summaryrefslogtreecommitdiff
path: root/drivers/scsi/libsas
AgeCommit message (Collapse)Author
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-12-04scsi: Rename .device_configure() into .sdev_configure()Bart Van Assche
Improve naming consistency with the .sdev_prep() and .sdev_destroy() methods by renaming .device_configure() into .sdev_configure(). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: Rename .slave_alloc() and .slave_destroy()Bart Van Assche
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into .sdev_destroy(). The new names make it clear that these are actions on SCSI devices. Make this change in the SCSI core, SCSI drivers and also in the ATA drivers. No functionality has been changed. This patch has been created as follows: * Change the text "slave_alloc" into "sdev_init" in all source files except those in drivers/net/ and Documentation/. * Change the text "slave_destroy" into "sdev_destroy" in all source files except those in drivers/net/ and Documentation/. * Rename lpfc_no_slave() into lpfc_no_sdev(). * Manually adjust whitespace where necessary to restore vertical alignment (dc395x driver and include/linux/libata.h). Acked-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-19Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc, mpi3mr). There are no user visible core changes and a whole series of minor updates and fixes. The largest core change is probably the simplification of the workqueue allocation path" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits) scsi: smartpqi: update driver version to 2.1.30-031 scsi: smartpqi: fix volume size updates scsi: smartpqi: fix rare system hang during LUN reset scsi: smartpqi: add new controller PCI IDs scsi: smartpqi: add counter for parity write stream requests scsi: smartpqi: correct stream detection scsi: smartpqi: Add fw log to kdump scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port scsi: ufs: core: Remove ufshcd_urgent_bkops() scsi: core: Remove obsoleted declaration for scsi_driverbyte_string() scsi: bnx2i: Remove unused declarations scsi: core: Simplify an alloc_workqueue() invocation scsi: ufs: Simplify alloc*_workqueue() invocation scsi: stex: Simplify an alloc_ordered_workqueue() invocation scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations scsi: snic: Simplify alloc_workqueue() invocations scsi: qedi: Simplify an alloc_workqueue() invocation scsi: qedf: Simplify alloc_workqueue() invocations scsi: myrs: Simplify an alloc_ordered_workqueue() invocation ...
2024-08-22scsi: Expand all create*_workqueue() invocationsBart Van Assche
The workqueue maintainer wants to remove the create*_workqueue() macros because these macros always set the WQ_MEM_RECLAIM flag and because these only support literal workqueue names. Hence this patch that replaces the create*_workqueue() invocations with the definition of this macro. The WQ_MEM_RECLAIM flag has been retained because I think that flag is necessary for workqueues created by storage drivers. This patch has been generated by running spatch and git clang-format. spatch has been invoked as follows: spatch --in-place --sp-file expand-create-workqueue.spatch $(git grep -lEw 'create_(freezable_|singlethread_|)workqueue' */scsi */ufs) The contents of the expand-create-workqueue.spatch file is as follows: @@ expression name; @@ -create_workqueue(name) +alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, name) @@ expression name; @@ -create_freezable_workqueue(name) +alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1, name) @@ expression name; @@ -create_singlethread_workqueue(name) +alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name) Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240822195944.654691-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-08-02ata: libata: Remove ata_noop_qc_prep()Damien Le Moal
The function ata_noop_qc_prep(), as its name implies, does nothing and simply returns AC_ERR_OK. For drivers that do not need any special preparations of queued commands, we can avoid having to define struct ata_port qc_prep operation by simply testing if that operation is defined or not in ata_qc_issue(). Make this change and remove ata_noop_qc_prep(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
2024-07-17Merge tag 'ata-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv) Store the sense data for ATA PASS-THROUGH commands at the correct offset in the sense buffer when using fixed format sense data. Cleanup the logic related to generating sense data for PASS-THROUGH commands. Generating sense data for PASS-THROUGH commands would overwrite any eventual (real) sense data received from the device. Honor the D_SENSE bit when generating sense data for PASS-THROUGH commands. (The D_SENSE bit can be set by the user, and determines if the returned sense data should be in fixed format or descriptor format) - ata port allocation cleanups (me) Assign the ata port print_id at port allocation time, such that the ata_port_* print functions can be used earlier in the init call chain. Change the ata port port print_id to use ida_alloc(), such that print_ids will get reused on rmmod + modprobe, instead of being incremented indefinitely. Remove wrappers that only existed in order to export the internal libata functions which they wrapped, and instead export the libata functions directly. - Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm (Mario Limonciello) Using this default was not always a good idea before, because it would break hot plug support. However, with LPM changes in recent kernels, a port marked as external will not enable LPM (in order to not break