summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2025-05-29Merge tag 'platform-drivers-x86-v6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: "The changes are mostly business as usual. Besides pdx86 changes, there are a few power supply changes needed for related pdx86 features, move of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version warning to hid-asus. Highlights: - alienware-wmi-wmax: - Add HWMON support - Add ABI and admin-guide documentation - Expose GPIO debug methods through debug FS - Support manual fan control and "custom" thermal profile - amd/hsmp: - Add sysfs files to show HSMP telemetry - Report power readings and limits via hwmon - amd/isp4: Add AMD ISP platform config for OV05C10 - asus-wmi: - Refactor Ally suspend/resume to work better with older FW - hid-asus: check ROG Ally MCU version and warn about old FW versions - dasharo-acpi: - Add driver for Dasharo devices supporting fans and temperatures monitoring - dell-ddv: - Expose the battery health and manufacture date to userspace using power supply extensions - Implement the battery matching algorithm - dell-pc: - Improve error propagation - Use faux device - int3472: - Add delays to avoid GPIO regulator spikes - Add handshake pin support - Make regulator supply name configurable and allow registering more than 1 GPIO regulator - Map mt9m114 powerdown pin to powerenable - intel/pmc: Add separate SSRAM Telemetry driver - intel-uncore-freq: Add attributes to show agent types and die ID - ISST: - Support SST-TF revision 2 (allows more cores per bucket) - Support SST-PP revision 2 (fabric 1 frequencies) - Remove unnecessary SST MSRs restore (the package retains MSRs despite CPU offlining) - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640 - mellanox: mlxbf-pmc: Support additional PMC blocks - oxpec: - Add OneXFly variants - Add support for charge limit, charge thresholds, and turbo LED - Distinguish current X1 variants to avoid unwanted matching to new variants - Follow hwmon conventions - Move from hwmon/oxp-sensors to platform/x86 to match the enlarged scope - power supply: - Add inhibit-charge-awake (needed by oxpec) - Add additional battery health status values ("blown fuse" and "cell imbalance") (needed by dell-ddv) - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog - thinkpad-acpi: Support camera shutter switch hotkey - tuxedo: Add virtual LampArray for TUXEDO NB04 devices - tools/power/x86/intel-speed-select: - Support displaying SST-PP revision 2 fields - Skip uncore frequency update on newer generations of CPUs - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits) thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m platform/x86: asus-wmi: fix build without CONFIG_SUSPEND docs: ABI: Fix "aassociated" to "associated" platform/x86: Add AMD ISP platform config for OV05C10 Documentation: admin-guide: pm: Add documentation for die_id platform/x86/intel-uncore-freq: Add attributes to show die_id platform/x86/intel: power-domains: Add interface to get Linux die ID Documentation: admin-guide: pm: Add documentation for agent_types platform/x86/intel-uncore-freq: Add attributes to show agent types platform/x86/tuxedo: Prevent invalid Kconfig state platform/x86: dell-ddv: Expose the battery health to userspace platform/x86: dell-ddv: Expose the battery manufacture date to userspace platform/x86: dell-ddv: Implement the battery matching algorithm power: supply: core: Add additional health status values platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry platform/x86/amd/hsmp: Report power via hwmon sensors platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules platform/mellanox: mlxreg-dpu: Fix smatch warnings platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug ...
