| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
|
|
soc/drivers-2
FSL SOC Changes for 6.15:
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
* tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"
This reverts commit 36f5f026df6c1cd8a20373adc4388d2b3401ce91, reversing
changes made to 43a7eec035a5b64546c8adefdc9cf96a116da14b.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC arm platform updates from Arnd Bergmann:
"The at91 platform gains support for SAMA7D65, a new variant of the
Cortex-A7 based SAMA7G5 with a graphics output.
The i.MX, Renesas and davinci platforms each get one minor bugfix"
* tag 'soc-arm-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: davinci: always enable CONFIG_ARCH_DAVINCI_DA850
ARM: imx: mark imx53_suspend_sz as unused
ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
ARM: at91: pm: Add Backup mode for SAMA7D65
ARM: at91: pm: add DT compatible support for sama7d65
ARM: at91: pm: fix at91_suspend_finish for ZQ calibration
dt-bindings: ARM: at91: add Calao USB boards
dt-bindings: ARM: at91: make separate entry for Olimex board
ARM: at91: Add Support in SoC driver for SAMA7D65
dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID
ARM: shmobile: rcar-gen2: Remove CMA reservation code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20250319092951.37667-49-jirislaby@kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.15
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
* tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: config: ti-sci: Default set to ARCH_K3 for the ti sci driver
soc: ti: k3-socinfo: Do not use syscon helper to build regmap
Link: https://lore.kernel.org/r/20250312113826.ka63nijuftgs6h52@mocker
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung mach/soc changes for v6.15
1. S3C: Drop linux/fb.h header.
2. Exynos ChipID: Check if memory allocation succeeded.
* tag 'samsung-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe()
ARM: s3c: Do not include <linux/fb.h>
Link: https://lore.kernel.org/r/20250309185601.10616-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.15-rc1
A simple cleanup patch to use str_yes_no() instead of an open-coded
version.
* tag 'tegra-for-6.15-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250307162332.3451523-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip AT91 SoC updates for v6.15
This update includes:
- SoC driver support for Microchip SAMA7D65
- power management support for Microchip SAMA7D65
- power management fixes
- documentation fixes
* tag 'at91-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
ARM: at91: pm: Add Backup mode for SAMA7D65
ARM: at91: pm: add DT compatible support for sama7d65
ARM: at91: pm: fix at91_suspend_finish for ZQ calibration
dt-bindings: ARM: at91: add Calao USB boards
dt-bindings: ARM: at91: make separate entry for Olimex board
ARM: at91: Add Support in SoC driver for SAMA7D65
dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID
Link: https://lore.kernel.org/r/20250312173755.975074-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
String assembly should use sysfs_emit_at() instead of sysfs_emit().
Fixes: 23fe8112a231 ("soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250314100143.3377268-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add missing compatibles and pdm_domain_data for SDM630 and SDM636.
Unlike their older brother (SDM660) these two cut down SoCs lack CDSP.
Other protection domains are the same as the ones for SDM660.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250217050251.298163-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/all/20250313130321.568379110@linutronix.de
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203638.1013670-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This does not necessarily get included through asm/io.h:
drivers/soc/samsung/exynos3250-pmu.c:120:18: error: use of undeclared identifier 'ARRAY_SIZE'
120 | for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
| ^
drivers/soc/samsung/exynos5250-pmu.c:162:18: error: use of undeclared identifier 'ARRAY_SIZE'
162 | for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250305211446.43772-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.15
This adds entries for new and missing SoCs in the MediaTek SoCInfo
driver (MT8370AV/AZA, MT8390AV/AZA) and an extra entry for a new
revision of the MT8395AV/ZA SoC.
The MediaTek SoCInfo driver also gets its SoC attribute information
restructured: now the family, machine and soc_id fields are correctly
populated.
MT8188 gains support for the secondary Display Parallel Interface
used for HDMI, and for the Display Stream Compression component
routing through mmsys and mutex tables.
All of the MMSYS drivers get an important overhaul: it was found that,
in multiple cases, the tables contained wrong mask/value pairs, hence
those were doing either nothing or breaking routings.
The mmsys tables were converted to use a newly introduced macro that
will perform a compile time check, making sure that each table entry's
value fits in the declared register mask.
Thanks to the new macro, multiple MediaTek SoCs got multiple fixes in
their MMSYS tables, addressing issues that were severely impacting the
functionality of the display controller pipelines.
