| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes that have been gathered since
the previous pull:
- A few more HD-audio quirks and fixups
- A series of Qualcomm AudioReach fixes
- Various small fixes for ASoC rt5665, WSA, SOF and Cirrus"
* tag 'sound-fix-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix built-in mic on another ASUS VivoBook model
ALSA: hda/realtek - Support mute led function for HP platform
ASoC: imx-card: Add NULL check in imx_card_probe()
ASoC: codecs: rt5665: Fix some error handling paths in rt5665_probe()
ASoC: q6apm-dai: make use of q6apm_get_hw_pointer
ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns.
ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment.
ASoC: q6apm: add q6apm_get_hw_pointer helper
ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs
ASoC: SOF: hda/ptl: Move mic privacy change notification sending to a work
ALSA/hda: intel-sdw-acpi: Remove (explicitly) unused header
ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx
ALSA: hda/tas2781: Upgrade calibratd-data writing code to support Alpha and Beta dsp firmware
ASoC: qdsp6: q6asm-dai: fix q6asm_dai_compr_set_params error path
ALSA: hda/realtek: Fix built-in mic breakage on ASUS VivoBook X515JA
ASoC: sma1307: Fix error handling in sma1307_setting_loaded()
ASoC: codecs: wsa884x: Correct VI sense channel mask
ASoC: codecs: wsa883x: Correct VI sense channel mask
firmware: cs_dsp: Ensure cs_dsp_load[_coeff]() returns 0 on success
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250326040659.1190696-1-nichen@iscas.ac.cn
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
The ABI of the hypercall requires that R2 and R3 are 0. Explicitly pass
0 for these parameters.
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Fixes: 86edf6bdcf05 ("smccc/kvm_guest: Enable errata based on implementation CPUs")
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250327163613.2516073-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d5085a ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d5085a ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc/drivers
arm64: ZynqMP SoC changes for 6.15
- Align fpga config status with firmware
* tag 'zynqmp-soc-for-6.15' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Dont send linux address to get fpga config get status
Link: https://lore.kernel.org/r/CAHTX3d+T+_zvwAVqGO+J_+Yia+wXAGsaEbPi1ye1AUYXoq6dmw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Here's a final batch of EFI fixes for v6.14.
The efivarfs ones are fixes for changes that were made this cycle.
James's fix is somewhat of a band-aid, but it was blessed by the VFS
folks, who are working with James to come up with something better for
the next cycle.
- Avoid physical address 0x0 for random page allocations
- Add correct lockdep annotation when traversing efivarfs on resume
- Avoid NULL mount in kernel_file_open() when traversing efivarfs on
resume"
* tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: fix NULL dereference on resume
efivarfs: use I_MUTEX_CHILD nested lock to traverse variables on resume
efi/libstub: Avoid physical address 0x0 when doing random allocation
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.15
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
* tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: config: ti-sci: Default set to ARCH_K3 for the ti sci driver
soc: ti: k3-socinfo: Do not use syscon helper to build regmap
Link: https://lore.kernel.org/r/20250312113826.ka63nijuftgs6h52@mocker
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Without this, the driver fails to build:
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_call_rpc':
thead,th1520-aon.c:(.text+0x28): undefined reference to `mbox_send_message'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_deinit':
thead,th1520-aon.c:(.text+0x17e): undefined reference to `mbox_free_channel'
ld: drivers/firmware/thead,th1520-aon.o: in function `th1520_aon_init':
thead,th1520-aon.c:(.text+0x1d9): undefined reference to `mbox_request_channel_byname'
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250314154816.4045334-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Record the error code before freeing "aon_chan" to avoid a
use after free.
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/f19be994-d355-48a6-ab45-d0f7e5955daf@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove EFI zboot's dependency on the decompression wrappers used by the
legacy decompressor boot code, which can only process the input in one
go, and this will not work for upcoming support for embedded ELF images.
They also do some odd things like providing a barebones malloc()
implementation, which is not needed in a hosted environment such as the
EFI boot services.
So instead, implement GZIP deflate and ZSTD decompression in terms of
the underlying libraries. Support for other compression algoritms has
already been dropped.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Ben reports spurious EFI zboot failures on a system where physical RAM
starts at 0x0. When doing random memory allocation from the EFI stub on
such a platform, a random seed of 0x0 (which means no entropy source is
available) will result in the allocation to be placed at address 0x0 if
sufficient space is available.
When this allocation is subsequently passed on to the decompression
code, the 0x0 address is mistaken for NULL and the code complains and
gives up.
So avoid address 0x0 when doing random allocation, and set the minimum
address to the minimum alignment.
Cc: <stable@vger.kernel.org>
Reported-by: Ben Schneider <ben@bens.haus>
Tested-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The T-Head TH1520 SoC uses an E902 co-processor running Always-On (AON)
firmware to manage power, clock, and other system resources [1]. This
patch introduces a driver implementing the AON firmware protocol,
allowing the Linux kernel to communicate with the firmware via mailbox
channels. Through an RPC-based interface, the kernel can initiate power
state transitions, update resource configurations, and perform other
AON-related tasks.