2025-05-13Merge branch 'x86/msr' into x86/core, to resolve conflictsIngo Molnar
Conflicts: arch/x86/boot/startup/sme.c arch/x86/coco/sev/core.c arch/x86/kernel/fpu/core.c arch/x86/kernel/fpu/xstate.c Semantic conflict: arch/x86/include/asm/sev-internal.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-05-02x86/msr: Add explicit includes of <asm/msr.h>Xin Li (Intel)
For historic reasons there are some TSC-related functions in the <asm/msr.h> header, even though there's an <asm/tsc.h> header. To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h> to <asm/tsc.h> and to eventually eliminate the inclusion of <asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency to the source files that reference definitions from <asm/msr.h>. [ mingo: Clarified the changelog. ] Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
2025-04-30platform/x86: oxpec: Move hwmon/oxp-sensors to platform/x86Antheas Kapenekakis
The EC of OneXPlayer devices used to only control the fan. This is no longer the case, with the EC of OneXPlayer gaining additional functionality (turbo button, turbo led, battery controls). As it will be beneficial from a complexity perspective to retain this driver as a single unit, move it out of hwmon, and into platform/x86. Also, remove the hwmon documentation to prepare moving it to Documentation/ABI/. While at it, add myself to the maintainer's file. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-25hwmon: (oxp-sensors) Add all OneXFly variantsAntheas Kapenekakis
Currently, the driver only has the F1 OneXFly variant, which was based on the 7000 AMD platform. Add its special editions: F1 EVA-01, F1 OLED. F1 OLED might have been a dev unit, but it is supported by OneXConsole with the same features so add it. Then add the F1L variant which is based on the 8000 AMD platform and the F1Pro and its special edition EVA-02. One might ask why not just fuzzy match. Well, EVA-02 is a variant of F1Pro which is a Strix Point handheld, but does not have F1Pro in its name. This makes it risky to fuzzy match, as special variants in the future from different platforms might not have the same feature set or registers. By happenstance, all current devices use the same registers. For the charge limitting feature on this series, only F1Pro/X1 (AMD) were released with it, but OneXPlayer is providing bios updates for F1, F1L, X1 Mini units that use the same register, so treat all of them the same. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250425111821.88746-3-lkml@antheas.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-25hwmon: (oxp-sensors) Distinguish the X1 variantsAntheas Kapenekakis
Currently, the oxp-sensors driver fuzzy matches the X1 variants. Luckily, X1 and X1 mini share most hardware features so this works. However, they are completely different product lines, and there is an expectation that OneXPlayer will release more devices in the X1 line that may have differences. Therefore, distinguish the 3 devices that currently exist in the market. These are the OneXPlayer X1 AMD and Intel variants, and the X1 mini which only has an AMD variant. As far as registers go, all three support the current driver functionality. Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250425111821.88746-2-lkml@antheas.dev Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-14x86/platform/amd: Move the <asm/amd_node.h> header to <asm/amd/node.h>Ingo Molnar
Collect AMD specific platform header files in <asm/amd/*.h>. Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mario Limonciello <superm1@kernel.org> Link: https://lore.kernel.org/r/20250413084144.3746608-7-mingo@kernel.org
2025-04-10x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()'Ingo Molnar
Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Xin Li <xin@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-26Merge tag 'platform-drivers-x86-v6.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: - alienware-wmi: - Refactor and split WMAX/legacy drivers - dell-ddv: - Correct +0.1 offset in temperature - Use the power supply extension mechanism for battery temperatures - intel/pmc: - Refactor init to mostly use a common init function - Add support for Arrow Lake U/H - Add support for Panther Lake - intel/sst: - Improve multi die handling - Prefix header search path with sysroot (fixes cross-compiling) - lenovo-wmi-hotkey-utilities: - Support for mic & audio mute LEDs - samsung-galaxybook: - Add driver for Samsung Galaxy Book series - wmi: - Rework WCxx/WExx ACPI method handling - Enable data block collection when the data block is set - platform/arm: - Add Huawei Matebook E Go EC driver - platform/mellanox: - Relocate to drivers/platform/mellanox/ - mlxbf-bootctl: - RTC battery status sysfs support - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits) platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig platform/x86/amd/pmf: convert timeouts to secs_to_jiffies() platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies() irqdomain: platform/x86: Switch to irq_domain_create_linear() platform/x86/amd/pmc: fix leak in probe() tools/power/x86/intel-speed-select: v1.22 release tools/power/x86/intel-speed-select: Prefix header search path with sysroot tools/power/x86/intel-speed-select: Die ID for IO dies tools/power/x86/intel-speed-select: Fix the condition to check multi die system tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE platform/x86/amd/pmc: Use managed APIs for mutex platform/x86/amd/pmc: Remove unnecessary line breaks platform/x86/amd/pmc: Move macros and structures to the PMC header file platform/x86/amd/pmc: Notify user when platform does not support s0ix transition platform/x86: dell-ddv: Use the power supply extension mechanism platform/x86: dell-ddv: Use devm_battery_hook_register platform/x86: dell-ddv: Fix temperature calculation platform/x86: thinkpad_acpi: check the return value of devm_mutex_init() platform/x86: samsung-galaxybook: Fix block_recording not supported logic platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static ...
