| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
|
|
There is an issue in the kernel:
In tmpfs, when using the "ls" command to list the contents
of a directory with a large number of files, glibc performs
the getdents call in multiple rounds. If a concurrent unlink
occurs between these getdents calls, it may lead to duplicate
directory entries in the ls output. One possible reproduction
scenario is as follows:
Create 1026 files and execute ls and rm concurrently:
for i in {1..1026}; do
echo "This is file $i" > /tmp/dir/file$i
done
ls /tmp/dir rm /tmp/dir/file4
->getdents(file1026-file5)
->unlink(file4)
->getdents(file5,file3,file2,file1)
It is expected that the second getdents call to return file3
through file1, but instead it returns an extra file5.
The root cause of this problem is in the offset_dir_lookup
function. It uses mas_find to determine the starting position
for the current getdents call. Since mas_find locates the first
position that is greater than or equal to mas->index, when file4
is deleted, it ends up returning file5.
It can be fixed by replacing mas_find with mas_find_rev, which
finds the first position that is less than or equal to mas->index.
Fixes: b9b588f22a0c ("libfs: Use d_children list to iterate simple_offset directories")
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Link: https://lore.kernel.org/r/20250320034417.555810-1-sunyongjian@huaweicloud.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Record the exit code and cgroupid in release_task() and stash in struct
pidfs_exit_info so it can be retrieved even after the task has been
reaped.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-5-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
|
|
... and check the "name might be unstable" predicate
the right way.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs libfs updates from Christian Brauner:
"This improves the stable directory offset behavior in various ways.
Stable offsets are needed so that NFS can reliably read directories on
filesystems such as tmpfs:
- Improve the end-of-directory detection
According to getdents(3), the d_off field in each returned
directory entry points to the next entry in the directory. The
d_off field in the last returned entry in the readdir buffer must
contain a valid offset value, but if it points to an actual
directory entry, then readdir/getdents can loop.
Introduce a specific fixed offset value that is placed in the d_off
field of the last entry in a directory. Some user space
applications assume that the EOD offset value is larger than the
offsets of real directory entries, so the largest valid offset
value is reserved for this purpose. This new value is never
allocated by simple_offset_add().
When ->iterate_dir() returns, getdents{64} inserts the ctx->pos
value into the d_off field of the last valid entry in the readdir
buffer. When it hits EOD, offset_readdir() sets ctx->pos to the EOD
offset value so the last entry is updated to point to the EOD
marker.
When trying to read the entry at the EOD offset, offset_readdir()
terminates immediately.
- Rely on d_children to iterate stable offset directories
Instead of using the mtree to emit entries in the order of their
offset values, use it only to map incoming ctx->pos to a starting
entry. Then use the directory's d_children list, which is already
maintained properly by the dcache, to find the next child to emit.
- Narrow the range of directory offset values returned by
simple_offset_add() to 3 .. (S32_MAX - 1) on all platforms. This
means the allocation behavior is identical on 32-bit systems,
64-bit systems, and 32-bit user space on 64-bit kernels. The new
range still permits over 2 billion concurrent entries per
directory.
- Return ENOSPC when the directory offset range is exhausted. Hitting
this error is almost impossible though.
- Remove the simple_offset_empty() helper"
* tag 'vfs-6.14-rc1.libfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: Use d_children list to iterate simple_offset directories
libfs: Replace simple_offset end-of-directory detection
Revert "libfs: fix infinite directory reads for offset dir"
Revert "libfs: Add simple_offset_empty()"
libfs: Return ENOSPC when the directory offset range is exhausted
|
|
The mtree mechanism has been effective at creating directory offsets
that are stable over multiple opendir instances. However, it has not
been able to handle the subtleties of renames that are concurrent
with readdir.
Instead of using the mtree to emit entries in the order of their
offset values, use it only to map incoming ctx->pos to a starting
entry. Then use the directory's d_children list, which is already
maintained properly by the dcache, to find the next child to emit.
