summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2025-05-16Merge tag 'sound-6.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A handful small fixes. The only significant change is the fix for MIDI 2.0 UMP handling in ALSA sequencer, but as MIDI 2.0 stuff is still new and rarely used, the impact should be pretty limited. Other than that, quirks for USB-audio and a few cosmetic fixes and changes in drivers that should be safe to apply" * tag 'sound-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add sample rate quirk for Microdia JP001 USB Camera ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2() ALSA: sh: SND_AICA should depend on SH_DMA_API ALSA: usb-audio: Add sample rate quirk for Audioengine D1 ALSA: ump: Fix a typo of snd_ump_stream_msg_device_info ALSA/hda: intel-sdw-acpi: Correct sdw_intel_acpi_scan() function parameter ALSA: seq: Fix delivery of UMP events to group ports
2025-05-11ALSA: ump: Fix a typo of snd_ump_stream_msg_device_infoTakashi Iwai
s/devince/device/ It's used only internally, so no any behavior changes. Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing") Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-05-01usb: gadget: Use get_status callback to set remote wakeup capabilityPrashanth K
Currently when the host sends GET_STATUS request for an interface, we use get_status callbacks to set/clear remote wakeup capability of that interface. And if get_status callback isn't present for that interface, then we assume its remote wakeup capability based on bmAttributes. Now consider a scenario, where we have a USB configuration with multiple interfaces (say ECM + ADB), here ECM is remote wakeup capable and as of now ADB isn't. And bmAttributes will indicate the device as wakeup capable. With the current implementation, when host sends GET_STATUS request for both interfaces, we will set FUNC_RW_CAP for both. This results in USB3 CV Chapter 9.15 (Function Remote Wakeup Test) failures as host expects remote wakeup from both interfaces. The above scenario is just an example, and the failure can be observed if we use configuration with any interface except ECM. Hence avoid configuring remote wakeup capability from composite driver based on bmAttributes, instead use get_status callbacks and let the function drivers decide this. Cc: stable <stable@kernel.org> Fixes: 481c225c4802 ("usb: gadget: Handle function suspend feature selector") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250422103231.1954387-3-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-01usb: gadget: f_ecm: Add get_status callbackPrashanth K
When host sends GET_STATUS to ECM interface, handle the request from the function driver. Since the interface is wakeup capable, set the corresponding bit, and set RW bit if the function is already armed for wakeup by the host. Cc: stable <stable@kernel.org> Fixes: 481c225c4802 ("usb: gadget: Handle function suspend feature selector") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250422103231.1954387-2-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-01usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUNWayne Chang
We identified a bug where the ST_RC bit in the status register was not being acknowledged after clearing the CTRL_RUN bit in the control register. This could lead to unexpected behavior in the USB gadget drivers. This patch resolves the issue by adding the necessary code to explicitly acknowledge ST_RC after clearing CTRL_RUN based on the programming sequence, ensuring proper state transition. Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable <stable@kernel.org> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20250418081228.1194779-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-02Merge tag 'usb-6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1. Included in here are: - Thunderbolt driver and core api updates for new hardware and features - usb-storage const array cleanups - typec driver updates - dwc3 driver updates - xhci driver updates and bugfixes - small USB documentation updates - usb cdns3 driver updates - usb gadget driver updates - other small driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits) thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer thunderbolt: Scan retimers after device router has been enumerated usb: host: cdns3: forward lost power information to xhci usb: host: xhci-plat: allow upper layers to signal power loss usb: xhci: change xhci_resume() parameters to explicit the desired info usb: cdns3-ti: run HW init at resume() if HW was reset usb: cdns3-ti: move reg writes to separate function usb: cdns3: call cdns_power_is_lost() only once in cdns_resume() usb: cdns3: rename hibernated argument of role->resume() to lost_power usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime` usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func usb: dwc3: Don't use %pK through printk usb: core: Don't use %pK through printk usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running usb: xhci: Don't change the status of stalled TDs on failed Stop EP xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint xhci: Handle spurious events on Etron host isoc enpoints ...
