summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci.c
AgeCommit message (Collapse)Author
2023-03-30xhci: Free the command allocated for setting LPM if we return earlyMathias Nyman
The command allocated to set exit latency LPM values need to be freed in case the command is never queued. This would be the case if there is no change in exit latency values, or device is missing. Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/linux-usb/24263902-c9b3-ce29-237b-1c3d6918f4fe@alu.unizg.hr Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 5c2a380a5aa8 ("xhci: Allocate separate command structures for each LPM command") Cc: <Stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommuD Scott Phillips
Previously the quirk was skipped when no iommu was present. The same rationale for skipping the quirk also applies in the iommu.passthrough=1 case. Skip applying the XHCI_ZERO_64B_REGS quirk if the device's iommu domain is passthrough. Fixes: 12de0a35c996 ("xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers") Cc: stable <stable@kernel.org> Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move xhci MSI sync function to to xhci-pciJosue David Hernandez Gutierrez
Move function to sync MSI from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Call MSI sync function from xhci-pci instead of generic xhci codeJosue David Hernandez Gutierrez
Call function to sync MSI interrupts from pci specific xhci_pci_suspend() function in xhci-pci.c instead of from generic xhci_suspend() [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-14-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move functions to cleanup MSI to xhci-pciJosue David Hernandez Gutierrez
Move function to cleanup MSI from xhci.c to xhci-pci.c This is to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: move PCI specific MSI/MSIX cleanup away from generic xhci functionsJosue David Hernandez Gutierrez
Call the PCI specific MSI/MSIX interrupt freeing code from the xhci-pci callbacks instead of generic xhci code, decoupling PCI parts from generic xhci functions. Adds xhci_pci_stop() that overrides xhci_stop() for PCI xHC controllers. This will free MSIX interrupts a bit later in the hc_driver stop callback, but is still earlier than usb core frees "legacy" interrupts, or interrupts for other hosts. Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move functions to setup msi to xhci-pciJosue David Hernandez Gutierrez
Move functions to setup msi from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, functions are an exact copy [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Avoid PCI MSI/MSIX interrupt reinitialization at resumeJosue David Hernandez Gutierrez
xhci MSI setup is currently done at the same time as xHC host is started in xhci_run(). This couples the generic xhci code with PCI, and will reconfigure MSI/MSIX interrupts every time xHC is started. Decouple MSI/MSIX configuration from generic xhci code by moving MSI/MSIX part to a PCI specific xhci_pci_run() function overriding xhci_run(). This allows us to remove unnecessay MSI/MSIX reconfiguration done every time PCI xhci resumes from suspend. i.e. remove the xhci_cleanup_msix() call from xhci_resume() and the xhci_try_enale_msi() call in xhci_run() called a bit later by xhci_resume() [minor changes and commit message rewrite -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02xhci: add helpers for enabling and disabling interruptersMathias Nyman
Simple helpers to set and clear the IE (interrupter enable) bit for an interrupter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230202150505.618915-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02xhci: Refactor interrupter code for initial multi interrupter support.Mathias Nyman
xHC supports several interrupters, each with its own mmio register set, event ring and MSI/MSI-X vector. Transfers can be assigned different interrupters when queued. See xhci 4.17 for details. Current driver only supports one interrupter. Create a xhci_interrupter structure containing an event ring, pointer to mmio registers for this interrupter, variables to store registers over s3 suspend, erst, etc. Add functions to create and free an interrupter, and pass an interrupter pointer to functions that deal with events. Secondary interrupters are also useful without having an interrupt vector. One use case is the xHCI audio sideband offloading where a DSP can take care of specific audio endpoints. When all transfer events of an offloaded endpoint can be mapped to a separate interrupter event ring the DSP can poll this ring, and we can mask these events preventing waking up the CPU. Only minor functional changes such as clearing some of the interrupter registers when freeing the interrupter. Still create only one primary interrupter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230202150505.618915-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-23Merge 6.2-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add hub_control to xhci_driver_overridesJim Lin
Add a hub_control() callback to the xhci_driver_overrides structure to allow host drivers to override the default hub_control function. This is required for Tegra which requires device specific actions for power management to be executed during USB state transitions. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-2-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman
One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add update_hub_device override for PCI xHCI hostsMathias Nyman
Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Fix null pointer dereference when host diesMathias Nyman
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci: Add quirk to reset host back to default state at shutdownMathias Nyman
Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84ecf1 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: show fault reason for a failed enable slot commandMathias Nyman
Show the completion code of a unsuccessful "enable slot" command. Add it in a human readable form to the existing error message. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: Don't show warning for reinit on known broken suspendMario Limonciello
commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") introduced a new warning message when the host controller error was set and re-initializing. This is expected behavior on some designs which already set `xhci->broken_suspend` so the new warning is alarming to some users. Modify the code to only show the warning if this was a surprising behavior to the XHCI driver. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470 Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") Reported-by: Artem S. Tashkinov <aros@gmx.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05USB: xhci: make xhci_get_endpoint_address staticGreg Kroah-Hartman
This is only called in the xhci.c file, so make the symbol static. Cc: Mathias Nyman <mathias.nyman@intel.com> Link: https://lore.kernel.org/r/20220901134744.2039891-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25Revert "xhci: turn off port power in shutdown"Mathias Nyman
This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25xhci: Add grace period after xHC start to prevent premature runtime suspend.Mathias Nyman
After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-23xhci: turn off port power in shutdownMathias Nyman
If ports are not turned off in shutdown then runtime suspended self-powered USB devices may survive in U3 link state over S5. During subsequent boot, if firmware sends an IPC command to program the port in DISCONNECT state, it will time out, causing significant delay in the boot time. Turning off roothub port power is also recommended in xhci specification 4.19.4 "Port Power" in the additional note. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-23xhci: Keep interrupt disabled in initialization until host is running.Hongyu Xie
irq is disabled in xhci_quiesce(called by xhci_halt, with bit:2 cleared in USBCMD register), but xhci_run(called by usb_add_hcd) re-enable it. It's possible that you will receive thousands of interrupt requests after initialization for 2.0 roothub. And you will get a lot of warning like, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?". This amount of interrupt requests will cause the entire system to freeze. This problem was first found on a device with ASM2142 host controller on it. [tidy up old code while moving it, reword header -Mathias] Cc: stable@kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220623111945.1557702-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10xhci: Fix null pointer dereference in resume if xhci has only one roothubMathias Nyman
In the re-init path xhci_resume() passes 'hcd->primary_hcd' to hci_init(), however this field isn't initialized by __usb_create_hcd() for a HCD without secondary controller. xhci_resume() is called once per xHC device, not per hcd, so the extra checking for primary hcd can be removed. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220610115338.863152-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19xhci: Don't defer primary roothub registration if there is only one roothubMathias Nyman
The support for xHCI controllers with only one roothub, and the code to defer primary roothub registation until second roothub got merged to usb-next for 5.19 at the same time. commit 873f323618c2 ("xhci: prepare for operation w/o shared hcd") commit b7a4f9b5d0e4 ("xhci: Set HCD flag to defer primary roothub registration") These got merged in such a way that the flag to defer primary roothub registration is set even for xHC controllers with just one roothub. Fix this by setting the defer flag in a codepath taken only if we have two roothubs Fixes: 873f323618c2 ("xhci: prepare for operation w/o shared hcd") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220516094850.19788-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: prevent U2 link power state if Intel tier policy prevented U1Mathias Nyman
Don't enable U1 or U2 Link powermanagenet (LPM) states for USB3 devices connected to tier 2 or further hubs. For unknown reasons we previously only prevented U1. Be consistent, and prevent both U1/U2 states if tier policy doesn't allow LPM. Also check the tier policy a bit earlier, and return if U1/U2 is not allowed. This avoids unnecessary xhci MEL commands. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: use generic command timer for stop endpoint commands.Mathias Nyman
The 'stop endpoint' command timer was started when a 'stop endpoint' command was added to the command queue. This can trigger unwanted timeouts if there are several pending commands in the queue that xHC needs to handle first. The generic command timer, which was added later than the 'stop endpoint' timeout timer, times each command currently being handled by xHC hardware. A timed out stop endpoint command was treated as a more severe issue than other failed commands, so the separate stop endpoint timer was left unchanged. Use the generic command timer for stop endpoint commands. Identify if the timed out command was a stop endpoint command in the generic handler, and treat it with the same severity as earlier. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: prepare for operation w/o shared hcdHeiner Kallweit
This patch prepares xhci for the following scenario: - If either of the root hubs has no ports, then omit shared hcd - Main hcd can be USB3 if there are no USB2 ports Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: factor out parts of xhci_gen_setup()Heiner Kallweit
Factoring out parts of xhci_gen_setup() has two motivations: - When adding functionaliy to omit shared hcd if not needed in a subsequent patch, we'll have to call xhci_hcd_init_usb3_data() from two places. - It reduces size of xhci_gen_setup() and makes it better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220511220450.85367-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12xhci: Set HCD flag to defer primary roothub registrationKishon Vijay Abraham I