2025-03-25Merge tag 'hwmon-for-v6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for HTU31 - Congatec Board Controller monitoring driver - Driver for TI INA233 Current and Power Monitor Support for additional chips or boards in existing drivers: - pmbus/ltc2978: Add support for LT717x and LTM4673 - asus-ec-sensors: Add PRIME X670E-PRO WIFI - k10temp: Add support for cyan skillfish - nct6683: Add customer ID for AMD BC-250 - lm90: Add support for NCT7716, NCT7717 and NCT7718 Other notable improvements in existing drivers: - emc2305: Add devicetree support, and use devm_thermal_of_cooling_device_register - acpi_power_meter: Convert to with_info API - dell-smm: Increase the number of fans - pmbus/core: Optimize debugfs support and use i2c_client debugfs directory - hwmon core: Fix the missing of 'average' word in hwmon_power_attr_templates - Various drivers: Use per-client debugfs entry provided by I2C subsystem" * tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits) hwmon: emc2305: Use devm_thermal_of_cooling_device_register hwmon: emc2305: Add OF support dt-bindings: hwmon: Add Microchip emc2305 support dt-bindings: hwmon: Drop stray blank line in the header hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register hwmon: add driver for HTU31 dt-bindings: hwmon: Add description for sensor HTU31 hwmon: Add driver for TI INA233 Current and Power Monitor dt-bindings: hwmon: ti,ina2xx: Add INA233 device hwmon: Add Congatec Board Controller monitoring driver hwmon: (pmbus/ltc2978) add support for lt717x dt-bindings: hwmon: ltc2978: add support for LT717x hwmon: (pmbus/ltc2978) Add support for LT717x - docs hwmon: (dell-smm) Increment the number of fans hwmon: (ntc_thermistor) return error instead of clipping on OOB hwmon: (pt5161l) Use per-client debugfs entry hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates hwmon: (acpi_power_meter) Fix the fake power alarm reporting hwmon: (gpio-fan) Add missing mutex locks dt-bindings: hwmon: gpio-fan: Add optional regulator support ...
2025-03-21hwmon: emc2305: Use devm_thermal_of_cooling_device_registerFlorin Leotescu
Prepare the emc2305 driver to use configuration from Device Tree nodes. Switch to devm_thermal_of_cooling_device_register to simplify the cleanup procedure, allowing the removal of emc2305_unset_tz and emc2305_remove, which are no longer needed. Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250321143308.4008623-4-florin.leotescu@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-21hwmon: emc2305: Add OF supportFlorin Leotescu
Introduce OF support for Microchip emc2305 pwm fan controller. Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250321143308.4008623-3-florin.leotescu@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-21hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_registerHuisong Li
When load this mode, we can see the following log: "power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info()." So replace hwmon_device_register with hwmon_device_register_with_info. These attributes, 'power_accuracy', 'power_cap_hyst', 'power_average_min' and 'power_average_max', should have been placed in hwmon_chip_info as power data type. But these attributes are displayed as string format on the following case: a) power1_accuracy --> display like '90.0%' b) power1_cap_hyst --> display 'unknown' when its value is 0xFFFFFFFF c) power1_average_min/max --> display 'unknown' when its value is negative. To avoid any changes in the display of these sysfs interfaces, we can't modifiy the type of these attributes in hwmon core and have to put them to extra_groups. Please note that the path of these sysfs interfaces are modified accordingly if use hwmon_device_register_with_info(): old: all sysfs interfaces are under acpi device, namely, /sys/class/hwmon/hwmonX/device/ now: all sysfs interfaces are under hwmon device, namely, /sys/class/hwmon/hwmonX/ The new ABI does not guarantee that the underlying path remains the same. But we have to accept this change so as to replace the deprecated API. Fortunately, some userspace application, like libsensors, would scan the two path and handles this automatically. So we can accept this change so as to drop the deprecated message. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://lore.kernel.org/r/20250319020638.59925-1-lihuisong@huawei.com [groeck: Fixed some multi-line alignment issues; reverted to 32-bit arithmetic in power1_accuracy_show() fixed bad return code from power_meter_is_visible()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-18hwmon: add driver for HTU31Andrei Lalaev
Add base support for HTU31 temperature and humidity sensor. Besides temperature and humidity values, the driver also exports a 24-bit heater control to sysfs and serial number to debugfs. Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com> Link: https://lore.kernel.org/r/20250217051110.46827-2-andrey.lalaev@gmail.com [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-18hwmon: Add driver for TI INA233 Current and Power MonitorLeo Yang
Driver for Texas Instruments INA233 Current and Power Monitor With I2C-, SMBus-, and PMBus-Compatible Interface Signed-off-by: Leo Yang <leo.yang.sy0@gmail.com> Link: https://lore.kernel.org/r/20250116085939.1235598-3-leo.yang.sy0@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-17hwmon: Add Congatec Board Controller monitoring driverThomas Richard
Add support for the Congatec Board Controller. This controller exposes temperature, voltage, current and fan sensors. The available sensors list cannot be predicted. Some sensors can be present or not, depending the system. The driver has an internal list of all possible sensors, for all Congatec boards. The Board Controller gives to the driver its sensors list, and their status (active or not). Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20250203-congatec-board-controller-hwmon-v4-1-ff6c76a4662c@bootlin.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-17hwmon: (pmbus/ltc2978) add support for lt717xKim Seer Paller
Add support for LT7170 and LT7171. The LT7170 and LT7171 are 20 A, 16 V, Single- or Dual-Phase, Silent Switcher Step-Down Regulators with Digital Power System Management. The relevant registers in the LT7170 and LT7171 are similar to those in the LTC3887, but with fewer channels. This adds the chip ID and identification of ASCII to differentiate between the LT7170 and LT7171. These devices support polling for status updates and clearing peak values. The data format for voltage, current, and temperature is set to IEEE754 for precision and compatibility. Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com> Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-3-da0218c38197@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-17hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9}Tasos Sahanidis
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and NCT6776_PWM_MODE_MASK only contain 6 values. Fix this by adding another 0 to the end of each array. Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-11hwmon: (dell-smm) Increment the number of fansKurt Borja
Some Alienware laptops that support the SMM interface, may have up to 4 fans. Tested on an Alienware x15 r1. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250304055249.51940-2-kuurtb@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-07hwmon: (ntc_thermistor) return error instead of clipping on OOBMaud Spierings
When the ntc is reading Out Of Bounds instead of clipping to the nearest limit (min/max) return -ENODATA. This prevents malfunctioning sensors from sending a device into a shutdown loop due to a critical trip. This implementation will only work for ntc type thermistors if a ptc type is to be implemented the min/max ohm calculation must be adjusted to take that into account. Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Link: https://lore.kernel.org/r/20250307-ntc_oob-v2-1-bba2d32b1a8e@gocontroll.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-05hwmon: (pt5161l) Use per-client debugfs entryWolfram Sang
The I2C core now offers a debugfs-directory per client. Use it and remove the custom handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250305123149.16990-2-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-04hwmon: Fix the missing of 'average' word in hwmon_power_attr_templatesHuisong Li
The string "power%d_interval_max" and "power%d_interval_min" in the hwmon_power_attr_templates[] are corresponding to the sysfs interface name of hwmon_power_average_interval_max and hwmon_power_average_interval_min. But the 'average' word is missing in two strings. Fortunately, there is no driver to use it yet. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://lore.kernel.org/r/20250304074640.2770353-1-lihuisong@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-03hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()Xinghuo Chen
The devm_memremap() function returns error pointers on error, it doesn't return NULL. Fixes: c7cefce03e69 ("hwmon: (xgene) access mailbox as RAM") Signed-off-by: Xinghuo Chen <xinghuo.chen@foxmail.com> Link: https://lore.kernel.org/r/tencent_9AD8E7683EC29CAC97496B44F3F865BA070A@qq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (acpi_power_meter) Fix the fake power alarm reportingHuisong Li
We encountered a problem that a fake power alarm is reported to user on the platform unsupported notifications at the second step below: 1> Query 'power1_alarm' attribute when the power capping occurs. 2> Query 'power1_alarm' attribute when the power capping is over and the current average power is less then power cap value. The root cause is that the resource->power_alarm is set to true at the first step. And power meter use this old value to show the power alarm state instead of the current the comparison value. Signed-off-by: Huisong Li <lihuisong@huawei.com> Link: https://lore.kernel.org/r/20250220030832.2976-1-lihuisong@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (gpio-fan) Add missing mutex locksAlexander Stein
set_fan_speed() is expected to be called with fan_data->lock being locked. Add locking for proper synchronization. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20250210145934.761280-3-alexander.stein@ew.tq-group.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Report content of CAPABILITY register in debugfsGuenter Roeck
