Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a brand new driver for touchpads and touchbars in newer Apple devices

 - support for Berlin-A series in goodix-berlin touchscreen driver

 - improvements to matrix_keypad driver to better handle GPIOs toggling

 - assorted small cleanups in other input drivers

* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix_berlin - add support for Berlin-A series
  dt-bindings: input: goodix,gt9916: Document gt9897 compatible
  dt-bindings: input: matrix_keypad - add wakeup-source property
  dt-bindings: input: matrix_keypad - add missing property
  Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
  Input: synaptics - hide unused smbus_pnp_ids[] array
  Input: apple_z2 - fix potential confusion in Kconfig
  Input: matrix_keypad - use fsleep for delays after activating columns
  Input: matrix_keypad - add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: convert to YAML
  dt-bindings: input: Correct indentation and style in DTS example
  MAINTAINERS: Add entries for Apple Z2 touchscreen driver
  Input: apple_z2 - add a driver for Apple Z2 touchscreens
  dt-bindings: input: touchscreen: Add Z2 controller
  Input: Switch to use hrtimer_setup()
  Input: drop vb2_ops_wait_prepare/finish

8 files changed, 232 insertions, 107 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10f0cd7..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible:		Should be "gpio-matrix-keypad"
-- row-gpios:		List of gpios used as row lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these row lines are connected.
-- col-gpios:		List of gpios used as column lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these column lines are connected.
-- linux,keymap:		The definition can be found at
-			bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat:	do no enable autorepeat feature.
-- wakeup-source:	use any event on keypad as wakeup event.
-			(Legacy property supported: "linux,wakeup")
-- debounce-delay-ms:	debounce interval in milliseconds
-- col-scan-delay-us:	delay, measured in microseconds, that is needed
-			before we can scan keypad after activating column gpio
-- drive-inactive-cols:	drive inactive columns during scan,
-			default is to turn inactive columns into inputs.
-
-Example:
-	matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio2 25 0
-			     &gpio2 26 0
-			     &gpio2 27 0>;
-
-		col-gpios = <&gpio2 21 0
-			     &gpio2 22 0>;
-
-		linux,keymap = <0x0000008B
-				0x0100009E
-				0x02000069
-				0x0001006A
-				0x0101001C
-				0x0201006C>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 000000000000..ebfff9e42a36
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+description:
+  GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+  The matrix keypad supports multiple row and column lines, a key can be
+  placed at each intersection of a unique row and a unique column. The matrix
+  keypad can sense a key-press and key-release by means of GPIO lines and
+  report the event using GPIO interrupts to the cpu.
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    const: gpio-matrix-keypad
+
+  row-gpios:
+    description:
+      List of GPIOs used as row lines. The gpio specifier for this property
+      depends on the gpio controller to which these row lines are connected.
+
+  col-gpios:
+    description:
+      List of GPIOs used as column lines. The gpio specifier for this property
+      depends on the gpio controller to which these column lines are connected.
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Do not enable autorepeat feature.
+
+  gpio-activelow:
+    type: boolean
+    description:
+      Force GPIO polarity to active low.
+      In the absence of this property GPIOs are treated as active high.
+
+  debounce-delay-ms:
+    description: Debounce interval in milliseconds.
+    default: 0
+
+  col-scan-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      before we can scan keypad after activating column gpio.
+    default: 0
+
+  all-cols-on-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      after activating all column gpios.
+    default: 0
+
+  drive-inactive-cols:
+    type: boolean
+    description:
+      Drive inactive columns during scan,
+      default is to turn inactive columns into inputs.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - row-gpios
+  - col-gpios
+  - linux,keymap
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix-keypad {
+        compatible = "gpio-matrix-keypad";
+        debounce-delay-ms = <5>;
+        col-scan-delay-us = <2>;
+
+        row-gpios = <&gpio2 25 0
+                     &gpio2 26 0
+                     &gpio2 27 0>;
+
+        col-gpios = <&gpio2 21 0
+                     &gpio2 22 0>;
+
+        linux,keymap = <0x0000008B
+                        0x0100009E
+                        0x02000069
+                        0x0001006A
+                        0x0101001C
+                        0x0201006C>;
+
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
index 88764adcd696..e03611eef93d 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
@@ -62,28 +62,28 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/input/input.h>
-   #include <dt-bindings/interrupt-controller/irq.h>
-   pmic {
-       #address-cells = <1>;
-       #size-cells = <0>;
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-       keypad@148 {
-           compatible = "qcom,pm8921-keypad";
-           reg = <0x148>;
-           interrupt-parent = <&pmicintc>;
-           interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
-           linux,keymap = <
-               MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-               MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-               MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-               MATRIX_KEY(0, 3, KEY_CAMERA)
-           >;
-           keypad,num-rows = <1>;
-           keypad,num-columns = <5>;
-           debounce = <15>;
-           scan-delay = <32>;
-           row-hold = <91500>;
-       };
-   };
+        keypad@148 {
+            compatible = "qcom,pm8921-keypad";
+            reg = <0x148>;
+            interrupt-parent = <&pmicintc>;
+            interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
+            linux,keymap = <
+                MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+                MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+                MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+                MATRIX_KEY(0, 3, KEY_CAMERA)
+            >;
+            keypad,num-rows = <1>;
+            keypad,num-columns = <5>;
+            debounce = <15>;
+            scan-delay = <32>;
+            row-hold = <91500>;
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
index 12c74c083258..64590894857a 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -52,24 +52,24 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/interrupt-controller/irq.h>
-   ssbi {
-     #address-cells = <1>;
-     #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-     pmic@0 {
-       reg = <0x0>;
-       #address-cells = <1>;
-       #size-cells = <0>;
+        pmic@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-       pwrkey@1c {
-         compatible = "qcom,pm8921-pwrkey";
-         reg = <0x1c>;
-         interrupt-parent = <&pmicint>;
-         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
-         debounce = <15625>;
-         pull-up;
-       };
-     };
-   };
+            pwrkey@1c {
+                compatible = "qcom,pm8921-pwrkey";
+                reg = <0x1c>;
+                interrupt-parent = <&pmicint>;
+                interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+                debounce = <15625>;
+                pull-up;
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
new file mode 100644
index 000000000000..402ca6bffd34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple touchscreens attached using the Z2 protocol
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: A series of touschscreen controllers used in Apple products
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - apple,j293-touchbar
+      - apple,j493-touchbar
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 1
+
+  apple,z2-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4096
+    description:
+      Calibration blob supplied by the bootloader
+
+required:
+  - compatible
+  - interrupts
+  - reset-gpios
+  - firmware-name
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "apple,j293-touchbar";
+            reg = <0>;
+            spi-max-frequency = <11500000>;
+            reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+            interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+            firmware-name = "apple/dfrmtfw-j293.bin";
+            touchscreen-size-x = <23045>;
+            touchscreen-size-y = <640>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
index d90f045ac06c..c40d92b7f4af 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -19,6 +19,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - goodix,gt9897
       - goodix,gt9916
 
