summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-13Merge tag 'for-6.14-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix stale page cache after race between readahead and direct IO write - fix hole expansion when writing at an offset beyond EOF, the range will not be zeroed - use proper way to calculate offsets in folio ranges * tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix hole expansion when writing at an offset beyond EOF btrfs: fix stale page cache after race between readahead and direct IO write btrfs: fix two misuses of folio_shift()
2025-02-13Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: "Just small stuff. As a general announcement, on disk format is now frozen in my master branch - future on disk format changes will be optional, not required. - More fixes for going read-only: the previous fix was insufficient, but with more work on ordering journal reclaim flushing (and a btree node accounting fix so we don't split until we have to) the tiering_replication test now consistently goes read-only in less than a second. - fix for fsck when we have reflink pointers to missing indirect extents - some transaction restart handling fixes from Alan; the "Pass _orig_restart_count to trans_was_restarted" likely fixes some rare undefined behaviour heisenbugs" * tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs: bcachefs: Reuse transaction bcachefs: Pass _orig_restart_count to trans_was_restarted bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS bcachefs: Fix want_new_bset() so we write until the end of the btree node bcachefs: Split out journal pins by btree level bcachefs: Fix use after free bcachefs: Fix marking reflink pointers to missing indirect extents
2025-02-13KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()Marc Zyngier
If userspace creates vcpus, then a vgic, we end-up in a situation where irqchip_in_kernel() will return true, but no private interrupt has been allocated for these vcpus. This situation will continue until userspace initialises the vgic, at which point we fix the early vcpus. Should a vcpu run or be initialised in the interval, bad things may happen. An obvious solution is to move this fix-up phase to the point where the vgic is created. This ensures that from that point onwards, all vcpus have their private interrupts, as new vcpus will directly allocate them. With that, we have the invariant that when irqchip_in_kernel() is true, all vcpus have their private interrupts. Reported-by: Alexander Potapenko <glider@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250212182558.2865232-3-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: timer: Drop warning on failed interrupt signallingMarc Zyngier
We currently spit out a warning if making a timer interrupt pending fails. But not only this is loud and easy to trigger from userspace, we also fail to do anything useful with that information. Dropping the warning is the easiest thing to do for now. We can always add error reporting if we really want in the future. Reported-by: Alexander Potapenko <glider@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250212182558.2865232-2-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13net: pse-pd: Fix deadlock in current limit functionsKory Maincent
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit caused by consecutive mutex_lock calls. One in the function itself and another in pse_pi_get_voltage. Resolve the issue by using the unlocked version of pse_pi_get_voltage instead. Fixes: e0a5e2bba38a ("net: pse-pd: Use power limit at driver side instead of current limit") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13rxrpc: Fix ipv6 path MTU discoveryDavid Howells
rxrpc path MTU discovery currently only makes use of ICMPv4, but not ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to check for ICMPv6 messages also. Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13KVM: arm64: Fix alignment of kvm_hyp_memcache allocationsQuentin Perret
When allocating guest stage-2 page-table pages at EL2, pKVM can consume pages from the host-provided kvm_hyp_memcache. As pgtable.c expects zeroed pages, guest_s2_zalloc_page() actively implements this zeroing with a PAGE_SIZE memset. Unfortunately, we don't check the page alignment of the host-provided address before doing so, which could lead to the memset overrunning the page if the host was malicious. Fix this by simply force-aligning all kvm_hyp_memcache allocations to page boundaries. Fixes: 60dfe093ec13 ("KVM: arm64: Instantiate guest stage-2 page-tables at EL2") Reported-by: Ben Simner <ben.simner@cl.cam.ac.uk> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20250213153615.3642515-1-qperret@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Convert timer offset VA when accessed in HYP codeMarc Zyngier
Now that EL2 has gained some early timer emulation, it accesses the offsets pointed to by the timer structure, both of which live in the KVM structure. Of course, these are *kernel* pointers, so the dereferencing of these pointers in non-kernel code must be itself be offset. Given switch.h its own version of timer_get_offset() and use that instead. Fixes: b86fc215dc26d ("KVM: arm64: Handle counter access early in non-HYP context") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Tested-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20250212173454.2864462-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()Mark Rutland
At the end of kvm_arch_vcpu_load_fp() we check that no bits are set in SVCR. We only check this for protected mode despite this mattering equally for non-protected mode, and the comment above this is confusing. Remove the comment and simplify the check, moving from WARN_ON() to WARN_ON_ONCE() to avoid spamming the log. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Eagerly switch ZCR_EL{1,2}Mark Rutland
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the CPU, the host's active SVE VL may differ from the guest's maximum SVE VL: * For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained by the guest hypervisor, which may be less than or equal to that guest's maximum VL. Note: in this case the value of ZCR_EL1 is immaterial due to E2H. * For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest, which may be less than or greater than the guest's maximum VL. Note: in this case hyp code traps host SVE usage and lazily restores ZCR_EL2 to the host's maximum VL, which may be greater than the guest's maximum VL. This can be the case between exiting a guest and kvm_arch_vcpu_put_fp(). If a softirq is taken during this period and the softirq handler tries to use kernel-mode NEON, then the kernel will fail to save the guest's FPSIMD/SVE state, and will pend a SIGKILL for the current thread. This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live FPSIMD/SVE state with the guest's maximum SVE VL, and fpsimd_save_user_state() verifies that the live SVE VL is as expected before attempting to save the register state: | if (WARN_ON(sve_get_vl() != vl)) { | force_signal_inject(SIGKILL, SI_KERNEL, 0, 0); | return; | } Fix this and make this a bit easier to reason about by always eagerly switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this happening, there's no need to trap host SVE usage, and the nVHE/nVHE __deactivate_cptr_traps() logic can be simplified to enable host access to all present FPSIMD/SVE/SME features. In protected nVHE/hVHE modes, the host's state is always saved/restored by hyp, and the guest's state is saved prior to exit to the host, so from the host's PoV the guest never has live FPSIMD/SVE/SME state, and the host's ZCR_EL1 is never clobbered by hyp. Fixes: 8c8010d69c132273 ("KVM: arm64: Save/restore SVE state for nVHE") Fixes: 2e3cf82063a00ea0 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Will Deacon <will@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Mark some header functions as inlineMark Rutland
The shared hyp switch header has a number of static functions which might not be used by all files that include the header, and when unused they will provoke compiler warnings, e.g. | In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8: | ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function] | 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function] | 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function] | 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function] | 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function] | 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code) | | ^~~~~~~~~~~~~~~~~~~ Mark these functions as 'inline' to suppress this warning. This shouldn't result in any functional change. At the same time, avoid the use of __alias() in the header and alias kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also marked as 'inline'. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Refactor exit handlersMark Rutland
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE, with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code in the header depends on function definitions provided by arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c when they include the header. This is an unusual header dependency, and prevents the use of arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would result in compiler warnings regarding missing definitions, e.g. | In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8: | ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined | 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu); | | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined | 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code); | | ^~~~~~~~~~~~~~~~~ Refactor the logic such that the header doesn't depend on anything from the C files. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Refactor CPTR trap deactivationMark Rutland
For historical reasons, the VHE and nVHE/hVHE implementations of __activate_cptr_traps() pair with a common implementation of __kvm_reset_cptr_el2(), which ideally would be named __deactivate_cptr_traps(). Rename __kvm_reset_cptr_el2() to __deactivate_cptr_traps(), and split it into separate VHE and nVHE/hVHE variants so that each can be paired with its corresponding implementation of __activate_cptr_traps(). At the same time, fold kvm_write_cptr_el2() into its callers. This makes it clear in-context whether a write is made to the CPACR_EL1 encoding or the CPTR_EL2 encoding, and removes the possibility of confusion as to whether kvm_write_cptr_el2() reformats the sysreg fields as cpacr_clear_set() does. In the nVHE/hVHE implementation of __activate_cptr_traps(), placing the sysreg writes within the if-else blocks requires that the call to __activate_traps_fpsimd32() is moved earlier, but as this was always called before writing to CPTR_EL2/CPACR_EL1, this should not result in a functional change. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-6-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove VHE host restore of CPACR_EL1.SMENMark Rutland
When KVM is in VHE mode, the host kernel tries to save and restore the configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1) across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the configuration may be clobbered by hyp when running a vCPU. This logic has historically been broken, and is currently redundant. This logic was originally introduced in commit: 861262ab86270206 ("KVM: arm64: Handle SME host state when running guests") At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when returning to the host, trapping host access to SME state. Unfortunately, this was unsafe as the host could take a softirq before calling kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode NEON the resulting attempt to save the live FPSIMD/SVE/SME state would result in a fatal trap. That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always saved/restored the host kernel's CPACR_EL1 value, and configured CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be trapped. The issue above was incidentally fixed by commit: 375110ab51dec5dc ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE") That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01 when returning to the host, permitting host kernel usage of SME, avoiding the issue described above. At the time, this was not identified as a fix for commit 861262ab86270206. Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME state, there's no need to save/restore the state of the EL0 SME trap. The kernel can safely save/restore state without trapping, as described above, and will restore userspace state (including trap controls) before returning to userspace. Remove the redundant logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove VHE host restore of CPACR_EL1.ZENMark Rutland
When KVM is in VHE mode, the host kernel tries to save and restore the configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1) across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the configuration may be clobbered by hyp when running a vCPU. This logic is currently redundant. The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when returning to the host, permitting host kernel usage of SVE. Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME state, there's no need to save/restore the state of the EL0 SVE trap. The kernel can safely save/restore state without trapping, as described above, and will restore userspace state (including trap controls) before returning to userspace. Remove the redundant logic. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Remove host FPSIMD saving for non-protected KVMMark Rutland
Now that the host eagerly saves its own FPSIMD/SVE/SME state, non-protected KVM never needs to save the host FPSIMD/SVE/SME state, and the code to do this is never used. Protected KVM still needs to save/restore the host FPSIMD/SVE state to avoid leaking guest state to the host (and to avoid revealing to the host whether the guest used FPSIMD/SVE/SME), and that code needs to be retained. Remove the unused code and data structures. To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the VHE hyp code, the nVHE/hVHE version is moved into the shared switch header, where it is only invoked when KVM is in protected mode. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME stateMark Rutland
There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees. Fixes: 93ae6b01bafee8fa ("KVM: arm64: Discard any SVE state when entering KVM guests") Fixes: 8c845e2731041f0f ("arm64/sve: Leave SVE enabled on syscall if we don't context switch") Fixes: ef3be86021c3bdf3 ("KVM: arm64: Add save/restore support for FPMR") Reported-by: Eric Auger <eauger@redhat.com> Reported-by: Wilco Dijkstra <wilco.dijkstra@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Eric Auger <eric.auger@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Fuad Tabba <tabba@google.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250210195226.1215254-2-mark.rutland@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-13gpiolib: Fix crash on error in gpiochip_get_ngpios()Andy Shevchenko
The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash. Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-13Merge tag 'for-net-2025-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btintel_pcie: Fix a potential race condition - L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd - L2CAP: Fix corrupted list in hci_chan_del * tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix corrupted list in hci_chan_del Bluetooth: btintel_pcie: Fix a potential race condition Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd ==================== Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Merge tag 'nf-25-02-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains one revert for: 1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to deal with DF flag unset scenarios. This is reverts a patch coming in the previous merge window (available in 6.14-rc releases). * tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: Revert "netfilter: flowtable: teardown flow if cached mtu is stale" ==================== Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13io_uring/uring_cmd: unconditionally copy SQEs at prep timeJens Axboe
This isn't generally necessary, but conditions have been observed where SQE data is accessed from the original SQE after prep has been done and outside of the initial issue. Opcode prep handlers must ensure that any SQE related data is stable beyond the prep phase, but uring_cmd is a bit special in how it handles the SQE which makes it susceptible to reading stale data. If the application has reused the SQE before the original completes, then that can lead to data corruption. Down the line we can relax this again once uring_cmd has been sanitized a bit, and avoid unnecessarily copying the SQE. Fixes: 5eff57fa9f3a ("io_uring/uring_cmd: defer SQE copying until it's needed") Reported-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-13sched_ext: Use SCX_CALL_OP_TASK in task_tick_scxChuyi Zhou
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of the current task, the following error will occur: scx_foo[3795244] triggered exit kind 1024: runtime error (called on a task not being operated on) The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK() when calling ops.tick(), which triggers the error during the subsequent scx_kf_allowed_on_arg_tasks() check. SCX_CALL_OP_TASK() was first introduced in commit 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation") to ensure task's rq lock is held when accessing task's sched_group. Since ops.tick() is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly, the same changes should be made for ops.disable() and ops.exit_task(), as they are also protected by task_rq_lock() and it's safe to access the task's task_group. Fixes: 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation") Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13Reapply "net: skb: introduce and use a single page frag cache"Jakub Kicinski
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76. Sabrina reports that the revert may trigger warnings due to intervening changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it and revisit once that part is also ironed out. Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.Chuyi Zhou
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_ push_{front,back}. This patch fix this issue. Without this patch, if we use bpf_list kfunc in scx, the BPF verifier would complain: libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or module BTFs libbpf: failed to load object 'scx_foo' libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL With this patch, the bpf list kfunc will work as expected. Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Fixes: 2a52ca7c98960 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers") Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13sched_ext: selftests: Fix grammar in tests descriptionDevaansh Kumar
Fixed grammar for a few tests of sched_ext. Signed-off-by: Devaansh Kumar <devaanshk840@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-02-13Merge tag 'loongarch-fixes-6.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus some trival cleanups" * tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Set host with kernel mode when switch to VM mode LoongArch: KVM: Remove duplicated cache attribute setting LoongArch: KVM: Fix typo issue about GCFG feature detection LoongArch: csum: Fix OoB access in IP checksum code for negative lengths LoongArch: Remove the deprecated notifier hook mechanism LoongArch: Use str_yes_no() helper function for /proc/cpuinfo LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE LoongArch: Fix idle VS timer enqueue
2025-02-13Merge tag 'platform-drivers-x86-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - thinkpad_acpi: - Fix registration of tpacpi platform driver - Support fan speed in ticks per revolution (Thinkpad X120e) - Support V9 DYTC profiles (new Thinkpad AMD platforms) - int3472: Handle GPIO "enable" vs "reset" variation (ov7251) * tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver platform/x86: int3472: Call "reset" GPIO "enable" for INT347E platform/x86: int3472: Use correct type for "polarity", call it gpio_flags platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
2025-02-13s390/qeth: move netif_napi_add_tx() and napi_enable() from under BHAlexandra Winter
Like other drivers qeth is calling local_bh_enable() after napi_schedule() to kick-start softirqs [0]. Since netif_napi_add_tx() and napi_enable() now take the netdev_lock() mutex [1], move them out from under the BH protection. Same solution as in commit a60558644e20 ("wifi: mt76: move napi_enable() from under BH") Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") Link: https://lore.kernel.org/netdev/20240612181900.4d9d18d0@kernel.org/ [0] Link: https://lore.kernel.org/netdev/20250115035319.559603-1-kuba@kernel.org/ [1] Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250212163659.2287292-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()Wentao Liang
Add a check for the return value of mlxsw_sp_port_get_stats_raw() in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw() returns an error, exit the function to prevent further processing with potentially invalid data. Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c") Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13ipv6: mcast: add RCU protection to mld_newpack()Eric Dumazet
mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13team: better TEAM_OPTION_TYPE_STRING validationEric Dumazet
syzbot reported following splat [1] Make sure user-provided data contains one nul byte. [1] BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline] BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714 string_nocheck lib/vsprintf.c:633 [inline] string+0x3ec/0x5f0 lib/vsprintf.c:714 vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843 __request_module+0x252/0x9f0 kernel/module/kmod.c:149 team_mode_get drivers/net/team/team_core.c:480 [inline] team_change_mode drivers/net/team/team_core.c:607 [inline] team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401 team_option_set drivers/net/team/team_core.c:375 [inline] team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:733 ____sys_sendmsg+0x877/0xb60 net/socket.c:2573 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627 __sys_sendmsg net/socket.c:2659 [inline] __do_sys_sendmsg net/socket.c:2664 [inline] __se_sys_sendmsg net/socket.c:2662 [inline] __x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662 x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Reported-by: syzbot+1fcd957a82e3a1baa94d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1fcd957a82e3a1baa94d Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250212134928.1541609-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-13Bluetooth: L2CAP: Fix corrupted list in hci_chan_delLuiz Augusto von Dentz
