| Age | Commit message (Collapse) | Author |
|---|
|
Both Intel and AMD CPUs support 5-level paging, which is expected to
become more widely adopted in the future. All major x86 Linux
distributions have the feature enabled.
Remove CONFIG_X86_5LEVEL and related #ifdeffery for it to make it more readable.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250516123306.3812286-4-kirill.shutemov@linux.intel.com
|
|
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
|
|
The global pseudo-constants 'page_offset_base', 'vmalloc_base' and
'vmemmap_base' are not used extremely early during the boot, and cannot be
used safely until after the KASLR memory randomization code in
kernel_randomize_memory() executes, which may update their values.
So there is no point in setting these variables extremely early, and it
can wait until after the kernel itself is mapped and running from its
permanent virtual mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250513111157.717727-9-ardb+git@google.com
|
|
Conflicts:
arch/x86/boot/startup/sme.c
arch/x86/coco/sev/core.c
arch/x86/kernel/fpu/core.c
arch/x86/kernel/fpu/xstate.c
Semantic conflict:
arch/x86/include/asm/sev-internal.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Most of the SEV support code used to reside in a single C source file
that was included in two places: the core kernel, and the decompressor.
The code that is actually shared with the decompressor was moved into a
separate, shared source file under startup/, on the basis that the
decompressor also executes from the early 1:1 mapping of memory.
However, while the elaborate #VC handling and instruction decoding that
it involves is also performed by the decompressor, it does not actually
occur in the core kernel at early boot, and therefore, does not need to
be part of the confined early startup code.
So split off the #VC handling code and move it back into arch/x86/coco
where it came from, into another C source file that is included from
both the decompressor and the core kernel.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-31-ardb+git@google.com
|
|
The SME encryption startup code populates page tables using the ordinary
set_pXX() helpers, and in a PTI build, these will call out to
__pti_set_user_pgtbl() to manipulate the shadow copy of the page tables
for user space.
This is unneeded for the startup code, which only manipulates the
swapper page tables, and so this call could be avoided in this
particular case. So instead of exposing the ordinary
__pti_set_user_pgtblt() to the startup code after its gets confined into
its own symbol space, provide an alternative which just returns pgd,
which is always correct in the startup context.
Annotate it as __weak for now, this will be dropped in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-40-ardb+git@google.com
|
|
As a first step towards disentangling the SEV #VC handling code -which
is shared between the decompressor and the core kernel- from the SEV
startup code, move the decompressor's copy of the instruction decoder
into a separate source file.
Code movement only - no functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-30-ardb+git@google.com
|
|
sev_snp_enabled() is no longer used outside of the source file that
defines it, so make it static and drop the extern declarations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-29-ardb+git@google.com
|
|
__supported_pte_mask is statically initialized to U64_MAX and never
assigned until long after the startup code executes that creates the
initial page tables. So applying the mask is unnecessary, and can be
avoided.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-27-ardb+git@google.com
|
|
Move early_setup_gdt() out of the startup code that is callable from the
1:1 mapping - this is not needed, and instead, it is better to expose
the helper that does reside in __head directly.
This reduces the amount of code that needs special checks for 1:1
execution suitability. In particular, it avoids dealing with the GHCB
page (and its physical address) in startup code, which runs from the
1:1 mapping, making physical to virtual translations ambiguous.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-26-ardb+git@google.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
|
|
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
|
|
This commits breaks SNP guests:
234cf67fc3bd ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
|
|
objtool already struggles to identify jump tables correctly in non-PIC
code, where the idiom is something like
jmpq *table(,%idx,8)
and the table is a list of absolute addresses of jump targets.
When using -fPIC, both the table reference as well as the jump targets
are emitted in a RIP-relative manner, resulting in something like
leaq table(%rip), %tbl
movslq (%tbl,%idx,4), %offset
addq %offset, %tbl
jmpq *%tbl
and the table is a list of offsets of the jump targets relative to the
start of the entire table.
Considering that this sequence of instructions can be interleaved with
other instructions that have nothing to do with the jump table in
question, it is extremely difficult to infer the control flow by
deriving the jump targets from the indirect jump, the location of the
table and the relative offsets it contains.