hot plug), so it is now safe to change the default value of this Kconfig. All major Linux distros have had SATA_MOBILE_LPM_POLICY set to med_power_with_dipm for quite a long time - Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li) * tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci ata: ahci: Add debug print for external port ata,scsi: Remove wrapper ata_sas_port_alloc() ata: libata-core: Reuse available ata_port print_ids ata: libata: Assign print_id at port allocation time ata: libata-core: Remove local_port_no struct member ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc() ata: libata-core: Remove support for decreasing the number of ports ata: libata: Remove unused function declaration for ata_scsi_detect() ata,scsi: Remove wrappers ata_sas_tport_{add,delete}() ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf() ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error() ata: libata-scsi: Remove redundant sense_buffer memsets ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1 ata: libata-scsi: Fix offsets for the fixed format sense data dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
2024-07-04ata,scsi: Remove wrapper ata_sas_port_alloc()Niklas Cassel
The ata_sas_port_alloc() wrapper mainly exists in order to export the internal libata function which it wraps. The secondary reason is that it initializes some ata_port struct members. However, ata_sas_port_alloc() is only used in a single location, sas_ata_init(), which already performs some ata_port struct member initialization, so it does not make sense to spread this initialization out over two separate locations. Thus, remove the wrapper and instead export the libata function directly, and move the libsas specific ata_port initialization to sas_ata_init(), which already does some ata_port initialization. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240703184418.723066-19-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-04ata,scsi: Remove wrappers ata_sas_tport_{add,delete}()Niklas Cassel
The ata_sas_tport_add() and ata_sas_tport_delete() wrappers only exist in order to export the internal libata functions which they wrap. Remove the wrappers and instead export the libata functions directly. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240703184418.723066-12-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-07-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A couple of error leg problems, one affecting scsi_debug and the other affecting pure SAS (i.e. not SATA) SCSI expanders" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed scsi: scsi_debug: Fix create target debugfs failure
2024-06-30ata,scsi: libata-core: Do not leak memory for ata_port struct membersNiklas Cassel
libsas is currently not freeing all the struct ata_port struct members, e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL). Add a function, ata_port_free(), that is used to free a ata_port, including its struct members. It makes sense to keep the code related to freeing a ata_port in its own function, which will also free all the struct members of struct ata_port. Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-06-26scsi: libsas: Fix exp-attached device scan after probe failure scanned in ↵Xingui Yang
again after probe failed The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows: [78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
2024-04-20Merge patch series "scsi: libsas: Fix the failure of adding phy with ↵Martin K. Petersen
zero-address to new port" Xingui Yang <yangxingui@huawei.com> says: This series is to solve the problem of a BUG() when adding phy with zero address to a new port. Link: https://lore.kernel.org/r/20240312141103.31358-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-20scsi: libsas: Fix the failure of adding phy with zero-address to portXingui Yang
As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions"), reset the phy->entacted_sas_addr address to a zero-address when the link rate is less than 1.5G. Currently we find that when a new device is attached, and the link rate is less than 1.5G, but the device type is not NO_DEVICE, for example: the link rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting the phy->entacted_sas_addr address to the zero address, the port will continue to be created for the phy with the zero-address, and other phys with the zero-address will be tried to be added to the new port: [562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device) // phy19 is deleted but still on the parent port's phy_list [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp) [562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port Therefore, it should be the same as sas_get_phy_attached_dev(). Only when device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address. Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-20scsi: libsas: Set port when ex_phy is added or deletedXingui Yang
We found that when ex_phy was attached and added to the parent wide port, ex_phy->port was not set, resulting in sas_unregister_devs_sas_addr() not calling sas_port_delete_phy() when deleting the phy, and the deleted phy was still on the parent wide port's phy_list. When we use sas_port_add_ex_phy() to set ex_phy->port to solve the above problem, we find that after all the phys of the parent_port are removed and the number of phy becomes 0, the parent_port will not be set to NULL. This causes the freed parent port to be used when attaching a new ex_phy in sas_ex_add_parent_port(). Use sas_port_add_ex_phy() instead of sas_port_add_phy() to set ex_phy->port when ex_phy is added to the parent port, and set ex_dev->parent_port to NULL when the number of phy on the port becomes 0. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-4-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-20scsi: libsas: Move sas_add_parent_port() to sas_expander.cXingui Yang