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd() if xhci has two roothubs. This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). This patch has been added and reverted earier as it triggered a race in usb device enumeration. That race is now fixed in 5.16-rc3, and in stable back to 5.4 commit 6cca13de26ee ("usb: hub: Fix locking issues with address0_mutex") commit 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") [minor rebase change, and commit message update -Mathias] CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220510091630.16564-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-09xhci: stop polling roothubs after shutdownHenry Lin
While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: host: xhci: Remove some unnecessary return value initializationsLinyu Yuan
The ret/retval will be set when it used, no need to init at definition. [modified subject line -Mathias] Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: host: xhci: add blank line in xhci_halt()Linyu Yuan
It is more readable to add blank lines. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03usb: host: xhci: update hci_version operation in xhci_gen_setup()Linyu Yuan
There is no need to store temperary value in hcc_params. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-03xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman
xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe. xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable. Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450. For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later. Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic() Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge 5.17-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here, and it resolves a merge conflict in: drivers/usb/dwc3/dwc3-pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: host: xhci: drop redundant checksSergey Shtylyov
In xhci_endpoint_{disable|reset}() the expression '&vdev->eps[ep_index]' just cannot be NULL, so the checks have no sense at all... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17xhci: Allocate separate command structures for each LPM commandMathias Nyman
Every lpm commmand, both for USB 2 and USB 3 devies used the same xhci->lpm_command structure to change max exit latency. xhci->lpm_command is only protected by a hcd->bandwidth mutex, which is not enoungh as USB 2 and USB 3 devices are behind separate HCDs. Simplify code and avoid unnecessary locking risks by allocating separate command structures for each lpm command, just like with all other commands. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17xhci: dbc: Don't call dbc_tty_init() on every dbc tty probeMathias Nyman
The current workaround to call the dbc_tty_init() in probe is not working in case we have several xhci devices with dbc enabled. dbc_tty_init() should be called only once by a module init call when module is loaded. until dbgtty is its own module call dbc_tty_init() from xhci module init call. Same is true for unloading and dbc_tty_exit() Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exitMathias Nyman
These names give the impression the functions are related to module init calls, but are in fact creating and removing the dbc fake device Rename them to xhci_create_dbc_dev() and xhci_remove_dbc_dev(). We will need the _init and _exit names for actual dbc module init and exit calls. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie
The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: re-initialize the HC during resume if HCE was setPuma Hsu
When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu <pumahsu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21xhci: use max() to make code cleanerChangcheng Deng
Use max() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Link: https://lore.kernel.org/r/20211215091602.445009-1-deng.changcheng@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-10xhci: avoid race between disable slot command and host runtime suspendMathias Nyman
Make xhci_disable_slot() synchronous, thus ensuring it, and xhci_free_dev() calling it return after xHC controller completes the disable slot command. Otherwise the roothub and xHC host may runtime suspend, and clear the command ring while the disable slot command is being processed. This causes a command completion mismatch as the completion event can't be mapped to the correct command. Command ring gets out of sync and commands time out. Driver finally assumes host is unresponsive and bails out. usb 2-4: USB disconnect, device number 10 xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event ... xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:0d.0: HC died; cleaning up Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-10xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspendingKai-Heng Feng
When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05Revert "xhci: Set HCD flag to defer primary roothub registration"Greg Kroah-Hartman
This reverts commit b7a0a792f864583207c593b50fd1b752ed89f4c1. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-11xhci: guard accesses to ep_state in xhci_endpoint_reset()Jonathan Bell
See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14xhci: Set HCD flag to defer primary roothub registrationKishon Vijay Abraham I
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26xhci: Add bus number to some debug messagesMathias Nyman
As we register two usb buses for each xHC, and systems with several hosts are more and more common it is getting hard to follow the flow of debug messages without knowing which bus they belong to Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210820123503.2605901-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST ↵Mathias Nyman
quirk set" This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760. That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints. Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2 After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval. Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm. exit latency calculations have been revised since then Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-15 22:47:14 +0000