2025-03-26Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ...
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-14usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()Chenyuan Yang
The variable d->name, returned by devm_kasprintf(), could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Link: https://lore.kernel.org/r/20250311012705.1233829-1-chenyuan0y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-10Merge v6.14-rc6 into usb-nextGreg Kroah-Hartman
Resolves the merge conflict with: drivers/usb/typec/ucsi/ucsi_acpi.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: gadget: Check bmAttributes only if configuration is validPrashanth K
If the USB configuration is not valid, then avoid checking for bmAttributes to prevent null pointer deference. Cc: stable <stable@kernel.org> Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-20usb: gadget: Fix setting self-powered state on suspendMarek Szyprowski
cdev->config might be NULL, so check it before dereferencing. CC: stable <stable@kernel.org> Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250220120314.3614330-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: gadget: Set self-powered based on MaxPower and bmAttributesPrashanth K
Currently the USB gadget will be set as bus-powered based solely on whether its bMaxPower is greater than 100mA, but this may miss devices that may legitimately draw less than 100mA but still want to report as bus-powered. Similarly during suspend & resume, USB gadget is incorrectly marked as bus/self powered without checking the bmAttributes field. Fix these by configuring the USB gadget as self or bus powered based on bmAttributes, and explicitly set it as bus-powered if it draws more than 100mA. Cc: stable <stable@kernel.org> Fixes: 5e5caf4fa8d3 ("usb: gadget: composite: Inform controller driver of self-powered") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250217120328.2446639-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19usb: gadget: u_ether: Set is_suspend flag if remote wakeup failsPrashanth K
Currently while UDC suspends, u_ether attempts to remote wakeup the host if there are any pending transfers. However, if remote wakeup fails, the UDC remains suspended but the is_suspend flag is not set. And since is_suspend flag isn't set, the subsequent eth_start_xmit() would queue USB requests to suspended UDC. To fix this, bail out from gether_suspend() only if remote wakeup operation is successful. Cc: stable <stable@kernel.org> Fixes: 0a1af6dfa077 ("usb: gadget: f_ecm: Add suspend/resume and remote wakeup support") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250212100840.3812153-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-18usb: gadget: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/all/7239d6211ffb0dff6351d0549d065277f2562793.1738746904.git.namcao@linutronix.de
2025-02-17Merge 6.14-rc3 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: uvc: Fix unstarted kthread workerFrederic Weisbecker
The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14usb: gadget: core: flush gadget workqueue after device removalRoy Luo
device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Roy Luo <royluo@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14USB: gadget: f_midi: f_midi_complete to call queue_workJill Donahue
When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/ Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver") Cc: stable <stable@kernel.org> Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com> Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-12scsi: usb: Rename the RESERVE and RELEASE constantsBart Van Assche
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but also elsewhere in the kernel: $ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]' drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000 drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */ drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */ Additionally, while the names of the symbolic constants RESERVE_10 and RELEASE_10 include the command length, the command length is not included in the RESERVE and RELEASE names. Address both issues by renaming the RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03usb: gadget: f_midi: fix MIDI Streaming descriptor lengthsJohn Keeping
While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it. Cc: stable <stable@kernel.org> Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-03usb: gadget: udc: renesas_usb3: Fix compiler warningGuo Ren
drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe': drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] 2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^ Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/ Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-03usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind ↵Selvarasu Ganesan