Report the value of the CAPABILITY register in debugfs if supported. Only check if the register is supported if PMBUS_NO_CAPABILITY is not set. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Optimize debugfs status attribute initializationGuenter Roeck
Define debugfs attributes used to access status registers in a data structure and loop through it instead of creating debugfs files one by one. This reduces code size and simplifies adding additional attributes if needed. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Optimize debugfs block data attribute initializationGuenter Roeck
Define debugfs attributes which need block data access in a data structure and loop through it instead of creating debugfs files one by one. This reduces code size and simplifies adding additional attributes if needed. While this is currently only used for manufacturer specific attributes, the access code is generic and also works for other block attributes, so rename operation functions from _mfg to _block. While at it, rename the "revison" file to "pmbus_revision" to make its meaning more obvious and to create a clear distinction against the "mfg_revision" file. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Declare regulator notification function as voidGuenter Roeck
The regulator notification function never returns an error. Declare it as void. While at it, fix its indentation. No functional change. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Make debugfs code unconditionalGuenter Roeck
Drop contitionals around debugfs code to compile it unconditionally. In practice it will be optimized away by the compiler if CONFIG_DEBUG_FS is not enabled, so the code size is not affected by this change. Also silently ignore errors if debugfs initialization fails. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Use the new i2c_client debugfs directoryGuenter Roeck
The I2C core now manages a debugfs directory per I2C client. PMBus has its own debugfs hierarchy. Link the two, so a user will be pointed to the I2C domain from the PMBus domain. Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Use local debugfs variable in debugfs initializationGuenter Roeck
In preparation for the next patch in the series, use a local debugfs variable during debugfs initialization. No functional change intended. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Fix various coding style issuesGuenter Roeck
Checkpatch reports bad multi-line comments, bad multi-line alignments, missing blank lines after variable declarations, unnecessary empty lines, unnecessary spaces, and unnecessary braces. Fix most of the reported problems except for some multi-line alignment problems. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (ad7314) Validate leading zero bits and return errorErik Schumacher
Leading zero bits are sent on the bus before the temperature value is transmitted. If any of these bits are high, the connection might be unstable or there could be no AD7314 / ADT730x (or compatible) at all. Return -EIO in that case. Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com> Fixes: 4f3a659581cab ("hwmon: AD7314 driver (ported from IIO)") Link: https://lore.kernel.org/r/24a50c2981a318580aca8f50d23be7987b69ea00.camel@iris-sensing.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (asus-ec-sensors) add PRIME X670E-PRO WIFIShengyu Qu
Add support for PRIME X670E-PRO WIFI. Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Link: https://lore.kernel.org/r/TYCPR01MB84377BEADF97E8E7554EF0CF98C32@TYCPR01MB8437.jpnprd01.prod.outlook.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (ntc_thermistor) Fix module name in the KconfigMaud Spierings
The module name is incorrectly stated with a hyphen while it is an underscore. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-1-70fa73200b52@gocontroll.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor tableMaud Spierings
I could not find a single table that has the values currently present in the table, change it to the actual values that can be found in [1]/[2] and [3] (page 15 column 2) [1]: https://www.murata.com/products/productdetail?partno=NCP15XH103F03RC [2]: https://www.murata.com/products/productdata/8796836626462/NTHCG83.txt?1437969843000 [3]: https://nl.mouser.com/datasheet/2/281/r44e-522712.pdf Fixes: 54ce3a0d8011 ("hwmon: (ntc_thermistor) Add support for ncpXXxh103") Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-3-70fa73200b52@gocontroll.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus/core) Replace deprecated strncpy() with strscpy()Thorsten Blum
strncpy() is deprecated for NUL-terminated destination buffers; use strscpy() instead. Compile-tested only. Note(groeck): strscpy() uses sizeof() to determine the length of the destination buffer if it is not provided as argument. Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250227173936.7746-2-thorsten.blum@linux.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (pmbus) Initialise page count in pmbus_identify()Titus Rwantare