This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
2025-02-13Bluetooth: btintel_pcie: Fix a potential race conditionKiran K
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs to wait for this before sending other command. This patch fixes the potential miss of alive interrupt due to which HCI_OP_RESET can timeout. Expected flow: If tx command is HCI_OP_RESET, 1. set data->gp0_received = false 2. send HCI_OP_RESET 3. wait for alive interrupt Actual flow having potential race: If tx command is HCI_OP_RESET, 1. send HCI_OP_RESET 1a. Firmware raises alive interrupt here and in ISR data->gp0_received is set to true 2. set data->gp0_received = false 3. wait for alive interrupt Signed-off-by: Kiran K <kiran.k@intel.com> Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Reported-by: Bjorn Helgaas <helgaas@kernel.org> Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-13Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmdLuiz Augusto von Dentz
After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=31c2f641b850a348a734 Tested-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-13rust/kernel: Add faux device bindingsLyude Paul
This introduces a module for working with faux devices in rust, along with adding sample code to show how the API is used. Unlike other types of devices, we don't provide any hooks for device probe/removal - since these are optional for the faux API and are unnecessary in rust. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Maíra Canal <mairacanal@riseup.net> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-13driver core: add a faux bus for use when a simple device/bus is neededGreg Kroah-Hartman
Many drivers abuse the platform driver/bus system as it provides a simple way to create and bind a device to a driver-specific set of probe/release functions. Instead of doing that, and wasting all of the memory associated with a platform device, here is a "faux" bus that can be used instead. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-13MAINTAINERS: Use my kernel.org address for I2C ACPI workMika Westerberg
Switch to use my kernel.org address for I2C ACPI work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-13block: cleanup and fix batch completion adding conditionsJens Axboe
The conditions for whether or not a request is allowed adding to a completion batch are a bit hard to read, and they also have a few issues. One is that ioerror may indeed be a random value on passthrough, and it's being checked unconditionally of whether or not the given request is a passthrough request or not. Rewrite the conditions to be separate for easier reading, and only check ioerror for non-passthrough requests. This fixes an issue with bio unmapping on passthrough, where it fails getting added to a batch. This both leads to suboptimal performance, and may trigger a potential schedule-under-atomic condition for polled passthrough IO. Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()") Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-02-13Merge tag 'usb-serial-6.14-rc3' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.14-rc3 Here are some new modem device ids and a couple of related cleanups of the device id table. All have been in linux-next with no reported issues. * tag 'usb-serial-6.14-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828
2025-02-13PCI: Avoid FLR for Mediatek MT7922 WiFiBjorn Helgaas
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently does not work, and all subsequent config reads return ~0: pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint pciback 0000:01:00.0: not ready 65535ms after FLR; giving up After an FLR, pci_dev_wait() waits for the device to become ready. Prior to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"), it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR (~0). If it times out, pci_dev_wait() returns -ENOTTY and __pci_reset_function_locked() tries the next available reset method. Typically this is Secondary Bus Reset, which does work, so the MT7922 is eventually usable. After d591f6804e7e, if Configuration Request Retry Status Software Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it is something other than the special 0x0001 Vendor ID that indicates a completion with RRS status. When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001, i.e., the config read was completed with RRS, or a valid Vendor ID. On the MT7922, it seems that all config reads after FLR return ~0 indefinitely. When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's a valid Vendor ID and the device is now ready, so it returns with success. After pci_dev_wait() returns success, we restore config space and continue. Since the MT7922 is not actually ready after the FLR, the restore fails and the device is unusable. We considered changing pci_dev_wait() to continue polling if a PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did before d591f6804e7e, although we have to wait for the timeout and then fall back to SBR. But it doesn't work for SR-IOV VFs, which *always* return 0xffff as the Vendor ID. Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This will cause fallback to another reset method, such as SBR. Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS") Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149 Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Cc: stable@vger.kernel.org
2025-02-13genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGSAnup Patel
CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS is not used anymore, hence remove it. Fixes: f94a18249b7f ("genirq: Remove IRQ_MOVE_PCNTXT and related code") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250209041655.331470-7-apatel@ventanamicro.com