So let's not bother and disable jump tables for code built with -fPIC
under arch/x86/boot/startup.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250422210510.600354-2-ardb+git@google.com
|
|
Now that the early SEV code is built with -fPIC, RIP_REL_REF() has no
effect and can be dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-13-ardb+git@google.com
|
|
Move the SEV startup code into arch/x86/boot/startup/, where it will
reside along with other code that executes extremely early, and
therefore needs to be built in a special manner.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-12-ardb+git@google.com
|
|
Disentangle the SEV core code and the SEV code that is called during
early boot. The latter piece will be moved into startup/ in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250418141253.2601348-11-ardb+git@google.com
|
|
upstream fixes
In particular we need this fix before applying subsequent changes:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
|
|
Current minimum required version of binutils is 2.25,
which supports PAUSE instruction mnemonic.
Replace "REP; NOP" with this proper mnemonic.
No functional change intended.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250418080805.83679-2-ubizjak@gmail.com
|
|
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "rep" prefixes, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "rep; insn" (or its
alternate "rep\n\tinsn" form) as two separate instructions. Removing
the semicolon makes asm length calculations more accurate, consequently
making scheduling and inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving "rep"
prefixes. Trying to assemble e.g. "rep addl %eax, %ebx" results in:
Error: invalid instruction `add' after `rep'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Mares <mj@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250418071437.4144391-1-ubizjak@gmail.com
|
|
When building with CONFIG_LTO_CLANG, there is an error in the x86 boot
startup code because it builds with a different code model than the rest
of the kernel:
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(head64.o at 1302448), and 'i32 1' from vmlinux.a(map_kernel.o at 1314208)
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(common.o at 1306108), and 'i32 1' from vmlinux.a(gdt_idt.o at 1314148)
As this directory is for code that only runs during early system
initialization, LTO is not very important, so filter out the LTO flags
from KBUILD_CFLAGS for arch/x86/boot/startup to resolve the build error.
Fixes: 4cecebf200ef ("x86/boot: Move the early GDT/IDT setup code into startup/")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250414-x86-boot-startup-lto-error-v1-1-7c8bed7c131c@kernel.org
Closes: https://lore.kernel.org/CA+G9fYvnun+bhYgtt425LWxzOmj+8Jf3ruKeYxQSx-F6U7aisg@mail.gmail.com/
|
|
Prepare for splitting off parts of the SEV core.c source file into a
file that carries code that must tolerate being called from the early
1:1 mapping. This will allow special build-time handling of thise code,
to ensure that it gets generated in a way that is compatible with the
early execution context.
So create a de-facto internal SEV API and put the definitions into
sev-internal.h. No attempt is made to allow this header file to be
included in arbitrary other sources - this is explicitly not the intent.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-20-ardb+git@google.com
|
|
RIP_REL_REF() has no effect on code residing in arch/x86/boot/startup,
as it is built with -fPIC. So remove any occurrences from the SME
startup code.
Note the SME is the only caller of cc_set_mask() that requires this, so
drop it from there as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-19-ardb+git@google.com
|
|
Move the SME initialization code, which runs from the 1:1 mapping of
memory as it operates on the kernel virtual mapping, into the new
sub-directory arch/x86/boot/startup/ where all startup code will reside
that needs to tolerate executing from the 1:1 mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-18-ardb+git@google.com
|
|
Now that __startup_64() is built using -fPIC, RIP_REL_REF() has become a
NOP and can be removed. Only some occurrences of rip_rel_ptr() will
remain, to explicitly take the address of certain global structures in
the 1:1 mapping of memory.
While at it, update the code comment to describe why this is needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-17-ardb+git@google.com
|
|
The startup code that constructs the kernel virtual mapping runs from
the 1:1 mapping of memory itself, and therefore, cannot use absolute
symbol references. Before making changes in subsequent patches, move
this code into a separate source file under arch/x86/boot/startup/ where
all such code will be kept from now on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-16-ardb+git@google.com
|
|
Move the early GDT/IDT setup code that runs long before the kernel
virtual mapping is up into arch/x86/boot/startup/, and build it in a way
that ensures that the code tolerates being called from the 1:1 mapping
of memory. The code itself is left unchanged by this patch.