retries The current implementation sets the wMaxPacketSize of bulk in/out endpoints to 1024 bytes at the end of the f_midi_bind function. However, in cases where there is a failure in the first midi bind attempt, consider rebinding. This scenario may encounter an f_midi_bind issue due to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024 bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS speed only. Here the term "rebind" in this context refers to attempting to bind the MIDI function a second time in certain scenarios. The situations where rebinding is considered include: * When there is a failure in the first UDC write attempt, which may be caused by other functions bind along with MIDI. * Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to MIDI,ADB. This commit addresses this issue by resetting the wMaxPacketSize before endpoint claim. And here there is no need to reset all values in the usb endpoint descriptor structure, as all members except wMaxPacketSize and bEndpointAddress have predefined values. This ensures that restores the endpoint to its expected configuration, and preventing conflicts with value of ep->maxpacket_limit. It also aligns with the approach used in other function drivers, which treat endpoint descriptors as if they were full speed before endpoint claim. Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation") Cc: stable@vger.kernel.org Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-03usb: gadget: uvc: drop vb2_ops_wait_prepare/finishHans Verkuil
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL") it is no longer needed to set the wait_prepare/finish vb2_ops callbacks as long as the lock field in vb2_queue is set. Since the vb2_ops_wait_prepare/finish callbacks already rely on that field, we can safely drop these callbacks. This simplifies the code and this is a step towards the goal of deleting these callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/2fb746b8-31c4-44e0-bf7b-7a0758edf52a@xs4all.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix ↵Greg Kroah-Hartman
the crash caused by port being null" This reverts commit 13014969cbf07f18d62ceea40bd8ca8ec9d36cec. It is reported to cause crashes on Tegra systems, so revert it for now. Link: https://lore.kernel.org/r/1037c1ad-9230-4181-b9c3-167dbaa47644@nvidia.com Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable <stable@kernel.org> Cc: Lianqin Hu <hulianqin@vivo.com> Link: https://lore.kernel.org/r/2025011711-yippee-fever-a737@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: gadget: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-5-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb: gadget: midi2: Reverse-select at the right placeTakashi Iwai
We should do reverse selection of other components from CONFIG_USB_F_MIDI2 which is tristate, instead of CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle module dependencies. Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Refactor goto check_conditionThinh Nguyen
Move the command initialization before the check_condition to after the goto statement for a cleaner look. No functional change here. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8442364f51f2788d2a191997581a8eda7a143272.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Track BOT command krefThinh Nguyen
Set TARGET_SCF_ACK_KREF flag and allow f_tcm to take the BOT command reference. A usb request may be canceled, the f_tcm knows this. Let it decides if the command should be freed. This is the same as how the UAS interface is done. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e791c639e91b5d91a8787f5d6902e8c58f1dc172.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Requeue command request on errorThinh Nguyen
If there's error on command request, make sure to requeue to receive the next one. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/d4e55c13be8f83f99ee55f7b979a99e2c14fc4c8.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Stall on invalid CBWThinh Nguyen
If the BOT command CBW is invalid, make sure to respond by setting status endpoint STALL until the next proper CBW or reset. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/96022e2d5225f01a20263a4ba9c2e2c8a63328b8.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Check overlapped commandThinh Nguyen
If there's an overlapped command tag, cancel the command and respond with RC_OVERLAPPED_TAG to host. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6bffc2903d0cd1e7c7afca837053a48e883d8903.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Handle TASK_MANAGEMENT commandsThinh Nguyen
Handle target_core_fabric_ops TASK MANAGEMENT functions and their response. If a TASK MANAGEMENT command is received, the driver will interpret the function TMF_*, translate to TMR_*, and fire off a command work executing target_submit_tmr(). On completion, it will handle the TASK MANAGEMENT response through uasp_send_tm_response(). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/50339586e36509dadb9c208b3314530993e673b6.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Send sense on cancelled transferThinh Nguyen
If the transfer is cancelled due to a disconnect or driver tear down (error code -ESHUTDOWN), then just free the command. However, if it got cancelled due to other reasons, then send a sense CHECK CONDITION status with TCM_CHECK_CONDITION_ABORT_CMD status to host notifying the delivery failure. Note that this is separate from TASK MANAGEMENT function abort task command, which will require a separate response IU. See UAS-r04 section 8. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f2ae293c1fc39df4d242a2f724584bf4ec105ece.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Save CPU ID per commandThinh Nguyen
Normally we don't care about the CPU id, but if we ever use TARGET_SCF_USE_CPUID, then we need to save the cpuid. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ab45e37314405d9cdd7a8e3b761c654400bb2270.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Stop proceeding further on -ESHUTDOWNThinh Nguyen
