Age | Commit message (Collapse) | Author |
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
into clk-next
* clk-socfpga:
clk: socfpga: stratix10: Optimize local variables
clk: socfpga: clk-pll: Optimize local variables
* clk-sophgo:
clk: sophgo: Add clock controller support for SG2044 SoC
clk: sophgo: Add PLL clock controller support for SG2044 SoC
dt-bindings: clock: sophgo: add clock controller for SG2044
dt-bindings: soc: sophgo: Add SG2044 top syscon device
clk: sophgo: Add support for newly added precise compatible
dt-bindings: clock: sophgo: Use precise compatible for CV1800 series SoC
* clk-thead:
clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC
dt-bindings: clock: thead: Add TH1520 VO clock controller
* clk-samsung:
clk: samsung: correct clock summary for hsi1 block
clk: samsung: exynosautov920: Fix incorrect CLKS_NR_CPUCL0 definition
clk: samsung: exynosautov920: add cpucl1/2 clock support
dt-bindings: clock: exynosautov920: add cpucl1/2 clock definitions
clk: samsung: exynosautov920: add cpucl0 clock support
dt-bindings: clock: exynosautov920: add cpucl0 clock definitions
clk: samsung: Use samsung CCF common function
|
|
'clk-cleanup' into clk-next
* clk-bindings:
dt-bindings: clock: Drop st,stm32h7-rcc.txt
dt-bindings: clock: convert bcm2835-aux-clock to yaml
dt-bindings: clock: Drop maxim,max77686.txt
dt-bindings: clock: convert vf610-clock.txt to yaml format
* clk-renesas: (26 commits)
clk: renesas: r9a09g047: Add XSPI clock/reset
clk: renesas: r9a09g047: Add support for xspi mux and divider
dt-bindings: clock: renesas,r9a09g047-cpg: Add XSPI and GBETH PTP core clocks
clk: renesas: Use str_on_off() helper
clk: renesas: r9a09g057: Add clock and reset entries for USB2
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core clocks
clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation
clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable()
clk: renesas: rzv2h: Support static dividers without RMW
clk: renesas: rzv2h: Add macro for defining static dividers
clk: renesas: rzv2h: Add support for static mux clocks
clk: renesas: r9a09g047: Add clock and reset entries for GE3D
clk: renesas: rzv2h: Fix a typo
clk: renesas: rzv2h: Add support for RZ/V2N SoC
clk: renesas: rzv2h: Sort compatible list based on SoC part number
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert()
...
* clk-spacemit:
clk: spacemit: k1: Add TWSI8 bus and function clocks
clk: spacemit: Add clock support for SpacemiT K1 SoC
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
* clk-cleanup:
clk: test: Forward-declare struct of_phandle_args in kunit/clk.h
clk: davinci: Use of_get_available_child_by_name()
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
clk: bcm: rpi: Drop module alias
clk: bcm: kona: Remove unused scaled_div_build
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.16
- Add clock driver, fix for pinctrl/uart
- Add gpio support, enable LED heartbeat
* tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: add gpio LED for system heartbeat
riscv: dts: spacemit: add gpio support for K1 SoC
riscv: dts: spacemit: Acquire clocks for UART
riscv: dts: spacemit: Acquire clocks for pinctrl
riscv: dts: spacemit: Add clock tree for SpacemiT K1
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
RISC-V SoC for v6.16
Sophgo:
Add support for SG2044 TOP syscon device. The SG2044 TOP
device provide PLL clock function in its area.
