| Age | Commit message (Collapse) | Author |
|---|
|
Both devm_pm_runtime_enable() and pm_runtime_resume_and_get()
return 0 or a negative error code.
Simplify the checks done with their respective return values
accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250212182034.366167-7-fabrizio.castro.jz@renesas.com
|
|
Make use of dev_err_probe() to simplify rzg2l_irqc_common_init().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-6-fabrizio.castro.jz@renesas.com
|
|
No need to keep label `pm_put`, as it's only used once.
Call pm_runtime_put() directly from the error path.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-5-fabrizio.castro.jz@renesas.com
|
|
Simplify rzg2l_irqc_common_init() by using devm_pm_runtime_enable().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250212182034.366167-4-fabrizio.castro.jz@renesas.com
|
|
Use devm_reset_control_get_exclusive_deasserted() to simplify
rzg2l_irqc_common_init().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-3-fabrizio.castro.jz@renesas.com
|
|
Replace direct references to `&pdev->dev` with the local `dev` pointer
in rzg2l_irqc_common_init() to avoid redundant dereferencing.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-2-fabrizio.castro.jz@renesas.com
|
|
rzg2l_irqc_common_init() calls of_find_device_by_node(), but the
corresponding put_device() call is missing. This also gets reported by
make coccicheck.
Make use of the cleanup interfaces from cleanup.h to call into
__free_put_device(), which in turn calls into put_device when leaving
function rzg2l_irqc_common_init() and variable "dev" goes out of scope.
To prevent that the device is put on successful completion, assign NULL to
"dev" to prevent __free_put_device() from calling into put_device() within
the successful path.
"make coccicheck" will still complain about missing put_device() calls,
but those are false positives now.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241011172003.1242841-1-fabrizio.castro.jz@renesas.com
|
|
The order of function calls in the disable operation should be the reverse
of that in the enable operation. Thus, reorder the function calls to first
disable the parent IRQ chip before disabling the TINT IRQ.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240606194813.676823-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The IX45 block has additional mask registers (NMSK/IMSK/TMSK) compared
to the RZ/G2L (family) SoC.
A new rzfive_irqc_chip irq_chip is introduced for RZ/Five, where function
pointers for irq_[un]mask() and irq_[dis|en]able() handle the ([un]masking
of the interrupts. The irq_chip pointer is now passed as an init callback
and stored in the priv pointer to differentiate between RZ/G2L and RZ/Five.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240604173710.534132-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Simplify rzg2l_irqc_irq_{en,dis}able() by moving common code to
rzg2l_tint_irq_endisable().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
As per the hardware team, TIEN and TINT source should not set at the same
time due to a possible hardware race leading to spurious IRQ.
Currently on some scenarios hardware settings for TINT detection is not in
sync with TINT source as the enable/disable overrides source setting value
leading to hardware inconsistent state. For eg: consider the case GPIOINT0
is used as TINT interrupt and configuring GPIOINT5 as edge type. During
rzg2l_irq_set_type(), TINT source for GPIOINT5 is set. On disable(),
clearing of the entire bytes of TINT source selection for GPIOINT5 is same
as GPIOINT0 with TIEN disabled. Apart from this during enable(), the
setting of GPIOINT5 with TIEN results in spurious IRQ as due to a HW race,
it is possible that IP can use the TIEN with previous source value
(GPIOINT0).
So, just update TIEN during enable/disable as TINT source is already set
during rzg2l_irq_set_type(). This will make the consistent hardware
settings for detection method tied with TINT source and allows to simplify
the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
RZ/G2L interrupt chips require that the interrupt is masked before changing
the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge
trigger type it is required to clear the interrupt status register in order
to avoid spurious interrupts.
The current implementation fails to do either of that and therefore is
prone to generate spurious interrupts when setting the trigger type.
Address this by:
- Ensuring that the interrupt is masked at the chip level across the
update for the TINT chip
- Clearing the interrupt status register after updating the trigger mode
for edge type interrupts
[ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as
the set_type() callback is always called with interrupts disabled. ]
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by
removing redundant priv local variable.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by
removing redundant priv and hw_irq local variables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant
interrupt cause bit in the TSCR register by writing to it.
This write is not sufficient because the write is posted and therefore not
guaranteed to immediately clear the bit. Due to that delay the CPU can
raise the just handled interrupt again.
Prevent this by reading the register back which causes the posted write to
be flushed to the hardware before the read completes.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The irqchip-renesas-rzg2l driver is used on RZ/G3S SoC. RZ/G3S can go into
deep sleep states where power to different SoC's parts is cut off and RAM
is switched to self-refresh. The resume from these states is done with the
help of the bootloader.
