diff options
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 11 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 26 |
2 files changed, 26 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 96fa26365248..1a8dd23eda33 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -43,13 +43,6 @@ }; &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { - pinctrl-single,pins = < - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ - >; - }; - main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ @@ -146,10 +139,6 @@ }; &main_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - exp1: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index fbd17d38f6b6..7b5e9aa0324e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -48,6 +48,15 @@ }; }; +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ + J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ + >; + }; +}; + &hbmc { /* OSPI and HBMC are muxed inside FSS, Bootloader will enable * appropriate node based on board detection @@ -131,3 +140,20 @@ &mailbox0_cluster11 { status = "disabled"; }; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp_som: gpio@21 { + compatible = "ti,tca6408"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0", + "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1", + "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL", + "GPIO_LIN_EN", "CAN_STB"; + }; +}; |