| Age | Commit message (Collapse) | Author |
|---|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-9-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-8-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-7-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-6-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-5-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-4-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-3-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-2-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use spi_get_device_match_data() helper to simplify a bit the driver.
Also kernel_ulong_t type is preferred for kernel code over uintptr_t
(needed for the cast).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240606142515.132504-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
0-day complains:
drivers-hwmon-cros_ec_hwmon.c:sparse:sparse:cast-to-restricted-__le16
Fix by using a __le16 typed variable as parameter to le16_to_cpu().
Fixes: bc3e45258096 ("hwmon: add ChromeOS EC driver")
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240606180507.3332237-1-linux@roeck-us.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The "resp.sensor_name" comes from cros_ec_cmd() and it hasn't necessarily
been NUL terminated. We had not intended to read past "sensor_name_size"
bytes, however, there is a width vs precision bug in the format string.
The format needs to be precision '%.*s' instead of width '%*s'.
Precision prevents an out of bounds read, but width is a no-op.
Fixes: bc3e45258096 ("hwmon: add ChromeOS EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/42331b70-bd3c-496c-8c79-3ec4faad40b8@moroto.mountain
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Add support for g761 PWM Fan Controller.
The g761 is a copy of the g763 with the only difference of supporting
and internal clock. The internal clock is used if no clocks property is
defined in device node and in such case the required bit is enabled and
clock handling is skipped.
The internal clock oscillator runs at 31KHz.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240604164348.542-3-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add PEC support using the hwmon core infrastructure.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240531084645.12935-2-radu.sabau@analog.com
[groeck: Adjusted subject; simplified description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Replace driver specific PEC handling code with hardware monitoring core
functionality.
Cc: Radu Sabau <radu.sabau@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Several hardware monitoring chips optionally support Packet Error Checking
(PEC). For some chips, PEC support can be enabled simply by setting
I2C_CLIENT_PEC in the i2c client data structure. Others require chip
specific code to enable or disable PEC support.
Introduce hwmon_chip_pec and HWMON_C_PEC to simplify adding configurable
PEC support for hardware monitoring drivers. A driver can set HWMON_C_PEC
in its chip information data to indicate PEC support. If a chip requires
chip specific code to enable or disable PEC support, the driver only needs
to implement support for the hwmon_chip_pec attribute to its write
function.
Packet Error Checking is only supported for SMBus devices. HWMON_C_PEC
must therefore only be set by a driver if the parent device is an I2C
device. Attempts to set HWMON_C_PEC on any other device type is not
supported and rejected.
The code calls i2c_check_functionality() to check if PEC is supported
by the I2C/SMBus controller. This function is only available if CONFIG_I2C
is enabled and reachable. For this reason, the added code needs to depend
on reachability of CONFIG_I2C.
Cc: Radu Sabau <radu.sabau@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The ChromeOS Embedded Controller exposes fan speed and temperature
readings.
Expose this data through the hwmon subsystem.
The driver is designed to be probed via the cros_ec mfd device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-2-5cdf0c5db50a@weissschuh.net
[tzungbi: Fixed typo in MAINTAINERS: "chros_ec_hwmon" -> "cros_ec_hwmon"]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The property name is "sensirion,low-precision", not
"sensicon,low-precision".
Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Fixes: be7373b60df5 ("hwmon: shtc1: add support for device tree bindings")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Intel N6000 BMC outputs the board power value in milliwatt, whereas
the hwmon sysfs interface must provide power values in microwatt.
Fixes: e1983220ae14 ("hwmon: intel-m10-bmc-hwmon: Add N6000 sensors")
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Link: https://lore.kernel.org/r/20240521181246.683833-1-peter.colberg@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Controller
Add support for NZXT RGB & Fan Controller with USB ID 1e71:2020.
Fan speed control reported to be working with existing userspace (hidraw)
software, so it should be compatible. Fan channel count is the same.
No known differences from already supported devices, at least regarding
fan speed control and initialization.
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Link: https://lore.kernel.org/r/20240524004040.121044-1-mezin.alexander@gmail.com
[groeck: Adjusted subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
A new error path was added to the fwnode_for_each_available_node() loop
in ltc2992_parse_dt(), which leads to an early return that requires a
call to fwnode_handle_put() to avoid a memory leak in that case.
