Age | Commit message (Collapse) | Author |
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
- Fix for a regression introduced in this cycle with error checking for
batched request completions (Shin'ichiro)
* tag 'block-6.14-20250313' of git://git.kernel.dk/linux:
block: change blk_mq_add_to_batch() third argument type to bool
nvme: move error logging from nvme_end_req() to __nvme_end_req()
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support.
The diff is a bit larger than I'd prefer at this point due to
unwinding the amd/pmf driver's error handling properly instead of
calling a deinit function that was a can full of worms.
Summary:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11"
* tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update Ike Panhc's email address
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
platform/surface: aggregator_registry: Add Support for Surface Pro 11
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"The first fix is a backport from my v6.15-rc1 queue that turned out to
be needed in v6.14 as well but as the former diverged from my fixes
branch I had to adjust the patch a bit.
The second one fixes a regression observed in user-space where closing
a file descriptor associated with a GPIO device results in a ~10ms
delay due to the atomic notifier calling rcu_synchronize() when
unregistering.
Summary:
- don't check the return value of gpio_chip::get_direction() when
registering a GPIO chip
- use raw notifier for line state events"
* tag 'gpio-fixes-for-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: cdev: use raw notifier for line state events
gpiolib: don't check the retval of get_direction() when registering a chip
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of last-minute fixes.
Most of them are for ASoC, and the only one core fix is for reverting
the previous change, while the rest are all device-specific quirks and
fixes, which should be relatively safe to apply"
* tag 'sound-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPS
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()
ASoC: rt722-sdca: add missing readable registers
ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model
ASoC: cs42l43: Fix maximum ADC Volume
ASoC: ops: Consistently treat platform_max as control value
ASoC: rt1320: set wake_capable = 0 explicitly
ASoC: cs42l43: Add jack delay debounce after suspend
ASoC: tegra: Fix ADX S24_LE audio format
ASoC: codecs: wsa884x: report temps to hwmon in millidegree of Celsius
ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in create_sdw_dailinks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is a horrible macro fix for our TLB flushing code which
resulted in over-invalidation on the MMU notifier path.
Summary:
- Fix population of the vmemmap for regions of memory that are
smaller than a section (128 MiB)
- Fix range-based TLB over-invalidation when invoked via a MMU
notifier"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Fix mmu notifiers for range-based invalidates
arm64: mm: Populate vmemmap at the page level if not section aligned
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the bootup of SEV-SNP enabled guests under VMware hypervisors"
* tag 'x86-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Parse MP tables for SEV-SNP enabled guests under VMware hypervisors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a sleeping-while-atomic bug caused by a recent optimization
utilizing static keys that didn't consider that the
static_key_disable() call could be triggered in atomic context.
Revert the optimization"
* tag 'sched-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Don't define sched_clock_irqtime as static key
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc locking fixes from Ingo Molnar:
- Restrict the Rust runtime from unintended access to dynamically
allocated LockClassKeys
- KernelDoc annotation fix
- Fix a lock ordering bug in semaphore::up(), related to trying to
printk() and wake up the console within critical sections
* tag 'locking-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/semaphore: Use wake_q to wake up processes outside lock critical section
locking/rtmutex: Use the 'struct' keyword in kernel-doc comment
rust: lockdep: Remove support for dynamically allocated LockClassKeys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a Sparse false positive warning triggered by no_free_ptr()"
* tag 'core-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
<linux/cleanup.h>: Allow the passing of both iomem and non-iomem pointers to no_free_ptr()
|
|
Chips in the DA850 family need to have ARCH_DAVINCI_DA8XX to be selected
in order to enable some peripheral drivers.
This was accidentally removed in a previous commit.
Fixes: dec85a95167a ("ARM: davinci: clean up platform support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/fixes
Reset controller fixes for v6.14
* Fix lan966x boot with internal CPU by stopping reset-microchip-sparx5
from indirectly calling devm_request_mem_region() on a memory region
shared with other devices.
* tag 'reset-fixes-for-v6.14' of git://git.pengutronix.de/pza/linux:
reset: mchp: sparx5: Fix for lan966x
Link: https://lore.kernel.org/r/20250314164401.743984-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
String assembly should use sysfs_emit_at() instead of sysfs_emit().
Fixes: 23fe8112a231 ("soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250314100143.3377268-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.14
- Fix possible misalignment breaking SMP bring-up.
* tag 'renesas-fixes-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
Link: https://lore.kernel.org/r/cover.1741785482.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 Devicetree fixes for v6.14
Revert the change to marking SDM845 SMMU dma-coherent, as this is
reported not to be true.
* tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu"
Link: https://lore.kernel.org/r/20250310191409.1208520-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We are no longer depending on legacy device trees so
drop the no compatible check for NAND and OneNAND
nodes.
Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250114-omap-gpmc-drop-no-compatible-check-v1-1-262c8d549732@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/AsahiLinux/linux into arm/fixes
Two updates to our ARM/APPLE MACHINE SUPPORT section in MAINTAINERS:
- Added Neal Gompa as reviewer
- Added the files for our SPI controller driver
* tag 'asahi-soc-maintainers-6.14-fixes' of https://github.com/AsahiLinux/linux:
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
MAINTAINERS: Add apple-spi driver & binding files
Link: https://lore.kernel.org/r/20250309194926.51824-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of emmc fixes (removing CQE from Theobroma boards and slower
freq on Rock-5-ITX) as well as some pinmux fixes and missing supplies.
* tag 'v6.14-rockchip-dtsfixes2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: rockchip: remove supports-cqe from rk3588 tiger
arm64: dts: rockchip: remove supports-cqe from rk3588 jaguar
Link: https://lore.kernel.org/r/1990830.tdWV9SEqCh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These are u64 variables that come from the user via
qaic_attach_slice_bo_ioctl(). Use check_add_overflow() to ensure that
the math doesn't have an integer wrapping bug.
Cc: stable@vger.kernel.org
Fixes: ff13be830333 ("accel/qaic: Add datapath")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/176388fa-40fe-4cb4-9aeb-2c91c22130bd@stanley.mountain
|
|
When slicing a BO, we need to iterate through the BO's sgt to find the
right pieces to construct the slice. Some of the data types chosen for
this process are incorrectly too small, and can overflow. This can
result in the incorrect slice construction, which can lead to data
corruption in workload execution.
The device can only handle 32-bit sized transfers, and the scatterlist
struct only supports 32-bit buffer sizes, so our upper limit for an
individual transfer is an unsigned int. Using an int is incorrect due to
the reservation of the sign bit. Upgrade the length of a scatterlist
entry and the offsets into a scatterlist entry to unsigned int for a
correct representation.
While each transfer may be limited to 32-bits, the overall BO may exceed
that size. For counting the total length of the BO, we need a type that
can represent the largest allocation possible on the system. That is the
definition of size_t, so use it.
Fixes: ff13be830333 ("accel/qaic: Add datapath")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306171959.853466-1-jeff.hugo@oss.qualcomm.com
|
|
We just had a report of the assert for "btree in write buffer for
non-write buffer btree" popping during the 6.14 upgrade.
- 150TB filesystem, after a reboot the upgrade was able to continue from
where it left off, so no major damage.
But with 6.14 about to come out we want to get this tracked down asap,
and need more data if other users hit this.
Convert the BUG_ON() to an emergency read-only, and print out btree, the
key itself, and stack trace from the original write buffer update (which
did not have this check before).
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Holding the pte lock for the page that is being converted to secure is
needed to avoid races. A previous commit removed the locking, which
caused issues. Fix by locking the pte again.
Fixes: 5cbe24350b7d ("KVM: s390: move pv gmap functions into kvm")
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[david@redhat.com: replace use of get_locked_pte() with folio_walk_start()]
Link: https://lore.kernel.org/r/20250312184912.269414-2-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250312184912.269414-2-imbrenda@linux.ibm.com>
|
|
I am no longer at Canonical and update with my personal email address.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20250314045732.389973-1-ike.pan@canonical.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.
A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().
Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cddc ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
system PM"
In this series Haibo Chen fixes several shortcomings of the suspend
and resume functions of the flexcan driver.
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
During system PM, if no wakeup requirement, disable transceiver to
save power.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-2-haibo.chen@nxp.com
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.
When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.
So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.
Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Fix NULL pointer in STMicroelectronics LED1202 LED support
* tag 'leds-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: leds-st1202: Fix NULL pointer access on race condition
|
|
Biju Das <biju.das.jz@bp.renesas.com> says:
This patch series addresses 2 issues
1) Fix typo in pattern properties for R-Car V4M.
2) Fix page entries in the AFL list.
v2->v3:
* Collected tags.
* Dropped unused variables cfg and start from
rcar_canfd_configure_afl_rules().
* Link to v2: https://lore.kernel.org/all/20250220094516.126598-1-biju.das.jz@bp.renesas.com
v1->v2:
* Split fixes patches as separate series.
* Added Rb tag from Geert for binding patch.
* Added the tag Cc:stable@vger.kernel.org
Link: https://patch.msgid.link/20250307170330.173425-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There are a total of 96 AFL pages and each page has 16 entries with
registers CFDGAFLIDr, CFDGAFLMr, CFDGAFLP0r, CFDGAFLP1r holding
the rule entries (r = 0..15).
Currently, RCANFD_GAFL* macros use a start variable to find AFL entries,
which is incorrect as the testing on RZ/G3E shows ch1 and ch4
gets a start value of 0 and the register contents are overwritten.
Fix this issue by using rule_entry corresponding to the channel
to find the page entries in the AFL list.
Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250307170330.173425-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
R-Car V4M
The Renesas R-Car V4M(R8A779H0) SoC, supports up to four channels.
Fix the typo 5->4 in pattern properties.
Fixes: ced52c6ed257 ("dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250307170330.173425-2-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In can_send() and can_receive() CAN messages and CAN filter matches are
counted to be visible in the CAN procfs files.
KCSAN detected a data race within can_send() when two CAN frames have
been generated by a timer event writing to the same CAN netdevice at the
same time. Use atomic operations to access the statistics in the hot path
to fix the KCSAN complaint.
Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes pull, the usual leaders in amdgpu/xe, a couple of
i915, and some scattered misc fixes.
panic:
- two clippy fixes
dp_mst
- locking fix
atomic:
- fix redundant DPMS calls
i915:
- Do cdclk post plane programming later
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support
xe:
- Release guc ids before cancelling work
- Fix new warnings around userptr
- Temporaritly disable D3Cold on BMG
- Retry and wait longer for GuC PC to start
- Remove redundant check in xe_vm_create_ioctl
amdgpu:
- GC 12.x DCC fix
- DC DCE 6.x fix
- Hibernation fix
- HPD fix
- Backlight fixes
- Color depth fix
- UAF fix in hdcp_work
- VCE 2.x fix
- GC 12.x PTE fix
amdkfd:
- Queue eviction fix
gma500:
- fix NULL pointer check"
* tag 'drm-fixes-2025-03-14' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags
drm/amd/amdkfd: Evict all queues even HWS remove queue failed
drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps
drm/dp_mst: Fix locking when skipping CSN before topology probing
drm/amdgpu/vce2: fix ip block reference
drm/amd/display: Fix slab-use-after-free on hdcp_work
drm/amd/display: Assign normalized_pix_clk when color depth = 14
drm/amd/display: Restore correct backlight brightness after a GPU reset
drm/amd/display: fix default brightness
drm/amd/display: Disable unneeded hpd interrupts during dm_init
drm/amd: Keep display off while going into S4
drm/amd/display: fix missing .is_two_pixels_per_container
drm/amdgpu/display: Allow DCC for video formats on GFX12
drm/xe: remove redundant check in xe_vm_create_ioctl()
drm/atomic: Filter out redundant DPMS calls
drm/xe/guc_pc: Retry and wait longer for GuC PC start
drm/xe/pm: Temporarily disable D3Cold on BMG
drm/i915/cdclk: Do cdclk post plane programming later
drm/xe/userptr: Fix an incorrect assert
drm/xe: Release guc ids before cancelling work
...
|
|
Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).
Let's consider below buffers:
dest[len + 1]; /* will be NUL terminated */
src[len]; /* may not be NUL terminated */
When doing:
strncpy(dest, src, len);
dest[len] = '\0';
strncpy() will read up to len bytes from src.
On the other hand:
strscpy(dest, src, len + 1);
will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.
This exact pattern happened in ucan.
The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.
On top of this do a couple refactors:
- ucan_ctl_payload->raw is only used for the firmware string, so
rename it to ucan_ctl_payload->fw_str and change its type from u8 to
char.
- ucan_device_request_in() is only used to retrieve the firmware
string, so rename it to ucan_get_fw_str() and refactor it to make it
directly handle all the string termination logic.
Reported-by: syzbot+d7d8c418e8317899e88c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/67b323a4.050a0220.173698.002b.GAE@google.com/
Fixes: 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250218143515.627682-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
run_state_machine()
A subtle error got introduced while manually fixing merge conflict in
tcpm.c for commit 85c4efbe6088 ("Merge v6.12-rc6 into usb-next"). As a
result of this error, the next state is unconditionally set to
SNK_WAIT_CAPABILITIES_TIMEOUT while handling SNK_WAIT_CAPABILITIES state
in run_state_machine(...).
Fix this by setting new state of TCPM state machine to `upcoming_state`
(that is set to different values based on conditions).
Cc: stable@vger.kernel.org
Fixes: 85c4efbe60888 ("Merge v6.12-rc6 into usb-next")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250310-fix-snk-wait-timeout-v6-14-rc6-v1-1-5db14475798f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.14-rc7
Here are some new modem device ids and a couple of related fixes, and
support for Altera USB Blaster 3.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.14-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
USB: serial: option: fix Telit Cinterion FE990A name
USB: serial: option: add Telit Cinterion FE990B compositions
USB: serial: option: match on interface class for Telit FN990B
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release guc ids before cancelling work (Tejas)
- Fix new warnings around userptr (Thomas)
- Temporaritly disable D3Cold on BMG (Rodrigo)
- Retry and wait longer for GuC PC to start (Rodrigo)
- Remove redundant check in xe_vm_create_ioctl (Xin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9MJWeIlZPuvXZ_G@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Do cdclk post plane programming later (Ville)
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support (Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9MG4fH-6Q8dTHE1@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for Samsung and Qualcomm clk drivers:
- Suspend on Google GS101 crashes when trying to save some clk
registers that we shouldn't be saving so we don't do that anymore
- The PLL lock time was wrong on the Tesla FSD which could lead to
the PLL never locking
- Qualcomm's display clk controller on SM8750 was trying to change
the frequency of a parent clk for the DSI device when it should
have stopped and adjusted the divider. The failure is that the clk
frequency was half what was expected, leading to broken display"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent
|
|
Pull bcachefs fixes from Kent Overstreet:
"Roxana caught an unitialized value that might explain some of the
rebalance weirdness we're still tracking down - cool.
Otherwise pretty minor"
* tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs:
bcachefs: bch2_get_random_u64_below()
bcachefs: target_congested -> get_random_u32_below()
bcachefs: fix tiny leak in bch2_dev_add()
bcachefs: Make sure trans is unlocked when submitting read IO
bcachefs: Initialize from_inode members for bch_io_opts
bcachefs: Fix b->written overflow
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A null pointer check for gma500, two clippy fixes for panic, a fix for
an interaction between DPMS and atomic leading to dropped frames, and
a locking fix for dp_mst
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-holistic-clay-moose-fead28@houat
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-12:
amdgpu:
- GC 12.x DCC fix
- DC DCE 6.x fix
- Hibernation fix
- HPD fix
- Backlight fixes
- Color depth fix
- UAF fix in hdcp_work
- VCE 2.x fix
- GC 12.x PTE fix
amdkfd:
- Queue eviction fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312190931.216506-1-alexander.deucher@amd.com
|
|
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference.
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Similar to commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to
NULL after job completion"), ensure the job pointer is set to `NULL` when
a job's fence has an error. Failing to do so can trigger kernel warnings
in specific scenarios, such as:
1. v3d_csd_job_run() assigns `v3d->csd_job = job`
2. CSD job exceeds hang limit, causing a timeout → v3d_gpu_reset_for_timeout()
3. GPU reset
4. drm_sched_resubmit_jobs() sets the job's fence to `-ECANCELED`.
5. v3d_csd_job_run() detects the fence error and returns NULL, not
submitting the job to the GPU
6. User-space runs `modprobe -r v3d`
7. v3d_gem_destroy()
v3d_gem_destroy() triggers a warning indicating that the CSD job never
ended, as we didn't set `v3d->csd_job` to NULL after the timeout. The same
can also happen to BIN, RENDER, and TFU jobs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-2-c1e780d8e096@igalia.com
|
|
The V3D driver still relies on `drm_sched_increase_karma()` and
`drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs.
The function `drm_sched_increase_karma()` marks the job as guilty, while
`drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of
that guilty job.
Because of this, we must check whether the job’s DMA fence has been
flagged with an error before executing the job. Otherwise, the same guilty
job may be resubmitted indefinitely, causing repeated GPU resets.
This patch adds a check for an error on the job's fence to prevent running
a guilty job that was previously flagged when the GPU timed out.
Note that the CPU and CACHE_CLEAN queues do not require this check, as
their jobs are executed synchronously once the DRM scheduler starts them.
Cc: stable@vger.kernel.org
Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.")
Fixes: 1584f16ca96e ("drm/v3d: Add support for submitting jobs to the TFU.")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com
|
|
Under VMware hypervisors, SEV-SNP enabled VMs are fundamentally able to boot
without UEFI, but this regressed a year ago due to:
0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
In this case, mpparse_find_mptable() has to be called to parse MP
tables which contains the necessary boot information.
[ mingo: Updated the changelog. ]
Fixes: 0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
Co-developed-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ye Li <ye.li@broadcom.com>
Reviewed-by: Kevin Loughlin <kevinloughlin@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250313173111.10918-1-ajay.kaher@broadcom.com
|