summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlxsw/minimal.c
AgeCommit message (Collapse)Author
2024-06-28mlxsw: Implement ethtool operation to write to a transceiver module EEPROMIdo Schimmel
Implement the ethtool_ops::set_module_eeprom_by_page operation to allow ethtool to write to a transceiver module EEPROM, in a similar fashion to the ethtool_ops::get_module_eeprom_by_page operation. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-26net: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For mlxsw Reviewed-by: Kory Maincent <Kory.maincent@bootlin.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> # for mctp-i2c Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_listHeiner Kallweit
Class-based I2C probing requires detect() and address_list to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if this precondition isn't met. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/77b5ab8e-20f2-4310-bd89-57db99e2f53b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-29mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_initZhengchao Shao
The line cards array is not freed in the error path of mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by freeing the array in the error path, thereby making the error path identical to mlxsw_m_linecards_fini(). Fixes: 01328e23a476 ("mlxsw: minimal: Extend module to port mapping with slot index") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230630012647.1078002-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: remove unused ndo_get_devlink_portJiri Pirko
Remove ndo_get_devlink_port which is no longer used alongside with the implementations in drivers. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_portJiri Pirko
Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30mlxsw: minimal: Return -ENOMEM on allocation failureDan Carpenter
These error paths return success but they should return -ENOMEM. Fixes: 01328e23a476 ("mlxsw: minimal: Extend module to port mapping with slot index") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/YwjgwoJ3M7Kdq9VK@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23mlxsw: minimal: Extend to support line card dynamic operationsVadim Pasternak
Implement line card operation callbacks got_active() / got_inactive(). The purpose of these callback to create / remove line card ports after line card is getting active / inactive. Implement line ports_remove_selected() callback to support line card un-provisioning flow through 'devlink'. Add line card operation registration and de-registration APIs. Add module offset for line card. Offset for main board iz zero. For line card in slot #n offset is calculated as (#n - 1) multiplied by maximum modules number. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23mlxsw: minimal: Extend module to port mapping with slot indexVadim Pasternak
The interfaces for ports found on line card are created and removed dynamically after line card is getting active or inactive. Introduce per line card array with module to port mapping. For each port get 'slot_index' through PMLP register and set port mapping for the relevant [slot_index][module] entry. Split module and port allocation into separate routines. Split per line card port creation and removing into separate routines. Motivation to re-use these routines for line card operations. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23mlxsw: minimal: Move ports allocation to separate routineVadim Pasternak
Perform ports allocation in a separate routine. Motivation is to re-use this routine for ports found on line cards. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23mlxsw: minimal: Extend APIs with slot index for modular system supportVadim Pasternak
Add 'slot_index' field to port structure. Replace zero slot_index argument with 'slot_index' in 'ethtool' related APIs. Add 'slot_index' argument to port initialization and de-initialization related APIs. Motivation is to prepare minimal driver for modular system support. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11mlxsw: minimal: Fix deadlock in ports creationVadim Pasternak
Drop devl_lock() / devl_unlock() from ports creation and removal flows since the devlink instance lock is now taken by mlxsw_core. Fixes: 72a4c8c94efa ("mlxsw: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14mlxsw: Revert "Introduce initial XM router support"Petr Machata
This reverts commit 75c2a8fe8e39 ("Merge branch 'mlxsw-introduce-initial-xm-router-support'"). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-18mlxsw: spectrum: Add port to linecard mappingJiri Pirko
For each port get slot_index using PMLP register. For ports residing on a linecard, identify it with the linecard by setting mapping using devlink_port_linecard_set() helper. Use linecard slot index for PMTDB register queries. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18mlxsw: Narrow the critical section of devl_lock during ports creation/removalJiri Pirko
No need to hold the lock for alloc and freecpu. So narrow the critical section. Follow-up patch is going to benefit from this by adding more code to the functions which will be out of the critical as well. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15mlxsw: core: Extend interfaces for cable info access with slot argumentVadim Pasternak