   reg:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
index 604921733d2c..8f6335d7da1c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -164,20 +164,20 @@ examples:
         #size-cells = <0>;
 
         touchscreen@0 {
-           compatible = "ti,tsc2046";
-           reg = <0>;	/* CS0 */
-           interrupt-parent = <&gpio1>;
-           interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-           pendown-gpio = <&gpio1 8 0>;
-           spi-max-frequency = <1000000>;
-           vcc-supply = <&reg_vcc3>;
-           wakeup-source;
-
-           ti,pressure-max = /bits/ 16 <255>;
-           ti,x-max = /bits/ 16 <8000>;
-           ti,x-min = /bits/ 16 <0>;
-           ti,x-plate-ohms = /bits/ 16 <40>;
-           ti,y-max = /bits/ 16 <4800>;
-           ti,y-min = /bits/ 16 <0>;
-       };
+            compatible = "ti,tsc2046";
+            reg = <0>;	/* CS0 */
+            interrupt-parent = <&gpio1>;
+            interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+            pendown-gpio = <&gpio1 8 0>;
+            spi-max-frequency = <1000000>;
+            vcc-supply = <&reg_vcc3>;
+            wakeup-source;
+
+            ti,pressure-max = /bits/ 16 <255>;
+            ti,x-max = /bits/ 16 <8000>;
+            ti,x-min = /bits/ 16 <0>;
+            ti,x-plate-ohms = /bits/ 16 <40>;
+            ti,y-max = /bits/ 16 <4800>;
+            ti,y-min = /bits/ 16 <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 27f1797be963..66bb016305f9 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -23,7 +23,7 @@ List of legacy properties and respective binding document
 
 1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
 2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
-3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml