summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea/usbmisc_imx.c
AgeCommit message (Collapse)Author
2025-03-03usb: chipidea: imx: fix some typoXu Yang
bootlader -> bootloader set_wakeup failed -> hsic_set_clk failed Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250225062843.3930041-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-12usb: chipidea: imx: add imx8ulp supportXu Yang
The dtbinding have imx7ulp and imx8ulp compatible with imx7d before. And then the dtb follow the dtbinding. However, the driver doesn't add imx8ulp compatible now. To make imx8ulp work well, this will add support for it. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20241111090916.1534047-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25usb: chipidea: imx: add one fsl picophy parameter tuning implementationXu Yang
In some cases, the user may need to tune the rise/fall time of the high-speed transmitter waveform for USB Certification. This will add a parameter for this purpose. The value will be fetched from dtb and finally written to the register. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0Xu Yang
In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work. Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25usb: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13usb: chipidea: imx: add missing USB PHY DPDM wakeup settingXu Yang
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup is not required(/sys/.../wakeup is disabled), this bit should be disabled, otherwise we will have unexpected wakeup if do USB device connect/disconnect while system sleep. This bit can be enabled for both host and device mode. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13usb: chipidea: imx: turn off vbus comparator when suspendXu Yang
As we use bvalid for vbus wakeup source, to save power when suspend, turn off the vbus comparator for imx7d and imx8mm. Below is this bit description from RM of iMX8MM "VBUS Valid Comparator Enable: This signal controls the USB OTG PHY VBUS Valid comparator which indicates whether the voltage on the USB_OTG*_VBUS pin is below the VBUS Valid threshold. The VBUS Valid threshold is nominally 4.75V on this USB PHY. The VBUS Valid threshold can be adjusted using the USBNC_OTGn_PHY_CFG1[OTGTUNE0] bit field. Status of the VBUS Valid comparator, when it is enabled, is reported on the USBNC_OTGn_PHY_STATUS[VBUS_VLD] bit. When OTGDISABLE0 (USBNC_USB_OTGx_PHY_CFG2[10])is set to 1'b0 and DRVVBUS0 is set to 1'b1, the Bandgap circuitry and VBUS Valid comparator are powered, even in Suspend or Sleep mode. DRVVBUS0 should be reset to 1'b0 when the internal VBUS Valid comparator is not required, to reduce quiescent current in Suspend or Sleep mode. - 0 The VBUS Valid comparator is disabled - 1 The VBUS Valid comparator is enabled" Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230517081907.3410465-2-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-29usb: chipidea: imx: remove one duplicated reg defineXu Yang
Remove one duplicated definition of MX7D_USB_OTG_PHY_CFG1. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230517081907.3410465-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-06usb: chipidea: imx: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221212212717.3774606-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7ulpLi Jun
imx7ulp can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related power lost check API. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-9-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx7dLi Jun
imx7d can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-8-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: add power lost check for imx6sxLi Jun
imx6sx mega off can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-7-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-23usb: chipidea: usbmisc: group usbmisc operations for PMLi Jun
As there maybe more APIs of usbmisc for suspend and resume, group them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check API, so that proper resume operations can be performed in power lost case. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: chipidea: imx: Fix Battery Charger 1.2 CDP detectionBreno Lima
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>
2020-12-10usb: chipidea: usbmisc_imx: Use of_device_get_match_data()Fabio Estevam
The retrieval of driver data via of_device_get_match_data() can make the code simpler. Use of_device_get_match_data() to simplify the code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-08-23usb: chipidea: imx: add two samsung picophy parameters tuning implementationPeter Chen
These two parameters are used to improve USB signal for board level, in this commit, we read it from the dtb, and write to related register during the initialization. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-29Merge tag 'usb-ci-v5.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: ENDIAN issue fix and one query controller role API is introduced. * tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: get available runtime dr mode for wakeup setting usb: chipidea: add query_available_role interface Documentation: ABI: usb: chipidea: Update Li Jun's e-mail usb: chipidea: udc: fix the ENDIAN issue
