summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/vmd.c
AgeCommit message (Collapse)Author
2025-03-28Merge tag 'pci-v6.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...
2025-03-21PCI: vmd: Disable MSI remapping bypass under XenRoger Pau Monne
MSI remapping bypass (directly configuring MSI entries for devices on the VMD bus) won't work under Xen, as Xen is not aware of devices in such bus, and hence cannot configure the entries using the pIRQ interface in the PV case, and in the PVH case traps won't be setup for MSI entries for such devices. Until Xen is aware of devices in the VMD bus prevent the VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as any kind of Xen guest. The MSI remapping bypass is an optional feature of VMD bridges, and hence when running under Xen it will be masked and devices will be forced to redirect its interrupts from the VMD bridge. That mode of operation must always be supported by VMD bridges and works when Xen is not aware of devices behind the VMD bridge. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Message-ID: <20250219092059.90850-3-roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2025-03-18PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t typeRyo Takakura
The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [bigeasy: reword commit message] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-11-25Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) * pci/controller/vmd: PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
2024-11-06PCI: vmd: Set devices to D0 before enabling PM L1 SubstatesJian-Hong Pan
The remapped PCIe Root Port and the child device have PM L1 Substates capability, but they are disabled originally. Here is a failed example on ASUS B1400CEAE: Capabilities: [900 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+ PortCommonModeRestoreTime=32us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=101376ns L1SubCtl2: T_PwrOn=50us Enable PCI-PM L1 PM Substates for devices below VMD while they are in D0 (see PCIe r6.0, sec 5.5.4). Link: https://lore.kernel.org/r/20241001083438.10070-4-jhp@endlessos.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394 Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-11-06PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUsNirmal Patel
Add support for this VMD device which supports the bus restriction mode. The feature that turns off vector 0 for MSI-X remapping is also enabled. Link: https://lore.kernel.org/r/20241011175657.249948-1-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.ntel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-19Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Fix whitespace indentation issues (Riyan Dhiman) * pci/controller/vmd: PCI: vmd: Fix indentation issue in vmd_shutdown()
2024-09-01PCI: vmd: Fix indentation issue in vmd_shutdown()Riyan Dhiman
The code in vmd_shutdown() had an indentation issue where spaces were used instead of tabs. This commit corrects the indentation to use tabs, adhering to the Linux kernel coding style guidelines. Issue reported by the checkpatch.pl script: ERROR: code indent should use tabs where possible #1056: FILE: drivers/pci/controller/vmd.c:1056: + struct vmd_dev *vmd = pci_get_drvdata(dev);$ WARNING: please, no spaces at the start of a line #1056: FILE: drivers/pci/controller/vmd.c:1056: + struct vmd_dev *vmd = pci_get_drvdata(dev);$ ERROR: code indent should use tabs where possible #1058: FILE: drivers/pci/controller/vmd.c:1058: + vmd_remove_irq_domain(vmd);$ WARNING: please, no spaces at the start of a line #1058: FILE: drivers/pci/controller/vmd.c:1058: + vmd_remove_irq_domain(vmd);$ No functional changes are intended. Link: https://lore.kernel.org/linux-pci/20240901092602.17414-1-riyandhiman14@gmail.com Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-08-06PCI: vmd: Silence 'set affinity failed' warningMarek Vasut
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-13-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-19Merge branch 'pci/misc'Bjorn Helgaas
- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert) - Use array notation for portdrv .id_table consistently (Masahiro Yamada) - Switch to new Intel CPU model defines (Tony Luck) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson) * pci/misc: PCI: controller: Add missing MODULE_DESCRIPTION() macros PCI: Add missing MODULE_DESCRIPTION() macros PCI/PM: Switch to new Intel CPU model defines PCI: Use array for .id_table consistently ACPI: PCI: Remove unused struct 'acpi_handle_node'
2024-07-10PCI: vmd: Create domain symlink before pci_bus_add_devices()Jiwei Sun
