatible = "brcm,spum-crypto";
+        reg = <0x612d0000 0x900>;
+        mboxes = <&pdc0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
new file mode 100644
index 000000000000..9f8e6689cd94
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Non-Volatile Storage (SNVS)
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description:
+  Node defines address range and the associated interrupt for the SNVS function.
+  This function monitors security state information & reports security
+  violations. This also included rtc, system power off and ON/OFF key.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,sec-v4.0-mon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+      - items:
+          - enum:
+              - fsl,sec-v5.3-mon
+              - fsl,sec-v5.4-mon
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  snvs-rtc-lp:
+    type: object
+    additionalProperties: false
+    description:
+      Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-mon-rtc-lp
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-rtc
+
+      interrupts:
+        # VFxxx has only one. What is the 2nd one?
+        minItems: 1
+        maxItems: 2
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      offset:
+        description: LP register offset
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0x34
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-powerkey:
+    type: object
+    additionalProperties: false
+    description:
+      The snvs-pwrkey is designed to enable POWER key function which controlled
+      by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+      system if pressed after system suspend.
+
+    $ref: /schemas/input/input.yaml
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-pwrkey
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      wakeup-source: true
+
+      linux,keycode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 116
+        deprecated: true
+
+      linux,keycodes:
+        maxItems: 1
+        default: 116
+
+      power-off-time-sec:
+        enum: [0, 5, 10, 15]
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-lpgpr:
+    $ref: /schemas/nvmem/snvs-lpgpr.yaml#
+
+  snvs-poweroff:
+    description:
+      The SNVS could drive signal to PMIC to turn off system power by setting
+      SNVS_LP LPCR register.
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+
+    sec_mon: sec-mon@314000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x314000 0x1000>;
+
+        snvs-rtc-lp {
+            compatible = "fsl,sec-v4.0-mon-rtc-lp";
+            regmap = <&sec_mon>;
+            offset = <0x34>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-rtc";
+            interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        snvs-powerkey {
+            compatible = "fsl,sec-v4.0-pwrkey";
+            regmap = <&sec_mon>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-pwrkey";
+            interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+            linux,keycode = <116>; /* KEY_POWER */
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
new file mode 100644
index 000000000000..dcc755d2709a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SEC 4
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description: |
+  NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+  Accelerator and Assurance Module (CAAM).
+
+  SEC 4 h/w can process requests from 2 types of sources.
+  1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+  2. Job Rings (HW interface between cores & SEC 4 registers).
+
+  High Speed Data Path Configuration:
+
+  HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+  such as the P4080.  The number of simultaneous dequeues the QI can make is
+  equal to the number of Descriptor Controller (DECO) engines in a particular
+  SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+  dequeue from 5 subportals simultaneously.
+
+  Job Ring Data Path Configuration:
+
+  Each JR is located on a separate 4k page, they may (or may not) be made visible
+  in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+  up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,sec-v5.4
+              - fsl,sec-v6.0
+          - const: fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - items:
+          - enum:
+              - fsl,imx6ul-caam
+              - fsl,imx8qm-caam
+              - fsl,imx8qxp-caam
+              - fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - const: fsl,sec-v4.0
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [mem, aclk, ipg, emi_slow]
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  fsl,sec-era:
+    description: Defines the 'ERA' of the SEC device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  '^jr@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Job Ring (JR) Node. Defines data processing interface to SEC 4 across the
+      peripheral bus for purposes of processing cryptographic descriptors. The
+      specified address range can be made visible to one (or more) cores. The
+      interrupt defined for this node is controlled within the address range of
+      this node.
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v6.0-job-ring
+              - const: fsl,sec-v5.2-job-ring
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.4-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - items:
+              - const: fsl,sec-v5.4-job-ring
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - items:
+              - enum:
+                  - fsl,imx8qm-job-ring
+                  - fsl,imx8qxp-job-ring
+                  - fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - const: fsl,sec-v4.0-job-ring
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      fsl,liodn:
+        description:
+          Specifies the LIODN to be used in conjunction with the ppid-to-liodn
+          table that specifies the PPID to LIODN mapping. Needed if the PAMU is
+          used.  Value is a 12 bit value where value is a LIODN ID for this JR.
+          This property is normally set by boot firmware.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - maximum: 0xfff
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - fsl,imx8qm-job-ring
+                  - fsl,imx8qxp-job-ring
+        then:
+          required:
+            - power-domains
+        else:
+          properties:
+            power-domains: false
+
+  '^rtic@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Run Time Integrity Check (RTIC) Node. Defines a register space that
+      contains up to 5 sets of addresses and their lengths (sizes) that will be
+      checked at run time.  After an initial hash result is calculated, these
+      addresses are checked by HW to monitor any change.  If any memory is
+      modified, a Security Violation is triggered (see SNVS definition).
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v5.4-rtic
+              - const: fsl,sec-v5.0-rtic
+              - const: fsl,sec-v4.0-rtic
+          - const: fsl,sec-v4.0-rtic
+
+      reg:
+        items:
+          - description: RTIC control and status register space.
+          - description: RTIC recoverable error indication register space.
+        minItems: 1
+
+      ranges:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      '^rtic-[a-z]@[0-9a-f]+$':
+        type: object
+        additionalProperties: false
+        description:
+          Run Time Integrity Check (RTIC) Memory Node defines individual RTIC
+          memory regions that are used to perform run-time integrity check of
+          memory areas that should not modified. The node defines a register
+          that contains the memory address & length (combined) and a second
+          register that contains the hash result in big endian format.
+
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                  - const: fsl,sec-v5.4-rtic-memory
+                  - const: fsl,sec-v5.0-rtic-memory
+                  - const: fsl,sec-v4.0-rtic-memory
+              - const: fsl,sec-v4.0-rtic-memory
+
+          reg:
+            items:
+              - description: RTIC memory address
+              - description: RTIC hash result
+
+          fsl,liodn:
+            description:
+              Specifies the LIODN to be used in conjunction with the
+              ppid-to-liodn table that specifies the PPID to LIODN mapping.
+              Needed if the PAMU is used.  Value is a 12 bit value where value
+              is a LIODN ID for this JR. This property is normally set by boot
+              firmware.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - maximum: 0xfff
+
+          fsl,rtic-region:
+            description:
+              Specifies the HW address (36 bit address) for this region
+              followed by the length of the HW partition to be checked;
+              the address is represented as a 64 bit quantity followed
+              by a 32 bit length.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qm-caam
+          - fsl,imx8qxp-caam
+then:
+  required:
+    - power-domains
+else:
+  properties:
+    power-domains: false
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@300000 {
+        compatible = "fsl,sec-v4.0";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x300000 0x10000>;
+        ranges = <0 0x300000 0x10000>;
+        interrupts = <92 2>;
+
+        jr@1000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x1000 0x1000>;
+            interrupts = <88 2>;
+        };
+
+        jr@2000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x2000 0x1000>;
+            interrupts = <89 2>;
+        };
+
+        jr@3000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x3000 0x1000>;
+            interrupts = <90 2>;
+        };
+
+        jr@4000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x4000 0x1000>;
+            interrupts = <91 2>;
+        };
+
+        rtic@6000 {
+            compatible = "fsl,sec-v4.0-rtic";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x6000 0x100>;
+            ranges = <0x0 0x6100 0xe00>;
+
+            rtic-a@0 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x00 0x20>, <0x100 0x80>;
+            };
+
+            rtic-b@20 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x20 0x20>, <0x200 0x80>;
+            };
+
+            rtic-c@40 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x40 0x20>, <0x300 0x80>;
+            };
+
+            rtic-d@60 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x60 0x20>, <0x500 0x80>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml
new file mode 100644
index 000000000000..2091b89bb726
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec2.0.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SoC SEC Security Engines versions 1.x-2.x-3.x
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+properties:
+  compatible:
+    description:
+      Should contain entries for this and backward compatible SEC versions,
+      high to low. Warning - SEC1 and SEC2 are mutually exclusive.
+    oneOf:
+      - items:
+          - const: fsl,sec3.3
+          - const: fsl,sec3.1
+          - const: fsl,sec3.0
+          - const: fsl,sec2.4
+          - const: fsl,sec2.2
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec3.1
+          - const: fsl,sec3.0
+          - const: fsl,sec2.4
+          - const: fsl,sec2.2
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec3.0
+          - const: fsl,sec2.4
+          - const: fsl,sec2.2
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec2.4
+          - const: fsl,sec2.2
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec2.2
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec2.1
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec2.0
+      - items:
+          - const: fsl,sec1.2
+          - const: fsl,sec1.0
+      - items:
+          - const: fsl,sec1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 4 ]
+    description: An integer representing the number of channels available.
+
+  fsl,channel-fifo-len:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100
+    description:
+      An integer representing the number of descriptor pointers each channel
+      fetch fifo can hold.
+
+  fsl,exec-units-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xfff
+    description: |
+      The bitmask representing what execution units (EUs) are available.
+      EU information should be encoded following the SEC's Descriptor Header
+      Dword EU_SEL0 field documentation, i.e. as follows:
+
+        bit 0  = reserved - should be 0
+        bit 1  = set if SEC has the ARC4 EU (AFEU)
+        bit 2  = set if SEC has the DES/3DES EU (DEU)
+        bit 3  = set if SEC has the message digest EU (MDEU/MDEU-A)
+        bit 4  = set if SEC has the random number generator EU (RNG)
+        bit 5  = set if SEC has the public key EU (PKEU)
+        bit 6  = set if SEC has the AES EU (AESU)
+        bit 7  = set if SEC has the Kasumi EU (KEU)
+        bit 8  = set if SEC has the CRC EU (CRCU)
+        bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
+
+      remaining bits are reserved for future SEC EUs.
+
+  fsl,descriptor-types-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The bitmask representing what descriptors are available. Descriptor type
+      information should be encoded following the SEC's Descriptor Header Dword
+      DESC_TYPE field documentation, i.e. as follows:
+
+        bit 0  = SEC supports descriptor type aesu_ctr_nonsnoop
+        bit 1  = SEC supports descriptor type ipsec_esp
+        bit 2  = SEC supports descriptor type common_nonsnoop
+        bit 3  = SEC supports descriptor type 802.11i AES ccmp
+        bit 4  = SEC supports descriptor type hmac_snoop_no_afeu
+        bit 5  = SEC supports descriptor type srtp
+        bit 6  = SEC supports descriptor type non_hmac_snoop_no_afeu
+        bit 7  = SEC supports descriptor type pkeu_assemble
+        bit 8  = SEC supports descriptor type aesu_key_expand_output
+        bit 9  = SEC supports descriptor type pkeu_ptmul
+        bit 10 = SEC supports descriptor type common_nonsnoop_afeu
+        bit 11 = SEC supports descriptor type pkeu_ptadd_dbl
+
+      ..and so on and so forth.
+
+required:
+  - compatible
+  - reg
+  - fsl,num-channels
+  - fsl,channel-fifo-len
+  - fsl,exec-units-mask
+  - fsl,descriptor-types-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* MPC8548E */
+    crypto@30000 {
+        compatible = "fsl,sec2.1", "fsl,sec2.0";
+        reg = <0x30000 0x10000>;
+        interrupts = <29 2>;
+        interrupt-parent = <&mpic>;
+        fsl,num-channels = <4>;
+        fsl,channel-fifo-len = <24>;
+        fsl,exec-units-mask = <0xfe>;
+        fsl,descriptor-types-mask = <0x12b0ebf>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
index 99be01539fcd..8dd36c2f76fd 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -11,9 +11,15 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-dcp
-      - fsl,imx28-dcp
+    oneOf:
+      - enum:
+          - fsl,imx23-dcp
+          - fsl,imx28-dcp
+      - items:
+          - enum:
+              - fsl,imx6sl-dcp
+              - fsl,imx6ull-dcp
+          - const: fsl,imx28-dcp
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
index d531f3af3ea4..41df80bcdcd9 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips
+title: Freescale SAHARA Cryptographic Accelerator
 
 maintainers:
   - Steffen Trumtrar <s.trumtrar@pengutronix.de>
@@ -19,19 +19,56 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: SAHARA Interrupt for Host 0
+      - description: SAHARA Interrupt for Host 1
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Sahara IPG clock
+      - description: Sahara AHB clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
 
 required:
   - compatible
   - reg
   - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx53-sahara
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
 
