Merge tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These are mostly assorted updates of thermal drivers used on ARM
  platforms:

   - Use dev_err_probe() helpers to simplify the init code in the Qoriq
     thermal driver (Frank Li)

   - Power down the Qoriq's TMU at suspend time (Alice Guo)

   - Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
     and TSENS enable / calibration support for V2 (Praveenkumar I)

   - Add missing rk3328 mapping entry (Trevor Woerner)

   - Remove duplicate struct declaration from the thermal core header
     file (Xueqin Luo)

   - Disable the monitoring mode during suspend in the LVTS Mediatek
     driver to prevent temperature acquisition glitches (Nícolas F. R.
     A. Prado)

   - Disable Stage 3 thermal threshold in the LVTS Mediatek driver
     because it disables the suspend ability and does not have an
     interrupt handler (Nícolas F. R. A. Prado)

   - Fix low temperature offset interrupt in the LVTS Mediatek driver to
     prevent multiple interrupts from triggering when the system is at
     its normal functionning temperature (Nícolas F. R. A. Prado)

   - Enable interrupts in the LVTS Mediatek driver only on sensors that
     are in use (Nícolas F. R. A. Prado)

   - Add the BCM74110 compatible DT binding and the corresponding code
     to support a chip based on a different process node than previous
     chips (Florian Fainelli)

   - Correct indentation and style in DTS example (Krzysztof Kozlowski)

   - Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
     Söderlund)

   - Factor out the code logic to read fuses on Gen3 and Gen4 in the
     rcar_gen3 thermal driver (Niklas Söderlund)

   - Drop unused driver data from the QCom's spmi temperature alarm
     driver (Johan Hovold)"

* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
  thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
  thermal: rcar_gen3: Use lowercase hex constants
  dt-bindings: thermal: Correct indentation and style in DTS example
  thermal/drivers/brcmstb_thermal: Add support for BCM74110
  dt-bindings: thermal: Update for BCM74110
  thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
  thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
  thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
  thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
  thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
  thermal: core: Remove duplicate struct declaration
  thermal/drivers/rockchip: Add missing rk3328 mapping entry
  thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
  thermal/drivers/qoriq: Power down TMU on system suspend
  thermal/drivers/qoriq: Use dev_err_probe() simplify the code

5 files changed, 67 insertions, 48 deletions

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index dad8de900495..3e61689f6dd4 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -142,38 +142,38 @@ unevaluatedProperties: false
 examples:
   - |
     thermal-sensor@1f04000 {
-         compatible = "allwinner,sun8i-a83t-ths";
-         reg = <0x01f04000 0x100>;
-         interrupts = <0 31 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <1>;
+        compatible = "allwinner,sun8i-a83t-ths";
+        reg = <0x01f04000 0x100>;
+        interrupts = <0 31 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     thermal-sensor@1c25000 {
-         compatible = "allwinner,sun8i-h3-ths";
-         reg = <0x01c25000 0x400>;
-         clocks = <&ccu 0>, <&ccu 1>;
-         clock-names = "bus", "mod";
-         resets = <&ccu 2>;
-         interrupts = <0 31 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <0>;
+        compatible = "allwinner,sun8i-h3-ths";
+        reg = <0x01c25000 0x400>;
+        clocks = <&ccu 0>, <&ccu 1>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 2>;
+        interrupts = <0 31 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <0>;
     };
 
   - |
     thermal-sensor@5070400 {
-         compatible = "allwinner,sun50i-h6-ths";
-         reg = <0x05070400 0x100>;
-         clocks = <&ccu 0>;
-         clock-names = "bus";
-         resets = <&ccu 2>;
-         interrupts = <0 15 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <1>;
+        compatible = "allwinner,sun50i-h6-ths";
+        reg = <0x05070400 0x100>;
+        clocks = <&ccu 0>;
+        clock-names = "bus";
+        resets = <&ccu 2>;
+        interrupts = <0 15 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <1>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
index 081486b44382..2f62551a49c1 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     items:
       - enum:
+          - brcm,avs-tmon-bcm74110
           - brcm,avs-tmon-bcm7216
           - brcm,avs-tmon-bcm7445
       - const: brcm,avs-tmon
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index 337560562337..949b154856c5 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -80,19 +80,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     efuse@21bc000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "fsl,imx6sx-ocotp", "syscon";
-         reg = <0x021bc000 0x4000>;
-         clocks = <&clks IMX6SX_CLK_OCOTP>;
-
-         tempmon_calib: calib@38 {
-             reg = <0x38 4>;
-         };
-
-         tempmon_temp_grade: temp-grade@20 {
-             reg = <0x20 4>;
-         };
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "fsl,imx6sx-ocotp", "syscon";
+        reg = <0x021bc000 0x4000>;
+        clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+        tempmon_calib: calib@38 {
+            reg = <0x38 4>;
+        };
+
+        tempmon_temp_grade: temp-grade@20 {
+            reg = <0x20 4>;
+        };
     };
 
     anatop@20c8000 {
@@ -103,12 +103,12 @@ examples:
                      <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
         tempmon {
-             compatible = "fsl,imx6sx-tempmon";
-             interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-             fsl,tempmon = <&anatop>;
-             nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-             nvmem-cell-names = "calib", "temp_grade";
-             clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-             #thermal-sensor-cells = <0>;
+            compatible = "fsl,imx6sx-tempmon";
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
index bef0e95e7416..df6c7c5d519f 100644
--- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -63,10 +63,10 @@ examples:
     #include <dt-bindings/clock/imx8mm-clock.h>
 
     thermal-sensor@30260000 {
-         compatible = "fsl,imx8mm-tmu";
-         reg = <0x30260000 0x10000>;
-         clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
-         #thermal-sensor-cells = <0>;
+        compatible = "fsl,imx8mm-tmu";
+        reg = <0x30260000 0x10000>;
+        clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+        #thermal-sensor-cells = <0>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index b9829bb22cc0..f9d8012c8cf5 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -75,6 +75,8 @@ properties:
 
       - description: v2 of TSENS with combined interrupt
         enum:
+          - qcom,ipq5332-tsens
+          - qcom,ipq5424-tsens
           - qcom,ipq8074-tsens
 
       - description: v2 of TSENS with combined interrupt
@@ -212,6 +214,18 @@ properties:
           - const: s9_p2_backup
           - const: s10_p1_backup
           - const: s10_p2_backup
+      - minItems: 8
+        items:
+          - const: mode
+          - const: base0
+          - const: base1
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
+          - pattern: '^tsens_sens[0-9]+_off$'
 
   "#qcom,sensors":
     description:
@@ -271,6 +285,8 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5332-tsens
+              - qcom,ipq5424-tsens
               - qcom,ipq8074-tsens
     then:
       properties:
@@ -286,6 +302,8 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5332-tsens
+              - qcom,ipq5424-tsens
               - qcom,ipq8074-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1