The vmd driver creates a "domain" symlink in sysfs for each VMD bridge. Previously this symlink was created after pci_bus_add_devices() added devices below the VMD bridge and emitted udev events to announce them to userspace. This led to a race between userspace consumers of the udev events and the kernel creation of the symlink. One such consumer is mdadm, which assembles block devices into a RAID array, and for devices below a VMD bridge, mdadm depends on the "domain" symlink. If mdadm loses the race, it may be unable to assemble a RAID array, which may cause a boot failure or other issues, with complaints like this: (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device'' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.' (udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1. This symptom prevents the OS from booting successfully. After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm to detect if there is a mdraid associated with this NVMe disk, and mdadm determines if a NVMe device is connected to a particular VMD domain by checking the "domain" symlink. For example: Thread A Thread B Thread mdadm vmd_enable_domain pci_bus_add_devices __driver_probe_device ... work_on_cpu schedule_work_on : wakeup Thread B nvme_probe : wakeup scan_work to scan nvme disk and add nvme disk then wakeup udevd : udevd executes mdadm command flush_work main : wait for nvme_probe done ... __driver_probe_device find_driver_devices : probe next nvme device : 1) Detect domain symlink ... 2) Find domain symlink ... from vmd sysfs ... 3) Domain symlink not ... created yet; failed sysfs_create_link : create domain symlink Create the VMD "domain" symlink before invoking pci_bus_add_devices() to avoid this race. Suggested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com Signed-off-by: Jiwei Sun <sunjw10@lenovo.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
2024-07-08PCI: controller: Add missing MODULE_DESCRIPTION() macrosJeff Johnson
When ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/dwc/pci-exynos.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pci-host-generic.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera-msi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek-gen3.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/vmd.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-apple.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mt7621.o Add the missing MODULE_DESCRIPTION() macro. [kwilczynski: update MODULE_DESCRIPTION() text, commit log] Link: https://lore.kernel.org/linux-pci/20240626-md-drivers-pci-controller-v2-1-94c811db7a51@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Nirmal Patel <nirmal.patel@linux.intel.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> # MT7621
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2023-12-13PCI: vmd: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Link: https://lore.kernel.org/linux-pci/270f25cdc154f3b0309e57b2f6421776752e2170.1702230593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-12-11PCI: vmd: Fix potential deadlock when enabling ASPMJohan Hovold
The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.3 Cc: Michael Bottini <michael.a.bottini@linux.intel.com> Cc: David E. Box <david.e.box@linux.intel.com>
2023-10-28Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Fix space/tab whitespace issue (Xinghui Li) * pci/controller/vmd: PCI: vmd: Fix inconsistent indentation in vmd_resume()
2023-10-03PCI: Use PCI_HEADER_TYPE_* instead of literalsIlpo Järvinen
Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for Renesas R-Car
2023-10-03PCI: vmd: Correct PCI Header Type Register's multi-function checkIlpo Järvinen
vmd_domain_reset() attempts to find whether the device may contain multiple functions by checking 0x80 (Multi-Function Device), however, the hdr_type variable has already been masked with PCI_HEADER_TYPE_MASK so the check can never true. To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK. Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration") Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Nirmal Patel <nirmal.patel@linux.intel.com>
2023-09-18PCI: vmd: Fix inconsistent indentation in vmd_resume()Xinghui Li
The if-statement within the vmd_resume() function has an inconsistent indentation that leads to a compile time warning. Thus, correct the inconsistent indentation. While at it, remove the if-statement completely, which will make the code simpler. This was detected by Smatch: drivers/pci/controller/vmd.c:1066 vmd_resume() warn: inconsistent indenting No functional changes are intended. [kwilczynski: use correct tags, commit log] Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-pci/20230627113808.269716-1-korantwork@gmail.com Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Xinghui Li <korantli@tencent.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-08-22PCI: vmd: Disable bridge window for domain resetNirmal Patel