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
     crypto@10025000 {
         compatible = "fsl,imx27-sahara";
-        reg = < 0x10025000 0x800>;
+        reg = <0x10025000 0x800>;
         interrupts = <75>;
+        clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+                 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
+        clock-names = "ipg", "ahb";
     };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
deleted file mode 100644
index 125f155d00d0..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Freescale SoC SEC Security Engines versions 1.x-2.x-3.x
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3)
-                             e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1)
-    warning: SEC1 and SEC2 are mutually exclusive
-- reg : Offset and length of the register set for the device
-- interrupts : the SEC's interrupt number
-- fsl,num-channels : An integer representing the number of channels
-  available.
-- fsl,channel-fifo-len : An integer representing the number of
-  descriptor pointers each channel fetch fifo can hold.
-- fsl,exec-units-mask : The bitmask representing what execution units
-  (EUs) are available. It's a single 32-bit cell. EU information
-  should be encoded following the SEC's Descriptor Header Dword
-  EU_SEL0 field documentation, i.e. as follows:
-
-	bit 0  = reserved - should be 0
-	bit 1  = set if SEC has the ARC4 EU (AFEU)
-	bit 2  = set if SEC has the DES/3DES EU (DEU)
-	bit 3  = set if SEC has the message digest EU (MDEU/MDEU-A)
-	bit 4  = set if SEC has the random number generator EU (RNG)
-	bit 5  = set if SEC has the public key EU (PKEU)
-	bit 6  = set if SEC has the AES EU (AESU)
-	bit 7  = set if SEC has the Kasumi EU (KEU)
-	bit 8  = set if SEC has the CRC EU (CRCU)
-	bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
-
-remaining bits are reserved for future SEC EUs.
-
-- fsl,descriptor-types-mask : The bitmask representing what descriptors
-  are available. It's a single 32-bit cell. Descriptor type information
-  should be encoded following the SEC's Descriptor Header Dword DESC_TYPE
-  field documentation, i.e. as follows:
-
-	bit 0  = set if SEC supports the aesu_ctr_nonsnoop desc. type
-	bit 1  = set if SEC supports the ipsec_esp descriptor type
-	bit 2  = set if SEC supports the common_nonsnoop desc. type
-	bit 3  = set if SEC supports the 802.11i AES ccmp desc. type
-	bit 4  = set if SEC supports the hmac_snoop_no_afeu desc. type
-	bit 5  = set if SEC supports the srtp descriptor type
-	bit 6  = set if SEC supports the non_hmac_snoop_no_afeu desc.type
-	bit 7  = set if SEC supports the pkeu_assemble descriptor type
-	bit 8  = set if SEC supports the aesu_key_expand_output desc.type
-	bit 9  = set if SEC supports the pkeu_ptmul descriptor type
-	bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
-	bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
-
-  ..and so on and so forth.
-
-Example:
-
-	/* MPC8548E */
-	crypto@30000 {
-		compatible = "fsl,sec2.1", "fsl,sec2.0";
-		reg = <0x30000 0x10000>;
-		interrupts = <29 2>;
-		interrupt-parent = <&mpic>;
-		fsl,num-channels = <4>;
-		fsl,channel-fifo-len = <24>;
-		fsl,exec-units-mask = <0xfe>;
-		fsl,descriptor-types-mask = <0x12b0ebf>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
deleted file mode 100644
index 8f359f473ada..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ /dev/null
@@ -1,553 +0,0 @@
-=====================================================================
-SEC 4 Device Tree Binding
-Copyright (C) 2008-2011 Freescale Semiconductor Inc.
-
- CONTENTS
-   -Overview
-   -SEC 4 Node
-   -Job Ring Node
-   -Run Time Integrity Check (RTIC) Node
-   -Run Time Integrity Check (RTIC) Memory Node
-   -Secure Non-Volatile Storage (SNVS) Node
-   -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-   -Full Example
-
-NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
-Accelerator and Assurance Module (CAAM).
-
-=====================================================================
-Overview
-
-DESCRIPTION
-
-SEC 4 h/w can process requests from 2 types of sources.
-1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
-2. Job Rings (HW interface between cores & SEC 4 registers).
-
-High Speed Data Path Configuration:
-
-HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
-such as the P4080.  The number of simultaneous dequeues the QI can make is
-equal to the number of Descriptor Controller (DECO) engines in a particular
-SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
-dequeue from 5 subportals simultaneously.
-
-Job Ring Data Path Configuration:
-
-Each JR is located on a separate 4k page, they may (or may not) be made visible
-in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
-up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
-
-=====================================================================
-SEC 4 Node
-
-Description
-
-    Node defines the base address of the SEC 4 block.
-    This block specifies the address range of all global
-    configuration registers for the SEC 4 block.  It
-    also receives interrupts from the Run Time Integrity Check
-    (RTIC) function within the SEC 4 block.
-
-PROPERTIES
-
-   - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0"
-
-   - fsl,sec-era
-      Usage: optional
-      Value type: <u32>
-      Definition: A standard property. Define the 'ERA' of the SEC
-          device.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.
-
-   - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC4 configuration registers.
-          registers
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 4.0 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-   - clocks
-      Usage: required if SEC 4.0 requires explicit enablement of clocks
-      Value type: <prop_encoded-array>
-      Definition:  A list of phandle and clock specifier pairs describing
-          the clocks required for enabling and disabling SEC 4.0.
-
-   - clock-names
-      Usage: required if SEC 4.0 requires explicit enablement of clocks
-      Value type: <string>
-      Definition: A list of clock name strings in the same order as the
-          clocks property.
-
-   Note: All other standard properties (see the Devicetree Specification)
-   are allowed but are optional.
-
-
-EXAMPLE
-
-iMX6QDL/SX requires four clocks
-
-	crypto@300000 {
-		compatible = "fsl,sec-v4.0";
-		fsl,sec-era = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x300000 0x10000>;
-		ranges = <0 0x300000 0x10000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <92 2>;
-		clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
-			 <&clks IMX6QDL_CLK_CAAM_ACLK>,
-			 <&clks IMX6QDL_CLK_CAAM_IPG>,
-			 <&clks IMX6QDL_CLK_EIM_SLOW>;
-		clock-names = "mem", "aclk", "ipg", "emi_slow";
-	};
-
-
-iMX6UL does only require three clocks
-
-	crypto: crypto@2140000 {
-		compatible = "fsl,sec-v4.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x2140000 0x3c000>;
-		ranges = <0 0x2140000 0x3c000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
-			 <&clks IMX6UL_CLK_CAAM_ACLK>,
-			 <&clks IMX6UL_CLK_CAAM_IPG>;
-		clock-names = "mem", "aclk", "ipg";
-	};
-
-=====================================================================
-Job Ring (JR) Node
-
-    Child of the crypto node defines data processing interface to SEC 4
-    across the peripheral bus for purposes of processing
-    cryptographic descriptors. The specified address
-    range can be made visible to one (or more) cores.
-    The interrupt defined for this node is controlled within
-    the address range of this node.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-job-ring"
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: Specifies a two JR parameters:  an offset from
-          the parent physical address and the length the JR registers.
-
-   - fsl,liodn
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the LIODN to be used in conjunction with
-           the ppid-to-liodn table that specifies the PPID to LIODN mapping.
-           Needed if the PAMU is used.  Value is a 12 bit value
-           where value is a LIODN ID for this JR. This property is
-           normally set by boot firmware.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	jr@1000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		fsl,liodn = <0x081>;
-		interrupt-parent = <&mpic>;
-		interrupts = <88 2>;
-	};
-
-
-=====================================================================
-Run Time Integrity Check (RTIC) Node
-
-  Child node of the crypto node.  Defines a register space that
-  contains up to 5 sets of addresses and their lengths (sizes) that
-  will be checked at run time.  After an initial hash result is
-  calculated, these addresses are checked by HW to monitor any
-  change.  If any memory is modified, a Security Violation is
-  triggered (see SNVS definition).
-
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-rtic".
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.  Must
-           have a value of 1.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.  Must have a value of 1.
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies a two parameters:
-          an offset from the parent physical address and the length
-          the SEC4 registers.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 4 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-EXAMPLE
-	rtic@6000 {
-		compatible = "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-	};
-
-=====================================================================
-Run Time Integrity Check (RTIC) Memory Node
-  A child node that defines individual RTIC memory regions that are used to
-  perform run-time integrity check of memory areas that should not modified.
-  The node defines a register that contains the memory address &
-  length (combined) and a second register that contains the hash result
-  in big endian format.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-rtic-memory".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies two parameters:
-          an offset from the parent physical address and the length:
-
-          1. The location of the RTIC memory address & length registers.
-          2. The location RTIC hash result.
-
-  - fsl,rtic-region
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the HW address (36 bit address) for this region
-           followed by the length of the HW partition to be checked;
-           the address is represented as a 64 bit quantity followed
-           by a 32 bit length.
-
-   - fsl,liodn
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the LIODN to be used in conjunction with
-           the ppid-to-liodn table that specifies the PPID to LIODN
-           mapping.  Needed if the PAMU is used.  Value is a 12 bit value
-           where value is a LIODN ID for this RTIC memory region. This
-           property is normally set by boot firmware.
-
-EXAMPLE
-	rtic-a@0 {
-		compatible = "fsl,sec-v4.0-rtic-memory";
-		reg = <0x00 0x20 0x100 0x80>;
-		fsl,liodn   = <0x03c>;
-		fsl,rtic-region  = <0x12345678 0x12345678 0x12345678>;
-	};
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Node
-
-    Node defines address range and the associated
-    interrupt for the SNVS function.  This function
-    monitors security state information & reports
-    security violations. This also included rtc,
-    system power off and ON/OFF key.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC4 configuration
-          registers.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.  Must
-           have a value of 1.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.  Must have a value of 1.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SNVS register space.  A triplet that includes
-           the child address, parent address, & length.
-
-   - interrupts
-      Usage: optional
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon", "syscon";
-		reg = <0x314000 0x1000>;
-		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;
-	};
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-
-  A SNVS child node that defines SNVS LP RTC.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
-
-  - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition: Specifies the interrupts generated by this
-	   device.  The value of the interrupts property
-	   consists of one interrupt specifier. The format
-	   of the specifier is defined by the binding document
-	   describing the node's interrupt parent.
-
- - regmap
-	Usage: required
-	Value type: <phandle>
-	Definition: this is phandle to the register map node.
-
- - offset
-	Usage: option
-	value type: <u32>
-	Definition: LP register offset. default it is 0x34.
-
-   - clocks
-      Usage: optional, required if SNVS LP RTC requires explicit
-          enablement of clocks
-      Value type: <prop_encoded-array>
-      Definition:  a clock specifier describing the clock required for
-          enabling and disabling SNVS LP RTC.
-
-   - clock-names
-      Usage: optional, required if SNVS LP RTC requires explicit
-          enablement of clocks
-      Value type: <string>
-      Definition: clock name string should be "snvs-rtc".
-
-EXAMPLE
-	sec_mon_rtc_lp@1 {
-		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		interrupts = <93 2>;
-		regmap = <&snvs>;
-		offset = <0x34>;
-		clocks = <&clks IMX7D_SNVS_CLK>;
-		clock-names = "snvs-rtc";
-	};
-
-=====================================================================
-System ON/OFF key driver
-
-  The snvs-pwrkey is designed to enable POWER key function which controlled
-  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
-  system if pressed after system suspend.
-
-  - compatible:
-      Usage: required
-      Value type: <string>
-      Definition: Mush include "fsl,sec-v4.0-pwrkey".
-
-  - interrupts:
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
-
-  - linux,keycode:
-      Usage: option
-      Value type: <int>
-      Definition: Keycode to emit, KEY_POWER by default.
-
-  - wakeup-source:
-      Usage: option
-      Value type: <boo>
-      Definition: Button can wake-up the system.
-
- - regmap:
-      Usage: required:
-      Value type: <phandle>
-      Definition: this is phandle to the register map node.
-
-EXAMPLE:
-	snvs-pwrkey@020cc000 {
-		compatible = "fsl,sec-v4.0-pwrkey";
-		regmap = <&snvs>;
-		interrupts = <0 4 0x4>
-	        linux,keycode = <116>; /* KEY_POWER */
-		wakeup-source;
-	};
-
-=====================================================================
-FULL EXAMPLE
-
-	crypto: crypto@300000 {
-		compatible = "fsl,sec-v4.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x300000 0x10000>;
-		ranges = <0 0x300000 0x10000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <92 2>;
-
-		sec_jr0: jr@1000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x1000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <88 2>;
-		};
-
-		sec_jr1: jr@2000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <89 2>;
-		};
-
-		sec_jr2: jr@3000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x3000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <90 2>;
-		};
-
-		sec_jr3: jr@4000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x4000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <91 2>;
-		};
-
-		rtic@6000 {
-			compatible = "fsl,sec-v4.0-rtic";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x6000 0x100>;
-			ranges = <0x0 0x6100 0xe00>;
-
-			rtic_a: rtic-a@0 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x00 0x20 0x100 0x80>;
-			};
-
-			rtic_b: rtic-b@20 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x20 0x20 0x200 0x80>;
-			};
-
-			rtic_c: rtic-c@40 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x40 0x20 0x300 0x80>;
-			};
-
-			rtic_d: rtic-d@60 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x60 0x20 0x500 0x80>;
-			};
-		};
-	};
-
-	sec_mon: sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon";
-		reg = <0x314000 0x1000>;
-		ranges = <0 0x314000 0x1000>;
-
-		sec_mon_rtc_lp@34 {
-			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			regmap = <&sec_mon>;
-			offset = <0x34>;
-			interrupts = <93 2>;
-			clocks = <&clks IMX7D_SNVS_CLK>;
-			clock-names = "snvs-rtc";
-		};
-
-		snvs-pwrkey@020cc000 {
-			compatible = "fsl,sec-v4.0-pwrkey";
-			regmap = <&sec_mon>;
-			interrupts = <0 4 0x4>;
-			linux,keycode = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-=====================================================================
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
deleted file mode 100644
index 73b0eb950bb3..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
-Currently Freescale powerpc chip C29X is embedded with SEC 6.
-SEC 6 device tree binding include:
-   -SEC 6 Node
-   -Job Ring Node
-   -Full Example
-
-=====================================================================
-SEC 6 Node
-
-Description
-
-    Node defines the base address of the SEC 6 block.
-    This block specifies the address range of all global
-    configuration registers for the SEC 6 block.
-    For example, In C293, we could see three SEC 6 node.
-
-PROPERTIES
-
-   - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v6.0".
-
-   - fsl,sec-era
