| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.15, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
arm64: dts: st: add stm32mp215f-dk board support
dt-bindings: stm32: document stm32mp215f-dk board
arm64: dts: st: introduce stm32mp21 SoCs family
arm64: dts: st: add stm32mp235f-dk board support
dt-bindings: stm32: document stm32mp235f-dk board
arm64: dts: st: introduce stm32mp23 SoCs family
dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
arm64: dts: st: add stm32mp257f-dk board support
dt-bindings: stm32: document stm32mp257f-dk board
ARM: dts: stm32: Add Plymovent AQM devicetree
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
dt-bindings: arm: stm32: Add Plymovent AQM board
dt-bindings: sound: convert ICS-43432 binding to YAML
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
ARM: dts: stm32: add usr3 LED node to stm32f769-disco
ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
ARM: dts: stm32: add push button to stm32f746 Discovery board
ARM: dts: stm32: add led to stm32f746 Discovery board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.15
Generic Fixups/Cleanups:
SoC Specific features and Fixes:
AM62Ax:
Enable MCU domain pinctrl node
J784S4/J742S4:
GICD reg size fixes
Serdes lane ctrl reg mux mask fix
AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support
Board Specific:
J784S4:
EVM: Cleanup duplicate gpio-hogs
J722S:
TypeC port mux selection fix
AM62Ax
SK: boot-phase tag to support USB bootmode
RTC support
Aliases for wakeup and MCU serial UARTs
AM62P
SK: boot-phase tag to support USB bootmode
USB wakeup support
Aliases for wakeup and MCU serial UARTs
AM62:
verdin-dahila: microphone support
SK: Aliases for wakeup and MCU serial UARTs
BeaglePlay: reserved CMA region for Multimedia applications
J721e:
SK/EVM: boot-phase tags for Serdes for DFU boot
Phytech board updates:
Boot-phase tag updates for AM64/AM62/AM62A boards
DTS coding style cleanups
RTOS IPC reserved-memory additions
DT overlay for X27 Connectors on AM64 SOMs
J721S2 SOM:
Add flash partitions
* tag 'ti-k3-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (32 commits)
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style
arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style
arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
arm64: dts: ti: k3-j722s-evm: Add camera peripherals
arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
arm64: dts: ti: k3-j722s: fix pinctrl settings
arm64: dts: ti: k3-am62p: fix pinctrl settings
arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector
arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks
arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx
arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62p5-sk: Add serial alias
arm64: dts: ti: k3-am62a7-sk: Add serial alias
arm64: dts: ti: k3-am62x-sk-common: Add serial aliases
arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup
arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA
...
Link: https://lore.kernel.org/r/5d612c0e-4cd4-469a-9856-dd4552d74412@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.15:
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
* tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits)
arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block
arm64: dts: imx93: add ddr edac support
arm64: dts: imx95: add ref clock for pcie nodes
arm64: dts: mba8xx: Remove invalid property disable-gpio
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
arm64: dts: mba8mx: change sound card model name
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3
arm64: dts: imx95: Add imx95-15x15-evk support
arm64: dts: imx95: Add i3c1 and i3c2
arm64: dts: imx95: Add #io-channel-cells = <1> for adc node
arm64: dts: imx8mp-skov: support new 7" panel board
arm64: dts: imx8mp-skov: add revC BD500 board
arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers
arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI
arm64: dts: imx8mp-skov: add basic board as fallback
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
...
Link: https://lore.kernel.org/r/20250312074005.663165-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.15:
- Add compatibles for Skov i.MX8MP variants, VAR-SOM-MX6UL SoM and
Concerto, i.MX95 15x15 EVK, btt3 i.MX28
- Drop Toradex SOMs compatibles
* tag 'imx-bindings-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add VAR-SOM-MX6UL SoM and Concerto board
dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
dt-bindings: arm: fsl: add i.MX95 15x15 EVK board
dt-bindings: arm: fsl: add more compatibles for Skov i.MX8MP variants
dt-bindings: arm: Document the btt3 i.MX28 based board
Link: https://lore.kernel.org/r/20250312074005.663165-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.15
- Add Milk-V Jupiter board
- MAINTAINERS info
* tag 'spacemit-dt-for-6.15-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: Add Milk-V Jupiter board device tree
dt-bindings: riscv: spacemit: Add Milk-V Jupiter board compatible
MAINTAINERS: spacemit: update various info
Link: https://lore.kernel.org/r/20250312003023-GYA76989@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/dt
TI DaVinci updates for v6.15-rc1
- make GPIO hog names conform to bindings
* tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
ARM: dts: ti: davinci: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/20250311115720.40053-1-brgl@bgdev.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
Apple SoC DT updates for 6.15, final batch:
- Added touchbar screen nodes for M1/M2 platforms
- Added backlight nodes for iPhone, iPad and iPod touch
* tag 'asahi-soc-dt-6.15-v3' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8015: Add backlight nodes
arm64: dts: apple: t8010: Add backlight nodes
arm64: dts: apple: s800-0-3: Add backlight nodes
arm64: dts: apple: t7000: Add backlight nodes
arm64: dts: apple: s5l8960x: Add backlight nodes
arm64: dts: apple: Add touchbar screen nodes
Link: https://lore.kernel.org/r/20250309113212.48137-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.15-rc1
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
* tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: p2180: Add TMP451 temperature sensor node
arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
arm64: tegra: Remove the Orin NX/Nano suspend key
Link: https://lore.kernel.org/r/20250307174938.3456275-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.15-rc1
This adds compatible strings for Tegra114 HDA and Tegra124 MIPI.