Add the missing fwnode_handle_put() in the error path from a zero value
shunt resistor.
Cc: stable@vger.kernel.org
Fixes: 10b029020487 ("hwmon: (ltc2992) Avoid division by zero")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240523-fwnode_for_each_available_child_node_scoped-v2-1-701f3a03f2fb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the usb id of the HX1200i Series 2023. Update the documentation
accordingly. Also fix the version comments, there are no Series 2022
products. That are legacy or first version products going back many
many years.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZlAZs4u0dU7JxtDf@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
A user reported that he needs to disable BIOS fan control on his
Dell G15 5511 in order to be able to control the fans.
Closes: https://github.com/Wer-Wolf/i8kutils/issues/5
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240522210809.294488-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Enabling the driver for devices with unknown customer ID is at least
somewhat risky, so add a warning to the kernel log.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for reporting firmware and bootloader version using debugfs.
Update documentation accordingly.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240513194734.43040-2-mail@mariuszachmann.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart for the normal updates for dt bindings, cleanups and support for
new device variants to existing drivers this completes the conversion
to pwmchip_alloc() which was started in the v6.9 development cycle.
Using pwmchip_alloc() is a precondition to the character device
support which allows easier and faster access to PWM devices. However
there are some issues I want to clean up before including it in
mainline, so this isn't contained here despite it was in next for some
time.
Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George
Stark, Jerome Brunet and Varshini Rajendran for their contributions.
Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David
Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A.
R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch
review"
* tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits)
pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0
dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice
dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice
dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice
dt-bindings: pwm: bcm2835: Do not require pwm-cells twice
pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating
pwm: meson: Add check for error from clk_round_rate()
pwm: meson: Drop unneeded check in .get_state()
dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC
pwm: meson: Add generic compatible for meson8 to sm1
pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get()
pwm: bcm2835: Introduce a local variable for &pdev->dev
pwm: stm32: Calculate prescaler with a division instead of a loop
pwm: stm32: Fix for settings using period > UINT32_MAX
pwm: stm32: Improve precision of calculation in .apply()
pwm: stm32: Add error messages in .probe()'s error paths
pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata()
pwm: Don't check pointer for being non-NULL after use
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon XDP710
- EC Chip driver for Lenovo ThinkStation motherboards
- Analog Devices ADP1050
Improved support for existing drivers:
- emc1403: Convert to with_info API; Support for EMC1428 and EMC1438
- nzxt-kraken3: Support for NZXT Kraken 2023
- aquacomputer_d5next: Support for Octo flow sensors
- pmbus/adm1275: Support for ADM1281
- dell-smm: Supportt for Precision 7540 and G5 5505
Other notable cleanup:
- max6639: Use regmap
- Remove unused structure fields from multiple drivers
- Drop explicit initialization of struct i2c_device_id::driver_data
to zero
- Improve configuration mode handling in it87 driver
- jc42: Drop support for I2C_CLASS_SPD
- Various conversions to devicetree schema
- Add HAS_IOPORT dependencies as needed
Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"
* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
hwmon: (nzxt-kraken3) Bail out for unsupported device variants
hwmon: (emc1403) Add support for EMC1428 and EMC1438.
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
hwmon: (emc1403) Add support for conversion interval configuration
hwmon: (emc1403) Support 11 bit accuracy
hwmon: (emc1403) Convert to with_info API
hwmon: (max6639) Use regmap
hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
hwmon: (stts751) Remove an unused field in struct stts751_priv
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
hwmon: (max31790) revise the scale to write pwm
hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
hwmon: (nzxt-kraken3) Decouple device names from kinds
hwmon: (it87) Remove tests nolonger required
hwmon: (it87) Test for chipset before entering configuration mode
hwmon: (it87) Do not enter configuration mode for some chiptypes
hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
hwmon: (pmbus) Add support for Infineon XDP710
dt-bindings: hwmon: Add infineon xdp710 driver bindings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
|
|
Dan Carpenter reports:
Commit cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names
from kinds") from Apr 28, 2024 (linux-next), leads to the following
Smatch static checker warning:
drivers/hwmon/nzxt-kraken3.c:957 kraken3_probe()
error: uninitialized symbol 'device_name'.