-      Usage: optional
-      Value type: <u32>
-      Definition: A standard property. Define the 'ERA' of the SEC
-          device.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.
-
-   - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC 6 configuration registers.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 6.0 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-   Note: All other standard properties (see the Devicetree Specification)
-   are allowed but are optional.
-
-EXAMPLE
-	crypto@a0000 {
-		compatible = "fsl,sec-v6.0";
-		fsl,sec-era = <6>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xa0000 0x20000>;
-		ranges = <0 0xa0000 0x20000>;
-	};
-
-=====================================================================
-Job Ring (JR) Node
-
-    Child of the crypto node defines data processing interface to SEC 6
-    across the peripheral bus for purposes of processing
-    cryptographic descriptors. The specified address
-    range can be made visible to one (or more) cores.
-    The interrupt defined for this node is controlled within
-    the address range of this node.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v6.0-job-ring".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: Specifies a two JR parameters:  an offset from
-           the parent physical address and the length the JR registers.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	jr@1000 {
-		compatible = "fsl,sec-v6.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <49 2 0 0>;
-	};
-
-===================================================================
-Full Example
-
-Since some chips may contain more than one SEC, the dtsi contains
-only the node contents, not the node itself.  A chip using the SEC
-should include the dtsi inside each SEC node.  Example:
-
-In qoriq-sec6.0.dtsi:
-
-	compatible = "fsl,sec-v6.0";
-	fsl,sec-era = <6>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	jr@1000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x1000 0x1000>;
-	};
-
-	jr@2000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x2000 0x1000>;
-	};
-
-In the C293 device tree, we add the include of public property:
-
-	crypto@a0000 {
-		/include/ "qoriq-sec6.0.dtsi"
-	}
-
-	crypto@a0000 {
-		reg = <0xa0000 0x20000>;
-		ranges = <0 0xa0000 0x20000>;
-
-		jr@1000 {
-			interrupts = <49 2 0 0>;
-		};
-
-		jr@2000 {
-			interrupts = <50 2 0 0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml b/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml
new file mode 100644
index 000000000000..2bfac9d1c020
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/hisilicon,hip06-sec.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/hisilicon,hip06-sec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon hip06/hip07 Security Accelerator
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hip06-sec
+      - hisilicon,hip07-sec
+
+  reg:
+    items:
+      - description: Registers for backend processing engines
+      - description: Registers for common functionality
+      - description: Registers for queue 0
+      - description: Registers for queue 1
+      - description: Registers for queue 2
+      - description: Registers for queue 3
+      - description: Registers for queue 4
+      - description: Registers for queue 5
+      - description: Registers for queue 6
+      - description: Registers for queue 7
+      - description: Registers for queue 8
+      - description: Registers for queue 9
+      - description: Registers for queue 10
+      - description: Registers for queue 11
+      - description: Registers for queue 12
+      - description: Registers for queue 13
+      - description: Registers for queue 14
+      - description: Registers for queue 15
+
+  interrupts:
+    items:
+      - description: SEC unit error queue interrupt
+      - description: Completion interrupt for queue 0
+      - description: Error interrupt for queue 0
+      - description: Completion interrupt for queue 1
+      - description: Error interrupt for queue 1
+      - description: Completion interrupt for queue 2
+      - description: Error interrupt for queue 2
+      - description: Completion interrupt for queue 3
+      - description: Error interrupt for queue 3
+      - description: Completion interrupt for queue 4
+      - description: Error interrupt for queue 4
+      - description: Completion interrupt for queue 5
+      - description: Error interrupt for queue 5
+      - description: Completion interrupt for queue 6
+      - description: Error interrupt for queue 6
+      - description: Completion interrupt for queue 7
+      - description: Error interrupt for queue 7
+      - description: Completion interrupt for queue 8
+      - description: Error interrupt for queue 8
+      - description: Completion interrupt for queue 9
+      - description: Error interrupt for queue 9
+      - description: Completion interrupt for queue 10
+      - description: Error interrupt for queue 10
+      - description: Completion interrupt for queue 11
+      - description: Error interrupt for queue 11
+      - description: Completion interrupt for queue 12
+      - description: Error interrupt for queue 12
+      - description: Completion interrupt for queue 13
+      - description: Error interrupt for queue 13
+      - description: Completion interrupt for queue 14
+      - description: Error interrupt for queue 14
+      - description: Completion interrupt for queue 15
+      - description: Error interrupt for queue 15
+
+  dma-coherent: true
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dma-coherent
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        crypto@400d2000000 {
+            compatible = "hisilicon,hip07-sec";
+            reg = <0x400 0xd0000000 0x0 0x10000
+                  0x400 0xd2000000 0x0 0x10000
+                  0x400 0xd2010000 0x0 0x10000
+                  0x400 0xd2020000 0x0 0x10000
+                  0x400 0xd2030000 0x0 0x10000
+                  0x400 0xd2040000 0x0 0x10000
+                  0x400 0xd2050000 0x0 0x10000
+                  0x400 0xd2060000 0x0 0x10000
+                  0x400 0xd2070000 0x0 0x10000
+                  0x400 0xd2080000 0x0 0x10000
+                  0x400 0xd2090000 0x0 0x10000
+                  0x400 0xd20a0000 0x0 0x10000
+                  0x400 0xd20b0000 0x0 0x10000
+                  0x400 0xd20c0000 0x0 0x10000
+                  0x400 0xd20d0000 0x0 0x10000
+                  0x400 0xd20e0000 0x0 0x10000
+                  0x400 0xd20f0000 0x0 0x10000
+                  0x400 0xd2100000 0x0 0x10000>;
+            interrupts = <576 4>,
+                        <577 1>, <578 4>,
+                        <579 1>, <580 4>,
+                        <581 1>, <582 4>,
+                        <583 1>, <584 4>,
+                        <585 1>, <586 4>,
+                        <587 1>, <588 4>,
+                        <589 1>, <590 4>,
+                        <591 1>, <592 4>,
+                        <593 1>, <594 4>,
+                        <595 1>, <596 4>,
+                        <597 1>, <598 4>,
+                        <599 1>, <600 4>,
+                        <601 1>, <602 4>,
+                        <603 1>, <604 4>,
+                        <605 1>, <606 4>,
+                        <607 1>, <608 4>;
+            dma-coherent;
+            iommus = <&p1_smmu_alg_a 0x600>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
deleted file mode 100644
index d28fd1af01b4..000000000000
--- a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Hisilicon hip07 Security Accelerator (SEC)
-
-Required properties:
-- compatible: Must contain one of
-  - "hisilicon,hip06-sec"
-  - "hisilicon,hip07-sec"
-- reg: Memory addresses and lengths of the memory regions through which
-  this device is controlled.
-  Region 0 has registers to control the backend processing engines.
-  Region 1 has registers for functionality common to all queues.
-  Regions 2-18 have registers for the 16 individual queues which are isolated
-  both in hardware and within the driver.
-- interrupts: Interrupt specifiers.
-  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
-  bindings.
-  Interrupt 0 is for the SEC unit error queue.
-  Interrupt 2N + 1 is the completion interrupt for queue N.
-  Interrupt 2N + 2 is the error interrupt for queue N.
-- dma-coherent:  The driver assumes coherent dma is possible.
-
-Optional properties:
-- iommus: The SEC units are behind smmu-v3 iommus.
-  Refer to iommu/arm,smmu-v3.txt for more information.
-
-Example:
-
-p1_sec_a: crypto@400d2000000 {
-	compatible = "hisilicon,hip07-sec";
-	reg = <0x400 0xd0000000 0x0 0x10000
-	       0x400 0xd2000000 0x0 0x10000
-	       0x400 0xd2010000 0x0 0x10000
-	       0x400 0xd2020000 0x0 0x10000
-	       0x400 0xd2030000 0x0 0x10000
-	       0x400 0xd2040000 0x0 0x10000
-	       0x400 0xd2050000 0x0 0x10000
-	       0x400 0xd2060000 0x0 0x10000
-	       0x400 0xd2070000 0x0 0x10000
-	       0x400 0xd2080000 0x0 0x10000
-	       0x400 0xd2090000 0x0 0x10000
-	       0x400 0xd20a0000 0x0 0x10000
-	       0x400 0xd20b0000 0x0 0x10000
-	       0x400 0xd20c0000 0x0 0x10000
-	       0x400 0xd20d0000 0x0 0x10000
-	       0x400 0xd20e0000 0x0 0x10000
-	       0x400 0xd20f0000 0x0 0x10000
-	       0x400 0xd2100000 0x0 0x10000>;
-	interrupt-parent = <&p1_mbigen_sec_a>;
-	iommus = <&p1_smmu_alg_a 0x600>;
-	dma-coherent;
-	interrupts = <576 4>,
-		     <577 1>, <578 4>,
-		     <579 1>, <580 4>,
-		     <581 1>, <582 4>,
-		     <583 1>, <584 4>,
-		     <585 1>, <586 4>,
-		     <587 1>, <588 4>,
-		     <589 1>, <590 4>,
-		     <591 1>, <592 4>,
-		     <593 1>, <594 4>,
-		     <595 1>, <596 4>,
-		     <597 1>, <598 4>,
-		     <599 1>, <600 4>,
-		     <601 1>, <602 4>,
-		     <603 1>, <604 4>,
-		     <605 1>, <606 4>,
-		     <607 1>, <608 4>;
-};
diff --git a/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml b/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml
new file mode 100644
index 000000000000..46617561ef94
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/img,hash-accelerator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/img,hash-accelerator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies hardware hash accelerator
+
+maintainers:
+  - James Hartley <james.hartley@imgtec.com>
+
+description:
+  The hash accelerator provides hardware hashing acceleration for
+  SHA1, SHA224, SHA256 and MD5 hashes.
+
+properties:
+  compatible:
+    const: img,hash-accelerator
+
+  reg:
+    items:
+      - description: Register base address and size
+      - description: DMA port specifier
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  clocks:
+    items:
+      - description: System clock for hash block registers
+      - description: Hash clock for data path
+
+  clock-names:
+    items:
+      - const: sys
+      - const: hash
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/clock/pistachio-clk.h>
+
+    hash@18149600 {
+        compatible = "img,hash-accelerator";
+        reg = <0x18149600 0x100>, <0x18101100 0x4>;
+        interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma 8 0xffffffff 0>;
+        dma-names = "tx";
+        clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>;
+        clock-names = "sys", "hash";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/img-hash.txt b/Documentation/devicetree/bindings/crypto/img-hash.txt
deleted file mode 100644
index 91a3d757d641..000000000000
--- a/Documentation/devicetree/bindings/crypto/img-hash.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Imagination Technologies hardware hash accelerator
-
-The hash accelerator provides hardware hashing acceleration for
-SHA1, SHA224, SHA256 and MD5 hashes
-
-Required properties:
-
-- compatible : "img,hash-accelerator"
-- reg : Offset and length of the register set for the module, and the DMA port
-- interrupts : The designated IRQ line for the hashing module.
-- dmas : DMA specifier as per Documentation/devicetree/bindings/dma/dma.txt
-- dma-names : Should be "tx"
-- clocks : Clock specifiers
-- clock-names : "sys" Used to clock the hash block registers
-		"hash" Used to clock data through the accelerator
-
-Example:
-
-	hash: hash@18149600 {
-	compatible = "img,hash-accelerator";
-		reg = <0x18149600 0x100>, <0x18101100 0x4>;
-		interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 8 0xffffffff 0>;
-		dma-names = "tx";
-		clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>;
-		clock-names = "sys", "hash";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure,safexcel-eip93.yaml b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel-eip93.yaml
new file mode 100644
index 000000000000..997bf9717f9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel-eip93.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel-eip93.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Inside Secure SafeXcel EIP-93 cryptographic engine
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  The Inside Secure SafeXcel EIP-93 is a cryptographic engine IP block
+  integrated in varios devices with very different and generic name from
+  PKTE to simply vendor+EIP93. The real IP under the hood is actually
+  developed by Inside Secure and given to license to vendors.
+
+  The IP block is sold with different model based on what feature are
+  needed and are identified with the final letter. Each letter correspond
+  to a specific set of feature and multiple letter reflect the sum of the
+  feature set.
+
+  EIP-93 models:
+    - EIP-93i: (basic) DES/Triple DES, AES, PRNG, IPsec ESP, SRTP, SHA1
+    - EIP-93ie: i + SHA224/256, AES-192/256
+    - EIP-93is: i + SSL/DTLS/DTLS, MD5, ARC4
+    - EIP-93ies: i + e + s
+    - EIP-93iw: i + AES-XCB-MAC, AES-CCM
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: airoha,en7581-eip93
+          - const: inside-secure,safexcel-eip93ies
+      - items:
+          - not: {}
+            description: Need a SoC specific compatible
+          - enum:
+              - inside-secure,safexcel-eip93i
+              - inside-secure,safexcel-eip93ie
+              - inside-secure,safexcel-eip93is
+              - inside-secure,safexcel-eip93iw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    crypto@1e004000 {
+      compatible = "airoha,en7581-eip93", "inside-secure,safexcel-eip93ies";
+      reg = <0x1fb70000 0x1000>;
+
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml
new file mode 100644
index 000000000000..343e2d04c797
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Inside Secure SafeXcel cryptographic engine
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: inside-secure,safexcel-eip197b
+      - const: inside-secure,safexcel-eip197d
+      - const: inside-secure,safexcel-eip97ies
+      - const: inside-secure,safexcel-eip197
+        description: Equivalent of inside-secure,safexcel-eip197b
+        deprecated: true
+      - const: inside-secure,safexcel-eip97
+        description: Equivalent of inside-secure,safexcel-eip97ies
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 6
+
+  interrupt-names:
+    items:
+      - const: ring0
+      - const: ring1
+      - const: ring2
+      - const: ring3
+      - const: eip
+      - const: mem
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+  dma-coherent: true
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        clocks:
+          minItems: 2
+    then:
+      properties:
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    crypto@800000 {
+        compatible = "inside-secure,safexcel-eip197b";
+        reg = <0x800000 0x200000>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem";
+        clocks = <&cpm_syscon0 1 26>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
deleted file mode 100644
index 3bbf144c9988..000000000000
--- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Inside Secure SafeXcel cryptographic engine
-
-Required properties:
-- compatible: Should be "inside-secure,safexcel-eip197b",
-	      "inside-secure,safexcel-eip197d" or
-              "inside-secure,safexcel-eip97ies".
-- reg: Base physical address of the engine and length of memory mapped region.
-- interrupts: Interrupt numbers for the rings and engine.
-- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
-
-Optional properties:
-- clocks: Reference to the crypto engine clocks, the second clock is
-          needed for the Armada 7K/8K SoCs.
-- clock-names: mandatory if there is a second clock, in this case the
-               name must be "core" for the first clock and "reg" for
-               the second one.
-
-Backward compatibility:
-Two compatibles are kept for backward compatibility, but shouldn't be used for
-new submissions:
-- "inside-secure,safexcel-eip197" is equivalent to
-  "inside-secure,safexcel-eip197b".
-- "inside-secure,safexcel-eip97" is equivalent to
-  "inside-secure,safexcel-eip97ies".
-
-Example:
-
-	crypto: crypto@800000 {
-		compatible = "inside-secure,safexcel-eip197b";
-		reg = <0x800000 0x200000>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
-				  "eip";
-		clocks = <&cpm_syscon0 1 26>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index 9c53c27bd20a..a4006237aa89 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx cryptographic engine
 
@@ -21,20 +21,29 @@ properties:
     const: intel,ixp4xx-crypto
 
   intel,npe-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
     description: phandle to the NPE this crypto engine is using, the cell
       describing the NPE instance to be used.
 
   queue-rx:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX queue on the NPE, the cell describing
       the queue instance to be used.
 
   queue-txready:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX READY queue on the NPE, the cell describing
       the queue instance to be used.
 
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
index ee2c099981b2..fedd8be56ad6 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS AES Device Tree Bindings
+title: Intel Keem Bay OCS AES
 
 maintainers:
   - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
index a3c16451b1ad..2bb95247b64f 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS ECC Device Tree Bindings
+title: Intel Keem Bay OCS ECC
 
 maintainers:
   - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
index acb92706d280..46e2853ab8f4 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS HCU Device Tree Bindings
+title: Intel Keem Bay OCS HCU
 
 maintainers:
   - Declan Murphy <declan.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml b/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml
new file mode 100644
index 000000000000..b44d36c50ec4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/marvell,orion-crypto.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/marvell,orion-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Cryptographic Engines And Security Accelerator
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+description: |
+  Marvell Cryptographic Engines And Security Accelerator
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-370-crypto
+      - marvell,armada-xp-crypto
+      - marvell,armada-375-crypto
+      - marvell,armada-38x-crypto
+      - marvell,dove-crypto
+      - marvell,kirkwood-crypto
+      - marvell,orion-crypto
+
+  reg:
+    minItems: 1
+    items:
+      - description: Registers region
+      - description: SRAM region
+        deprecated: true
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: regs
+      - const: sram
+        deprecated: true
+
+  interrupts:
+    description: One interrupt for each CESA engine
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    description: One or two clocks for each CESA engine
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: cesa0
+      - const: cesa1
+      - const: cesaz0
+      - const: cesaz1
+
+  marvell,crypto-srams:
+    description: Phandle(s) to crypto SRAM.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+
+  marvell,crypto-sram-size:
+    description: SRAM size reserved for crypto operations.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x800
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - marvell,crypto-srams
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - marvell,kirkwood-crypto
+              - marvell,orion-crypto
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-370-crypto
+              - marvell,armada-375-crypto
+              - marvell,armada-38x-crypto
+              - marvell,armada-xp-crypto
+    then:
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-375-crypto
+              - marvell,armada-38x-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@30000 {
+        compatible = "marvell,orion-crypto";
+        reg = <0x30000 0x10000>;
+        reg-names = "regs";
+        interrupts = <22>;
+        marvell,crypto-srams = <&crypto_sram>;
+        marvell,crypto-sram-size = <0x600>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
deleted file mode 100644
index 28d3f2496b89..000000000000
--- a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Marvell Cryptographic Engines And Security Accelerator
-
-Required properties:
-- compatible: should be one of the following string
-	      "marvell,orion-crypto"
-	      "marvell,kirkwood-crypto"
-	      "marvell,dove-crypto"
-	      "marvell,armada-370-crypto"
-	      "marvell,armada-xp-crypto"
-	      "marvell,armada-375-crypto"
-	      "marvell,armada-38x-crypto"
-- reg: base physical address of the engine and length of memory mapped
-       region. Can also contain an entry for the SRAM attached to the CESA,
-       but this representation is deprecated and marvell,crypto-srams should
-       be used instead
-- reg-names: "regs". Can contain an "sram" entry, but this representation
-	     is deprecated and marvell,crypto-srams should be used instead
-- interrupts: interrupt number
-- clocks: reference to the crypto engines clocks. This property is not
-	  required for orion and kirkwood platforms
-- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine
-	       id.
-	       This property is not required for the orion and kirkwoord
-	       platforms.
-	       "cesazX" clocks are not required on armada-370 platforms
-- marvell,crypto-srams: phandle to crypto SRAM definitions
-
-Optional properties:
-- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
-			    specified the whole SRAM is used (2KB)
-
-
-Examples:
-
-	crypto@90000 {
-		compatible = "marvell,armada-xp-crypto";
-		reg = <0x90000 0x10000>;
-		reg-names = "regs";
-		interrupts = <48>, <49>;
-		clocks = <&gateclk 23>, <&gateclk 23>;
-		clock-names = "cesa0", "cesa1";
-		marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
-		marvell,crypto-sram-size = <0x600>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
deleted file mode 100644
index 450da3661cad..000000000000
--- a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek cryptographic accelerators
-
-Required properties:
-- compatible: Should be "mediatek,eip97-crypto"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the five crypto engines interrupts in numeric
-	order. These are global system and four descriptor rings.
-- clocks: the clock used by the core
-- clock-names: Must contain "cryp".
-- power-domains: Must contain a reference to the PM domain.
-
-
-Example:
-	crypto: crypto@1b240000 {
-		compatible = "mediatek,eip97-crypto";
-		reg = <0 0x1b240000 0 0x20000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
-		clock-names = "cryp";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
deleted file mode 100644
index d9b92e2f3138..000000000000
--- a/Documentation/devicetree/bindings/crypto/mv_cesa.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Marvell Cryptographic Engines And Security Accelerator
-
-Required properties:
-- compatible: should be one of the following string
-	      "marvell,orion-crypto"
-	      "marvell,kirkwood-crypto"
-	      "marvell,dove-crypto"
-- reg: base physical address of the engine and length of memory mapped
-       region. Can also contain an entry for the SRAM attached to the CESA,
-       but this representation is deprecated and marvell,crypto-srams should
-       be used instead
-- reg-names: "regs". Can contain an "sram" entry, but this representation
-	     is deprecated and marvell,crypto-srams should be used instead
-- interrupts: interrupt number
-- clocks: reference to the crypto engines clocks. This property is only
-	  required for Dove platforms
-- marvell,crypto-srams: phandle to crypto SRAM definitions
-
-Optional properties:
-- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
-			    specified the whole SRAM is used (2KB)
-
-Examples:
-
-	crypto@30000 {
-		compatible = "marvell,orion-crypto";
-		reg = <0x30000 0x10000>;
-		reg-names = "regs";
-		interrupts = <22>;
-		marvell,crypto-srams = <&crypto_sram>;
-		marvell,crypto-sram-size = <0x600>;
-	};
diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml
new file mode 100644
index 000000000000..cb47ae2889b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-aes.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for AES algorithms
+
+description:
+  The Tegra Security Engine accelerates the following AES encryption/decryption
+  algorithms - AES-ECB, AES-CBC, AES-OFB, AES-XTS, AES-CTR, AES-GCM, AES-CCM,
+  AES-CMAC
+
+maintainers:
+  - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-se-aes
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/clock/tegra234-clock.h>
+
+    crypto@15820000 {
+        compatible = "nvidia,tegra234-se-aes";
+        reg = <0x15820000 0x10000>;
+        clocks = <&bpmp TEGRA234_CLK_SE>;
+        iommus = <&smmu TEGRA234_SID_SES_SE1>;
+        dma-coherent;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml
new file mode 100644
index 000000000000..f57ef10645e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/nvidia,tegra234-se-hash.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/nvidia,tegra234-se-hash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security Engine for HASH algorithms
+
+description:
+  The Tegra Security HASH Engine accelerates the following HASH functions -
+  SHA1, SHA224, SHA256, SHA384, SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512
+  HMAC(SHA224), HMAC(SHA256), HMAC(SHA384), HMAC(SHA512)
+
+maintainers:
+  - Akhil R <akhilrajeev@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-se-hash
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/clock/tegra234-clock.h>
+
+    crypto@15840000 {
+        compatible = "nvidia,tegra234-se-hash";
+        reg = <0x15840000 0x10000>;
+        clocks = <&bpmp TEGRA234_CLK_SE>;
+        iommus = <&smmu TEGRA234_SID_SES_SE2>;
+        dma-coherent;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt
deleted file mode 100644
index fd9717653cbb..000000000000
--- a/Documentation/devicetree/bindings/crypto/omap-aes.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-OMAP SoC AES crypto Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  AES versions:
-  - "ti,omap2-aes" for OMAP2.
-  - "ti,omap3-aes" for OMAP3.
-  - "ti,omap4-aes" for OMAP4 and AM33XX.
-  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
-  more algorithms) but they are incompatible with OMAP4.
-- ti,hwmods: Name of the hwmod associated with the AES module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the AES module.
-
-Optional properties:
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-
-Example:
-	/* AM335x */
-	aes: aes@53500000 {
-		compatible = "ti,omap4-aes";
-		ti,hwmods = "aes";
-		reg = <0x53500000 0xa0>;
-		interrupts = <102>;
-		dmas = <&edma 6>,
-		       <&edma 5>;
-		dma-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt
deleted file mode 100644
index e8c63bf2e16d..000000000000
--- a/Documentation/devicetree/bindings/crypto/omap-des.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-OMAP SoC DES crypto Module
-
-Required properties:
-
-- compatible : Should contain "ti,omap4-des"
-- ti,hwmods: Name of the hwmod associated with the DES module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the DES module
-- clocks : A phandle to the functional clock node of the DES module
-           corresponding to each entry in clock-names
-- clock-names : Name of the functional clock, should be "fck"
-
-Optional properties:
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-	Each entry corresponds to an entry in dma-names
-- dma-names: DMA request names should include "tx" and "rx" if present
-
-Example:
-	/* DRA7xx SoC */
-	des: des@480a5000 {
-		compatible = "ti,omap4-des";
-		ti,hwmods = "des";
-		reg = <0x480a5000 0xa0>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&sdma 117>, <&sdma 116>;
-		dma-names = "tx", "rx";
-		clocks = <&l3_iclk_div>;
-		clock-names = "fck";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
deleted file mode 100644
index ad9115569611..000000000000
--- a/Documentation/devicetree/bindings/crypto/omap-sham.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-OMAP SoC SHA crypto Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
-  SHAM versions:
-  - "ti,omap2-sham" for OMAP2 & OMAP3.
-  - "ti,omap4-sham" for OMAP4 and AM33XX.
-  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
-- ti,hwmods: Name of the hwmod associated with the SHAM module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the SHAM module.
-
-Optional properties:
-- dmas: DMA specifiers for the rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request name. Should be "rx" if a dma is present.
-
-Example:
-	/* AM335x */
-	sham: sham@53100000 {
-		compatible = "ti,omap4-sham";
-		ti,hwmods = "sham";
-		reg = <0x53100000 0x200>;
-		interrupts = <109>;
-		dmas = <&edma 36>;
-		dma-names = "rx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
new file mode 100644
index 000000000000..c3408dcf5d20
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,kaanapali-inline-crypto-engine
+          - qcom,qcs8300-inline-crypto-engine
+          - qcom,sa8775p-inline-crypto-engine
+          - qcom,sc7180-inline-crypto-engine
+          - qcom,sc7280-inline-crypto-engine
+          - qcom,sm8450-inline-crypto-engine
+          - qcom,sm8550-inline-crypto-engine
+          - qcom,sm8650-inline-crypto-engine
+          - qcom,sm8750-inline-crypto-engine
+      - const: qcom,inline-crypto-engine
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    crypto@1d88000 {
+      compatible = "qcom,sm8550-inline-crypto-engine",
+                   "qcom,inline-crypto-engine";
+      reg = <0x01d88000 0x8000>;
+      clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
deleted file mode 100644
index 7ee0e9eac973..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm MSM pseudo random number generator.
-
-Required properties:
-
-- compatible  : should be "qcom,prng" for 8916 etc
-              : should be "qcom,prng-ee" for 8996 and later using EE
-		(Execution Environment) slice of prng
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-
-Example:
-
-	rng@f9bff000 {
-		compatible = "qcom,prng";
-		reg = <0xf9bff000 0x200>;
-		clocks = <&clock GCC_PRNG_AHB_CLK>;
-		clock-names = "core";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
new file mode 100644
index 000000000000..597441d94cf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,prng  # 8916 etc.
+          - qcom,prng-ee  # 8996 and later using EE
+      - items:
+          - enum:
+              - qcom,ipq5332-trng
+              - qcom,ipq5424-trng
+              - qcom,ipq9574-trng
+              - qcom,kaanapali-trng
+              - qcom,qcs615-trng
+              - qcom,qcs8300-trng
+              - qcom,sa8255p-trng
+              - qcom,sa8775p-trng
+              - qcom,sc7280-trng
+              - qcom,sm8450-trng
+              - qcom,sm8550-trng
+              - qcom,sm8650-trng
+              - qcom,sm8750-trng
+          - const: qcom,trng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,trng
+    then:
+      required:
+        - clocks
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
deleted file mode 100644
index fdd53b184ba8..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Qualcomm crypto engine driver
-
-Required properties:
-
-- compatible  : should be "qcom,crypto-v5.1"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "iface" clocks register interface
-                "bus" clocks data transfer interface
-                "core" clocks rest of the crypto block
-- dmas        : DMA specifiers for tx and rx dma channels. For more see
-                Documentation/devicetree/bindings/dma/dma.txt
-- dma-names   : DMA request names should be "rx" and "tx"
-
-Example:
-	crypto@fd45a000 {
-		compatible = "qcom,crypto-v5.1";
-		reg = <0xfd45a000 0x6000>;
-		clocks = <&gcc GCC_CE2_AHB_CLK>,
-			 <&gcc GCC_CE2_AXI_CLK>,
-			 <&gcc GCC_CE2_CLK>;
-		clock-names = "iface", "bus", "core";
-		dmas = <&cryptobam 2>, <&cryptobam 3>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 000000000000..79d5be2548bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  This document defines the binding for the QCE crypto
+  controller found on Qualcomm parts.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,crypto-v5.1
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - const: qcom,crypto-v5.4
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - items:
+          - enum:
+              - qcom,ipq4019-qce
+              - qcom,sm8150-qce
+          - const: qcom,qce
+
+      - items:
+          - enum:
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,ipq9574-qce
+              - qcom,msm8996-qce
+              - qcom,qcm2290-qce
+              - qcom,sdm845-qce
+              - qcom,sm6115-qce
+          - const: qcom,ipq4019-qce
+          - const: qcom,qce
+
+      - items:
+          - enum:
+              - qcom,kaanapali-qce
+              - qcom,qcs615-qce
+              - qcom,qcs8300-qce
+              - qcom,sa8775p-qce
+              - qcom,sc7280-qce
+              - qcom,sm6350-qce
+              - qcom,sm8250-qce
+              - qcom,sm8350-qce
+              - qcom,sm8450-qce
+              - qcom,sm8550-qce
+              - qcom,sm8650-qce
+              - qcom,sm8750-qce
+              - qcom,x1e80100-qce
+          - const: qcom,sm8150-qce
+          - const: qcom,qce
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description:
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    maxItems: 1
+    description:
+      Interconnect path between qce crypto and main memory.
+
+  interconnect-names:
+    const: memory
+
+  dmas:
+    items:
+      - description: DMA specifiers for rx dma channel.
+      - description: DMA specifiers for tx dma channel.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,crypto-v5.1
+              - qcom,crypto-v5.4
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,ipq9574-qce
+              - qcom,msm8996-qce
+              - qcom,sdm845-qce
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qce
+              - qcom,sm6115-qce
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: core
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qce
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+    crypto-engine@fd45a000 {
+        compatible = "qcom,ipq6018-qce", "qcom,ipq4019-qce", "qcom,qce";
+        reg = <0xfd45a000 0x6000>;
+        clocks = <&gcc GCC_CE2_AHB_CLK>,
+                 <&gcc GCC_CE2_AXI_CLK>,
+                 <&gcc GCC_CE2_CLK>;
+        clock-names = "iface", "bus", "core";
+        dmas = <&cryptobam 2>, <&cryptobam 3>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x584 0x0011>,
+                 <&apps_smmu 0x586 0x0011>,
+                 <&apps_smmu 0x594 0x0011>,
+                 <&apps_smmu 0x596 0x0011>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
new file mode 100644
index 000000000000..f1a9da8bff7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Electronics Security Accelerator
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-crypto
+      - rockchip,rk3328-crypto
+      - rockchip,rk3399-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: hclk
+            - const: sclk
+            - const: apb_pclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: master
+            - const: slave
+            - const: crypto-rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+    crypto@ff8a0000 {
+      compatible = "rockchip,rk3288-crypto";
+      reg = <0xff8a0000 0x4000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+      resets = <&cru SRST_CRYPTO>;
+      reset-names = "crypto-rst";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
deleted file mode 100644
index 5e2ba385b8c9..000000000000
--- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Rockchip Electronics And Security Accelerator
-
-Required properties:
-- compatible: Should be "rockchip,rk3288-crypto"
-- reg: Base physical address of the engine and length of memory mapped
-       region
-- interrupts: Interrupt number
-- clocks: Reference to the clocks about crypto
-- clock-names: "aclk" used to clock data
-	       "hclk" used to clock data
-	       "sclk" used to clock crypto accelerator
-	       "apb_pclk" used to clock dma
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-- reset-names: Must include the name "crypto-rst".
-
-Examples:
-
-	crypto: cypto-controller@ff8a0000 {
-		compatible = "rockchip,rk3288-crypto";
-		reg = <0xff8a0000 0x4000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
-			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
-		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
-		resets = <&cru SRST_CRYPTO>;
-		reset-names = "crypto-rst";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
index 676950bb7b37..5b31891c97fe 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -24,7 +24,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
     maxItems: 2
 
   clock-names:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
index b72e4858f9aa..50b2c2e0c3cd 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRC bindings
+title: STMicroelectronics STM32 CRC
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
index ed23bf94a8e0..27354658d054 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -4,7 +4,11 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRYP bindings
+title: STMicroelectronics STM32 CRYP
+
+description: The STM32 CRYP block is built on the CRYP block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
@@ -12,6 +16,8 @@ maintainers:
 properties:
   compatible:
     enum:
+      - st,stn8820-cryp
+      - stericsson,ux500-cryp
       - st,stm32f756-cryp
       - st,stm32mp1-cryp
 
@@ -27,6 +33,23 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: mem2cryp DMA channel
+      - description: cryp2mem DMA channel
+
+  dma-names:
+    items:
+      - const: mem2cryp
+      - const: cryp2mem
+
+  power-domains:
+    maxItems: 1
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 10ba94792d95..822318414095 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -4,7 +4,11 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 HASH bindings
+title: STMicroelectronics STM32 HASH
+
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
 
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
@@ -12,8 +16,11 @@ maintainers:
 properties:
   compatible:
     enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
       - st,stm32f456-hash
       - st,stm32f756-hash
+      - st,stm32mp13-hash
 
   reg:
     maxItems: 1
@@ -41,11 +48,30 @@ properties:
     maximum: 2
     default: 0
 
+  power-domains:
+    maxItems: 1
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
   - clocks
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
new file mode 100644
index 000000000000..7ccb6e1641d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Cryptographic Module
+
+maintainers:
+  - Jia Jie Ho <jiajie.ho@starfivetech.com>
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7110-crypto
+      - starfive,jh8100-crypto
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Hardware reference clock
+      - description: AHB reference clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: ahb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: SHA2 module irq
+      - description: SM3 module irq
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA channel
+      - description: RX DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: starfive,jh7110-crypto
+
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          const: starfive,jh8100-crypto
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+examples:
+  - |
+    crypto: crypto@16000000 {
+        compatible = "starfive,jh7110-crypto";
+        reg = <0x16000000 0x4000>;
+        clocks = <&clk 15>, <&clk 16>;
+        clock-names = "hclk", "ahb";
+        interrupts = <28>;
+        resets = <&reset 3>;
+        dmas = <&dma 1 2>,
+               <&dma 0 2>;
+        dma-names = "tx", "rx";
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/ti,am62l-dthev2.yaml b/Documentation/devicetree/bindings/crypto/ti,am62l-dthev2.yaml
new file mode 100644
index 000000000000..5486bfeb2fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,am62l-dthev2.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,am62l-dthev2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: K3 SoC DTHE V2 crypto module
+
+maintainers:
+  - T Pratham <t-pratham@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,am62l-dthev2
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: AES Engine RX DMA Channel
+      - description: AES Engine TX DMA Channel
+      - description: SHA Engine TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx1
+      - const: tx2
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@40800000 {
+        compatible = "ti,am62l-dthev2";
+        reg = <0x40800000 0x10000>;
+
+        dmas = <&main_bcdma 0 0 0x4700 0>,
+               <&main_bcdma 0 0 0xc701 0>,
+               <&main_bcdma 0 0 0xc700 0>;
+        dma-names = "rx", "tx1", "tx2";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
new file mode 100644
index 000000000000..d69b50228009
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,omap-sham.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC SHA crypto Module
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-sham
+      - ti,omap4-sham
+      - ti,omap5-sham
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ti,hwmods:
+    description: Name of the hwmod associated with the SHAM module
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sham]
+
+dependencies:
+  dmas: [dma-names]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - ti,hwmods
+  - reg
+  - interrupts
+
+examples:
+  - |
+    sham@53100000 {
+        compatible = "ti,omap4-sham";
+        ti,hwmods = "sham";
+        reg = <0x53100000 0x200>;
+        interrupts = <109>;
+        dmas = <&edma 36>;
+        dma-names = "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/ti,omap2-aes.yaml b/Documentation/devicetree/bindings/crypto/ti,omap2-aes.yaml
new file mode 100644
index 000000000000..90e92050ad2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,omap2-aes.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,omap2-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC AES crypto Module
+
+maintainers:
+  - Aaro Koskinen <aaro.koskinen@iki.fi>
+  - Andreas Kemnade <andreas@kemnade.info>
+  - Kevin Hilman <khilman@baylibre.com>
+  - Roger Quadros <rogerq@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-aes
+      - ti,omap3-aes
+      - ti,omap4-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  ti,hwmods:
+    description: Name of the hwmod associated with the AES module
+    const: aes
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    aes@53500000 {
+        compatible = "ti,omap4-aes";
+        reg = <0x53500000 0xa0>;
+        interrupts = <102>;
+        dmas = <&edma 6>,
+               <&edma 5>;
+        dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/ti,omap4-des.yaml b/Documentation/devicetree/bindings/crypto/ti,omap4-des.yaml
new file mode 100644
index 000000000000..f02f1e141218
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,omap4-des.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,omap4-des.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP4 DES crypto Module
+
+maintainers:
+  - Aaro Koskinen <aaro.koskinen@iki.fi>
+  - Andreas Kemnade <andreas@kemnade.info>
+  - Kevin Hilman <khilman@baylibre.com>
+  - Roger Quadros <rogerq@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+properties:
+  compatible:
+    const: ti,omap4-des
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+dependencies:
+  dmas: [ dma-names ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    des@480a5000 {
+        compatible = "ti,omap4-des";
+        reg = <0x480a5000 0xa0>;
+        interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&l3_iclk_div>;
+        clock-names = "fck";
+        dmas = <&sdma 117>, <&sdma 116>;
+        dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
index a410d2cedde6..ff10a0838ad6 100644
--- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml#
@@ -15,6 +15,7 @@ properties:
       - ti,j721e-sa2ul
       - ti,am654-sa2ul
       - ti,am64-sa2ul
+      - ti,am62-sa3ul
 
   reg:
     maxItems: 1
@@ -25,8 +26,8 @@ properties:
   dmas:
     items:
       - description: TX DMA Channel
-      - description: RX DMA Channel #1
-      - description: RX DMA Channel #2
+      - description: 'RX DMA Channel #1'
+      - description: 'RX DMA Channel #2'
 
   dma-names:
     items:
@@ -34,8 +35,6 @@ properties:
       - const: rx1
       - const: rx2
 