Extend all cable info APIs with 'slot_index' argument. For main board, slot will always be set to zero and these APIs will work as before. If reading cable information is required from cages located on line cards, slot should be set to the physical slot number, where line card is located in modular systems. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16eth: mlxsw: switch to explicit locking for port registrationJakub Kicinski
Explicitly lock the devlink instance and use devl_ API. This will be used by the subsequent patch to invoke .port_split / .port_unsplit callbacks with devlink instance lock held. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23mlxsw: Remove resource query checkIdo Schimmel
Since SwitchX-2 support was removed in commit b0d80c013b04 ("mlxsw: Remove Mellanox SwitchX-2 ASIC support"), all the ASICs supported by mlxsw support the resource query command. Therefore, remove the resource query check and always query resources from the device. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26mlxsw: Add netdev argument to mlxsw_env_get_module_info()Danielle Ratson
The next patches will forbid querying the port module's EEPROM info when its type is RJ45 as in this case no transceiver module can ever be connected to the port. Add netdev argument to mlxsw_env_get_module_info() so it could be used to print an error to the kernel log via netdev_err(). Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01mlxsw: Use u16 for local_port field instead of u8Amit Cohen
Currently, local_port field is saved as u8, which means that maximum 256 ports can be used. As preparation for Spectrum-4, which will support more than 256 ports, local_port field should be extended. Save local_port as u16 to allow use of additional ports. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19ethernet: mlxsw: use eth_hw_addr_gen()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06mlxsw: Add ability to control transceiver modules' power modeIdo Schimmel
Implement support for ethtool_ops::.get_module_power_mode and ethtool_ops::set_module_power_mode. The get operation is implemented using the Management Cable IO and Notifications (MCION) register that reports the operational power mode of the module and its presence. In case a module is not present, its operational power mode is not reported to ethtool and user space. If not set before, the power mode policy is reported as "high", which is the default on Mellanox systems. The set operation is implemented using the Port Module Memory Map Properties (PMMP) register. The register instructs the device's firmware to transition a plugged-in module to / out of low power mode by writing to its memory map. When the power mode policy is set to 'auto', a module will not transition to low power mode as long as any ports using it are administratively up. Example: # devlink port split swp11 count 4 # ethtool --set-module swp11s0 power-mode-policy auto $ ethtool --show-module swp11s0 Module parameters for swp11s0: power-mode-policy auto power-mode low # ip link set dev swp11s0 up # ip link set dev swp11s1 up $ ethtool --show-module swp11s0 Module parameters for swp11s0: power-mode-policy auto power-mode high # ip link set dev swp11s1 down $ ethtool --show-module swp11s0 Module parameters for swp11s0: power-mode-policy auto power-mode high # ip link set dev swp11s0 down $ ethtool --show-module swp11s0 Module parameters for swp11s0: power-mode-policy auto power-mode low Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15mlxsw: Add support for transceiver modules resetIdo Schimmel
Implement support for ethtool_ops::reset in order to reset transceiver modules. The module backing the netdev is reset when the 'ETH_RESET_PHY' flag is set. After a successful reset, the flag is cleared by the driver and other flags are ignored. This is in accordance with the interface documentation: "The reset() operation must clear the flags for the components which were actually reset. On successful return, the flags indicate the components which were not reset, either because they do not exist in the hardware or because they cannot be reset independently. The driver must never reset any components that were not requested." Reset is useful in order to allow a module to transition out of a fault state. From section 6.3.2.12 in CMIS 5.0: "Except for a power cycle, the only exit path from the ModuleFault state is to perform a module reset by taking an action that causes the ResetS transition signal to become TRUE (see Table 6-11)". An error is returned when the netdev is administratively up: # ip link set dev swp11 up # ethtool --reset swp11 phy ETHTOOL_RESET 0x40 Cannot issue ETHTOOL_RESET: Invalid argument # ip link set dev swp11 down # ethtool --reset swp11 phy ETHTOOL_RESET 0x40 Components reset: 0x40 An error is returned when the module is shared by multiple ports (split ports) and the "phy-shared" flag is not set: # devlink port split swp11 count 4 # ethtool --reset swp11s0 phy ETHTOOL_RESET 0x40 Cannot