summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7921/init.c
AgeCommit message (Collapse)Author
2025-01-14wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domainLeon Yen
Some countries have strict RF restrictions where changing the regulatory domain dynamically based on the connected AP is not acceptable. This patch disables Beacon country IE hinting when a valid country code is set from usersland (e.g., by system using iw or CRDA). Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Link: https://patch.msgid.link/20240412085357.13756-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: introduce mt792x_config_mac_addr_list routineAllan Wang
Add mt792x_config_mac_addr_list routine in order to set the mac address list supported by the driver. Initialize wiphy->addresses/n_addresses for mt792x driver Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Signed-off-by: Leon Yen <Leon.Yen@mediatek.com> Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20241016101017.19598-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7921: Check devm_kasprintf() returned valueMa Ke
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: stable@vger.kernel.org Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7921: fix wrong UNII-4 freq range check for the channel usageMing Yen Hsieh
The check should start from 5845 to 5925, which includes channels 169, 173, and 177. Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240806013408.17874-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: mt7921: fix the unfinished command of regd_notifier before suspendMing Yen Hsieh
Before entering suspend, we need to ensure that all MCU command are completed. In some cases, such as with regd_notifier, there is a chance that CLC commands, will be executed before suspend. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-11wifi: mt76: mt7921: fix CLC command timeout when suspend/resumeMing Yen Hsieh
When enter suspend/resume while in a connected state, the upper layer will trigger disconnection before entering suspend, and at the same time, it will trigger regd_notifier() and update CLC, causing the CLC event to not be received due to suspend, resulting in a command timeout. Therefore, the update of CLC is postponed until resume, to ensure data consistency and avoid the occurrence of command timeout. Fixes: 4fc8df50fd41 ("wifi: mt76: mt7921: get regulatory information from the clc event") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-10-23wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel infoMing Yen Hsieh
When the chip not support 6GHz capability, the channels of 6GHz information should not be updated. This caused a crash: [ 19.442078] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 [ 19.457535] Mem abort info: [ 19.465329] ESR = 0x0000000096000004 [ 19.473295] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.482354] SET = 0, FnV = 0 [ 19.489143] EA = 0, S1PTW = 0 [ 19.495991] FSC = 0x04: level 0 translation fault [ 19.504554] Data abort info: [ 19.511111] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 19.520269] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 19.528988] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 19.537960] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001027a9000 [ 19.548014] [0000000000000014] pgd=0000000000000000, p4d=000000000000 [ 19.558429] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.568270] Modules linked in: mt7921e mt7921_common mt792x_lib mt76_connac_lib mt76 mac80211 btusb btintel cfg80211 btmtk snd_sof_ipc_msg_ btrtl snd_sof_ipc_flood_test btbcm bluetooth snd_sof_mt8195 uvcvideo mtk_adsp_common snd_sof_xtensa_dsp uvc snd_sof_of snd_sof videobuf2_vmalloc ecdh_generic ecc snd_sof_utils cros_ec_lid_angle cros_ec_sensors crct10dif_ cros_ec_sensors_core cros_usbpd_logger crypto_user fuse ip_tables ipv6 [ 19.614237] CPU: 1 PID: 105 Comm: kworker/1:1 Not tainted 6.6.0-rc6-next-20231017+ #324 [ 19.625957] Hardware name: Acer Tomato (rev2) board (DT) [ 19.634970] Workqueue: events mt7921_init_work [mt7921_common] [ 19.644522] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTY [ 19.655182] pc : mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.664983] lr : mt7921_regd_notifier+0xd4/0x290 [mt7921_common] [ 19.674679] sp : ffff800080acba80 [ 19.681649] x29: ffff800080acba80 x28: 0000000000000000 x27: ffff4faf [ 19.692483] x26: 0000000000000000 x25: 0000000000000000 x24: ffff4faf [ 19.703294] x23: 00000000ffffe926 x22: ffff4faf16031fa0 x21: 00000000 [ 19.714108] x20: 000000000000001c x19: ffff4faf16ba6f40 x18: 00000000 [ 19.724928] x17: 0000000000000000 x16: ffffac6b891c2750 x15: ffff8000 [ 19.735722] x14: 0000000000000180 x13: 0000000000000000 x12: 00000000 [ 19.746478] x11: 0000000000000002 x10: ffff4faf01c21780 x9 : ffffac6b [ 19.757214] x8 : 00000000006c0000 x7 : ffffac6b6b020cf0 x6 : ffffac6b [ 19.767945] x5 : ffffac6b6b020d00 x4 : ffffac6b6b020cf8 x3 : ffff4faf [ 19.778648] x2 : 0000000000000000 x1 : 000000000000001c x0 : 00000000 [ 19.789366] Call trace: [ 19.795381] mt7921_regd_notifier+0x180/0x290 [mt7921_common] [ 19.804675] wiphy_update_regulatory+0x2bc/0xa08 [cfg80211] [ 19.813864] wiphy_regulatory_register+0x4c/0x88 [cfg80211] [ 19.823029] wiphy_register+0x75c/0x8d0 [cfg80211] [ 19.831446] ieee80211_register_hw+0x70c/0xc10 [mac80211] [ 19.840479] mt76_register_device+0x168/0x2e8 [mt76] [ 19.849008] mt7921_init_work+0xdc/0x250 [mt7921_common] [ 19.857817] process_one_work+0x148/0x3c0 [ 19.865292] worker_thread+0x32c/0x450 [ 19.872489] kthread+0x11c/0x128 [ 19.879173] ret_from_fork+0x10/0x20 [ 19.886153] Code: f0000041 9100a021 94000aef aa0003f9 (b9401780) [ 19.895634] ---[ end trace 0000000000000000 ]--- Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Closes: https://lore.kernel.org/all/927e7d50-826d-4c92-9931-3c59b18c6945@collabora.com/ Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/cf77a58a60d81c77a28388bc8d312b87ffb48434.1697603002.git.deren.wu@mediatek.com