2025-02-13Xen/swiotlb: mark xen_swiotlb_fixup() __initJan Beulich
It's sole user (pci_xen_swiotlb_init()) is __init, too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13x86/xen: allow larger contiguous memory regions in PV guestsJuergen Gross
Today a PV guest (including dom0) can create 2MB contiguous memory regions for DMA buffers at max. This has led to problems at least with the megaraid_sas driver, which wants to allocate a 2.3MB DMA buffer. The limiting factor is the frame array used to do the hypercall for making the memory contiguous, which has 512 entries and is just a static array in mmu_pv.c. In order to not waste memory for non-PV guests, put the initial frame array into .init.data section and dynamically allocate an array from the .init_after_bootmem hook of PV guests. In case a contiguous memory area larger than the initially supported 2MB is requested, allocate a larger buffer for the frame list. Note that such an allocation is tried only after memory management has been initialized properly, which is tested via a flag being set in the .init_after_bootmem hook. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13xen/swiotlb: relax alignment requirementsJuergen Gross
When mapping a buffer for DMA via .map_page or .map_sg DMA operations, there is no need to check the machine frames to be aligned according to the mapped areas size. All what is needed in these cases is that the buffer is contiguous at machine level. So carve out the alignment check from range_straddles_page_boundary() and move it to a helper called by xen_swiotlb_alloc_coherent() and xen_swiotlb_free_coherent() directly. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-13arm64: rust: clean Rust 1.85.0 warning using softfloat targetMiguel Ojeda
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns [1] about disabling neon in the aarch64 hardfloat target: warning: target feature `neon` cannot be toggled with `-Ctarget-feature`: unsound on hard-float targets because it changes float ABI | = note: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release! = note: for more information, see issue #116344 <https://github.com/rust-lang/rust/issues/116344> Thus, instead, use the softfloat target instead. While trying it out, I found that the kernel sanitizers were not enabled for that built-in target [2]. Upstream Rust agreed to backport the enablement for the current beta so that it is ready for the 1.85.0 release [3] -- thanks! However, that still means that before Rust 1.85.0, we cannot switch since sanitizers could be in use. Thus conditionally do so. Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs). Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Matthew Maurer <mmaurer@google.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Ralf Jung <post@ralfj.de> Cc: Jubilee Young <workingjubilee@gmail.com> Link: https://github.com/rust-lang/rust/pull/133417 [1] Link: https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/arm64.20neon.20.60-Ctarget-feature.60.20warning/near/495358442 [2] Link: https://github.com/rust-lang/rust/pull/135905 [3] Link: https://github.com/rust-lang/rust/issues/116344 Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Ralf Jung <post@ralfj.de> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250210163732.281786-1-ojeda@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13MIPS: fix mips_get_syscall_arg() for o32Dmitry V. Levin
This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c53d4f9 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-02-13MIPS: Export syscall stack arguments properly for remote useMaciej W. Rozycki
We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2025-02-13arm64: Add missing registrations of hwcapsMark Brown
Commit 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") added definitions for HWCAP_FPRCVT, HWCAP_F8MM8 and HWCAP_F8MM4 but did not include the crucial registration in arm64_elf_hwcaps. Add it. Fixes: 819935464cb2 ("arm64/hwcap: Describe 2024 dpISA extensions to userspace") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20250212-arm64-fix-2024-dpisa-v2-1-67a1c11d6001@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13ACPI: GTDT: Relax sanity checking on Platform Timers array countOliver Upton
Perhaps unsurprisingly there are some platforms where the GTDT isn't quite right and the Platforms Timer array overflows the length of the overall table. While the recently-added sanity checking isn't wrong, it makes it impossible to boot the kernel on offending platforms. Try to hobble along and limit the Platform Timer count to the bounds of the table. Cc: Marc Zyngier <maz@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Zheng Zengkai <zhengzengkai@huawei.com> Cc: stable@vger.kernel.org Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev Signed-off-by: Will Deacon <will@kernel.org>
2025-02-13arm64: amu: Delay allocating cpumask for AMU FIE supportBeata Michalska
For the time being, the amu_fie_cpus cpumask is being exclusively used by the AMU-related internals of FIE support and is guaranteed to be valid on every access currently made. Still the mask is not being invalidated on one of the error handling code paths, which leaves a soft spot with theoretical risk of UAF for CPUMASK_OFFSTACK cases. To make things sound, delay allocating said cpumask (for CPUMASK_OFFSTACK) avoiding otherwise nasty sanitising case failing to register the cpufreq policy notifications. Signed-off-by: Beata Michalska <beata.michalska@arm.com> Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250131155842.3839098-1-beata.michalska@arm.com Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 05:08:58 +0000