-  dma-coherent: true
-
   "#address-cells":
     const: 2
 
@@ -67,19 +66,21 @@ patternProperties:
 required:
   - compatible
   - reg
-  - power-domains
   - dmas
   - dma-names
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,j721e-sa2ul
-        - ti,am654-sa2ul
-then:
-  required:
-    - dma-coherent
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62-sa3ul
+    then:
+      properties:
+        power-domains: false
+    else:
+      required:
+        - power-domains
 
 additionalProperties: false
 
@@ -94,5 +95,4 @@ examples:
         dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
                <&main_udmap 0x4001>;
         dma-names = "tx", "rx1", "rx2";
-        dma-coherent;
     };
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,versal-trng.yaml b/Documentation/devicetree/bindings/crypto/xlnx,versal-trng.yaml
new file mode 100644
index 000000000000..9dfb0b0ab5c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/xlnx,versal-trng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/xlnx,versal-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal True Random Number Generator Hardware Accelerator
+
+maintainers:
+  - Harsh Jain <h.jain@amd.com>
+  - Mounika Botcha <mounika.botcha@amd.com>
+
+description:
+  The Versal True Random Number Generator consists of Ring Oscillators as
+  entropy source and a deterministic CTR_DRBG random bit generator (DRBG).
+
+properties:
+  compatible:
+    const: xlnx,versal-trng
+
+  reg:
+    maxItems: 1
+
+required:
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f1230000 {
+        compatible = "xlnx,versal-trng";
+        reg = <0xf1230000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
index 55dd6e3d270d..8aead97a585b 100644
--- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings
+title: Xilinx ZynqMP AES-GCM Hardware Accelerator
 
 maintainers:
-  - Kalyani Akula <kalyani.akula@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Michal Simek <michal.simek@amd.com>
 
 description: |
   The ZynqMP AES-GCM hardened cryptographic accelerator is used to
diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml
new file mode 100644
index 000000000000..50d3fabe958d
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/rockchip,dfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DFI
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dfi
+      - rockchip,rk3568-dfi
+      - rockchip,rk3588-dfi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk_ddr_mon
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  reg:
+    maxItems: 1
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3399-dfi
+
+then:
+  required:
+    - clocks
+    - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3308-cru.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dfi: dfi@ff630000 {
+        compatible = "rockchip,rk3399-dfi";
+        reg = <0x00 0xff630000 0x00 0x4000>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+        rockchip,pmu = <&pmugrf>;
+        clocks = <&cru PCLK_DDR_MON>;
+        clock-names = "pclk_ddr_mon";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
deleted file mode 100644
index 148191b0fc15..000000000000
--- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-
-* Rockchip rk3399 DFI device
-
-Required properties:
-- compatible: Must be "rockchip,rk3399-dfi".
-- reg: physical base address of each DFI and length of memory mapped region
-- rockchip,pmu: phandle to the syscon managing the "pmu general register files"
-- clocks: phandles for clock specified in "clock-names" property
-- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
-
-Example:
-	dfi: dfi@ff630000 {
-		compatible = "rockchip,rk3399-dfi";
-		reg = <0x00 0xff630000 0x00 0x4000>;
-		rockchip,pmu = <&pmugrf>;
-		clocks = <&cru PCLK_DDR_MON>;
-		clock-names = "pclk_ddr_mon";
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
index d318fccf78f1..2bdd05af6079 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos NoC (Network on Chip) Probe
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
index c9a8cb5fd555..d27dcb2fef12 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
@@ -18,7 +18,7 @@ description: |
   each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).  The
   Exynos PPMU driver uses the devfreq-event class to provide event data to
   various devfreq devices. The devfreq devices would use the event data when
-  derterming the current state of each IP.
+  determining the current state of each IP.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
deleted file mode 100644
index bcaa2c08ac11..000000000000
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ /dev/null
@@ -1,488 +0,0 @@
-* Generic Exynos Bus frequency device
-
-The Samsung Exynos SoC has many buses for data transfer between DRAM
-and sub-blocks in SoC. Most Exynos SoCs share the common architecture
-for buses. Generally, each bus of Exynos SoC includes a source clock
-and a power line, which are able to change the clock frequency
-of the bus in runtime. To monitor the usage of each bus in runtime,
-the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of sub-blocks.
-
-The Exynos SoC includes the various sub-blocks which have the each AXI bus.
-The each AXI bus has the owned source clock but, has not the only owned
-power line. The power line might be shared among one more sub-blocks.
-So, we can divide into two type of device as the role of each sub-block.
-There are two type of bus devices as following:
-- parent bus device
-- passive bus device
-
-Basically, parent and passive bus device share the same power line.
-The parent bus device can only change the voltage of shared power line
-and the rest bus devices (passive bus device) depend on the decision of
-the parent bus device. If there are three blocks which share the VDD_xxx
-power line, Only one block should be parent device and then the rest blocks
-should depend on the parent device as passive device.
-
-	VDD_xxx |--- A block (parent)
-		|--- B block (passive)
-		|--- C block (passive)
-
-There are a little different composition among Exynos SoC because each Exynos
-SoC has different sub-blocks. Therefore, such difference should be specified
-in devicetree file instead of each device driver. In result, this driver
-is able to support the bus frequency for all Exynos SoCs.
-
-Required properties for all bus devices:
-- compatible: Should be "samsung,exynos-bus".
-- clock-names : the name of clock used by the bus, "bus".
-- clocks : phandles for clock specified in "clock-names" property.
-- operating-points-v2: the OPP table including frequency/voltage information
-  to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
-
-Required properties only for parent bus device:
-- vdd-supply: the regulator to provide the buses with the voltage.
-- devfreq-events: the devfreq-event device to monitor the current utilization
-  of buses.
-
-Required properties only for passive bus device:
-- devfreq: the parent bus device.
-
-Optional properties only for parent bus device:
-- exynos,saturation-ratio: the percentage value which is used to calibrate
-			the performance count against total cycle count.
-
-Optional properties for the interconnect functionality (QoS frequency
-constraints):
-- #interconnect-cells: should be 0.
-- interconnects: as documented in ../interconnect.txt, describes a path at the
-  higher level interconnects used by this interconnect provider.
-  If this interconnect provider is directly linked to a top level interconnect
-  provider the property contains only one phandle. The provider extends
-  the interconnect graph by linking its node to a node registered by provider
-  pointed to by first phandle in the 'interconnects' property.
-
-- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data
-   clock frequency in Hz, default value is 8 when this property is missing.
-
-Detailed correlation between sub-blocks and power line according to Exynos SoC:
-- In case of Exynos3250, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC
-		|--- G3D
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- FSYS
-		|--- LCD0
-		|--- PERIR
-		|--- ISP
-		|--- CAM
-
-- In case of Exynos4210, there is one power line as following:
-	VDD_INT |--- DMC (parent device)
-		|--- LEFTBUS
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- LCD0
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- LCD1
-
-- In case of Exynos4x12, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- IMAGE
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- ISP
-
-- In case of Exynos5422, there are two power line as following:
-	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
-	        |--- DREX 1
-
-	VDD_INT |--- NoC_Core (parent device)
-		|--- G2D
-		|--- G3D
-		|--- DISP1
-		|--- NoC_WCORE
-		|--- GSCL
-		|--- MSCL
-		|--- ISP
-		|--- MFC
-		|--- GEN
-		|--- PERIS
-		|--- PERIC
-		|--- FSYS
-		|--- FSYS2
-
-- In case of Exynos5433, there is VDD_INT power line as following:
-	VDD_INT |--- G2D (parent device)
-		|--- MSCL
-		|--- GSCL
-		|--- JPEG
-		|--- MFC
-		|--- HEVC
-		|--- BUS0
-		|--- BUS1
-		|--- BUS2
-		|--- PERIS (Fixed clock rate)
-		|--- PERIC (Fixed clock rate)
-		|--- FSYS  (Fixed clock rate)
-
-Example 1:
-	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
-	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-	transfer data between DRAM and CPU and uses the VDD_MIF regulator.
-
-	- MIF (Memory Interface) block
-	: VDD_MIF |--- DMC (Dynamic Memory Controller)
-
-	- INT (Internal) block
-	: VDD_INT |--- LEFTBUS (parent device)
-		  |--- PERIL
-		  |--- MFC
-		  |--- G3D
-		  |--- RIGHTBUS
-		  |--- FSYS
-		  |--- LCD0
-		  |--- PERIR
-		  |--- ISP
-		  |--- CAM
-
-	- MIF bus's frequency/voltage table
-	-----------------------
-	|Lv| Freq   | Voltage |
-	-----------------------
-	|L1| 50000  |800000   |
-	|L2| 100000 |800000   |
-	|L3| 134000 |800000   |
-	|L4| 200000 |825000   |
-	|L5| 400000 |875000   |
-	-----------------------
-
-	- INT bus's frequency/voltage table
-	----------------------------------------------------------
-	|Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
-	| name|       |LCD0    |       |       |       ||        |
-	|     |       |FSYS    |       |       |       ||        |
-	|     |       |MFC     |       |       |       ||        |
-	----------------------------------------------------------
-	|Mode |*parent|passive |passive|passive|passive||        |
-	----------------------------------------------------------
-	|Lv   |Frequency                               ||Voltage |
-	----------------------------------------------------------
-	|L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
-	|L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
-	|L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
-	|L4   |134000 |134000  |200000 |200000 |       ||1000000 |
-	|L5   |200000 |200000  |400000 |300000 |       ||1000000 |
-	----------------------------------------------------------
-
-Example 2:
-	The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
-	is listed below:
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu_dmc CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <875000>;
-		};
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_lcd0: bus_lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mcuisp: bus_mcuisp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mcuisp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_isp: bus_isp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_isp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peril: bus_peril {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peril_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	bus_mcuisp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-	};
-
-	bus_isp_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_peril_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-
-	Usage case to handle the frequency and voltage of bus on runtime
-	in exynos3250-rinato.dts is listed below:
-
-	&bus_dmc {
-		devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-		vdd-supply = <&buck1_reg>;	/* VDD_MIF */
-		status = "okay";
-	};
-
-	&bus_leftbus {
-		devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-		vdd-supply = <&buck3_reg>;
-		status = "okay";
-	};
-
-	&bus_rightbus {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_lcd0 {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_fsys {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mcuisp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_isp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_peril {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mfc {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-Example 3:
-	An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on
-	Exynos4412 SoC with video mixer as an interconnect consumer device.
-
-	soc {
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_dmc>;
-		};
-
-		bus_display: bus_display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			/* ... */
-		}
-
-		bus_leftbus_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			/* ... */
-		};
-
-		bus_display_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			/* .. */
-		};
-
-		&mixer {
-			compatible = "samsung,exynos4212-mixer";
-			interconnects = <&bus_display &bus_dmc>;
-			/* ... */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
index e3379d106728..ea1dc86bc31f 100644
--- a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -19,11 +19,14 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - nvidia,tegra30-actmon
-      - nvidia,tegra114-actmon
-      - nvidia,tegra124-actmon
-      - nvidia,tegra210-actmon
+    oneOf:
+      - enum:
+          - nvidia,tegra30-actmon
+          - nvidia,tegra114-actmon
+          - nvidia,tegra124-actmon
+      - items:
+          - const: nvidia,tegra210-actmon
+          - const: nvidia,tegra124-actmon
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
deleted file mode 100644
index 58fc8a6cebc7..000000000000
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Rockchip rk3399 DMC (Dynamic Memory Controller) device
-
-Required properties:
-- compatible:		 Must be "rockchip,rk3399-dmc".
-- devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/event/
-			 rockchip-dfi.txt
-- clocks:		 Phandles for clock specified in "clock-names" property
-- clock-names :		 The name of clock used by the DFI, must be
-			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-			 for details.
-- center-supply:	 DMC supply node.
-- status:		 Marks the node enabled/disabled.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Optional properties:
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Following properties relate to DDR timing:
-
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-				  it selects the DDR3 cl-trp-trcd type. It must be
-				  set according to "Speed Bin" in DDR3 datasheet,
-				  DO NOT use a smaller "Speed Bin" than specified
-				  for the DDR3 being used.
-
-- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
-				  power-down idle period in which memories are
-				  placed into power-down mode if bus is idle
-				  for PD_IDLE DFI clock cycles.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
-				  self-refresh idle period in which memories are
-				  placed into self-refresh mode if bus is idle
-				  for SR_IDLE * 1024 DFI clock cycles (DFI
-				  clocks freq is half of DRAM clock), default
-				  value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
-				  clock gating idle period. Memories are placed
-				  into self-refresh mode and memory controller
-				  clock arg gating started if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clock cycles.
-
-- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
-				  period in which memories are placed into
-				  self-refresh power down mode if bus is idle
-				  for srpd_lite_idle * 1024 DFI clock cycles.
-				  This parameter is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defines the standby idle period in which
-				  memories are placed into self-refresh mode.
-				  The controller, pi, PHY and DRAM clock will
-				  be gated if bus is idle for standby_idle * DFI
-				  clock cycles.
-
-- rockchip,dram_dll_dis_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
-				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
-				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
-				  the odt will also stop working.
-
-- rockchip,phy_dll_dis_freq :	  Defines the PHY dll bypass frequency in
-				  MHz (Mega Hz). When DDR frequency is less than
-				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
-				  Note: PHY DLL and PHY ODT are independent.
-
-- rockchip,ddr3_odt_dis_freq :	  When the DRAM type is DDR3, this parameter defines
-				  the ODT disable frequency in MHz (Mega Hz).
-				  when the DDR frequency is  less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 40.
-
-- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 120.
-
-- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the phy side CA line (incluing command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is 240.
-
-- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
-				  then ODT disable frequency in MHz (Mega Hz).
-				  When DDR frequency is less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 34.
-
-- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 240.
-
-- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side CA line (including command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is 240.
-
-- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
-				  defines the ODT disable frequency in
-				  MHz (Mega Hz). When the DDR frequency is less then
-				  ddr3_odt_dis_freq, the ODT on the DRAM side and
-				  controller side are both disabled.
-
-- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 60.
-
-- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is 40.
-
-- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is 40.
-
-- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side CA line (including command address
-				  line) driver strength. Default value is 40.
-
-- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side clock line and CS line driver
-				  strength. Default value is 80.
-
-- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 80.
-
-- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is 60.
-
-Example:
-	dmc_opp_table: dmc_opp_table {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-	};
-
-	dmc: dmc {
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DDRC>;
-		clock-names = "dmc_clk";
-		operating-points-v2 = <&dmc_opp_table>;
-		center-supply = <&ppvar_centerlogic>;
-		upthreshold = <15>;
-		downdifferential = <10>;
-		rockchip,ddr3_speed_bin = <21>;
-		rockchip,pd_idle = <0x40>;
-		rockchip,sr_idle = <0x2>;
-		rockchip,sr_mc_gate_idle = <0x3>;
-		rockchip,srpd_lite_idle	= <0x4>;
-		rockchip,standby_idle = <0x2000>;
-		rockchip,dram_dll_dis_freq = <300>;
-		rockchip,phy_dll_dis_freq = <125>;
-		rockchip,auto_pd_dis_freq = <666>;
-		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <40>;
-		rockchip,ddr3_odt = <120>;
-		rockchip,phy_ddr3_ca_drv = <40>;
-		rockchip,phy_ddr3_dq_drv = <40>;
-		rockchip,phy_ddr3_odt = <240>;
-		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <34>;
-		rockchip,lpddr3_odt = <240>;
-		rockchip,phy_lpddr3_ca_drv = <40>;
-		rockchip,phy_lpddr3_dq_drv = <40>;
-		rockchip,phy_lpddr3_odt = <240>;
-		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <60>;
-		rockchip,lpddr4_dq_odt = <40>;
-		rockchip,lpddr4_ca_odt = <40>;
-		rockchip,phy_lpddr4_ca_drv = <40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <80>;
-		rockchip,phy_lpddr4_dq_drv = <80>;
-		rockchip,phy_lpddr4_odt = <60>;
-	};
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
index 3d8ea3c2d8dd..ba06d1857b7d 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Backend Device Tree Bindings
+title: Allwinner A10 Display Engine Backend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index e77523b02fad..e6088f379f70 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+title: Allwinner A10 Display Engine Pipeline
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -62,6 +62,7 @@ properties:
       - allwinner,sun8i-r40-display-engine
       - allwinner,sun8i-v3s-display-engine
       - allwinner,sun9i-a80-display-engine
+      - allwinner,sun20i-d1-display-engine
       - allwinner,sun50i-a64-display-engine
       - allwinner,sun50i-h6-display-engine
 