2020-07-28usb: chipidea: imx: get available runtime dr mode for wakeup settingPeter Chen
If runtime dr_mode is not dual-role, it doesn't need to enable ID wakeup interrupt. If runtime dr_mode is host, it doesn't need to enable VBUS wakeup interrupt. With these changes, the user will not get the unexpected wakeup for single role use case. For example, the host-only use case at Micro-AB port, the controller should not be waken up by only plug in Micro-AB cable or the Micro-B cable with host. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-07-09usb: chipidea: usbmisc_imx: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment block No attempt has been made to document the demoted function here. Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/usbmisc_imx.c:801: warning: Function parameter or member 'data' not described in 'imx7d_charger_detection' Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-24-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-06usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulpPeter Chen
imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the features are supported by non-core register are a little different. For example, autoresume feature is supported by all controllers for imx7ulp, but for imx7d, it is only supported by non-HSIC controller. Besides, these two platforms use different HSIC controller, imx7ulp needs software operation, but imx7d doesn't. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06usb: chipidea: introduce imx7d USB charger detectionJun Li
imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver. The USB generic PHY driver is impossible to have a charger detection for every user, so we implement USB charger detection routine at glue layer. After the detection has finished, it will notify USB PHY charger framework, and the uevents will be triggered. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-11-18usb: chipidea: imx: enable vbus and id wakeup only for OTG eventsLi Jun
If ID or VBUS is from external block, don't enable its wakeup because it isn't used at all. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-06-14usb: chipidea: imx: Use devm_platform_ioremap_resource()Fabio Estevam
Use devm_platform_ioremap_resource() to simplify the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-06-14usb: chipidea: imx: add imx7ulp supportPeter Chen
In this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-02-27usb: chipidea: imx: set power polarityPhilipp Puschmann
This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-11usb: chipidea: imx: allow to configure oc polarity on i.MX25Uwe Kleine-König
Up to now the polarity of the over current pin was hard coded to active high. Use the already defined device tree properties to configure polarity on i.MX25, too. In difference to i.MX6/7 use active high behavior if the polarity is unspecified to keep compatibility to existing device trees. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-12-11usb: chipidea: imx: support configuring for active low oc signalUwe Kleine-König
The status quo on i.MX6 is that if "over-current-active-high" is specified in the device tree this is configured as expected. If the property is missing polarity isn't changed and so the polarity is kept as setup by the bootloader. Reset default is active high, so active low can only be used with help by the bootloader. On i.MX7 it is similar, but there disabling of over current detection has a similar inconsistency. This patch introduces a new property that allows to explicitly configure for active low over current detection and consistently sets this up. In the absence of an explicit configuration the bit is kept as is. On i.MX7 over current detection is used unless disabled in the device tree. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-12-11usb: chipidea: imx: add HSIC supportPeter Chen
To support imx HSIC, there are some special requirement: - The HSIC pad is 1.2v, it may need to supply from external - The data/strobe pin needs to be pulled down first, and after host mode is initialized, the strobe pin needs to be pulled up - During the USB suspend/resume, special setting is needed Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-09-20usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier matchMarcus Folkesson
The SPDX-License-Identifier is set to GPL-2.0+, which correspond to MODULE_LICENSE "GPL". Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-09-20usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already ↵Nicolas Adell
started When initializing the USB subsystem before starting the kernel, OTG overcurrent detection is disabled. In case the OTG polarity of overcurrent is low active, the overcurrent detection is never enabled again and events cannot be reported as expected. Because imx usb overcurrent polarity is low active by default, only detection needs to be enable in usbmisc init function. Signed-off-by: Nicolas Adell <nicolas.adell@actia.fr> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-03-29usb: chipidea: usbmisc: small clean upMichael Trimarchi
The register write can be done outside the if and else condition Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-29usb: chipidea: usbmisc: evdo can be set e/o resetMichael Trimarchi