Move sas_add_parent_port() to sas_expander.c and rename it to sas_ex_add_parent_port() as it is only used in this file. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-3-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-20scsi: libsas: Add helper for port add ex_phyXingui Yang
This moves the process of adding ex_phy to a port into a new helper. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-2-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-11scsi: libata: Switch to using ->device_configureChristoph Hellwig
Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240409143748.980206-21-hch@lst.de Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-01scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGNYihang Li
This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes (from 128). In libsas, this will cause SMP requests to be 8-byte aligned through kmalloc() allocation. However, for hisi_sas hardware, all command addresses must be 16-byte-aligned. Otherwise, the commands fail to be executed. ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request. Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com [1] Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240328090626.621147-1-liyihang9@huawei.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-27scsi: libsas: Fix declaration of ncq priority attributesDamien Le Moal
Commit b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices") introduced support for ATA NCQ priority control for ATA devices managed by libsas. This commit introduces the ncq_prio_supported and ncq_prio_enable sysfs device attributes to discover and control the use of this features, similarly to libata. However, libata publicly declares these device attributes and export them for use in ATA low level drivers. This leads to a compilation error when libsas and libata are built-in due to the double definition: ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:900: multiple definition of `dev_attr_ncq_prio_supported'; drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:984: first defined here ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:1026: multiple definition of `dev_attr_ncq_prio_enable'; drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:1022: first defined here Resolve this problem by directly declaring the libsas attributes instead of using the DEVICE_ATTR() macro. And for good measure, the device attribute variables are also renamed. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240327020122.439424-1-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25Merge patch series "NCQ Priority sysfs sttributes for libsas"Martin K. Petersen
Igor Pylypiv <ipylypiv@google.com> says: This patch series adds ncq_prio_supported and ncq_prio_enable sysfs attributes for libsas managed SATA devices. Existing libata sysfs attributes cannot be used directly because the ata_port location is different for libsas. Link: https://lore.kernel.org/r/20240307214418.3812290-1-ipylypiv@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: libsas: Define NCQ Priority sysfs attributes for SATA devicesIgor Pylypiv
libata sysfs attributes cannot be used for libsas-managed SATA devices because the ata_port location is different for libsas. Defined sysfs attributes (visible for SATA devices only): - /sys/block/sda/device/ncq_prio_enable - /sys/block/sda/device/ncq_prio_supported The newly defined attributes will pass the correct ata_port to libata helper functions. Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20240307214418.3812290-3-ipylypiv@google.com Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: libsas: Fix disk not being scanned in after being removedXingui Yang
As of commit d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info"), do discovery will send a new SMP_DISCOVER and update phy->phy_change_count. We found that if the disk is reconnected and phy change_count changes at this time, the disk scanning process will not be triggered. Therefore, call sas_set_ex_phy() to update the PHY info with the results of the last query. And because the previous phy info will be used when calling sas_unregister_devs_sas_addr(), sas_unregister_devs_sas_addr() should be called before sas_set_ex_phy(). Fixes: d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-3-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()Xingui Yang
Add a helper to get attached_sas_addr and device type from disc_resp. Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-2-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: libsas: Declare sas_discover_end_dev() staticDamien Le Moal
sas_discover_end_dev() is defined and used only in sas_discover.c. Define this function as static. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-4-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: libsas: Declare sas_set_phy_speed() staticDamien Le Moal
sas_set_phy_speed() is used only within sas_init.c. Declare this function as static. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-3-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: libsas: Move local functions declarations to sas_internal.hDamien Le Moal
Move the declarations of functions used only within libsas from include/scsi/libsas.h to drivers/scsi/libsas/sas_internal.h Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-2-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ...