@@ -69,6 +70,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 2
+    items:
+      maxItems: 1
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
@@ -91,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 055157fbf3bf..995b3ef408b7 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+title: Allwinner A10 Display Engine Frontend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 7f11452539f4..55703caacb9c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 HDMI Controller Device Tree Bindings
+title: Allwinner A10 HDMI Controller
 
 description: |
   The HDMI Encoder supports the HDMI video and audio outputs, and does
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index 3a7d5d731712..724d93b9193b 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
+title: Allwinner A10 Timings Controller (TCON)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -33,6 +33,8 @@ properties:
       - const: allwinner,sun8i-v3s-tcon
       - const: allwinner,sun9i-a80-tcon-lcd
       - const: allwinner,sun9i-a80-tcon-tv
+      - const: allwinner,sun20i-d1-tcon-lcd
+      - const: allwinner,sun20i-d1-tcon-tv
 
       - items:
           - enum:
@@ -231,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -250,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -276,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -292,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index afc0ed799e0e..c39e90a5945f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TV Encoder Device Tree Bindings
+title: Allwinner A10 TV Encoder
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 71cce5687580..85a6086cc10e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+title: Allwinner A31 Dynamic Range Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index bf0bdf54e5f9..c731fbdc2fe0 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+title: Allwinner A31 MIPI-DSI Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -12,9 +12,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun6i-a31-mipi-dsi
-      - allwinner,sun50i-a64-mipi-dsi
+    oneOf:
+      - enum:
+          - allwinner,sun6i-a31-mipi-dsi
+          - allwinner,sun50i-a64-mipi-dsi
+          - allwinner,sun50i-a100-mipi-dsi
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dsi
+          - const: allwinner,sun50i-a100-mipi-dsi
 
   reg:
     maxItems: 1
@@ -59,7 +64,6 @@ required:
   - phys
   - phy-names
   - resets
-  - vcc-dsi-supply
   - port
 
 allOf:
@@ -68,7 +72,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun6i-a31-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a100-mipi-dsi
 
     then:
       properties:
@@ -78,16 +84,22 @@ allOf:
       required:
         - clock-names
 
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-a64-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a64-mipi-dsi
 
     then:
-      properties:
-        clocks:
-          minItems: 1
+      required:
+        - vcc-dsi-supply
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
index 4f91eec26de9..cbd18fd83e52 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+title: Allwinner Display Engine 2.0 Mixer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,12 +19,16 @@ properties:
       - allwinner,sun8i-r40-de2-mixer-0
       - allwinner,sun8i-r40-de2-mixer-1
       - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun20i-d1-de2-mixer-0
+      - allwinner,sun20i-d1-de2-mixer-1
       - allwinner,sun50i-a64-de2-mixer-0
       - allwinner,sun50i-a64-de2-mixer-1
       - allwinner,sun50i-h6-de3-mixer-0
+      - allwinner,sun50i-h616-de33-mixer-0
 
-  reg:
-    maxItems: 1
+  reg: true
+
+  reg-names: true
 
   clocks:
     items:
@@ -59,6 +63,34 @@ properties:
     required:
       - port@1
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-de33-mixer-0
+    then:
+      properties:
+        reg:
+          description: |
+            Registers for controlling individual layers of the display
+            engine (layers), global control (top), and display blending
+            control (display). Names are from Allwinner BSP kernel.
+          maxItems: 3
+        reg-names:
+          items:
+            - const: layers
+            - const: top
+            - const: display
+      required:
+        - reg-names
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4951b5ef5c6a..c43b02ec884f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+title: Allwinner A83t DWC HDMI TX Encoder
 
 description: |
   The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
@@ -142,7 +142,6 @@ then:
     reset-names:
       minItems: 2
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
index a97366aaf924..1b47f3d99a78 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t HDMI PHY Device Tree Bindings
+title: Allwinner A83t HDMI PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
index 61ef7b337218..7d849c4095a3 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 TCON TOP Device Tree Bindings
+title: Allwinner R40 TCON TOP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -41,6 +41,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun20i-d1-tcon-top
       - allwinner,sun50i-h6-tcon-top
 
   reg:
@@ -48,31 +49,15 @@ properties:
 
   clocks:
     minItems: 2
-    items:
-      - description: The TCON TOP interface clock
-      - description: The TCON TOP TV0 clock
-      - description: The TCON TOP TVE0 clock
-      - description: The TCON TOP TV1 clock
-      - description: The TCON TOP TVE1 clock
-      - description: The TCON TOP MIPI DSI clock
+    maxItems: 6
 
   clock-names:
     minItems: 2
-    items:
-      - const: bus
-      - const: tcon-tv0
-      - const: tve0
-      - const: tcon-tv1
-      - const: tve1
-      - const: dsi
+    maxItems: 6
 
   clock-output-names:
     minItems: 1
     maxItems: 3
-    description: >
-      The first item is the name of the clock created for the TV0
-      channel, the second item is the name of the TCON TV1 channel
-      clock and the third one is the name of the DSI channel clock.
 
   resets:
     maxItems: 1
@@ -129,32 +114,92 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-tcon-top
-
-then:
-  properties:
-    clocks:
-      maxItems: 2
-
-    clock-output-names:
-      maxItems: 1
-
-else:
-  properties:
-    clocks:
-      minItems: 6
-
-    clock-output-names:
-      minItems: 3
-
-    ports:
-      required:
-        - port@2
-        - port@3
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-r40-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP TV1 clock
+            - description: The TCON TOP TVE1 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: tcon-tv1
+            - const: tve1
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: TCON TV1 output clock name
+            - description: DSI output clock name
+
+        ports:
+          required:
+            - port@2
+            - port@3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-d1-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: DSI output clock name
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
index 637372ec4614..193afee2c3c1 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+title: Allwinner A80 Detail Enhancement Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..416fe263ac92 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -2,13 +2,16 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
 
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
@@ -68,6 +71,10 @@ properties:
       - const: iahb
       - const: venci
 
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
   resets:
     minItems: 3
 
@@ -99,6 +106,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
@@ -124,6 +133,7 @@ examples:
         reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
         clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
         clock-names = "isfr", "iahb", "venci";
+        power-domains = <&pd_vpu>;
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -138,11 +148,10 @@ examples:
 
         /* TMDS Output */
         hdmi_tx_tmds_port: port@1 {
-             reg = <1>;
+            reg = <1>;
 
-             hdmi_tx_tmds_out: endpoint {
-                 remote-endpoint = <&hdmi_connector_in>;
-             };
+            hdmi_tx_tmds_out: endpoint {
+                remote-endpoint = <&hdmi_connector_in>;
+            };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..a3428f012005
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare MIPI DSI Host Controller IP
+  - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-dw-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: bit
+      - const: px
+      - const: meas
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: top
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@6000 {
+          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+          reg = <0x6000 0x400>;
+          resets = <&reset_top>;
+          reset-names = "top";
+          clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>;
+          clock-names = "pclk", "bit", "px";
+          phys = <&mipi_dphy>;
+          phy-names = "dphy";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              /* VPU VENC Input */
+              mipi_dsi_venc_port: port@0 {
+                  reg = <0>;
+
+                  mipi_dsi_in: endpoint {
+                       remote-endpoint = <&dpi_out>;
+                  };
+              };
+
+              /* DSI Output */
+              mipi_dsi_panel_port: port@1 {
+                  reg = <1>;
+
+                  mipi_out_panel: endpoint {
+                      remote-endpoint = <&mipi_in_panel>;
+                  };
+              };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..3ae45db85ea7 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Display Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson Display controller is composed of several components
@@ -25,7 +25,6 @@ description: |
   M  |-------|______|----|____________|   |________________|    |               |
   ___|__________________________________________________________|_______________|
 
-
   VIU: Video Input Unit
   ---------------------
 
@@ -78,6 +77,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -92,6 +95,11 @@ properties:
     description:
       A port node pointing to the HDMI-TX port node.
 
+  port@2:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver).
+
   "#address-cells":
     const: 1
 
@@ -106,6 +114,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +127,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git a/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml b/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
new file mode 100644
index 000000000000..5e6da66499a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/apple,h7-display-pipe-mipi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/apple,h7-display-pipe-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple pre-DCP display controller MIPI interface
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  The MIPI controller part of the pre-DCP Apple display controller
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-display-pipe-mipi
+          - apple,t8103-display-pipe-mipi
+      - const: apple,h7-display-pipe-mipi
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port. Always connected to the primary controller
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output MIPI DSI port to the panel
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@28200000 {
+        compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+        reg = <0x28200000 0xc000>;
+        power-domains = <&ps_dispdfr_mipi>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dfr_adp_out_mipi: endpoint {
+                    remote-endpoint = <&dfr_adp_out_mipi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dfr_panel_in: endpoint {
+                    remote-endpoint = <&dfr_mipi_out_panel>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
new file mode 100644
index 000000000000..102fb1804c0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/apple,h7-display-pipe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple pre-DCP display controller
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  A secondary display controller used to drive the "touchbar" on
+  certain Apple laptops.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-display-pipe
+          - apple,t8103-display-pipe
+      - const: apple,h7-display-pipe
+
+  reg:
+    items:
+      - description: Primary register block, controls planes and blending
+      - description:
+          Contains other configuration registers like interrupt
+          and FIFO control
+
+  reg-names:
+    items:
+      - const: be
+      - const: fe
+
+  power-domains:
+    description:
+      Phandles to pmgr entries that are needed for this controller to turn on.
+      Aside from that, their specific functions are unknown
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Unknown function
+      - description: Primary interrupt. Vsync events are reported via it
+
+  interrupt-names:
+    items:
+      - const: be
+      - const: fe
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output port. Always connected to apple,h7-display-pipe-mipi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    display-pipe@28200000 {
+        compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+        reg = <0x28200000 0xc000>,
+              <0x28400000 0x4000>;
+        reg-names = "be", "fe";
+        power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "be", "fe";
+        iommus = <&displaydfr_dart 0>;
+
+        port {
+            dfr_adp_out_mipi: endpoint {
+                remote-endpoint = <&dfr_mipi_in_adp>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
-  - compatible: "arm,hdlcd"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: One interrupt used by the display controller to notify the
-    interrupt controller when any of the interrupt sources programmed in
-    the interrupt mask register have activated.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For HDLCD it should contain:
-      - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
-  - port: The HDLCD connection to an encoder chip. The connection is modeled
-    using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
-    used for the framebuffer; if not present, the framebuffer may be located
-    anywhere in memory.
-
-
-Example:
-
-/ {
-	...
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-		port {
-			hdlcd_output: endpoint@0 {
-				remote-endpoint = <&hdmi_enc_input>;
-			};
-		};
-	};
-
-	/* HDMI encoder on I2C bus */
-	i2c@7ffa0000 {
-		....
-		hdmi-transmitter@70 {
-			compatible = ".....";
-			reg = <0x70>;
-			port@0 {
-				hdmi_enc_input: endpoint {
-					remote-endpoint = <&hdlcd_output>;
-				};
-
-				hdmi_enc_output: endpoint {
-					remote-endpoint = <&hdmi_1_port>;
-				};
-			};
-		};
-
-	};
-
-	hdmi1: connector@1 {
-		compatible = "hdmi-connector";
-		type = "a";
-		port {
-			hdmi_1_port: endpoint {
-				remote-endpoint = <&hdmi_enc_output>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..9a30e9005e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..3ad3eef89ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..91812573fd08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP)
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
-	"arm,pl110", "arm,primecell"
-	"arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
-	combined interrupt output (CLCDINTR), or the four entries
-	"mbe", "vcomp", "lnbu", "fuf" representing the individual
-	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
-	interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-	to be used for the framebuffer; if not present, the framebuffer
-	may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
-	cell's memory interface can handle; if not present, the memory
-	interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
-	The port's endbpoint subnode had this, now deprecated property
-	in the past. Drivers should be able to survive without it:
-
-	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
-		defining the way CLD pads are wired up; first value
-		contains index of the "CLD" external pin (pad) used
-		as R0 (first bit of the red component), second value
-	        index of the pad used as G0, third value index of the
-		pad used as B0, see also "LCD panel signal multiplexing
-		details" paragraphs in the PL110/PL111 Technical
-		Reference Manuals; this implicitly defines available
-		color modes, for example:
-		- PL111 TFT 4:4:4 panel:
-			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
-		- PL110 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-		- PL111 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
-		- PL111 TFT 5:6:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
-		- PL110 and PL111 TFT 8:8:8 panel:
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
-			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
-		port {
-			clcd_pads: endpoint {
-				remote-endpoint = <&clcd_panel>;
-			};
-		};
-
-	};
-
-	panel {
-		compatible = "panel-dpi";
-
-		port {
-			clcd_panel: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <25175000>;
-			hactive = <640>;
-			hback-porch = <40>;
-			hfront-porch = <24>;
-			hsync-len = <96>;
-			vactive = <480>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..a43c1c9d9113
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml
new file mode 100644
index 000000000000..a5cf040ab4ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Display
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image data
+  from an external display buffer to a TFT LCD panel. The LCDC has one display
+  input buffer per layer that fetches pixels through the single bus host
+  interface and a look-up table to allow palletized display configurations. The
+  LCDC is programmable on a per layer basis, and supports different LCD
+  resolutions, window sizes, image formats and pixel depths.
+
+# We need a select here since this schema is applicable only for nodes with the
+# following properties
+
+select:
+  anyOf:
+    - required: [ 'atmel,dmacon' ]
+    - required: [ 'atmel,lcdcon2' ]
+    - required: [ 'atmel,guard-time' ]
+
+properties:
+  atmel,dmacon:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: dma controller configuration
+
+  atmel,lcdcon2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd controller configuration
+
+  atmel,guard-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd guard time (Delay in frame periods)
+    maximum: 127
+
+  bits-per-pixel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd panel bit-depth.
+    enum: [1, 2, 4, 8, 16, 24, 32]
+
+  atmel,lcdcon-backlight:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable backlight
+
+  atmel,lcdcon-backlight-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: invert backlight PWM polarity
+
+  atmel,lcd-wiring-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: lcd wiring mode "RGB" or "BRG"
+    enum:
+      - RGB
+      - BRG
+
+  atmel,power-control-gpio:
+    description: gpio to power on or off the LCD (as many as needed)
+    maxItems: 1
+
+  display-timings:
+    $ref: panel/display-timings.yaml#
+
+required:
+  - atmel,dmacon
+  - atmel,lcdcon2
+  - atmel,guard-time
+  - bits-per-pixel
+
+additionalProperties: false
+
+examples:
+  - |
+    display: panel {
+      bits-per-pixel = <32>;
+      atmel,lcdcon-backlight;
+      atmel,dmacon = <0x1>;
+      atmel,lcdcon2 = <0x80008002>;
+      atmel,guard-time = <9>;
+      atmel,lcd-wiring-mode = "RGB";
+
+      display-timings {
+        native-mode = <&timing0>;
+        timing0: timing0 {
+          clock-frequency = <9000000>;
+          hactive = <480>;
+          vactive = <272>;
+          hback-porch = <1>;
+          hfront-porch = <1>;
+          vback-porch = <40>;
+          vfront-porch = <1>;
+          hsync-len = <45>;
+          vsync-len = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
deleted file mode 100644
index acb5a0132127..000000000000
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Atmel LCDC Framebuffer
------------------------------------------------------
-
-Required properties:
-- compatible :
-	"atmel,at91sam9261-lcdc" , 
-	"atmel,at91sam9263-lcdc" ,
-	"atmel,at91sam9g10-lcdc" ,
-	"atmel,at91sam9g45-lcdc" ,
-	"atmel,at91sam9g45es-lcdc" ,
-	"atmel,at91sam9rl-lcdc" ,
-	"atmel,at32ap-lcdc"
-- reg : Should contain 1 register ranges(address and length).
-	Can contain an additional register range(address and length)
-	for fixed framebuffer memory. Useful for dedicated memories.
-- interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
-
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-	This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
-	as specified below.
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-
-Example:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9g45-lcdc";
-		reg = <0x00500000 0x1000>;
-		interrupts = <23 3 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fb>;
-		display = <&display0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-	};
-
-Example for fixed framebuffer memory:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9263-lcdc";
-		reg = <0x00700000 0x1000 0x70000000 0x200000>;
-		[...]
-	};
-
-Atmel LCDC Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - atmel,dmacon: dma controller configuration
- - atmel,lcdcon2: lcd controller configuration
- - atmel,guard-time: lcd guard time (Delay in frame periods)
- - bits-per-pixel: lcd panel bit-depth.
-
-Optional properties (as per of_videomode_helper):
- - atmel,lcdcon-backlight: enable backlight
- - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
-
-Example:
-	display0: display {
-		bits-per-pixel = <32>;
-		atmel,lcdcon-backlight;
-		atmel,dmacon = <0x1>;
-		atmel,lcdcon2 = <0x80008002>;
-		atmel,guard-time = <9>;
-		atmel,lcd-wiring-mode = <1>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <1>;
-				hfront-porch = <1>;
-				vback-porch = <40>;
-				vfront-porch = <1>;
-				hsync-len = <45>;
-				vsync-len = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml
new file mode 100644
index 000000000000..1b6f7e395006
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Framebuffer
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCDC works with a framebuffer, which is a section of memory that contains
+  a complete frame of data representing pixel values for the display. The LCDC
+  reads the pixel data from the framebuffer and sends it to the LCD panel to
+  render the image.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9261-lcdc
+      - atmel,at91sam9263-lcdc
+      - atmel,at91sam9g10-lcdc
+      - atmel,at91sam9g45-lcdc
+      - atmel,at91sam9g45es-lcdc
+      - atmel,at91sam9rl-lcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: lcdc_clk
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle pointing to the display node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - display
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    fb@500000 {
+      compatible = "atmel,at91sam9g45-lcdc";
+      reg = <0x00500000 0x1000>;
+      interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_fb>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+      clock-names = "hclk", "lcdc_clk";
+      display = <&display>;
+    };
diff --git a/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 000000000000..29ed42485de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 0398aec488ac..000000000000
--- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph reprensentation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..c1cefd547391 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+title: Broadcom BCM2711 HDMI Controller
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -14,6 +14,8 @@ properties:
     enum:
       - brcm,bcm2711-hdmi0
       - brcm,bcm2711-hdmi1
+      - brcm,bcm2712-hdmi0
+      - brcm,bcm2712-hdmi1
 