Add RTC support for CV1800 series SoC. The device
is called RTC, but contains control registers of other
HW blocks in its address space, most notably of
Power-on-Reset (PoR) module, DW8051 IP (MCU core),
accompanying SRAM, hence putting it in SoC subsystem.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux:
soc: sophgo: cv1800: rtcsys: New driver (handling RTC only)
dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series
soc: sophgo: sg2044: Add support for SG2044 TOP syscon device
Link: https://lore.kernel.org/r/MA0P287MB2262B041A26A0F5EAD1E296CFE91A@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic Driver for v6.16:
- Amlogic clk measure memory usage optimization
- Amlogic clk measure support for S4 & C3 Socs
- Amlogic A4/A5 reset controller bindings
* tag 'amlogic-driver-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: reset: Add compatible for Amlogic A4/A5 Reset Controller
soc: amlogic: clk-measure: Add support for S4
soc: amlogic: clk-measure: Add support for C3
dt-bindings: soc: amlogic: S4 supports clk-measure
dt-bindings: soc: amlogic: C3 supports clk-measure
soc: amlogic: clk-measure: Define MSR_CLK's register offset separately
soc: amlogic: clk-measure: Optimize the memory size of clk-measure
Link: https://lore.kernel.org/r/04908842-4c55-44a0-b74c-3aca82a1f204@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.16
Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
* tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits)
arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640
arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX
arm64: dts: ti: j722s-evm: Add DT nodes for power regulators
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps
arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
arm64: dts: ti: k3-j721s2: Add GPU node
arm64: dts: ti: k3-am62: New GPU binding details
arm64: dts: ti: k3-am62-main: Add PRUSS-M node
arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
...
Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The reserved-memory.yaml reference needs the full path. No warnings were
generated because the example has the wrong compatible string, so fix
that too.
Fixes: 304a90c4f75d ("dt-bindings: soc: fsl: Convert q(b)man-* to yaml format")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154231.1590634-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
gs101 requires access to the pmu interrupt generation register region
which is exposed as a syscon. Update the exynos-pmu bindings documentation
to reflect this.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-2-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add bindings documentation for the Power Management Unit (PMU) interrupt
generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-1-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add all syscon compatibles for rk3562.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250509102308.761424-3-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Qualcomm MSM8660 and IPQ0864 platforms use additional clock for the RPM
device. Document it in the schema.
Fixes: aa0c4b815045 ("mfd: devicetree: bindings: Add Qualcomm RPM DT binding")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-2-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On Qualcomm platforms in addition to regulators the RPM also provides
clocks via the child clock-controller node. Describe it properly in the
schema.
Fixes: 872f91b5ea72 ("clk: qcom: Add support for RPM Clocks")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-1-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.16
This brings some cleanups to the MediaTek DVFSRC driver, commonizing
the bandwidth constraints platform data, and also adds support for
the DVFSRC hardware found in the MediaTek Dimensity 1200 MT6893 SoC.
* tag 'mtk-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-dvfsrc: remove an unused variable
soc: mediatek: mtk-dvfsrc: Add support for Dimensity 1200 MT6893
soc: mediatek: mtk-dvfsrc: Rename and move bw constraints data
dt-bindings: soc: mediatek: dvfsrc: Add support for MT6893
Link: https://lore.kernel.org/r/20250506091736.125733-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.16
- Document support for the Renesas RZ/T2H (R9A09G077) SoC and the
RZT2H-EVK evaluation board,
- Document support for the Retronix Sparrow Hawk board, which is based
on R-Car V4H ES3.0.
* tag 'renesas-dt-bindings-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document Retronix R-Car V4H Sparrow Hawk board support
dt-bindings: vendor-prefixes: Add Retronix Technology Inc.
dt-bindings: soc: renesas: Add Renesas RZ/T2H (R9A09G077) SoC
Link: https://lore.kernel.org/r/cover.1745582594.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add RTC devicetree binding for Sophgo CV1800 series SoC. The device is
called RTC, but contains control registers of other HW blocks in its
address space, most notably of Power-on-Reset (PoR) module, DW8051 IP
(MCU core), accompanying SRAM, hence putting it in SoC subsystem.
Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250315224921.3627852-2-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The SG2044 top syscon device provide PLL clock control and some other
misc feature of the SoC.