During domain reset process vmd_domain_reset() clears PCI configuration space of VMD root ports. But certain platform has observed following errors and failed to boot. ... DMAR: VT-d detected Invalidation Queue Error: Reason f DMAR: VT-d detected Invalidation Time-out Error: SID ffff DMAR: VT-d detected Invalidation Completion Error: SID ffff DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: Invalidation Time-out Error (ITE) cleared The root cause is that memset_io() clears prefetchable memory base/limit registers and prefetchable base/limit 32 bits registers sequentially. This seems to be enabling prefetchable memory if the device disabled prefetchable memory originally. Here is an example (before memset_io()): PCI configuration space for 10000:00:00.0: 86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00 00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20 00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00 ... So, prefetchable memory is ffffffff00000000-575000fffff, which is disabled. When memset_io() clears prefetchable base 32 bits register, the prefetchable memory becomes 0000000000000000-575000fffff, which is enabled and incorrect. Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec: The Prefetchable Memory Limit register must be programmed to a smaller value than the Prefetchable Memory Base register if there is no prefetchable memory on the secondary side of the bridge. This is believed to be the reason for the failure and in addition the sequence of operation in vmd_domain_reset() is not following the PCIe specs. Disable the bridge window by executing a sequence of operations borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(), that comply with the PCI specifications. Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-06-24PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()Xinghui Li
The ret variable in the vmd_enable_domain() function was used uninitialized when printing a warning message upon failure of the pci_reset_bus() function. Thus, fix the issue by assigning ret with the value returned from pci_reset_bus() before referencing it in the warning message. This was detected by Smatch: drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'. [kwilczynski: drop the second patch from the series, add missing reported by tag, commit log] Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges") Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Xinghui Li <korantli@tencent.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
2023-05-08PCI: vmd: Reset VMD config register between soft rebootsNirmal Patel
VMD driver can disable or enable MSI remapping by changing VMCONFIG_MSI_REMAP register. This register needs to be set to the default value during soft reboots. Drives failed to enumerate when Windows boots after performing a soft reboot from Linux. Windows doesn't support MSI remapping disable feature and stale register value hinders Windows VMD driver initialization process. Adding vmd_shutdown function to make sure to set the VMCONFIG register to the default value. Link: https://lore.kernel.org/r/20230224202811.644370-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
2023-02-02PCI: vmd: Add quirk to configure PCIe ASPM and LTRDavid E. Box
PCIe ports reserved for VMD use are not visible to BIOS and therefore not configured to enable PCIe ASPM or LTR values (which BIOS will configure if they are not set). Lack of this programming results in high power consumption on laptops as reported in bugzilla. For affected products use pci_enable_link_state to set the allowed link states for devices on the root ports. Also set the LTR value to the maximum value needed for the SoC. This is a workaround for products from Rocket Lake through Alder Lake. Raptor Lake, the latest product at this time, has already implemented LTR configuring in BIOS. Future products will move ASPM configuration back to BIOS as well. As this solution is intended for laptops, support is not added for hotplug or for devices downstream of a switch on the root port. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063 Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717 Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02PCI: vmd: Create feature grouping for client productsDavid E. Box
Simplify the device ID list by creating a grouping of features shared by client products. Suggested-by: Jon Derrick <jonathan.derrick@linux.dev> Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-02-02PCI: vmd: Use PCI_VDEVICE in device listDavid E. Box
Use PCI_VDEVICE to simplify the device table. Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2022-12-06PCI: vmd: Fix secondary bus reset for Intel bridgesFrancisco Munoz
The reset was never applied in the current implementation because Intel Bridges owned by VMD are parentless. Internally, pci_reset_bus() applies a reset to the parent of the PCI device supplied as argument, but in this case it failed because there wasn't a parent. In more detail, this change allows the VMD driver to enumerate NVMe devices in pass-through configurations when guest reboots are performed. There was an attempted to fix this, but later we discovered that the code inside pci_reset_bus() wasn’t triggering secondary bus resets. Therefore, we updated the parameters passed to it, and now NVMe SSDs attached to VMD bridges are properly enumerated in VT-d pass-through scenarios. Link: https://lore.kernel.org/r/20221206001637.4744-1-francisco.munoz.ruiz@linux.intel.com Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration") Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2022-11-11PCI: vmd: Disable MSI remapping after suspendNirmal Patel