One of the sneaky things about this is that when the mtree-allocated
offset value wraps (which is very rare), looking up ctx->pos++ is
not going to find the next entry; it will return NULL. Instead, by
following the d_children list, the offset values can appear in any
order but all of the entries in the directory will be visited
eventually.
Note also that the readdir() is guaranteed to reach the tail of this
list. Entries are added only at the head of d_children, and readdir
walks from its current position in that list towards its tail.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-6-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
According to getdents(3), the d_off field in each returned directory
entry points to the next entry in the directory. The d_off field in
the last returned entry in the readdir buffer must contain a valid
offset value, but if it points to an actual directory entry, then
readdir/getdents can loop.
This patch introduces a specific fixed offset value that is placed
in the d_off field of the last entry in a directory. Some user space
applications assume that the EOD offset value is larger than the
offsets of real directory entries, so the largest valid offset value
is reserved for this purpose. This new value is never allocated by
simple_offset_add().
When ->iterate_dir() returns, getdents{64} inserts the ctx->pos
value into the d_off field of the last valid entry in the readdir
buffer. When it hits EOD, offset_readdir() sets ctx->pos to the EOD
offset value so the last entry is updated to point to the EOD marker.
When trying to read the entry at the EOD offset, offset_readdir()
terminates immediately.
It is worth noting that using a Maple tree for directory offset
value allocation does not guarantee a 63-bit range of values --
on platforms where "long" is a 32-bit type, the directory offset
value range is still 0..(2^31 - 1). For broad compatibility with
32-bit user space, the largest tmpfs directory cookie value is now
S32_MAX.
Fixes: 796432efab1e ("libfs: getdents() should return 0 after reaching EOD")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-5-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90
("libfs: fix infinite directory reads for offset dir"), if a
directory's offset allocator wraps, existing entries are no longer
visible via readdir/getdents because offset_readdir() stops listing
entries once an entry's offset is larger than octx->next_offset.
These entries vanish persistently -- they can be looked up, but will
never again appear in readdir(3) output.
The reason for this is that the commit treats directory offsets as
monotonically increasing integer values rather than opaque cookies,
and introduces this comparison:
if (dentry2offset(dentry) >= last_index) {
On 64-bit platforms, the directory offset value upper bound is
2^63 - 1. Directory offsets will monotonically increase for millions
of years without wrapping.
On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator
can wrap after only a few weeks (at worst).
Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for
offset dir") to prepare for a fix that can work properly on 32-bit
systems and might apply to recent LTS kernels where shmem employs
the simple_offset mechanism.
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-4-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
simple_empty() and simple_offset_empty() perform the same task.
The latter's use as a canary to find bugs has not found any new
issues. A subsequent patch will remove the use of the mtree for
iterating directory contents, so revert back to using a similar
mechanism for determining whether a directory is indeed empty.
Only one such mechanism is ever needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Testing shows that the EBUSY error return from mtree_alloc_cyclic()
leaks into user space. The ERRORS section of "man creat(2)" says:
> EBUSY O_EXCL was specified in flags and pathname refers
> to a block device that is in use by the system
> (e.g., it is mounted).
ENOSPC is closer to what applications expect in this situation.
Note that the normal range of simple directory offset values is
2..2^63, so hitting this error is going to be rare to impossible.
Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets")
Cc: stable@vger.kernel.org # v6.9+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pseudo-filesystems might reasonably wish to implement the export ops
(particularly for name_to_handle_at/open_by_handle_at); plumb this
through pseudo_fs_context
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Erin Shepherd <erin.shepherd@e43.eu>
Link: https://lore.kernel.org/r/20241113-pidfs_fh-v2-1-9a4d28155a37@e43.eu
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-1-87d803a42495@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull statx updates from Al Viro:
"Sanitize struct filename and lookup flags handling in statx and
friends"
* tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: kill empty_dir_getattr()
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
fs/stat.c: switch to CLASS(fd_raw)
kill getname_statx_lookup_flags()
io_statx_prep(): use getname_uflags()
|
|
It's used only to initialize ->getattr in one inode_operations instance
(empty_dir_inode_operations) and its behaviour had always been equivalent
to what we get with NULL ->getattr.