2023-09-05Merge tag 'ata-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Fix OF include file for ata platform drivers (Rob) - Simplify various ahci, sata and pata platform drivers using the function devm_platform_ioremap_resource() (Yangtao) - Cleanup libata time related argument types (e.g. timeouts values) (Sergey) - Cleanup libata code around error handling as all ata drivers now define a error_handler operation (Hannes and Niklas) - Remove functions intended for libsas that are in fact unused (Niklas) - Change the remove device callback of platform drivers to a null function (Uwe) - Simplify the pata_imx driver using devm_clk_get_enabled() (Li) - Remove old and uinused remnants of the ide code in arm, parisc, powerpc, sparc and m68k architectures and associated drivers (pata_buddha, pata_falcon and pata_gayle) (Geert) - Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010 drivers (me) - Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita, Michael) - Add Elkhart Lake AHCI controller support to the ahci driver (Werner) - Disable NCQ trim on Micron 1100 drives (Pawel) * tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits) ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives ata: ahci: Add Elkhart Lake AHCI controller ata: pata_falcon: add data_swab option to byte-swap disk data ata: pata_falcon: fix IO base selection for Q40 ata: pata_ep93xx: use soc_device_match for UDMA modes ata: pata_ep93xx: fix error return code in probe ata: sata_gemini: Add missing MODULE_DESCRIPTION ata: pata_ftide010: Add missing MODULE_DESCRIPTION m68k: Remove <asm/ide.h> ata: pata_gayle: Remove #include <asm/ide.h> ata: pata_falcon: Remove #include <asm/ide.h> ata: pata_buddha: Remove #include <asm/ide.h> asm-generic: Remove ide_iops.h sparc: Remove <asm/ide.h> powerpc: Remove <asm/ide.h> parisc: Remove <asm/ide.h> ARM: Remove <asm/ide.h> ata: pata_imx: Use helper function devm_clk_get_enabled() ata: sata_rcar: Convert to platform remove callback returning void ata: sata_mv: Convert to platform remove callback returning void ...
2023-08-30scsi: libsas: Simplify sas_queue_reset() and remove unused codeWenchao Hao
sas_queue_reset() is always called with param "wait" set to 0, so remove it from this function's parameter list. Also remove unused function sas_wait_eh(). Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230729102451.2452826-1-haowenchao2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-24Merge patch series "libsas: Some tidy-up"Martin K. Petersen
John Garry <john.g.garry@oracle.com> says: This series tidies-up libsas a bit, including: - delete structure(s) with only one member - delete structure members which are only ever set - delete structure members which are never set and code which relies on that member being set This conflicts with the following series: https://lore.kernel.org/linux-scsi/20230809132249.37948-1-yuehaibing@huawei.com/ Any conflict should be trivial to resolve. Based on mkp-scsi staging at a18e81d17a7e ("scsi: ufs: ufs-pci: Add support for QEMU") Link: https://lore.kernel.org/r/20230815115156.343535-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-24Merge patch series "Returning FIS on success for CDL"Martin K. Petersen
Igor Pylypiv <ipylypiv@google.com> says: This patch series plumbs libata's request for a result taskfile (ATA_QCFLAG_RESULT_TF) through libsas to pm80xx LLDD. Other libsas LLDDs can start using the newly added return_fis_on_success as well, if needed. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). pm80xx HBAs do not return FIS on success by default, hence, the driver is updated to set the RETFIS bit (Return FIS on good completion) when requested by libsas. Link: https://lore.kernel.org/r/20230819213040.1101044-1-ipylypiv@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Delete sas_ssp_task.retry_countJohn Garry
Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.retry_count is only ever set, so delete it. The aic94xx driver also had its own retry_count definition in struct scb sub-structs, which may have caused a mix-up. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-6-john.g.garry@oracle.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Delete struct scsi_coreJohn Garry
Since commit 79855d178557 ("libsas: remove task_collector mode"), struct scsi_core only contains a reference to the shost. struct scsi_core is only used in sas_ha_struct.core, so delete scsi_core and replace with a reference to the shost there. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-5-john.g.garry@oracle.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Delete enum sas_classJohn Garry
enum sas_class prob would have been useful if function sas_show_class() was ever implemented, which it wasn't. enum sas_class is used as asd_sas_port.class and asd_sas_phy.class, which are only ever set, so delete these members and the enum. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-3-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Add return_fis_on_success to sas_ata_taskIgor Pylypiv