MSI remapping is disabled by VMD driver for Intel's Icelake and newer systems in order to improve performance by setting VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared by firmware during boot. The same register gets cleared when system is put in S3 power state. VMD driver needs to set this register again in order to avoid interrupt issues with devices behind VMD if MSI remapping was disabled before. Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
2022-06-28PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUsFrancisco Munoz
Add support for VMD devices in MTL-H/P/U/S/M with bus restriction mode and vector 0 disabled for MSI-X remapping. Link: https://lore.kernel.org/r/20220628221023.190547-1-francisco.munoz.ruiz@linux.intel.com Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
2022-06-10PCI: vmd: Use devm_kasprintf() instead of simple kasprintf()Subramanian Mohan
Use devm_kasprintf() instead of simple kasprintf() to free allocated memory automatically when the device is freed. Suggested-by: Srikanth Thokala <srikanth.thokala@intel.com> Link: https://lore.kernel.org/r/20220531132617.20517-1-subramanian.mohan@intel.com Signed-off-by: Subramanian Mohan <subramanian.mohan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Nirmal Patel <nirmal.patel@linux.intel.com>
2022-05-12PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if ↵Nirmal Patel
interrupt remapping is enabled by IOMMU.") Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") The commit 2565e5b69c44 was added as a workaround to keep MSI-X remapping enabled if IOMMU enables interrupt remapping. VMD would keep running in low performance mode. There is no dependency between MSI-X remapping by VMD and interrupt remapping by IOMMU. Link: https://lore.kernel.org/r/20220511095707.25403-3-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-12PCI: vmd: Assign VMD IRQ domain before enumerationNirmal Patel
During the boot process all the PCI devices are assigned default PCI-MSI IRQ domain including VMD endpoint devices. If interrupt-remapping is enabled by IOMMU, the PCI devices except VMD get new INTEL-IR-MSI IRQ domain. And VMD is supposed to create and assign a separate VMD-MSI IRQ domain for its child devices in order to support MSI-X remapping capabilities. Now when MSI-X remapping in VMD is disabled in order to improve performance, VMD skips VMD-MSI IRQ domain assignment process to its child devices. Thus the devices behind VMD get default PCI-MSI IRQ domain instead of INTEL-IR-MSI IRQ domain when VMD creates root bus and configures child devices. As a result host OS fails to boot and DMAR errors were observed when interrupt remapping was enabled on Intel Icelake CPUs. For instance: DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [0xe2:0x00.0] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request To fix this issue, dev_msi_info struct in dev struct maintains correct value of IRQ domain. VMD will use this information to assign proper IRQ domain to its child devices when it doesn't create a separate IRQ domain. Link: https://lore.kernel.org/r/20220511095707.25403-2-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-02-21PCI: vmd: Prevent recursive locking on interrupt allocationThomas Gleixner
Tejas reported the following recursive locking issue: swapper/0/1 is trying to acquire lock: ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0 but task is already holding lock: ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290 stack backtrace: __mutex_lock+0x9d/0x920 msi_get_virq+0x30/0xc0 pci_irq_vector+0x26/0x30 vmd_msi_init+0xcc/0x210 msi_domain_alloc+0xbf/0x150 msi_domain_alloc_irqs_descs_locked+0x3e/0xb0 __pci_enable_msi_range+0x155/0x290 pci_alloc_irq_vectors_affinity+0xba/0x100 pcie_port_device_register+0x307/0x550 pcie_portdrv_probe+0x3c/0xd0 pci_device_probe+0x95/0x110 This is caused by the VMD MSI code which does a lookup of the Linux interrupt number for an VMD managed MSI[X] vector. The lookup function tries to acquire the already held mutex. Avoid that by caching the Linux interrupt number at initialization time instead of looking it up over and over. Fixes: 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()") Reported-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "Surendrakumar Upadhyay, TejaskumarX" <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: linux-pci@vger.kernel.org Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-05PCI: vmd: Add DID 8086:A77F for all Intel Raptor Lake SKU'sKarthik L Gopalakrishnan
Add support for this VMD device which supports the bus restriction mode. The feature that turns off vector 0 for MSI-X remapping is also enabled. Link: https://lore.kernel.org/r/20211217231211.46018-1-francisco.munoz.ruiz@linux.intel.com Signed-off-by: Karthik L Gopalakrishnan <karthik.l.gopalakrishnan@intel.com> Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
2022-01-04PCI: vmd: Honor ACPI _OSC on PCIe featuresKai-Heng Feng
When Samsung PCIe Gen4 NVMe is connected to Intel ADL VMD, the combination causes AER message flood and drags the system performance down. The issue doesn't happen when VMD mode is disabled in BIOS, since AER isn't enabled by acpi_pci_root_create() . When VMD mode is enabled, AER is enabled regardless of _OSC: [ 0.410076] acpi PNP0A08:00: _OSC: platform does not support [AER] ... [ 1.486704] pcieport 10000:e0:06.0: AER: enabled with IRQ 146 Since VMD is an aperture to regular PCIe root ports, honor ACPI _OSC to disable PCIe features accordingly to resolve the issue. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215027 Link: https://lore.kernel.org/r/20211203031541.1428904-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-01PCI: vmd: Clean up domain before enumerationNirmal Patel