Just remove that initializer, along with empty_dir_getattr() itself.
While we are at it, the same instance has ->permission initialized to
generic_permission, which is what NULL ->permission ends up doing.
Again, no point keeping it.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Enable casefold lookup in tmpfs, based on the encoding defined by
userspace. That means that instead of comparing byte per byte a file
name, it compares to a case-insensitive equivalent of the Unicode
string.
* Dcache handling
There's a special need when dealing with case-insensitive dentries.
First of all, we currently invalidated every negative casefold dentries.
That happens because currently VFS code has no proper support to deal
with that, giving that it could incorrectly reuse a previous filename
for a new file that has a casefold match. For instance, this could
happen:
$ mkdir DIR
$ rm -r DIR
$ mkdir dir
$ ls
DIR/
And would be perceived as inconsistency from userspace point of view,
because even that we match files in a case-insensitive manner, we still
honor whatever is the initial filename.
Along with that, tmpfs stores only the first equivalent name dentry used
in the dcache, preventing duplications of dentries in the dcache. The
d_compare() version for casefold files uses a normalized string, so the
filename under lookup will be compared to another normalized string for
the existing file, achieving a casefolded lookup.
* Enabling casefold via mount options
Most filesystems have their data stored in disk, so casefold option need
to be enabled when building a filesystem on a device (via mkfs).
However, as tmpfs is a RAM backed filesystem, there's no disk
information and thus no mkfs to store information about casefold.
For tmpfs, create casefold options for mounting. Userspace can then
enable casefold support for a mount point using:
$ mount -t tmpfs -o casefold=utf8-12.1.0 fs_name mount_dir/
Userspace must set what Unicode standard is aiming to. The available
options depends on what the kernel Unicode subsystem supports.
And for strict encoding:
$ mount -t tmpfs -o casefold=utf8-12.1.0,strict_encoding fs_name mount_dir/
Strict encoding means that tmpfs will refuse to create invalid UTF-8
sequences. When this option is not enabled, any invalid sequence will be
treated as an opaque byte sequence, ignoring the encoding thus not being
able to be looked up in a case-insensitive way.
* Check for casefold dirs on simple_lookup()
On simple_lookup(), do not create dentries for casefold directories.
Currently, VFS does not support case-insensitive negative dentries and
can create inconsistencies in the filesystem. Prevent such dentries to
being created in the first place.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-6-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export generic_ci_ dentry functions so they can be used by
case-insensitive filesystems that need something more custom than the
default one set by `struct generic_ci_dentry_ops`.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-5-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
get_stashed_dentry() tries to optimistically retrieve a stashed dentry
from a provided location. It needs to ensure to hold rcu lock before it
dereference the stashed location to prevent UAF issues. Use
rcu_dereference() instead of READ_ONCE() it's effectively equivalent
with some lockdep bells and whistles and it communicates clearly that
this expects rcu protection.
Link: https://lore.kernel.org/r/20240906-vfs-hotfix-5959800ffa68@brauner
Fixes: 07fd7c329839 ("libfs: add path_from_stashed()")
Reported-by: syzbot+f82b36bffae7ef78b6a7@syzkaller.appspotmail.com
Fixes: syzbot+f82b36bffae7ef78b6a7@syzkaller.appspotmail.com
Reported-by: syzbot+cbe4b96e1194b0e34db6@syzkaller.appspotmail.com
Fixes: syzbot+cbe4b96e1194b0e34db6@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
According to bpftrace on these routines most calls result in cmpxchg,
which already provides the same guarantee.
In inode_maybe_inc_iversion elision is possible because even if the
wrong value was read due to now missing smp_mb fence, the issue is going
to correct itself after cmpxchg. If it appears cmpxchg wont be issued,
the fence + reload are there bringing back previous behavior.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240815083310.3865-1-mjguzik@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After we switch tmpfs dir operations from simple_dir_operations to
simple_offset_dir_operations, every rename happened will fill new dentry
to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free
key starting with octx->newx_offset, and then set newx_offset equals to
free key + 1. This will lead to infinite readdir combine with rename
happened at the same time, which fail generic/736 in xfstests(detail show
as below).
