diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/coretemp.c | 17 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/zl6100.c | 12 | ||||
| -rw-r--r-- | drivers/hwmon/tmp401.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/via-cputemp.c | 16 | ||||
| -rw-r--r-- | drivers/hwmon/w83627ehf.c | 17 |
5 files changed, 37 insertions, 27 deletions
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index a6c6ec36615e..249ac460e3d9 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -39,6 +39,7 @@ #include <linux/moduleparam.h> #include <asm/msr.h> #include <asm/processor.h> +#include <asm/cpu_device_id.h> #define DRVNAME "coretemp" @@ -759,13 +760,23 @@ static struct notifier_block coretemp_cpu_notifier __refdata = { .notifier_call = coretemp_cpu_callback, }; +static const struct x86_cpu_id coretemp_ids[] = { + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); + static int __init coretemp_init(void) { int i, err = -ENODEV; - /* quick check if we run Intel */ - if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL) - goto exit; + /* + * CPUID.06H.EAX[0] indicates whether the CPU has thermal + * sensors. We check this bit only, all the early CPUs + * without thermal sensors will be filtered out. + */ + if (!x86_match_cpu(coretemp_ids)) + return -ENODEV; err = platform_driver_register(&coretemp_driver); if (err) diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 880b90cf4d32..e3e8420b7b81 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -200,17 +200,11 @@ static int zl6100_probe(struct i2c_client *client, data->id = mid->driver_data; /* - * ZL2005, ZL2008, ZL2105, and ZL6100 are known to require a wait time - * between I2C accesses. ZL2004 and ZL6105 are known to be safe. - * Other chips have not yet been tested. - * - * Only clear the wait time for chips known to be safe. The wait time - * can be cleared later for additional chips if tests show that it - * is not needed (in other words, better be safe than sorry). + * According to information from the chip vendor, all currently + * supported chips are known to require a wait time between I2C + * accesses. */ data->delay = delay; - if (data->id == zl2004 || data->id == zl6105) - data->delay = 0; /* * Since there was a direct I2C device access above, wait before diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 8b9a77486d57..951442adc067 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -624,7 +624,7 @@ static int tmp401_probe(struct i2c_client *client, goto exit_remove; } - /* Register aditional tmp411 sysfs hooks */ + /* Register additional tmp411 sysfs hooks */ if (data->kind == tmp411) { for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) { err = device_create_file(&client->dev, diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index 8eac67d769fa..8689664ef03c 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -37,6 +37,7 @@ #include <linux/cpu.h> #include <asm/msr.h> #include <asm/processor.h> +#include <asm/cpu_device_id.h> #define DRVNAME "via_cputemp" @@ -308,15 +309,20 @@ static struct notifier_block via_cputemp_cpu_notifier __refdata = { .notifier_call = via_cputemp_cpu_callback, }; +static const struct x86_cpu_id cputemp_ids[] = { + { X86_VENDOR_CENTAUR, 6, 0xa, }, /* C7 A */ + { X86_VENDOR_CENTAUR, 6, 0xd, }, /* C7 D */ + { X86_VENDOR_CENTAUR, 6, 0xf, }, /* Nano */ + {} +}; +MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); + static int __init via_cputemp_init(void) { int i, err; - if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) { - printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n"); - err = -ENODEV; - goto exit; - } + if (!x86_match_cpu(cputemp_ids)) + return -ENODEV; err = platform_driver_register(&via_cputemp_driver); if (err) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 5276d1933dbc..a658d62c5e10 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -39,7 +39,7 @@ 0x8860 0xa1 w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 - w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3 + w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3 @@ -1607,7 +1607,7 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ val = step_time_to_reg(val, data->pwm_mode[nr]); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ + w83627ehf_write_value(data, data->REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } \ @@ -2004,7 +2004,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) goto exit; } - data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL); + data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data), + GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit_release; @@ -2157,16 +2158,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) w83627ehf_set_temp_reg_ehf(data, 3); /* - * Temperature sources for temp1 and temp2 are selected with + * Temperature sources for temp2 and temp3 are selected with * bank 0, registers 0x49 and 0x4a. */ data->temp_src[0] = 0; /* SYSTIN */ reg = w83627ehf_read_value(data, 0x49) & 0x07; /* Adjust to have the same mapping as other source registers */ if (reg == 0) - data->temp_src[1]++; + data->temp_src[1] = 1; else if (reg >= 2 && reg <= 5) - data->temp_src[1] += 2; + data->temp_src[1] = reg + 2; else /* should never happen */ data->have_temp &= ~(1 << 1); reg = w83627ehf_read_value(data, 0x4a); @@ -2493,9 +2494,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) exit_remove: w83627ehf_device_remove_files(dev); - kfree(data); - platform_set_drvdata(pdev, NULL); exit_release: + platform_set_drvdata(pdev, NULL); release_region(res->start, IOREGION_LENGTH); exit: return err; @@ -2509,7 +2509,6 @@ static int __devexit w83627ehf_remove(struct platform_device *pdev) w83627ehf_device_remove_files(&pdev->dev); release_region(data->addr, IOREGION_LENGTH); platform_set_drvdata(pdev, NULL); - kfree(data); return 0; } |