Indeed, 'device_name' will be uninitizalized if an unknown product is
encountered. In practice this should not matter because the driver
should not instantiate on unknown products, but lets play safe and
bail out if that happens.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/b1738c50-db42-40f0-a899-9c027c131ffb@moroto.mountain/
Cc: Jonas Malaco <jonas@protocubo.io>
Cc: Aleksa Savic <savicaleksa83@gmail.com>
Fixes: cbeb479ff4cd ("hwmon: (nzxt-kraken3) Decouple device names from kinds")
Acked-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
EMC1428 and EMC1438 are similar to EMC14xx, but have eight temperature
channels, as well as signed data and limit registers. Chips currently
supported by this driver have unsigned registers only.
Signed-off-by: Lars Petter Mostad <larspm@gmail.com>
Link: https://lore.kernel.org/r/20240510142824.824332-1-lars.petter.mostad@appear.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
0 (part 2)
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
This is a follow up to commit d8a66f3621c2 ("hwmon: Drop explicit
initialization of struct i2c_device_id::driver_data to 0") which I
created before identifying a few corner cases in my conversion script.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072027.2119857-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The final return in adc128d818_probe() can be simplified by using
PTR_ERR_OR_ZERO rather than an if statement.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240506-regulator-devm_regulator_get_enable_read_voltage-fixes-v1-2-356cdd152067@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/23c2031acaa64f1c02f00e817c3f7e4466d17ab2.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in ccp_raw_event() may happen in
parallel to a send_usb_cmd() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() in ccp_raw_event() and
reinit_completion() in send_usb_cmd() to prevent race issues.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-4-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ccp_raw_event()
In ccp_raw_event(), the ccp->wait_input_report completion is
completed once. Since we're waiting for exactly one report in
send_usb_cmd(), use complete_all() instead of complete()
to mark the completion as spent.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Introduce cmd_buffer, a separate buffer for storing only
the command that is sent to the device. Before this separation,
the existing buffer was shared for both the command and the
report received in ccp_raw_event(), which was copied into it.
However, because of hidraw, the raw event parsing may be triggered
in the middle of sending a command, resulting in outputting gibberish
to the device. Using a separate buffer resolves this.
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Acked-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20240504092504.24158-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add regmap support & remove local caching.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240503120020.3450972-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-3-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can reduce boilerplate code and eliminate the driver remove()
function by using devm_regulator_get_enable_read_voltage().
A new external_vref flag is added since we no longer have the handle
to the regulator to check if it is present.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-2-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
npcm7xx_cooling_device
In "struct npcm7xx_cooling_device", the 'pwm_clk_freq' field is only
written and never used.
Remove it and update npcm7xx_pwm_init() accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ff738663d40ac5ae3d0b4d2e688ff7e36032be8.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct npcm7xx_cooling_device", the 'fan_clk_freq' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/74eee8aa739f94b8c6425ce3e37a427ca92243ea.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct stts751_priv", the 'smbus_timeout' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94ccf9caaa6b0101351bf381f09f4428c5e0835c.1714511322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since the value for PWMOUT Target Duty Cycle register is a 9 bit
left-justified value that ranges from 0 to 511 and is contained in 2
bytes.
There is an issue that the PWM signal recorded by oscilloscope would
not be on consistently if we set PWM to 100% to the driver.
It is because the LSB of the 9 bit would always be zero if it just
left shift 8 bit for the value that write to PWMOUT Target Duty
Cycle register.
Therefore, revise the scale of the value that was written to pwm input
from 255 to 511 and modify the value to left-justified value.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240416022211.859483-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
models
Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite
all-in-one CPU coolers. These models communicate identically to the NZXT
Kraken Z-series (Z53 code paths) in all cases except when writing the
fan curve, where setting additional bits in the report is needed.
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Prepare for the support of new models, for which the relationship
between device name (for hwmon and debugfs) and kind (for the selection
of appropriate code paths within this driver) will no longer be 1:1.
Originally-from: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240428104812.14037-2-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
