| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
|
|
Some file systems (e.g. ext4) may reuse inode numbers once the inode is
not in use anymore. Usually hostfs will keep an FD open for each inode,
but this is not always the case. In the case of sockets, this cannot
even be done properly.
As such, the following sequence of events was possible:
* application creates and deletes a socket
* hostfs creates/deletes the socket on the host
* inode is still in the hostfs cache
* hostfs creates a new file
* ext4 on the outside reuses the inode number
* hostfs finds the socket inode for the newly created file
* application receives -ENXIO when opening the file
As mentioned, this can only happen if the deleted file is a special file
that is never opened on the host (i.e. no .open fop).
As such, to prevent issues, it is sufficient to check that the inode
has the expected type. That said, also add a check for the inode birth
time, just to be on the safe side.
Fixes: 74ce793bcbde ("hostfs: Fix ephemeral inodes")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Mickaël Salaün <mic@digikod.net>
Link: https://patch.msgid.link/20250214092822.1241575-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After handling a mkdir, get the inode for the name and use
d_splice_alias() to store the correct dentry in the dcache.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-3-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some filesystems, such as NFS, cifs, ceph, and fuse, do not have
complete control of sequencing on the actual filesystem (e.g. on a
different server) and may find that the inode created for a mkdir
request already exists in the icache and dcache by the time the mkdir
request returns. For example, if the filesystem is mounted twice the
directory could be visible on the other mount before it is on the
original mount, and a pair of name_to_handle_at(), open_by_handle_at()
calls could instantiate the directory inode with an IS_ROOT() dentry
before the first mkdir returns.
This means that the dentry passed to ->mkdir() may not be the one that
is associated with the inode after the ->mkdir() completes. Some
callers need to interact with the inode after the ->mkdir completes and
they currently need to perform a lookup in the (rare) case that the
dentry is no longer hashed.
This lookup-after-mkdir requires that the directory remains locked to
avoid races. Planned future patches to lock the dentry rather than the
directory will mean that this lookup cannot be performed atomically with
the mkdir.
To remove this barrier, this patch changes ->mkdir to return the
resulting dentry if it is different from the one passed in.
Possible returns are:
NULL - the directory was created and no other dentry was used
ERR_PTR() - an error occurred
non-NULL - this other dentry was spliced in
This patch only changes file-systems to return "ERR_PTR(err)" instead of
"err" or equivalent transformations. Subsequent patches will make
further changes to some file-systems to return a correct dentry.
Not all filesystems reliably result in a positive hashed dentry:
- NFS, cifs, hostfs will sometimes need to perform a lookup of
the name to get inode information. Races could result in this
returning something different. Note that this lookup is
non-atomic which is what we are trying to avoid. Placing the
lookup in filesystem code means it only happens when the filesystem
has no other option.
- kernfs and tracefs leave the dentry negative and the ->revalidate
operation ensures that lookup will be called to correctly populate
the dentry. This could be fixed but I don't think it is important
to any of the users of vfs_mkdir() which look at the dentry.
The recommendation to use
d_drop();d_splice_alias()
is ugly but fits with current practice. A planned future patch will
change this.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull hostfs fix from Al Viro:
"Fix hostfs __dentry_name() string handling.
The use of strcpy() with overlapping source and destination is a UB;
original loop hadn't been. More to the point, the whole thing is much
easier done with memcpy() + memmove()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
hostfs: fix string handling in __dentry_name()
|
|
strcpy() should not be used with destination potentially overlapping
the source; what's more, strscpy() in there is pointless - we already
know the amount we want to copy; might as well use memcpy().