If the error code is -ESHUTDOWN, stop processing the request/command further and prepare for teardown. -ESHUTDOWN is for device reset or disconnection. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/b14410cce6bc7b8a0b43da23a8e0cf1ed1fa8ab6.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Cleanup requests on ep disableThinh Nguyen
There may be different reasons for the transfer to be cancelled. Don't blindly free the command without checking its status. We may still need to properly respond to cancelled command. Check and only free the command on endpoint disable. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6c4ae2b4c2a9037bdcb6f909e173a94b11f04657.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Handle abort commandThinh Nguyen
Implement usbg_aborted_task() to cancel aborted outstanding requests. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6d2a05f120a0384e36b5150b50eec53a0991f400.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Minor cleanup redundant codeThinh Nguyen
The status request preparation is done in uasp_prepare_status(). Remove duplicate code. No functional change here. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/2b2200a9022296f520e26f61ed6aaa6eb34d466f.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Execute command on write completionThinh Nguyen
Don't just wait for the data write completion and execute the target command. We need to verify if the request completed successfully and not just sending invalid data. The verification is done in the write request completion routine. Queue the same work of the command to execute the target_execute_cmd() on data write. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9f6b1c6946cf49eeba0173e405678b9b7786636b.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Return ATA cmd directionThinh Nguyen
Check ATA Pass-Through for direction. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/c22215f7925581684a13eae9a14afb47fb60c061.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Use extra number of commandsThinh Nguyen
To properly respond to host sending more commands than the number of streams the device advertises, the device needs to be able to reject the command with a response. Allocate an extra request to handle 1 more command than the number of streams. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/256f2ec8f5e042ab692d9593144fa75f3d3ce94b.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Handle multiple commands in parallelThinh Nguyen
Resubmit command on completion to fetch more commands and service them in parallel. Increase the number of work in a queue. Each work will be for each command allowing them to be processed concurrently. Also, set them to be unbounded by cpu to improve performance. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/933cf7191b672bf4cfbea4df19af1b08dc1baca9.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Allocate matching number of commands to streamsThinh Nguyen
We can handle multiple commands concurently. Each command services a stream id. At the moment, the driver will handle 32 outstanding streams, which is equivalent to 32 commands. Make sure to allocate a matching number of commands to the number of streams. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/2d806120dcc10c88fef21865b7bc1d2b6604fe42.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Don't set static stream_idThinh Nguyen
Host can assign stream ID value greater than number of streams allocated. The tcm function needs to keep track of which stream is available to assign the stream ID. This patch doesn't track that, but at least it makes sure that there's no Oops if the host send tag with a value greater than the number of supported streams. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/d57b7dfd228199cef811206b1b83ec649f742752.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Get stream by sbitmap numberThinh Nguyen
We prepare same number of sbitmap as the number of streams. Use the returned sbitmap number as index to the selected stream for a usbg_cmd. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/169f67261162c16342bc8543db93c259b05ead0b.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Limit number of sessionsThinh Nguyen
Only allocate up to UASP_SS_EP_COMP_NUM_STREAMS number of session tags. We should not be using more than UASP_SS_EP_COMP_NUM_STREAMS of tags due to the number of commands limit we imposed. Each command uses a unique tag. Any more than that is unnecessary. By limiting it, we can detect an issue in our driver immediately should we run out of session tags. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/017016ffcab2f3c284d863fc42483b83dbd21b35.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Increase bMaxBurstThinh Nguyen
Currently the default bMaxBurst is 0. Set default bMaxBurst to 15 (i.e. 16 bursts) to Data IN and OUT endpoints to improve performance. It should be fine for a controller that supports less than 16 bursts. It should be able to negotiate properly with the host at packet level for the end of burst. If the controller can't handle a burst of 16, and high performance isn't important, the user can use BOT protocol from mass_storage gadget driver instead. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9d6265db4d138e542f281988362bc4392b034d43.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-18 07:09:17 +0000