* tag 'mtk-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
soc: mediatek: mt8167-mmsys: Fix missing regval in all entries
soc: mediatek: mt8188-mmsys: Migrate to MMSYS_ROUTE() macro
soc: mediatek: mtk-mmsys: Add compile time check for mmsys routes
soc: mediatek: mtk-mmsys: Fix MT8188 VDO1 DPI1 output selection
soc: mediatek: mtk-mutex: Add DPI1 SOF/EOF to MT8188 mutex tables
soc: mediatek: mtk-socinfo: Avoid using machine attribute in SoC detection log
soc: mediatek: mtk-socinfo: Add entry for MT8390AV/AZA Genio 700
soc: mediatek: mtk-socinfo: Add entry for MT8370AV/AZA Genio 510
soc: mediatek: mtk-socinfo: Restructure SoC attribute information
Link: https://lore.kernel.org/r/20250306113540.148342-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Apple SoC RTKit IPC library updates for 6.15:
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
* tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Cut syslog messages after the first '\0'
soc: apple: rtkit: Use high prio work queue
soc: apple: rtkit: Implement OSLog buffers properly
soc: apple: rtkit: Add and use PWR_STATE_INIT instead of _ON
soc: apple: rtkit: Fix use-after-free in apple_rtkit_crashlog_rx()
soc: apple: rtkit: Pass the crashlog to the crashed() callback
soc: apple: rtkit: Check & log more failures
Link: https://lore.kernel.org/r/20250302113842.58092-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.15
- Add a driver for the System Controller on RZ/G3S, RZ/G3E, and
RZ/V2H.
* tag 'renesas-drivers-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: r9a09g057-sys: Add a callback to print SoC-specific extra features
soc: renesas: rz-sysc: Move RZ/V2H SoC detection to the SYS driver
soc: renesas: rz-sysc: Add support for RZ/G3E family
soc: renesas: rz-sysc: Move RZ/G3S SoC detection to the SYSC driver
soc: renesas: Add SYSC driver for Renesas RZ family
Link: https://lore.kernel.org/r/cover.1740156741.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Mediatek Genio 1200 EVK P1V2 board has a different socinfo match
for MT8395 SoC (commercial name Genio 1200), so add it the driver.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250220-mtk-socinfo-genio-1200-evk-v1-1-a683ad028bc5@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add routing paths to support Display Stream Compression on the
VDOSYS0 pipelines ending with DSI or DisplayPort (DP_INTF).
Link: https://lore.kernel.org/r/20250212100012.33001-9-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Now that all of the mmsys routing tables have been fixed,
migrate all of them to use the MMSYS_ROUTE() macro: this
will make sure that future additions to any of the tables
for the currently supported SoCs are compile-time sanity
checked, greatly reducing room for (way too common) mistakes.
Link: https://lore.kernel.org/r/20250212100012.33001-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mmsys driver reads the routing table and writes to the
hardware `val & mask`, but multiple entries in the mmsys
routing table for the MT8365 SoC are setting a 0x0 mask:
this effectively writes .. nothing .. to the hardware.
That would never work, and if the display controller was
actually working with the mmsys doing no routing at all,
that was only because the bootloader was correctly setting
the display controller routing registers before booting the
kernel, and the mmsys was never reset.
Make this table to actually set the routing by adding the
correct register masks to it.
While at it, also change MOUT val definitions to BIT(x), as
the MOUT registers are effectively checking for each bit to
enable output to the corresponding HW.
Please note that, for this SoC, only the MOUT registers are
checking bits (as those can enable multiple outputs), while
the others are purely reading a number to select an input.
Fixes: bc3fc5c05100 ("soc: mediatek: mmsys: add MT8365 support")
Link: https://lore.kernel.org/r/20250212100012.33001-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mmsys routing table for this SoC was effectively missing
initialization of the val variable of struct mtk_mmsys_routes:
this means that `val` was incorrectly initialized to zero,
hence the registers were wrongly initialized.
Add the required regval to all of the entries of the routing
table for this SoC to fix display controller functionality.
Fixes: 060f7875bd23 ("soc: mediatek: mmsys: Add support for MT8167 SoC")
Link: https://lore.kernel.org/r/20250212100012.33001-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Change the initialization data in the arrays of structure
mtk_mmsys_routes to make use of the MMSYS_ROUTE() macro:
this will make sure that each array entry's SEL value fits
in its corresponding register mask with a compile time check.
Link: https://lore.kernel.org/r/20250212100012.33001-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Every MediaTek SoC with multimedia capabilities has an array of
structure mtk_mmsys_routes that defines a multimedia connection
between hardware components.
This connection is activated by writing a (masked) value in each
specific register, and the association between from->to path and
value to write is expressed as an entry in that array.
Failing to set the right path does not give any meaningful error
and makes things to simply not work as the data will either not
be retrieved from the right input port, or will be written to
the wrong output port (or both): since a misconfiguration may
effectively still be a possibly correct configuration at the HW
level, this may be only giving side effects in terms of simply
getting no functionality but, again, no errors.