[1]
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-3-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Given that memset/memcpy are intrinsics, the compiler might insert calls
to these routines unexpectedly, including in code that executes after
ExitBootServices(). In this case, the respective boot services are no
longer accessible, and calling them will cause a crash.
So fall back to a bytewise copy/store if this happens to occur, even
though no such occurrences are known to exist in the kernel currently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Open coded arithmetic in allocator arguments is discouraged. Helper
functions like kcalloc or, in this case, kmalloc_array are preferred.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
The paravirtual implementation ID stuffs is 64-bit only and broke 32bit
arm builds. Slap an ifdef bandaid on the situation to get things rolling
again.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The scmi_common_fastchannel_db_ring() function calls either ioread64()
or ioread64_hi_lo() depending on whether it is compiler for 32-bit
or 64-bit architectures.
The same logic is used to define ioread64() itself in the
linux/io-64-nonatomic-hi-lo.h header file, so the special case
is not really needed.
The behavior here should not change at all.
Fixes: 6f9ea4dabd2d ("firmware: arm_scmi: Generalize the fast channel support")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250304144346.1025658-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.15
This update primarily focuses on FF-A framework notification support
along with other improvements, including UUID handling enhancements
and various fixes.
1. FF-A framework notification upport
- Adds support for multiple UUIDs per partition to register individual
SRI callbacks.
- Handles Rx buffer full framework notifications and provides a general
interface for future extensions.
2. Improved multiple UUID/services per-partition handling
- Adds support for UUID passing in FFA_MSG_SEND2, improving multiple
UUID/service support in the driver.
- Introduces a helper function to check whether a partition can
receive REQUEST2 messages.
3. Partition handling generic improvements
- Implements device unregistration for better partition cleanup.
- Improves handling of the host partition presence in partition info.
4. FF-A version updates
- Upgrades the driver version to FF-A v1.2.
- Rejects major versions higher than the driver version as incompatible.
5. Big-Endian support fixes
- Fixes big-endian issues in:
__ffa_partition_info_regs_get()
__ffa_partition_info_get()
- Big-endian support is still incomplete, and only these changes can
be verified without additional application/testing updates at the
moment. We can discover all the partitions correctly with big-endian
kernel now.
6. Miscellaneous fixes
- Fixes function prototype misalignments in: sync_send_receive{,2}
- Adds explicit type casting for return values from: FFA_VERSION
and NOTIFICATION_INFO_GET
- Corrects vCPU list parsing in ffa_notification_info_get().
7. UUID management in the driver and DMA mask updates
- Replaces UUID buffer with the standard UUID format in ffa_partition_info
structure.
- Fixes a typo in some FF-A bus macros.
- Sets dma_mask for FF-A devices.
In short, this update enhances notification handling, UUID support, and
overall robustness of the FF-A driver while addressing multiple fixes
and cleanups.
* tag 'ffa-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (23 commits)
firmware: arm_ffa: Set dma_mask for ffa devices
firmware: arm_ffa: Skip the first/partition ID when parsing vCPU list
firmware: arm_ffa: Explicitly cast return value from NOTIFICATION_INFO_GET
firmware: arm_ffa: Explicitly cast return value from FFA_VERSION before comparison
firmware: arm_ffa: Handle ffa_notification_get correctly at virtual FF-A instance
firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback
firmware: arm_ffa: Add support for handling framework notifications
firmware: arm_ffa: Add support for {un,}registration of framework notifications
firmware: arm_ffa: Stash ffa_device instead of notify_type in notifier_cb_info
firmware: arm_ffa: Refactoring to prepare for framework notification support
firmware: arm_ffa: Remove unnecessary declaration of ffa_partitions_cleanup()
firmware: arm_ffa: Reject higher major version as incompatible
firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver
firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2
firmware: arm_ffa: Helper to check if a partition can receive REQUEST2 messages
firmware: arm_ffa: Unregister the FF-A devices when cleaning up the partitions
firmware: arm_ffa: Handle the presence of host partition in the partition info
firmware: arm_ffa: Refactor addition of partition information into XArray
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_regs_get()
firmware: arm_ffa: Fix big-endian support in __ffa_partition_info_get()
...
Link: https://lore.kernel.org/r/20250304105928.432997-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.15
Couple of updates around the flexibility in SCMI device names and
addition of name, protocol id attributes and modalias for SCMI
devices in the sysfs.
Currently, in the scmi_protocol_device_request() function, SCMI device
names ust be unique across all protocols. However, this constraint is
being relaxed, allowing devices in different protocols to share the
same name. The change aims to provide more flexibility in naming devices
across various protocols.
Two attributes: name and protocol ID is being added to the SCMI device
in the sysfs along with the support for the modalias. These attributes
aim to enhance device identification and management.
* tag 'scmi-updates-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Emit modalias for SCMI devices
firmware: arm_scmi: Add name and protocol id attributes
firmware: arm_scmi: Relax duplicate name constraint across protocol ids
Link: https://lore.kernel.org/r/20250304105915.432967-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SMCCC update for v6.15
Just a single update introducing the support for the optional SOC_ID
name string from the Arm SMCCC v1.6 specification.