* tag 'tegra-for-6.15-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Document Tegra114 HDA support
dt-bindings: display: tegra: Document Tegra124 MIPI
Link: https://lore.kernel.org/r/20250307162332.3451523-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"spi-controller" is not a documented property nor used anywhere, so drop
it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-4-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use preferred node names for bus, mmc, and ethernet.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-3-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The fixed clocks are not part of "simple-bus", so move them out of the
bus to the top-level. In the process, use the preferred node names of
"clock-<freq>". There's also little reason to have multiple fixed
clocks at the same frequencies, so remove them keeping the labels
to minimize the change.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-2-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AMD Overdrive B1 version is just more peripherals enabled over B0
version. Rework the B1 .dts to use the B0 .dts.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250306-dt-amd-fixes-v1-1-011c423ba99a@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15 (take two)
- Add GPU support for the RZ/V2H(P) SoC and the RZ/V2H EVK board.
* tag 'renesas-dts-for-v6.15-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable Mali-G31
arm64: dts: renesas: r9a09g057: Add Mali-G31 GPU node
Link: https://lore.kernel.org/r/cover.1741362039.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add STM32MP215F Discovery Kit board support. It embeds a STM32MP235FAN SoC,
with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT
combo, LCD 18bit connector, CSI camera connector, ...
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-10-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp215-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-9-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32MP21 family is composed of 3 SoCs defined as following:
-STM32MP211: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP213: STM32MP211 + a second ETH, CAN-FD.
-STM32MP215: STM32MP213 + Display and CSI2.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP21xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-8-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add STM32MP235F Discovery Kit board support. It embeds a STM32MP235FAK
SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT
combo, DSI HDMI, LVDS connector ...
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-7-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp235-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-6-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32MP23 family is composed of 3 SoCs defined as following:
-STM32MP231: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP233: STM32MP231 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD.
-STM32MP235: STM32MP233 + GPU/AI and video encode/decode, DSI and LDVS
display.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP23xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-5-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the new syscon compatibles for STM32MP21 syscfg = "st,stm32mp21-syscfg"
and for STM32MP23 syscfg = "st,stm32mp23-syscfg".
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-4-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Expand config ARCH_STM32 with two new SoCs families:
- STM32MP21 SoCs family, which is composed of STM32MP211, STM32MP213 and
STM32MP215 SoCs;
- STM32MP23 SoCs family, which is composed of STM32MP231, STM32MP233 and
STM32MP235 SoCs.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-3-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add STM32MP257F Discovery board support. It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo,
DSI HDMI, LVDS connector ...
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-2-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp257f-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-1-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Introduce the devicetree for the Plymovent AQM board
(stm32mp151c-plyaqm), based on the STM32MP151 SoC.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinmux groups required for the Plymovent AQM board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-4-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add support for the Plymovent AQM board based on the ST STM32MP151 SoC
to the STM32 devicetree bindings.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305131425.1491769-3-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Convert the ICS-43432 MEMS microphone device tree binding from text format
to YAML.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305131425.1491769-2-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite i.MX6UL VAR-SOM-MX6UL and the Variscite
Concerto carrier board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Toradex SOMs cannot be used alone without a carrier board, so drop
the usage of its compatible alone.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
AUDIO_AXI_CLK_ROOT can't run at currently requested 600MHz w/ its parent
SYS_PLL1 configured at 800MHz. Configure it to run at 800MHz as some
applications running on the DSP expect the core to run at this frequency
anyways. This change also affects the AUDIOMIX NoC.
Fixes: b739681b3f8b ("arm64: dts: imx8mp: Fix SDMA2/3 clocks")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Needed because the DSP and OCRAM_A components from AUDIOMIX are clocked
by AUDIO_AXI_CLK_ROOT instead of AUDIO_AHB_CLK_ROOT.
Fixes: b86c3afabb4f ("arm64: dts: imx8mp: Add SAI, SDMA, AudioMIX")
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add ddr edac support for imx93.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add "ref" clock for i.MX95's pcie and fix below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: pcie@4c300000: clock-names: ['pcie', 'pcie_bus', 'pcie_phy', 'pcie_aux'] is too short
from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
disable-gpio is an (old) downstream kernel property, which slipped into
DT. Remove it.
Fixes: c01a26b8897a ("arm64: dts: mba8xx: Add PCIe support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
IRQ mapping is already present. Add the missing DMA interrupt. This is
similar to commit 9d9c56025e429 ("arm64: dts: imx8-ss-hsio: Wire up DMA
IRQ for PCIe")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Move port@0 and port@1 under ports to fix below DTB_CHECK warnings.
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: port@0:reg:0:0: 0 is less than the minimum of 1
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dr_mode', 'phy-names', 'phys', 'port@0', 'port@1', 'snps,parkmode-disable-ss-quirk' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same model name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same model name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