issue ETHTOOL_RESET: Invalid argument # ethtool --reset swp11s0 phy-shared ETHTOOL_RESET 0x400000 Components reset: 0x400000 # devlink port unsplit swp11s0 # ethtool --reset swp11 phy ETHTOOL_RESET 0x40 Components reset: 0x40 An error is also returned when one of the ports using the module is administratively up: # devlink port split swp11 count 4 # ip link set dev swp11s1 up # ethtool --reset swp11s0 phy-shared ETHTOOL_RESET 0x400000 Cannot issue ETHTOOL_RESET: Invalid argument # ip link set dev swp11s1 down # ethtool --reset swp11s0 phy-shared ETHTOOL_RESET 0x400000 Components reset: 0x400000 Reset is performed by writing to the "rst" bit of the PMAOS register, which instructs the firmware to assert the reset signal connected to the module for a fixed amount of time. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15mlxsw: Track per-module port statusIdo Schimmel
In the common port module core, track the number of logical ports that are mapped to the port module and the number of logical ports using it that are administratively up. This will be used by later patches to potentially veto and control certain operations on the module, such as reset and setting its power mode. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21mlxsw: core: Add support for module EEPROM read by pageIdo Schimmel
Add support for ethtool_ops::get_module_eeprom_by_page() which allows user space to read transceiver module EEPROM based on passed parameters. The I2C address is not validated in order to avoid module-specific code. In case of wrong address, error will be returned from device's firmware. Tested by comparing output with legacy method (ioctl) output. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17mlxsw: Verify the accessed index doesn't exceed the array lengthDanielle Ratson
There are few cases in which an array index queried from a fw register, is accessed without any validation that it doesn't exceed the array length. Add a proper length validation, so accessing memory past the end of an array will be forbidden. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-14mlxsw: Ignore ports that are connected to eXtended mezanineJiri Pirko
Use the info stored in the bus_info struct about the eXtended mezanine connected ports and don't expose them. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-09mlxsw: Set port split ability attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the split ability of the port as well, based on port_mapping->width field and split attribute of devlink port in spectrum, so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set number of port lanes attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the number of lanes of the port as well so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'Christophe JAILLET
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: minimal: Add validation for FW versionVadim Pasternak
Add validation for FW version in order to prevent driver initialization in case FW version is older than expected. FW version validation is necessary, because use of a new field 'num_of_modules' in MGPIR register is not backward compatible. FW 'minor' and 'subminor' versions are expected to be greater than or equal to 2000 and 1886, respectively. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30mlxsw: i2c: Extend initialization with querying firmware infoVadim Pasternak
Extend initialization flow with query request for firmware info in order to obtain firmware version info. This info is to be provided to minimal driver to support ethtool get_drvinfo() interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04mlxsw: Remove ndo_get_port_parent_id implementationJiri Pirko
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04mlxsw: Pass switch ID through devlink_port_attrs_set()Jiri Pirko
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Remove ndo_get_phys_port_name implementationJiri Pirko
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Implement ndo_get_devlink_portJiri Pirko
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24mlxsw: Move devlink_port_attrs_set() call before registerJiri Pirko
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12mlxsw: minimal: Initialize base_macJiri Pirko
Currently base_mac is not initialized which causes wrong reporting of zeroed parent_id to userspace. Fix this by initializing base_mac properly. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend initialization by querying resources dataVadim Pasternak
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Add ethtool supportVadim Pasternak
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: minimal: Make structures and variables names shorterVadim Pasternak
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: minimal: Add I2C support for Mellanox ASICsVadim Pasternak
Add I2C access support for Mellanox ASICs: - Virtual Protocol Interconnect switches SwitchX, SwitchX2, providing InfiniBand, Ethernet and Fibre Channel connectivity; - Infiniband switches SwitchIB, SwitchIB2: - Ethernet switch Spectrum. Example of probing activation: echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 11:23:59 +0000