If the SOC_ID name string is implemented, the machine field of the SoC
Device Attributes will reflect it.
The original intent of SOC_ID was to provide a JEP-106 code for the SiP
and the SoC revision to uniquely identify the SoC. However, there has
been a request to add this optional name so that SoC firmware can
directly provide the SoC name to the OS.
This change avoids the need for frequent updates to various tools that
would otherwise require maintaining hardcoded model/machine name tables
for new SoCs.
* tag 'smccc-update-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Support optional Arm SMCCC SOC_ID name
Link: https://lore.kernel.org/r/20250304105845.432813-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge branch 'for-6.14' of
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into
asoc-6.15 to avoid a bunch of add/add conflicts.
|
|
Issue Number 1.6 of the Arm SMC Calling Convention introduces an optional
SOC_ID name string. If implemented, point the 'machine' field of the SoC
Device Attributes at this string so that it will appear under
/sys/bus/soc/devices/soc0/machine.
On Arm SMC compliant SoCs, this will allow things like 'lscpu' to
eventually get a SoC provider model name from there rather than each
tool/utility needing to get a possibly inconsistent, obsolete, or incorrect
model/machine name from its own hardcoded model/machine name table.
Signed-off-by: Paul Benoit <paul@os.amperecomputing.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250219005932.3466-1-paul@os.amperecomputing.com>
(sudeep.holla: Dropped regsize variable and used 8 instead as Mark suggested)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
|
|
Set dma_mask for FFA devices, otherwise DMA allocation using the device pointer
lead to following warning:
WARNING: CPU: 1 PID: 1 at kernel/dma/mapping.c:597 dma_alloc_attrs+0xe0/0x124
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <e3dd8042ac680bd74b6580c25df855d092079c18.1737107520.git.viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Tweak the logic that traverses the MOKVAR UEFI configuration table to
only unmap the entry header and map the next one if they don't live in
the same physical page.
Link: https://lore.kernel.org/all/8f085931-3e9d-4386-9209-1d6c95616327@uncooperative.org/
Tested-By: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
|
|
Retrieve any migration target implementation CPUs using the hypercall
and enable associated errata.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
With ARCH_K3=y we cannot enable TI_SCI_PROTOCOL=m because
ARCH_K3 selects TI_SCI_PROTOCOL.
Modify the logic to enable TI_SCI_PROTOCOL by default when ARCH_K3=y
allowing us to submit a future patch to remove select on ARCH_K3 without
breaking existing users.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20250220-ti-firmware-v2-1-ff26883c6ce9@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Change calls to async regmap write functions to use the normal
blocking writes so that the cs35l56 driver can use spi_bus_lock() to
gain exclusive access to the SPI bus.
As this is part of a fix, it makes only the minimal change to swap the
functions to the blocking equivalents. There's no need to risk
reworking the buffer allocation logic that is now partially redundant.
The async writes are a 12-year-old workaround for inefficiency of
synchronous writes in the SPI subsystem. The SPI subsystem has since
been changed to avoid the overheads, so this workaround should not be
necessary.
The cs35l56 driver needs to use spi_bus_lock() prevent bus activity
while it is soft-resetting the cs35l56. But spi_bus_lock() is
incompatible with spi_async() calls, which will fail with -EBUSY.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The FF-A notification id list received in response to the call
FFA_NOTIFICATION_INFO_GET is encoded as: partition ID followed by 0 or
more vCPU ID. The count includes all of them.
Fix the issue by skipping the first/partition ID so that only the list
of vCPU IDs are processed correctly for a given partition ID. The first/
partition ID is read before the start of the loop.
Fixes: 3522be48d82b ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Reported-by: Andrei Homescu <ahomescu@google.com>
Message-Id: <20250223213909.1197786-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
According to the UEFI Common Platform Error Record appendix, the
processor context information structure is a variable length structure,
but "is padded with zeros if the size is not a multiple of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
According to the UEFI Common Platform Error Record appendix, the
IA32/X64 Processor Context Information Structure is a variable length
structure, but "is padded with zeros if the size is not a multiple
of 16 bytes".
Currently this isn't honoured, causing all but the first structure to
be garbage when printed. Thus align the size to be a multiple of 16.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
|
|
The EFI mixed mode code has been decoupled from the legacy decompressor,
in order to be able to reuse it with generic EFI zboot images for x86.
Move the source file into the libstub source directory to facilitate
this.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The difference between the PE and handover entrypoints in the EFI stub
is that the former allocates a struct boot_params whereas the latter
expects one from the caller. Currently, these are two completely
separate entrypoints, duplicating some logic and both relying of
efi_exit() to return straight back to the firmware on an error.
Simplify this by making the PE entrypoint call the handover entrypoint
with NULL as the argument for the struct boot_params parameter. This
makes the code easier to follow, and removes the need to support two
different calling conventions in the mixed mode asm code.
While at it, move the assignment of boot_params_ptr into the function
that actually calls into the legacy decompressor, which is where its
value is required.
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