The IA55 IRQ controller needs to be reconfigured when resuming from deep
sleep state. For this the IA55 registers are cached in suspend and restored
in resume.
The IA55 IRQ controller is connected to GPIO controller and GIC as follows:
┌──────────┐ ┌──────────┐
│ │ SPIX │ │
│ ├─────────►│ │
│ │ │ │
│ │ │ │
┌────────┐IRQ0-7 │ IA55 │ │ GIC │
Pin0 ───────►│ ├─────────────►│ │ │ │
│ │ │ │ PPIY │ │
... │ GPIO │ │ ├─────────►│ │
│ │GPIOINT0-127 │ │ │ │
PinN ───────►│ ├─────────────►│ │ │ │
└────────┘ └──────────┘ └──────────┘
where:
- Pin0 is the first GPIO controller pin
- PinN is the last GPIO controller pin
- SPIX is the SPI interrupt with identifier X
- PPIY is the PPI interrupt with identifier Y
Implement suspend/resume functionality with syscore_ops to be able to
cache/restore the registers after/before the GPIO controller suspend/resume
functions are invoked.
As the syscore_ops suspend/resume functions do not take any argument make
the driver private data static so it can be accessed from the
suspend/resume functions.
The IA55 interrupt controller is resumed before the GPIO controller. As
GPIO pins could be in an a state which causes spurious interrupts, the
reconfiguration of the interrupt controller is restricted to restore the
interrupt type and leave them disabled.
An eventually required interrupt enable operation will be done as part of
the GPIO controller resume function after restoring the GPIO state.
[ tglx: Massaged changelog ]
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-8-claudiu.beznea.uj@bp.renesas.com
|
|
register's index
There are 2 TITSR registers available on the IA55 interrupt controller.
Add a macro that retrieves the TITSR register offset based on it's
index. This macro is useful in when adding suspend/resume support so both
TITSR registers can be accessed in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com
|
|
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When "Low-level detection" is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com
|
|
Document structure members to follow the requirements specified in
maintainer-tip, section 4.3.7. Struct declarations and initializers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-5-claudiu.beznea.uj@bp.renesas.com
|
|
Align struct member names to tabs to follow the requirements from
maintainer-tip file. 3 tabs were used at the moment as the next commits
will add a new member which requires 3 tabs for a better view.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-4-claudiu.beznea.uj@bp.renesas.com
|
|
Use tabs instead of spaces in definition of TINT_EXTRACT_HWIRQ()
and TINT_EXTRACT_GPIOINT() macros to align with coding style
requirements described in Documentation/process/coding-style.rst,
"Indentation" chapter.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-3-claudiu.beznea.uj@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Exclude managed interrupts in the calculation of interrupts which
are targeted to a CPU which is about to be offlined to ensure that
there are enough free vectors on the still online CPUs to migrate
them over.
Managed interrupts do not need to be accounted because they are
either shut down on offline or migrated to an already reserved and
guaranteed slot on a still online CPU in the interrupts affinity
mask.
Including managed interrupts is overaccounting and can result in
needlessly aborting hibernation on large server machines.
- The usual set of small improvements
Drivers:
- Make the generic interrupt chip implementation handle interrupt
domains correctly and initialize the name pointers correctly
- Add interrupt affinity setting support to the Renesas RZG2L chip
driver.
- Prevent registering syscore operations multiple times in the SiFive
PLIC chip driver.
- Update device tree handling in the NXP Layerscape MSI chip driver"
* tag 'irq-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Fix syscore registration for multi-socket systems
irqchip/ls-scfg-msi: Use device_get_match_data()
genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
genirq/matrix: Exclude managed interrupts in irq_matrix_allocated()
PCI/MSI: Provide stubs for IMS functions
irqchip/renesas-rzg2l: Enhance driver to support interrupt affinity setting
genirq/generic-chip: Fix the irq_chip name for /proc/interrupts
irqdomain: Annotate struct irq_domain with __counted_by
|
|
Add support to set the affinity of the IRQC interrupt by implementing
the irq_set_affinity callback via the parent interrupt chip.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231011195324.66807-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Use the existing irq_data_get_irq_chip_data() helper instead of
open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/8e47cc6400e5a82c854c855948d2665a3a3197e3.1695819391.git.geert+renesas@glider.be
|
|
The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Add a driver for the Renesas RZ/G2L Interrupt Controller.
This supports external pins being used as interrupts. It supports
one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
to be used as IRQ lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com
|