Fixes: c278e81b8a02 "hostfs: Remove open coded strcpy()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If we add a migrate_folio operation, we can convert the writepage
operation to writepages. The large folio support here is illusory;
we would need to kmap each page in turn for proper support. But we do
remove a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20241220051500.1919389-1-willy@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The __filemap_get_folio() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: 1da86618bdce ("fs: Convert aops->write_begin to take a folio")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This parameter is UML specific and is unknown to kernel. It should not
be propagated to kernel, otherwise it will be passed to user space as
an environment option by kernel with a warning like:
Unknown kernel command line parameters "hostfs=/foo", will be passed to user space.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241011040441.1586345-7-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the passed page to a folio and operate on that.
Replaces four calls to compound_head() with one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
|
|
hostfs not keep the host directory when mounting. When the host
directory is none (default), fc->source is used as the host root
directory, and this is wrong. Here we use `parse_monolithic` to
handle the old mount path for parsing the root directory. For new
mount path, The `parse_param` is used for the host directory parse.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: cd140ce9f611 ("hostfs: convert hostfs to use the new mount API")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240725065130.1821964-1-lihongbo22@huawei.com
[brauner: minor fixes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
Commit e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.
Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.
But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).
So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
|
|
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/hostfs/hostfs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-fs-hostfs-v1-1-fd2b565027e7@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
dev_t is a kernel type and may have different definitions
in kernel and userspace. On 32-bit x86 this currently makes
the stat structure being 4 bytes longer in the user code,
causing stack corruption.
However, this is (potentially) not the only problem, since
dev_t is a different type on user/kernel side, so we don't
know that the major/minor encoding isn't also different.
Decode/encode it instead to address both problems.
Cc: stable@vger.kernel.org
Fixes: 74ce793bcbde ("hostfs: Fix ephemeral inodes")
Link: https://patch.msgid.link/20240702092440.acc960585dd5.Id0767e12f562a69c6cd3c3262dc3d765db350cf6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the recent conversion to the new mount API, there is a warning
when building hostfs (which may be upgraded to an error via
CONFIG_WERROR=y):
fs/hostfs/hostfs_kern.c: In function 'hostfs_fill_super':
fs/hostfs/hostfs_kern.c:942:27: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
942 | char *host_root = fc->source;
| ^~
Add the 'const' qualifier, as host_root will not be modified after its
assignment. Move the assignment to keep the existing reverse Christmas
tree order intact.
Fixes: cd140ce9f611 ("hostfs: convert hostfs to use the new mount API")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240611-hostfs-fix-mount-api-conversion-v1-1-ef75bbc77f44@kernel.org
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the hostfs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240530120111.3794664-1-lihongbo22@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the use of page APIs, including setting/clearing the error flag
which is never checked on hostfs folios. This does not include support
for large folios as kmap_local_folio() maps only one page at a time.
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-8-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-41-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-48-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Add support for Landlock to UML.
To do this, this fixes the way hostfs manages inodes according to the
underlying filesystem [1]. They are now properly handled as for other
filesystems, which enables Landlock support (and probably other
features).
This also extends Landlock's tests with 6 pseudo filesystems,
including hostfs"
[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/
* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add hostfs tests
selftests/landlock: Add tests for pseudo filesystems
selftests/landlock: Make mounts configurable
selftests/landlock: Add supports_filesystem() helper
selftests/landlock: Don't create useless file layouts
hostfs: Fix ephemeral inodes
|
|
hostfs creates a new inode for each opened or created file, which
created useless inode allocations and forbade identifying a host file
with a kernel inode.
Fix this uncommon filesystem behavior by tying kernel inodes to host
file's inode and device IDs. Even if the host filesystem inodes may be
recycled, this cannot happen while a file referencing it is opened,
which is the case with hostfs. It should be noted that hostfs inode IDs
may not be unique for the same hostfs superblock because multiple host's
(backed) superblocks may be used.
Delete inodes when dropping them to force backed host's file descriptors
closing.
This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes
Landlock fully supported by UML. This is very useful for testing
changes.
These changes also factor out and simplify some helpers thanks to the
new hostfs_inode_update() and the hostfs_iget() revamp: read_name(),
hostfs_create(), hostfs_lookup(), hostfs_mknod(), and
hostfs_fill_sb_common().