The `pmbus_identify()` function fails to correctly determine the number of supported pages on PMBus devices. This occurs because `info->pages` is implicitly zero-initialised, and `pmbus_set_page()` does not perform writes to the page register if `info->pages` is not yet initialised. Without this patch, `info->pages` is always set to the maximum after scanning. This patch initialises `info->pages` to `PMBUS_PAGES` before the probing loop, enabling `pmbus_set_page()` writes to make it out onto the bus correctly identifying the number of pages. `PMBUS_PAGES` seemed like a reasonable non-zero number because that's the current result of the identification process. Testing was done with a PMBus device in QEMU. Signed-off-by: Titus Rwantare <titusr@google.com> Fixes: 442aba78728e7 ("hwmon: PMBus device driver") Link: https://lore.kernel.org/r/20250227222455.2583468-1-titusr@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (k10temp) add support for cyan skillfishMikhail Paulyshka
Add support for Cyan Skillfish (AMD Family 17h Model 47h), which appear to be Zen 2 based APU. The patch was tested with an AMD BC-250 board. Signed-off-by: Mikhail Paulyshka <me@mixaill.net> Link: https://lore.kernel.org/r/20250302155009.49951-1-me@mixaill.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-02hwmon: (nct6683) Add customer ID for AMD BC-250Mikhail Paulyshka
This value was found on an AMD BC-250 board with an NCT6686D chip. Signed-off-by: Mikhail Paulyshka <me@mixaill.net> Link: https://lore.kernel.org/r/20250302155053.50096-1-me@mixaill.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-24hwmon: (peci/dimmtemp) Do not provide fake thresholds dataPaul Fertser
When an Icelake or Sapphire Rapids CPU isn't providing the maximum and critical thresholds for particular DIMM the driver should return an error to the userspace instead of giving it stale (best case) or wrong (the structure contains all zeros after kzalloc() call) data. The issue can be reproduced by binding the peci driver while the host is fully booted and idle, this makes PECI interaction unreliable enough. Fixes: 73bc1b885dae ("hwmon: peci: Add dimmtemp driver") Fixes: 621995b6d795 ("hwmon: (peci/dimmtemp) Add Sapphire Rapids support") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20250123122003.6010-1-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-24hwmon: (hp-wmi-sensors) Use the WMI bus API when accessing sensorsArmin Wolf
Since the driver already binds to HP_WMI_NUMERIC_SENSOR_GUID, using wmidev_block_query() allows for faster sensor access. Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: James Seo <james@equiv.tech> Reviewed-by: James Seo <james@equiv.tech> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250216193251.866125-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-06hwmon: (xgene-hwmon) use appropriate type for the latency valueAndrey Vatoropin
The expression PCC_NUM_RETRIES * pcc_chan->latency is currently being evaluated using 32-bit arithmetic. Since a value of type 'u64' is used to store the eventual result, and this result is later sent to the function usecs_to_jiffies with input parameter unsigned int, the current data type is too wide to store the value of ctx->usecs_lat. Change the data type of "usecs_lat" to a more suitable (narrower) type. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Link: https://lore.kernel.org/r/20250204095400.95013-1-a.vatoropin@crpt.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-06hwmon: (sg2042) Add back module description/author tagsArnd Bergmann
A previous code reorganization inadvertently dropped the two tags, which leads to a "make W=1" warning: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/sg2042-mcu.o Add these back. Fixes: cd4db38c4368 ("hwmon: (sg2042) Use per-client debugfs entry") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250205121419.373464-1-arnd@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-02hwmon: (sht3x) Use per-client debugfs entryWolfram Sang
The I2C core now offers a debugfs-directory per client. Use it and remove the custom handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250131095148.11973-2-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-02hwmon: (tps23861) Use per-client debugfs entryWolfram Sang
The I2C core now offers a debugfs-directory per client. Use it and remove the custom handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250125123941.36729-14-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-02hwmon: (sg2042) Use per-client debugfs entryWolfram Sang
The I2C core now offers a debugfs-directory per client. Use it and remove the custom handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250125123941.36729-12-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-02-02hwmon: (ltc4282) Use per-client debugfs entryWolfram Sang
The I2C core now offers a debugfs-directory per client. Use it and remove the custom handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250125123941.36729-10-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-07-15 08:50:30 +0000