1. create 5000 files(1 2 3...) under one dir
2. call readdir(man 3 readdir) once, and get one entry
3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry)
4. loop 2~3, until readdir return nothing or we loop too many
times(tmpfs break test with the second condition)
We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite
directory reads") to fix it, record the last_index when we open dir, and
do not emit the entry which index >= last_index. The file->private_data
now used in offset dir can use directly to do this, and we also update
the last_index when we llseek the dir file.
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240731043835.1828697-1-yangerkun@huawei.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
[brauner: only update last_index after seek when offset is zero like Jan suggested]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
generic_ci_match can be used by case-insensitive filesystems to compare
strings under lookup with dirents in a case-insensitive way. This
function is currently reimplemented by each filesystem supporting
casefolding, so this reduces code duplication in filesystem-specific
code.
[eugen.hristev@collabora.com: rework to first test the exact match, cleanup
and add error message]
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20240606073353.47130-4-eugen.hristev@collabora.com
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When renaming onto an existing directory entry, user space expects
the replacement entry to have the same directory offset as the
original one.
Link: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15966
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-4-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I'm about to fix a tmpfs rename bug that requires the use of
internal simple_offset helpers that are not available in mm/shmem.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-3-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
User space expects the replacement (old) directory entry to have
the same directory offset after the rename.
Suggested-by: Christian Brauner <brauner@kernel.org>
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.
For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.
If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.
Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.
Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.
Tested on both 32 and 64bit including error injection.
Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pdfd updates from Christian Brauner:
- Until now pidfds could only be created for thread-group leaders but
not for threads. There was no technical reason for this. We simply
had no users that needed support for this. Now we do have users that
need support for this.
This introduces a new PIDFD_THREAD flag for pidfd_open(). If that
flag is set pidfd_open() creates a pidfd that refers to a specific
thread.
In addition, we now allow clone() and clone3() to be called with
CLONE_PIDFD | CLONE_THREAD which wasn't possible before.
A pidfd that refers to an individual thread differs from a pidfd that
refers to a thread-group leader:
(1) Pidfds are pollable. A task may poll a pidfd and get notified
when the task has exited.
For thread-group leader pidfds the polling task is woken if the
thread-group is empty. In other words, if the thread-group
leader task exits when there are still threads alive in its
thread-group the polling task will not be woken when the
thread-group leader exits but rather when the last thread in the
thread-group exits.
For thread-specific pidfds the polling task is woken if the
thread exits.
(2) Passing a thread-group leader pidfd to pidfd_send_signal() will
generate thread-group directed signals like kill(2) does.
Passing a thread-specific pidfd to pidfd_send_signal() will
generate thread-specific signals like tgkill(2) does.
The default scope of the signal is thus determined by the type
of the pidfd.
Since use-cases exist where the default scope of the provided
pidfd needs to be overriden the following flags are added to
pidfd_send_signal():
- PIDFD_SIGNAL_THREAD
Send a thread-specific signal.
- PIDFD_SIGNAL_THREAD_GROUP
Send a thread-group directed signal.
- PIDFD_SIGNAL_PROCESS_GROUP
Send a process-group directed signal.
The scope change will only work if the struct pid is actually
used for this scope.
For example, in order to send a thread-group directed signal the
provided pidfd must be used as a thread-group leader and
similarly for PIDFD_SIGNAL_PROCESS_GROUP the struct pid must be
used as a process group leader.
- Move pidfds from the anonymous inode infrastructure to a tiny pseudo
filesystem. This will unblock further work that we weren't able to do
simply because of the very justified limitations of anonymous inodes.
Moving pidfds to a tiny pseudo filesystem allows for statx on pidfds
to become useful for the first time. They can now be compared by
inode number which are unique for the system lifetime.
Instead of stashing struct pid in file->private_data we can now stash
it in inode->i_private. This makes it possible to introduce concepts
that operate on a process once all file descriptors have been closed.