evdo bit can be set or reset. We can not trust evdo bit status after bootloader stage Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-29usb: chipidea: usbmisc: evdo is only specific to OTG portMichael Trimarchi
The USB_PHY_CTRL_FUNC is used specific for OTG port as described in user manual. EVDO need to be set only for index 0 that correspond to OTG port Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: chipidea: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: chipidea: imx: Do not access CLKONOFF on i.MX51Andrey Smirnov
Unlike i.MX53, i.MX51's USBOH3 register file does not implemenent registers past offset 0x018, which includes MX53_USB_CLKONOFF_CTRL_OFFSET and trying to access that register on said platform results in external abort. Fix it by enabling CLKONOFF accessing codepath only for i.MX53. Cc: stable <stable@vger.kernel.org> Fixes 3be3251db088 ("usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY") Cc: cphealy@gmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-11-14usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHYFabien Lahoudere
The internal 60Mhz clock for host2 and host3 are useless in ULPI phy mode, so we disable it when configuring ULPI PHY node for those host. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-11-14usb: chipidea: imx: configure imx for ULPI phyFabien Lahoudere
In order to use ULPI phy with usb host 2 and 3, we need to configure controller register to enable ULPI features. Each USB controller have different behaviour, so in order to avoid to have several "swicth(data->index)" and lock/unlock, we prefer to get the index switch and then test for features if they exist for this index. This patch also remove useless test of reg and val. Those two values cannot be NULL. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: imx: set over current polarity per dts settingLi Jun
imx usb over current polarity is low active by default, with over-current-active-high property added, user can config it to be high active. Meanwhile keep this setting unchanged for existing platforms so new platform must set the right value for active low by its usbmisc init function if over current is enabled. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2015-11-18usb: chipidea: usbmisc_imx: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. Renaming tmp_dev to of_id (like all others do) in the process. Reported-by: coverity (CID 1324135) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22usb: chipidea: imx: add imx6ul usb supportPeter Chen
Add imx6ul usb support. Signed-off-by: Peter chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22usb: chipidea: imx: add usb support for imx7dPeter Chen
Add imx7d usb support. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@freescale.com>
2015-08-14usb: chipidea: usbmisc_imx: add non-burst setting for imx6Peter Chen
With this setting and AHBBRST at SBUSCFG as "Incremental burst of unspecified length", each non-burst size can be taken as single transfer. It is benefit for non-burst size transfer. Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-06-08usb: chipidea: usbmisc_imx: Remove unneeded semicolonFabio Estevam
Remove unneeded semicolon. The semantic patch that makes this change is available in scripts/coccinelle/misc/semicolon.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-03-26usb: chipidea: usbmisc_imx: fix returnvar.cocci warningskbuild test robot
drivers/usb/chipidea/usbmisc_imx.c:277:5-8: Unneeded variable: "ret". Return "0" on line 297 Removes unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: usbmisc_imx: add imx6sx initialization routinePeter Chen
Except the same process with earlier imx6, it has below two features: - Choose which vbus voltage as vbus wakeup source We choose B_SESSION_VALID as vbus wakeup source since when the system goes to suspend, the vbus comparator can't compare the vbus voltage for VBUS_VALID. - Disable dp/dm (linestate) change as wakeup source at device mode when the vbus is not there, we don't expect dp/dm change waking up usb controller at this situation. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: usbmisc_imx: add .set_wakeup interfacePeter Chen
This API is used to enable/disable usb wakeup, only imx6 series are added, since I don't have other imx hardware on hand. Other imx users can add their API according to reference manual after testing. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: imx: simplify the usbmisc callersPeter Chen
Move struct imx_usbmisc_data NULL pointer judgement from caller to each API, it can simplify the caller. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18usb: chipidea: usbmisc_imx: delete clock informationPeter Chen
All imx usb controller's non core registers uses the same clock gate with core registers, the usbmisc_imx is the library for imx glue driver, the glue keeps clock on when it calls usbmisc_imx API to change non-core register. Besides, we will support runtime pm in the future, it also needs to close this clock when the usb is not in use. Philipp Zabel also verifies it at imx6q platform, see http://www.spinics.net/lists/linux-usb/msg118491.html Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
generated by cgit (git 2.34.1) at 2025-07-15 12:23:40 +0000