summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/dvm
AgeCommit message (Collapse)Author
2025-05-10wifi: iwlwifi: rename iwl_cfg to iwl_rf_cfgJohannes Berg
With all the cleanups now, we can rename the structure to better indicate the functionality. For older devices this isn't quite accurate, of course, but it's better to have a name that reflects future use for maintenance. Add some kernel-doc while at it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename struct iwl_base_paramsJohannes Berg
These are (going to be) base MAC parameters that are identical even for different platforms with the same MAC, so rename the structure accordingly, calling it iwl_family_base_params. Also rename the pointer to it so the dereferencing is a bit shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename cfg_trans_params to mac_cfgJohannes Berg
Since 9000 series devices, the devices are split into MAC and CRF parts. Currently, "struct iwl_cfg" reflects some MAC and some RF parameters, but we want to clean this up and move the MAC data to what's now "struct iwl_cfg_trans_params". As the first step, to reflect the intent, rename this structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: inline HT paramsJohannes Berg
With just a handful of values in two bytes, the params are smaller than the pointer to them. Inline them and save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: dvm: init 'keep_alive_beacons' in power tablesJohannes Berg
These should be zero, but we might as well be explicit about it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250505215513.1e943bf696f4.Id2d7a413dc594c4525ac7ad0650ec8a50e1970ca@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: dvm: pair transport op-mode enter/leaveJohannes Berg
If there's a failure and the op-mode didn't actually fully initialize, it should leave the transport again. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.714c3517548b.I49557e7ba8c03be2b558cc9fb5efa2a9fbab890e@changeid
2025-05-07wifi: iwlwifi: rework transport configurationJohannes Berg
Instead of having a trans_configure method that copies all the data, just have the users set up the configuration in the transport directly. This simplifies the code on both sides. While doing so also move some value from the trans struct into the conf struct because they are configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.e2a2535ecfd0.I21653103ff02afc5a4d97a41b68021f053985e37@changeid
2025-05-07wifi: iwlwifi: trans: collect device informationJohannes Berg
Add a new device information 'info' substruct to the transport that's const and can only be set by a special helper, and move some information there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.cd80cb55403c.Ic18524b66d655fad734bf97192a54d9cfa9fdf1f@changeid
2025-05-07wifi: iwlwifi: trans: remove SCD base address validationJohannes Berg
We pass this parameter around a lot of places just to validate what the firmware told us against the hardware with a warning, which seems to never trigger. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224232.5405014d7f88.I3b74a1fd51a39c6df5674f2994189092d1635e7f@changeid
2025-05-07wifi: iwlwifi: pass full FW info to transportJohannes Berg
The code currently passes only the specific image that should be loaded, but then has to pass the IML (image loader) out of band, which is confusing. Pass the full FW data together with desired image type, and use the IML from that. This also cleans up the code in the various sub-drivers a bit as they no longer have to look up and check for the image. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250503224231.eac4006e81c5.Iebadc56bb2762e5f4d71f66bb2609d74b33daf11@changeid
2025-05-06wifi: iwlwifi: dvm: fix various W=1 warningsJohannes Berg
Fix warnings occurring with W=1, mostly const and one about pointer arithmetic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.3ef1e4f1cccb.Ic41d3f3721e8bd9df9cd50242232110c4a93e873@changeid
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-18wifi: iwlwifi: dvm: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `__struct_group()` helper to create a new tagged `struct iwl_tx_cmd_hdr`. This structure groups together all the members of the flexible `struct iwl_tx_cmd` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct iwl_tx_cmd` to `struct iwl_tx_cmd_hdr`. We also want to ensure that when new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct iwl_tx_cmd_hdr` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. So, with these changes, fix the following warnings: drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2315:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/dvm/commands.h:2426:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/Zr5QR03+wyw571zd@elsanto Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: dvm: Remove unused iwl_rx_ant_restrictionDr. David Alan Gilbert
iwl_rx_ant_restriction() was added in 2009 by commit 46f9381aa3fb ("iwlwifi: Thermal Throttling Management - part 2") but never used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241223013202.340180-2-linux@treblig.org
2025-01-13wifi: iwlwifi: rename bits in config/boot control registerJohannes Berg