A concrete example is kill-on-last-close. Another side-effect is that
file->private_data is now freed up for per-file options for pidfds.
Now, each struct pid will refer to a different inode but the same
struct pid will refer to the same inode if it's opened multiple
times. In contrast to now where each struct pid refers to the same
inode.
The tiny pseudo filesystem is not visible anywhere in userspace
exactly like e.g., pipefs and sockfs. There's no lookup, there's no
complex inode operations, nothing. Dentries and inodes are always
deleted when the last pidfd is closed.
We allocate a new inode and dentry for each struct pid and we reuse
that inode and dentry for all pidfds that refer to the same struct
pid. The code is entirely optional and fairly small. If it's not
selected we fallback to anonymous inodes. Heavily inspired by nsfs.
The dentry and inode allocation mechanism is moved into generic
infrastructure that is now shared between nsfs and pidfs. The
path_from_stashed() helper must be provided with a stashing location,
an inode number, a mount, and the private data that is supposed to be
used and it will provide a path that can be passed to dentry_open().
The helper will try retrieve an existing dentry from the provided
stashing location. If a valid dentry is found it is reused. If not a
new one is allocated and we try to stash it in the provided location.
If this fails we retry until we either find an existing dentry or the
newly allocated dentry could be stashed. Subsequent openers of the
same namespace or task are then able to reuse it.
- Currently it is only possible to get notified when a task has exited,
i.e., become a zombie and userspace gets notified with EPOLLIN. We
now also support waiting until the task has been reaped, notifying
userspace with EPOLLHUP.
- Ensure that ESRCH is reported for getfd if a task is exiting instead
of the confusing EBADF.
- Various smaller cleanups to pidfd functions.
* tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
libfs: improve path_from_stashed()
libfs: add stashed_dentry_prune()
libfs: improve path_from_stashed() helper
pidfs: convert to path_from_stashed() helper
nsfs: convert to path_from_stashed() helper
libfs: add path_from_stashed()
pidfd: add pidfs
pidfd: move struct pidfd_fops
pidfd: allow to override signal scope in pidfd_send_signal()
pidfd: change pidfd_send_signal() to respect PIDFD_THREAD
signal: fill in si_code in prepare_kill_siginfo()
selftests: add ESRCH tests for pidfd_getfd()
pidfd: getfd should always report ESRCH if a task is exiting
pidfd: clone: allow CLONE_THREAD | CLONE_PIDFD together
pidfd: exit: kill the no longer used thread_group_exited()
pidfd: change do_notify_pidfd() to use __wake_up(poll_to_key(EPOLLIN))
pid: kill the obsolete PIDTYPE_PID code in transfer_pid()
pidfd: kill the no longer needed do_notify_pidfd() in de_thread()
pidfd_poll: report POLLHUP when pid_task() == NULL
pidfd: implement PIDFD_THREAD flag for pidfd_open()
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode into vfs.misc
Merge case-insensitive updates from Gabriel Krisman Bertazi:
- Patch case-insensitive lookup by trying the case-exact comparison
first, before falling back to costly utf8 casefolded comparison.
- Fix to forbid using a case-insensitive directory as part of an
overlayfs mount.
- Patchset to ensure d_op are set at d_alloc time for fscrypt and
casefold volumes, ensuring filesystem dentries will all have the
correct ops, whether they come from a lookup or not.
* tag 'for-next-6.9' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Right now we pass a bunch of info that is fs specific which doesn't make
a lot of sense and it bleeds fs sepcific details into the generic
helper. nsfs and pidfs have slightly different needs when initializing
inodes. Add simple operations that are stashed in sb->s_fs_info that
both can implement. This also allows us to get rid of cleaning up
references in the caller. All in all path_from_stashed() becomes way
simpler.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both pidfs and nsfs use a memory location to stash a dentry for reuse by
concurrent openers. Right now two custom
dentry->d_prune::{ns,pidfs}_prune_dentry() methods are needed that do
the same thing. The only thing that differs is that they need to get to
the memory location to store or retrieve the dentry from differently.