2023-09-30wifi: mt76: mt7921: update the channel usage when the regd domain changedMing Yen Hsieh
The 5.9/6GHz channel license of a certain platform device has been regulated in various countries. That may be difference with standard Liunx regulatory domain settings. In this case, when .reg_notifier() called for regulatory change, mt792x chipset should update the channel usage based on clc or dts configurations. Channel would be disabled by following cases. * clc report the particular UNII-x is disabled. * dts enabled and the channel is not configured. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify codeJinjie Ruan
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to simplify code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt792x: move MT7921_PM_TIMEOUT and MT7921_HW_SCAN_TIMEOUT in ↵Lorenzo Bianconi
common code MT7921_PM_TIMEOUT is shared between mt7925 and mt7921 so move it in mt792x module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move acpi_sar code in mt792x-lib moduleLorenzo Bianconi
Move acpi_sar code in mt792x-lib module since it is shared between mt7921 and mt7925 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move runtime-pm pci code in mt792x-libLorenzo Bianconi
Move the following runtime-pm pci routines in mt792x-lib since they are shared between mt7921 and mt7925 chipsets: - __mt7921e_mcu_drv_pmctrl - mt7921e_mcu_drv_pmctrl - mt7921e_mcu_fw_pmctrl Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move shared runtime-pm code on mt792x-libLorenzo Bianconi
Moving hif_ops marcos in mt792x.h, we can move shared runtime-pm code between mt7925 and mt7921 in mt792x-lib module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move hif_ops macro in mt792x.hLorenzo Bianconi
Move the following hif_ops macro in mt792x.h: - mt7925_init_reset - mt7925_dev_reset - mt7925_mcu_init - __mt7925_mcu_drv_pmctrl - __mt7925_mcu_fw_pmctrl Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move init shared code in mt792x-lib moduleLorenzo Bianconi
Reduce duplicated code moving init shared code in mt792x-lib module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt792x: introduce mt792x-lib moduleLorenzo Bianconi
mt792x-lib module will contain the shared code between mt7921 and new MT79 WiFi7 chipset Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move mt792x_hw_dev in mt792x.hLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: move mt792x_mutex_{acquire/release} in mt792x.hLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: rename mt7921_dev in mt792x_devLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: rename mt7921_phy in mt792x_phyLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: rename mt7921_sta in mt792x_staLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7921: rename mt7921_vif in mt792x_vifLorenzo Bianconi
This is a preliminary patch to introduce WiFi7 chipset support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lockLorenzo Bianconi
Rely on sta_poll_list and sta_poll_lock fields in mt76_dev structure and get rid of private copies. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7921: Support temp sensorBen Greear
Allow sensors tool to read radio's temperature, example: mt7921_phy17-pci-1800 Adapter: PCI adapter temp1: +72.0°C Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7921: fix non-PSC channel scan failMing Yen Hsieh
Due to the scan command may only request legacy bands and PSC channel in 6GHz band, we are unable to scan the APs on non-PSC channel in this case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel (obtained during scan on legacy bands) in 6GHz scan request. Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: enable p2p supportSean Wang
Introduce p2p-go/p2p-client support to mt7921 driver CONNECTION_P2P_GC/GO is not supported with the current firmware so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go respectively to make it work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move shared mac definitions in mt76_connac2_mac.hLorenzo Bianconi
Move some mac shared definitions between mt7996, mt7921 and mt7915 in mt76_connac2_mac.h. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: get rid of eeprom.hLorenzo Bianconi
eeprom.h is mostly empty for mt7921, so get rid of it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routineLorenzo Bianconi
Since the fw offload capability check is shared between pci,usb and sdio devices, move it in common init code and reduce code duplication. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-31wifi: mt76: mt7921: Fix use-after-free in fw features query.Ben Greear
Stop referencing 'features' memory after release_firmware is called. Fixes this crash: RIP: 0010:mt7921_check_offload_capability+0x17d mt7921_pci_probe+0xca/0x4b0 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/51fd8f76494348aa9ecbf0abc471ebe47a983dfd.1679502607.git.lorenzo@kernel.org
2023-02-03wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistentNeil Chen
The rx filter, in mt7921 series, may be changed in fw operation. There is a racing problem if rx filter controlled by both driver and firmware at the same time. To avoid this issue, let mt7921 driver set rx filter by new command MCU_CE_CMD_SET_RX_FILTER and allow the firmware controlling it only. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Neil Chen <yn.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: add ack signal supportDeren Wu