Add the compatible string for SG2044 top syscon device.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250418020325.421257-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add the child nodes that can be found under this node. Then as done
for other similar devices (J7200 and J721s2) add support for the AM654
system controller to this binding.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
support
Document Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250420173829.200553-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Reference wireless-controller.yaml schema, so we can use properties
as local-mac-address or mac-address.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20250324-dt-bindings-network-class-v5-5-f5c3fe00e8f0@ixit.cz
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Certain platforms (such as Chrome SDM845 and SC7180 with a TF-A running
as secure firmware) do not have a OSI-mode capable PSCI implementation.
That in turn means the PSCI-associated power domain which represents the
system's power state can't provide enough feedback to the RSC device.
Don't require power-domains on platforms where this may be the case.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250327-topic-more_dt_bindings_fixes-v2-1-b763d958545f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Replace the prose for properties dependent on specific "enable-method"
values with schemas defining the same requirements.
Both "qcom,acc" and "qcom,saw" properties appear to be required for any
of the Qualcomm enable-method values, so the schema is a bit simpler
than what the text said. The properties are also needed on some Qualcomm
platforms with other enable-method values. It's limited to Cortex A53
based platforms so use that to disable the properties. The references
to arm/msm/qcom,saw2.txt and arm/msm/qcom,kpss-acc.txt are out of date,
so just drop them.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-12-63d7dc9ddd0a@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
S4 adds support for clk-measure.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-3-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
C3 adds support for clk-measure.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-2-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add RZ/T2H (R9A09G077), its variants, and the RZT2H-EVK evaluation board
in documentation.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250403212919.1137670-2-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a pattern property for pcie-ctrl which can be part of this controller.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Change description and add example]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250402113201.151195-2-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Document APMU, MPMU and APBC syscons found on SpacemiT K1 SoC, which are
capable of generating clock and reset signals. Additionally, APMU and MPMU
manage power domains.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-2-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add a compatible for the MediaTek Dimensity 1200 (MT6893) SoC's
DVFSRC hardware, introducing capability to communicate with it.
Even though this SoC uses the same basic version of the DVFSRC
IP as MT8195, the vcore-vdram parameters are different, hence
no fallback compatibility is possible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250410144019.475930-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System
Controller (SYS) binding, as both IPs are very similar.
However, they have different SoC IDs, and the RZ/V2N does not have
PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle
these differences, introduce a new compatible string
`renesas,r9a09g056-sys`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing
between configurations with and without specific hardware features such
as GPU, ISP, and cryptographic extensions. Also, document the
"renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
make dt_binding_check:
Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml: maintainers:0: 'Frank Li' does not match '@'
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Fix this by adding Frank's email address.
Fixes: 9ca5a7d9d2e05de6 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/185e1e06692dc5b08abcde2d3dd137c78e979d08.1744301283.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.15
- Align clock nodes with DT binding
- Add the first VN-X Versal NET board
- Move constants out of DT bindings
* tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: xilinx: Deprecate header with firmware constants
arm64: zynqmp: Use DT header for firmware constants
arm64: versal-net: Add description for b2197-00 revA board
dt-bindings: soc: Add new VN-X board description based on Versal NET
arm64: zynqmp: add clock-output-names property in clock nodes
Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Device nodes in the examples are supposed to be enabled, so the schema
will be validated against them. Keeping them disabled hides potential
errors. Only one child of Samsung Exynos USI device node should be
enabled. The node in the example already selected 'USI_MODE_UART', so
enable the serial node while keeping second - I2C - disabled.
Link: https://lore.kernel.org/r/20250307081341.35197-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add compatible string for VPU GRF found on RK3528 SoC.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305194217.47052-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add compatible string for VO GRF found on RK3528 SoC.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250305194217.47052-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document the 'firmware-name' property in the device tree bindings to
support loading SE (Serial Engine) firmware from the protocol driver,
allowing for more flexible firmware management.
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250303124349.3474185-2-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the compatible string for the Exynos7870 PMU. It's compatible
with the Exynos7 PMU design. It handles syscon reboot, syscon reboot mode,
as well as other system control registers (i.e registers for the USB PHY).
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-v4-1-2925537f9b2a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|