Fix that by remember the stashing location for the dentry in
dentry->d_fsdata which allows us to retrieve it in dentry->d_prune. That
in turn makes it possible to add a common helper that pidfs and nsfs can
both use.
Link: https://lore.kernel.org/r/CAHk-=wg8cHY=i3m6RnXQ2Y2W8psicKWQEZq1=94ivUiviM-0OA@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In earlier patches we moved both nsfs and pidfs to path_from_stashed().
The helper currently tries to add and stash a new dentry if a reusable
dentry couldn't be found and returns EAGAIN if it lost the race to stash
the dentry. The caller can use EAGAIN to retry.
The helper and the two filesystems be written in a way that makes
returning EAGAIN unnecessary. To do this we need to change the
dentry->d_prune() implementation of nsfs and pidfs to not simply replace
the stashed dentry with NULL but to use a cmpxchg() and only replace
their own dentry.
Then path_from_stashed() can then be changed to not just stash a new
dentry when no dentry is currently stashed but also when an already dead
dentry is stashed. If another task managed to install a dentry in the
meantime it can simply be reused. Pack that into a loop and call it a
day.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgtLF5Z5=15-LKAczWm=-tUjHO+Bpf7WjBG+UU3s=fEQw@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Moving pidfds from the anonymous inode infrastructure to a separate tiny
in-kernel filesystem similar to sockfs, pipefs, and anon_inodefs causes
selinux denials and thus various userspace components that make heavy
use of pidfds to fail as pidfds used anon_inode_getfile() which aren't
subject to any LSM hooks. But dentry_open() is and that would cause
regressions.
The failures that are seen are selinux denials. But the core failure is
dbus-broker. That cascades into other services failing that depend on
dbus-broker. For example, when dbus-broker fails to start polkit and all
the others won't be able to work because they depend on dbus-broker.
The reason for dbus-broker failing is because it doesn't handle failures
for SO_PEERPIDFD correctly. Last kernel release we introduced
SO_PEERPIDFD (and SCM_PIDFD). SO_PEERPIDFD allows dbus-broker and polkit
and others to receive a pidfd for the peer of an AF_UNIX socket. This is
the first time in the history of Linux that we can safely authenticate
clients in a race-free manner.
dbus-broker immediately made use of this but messed up the error
checking. It only allowed EINVAL as a valid failure for SO_PEERPIDFD.
That's obviously problematic not just because of LSM denials but because
of seccomp denials that would prevent SO_PEERPIDFD from working; or any
other new error code from there.
So this is catching a flawed implementation in dbus-broker as well. It
has to fallback to the old pid-based authentication when SO_PEERPIDFD
doesn't work no matter the reasons otherwise it'll always risk such
failures. So overall that LSM denial should not have caused dbus-broker
to fail. It can never assume that a feature released one kernel ago like
SO_PEERPIDFD can be assumed to be available.
So, the next fix separate from the selinux policy update is to try and
fix dbus-broker at [3]. That should make it into Fedora as well. In
addition the selinux reference policy should also be updated. See [4]
for that. If Selinux is in enforcing mode in userspace and it encounters
anything that it doesn't know about it will deny it by default. And the
policy is entirely in userspace including declaring new types for stuff
like nsfs or pidfs to allow it.
For now we continue to raise S_PRIVATE on the inode if it's a pidfs
inode which means things behave exactly like before.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2265630
Link: https://github.com/fedora-selinux/selinux-policy/pull/2050
Link: https://github.com/bus1/dbus-broker/pull/343 [3]
Link: https://github.com/SELinuxProject/refpolicy/pull/762 [4]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240222190334.GA412503@dev-arch.thelio-3990X
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a helper for both nsfs and pidfs to reuse an already stashed dentry
or to add and stash a new dentry.
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
No filesystems depend on it anymore, and it is generally a bad idea.
Since all dentries should have the same set of dentry operations in
case-insensitive capable filesystems, it should be propagated through
->s_d_op.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-11-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
In preparation to drop the similar helper that sets d_op at lookup time,
add a version to set the right d_op filesystem-wide, through sb->s_d_op.