   reg:
     items:
@@ -54,26 +56,15 @@ properties:
       - const: cec
 
   interrupts:
-    items:
-      - description: CEC TX interrupt
-      - description: CEC RX interrupt
-      - description: CEC stuck at low interrupt
-      - description: Wake-up interrupt
-      - description: Hotplug connected interrupt
-      - description: Hotplug removed interrupt
+    minItems: 5
+    maxItems: 6
 
   interrupt-names:
-    items:
-      - const: cec-tx
-      - const: cec-rx
-      - const: cec-low
-      - const: wakeup
-      - const: hpd-connected
-      - const: hpd-removed
+    minItems: 5
+    maxItems: 6
 
   ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: >
       Phandle of the I2C controller used for DDC EDID probing
 
@@ -111,6 +102,61 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2711-hdmi0
+              - brcm,bcm2711-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Wake-up interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupt-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: wakeup
+            - const: hpd-connected
+            - const: hpd-removed
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2712-hdmi0
+              - brcm,bcm2712-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupts-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: hpd-connected
+            - const: hpd-removed
+
+      required:
+        - interrupts
+        - interrupt-names
+
 examples:
   - |
     hdmi0: hdmi@7ef00700 {
@@ -135,6 +181,9 @@ examples:
                     "hd";
         clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
         clock-names = "hdmi", "bvb", "audio", "cec";
+        interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+        interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
+                          "hpd-connected", "hpd-removed";
         resets = <&dvp 0>;
         ddc = <&ddc0>;
     };
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
index 2e8566f47e63..9aca38a58a16 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -13,17 +13,27 @@ properties:
   compatible:
     enum:
       - brcm,bcm2711-hvs
+      - brcm,bcm2712-hvs
       - brcm,bcm2835-hvs
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
 
   clocks:
-    maxItems: 1
-    description: Core Clock
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -32,15 +42,68 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: brcm,bcm2711-hvs
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-hvs
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Core Clock
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
+
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2712-hvs
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: core
+            - const: disp
+        interrupts:
+          items:
+            - description: Channel 0 End of frame
+            - description: Channel 1 End of frame
+            - description: Channel 2 End of frame
+        interrupt-names:
+          items:
+            - const: ch0-eof
+            - const: ch1-eof
+            - const: ch2-eof
+      required:
+        - clocks
+        - clock-names
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2835-hvs
 
-then:
-  required:
-    - clocks
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
index 4e1ba03f6477..6b5b1d3fbc0b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -20,6 +20,9 @@ properties:
       - brcm,bcm2711-pixelvalve2
       - brcm,bcm2711-pixelvalve3
       - brcm,bcm2711-pixelvalve4
+      - brcm,bcm2712-pixelvalve0
+      - brcm,bcm2712-pixelvalve1
+      - brcm,bcm2712-pixelvalve2
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
index bb186197e471..16f45afd2bad 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
@@ -11,7 +11,10 @@ maintainers:
 
 properties:
   compatible:
-    const: brcm,bcm2835-txp
+    enum:
+      - brcm,bcm2712-mop
+      - brcm,bcm2712-moplet
+      - brcm,bcm2835-txp
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
index 49a5e041aa49..2aa9d5d2afff 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - brcm,bcm2711-vc5
+      - brcm,bcm2712-vc6
       - brcm,bcm2835-vc4
       - brcm,cygnus-vc4
 
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..d29a0d06187e 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:
 
   adi,input-depth:
     description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
 
   adi,input-colorspace:
     description: Input color space.
@@ -118,23 +117,21 @@ properties:
 
   ports:
     description:
-      The ADV7511(W)/13 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description: Video port for the RGB or YUV input.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 # adi,input-colorspace and adi,input-clock are required except in
 # "rgb 1x" and "yuv444 1x" modes, in which case they must not be
@@ -159,7 +156,6 @@ else:
     adi,input-style: false
     adi,input-justification: false
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..ec89115c74e4 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -9,6 +9,9 @@ title: Analog Devices ADV7533/35 HDMI Encoders
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 description: |
   The ADV7533 and ADV7535 are HDMI audio and video transmitters
   compatible with HDMI 1.4 and DVI 1.0. They support color space
@@ -87,29 +90,30 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
+
+  "#sound-dai-cells":
+    const: 0
 
   ports:
     description:
-      The ADV7533/35 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description:
           Video port for the DSI input. The remote endpoint phandle
           should be a reference to a valid mipi_dsi_host_device.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index ab48ab2f4240..a1ed1004651b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Analogix Semiconductor, Inc.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
 
@@ -16,8 +16,7 @@ description: |
 
 properties:
   compatible:
-    items:
-      - const: analogix,anx7625
+    const: analogix,anx7625
 
   reg:
     maxItems: 1
@@ -43,14 +42,73 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
-          Video port for MIPI DSI input.
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [7]
+                default: 1
+
+              data-lanes: true
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -75,7 +133,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -87,6 +145,9 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -96,6 +157,8 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
                     };
                 };
 
@@ -106,5 +169,19 @@ examples:
                     };
                 };
             };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
index 8e13f27b28ed..4509c496731b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
 
 maintainers:
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
 
 properties:
   compatible:
@@ -15,6 +17,7 @@ properties:
       - analogix,anx7808
       - analogix,anx7812
       - analogix,anx7814
+      - analogix,anx7816
       - analogix,anx7818
 
   reg:
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 000000000000..62f0521b0924
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys: true
+
+  phy-names:
+    const: dp
+
+  force-hpd:
+    type: boolean
+    description:
+      Indicate driver need force hpd when hpd detect failed, this
+      is used for some eDP screen which don not have a hpd signal.
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
deleted file mode 100644
index 027d76c27a41..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Analogix Display Port bridge bindings
-
-Required properties for dp-controller:
-	-compatible:
-		platform specific such as:
-		 * "samsung,exynos5-dp"
-		 * "rockchip,rk3288-dp"
-		 * "rockchip,rk3399-edp"
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-force-hpd:
-		Indicate driver need force hpd when hpd detect failed, this
-		is used for some eDP screen which don't have hpd signal.
-	-hpd-gpios:
-		Hotplug detect GPIO.
-		Indicates which GPIO should be used for hotplug detection
-	-port@[X]: SoC specific port nodes with endpoint definitions as defined
-		in Documentation/devicetree/bindings/media/video-interfaces.txt,
-		please refer to the SoC specific binding document:
-		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
--------------------------------------------------------------------------------
-
-Example:
-
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 1c0406c38fe5..514f58852990 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+title: Analogix ANX6345 eDP Transmitter
 
 maintainers:
   - Torsten Duwe <duwe@lst.de>
@@ -61,7 +61,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
deleted file mode 100644
index 525a4bfd8634..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Cadence DSI bridge
-==================
-
-The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes.
-
-Required properties:
-- compatible: should be set to "cdns,dsi".
-- reg: physical base address and length of the controller's registers.
-- interrupts: interrupt line connected to the DSI bridge.
-- clocks: DSI bridge clocks.
-- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk".
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy".
-- #address-cells: must be set to 1.
-- #size-cells: must be set to 0.
-
-Optional properties:
-- resets: DSI reset lines.
-- reset-names: can contain "dsi_p_rst".
-
-Required subnodes:
-- ports: Ports as described in Documentation/devicetree/bindings/graph.txt.
-  2 ports are available:
-  * port 0: this port is only needed if some of your DSI devices are
-	    controlled through  an external bus like I2C or SPI. Can have at
-	    most 4 endpoints. The endpoint number is directly encoding the
-	    DSI virtual channel used by this device.
-  * port 1: represents the DPI input.
-  Other ports will be added later to support the new kind of inputs.
-
-- one subnode per DSI device connected on the DSI bus. Each DSI device should
-  contain a reg property encoding its virtual channel.
-
-Example:
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy0>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-
-		panel: dsi-dev@0 {
-			compatible = "<vendor,panel>";
-			reg = <0>;
-		};
-	};
-
-or
-
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy1>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dsi0_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&dsi_panel_input>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-	};
-
-	i2c@xxx {
-		panel: panel@59 {
-			compatible = "<vendor,panel>";
-			reg = <0x59>;
-
-			port {
-				dsi_panel_input: endpoint {
-					remote-endpoint = <&dsi0_output>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 000000000000..23060324d16e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+  - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+   CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+  compatible:
+    enum:
+      - cdns,dsi
+      - ti,j721e-dsi
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block for controller's registers.
+      - description:
+          Register block for wrapper settings registers in case of TI J7 SoCs.
+
+  clocks:
+    items:
+      - description: PSM clock, used by the IP
+      - description: sys clock, used by the IP
+
+  clock-names:
+    items:
+      - const: dsi_p_clk
+      - const: dsi_sys_clk
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dsi_p_rst
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DSI output. It can have
+          at most 4 endpoints. The endpoint number is directly encoding
+          the DSI virtual channel used by this device.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port representing the DPI input.
+
+    required:
+      - port@1
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-dsi
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+
+            panel@0 {
+                compatible = "panasonic,vvx10f034n00";
+                reg = <0>;
+                power-supply = <&vcc_lcd_reg>;
+            };
+        };
+    };
+
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy1>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dsi_panel_input>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index b2e8bc6da9d0..c2b369456e4e 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence MHDP8546 bridge
 
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 62c3bd4cb28d..5fb54375aeb6 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -24,6 +24,15 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
   enable-gpios:
     description: Bridge EN pin, chip is reset when EN is low.
 
@@ -41,17 +50,32 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           Video port for MIPI DSI input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index bb6289c7d375..b0589fa16736 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Chrontel CH7033 Video Encoder Device Tree Bindings
+title: Chrontel CH7033 Video Encoder
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 000000000000..6211ab8bbb0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel audio input port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&pvi_to_hdmi_tx>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&hdmi0_con>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+
+                endpoint {
+                    remote-endpoint = <&pai_to_hdmi_tx>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 000000000000..94543006f5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 000000000000..50bae2122183
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 000000000000..38ecc7926fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 000000000000..e4e77fad05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
new file mode 100644
index 000000000000..d6e51d0cf546
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys
+  Designware MIPI DPHY embedded in Freescale i.MX93 SoC.  Some configurations
+  and extensions to them are controlled by i.MX93 media blk-ctrl.
+
+allOf:
+  - $ref: snps,dw-mipi-dsi.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx93-mipi-dsi
+
+  clocks:
+    items:
+      - description: apb clock
+      - description: pixel clock
+      - description: PHY configuration clock
+      - description: PHY reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: pix
+      - const: phy_cfg
+      - const: phy_ref
+
+  interrupts:
+    maxItems: 1
+
+  fsl,media-blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map
+      configurations from LCDIF display controller to the MIPI DSI host
+      controller and MIPI DPHY PLL related configurations through PLL SoC
+      interface.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - fsl,media-blk-ctrl
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    dsi@4ae10000 {
+        compatible = "fsl,imx93-mipi-dsi";
+        reg = <0x4ae10000 0x10000>;
+        interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>,
+                 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+                 <&clk IMX93_CLK_MIPI_PHY_CFG>,
+                 <&clk IMX93_CLK_24M>;
+        clock-names = "pclk", "pix", "phy_cfg", "phy_ref";
+        fsl,media-blk-ctrl = <&media_blk_ctrl>;
+        power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            video-mode = <2>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dsi_to_lcdif: endpoint {
+                    remote-endpoint = <&lcdif_to_dsi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 000000000000..07388bf2b90d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-ldb
+      - fsl,imx8mp-ldb
+      - fsl,imx93-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-ldb
+              - fsl,imx93-ldb
+    then:
+      properties:
+        ports:
+          properties:
+            port@2: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
index 9f7cc6b757cb..a44d025d33bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
@@ -79,4 +78,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 000000000000..84df3cf239d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
index dcb1336ee2a5..958a073f4ff7 100644
--- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+title: Intel Keem Bay mipi dsi controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
new file mode 100644
index 000000000000..b98d942bbe19
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6263 LVDS to HDMI converter
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS
+  to HDMI converter.  Combined with LVDS receiver and HDMI 1.4a transmitter,
+  the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
+  The built-in LVDS receiver can support single-link and dual-link LVDS inputs,
+  and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP
+  1.2 and backward compatible with DVI 1.0 specification.
+
+  The IT6263 also encodes and transmits up to 8 channels of I2S digital audio,
+  with sampling rate up to 192KHz and sample size up to 24 bits. In addition,
+  an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
+
+  The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is
+  provided by the IT6263 in two interfaces: the four I2S input ports or the
+  S/PDIF input port.  With both interfaces the highest possible HBR frame rate
+  is supported at up to 768KHz.
+
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    const: ite,it6263
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: audio master clock
+
+  clock-names:
+    const: mclk
+
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - jeida-30
+      - vesa-24
+      - vesa-30
+
+  reset-gpios:
+    maxItems: 1
+
+  ivdd-supply:
+    description: 1.8V digital logic power
+
+  ovdd-supply:
+    description: 3.3V I/O pin power
+
+  txavcc18-supply:
+    description: 1.8V HDMI analog frontend power
+
+  txavcc33-supply:
+    description: 3.3V HDMI analog frontend power
+
+  pvcc1-supply:
+    description: 1.8V HDMI frontend core PLL power
+
+  pvcc2-supply:
+    description: 1.8V HDMI frontend filter PLL power
+
+  avcc-supply:
+    description: 3.3V LVDS frontend power
+
+  anvdd-supply:
+    description: 1.8V LVDS frontend analog power
+
+  apvdd-supply:
+    description: 1.8V LVDS frontend PLL power
+
+  "#sound-dai-cells":
+    const: 0
+
+  ite,i2s-audio-fifo-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      Each array element indicates the pin number of an I2S serial data input
+      line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
+
+  ite,rl-channel-swap-audio-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      Each array element indicates an audio source whose right channel and left
+      channel are swapped by this converter. For I2S, the element is the pin
+      number of an I2S serial data input line. For S/PDIF, the element is always
+      0.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0: true
+
+      port@1:
+        oneOf:
+          - required: [dual-lvds-odd-pixels]
+          - required: [dual-lvds-even-pixels]
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: video port for the HDMI output
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: sound input port
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - data-mapping
+  - ivdd-supply
+  - ovdd-supply
+  - txavcc18-supply
+  - txavcc33-supply
+  - pvcc1-supply
+  - pvcc2-supply
+  - avcc-supply
+  - anvdd-supply
+  - apvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* single-link LVDS input */
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi@4c {
+            compatible = "ite,it6263";
+            reg = <0x4c>;
+            data-mapping = "jeida-24";
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            ivdd-supply = <&reg_buck5>;
+            ovdd-supply = <&reg_vext_3v3>;
+            txavcc18-supply = <&reg_buck5>;
+            txavcc33-supply = <&reg_vext_3v3>;
+            pvcc1-supply = <&reg_buck5>;
+            pvcc2-supply = <&reg_buck5>;
+            avcc-supply = <&reg_vext_3v3>;
+            anvdd-supply = <&reg_buck5>;
+            apvdd-supply = <&reg_buck5>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    it6263_lvds_link1: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    it6263_out: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+            };
+        };
+    };
+
+  - |
+    /* dual-link LVDS input */
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi@4c {
+            compatible = "ite,it6263";
+            reg = <0x4c>;
+            data-mapping = "jeida-24";
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            ivdd-supply = <&reg_buck5>;
+            ovdd-supply = <&reg_vext_3v3>;
+            txavcc18-supply = <&reg_buck5>;
+            txavcc33-supply = <&reg_vext_3v3>;
+            pvcc1-supply = <&reg_buck5>;
+            pvcc2-supply = <&reg_buck5>;
+            avcc-supply = <&reg_vext_3v3>;
+            anvdd-supply = <&reg_buck5>;
+            apvdd-supply = <&reg_buck5>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dual-lvds-odd-pixels;
+
+                    it6263_lvds_link1_dual: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dual-lvds-even-pixels;
+
+                    it6263_lvds_link2_dual: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch1>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    it6263_out_dual: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index 833d11b2303a..c4469f463978 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it6505 Device Tree Bindings
+title: ITE it6505
 