Also tweak the sed symbol matching pattern in the decompressor to match
on lower case 't' or 'b', as these will be emitted by Clang for symbols
with hidden linkage.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250410134117.3713574-15-ardb+git@google.com
|
|
The library code built under arch/x86/boot/startup is not intended to be
linked into vmlinux but only into the decompressor and/or the EFI stub.
This means objtool validation is not needed here, and may result in
false positive errors for things like missing retpolines.
So disable it for all objects added to lib-y
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250408085254.836788-10-ardb+git@google.com
|
|
startup/
Linus expressed a strong preference for arch-specific asm code (i.e.,
virtually all of it) to reside under arch/ rather than anywhere else.
So move the EFI mixed mode startup code back, and put it under
arch/x86/boot/startup/ where all shared x86 startup code is going to
live.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-11-ardb+git@google.com
|
|
The 5-level paging trampoline is used by both the EFI stub and the
traditional decompressor. Move it out of the decompressor sources into
the newly minted arch/x86/boot/startup/ sub-directory which will hold
startup code that may be shared between the decompressor, the EFI stub
and the kernel proper, and needs to tolerate being called during early
boot, before the kernel virtual mapping has been created.
This will allow the 5-level paging trampoline to be used by EFI boot
images such as zboot that omit the traditional decompressor entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-10-ardb+git@google.com
|
|
Merge the local include "pgtable.h" -which declares the API of the
5-level paging trampoline- into <asm/boot.h> so that its implementation
in la57toggle.S as well as the calling code can be decoupled from the
traditional decompressor.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-9-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
|
|
We've had this before: when we remove infrastructure to generate files,
the old stale build artifacts still remain in-tree. And when the
infrastructure to generate them is gone, so is the gitignore file for
those build artifacts.
End result: git will see the old generated files, and people will
mistakenly commit them. That's what happened with the 'genheaders' file
not that long ago (see commit 04a3389b3535 "Remove stale generated
'genheaders' file").
This time it's commit 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and
the build tool that generates it") that removed the 'build' file from
the arch/x86/boot/tools/ subdirectory, and removed the .gitignore file
too (because the whole subdirectory is gone).
And as a result, if you don't do a 'git clean -dqfx' or similar to clean
up your tree, 'git status' will say
Untracked files:
(use "git add <file>..." to include in what will be committed)
arch/x86/boot/tools/
and some hapless sleep-deprived developer will inevitably decide that
that means that they need to 'git add' that directory. Which would
bring back some stale generated file that we most definitely do not want
in the tree.
So when removing directories that had special .gitignore patterns, make
sure to add a new gitignore entry in the parent directory for the no
longer existing subdirectory.
It will avoid mistakes.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot code updates from Ingo Molnar:
- Memblock setup and other early boot code cleanups (Mike Rapoport)
- Export e820_table_kexec[] to sysfs (Dave Young)
- Baby steps of adding relocate_kernel() debugging support (David
Woodhouse)
- Replace open-coded parity calculation with parity8() (Kuan-Wei Chiu)
- Move the LA57 trampoline to separate source file (Ard Biesheuvel)
- Misc micro-optimizations (Uros Bizjak)
- Drop obsolete E820_TYPE_RESERVED_KERN and related code (Mike
Rapoport)
* tag 'x86-boot-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Add relocate_kernel() debugging support: Load a GDT
x86/boot: Move the LA57 trampoline to separate source file
x86/boot: Do not test if AC and ID eflags are changeable on x86_64
x86/bootflag: Replace open-coded parity calculation with parity8()
x86/bootflag: Micro-optimize sbf_write()
x86/boot: Add missing has_cpuflag() prototype
x86/kexec: Export e820_table_kexec[] to sysfs
x86/boot: Change some static bootflag functions to bool
x86/e820: Drop obsolete E820_TYPE_RESERVED_KERN and related code
x86/boot: Split parsing of boot_params into the parse_boot_params() helper function
x86/boot: Split kernel resources setup into the setup_kernel_resources() helper function
x86/boot: Move setting of memblock parameters to e820__memblock_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
- Drop CRC-32 checksum and the build tool that generates it (Ard
Biesheuvel)
- Fix broken copy command in genimage.sh when making isoimage (Nir
Lichtman)
* tag 'x86-build-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Add back some padding for the CRC-32 checksum
x86/boot: Drop CRC-32 checksum and the build tool that generates it
x86/build: Fix broken copy command in genimage.sh when making isoimage
|
|
The toplevel Makefile already provides -fmacro-prefix-map as part of
KBUILD_CPPFLAGS. In contrast to the KBUILD_CFLAGS and KBUILD_AFLAGS
variables, KBUILD_CPPFLAGS is not redefined in the architecture specific
Makefiles. Therefore the toplevel KBUILD_CPPFLAGS do apply just fine, to
both C and ASM sources.