The register 0x000 is now really boot control, and some of the old bit names were (even for old hardware) not reflecting the names on the hardware side; rename them in the driver to align the naming. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241228223206.6f25be160619.I3ffc9601e99dc414a9ae54a0d90c9d20c0253da5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: rework firmware error handlingJohannes Berg
In order to later add the ability to do deeper resets of the device when it crashes, first restructure the firmware error handling. Instead of having just a single nic_error() method that handles all, split it: - nic_error() just handles and prints the error itself, - dump_error() synchronously creates an error dump, and - sw_reset() will be called to request doing a SW reset. This changes the architecture so that the transport is now responsible for deciding how to do the reset, and therefore the handling of reprobe if error occurs during reconfig moves there, which necessitates adding a method there that notifies the transport that the recovery was completed. Actually introducing the model under which deeper resets can be done will be in future patches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241227095718.6d4f741ae907.I96a9243e7877808ed6d1bff6967c15d6c24882f0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: unify cmd_queue_full() into nic_error()Johannes Berg
Except for some special handling in DVM, error dump and some message behaviour, cmd_queue_full and nic_error are equivalent now. Unify by giving a special error type, so DVM can continue to differentiate. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241227095718.0222183504aa.Ie29cef75fbd91b64a43619bc36bd5b29c5b9f957@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: return ERR_PTR from opmode start()Johannes Berg
In order to restrict the retry loops for timeouts, first pass the error code up using ERR_PTR(). This of course requires all existing functions to be updated accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241227095718.3fe5031d5784.I7307996c91dac69619ff9c616b8a077423fac19f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: differentiate NIC error typesJohannes Berg
Instead of differentiating only sync/async, differentiate the type of error, and document that only reset handshake timeout (IWL_ERR_TYPE_RESET_HS_TIMEOUT) needs sync handling. The special sync handling is somewhat temporary, the idea is to later split the nic_error() method into error dump, synchronizing the dump, and SW reset methods, and the type is mostly in order to unify command queue full handling into that new architecture as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241227095718.aed9c9e4fac0.I2288042bec4728a75b61cb7f6ded5214bfa3ce85@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-08-27wifi: iwlwifi: use default command queue watchdog timeoutMiri Korenblit
We used to have the opmode configuring it to the trans according to the debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS). But this debug is not used, so trans can just have the default value hardcoded. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: dvm: fix kernel-doc warningsJohannes Berg
Mostly the docs just aren't kernel-doc anyway, and one is a typo. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.8b12f56bf8c0.I64fa9df72ca0e862b96647c062b8c9464318e649@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: remove struct iwl_trans_opsYedidya Benshimol
This was needed when we had multiple types of transports. Now we only have pcie, so there is no need for this ops. Cleanup the code such as the different trans APIs will call the pcie function directly, instead of calling the callback, and remove struct iwl_trans_ops. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23wifi: iwlwifi: move code from iwl-eeprom-parse to dvmEmmanuel Grumbach
Move code that is DVM only to dvm. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.9a1b6ef116e0.I217a513f544d5288a7760d265f51419e81abfd9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: kill iwl-eeprom-readEmmanuel Grumbach
This is used by dvm only, move to dvm. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.72f4bf256c8d.I7433bda9b0fc9eece5210db2cb90c2f03973f5ec@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: dvm: clean up rs_get_rate() logicJohannes Berg
The logic here is rather convoluted - we cannot get here with lq_sta being NULL as mac80211 will (no longer) call us like that, and since I removed the rate_control_send_low() call in this function there's no longer any point in setting priv_sta to NULL either. So the only thing that remains to check is if we have actually initialized our lq_sta->drv pointer, and exit if we didn't in which case we'll use the data mac80211 already set up for the low rate usage. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Link: https://msgid.link/20240510170500.a4cdb41825eb.Id202bcc967c32829f70ab1412f8893b6eb7f78e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: empty overflow queue during flushMiri Korenblit
If a TX queue has no space for new TX frames, the driver will keep these frames in the overflow queue, and during reclaim flow it will retry to send the frames from that queue. But if the reclaim flow was invoked from TX queue flush, we will also TX these frames, which is wrong as we don't want to TX anything after flush. This might also cause assert 0x125F when removing the queue, saying that the driver removes a non-empty queue Fix this by TXing the overflow queue's frames only if we are not in flush queue flow. Fixes: a44509805895 ("iwlwifi: move reclaim flows to the queue file") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: fw: increase fw_version string sizeGregory Greenman