 maintainers:
   - Allen Chen <allen.chen@ite.com.tw>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 description: |
   The IT6505 is a high-performance DisplayPort 1.1a transmitter,
   fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
@@ -52,9 +55,52 @@ properties:
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
-  port:
-    $ref: /schemas/graph.yaml#/properties/port
-    description: A port node pointing to DPI host port node
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: A port node pointing to DPI host port node
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              link-frequencies:
+                minItems: 1
+                maxItems: 1
+                description: Allowed max link frequencies in Hz
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for DP output
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                uniqueItems: true
+                items:
+                  - enum: [ 0, 1 ]
+                  - const: 1
+                  - const: 2
+                  - const: 3
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -63,8 +109,9 @@ required:
   - interrupts
   - reset-gpios
   - extcon
+  - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -85,9 +132,24 @@ examples:
             reset-gpios = <&pio 179 1>;
             extcon = <&usbc_extcon>;
 
-            port {
-                it6505_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6505_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                        link-frequencies = /bits/ 64 <150000000>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6505_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                        data-lanes = <0 1>;
+                    };
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index 6ec1d5fbb8bc..17d1f97ce8c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it66121 HDMI bridge Device Tree Bindings
+title: ITE it66121 HDMI bridge
 
 maintainers:
   - Phong LE <ple@baylibre.com>
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The IT66121 is a high-performance and low-power single channel HDMI
@@ -17,7 +17,10 @@ description: |
 
 properties:
   compatible:
-    const: ite,it66121
+    enum:
+      - ite,it66121
+      - ite,it66122
+      - ite,it6610
 
   reg:
     maxItems: 1
@@ -38,6 +41,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -79,7 +85,10 @@ required:
   - interrupts
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 674891ee2f8e..2cef25215798 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -55,6 +55,27 @@ properties:
       - port@0
       - port@1
 
+  vcchdmipll-supply:
+    description: A 1.8V supply that powers the HDMI PLL.
+
+  vcchdmitx-supply:
+    description: A 1.8V supply that powers the HDMI TX part.
+
+  vcclvdspll-supply:
+    description: A 1.8V supply that powers the LVDS PLL.
+
+  vcclvdstx-supply:
+    description: A 1.8V supply that powers the LVDS TX part.
+
+  vccmipirx-supply:
+    description: A 1.8V supply that powers the MIPI RX part.
+
+  vccsysclk-supply:
+    description: A 1.8V supply that powers the SYSCLK.
+
+  vdd-supply:
+    description: A 1.8V supply that powers the digital part.
+
 required:
   - compatible
   - reg
@@ -67,7 +88,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c4 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 000000000000..9a6e9b25d14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
index 5b9d36f7af30..655db8cfdc25 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -69,7 +69,10 @@ required:
   - vcc-supply
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 1faae3e323a4..4f7d3e9cf0c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -39,7 +39,10 @@ properties:
           - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
           - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+              - ti,sn65lvds822  # For the SN65LVDS822 FlatLink LVDS Receiver
+              - ti,sn65lvds94 # For the SN65DS94 LVDS serdes
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
           - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
@@ -50,6 +53,7 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
@@ -67,7 +71,7 @@ properties:
                   - vesa-24
                 description: |
                   The color signals mapping order. See details in
-                  Documentation/devicetree/bindings/display/panel/lvds.yaml
+                  Documentation/devicetree/bindings/display/lvds.yaml
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -79,6 +83,14 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
@@ -86,21 +98,32 @@ properties:
 
   power-supply: true
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          const: lvds-decoder
-then:
-  properties:
-    ports:
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
       properties:
-        port@0:
+        ports:
           properties:
-            endpoint:
+            port@0:
               properties:
-                data-mapping: false
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
 
 required:
   - compatible
@@ -108,7 +131,6 @@ required:
 
 additionalProperties: false
 
-
 examples:
   - |
     lvds-encoder {
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
new file mode 100644
index 000000000000..dfa6ff6f115e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE B850v3 video bridge
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+   STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+   The video processing pipeline on the second output on the GE B850v3:
+
+   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+   Each bridge has a dedicated flash containing firmware for supporting the custom
+   design. The result is that, in this design, neither the STDP4028 nor the
+   STDP2690 behave as the stock bridges would. The compatible strings include the
+   suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+   the firmware specific for the GE B850v3.
+
+   The hardware do not provide control over the video processing pipeline, as the
+   two bridges behaves as a single one. The only interfaces exposed by the
+   hardware are EDID, HPD, and interrupts.
+
+properties:
+  compatible:
+    enum:
+      - megachips,stdp4028-ge-b850v3-fw
+      - megachips,stdp2690-ge-b850v3-fw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        description: sink port
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: source port
+        $ref: /schemas/graph.yaml#/properties/port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: megachips,stdp4028-ge-b850v3-fw
+    then:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@73 {
+            compatible = "megachips,stdp4028-ge-b850v3-fw";
+            reg = <0x73>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&lvds0_out>;
+                    };
+
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    endpoint {
+                        remote-endpoint = <&stdp2690_in>;
+                    };
+               };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
deleted file mode 100644
index 09e0a21f705e..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Drivers for the second video output of the GE B850v3:
-   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
-   STDP2690-ge-b850v3-fw bridges (DP-DP++)
-
-The video processing pipeline on the second output on the GE B850v3:
-
-   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
-
-Each bridge has a dedicated flash containing firmware for supporting the custom
-design. The result is that, in this design, neither the STDP4028 nor the
-STDP2690 behave as the stock bridges would. The compatible strings include the
-suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
-the firmware specific for the GE B850v3.
-
-The hardware do not provide control over the video processing pipeline, as the
-two bridges behaves as a single one. The only interfaces exposed by the
-hardware are EDID, HPD, and interrupts.
-
-stdp4028-ge-b850v3-fw required properties:
-  - compatible : "megachips,stdp4028-ge-b850v3-fw"
-  - reg : I2C bus address
-  - interrupts : one interrupt should be described here, as in
-    <0 IRQ_TYPE_LEVEL_HIGH>
-  - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-stdp2690-ge-b850v3-fw required properties:
-    compatible : "megachips,stdp2690-ge-b850v3-fw"
-  - reg : I2C bus address
-  - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-Example:
-
-&mux2_i2c2 {
-	clock-frequency = <100000>;
-
-	stdp4028@73 {
-		compatible = "megachips,stdp4028-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg = <0x73>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				stdp4028_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				stdp4028_out: endpoint {
-					remote-endpoint = <&stdp2690_in>;
-				};
-			};
-		};
-	};
-
-	stdp2690@72 {
-		compatible = "megachips,stdp2690-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg = <0x72>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				stdp2690_in: endpoint {
-					remote-endpoint = <&stdp4028_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				stdp2690_out: endpoint {
-					/* Connector for external display */
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml
new file mode 100644
index 000000000000..862ef441ac9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAM9X75 LVDS Controller
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Low Voltage Differential Signaling Controller (LVDSC) manages data
+  format conversion from the LCD Controller internal DPI bus to OpenLDI
+  LVDS output signals. LVDSC functions include bit mapping, balanced mode
+  management, and serializer.
+
+properties:
+  compatible:
+    const: microchip,sam9x75-lvds
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    lvds-controller@f8060000 {
+      compatible = "microchip,sam9x75-lvds";
+      reg = <0xf8060000 0x100>;
+      interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+      clock-names = "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index 350fb8f400f0..5952e6448ed4 100644
--- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -111,11 +111,27 @@ properties:
         unevaluatedProperties: false
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           DSI output port node to the panel or the next bridge
           in the chain
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
     required:
       - port@0
       - port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 000000000000..70ec70922c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 000000000000..3fce9e698ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
+    items:
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+          enum: [ 1, 2 ]
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+          maximum: 0xff
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
new file mode 100644
index 000000000000..235018a81e85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - parade,ps8622
+      - parade,ps8625
+
+  reg:
+    maxItems: 1
+
+  lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    description: Number of DP lanes to use.
+
+  use-external-pwm:
+    type: boolean
+    description: Backlight will be controlled by an external PWM.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to RST_ pin.
+
+  sleep-gpios:
+    maxItems: 1
+    description: GPIO connected to PD_ pin.
+
+  vdd12-supply: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DisplayPort input.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - sleep-gpios
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: parade,ps8622
+    then:
+      properties:
+        lane-count:
+          const: 1
+    else:
+      properties:
+        lane-count:
+          const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds-bridge@48 {
+            compatible = "parade,ps8625";
+            reg = <0x48>;
+            sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+            lane-count = <2>;
+            use-external-pwm;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dp_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt
deleted file mode 100644
index c989c3807f2b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ps8622.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ps8622-bridge bindings
-
-Required properties:
-	- compatible: "parade,ps8622" or "parade,ps8625"
-	- reg: first i2c address of the bridge
-	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
-	- reset-gpios: OF device-tree gpio specification for RST_ pin.
-
-Optional properties:
-	- lane-count: number of DP lanes to use
-	- use-external-pwm: backlight will be controlled by an external PWM
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@48 {
-		compatible = "parade,ps8622";
-		reg = <0x48>;
-		sleep-gpios = <&gpc3 6 1 0 0>;
-		reset-gpios = <&gpc3 1 1 0 0>;
-		lane-count = <1>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index cdaf7a7a8f88..5856450c5da7 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+title: MIPI DSI to eDP Video Format Converter
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   The PS8640 is a low power MIPI-to-eDP video format converter supporting
@@ -74,7 +73,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -120,4 +119,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba104d..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 000000000000..b95f10edd3a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
+      - renesas,r8a779h0-dsi-csi2-tx    # for V4M
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779g0-sysc.h>
+
+    dsi@fed80000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r8a779g0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+                 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+        clock-names = "fck", "dsi", "pll";
+        power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dsi0port1_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+
+        panel@0 {
+            reg = <0>;
+            compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c";
+            power-supply = <&vcc_lcd_reg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0port1_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 000000000000..5a99d9b9635e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+  up to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+          - renesas,r9a07g054-mipi-dsi # RZ/V2L
+      - const: renesas,rzg2l-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Sequence operation channel 0 interrupt
+      - description: Sequence operation channel 1 interrupt
+      - description: Video-Input operation channel 1 interrupt
+      - description: DSI Packet Receive interrupt
+      - description: DSI Fatal Error interrupt
+      - description: DSI D-PHY PPI interrupt
+      - description: Debug interrupt
+
+  interrupt-names:
+    items:
+      - const: seq0
+      - const: seq1
+      - const: vin1
+      - const: rcv
+      - const: ferr
+      - const: ppi
+      - const: debug
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D-PHY Escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi0: dsi@10850000 {
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10850000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi1: dsi@10860000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10860000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi1_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi1_in: endpoint {
+                    remote-endpoint = <&du_out_dsi1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi1_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
index 0c9785c8db51..e3ec697f89e7 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -38,6 +38,9 @@ properties:
   clock-names:
     maxItems: 2
 
+  resets:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -67,6 +70,7 @@ required:
   - reg
   - clocks
   - clock-names
+  - resets
   - interrupts
   - ports
 
@@ -85,6 +89,7 @@ examples:
         clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
         clock-names = "iahb", "isfr";
         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index acfc327f70a7..bb9dbfb9beaf 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -28,6 +28,7 @@ properties:
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
       - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
       - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
       - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
       - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
       - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
@@ -94,7 +95,6 @@ then:
   properties:
     clocks:
       minItems: 1
-      maxItems: 4
       items:
         - description: Functional clock
         - description: EXTAL input clock
@@ -103,7 +103,6 @@ then:
 
     clock-names:
       minItems: 1
-      maxItems: 4
       items:
         - const: fck
         # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
@@ -127,12 +126,10 @@ then:
 else:
   properties:
     clocks:
-      maxItems: 1
       items:
         - description: Functional clock
 
     clock-names:
-      maxItems: 1
       items:
         - const: fck
 
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 000000000000..ad279f0993fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,309 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |
+  Samsung MIPI DSIM bridge controller can be found it on Exynos
+  and i.MX8M Mini/Nano/Plus SoC's.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-mipi-dsi
+          - samsung,exynos4210-mipi-dsi
+          - samsung,exynos5410-mipi-dsi
+          - samsung,exynos5422-mipi-dsi
+          - samsung,exynos5433-mipi-dsi
+          - samsung,exynos7870-mipi-dsi
+          - fsl,imx8mm-mipi-dsim
+          - fsl,imx8mp-mipi-dsim
+      - items:
+          - enum:
+              - fsl,imx7d-mipi-dsim
+              - fsl,imx8mn-mipi-dsim
+          - const: fsl,imx8mm-mipi-dsim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+
+  samsung,phy-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: phandle to the samsung phy-type
+
+  power-domains:
+    maxItems: 1
+
+  samsung,power-domain:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the associated samsung power domain
+
+  vddcore-supply:
+    description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+  vddio-supply:
+    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+  samsung,burst-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM high speed burst mode frequency.  If absent,
+      the pixel clock from the attached device or bridge
+      will be used instead.
+
+  samsung,esc-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM escape mode frequency.
+
+  samsung,pll-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM oscillator clock frequency. If absent, the clock frequency
+      of sclk_mipi will be used instead.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsim
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
author	Linus Torvalds <torvalds@linux-foundation.org>	2025-12-10 07:48:05 +0900
committer	Linus Torvalds <torvalds@linux-foundation.org>	2025-12-10 07:48:05 +0900
commit	c9b47175e9131118e6f221cc8fb81397d62e7c91 (patch)
tree	ec9cf60ad95a2e8e13e73706287825ffe9ac20f6 /Documentation/devicetree/bindings/iio/multiplexer
parent	9d588a1140b9ae211581a7a154d0b806d8cd8238 (diff)
parent	d202341d9b0c5b5965787061ba0d10daafb9d6c5 (diff)