This reports signal strength of ACK packets from the peer as measured at each interface. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability()Sean Wang
Fixed coverity issue with resource leaks at variable "fw" going out of scope leaks the storage it points to mt7921_check_offload_capability(). Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527806 ("Resource leaks") Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: fix wrong power after multiple SAR setYN Chen
We should update CLC config before SAR set to synchronize all related settings. Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: introduce chanctx supportSean Wang
The firmware can have the capability to manage the channel context scheduling on multiple roles running on the device including Station, AP and P2P GC/GO mode (will be extended based on the future patchset) to help users sharing the network with others on a single device. The firmware is able to support the channel chanctx up to 2 interface simultaneously running on the different channels. Another thing to be noted is that before the driver is going sent out the management frames, the driver has to get the privilege from the firmware to occupy the current channel context until the frame handshake is completed and then get the privilege back to the firmware. Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7921: introduce remain_on_channel supportSean Wang
Introduce remain_on_channel support. Additionally, we add mt7921_check_offload_capability to disable .remain_on_channel and .cancel_remain_on_channel and related configuration because those operations would rely on the fundamental MCU commands that will be only supported with newer firmware. Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-15wifi: mt76: mt7921: introduce Country Location Control supportMing Yen Hsieh
Country Location Control (CLC) is an additional control for country rules in firmware. We introduce this new feature to make sure mt7921 series working properly in all region. The addtional policies would be put into firmware based on differnt regions. mt76 driver should be in charge of submitting per region policy. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: YN Chen <YN.Chen@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: enable HW beacon filter in the initialization stageSean Wang
The current driver has worked with HW beacon filter and connection monitor all the way, here we move the enablement into the initialization stage like other HW features being done to get rid of others are confused why these configurations would be changed at runtime. We still leave a way to turn off these offload features in debugfs knobs but that is just for debugging purposes. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: enlarge maximum VHT MPDU length to 11454Deren Wu
Enlarge maximum MPDU length to 11454 that both mt7921/mt7922 can support. After this fixing, we can get better performance. Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: fix aggregation subframes setting to HE maxDeren Wu
mt7921/mt7922 support HE max aggregation subframes 256 for both tx/rx. Get better throughput then before. Fixes: 94bb18b03d43 ("mt76: mt7921: fix max aggregation subframes setting") Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: enable the VHT extended NSS BW featureDeren Wu
According IEEE Std 802.11-2020, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. Some APs, such as Xiaomi AX6000, would check this one for BW settings. mt76 driver can get max BW capability only if the this field is confgured properly. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: introduce ACPI SAR config in tx powerDeren Wu
Add new function mt7921_set_tx_sar_pwr() to update SAR power from .set_sar_specs and ACPI setting. Both settings would be merged into mt76_freq_range_power for final tx power value. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: introduce ACPI SAR supportDeren Wu
In ACPI SAR enabled device, mt7921 should read power limit in ACPI config. The limit value would be applied to regular tx power settings in mt76. Two major functionalities added: 1. Get SAR power table through ACPI. 2. Read power in Dynamic/Geo SAR table for tx power limit. Table note MTDS: Dynamic SAR table MTGS: Geo SAR table MTCL: Country List table (for 6GHz support) Reviewed-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: add ipv6 NS offload supportDeren Wu
Add ipv6 NS offload for WoWLAN state. Tested in this way: 1. Put device-A into WoW state. 2. ping6 from device-B to device-A. 3. In sniffer, see Neighbour advertisement from device-A. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7921: Add AP mode supportSean Wang
add AP mode support to mt7921 that can work for mt7921[e,s,u] with the common code. Tested-by: Deren Wu <deren.wu@mediatek.com> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_init_hw in a dedicated workLorenzo Bianconi
Firmware initialization can take a while. Move mt7921_init_hw routine in a dedicated work in order to not slow down bootstrap process. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: add mt7921u driverLorenzo Bianconi
Introduce support for MT7921U 802.11ax 2x2:2SS wireless devices. Tested-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: disable runtime pm for usbLorenzo Bianconi
Runtime-pm is not currently supported by usb driver Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-07-15 22:44:01 +0000