Set return_fis_on_success when libata requests result taskfile. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20230819213040.1101044-2-ipylypiv@google.com Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Remove unused declarationsYue Haibing
Commit 042ebd293b86 ("scsi: libsas: kill useless ha_event and do some cleanup") removed sas_hae_reset() but not its declaration. Commit 2908d778ab3e ("[SCSI] aic94xx: new driver") declared but never implemented other functions. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230809132249.37948-1-yuehaibing@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-02ata,scsi: remove ata_sas_port_init()Niklas Cassel
ata_sas_port_init() now only contains a single initialization. Move this single initialization to ata_sas_port_alloc(), since: 1) ata_sas_port_alloc() already initializes some of the struct members. 2) ata_sas_port_alloc() is only used by libsas. Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: cleanup __ata_port_probe()Hannes Reinecke
Rename __ata_port_probe() to ata_port_probe() and drop the wrapper ata_sas_async_probe(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: remove ata_sas_port_destroy()Hannes Reinecke
Is now a wrapper around kfree(), so call it directly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: remove ata_sas_port_{start,stop} callbacksHannes Reinecke
Callbacks are empty now, so remove them. Also, remove the call to ap->ops->port_start() in ata_sas_port_init(), as this would otherwise cause a NULL pointer dereference, now when the callback is gone. Signed-off-by: Hannes Reinecke <hare@suse.de> [niklas: remove the call to ap->ops->port_start() in ata_sas_port_init()] Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
2023-06-05ata: libata-sata: Simplify ata_change_queue_depth()Damien Le Moal
Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control") added a struct ata_device argument to ata_change_queue_depth() to address problems with changing the queue depth of ATA devices managed through libsas. This was due to problems with ata_scsi_find_dev() which are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct device no in ata_find_dev()"). Undo some of the changes of commit 141f3d6256e5: remove the added struct ata_device aregument and use again ata_scsi_find_dev() to find the target ATA device structure. While doing this, also make sure that ata_scsi_find_dev() is called with ap->lock held, as it should. libsas and libata call sites of ata_change_queue_depth() are updated to match the modified function arguments. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-05-08scsi: libsas: factor out sas_check_fanout_expander_topo()Jason Yan
To be consistent with sas_check_edge_expander_topo(), factor out sas_check_fanout_expander_topo(). And remove the comment since we are not spilling over 80 colums now. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-4-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: libsas: Remove an empty branch in sas_check_parent_topology()Jason Yan
There is an empty "all good" branch in sas_check_parent_topology(). We can reverse the test statement and remove the empty branch. Moreover, factor out a helper sas_check_edge_expander_topo() to make the code more readable. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-3-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: libsas: Simplify sas_check_eeds()Jason Yan
In sas_check_eeds() there is an empty branch. We can reverse the test expression and then remove the empty branch. Also the test expression is a little bit complex so it deserves an individual function. And make the continuing prototype lines indented after the opening parenthesis to follow the standard coding style. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-2-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-02scsi: libsas: Abort all in-flight requests when device is goneJason Yan
When a disk is removed with in-flight I/O, the application needs to wait for 30 seconds (depending on the timeout configuration) to hear back from the kernel. Xingui tried to fix this issue by aborting the ATA link for SATA devices[1], however this approach left the SAS devices unresolved. Try to fix this issue by aborting all in-flight requests when the device is gone. This is implemented by iterating over the tagset. [1] https://lore.kernel.org/lkml/234e04db-7539-07e4-a6b8-c6b05f78193d@opensource.wdc.com/T/ Cc: Xingui Yang <yangxingui@huawei.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230330110930.175539-1-yanaijie@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ...
generated by cgit (git 2.34.1) at 2025-05-10 04:31:10 +0000