The custom configuration was necessary when it was added in
commit 9e2276fa6eb3 ("arch/x86/boot: Use prefix map to avoid embedded
paths") but has since become unnecessary in commit a716bd743210
("kbuild: use -fmacro-prefix-map for .S sources").
Drop the now unnecessary custom prefix map configuration.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with UAPI headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is mostly a mechanical patch (done with a simple "sed -i"
statement), with some manual tweaks in <asm/frame.h>, <asm/hw_irq.h>
and <asm/setup.h> that mentioned this macro in comments with some
missing underscores.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314071013.1575167-38-thuth@redhat.com
|
|
config
Introduce an AWK script to auto-generate the <asm/cpufeaturemasks.h> header
with required and disabled feature masks based on <asm/cpufeatures.h>
and the current build config.
Thus for any CPU feature with a build config, e.g., X86_FRED, simply add:
config X86_DISABLED_FEATURE_FRED
def_bool y
depends on !X86_FRED
to arch/x86/Kconfig.cpufeatures, instead of adding a conditional CPU
feature disable flag, e.g., DISABLE_FRED.
Lastly, the generated required and disabled feature masks will be added to
their corresponding feature masks for this particular compile-time
configuration.
[ Xin: build integration improvements ]
[ mingo: Improved changelog and comments ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250305184725.3341760-3-xin@zytor.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Instead of generating the vmlinux.relocs file (needed by the
decompressor build to construct the KASLR relocation tables) as a
vmlinux postlink step, which is dubious because it depends on data that
is stripped from vmlinux before the build completes, generate it from
vmlinux.unstripped, which has been introduced specifically for this
purpose.
This ensures that each artifact is rebuilt as needed, rather than as a
side effect of another build rule.
This effectively reverts commit
9d9173e9ceb6 ("x86/build: Avoid relocation information in final vmlinux")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
To permit the EFI stub to call this code even when building the kernel
without the legacy decompressor, move the trampoline out of the latter's
startup code.
This is part of an ongoing WIP effort on my part to make the existing,
generic EFI zboot format work on x86 as well.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250313120324.1095968-2-ardb+git@google.com
|
|
Even though no uses of the bzImage CRC-32 checksum are known, ensure
that the last 4 bytes of the image are unused zero bytes, so that the
checksum can be generated post-build if needed.
[ mingo: Added the 'obsolete' qualifier to the comment. ]
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250312081204.521411-2-ardb+git@google.com
|
|
The test for the changeabitily of AC and ID EFLAGS is used to
distinguish between i386 and i486 processors (AC) and to test
for CPUID instruction support (ID).
Skip these tests on x86_64 processors as they always supports CPUID.
Also change the return type of has_eflag() to bool.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20250307091022.181136-1-ubizjak@gmail.com
|
|
Apart from some sanity checks on the size of setup.bin, the only
remaining task carried out by the arch/x86/boot/tools/build.c build tool
is generating the CRC-32 checksum of the bzImage. This feature was added
in commit
7d6e737c8d2698b6 ("x86: add a crc32 checksum to the kernel image.")
without any motivation (or any commit log text, for that matter). This
checksum is not verified by any known bootloader, and given that
a) the checksum of the entire bzImage is reported by most tools (zlib,
rhash) as 0xffffffff and not 0x0 as documented,
b) the checksum is corrupted when the image is signed for secure boot,
which means that no distro ships x86 images with valid CRCs,
it seems quite unlikely that this checksum is being used, so let's just
drop it, along with the tool that generates it.
Instead, use simple file concatenation and truncation to combine the two
pieces into bzImage, and replace the checks on the size of the setup
block with a couple of ASSERT()s in the linker script.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307164801.885261-2-ardb+git@google.com
|