During VT-d pass-through, the VMD driver occasionally fails to enumerate underlying NVMe devices when repetitive reboots are performed in the guest OS. The issue can be resolved by resetting VMD root ports for proper enumeration and triggering secondary bus reset which will also propagate reset through downstream bridges. Link: https://lore.kernel.org/r/20211116221136.85134-1-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
2021-11-18PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config readsNaveen Naidu
When config pci_ops.read() can detect failed PCI transactions, the data returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff). Obviously a successful PCI config read may *also* return that data if a config register happens to contain ~0, so it doesn't definitively indicate an error unless we know the register cannot contain ~0. Use PCI_POSSIBLE_ERROR() to check the response we get when we read data from hardware. This unifies PCI error response checking and makes error checks consistent and easier to find. Link: https://lore.kernel.org/r/ed01cad87a2e35f3865275b5fb34290817a1ebf8.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2021-11-05Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas
- Assign a number to each VMD controller to distinguish them in /proc/interrupts (Chunguang Xu) - Don't disable VMD MSI-X remapping if IOMMU remapping is enabled (Adrian Huang) - Add Kconfig dependency on !UML for allyesconfig build issue (Johannes Berg) * remotes/lorenzo/pci/vmd: PCI: vmd: depend on !UML PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU PCI: vmd: Assign a number to each VMD controller
2021-11-04PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>Krzysztof Wilczyński
We already include <linux/device.h> and <linux/msi.h>, which include <asm/device.h> and <asm/msi.h>. Drop the redundant includes of <asm/device.h> and <asm/msi.h>. [bhelgaas: squash in fix from Wan Jiabing <wanjiabing@vivo.com>: https://lore.kernel.org/r/20211104063720.29375-1-wanjiabing@vivo.com] Link: https://lore.kernel.org/r/20211013003145.1107148-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2021-10-12PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled ↵Adrian Huang
by IOMMU When enabling VMD in BIOS setup (Ice Lake Processor: Whitley platform), the host OS cannot boot successfully with the following error message: nvme nvme0: I/O 12 QID 0 timeout, completion polled nvme nvme0: Shutdown timeout set to 6 seconds DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [0x00:0x00.5] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request The request device is the VMD controller: # lspci -s 0000:00.5 -nn 0000:00:00.5 RAID bus controller [0104]: Intel Corporation Volume Management Device NVMe RAID Controller [8086:28c0] (rev 04) `git bisect` points to this offending commit ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible"), which disables VMD MSI remapping. The IOMMU hardware blocks the compatibility format interrupt request because Interrupt Remapping Enable Status (IRES) and Extended Interrupt Mode Enable (EIME) are enabled. Please refer to section "5.1.4 Interrupt-Remapping Hardware Operation" in Intel VT-d spec. To fix the issue, VMD driver still enables the interrupt remapping irrespective of VMD_FEAT_CAN_BYPASS_MSI_REMAP if the IOMMU subsystem enables the interrupt remapping. Test configuration is shown as follows: * Two VMD controllers 1. 8086:28c0 (Whitley's VMD) 2. 8086:201d (Purley's VMD: The issue does not appear in this controller. Just make sure if any side effect occurs.) * w/wo intremap=off Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214219 Link: https://lore.kernel.org/r/20210901124047.1615-1-adrianhuang0701@gmail.com Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Cc: Jon Derrick <jonathan.derrick@intel.com> Cc: Nirmal Patel <nirmal.patel@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de>
2021-10-07PCI: vmd: Assign a number to each VMD controllerChunguang Xu
If the system has multiple VMD controllers, the driver does not assign a number to each controller, so when analyzing the interrupt through /proc/interrupts, the names of all controllers are the same, which is not very convenient for problem analysis. Here, try to assign a number to each VMD controller. Link: https://lore.kernel.org/r/1631884404-24141-1-git-send-email-brookxu.cn@gmail.com Signed-off-by: Chunguang Xu <brookxu@tencent.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-09-02PCI: VMD: ACPI: Make ACPI companion lookup work for VMD busRafael J. Wysocki