In reality 64 bytes are enough to hold fw version string, but some compilers can complain (with W=1) that output may be truncated when building this string with snprintf. Increase the size to avoid this sort of warnings and state explicitely that we want the size to be trancated to 32 bytes. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Tested-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231012153950.f4465b4b4e2b.Idced2e8d63c492872edcde1a3ce2cdd6cc0f8eb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: dvm: remove kernel-doc warningsJohannes Berg
Mostly remove kernel-doc comment annotation since the comments really aren't kernel-doc, and fix a few other places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230830112059.7178fb7c96fb.I6af1f291e306c50a3c4f5afcdc2ba0bbd4bea01f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: add support for mld in ieee80211_chswitch_doneEmmanuel Grumbach
This allows to finalize the CSA per link. In case the switch didn't work, tear down the MLD connection. Also pass the ieee80211_bss_conf to post_channel_switch to let the driver know which link completed the switch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: dvm: fix -Wunused-const-variable gcc warningDmitry Antipov
Fix the following gcc 13.1 warning observed with W=1: drivers/net/wireless/intel/iwlwifi/dvm/rs.c:207:39: warning: ‘iwl_rate_mcs’ defined but not used [-Wunused-const-variable=] This table is actually used in 'rs_sta_dbgfs_scale_table_read()' only if CONFIG_MAC80211_DEBUGFS is enabled, so the whole thing may be moved close to its actual use. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://lore.kernel.org/r/20230619103900.300628-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: add a few rate index validity checksAnjaneyulu
Validate index before access iwl_rate_mcs to keep rate->index inside the valid boundaries. Use MCS_0_INDEX if index is less than MCS_0_INDEX and MCS_9_INDEX if index is greater then MCS_9_INDEX. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-19wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtraceHans de Goede
A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Call Trace: <TASK> iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] <snip> Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/ Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/ Cc: Kees Cook <keescook@chromium.org> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-28wifi: iwlwifi: Track scan_cmd allocation size explicitlyKees Cook
In preparation for reducing the use of ksize(), explicitly track the size of scan_cmd allocations. This also allows for noticing if the scan size changes unexpectedly. Note that using ksize() was already incorrect here, in the sense that ksize() would not match the actual allocation size, which would trigger future run-time allocation bounds checking. (In other words, memset() may know how large scan_cmd was allocated for, but ksize() will return the upper bounds of the actually allocated memory, causing a run-time warning about an overflow.) Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Miri Korenblit <miriam.rachel.korenblit@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220923220853.3302056-1-keescook@chromium.org
2022-09-07wifi: iwlwifi: calib: Refactor iwl_calib_result usage for clarityKees Cook
In preparation for FORTIFY_SOURCE performing run-time destination buffer bounds checking for memcpy(), refactor the use of struct iwl_calib_result: - Have struct iwl_calib_result contain struct iwl_calib_cmd since functions expect to operate on the "data" flex array in "cmd", which follows the "hdr" member. - Switch argument passing around to use struct iwl_calib_cmd instead of struct iwl_calib_hdr to prepare functions to see the "data" member. - Change iwl_calib_set()'s "len" argument to a size_t since it is always unsigned and is normally receiving the output of sizeof(). - Add an explicit length sanity check in iwl_calib_set(). - Adjust the memcpy() to avoid copying across the now visible composite flex array structure. This avoids the future run-time warning: memcpy: detected field-spanning write (size 8) of single field "&res->hdr" (size 4) Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Reported-by: Andy Lavr <andy.lavr@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220901204558.2256458-1-keescook@chromium.org
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make some SMPS code MLD-awareJohannes Berg
Start making some SMPS related code MLD-aware. This isn't really done yet, but again cuts down our 'deflink' reliance. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: Fix -EIO error code that is never returnedColin Ian King
Currently the error -EIO is being assinged to variable ret when the READY_BIT is not set but the function iwlagn_mac_start returns 0 rather than ret. Fix this by returning ret instead of 0. Addresses-Coverity: ("Unused value") Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-06-02 01:36:18 +0000