| Age | Commit message (Collapse) | Author |
|---|
|
After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 52358dd63e34 ("net: phy: remove function stubs") there's a
problem if CONFIG_MDIO_BUS is set, but CONFIG_PHYLIB is not.
mdiobus_scan() uses phylib functions like get_phy_device().
Bringing back the stub wouldn't make much sense, because it would
allow to compile mdiobus_scan(), but the function would be unusable.
The stub returned NULL, and we have the following in mdiobus_scan():
phydev = get_phy_device(bus, addr, c45);
if (IS_ERR(phydev))
return phydev;
So calling mdiobus_scan() w/o CONFIG_PHYLIB would cause a crash later in
mdiobus_scan(). In general the PHYLIB functionality isn't optional here.
Consequently, MDIO bus providers depend on PHYLIB.
Therefore factor it out and build it together with the libphy core
modules. In addition make all MDIO bus providers under /drivers/net/mdio
depend on PHYLIB. Same applies to enetc MDIO bus provider. Note that
PHYLIB selects MDIO_DEVRES, therefore we can omit this here.
Fixes: 52358dd63e34 ("net: phy: remove function stubs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504270639.mT0lh2o1-lkp@intel.com/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c74772a9-dab6-44bf-a657-389df89d85c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The newly added rtl9300 driver needs MDIO_DEVRES:
x86_64-linux-ld: drivers/net/mdio/mdio-realtek-rtl9300.o: in function `rtl9300_mdiobus_probe':
mdio-realtek-rtl9300.c:(.text+0x941): undefined reference to `devm_mdiobus_alloc_size'
x86_64-linux-ld: mdio-realtek-rtl9300.c:(.text+0x9e2): undefined reference to `__devm_mdiobus_register'
Since this is a hidden symbol, it needs to be selected by each user,
rather than the usual 'depends on'. I see that there are a few other
drivers that accidentally use 'depends on', so fix these as well for
consistency and to avoid dependency loops.
Fixes: 37f9b2a6c086 ("net: ethernet: Add missing depends on MDIO_DEVRES")
Fixes: 24e31e474769 ("net: mdio: Add RTL9300 MDIO driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20250425112819.1645342-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of these functions depend on PHYLIB or select it directly
or indirectly by selecting PHYLINK. Stubs make sense for optional
functionality, but that's not the case here.
MDIO_XGENE usually is selected by NET_XGENE which also selects PHYLIB.
Add a dependency to PHYLIB nevertheless, in order not to break
randconfig builds.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/f7a69a1f-60e9-4ac0-8b7c-481e0cc850e7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a driver for the MDIO controller on the RTL9300 family of Ethernet
switches with integrated SoC. There are 4 physical SMI interfaces on the
RTL9300 however access is done using the switch ports. The driver takes
the MDIO bus hierarchy from the DTS and uses this to configure the
switch ports so they are associated with the correct PHY. This mapping
is also used when dealing with software requests from phylib.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409231554.3943115-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There exists several examples today of devices that embed an ethernet
PHY or PCS directly inside an SoC. In this situation, either the device
is controlled through a vendor-specific register set, or sometimes
exposes the standard 802.3 registers that are typically accessed over
MDIO.
As phylib and phylink are designed to use mdiodevices, this driver
allows creating a virtual MDIO bus, that translates mdiodev register
accesses to regmap accesses.
The reason we use regmap is because there are at least 3 such devices
known today, 2 of them are Altera TSE PCS's, memory-mapped, exposed
with a 4-byte stride in stmmac's dwmac-socfpga variant, and a 2-byte
stride in altera-tse. The other one (nxp,sja1110-base-tx-mdio) is
exposed over SPI.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A number of MDIO drivers make use of devm_mdiobus_alloc_size(). This
is only available when CONFIG_MDIO_DEVRES is enabled. Add missing
depends or selects, depending on if there are circular dependencies or
not. This avoids linker errors, especially for randconfig builds.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230409150204.2346231-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the mdio mux and internal phy glue of the GXL SoC
family
Reported-by: Da Xue <da@lessconfused.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's build error while CONFIG_REGMAP_MMIO is not set
and CONFIG_MDIO_MSCC_MIIM=m.
ERROR: modpost: "__devm_regmap_init_mmio_clk"
[drivers/net/mdio/mdio-mscc-miim.ko] undefined!
Add the depend of REGMAP_MMIO to fix it.
Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130110209.804536-1-dtcccc@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.
Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based on this create a PHY device instance which is
registered on the mdiobus.
Along with fwnode_mdiobus_register_phy() also introduce
fwnode_find_mii_timestamper() and fwnode_mdiobus_phy_device_register()
since they are needed.
While at it, also use the newly introduced fwnode operation in
of_mdiobus_phy_device_register().
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Better place for of_mdio.c is drivers/net/mdio.
Move of_mdio.c from drivers/of to drivers/net/mdio
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver makes use of devm_mdiobus_alloc_size. To ensure this is
available select MDIO_DEVRES which provides it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.
Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.
v2:
Fix typo in commit message
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