In order to reduce room for mistakes in declarations of the
mmsys routes, add a macro that compile-time checks that the
provided value does at least fit in the register mask.
Link: https://lore.kernel.org/r/20250212100012.33001-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The VDO1_MERGE4 hardware (merge5 software component) should be
set to enable output to DPI1_SEL by setting BIT(2) but, despite
the intention being exactly that, this won't work because the
declared register mask is wrong as it is set as GENMASK(1, 0).
Register MERGE4_MOUT_EN in VDO1 has four used bits [3, 0] so
fix the mask to reflect that.
That, in turn, allows the mmsys driver to actually set BIT(2)
in this register, fixing the MERGE4 output to DPI1 selection.
Fixes: c0349314d5a0 ("soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys")
Link: https://lore.kernel.org/r/20250212100012.33001-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
MT8188 uses DPI1 to output to the HDMI controller: add the
Start of Frame and End of Frame configuration for the DPI1
IP to the tables to unblock generation and sending of these
signals to the GCE.
Link: https://lore.kernel.org/r/20250212100012.33001-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The recently introduced SoC attribute info rework avoided modifying the
machine attribut but still used it in the log message on successful SoC
matching. It leads to print a confusing log about a board-related info
(read from devicetree) and not about the matched SoC:
```
mtk-socinfo mtk-socinfo.0.auto: MediaTek MediaTek Genio-510 EVK SoC
detected
```
So, fix the dev_info format to display SoC family and name attribute
instead.
```
mtk-socinfo mtk-socinfo.0.auto: MediaTek Genio 510 (MT8370) SoC detected.
```
Fixes: da77c2d3d06c ("soc: mediatek: mtk-socinfo: Restructure SoC attribute information")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250221-mtk-socinfo-fix-print-v1-1-20500f30ef66@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add the product ID of Exynos7870 (S5E7870) to the existing list.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-v4-3-2925537f9b2a@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Certain messages from DCP contain NUL bytes in the random data after the
NUL terminated syslog message. Since the syslog message ends with '\n'
this results in a dev_info() message terminated with two newlines and an
empty printed line in the kernel log.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-4-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-3-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Apparently nobody can figure out where the old logic came from, but it
seems like it has never been actually used on any supported firmware to
this day. OSLog buffers were apparently never requested.
But starting with 13.3, we actually need this implemented properly for
MTP (and later AOP) to work, so let's actually do that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-2-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
This state is needed to wake the dcp IOP after m1n1 shut it down
and works for all other co-processors as well.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-1-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add support for SAMA7D65 SoC in the SoC driver.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/84b4a7ec0025741bc3ab647671fd4e880b2ed1d5.1739555984.git.Ryan.Wanner@microchip.com
[claudiu.beznea: add a space after compatibles to comply with the
existing format]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d37799 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add check for the return value of devm_kstrdup() in
loongson2_guts_probe() to catch potential exception.
Fixes: b82621ac8450 ("soc: loongson: add GUTS driver for loongson-2 platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://lore.kernel.org/r/20250220081714.2676828-1-haoxiang_li2024@163.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Some RZ/V2H SoC variants feature a Mali-G31 (GPU) and/or a Mali-C55
(ISP) IP(s). Detect and inform about their presence during SoC
identification. Also detect PLL frequency and warn in case of mismatch.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-6-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the other SoC variant of the same family, the system controller
provides SoC ID in its own registers.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SoC detection support for the RZ/G3E SoC. Also add support for
detecting the number of cores and the ETHOS-U55 NPU, and also detect PLL
mismatch for SW settings other than 1.7GHz.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that we have SoC detection in the RZ SYSC driver, move the RZ/G3S
SoC detection to it. The SYSC provides SoC ID in its own registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The RZ/G3S system controller (SYSC) has various registers that control
different functionalities. One of the exposed register offers
information about the SoC identification.
Add a driver that identifies the SoC. Later the driver will be extended
with other functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add EXYNOS2200 information to soc_ids tables. This SoC product id
is "0xE9925000".
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250215112716.159110-5-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This code calls kfree(bfr); and then passes "bfr" to rtk->ops->crashed()
which is a use after free. The ->crashed function pointer is implemented
by apple_nvme_rtkit_crashed() and it doesn't use the "bfr" pointer so
this doesn't cause a problem. But it still looks sketchy as can be.
Fix this by moving kfree() after the last usage of bfr.
Fixes: bf8b4e49777d ("soc: apple: rtkit: Pass the crashlog to the crashed() callback")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20250212085853.1357906-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