A following commit with new Landlock tests check this new hostfs inode
consistency.
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of exporting the set of functions provided by
glibc that are needed for hostfs_user.c, just build that
into the kernel image whenever hostfs is built, and then
export _those_ functions cleanly, to be independent of
the libc implementation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Add support for rust (yay!)
- Add support for LTO
- Add platform bus support to virtio-pci
- Various virtio fixes
- Coding style, spelling cleanups
* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
Documentation: rust: Fix arch support table
uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
um: virt-pci: properly remove PCI device from bus
um: virtio_uml: move device breaking into workqueue
um: virtio_uml: mark device as unregistered when breaking it
um: virtio_uml: free command if adding to virtqueue failed
UML: define RUNTIME_DISCARD_EXIT
virt-pci: add platform bus support
um-virt-pci: Make max delay configurable
um: virt-pci: implement pcibios_get_phb_of_node()
um: Support LTO
um: put power options in a menu
um: Use CFLAGS_vmlinux
um: Prevent building modules incompatible with MODVERSIONS
um: Avoid pcap multiple definition errors
um: Make the definition of cpu_data more compatible
x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
rust: arch/um: Disable FP/SIMD instruction to match x86
rust: arch/um: Use 'pie' relocation mode under UML
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
|
|
I added $(srctree)/ to some included Makefiles in the following commits:
- 3204a7fb98a3 ("kbuild: prefix $(srctree)/ to some included Makefiles")
- d82856395505 ("kbuild: do not require sub-make for separate output tree builds")
They were a preparation for removing --include-dir flag.
I have never thought --include-dir useful. Rather, it _is_ harmful.
For example, run the following commands:
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
HOSTCC scripts/basic/fixdep
Error: kernelrelease not valid - run 'make prepare' to update it
UPD include/config/kernel.release
make[1]: Leaving directory '/tmp/linux/foo'
The first command configures the source tree for x86. The next command
tries to build ARM device trees in the separate foo/ directory - this
must stop because the directory foo/ has not been configured yet.
However, due to --include-dir=$(abs_srctree), the top Makefile includes
the wrong include/config/auto.conf from the source tree and continues
building. Kbuild traverses the directory tree, but of course it does
not work correctly. The Error message is also pointless - 'make prepare'
does not help at all for fixing the issue.
This commit fixes more arch Makefile, and finally removes --include-dir
from the top Makefile.
There are more breakages under drivers/, but I do not volunteer to fix
them all. I just moved --include-dir to drivers/Makefile.
With this commit, the second command will stop with a sensible message.
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
SYNC include/config/auto.conf.cmd
***
*** The source tree is not clean, please run 'make ARCH=arm mrproper'
*** in /tmp/linux
***
make[2]: *** [../Makefile:646: outputmakefile] Error 1
/tmp/linux/Makefile:770: include/config/auto.conf.cmd: No such file or directory
make[1]: *** [/tmp/linux/Makefile:793: include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/tmp/linux/foo'
make: *** [Makefile:226: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The use of kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Therefore, replace kmap() with kmap_local_page() in hostfs_kern.c, it
being the only file with kmap() call sites currently left in fs/hostfs.
Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If a page can't be written back, we need to call mapping_set_error(),
not clear the page's Uptodate flag. Also remove the clearing of PageError
on success; that flag is used for read errors, not write errors.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
|
|
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Hostfs was not setting up the backing device information, which means it
uses the noop bdi. The noop bdi does not have the writeback capability
enabled, which in turns means dirty pages never got written back to
storage.
In other words programs using mmap to write to files on hostfs never
actually got their data written out...
Fix this by simply setting up the bdi with default settings as all the
required code for writeback is already in place.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Ritesh Raj Sarraf <ritesh@collabora.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
There's really no good reason not to, and e.g. trace-cmd
currently requires it for the temporary per-CPU files.
Hook up splice_write just like everyone else does.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