On some systems, in order to get to the deepest low-power state of the platform (which may be necessary to save significant enough amounts of energy while suspended to idle. for example), devices on the PCI bus exposed by the VMD driver need to be power-managed via ACPI. However, the layout of the ACPI namespace below the VMD controller device object does not reflect the layout of the PCI bus under the VMD host bridge, so in order to identify the ACPI companion objects for the devices on that bus, it is necessary to use a special _ADR encoding on the ACPI side. In other words, acpi_pci_find_companion() does not work for these devices, so it needs to be amended with a special lookup logic specific to the VMD bus. Address this issue by allowing the VMD driver to temporarily install an ACPI companion lookup hook containing the code matching the devices on the VMD PCI bus with the corresponding objects in the ACPI namespace. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2021-03-22PCI: vmd: Disable MSI-X remapping when possibleJon Derrick
VMD will retransmit child device MSI-X using its own MSI-X table and requester-id. This limits the number of MSI-X available to the whole child device domain to the number of VMD MSI-X interrupts. Some VMD devices have a mode where this remapping can be disabled, allowing child device interrupts to bypass processing with the VMD MSI-X domain interrupt handler and going straight the child device interrupt handler, allowing for better performance and scaling. The requester-id still gets changed to the VMD endpoint's requester-id, and the interrupt remapping handlers have been updated to properly set IRTE for child device interrupts to the VMD endpoint's context. Some VMD platforms have existing production BIOS which rely on MSI-X remapping and won't explicitly program the MSI-X remapping bit. This re-enables MSI-X remapping on unload. Link: https://lore.kernel.org/r/20210210161315.316097-3-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2020-12-15Merge tag 'pci-v5.11-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Decode PCIe 64 GT/s link speed (Gustavo Pimentel) - Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) - Fix pci_slot_release() NULL pointer dereference (Jubin Zhong) - Unify ECAM constants in native PCI Express drivers (Krzysztof Wilczyński) - Return u8 from pci_find_capability() and similar (Puranjay Mohan) - Return u16 from pci_find_ext_capability() and similar (Bjorn Helgaas) - Fix ACPI companion lookup for device 0 on the root bus (Rafael J. Wysocki) Resource management: - Keep both device and resource name for config space remaps (Alexander Lobakin) - Bounds-check command-line resource alignment requests (Bjorn Helgaas) - Fix overflow in command-line resource alignment requests (Colin Ian King) Driver binding: - Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan) Power management: - Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) - Add sysfs attribute for device power state (Maximilian Luz) - Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg) - Do not generate wakeup event when runtime resuming device (Mika Westerberg) - Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar) Virtualization: - Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher) - Add function 1 DMA alias quirk for Marvell 9215 SATA controller (Bjorn Helgaas) MSI: - Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko) - Improve warnings for 32-bit-limited MSI support (Vidya Sagar) Error handling: - Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V Kelley) - Rename reset_link() to reset_subordinates() (Sean V Kelley) - Write AER Capability only when we control it (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Bind RCEC devices to the Root Port driver (Qiuxu Zhuo) - Recover from RCiEP AER errors (Qiuxu Zhuo) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley) - Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) Broadcom iProc PCIe controller driver: - Fix out-of-bound array accesses (Bharat Gooty) - Invalidate correct PAXB inbound windows (Roman Bacik) - Enhance PCIe Link information display (Srinath Mannam) Cadence PCIe controller driver: - Make "cdns,max-outbound-regions" property optional (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Offset client MSI-X vectors (Jon Derrick) - Update type of __iomem pointers (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Move "dbi" accesses to post common DWC initialization (Vidya Sagar) - Read "dbi" base address to program in application logic (Vidya Sagar) - Fix ASPM-L1SS advertisement disable code (Vidya Sagar) - Set DesignWare IP version (Vidya Sagar) - Continue unconfig sequence even if parts fail (Vidya Sagar) - Check return value of tegra_pcie_init_controller() (Vidya Sagar) - Disable LTSSM during L2 entry (Vidya Sagar) Qualcomm PCIe controller driver: - Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam) - Add SM8250 SoC support (Manivannan Sadhasivam) - Add support for configuring BDF to SID mapping for SM8250 (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - rcar: Drop unused members from struct rcar_pcie_host (Lad Prabhakar) - PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar) - PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro Shimoda) - PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda) Samsung Exynos PCIe controller driver: - Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung) - Rework driver to support Exynos5433 variant (Jaehoon Chung) - Drop samsung,exynos5440-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie-phy binding (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Support multiple ATU memory regions (Rob Herring) - Move intel-gw ATU offset out of driver match data (Rob Herring) - Move "dbi", "dbi2", and "addr_space" resource setup into common code (Rob Herring) - Remove intel-gw unneeded function wrappers (Rob Herring) - Ensure all outbound ATU windows are reset (Rob Herring) - Use the common MSI irq_chip in dra7xx (Rob Herring) - Drop the .set_num_vectors() host op (Rob Herring) - Move MSI interrupt setup into DWC common code (Rob Herring) - Rework MSI initialization (Rob Herring) - Move link handling into common code (Rob Herring) - Move dw_pcie_msi_init() into core (Rob Herring) - Move dw_pcie_setup_rc() to DWC common code (Rob Herring) - Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring) - Drop keystone duplicated 'num-viewport'" (Rob Herring) - Move inbound and outbound windows to common struct (Rob Herring) - Detect number of iATU windows (Rob Herring) - Warn if non-prefetchable memory aperture size is > 32-bit (Vidya Sagar) - Add support to program ATU for >4GB memory (Vidya Sagar) - Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar) TI J721E PCIe driver: - Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I) - Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Enable compile-testing on !ARM (Alex Dewar)" * tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller PCI/ACPI: Fix companion lookup for device 0 on the root bus PCI: Keep both device and resource name for config space remaps PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c PCI: vmd: Update type of the __iomem pointers PCI: iproc: Convert to use the new ECAM constants PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser PCI: Unify ECAM constants in native PCI Express drivers PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume PCI: Mark AMD Raven iGPU ATS as broken in some platforms PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument PCI: dwc: Set 32-bit DMA mask for MSI target address allocation PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: qcom: Add SM8250 SoC support ...
2020-12-15Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas
- Offset client VMD MSI-X vectors (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Offset Client VMD MSI-X vectors
2020-12-10PCI: vmd: Update type of the __iomem pointersKrzysztof Wilczyński
Use "void __iomem" instead "char __iomem" pointer type when working with the accessor functions (with names like readb() or writel(), etc.) to better match a given accessor function signature where commonly the address pointing to an I/O memory region would be a "void __iomem" pointer. Related: https://lwn.net/Articles/102232/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-5-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2020-12-10PCI: Unify ECAM constants in native PCI Express driversKrzysztof Wilczyński
Add ECAM-related constants to provide a set of standard constants defining memory address shift values to the byte-level address that can be used to access the PCI Express Configuration Space, and then move native PCI Express controller drivers to use the newly introduced definitions retiring driver-specific ones. Refactor pci_ecam_map_bus() function to use newly added constants so that limits to the bus, device function and offset (now limited to 4K as per the specification) are in place to prevent the defective or malicious caller from supplying incorrect configuration offset and thus targeting the wrong device when accessing extended configuration space. This refactor also allows for the ".bus_shift" initialisers to be dropped when the user is not using a custom value as a default value will be used as per the PCI Express Specification. Thanks to Qian Cai <qcai@redhat.com>, Michael Walle <michael@walle.cc>, and Vladimir Oltean <olteanv@gmail.com> for reporting a pci_ecam_create() issue with .bus_shift and to Vladimir for proposing the fix. [bhelgaas: incorporate Vladimir's fix, update commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-2-kw@linux.com Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-23PCI: vmd: Offset Client VMD MSI-X vectorsJon Derrick
Client VMD platforms have a software-triggered MSI-X vector 0 that will not forward hardware-remapped MSI from the sub-device domain. This causes an issue with VMD platforms that use AHCI behind VMD and have a single MSI-X vector remapped to VMD vector 0. Add a VMD MSI-X vector offset for these platforms. Link: https://lore.kernel.org/r/20201102222223.92978-1-jonathan.derrick@intel.com Tested-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-10-28PCI: vmd: Use msi_msg shadow structsThomas Gleixner
Use the x86 shadow structs in msi_msg instead of the macros. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-16-dwmw2@infradead.org
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
generated by cgit (git 2.34.1) at 2025-05-14 10:39:33 +0000