The operations structures are shared across filesystems supporting
fscrypt and/or casefolding, therefore we can keep it in common libfs
code.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-7-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
In preparation to get case-insensitive dentry operations from sb->s_d_op
again, use the same structure with and without fscrypt.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240221171412.10710-6-krisman@suse.de
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Casefolded comparisons are (obviously) way more costly than a simple
memcmp. Try the case-sensitive comparison first, falling-back to the
case-insensitive lookup only when needed. This allows any exact-match
lookup to complete without having to walk the utf8 trie.
Note that, for strict mode, generic_ci_d_compare used to reject an
invalid UTF-8 string, which would now be considered valid if it
exact-matches the disk-name. But, if that is the case, the filesystem
is corrupt. More than that, it really doesn't matter in practice,
because the name-under-lookup will have already been rejected by
generic_ci_d_hash and we won't even get here.
The memcmp is safe under RCU because we are operating on str/len instead
of dentry->d_name directly, and the caller guarantees their consistency
between each other in __d_lookup_rcu_op_compare.
Link: https://lore.kernel.org/r/87ttn2sip7.fsf_-_@mailhost.krisman.be
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net
Pull simple offset series from Chuck Lever
In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).
Thanks to Liam Howlett for helping me get this working with Maple
Trees.
* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
libfs: Convert simple directory offsets to use a Maple Tree
test_maple_tree: testing the cyclic allocation
maple_tree: Add mtree_alloc_cyclic()
libfs: Add simple_offset_empty()
libfs: Define a minimum directory offset
libfs: Re-arrange locking in offset_iterate_dir()
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Test robot reports:
> kernel test robot noticed a -19.0% regression of aim9.disk_src.ops_per_sec on:
>
> commit: a2e459555c5f9da3e619b7e47a63f98574dc75f1 ("shmem: stable directory offsets")
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master
Feng Tang further clarifies that:
> ... the new simple_offset_add()
> called by shmem_mknod() brings extra cost related with slab,
> specifically the 'radix_tree_node', which cause the regression.
Willy's analysis is that, over time, the test workload causes
xa_alloc_cyclic() to fragment the underlying SLAB cache.
This patch replaces the offset_ctx's xarray with a Maple Tree in the
hope that Maple Tree's dense node mode will handle this scenario
more scalably.
In addition, we can widen the simple directory offset maximum to
signed long (as loff_t is also signed).
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309081306.3ecb3734-oliver.sang@intel.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820145616.6328.12620992971699079156.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For simple filesystems that use directory offset mapping, rely
strictly on the directory offset map to tell when a directory has
no children.
After this patch is applied, the emptiness test holds only the RCU
read lock when the directory being tested has no children.
In addition, this adds another layer of confirmation that
simple_offset_add/remove() are working as expected.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820143463.6328.7872919188371286951.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This value is used in several places, so make it a symbolic
constant.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142741.6328.12428356024575347885.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Liam and Matthew say that once the RCU read lock is released,
xa_state is not safe to re-use for the next xas_find() call. But the
RCU read lock must be released on each loop iteration so that
dput(), which might_sleep(), can be called safely.
Thus we are forced to walk the offset tree with fresh state for each
directory entry. xa_find() can do this for us, though it might be a
little less efficient than maintaining xa_state locally.
We believe that in the current code base, inode->i_rwsem provides
protection for the xa_state maintained in
offset_iterate_dir(). However, there is no guarantee that will
continue to be the case in the future.
Since offset_iterate_dir() doesn't build xa_state locally any more,
there's no longer a strong need for offset_find_next(). Clean up by
rolling these two helpers together.
Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Message-ID: <170785993027.11135.8830043889278631735.stgit@91.116.238.104.host.secureserver.net>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820142021.6328.15047865406275957018.stgit@91.116.238.104.host.secureserver.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ret is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20240220062030.114203-1-zeming@nfschina.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new struct file_lease and move the lease-specific fields from
struct file_lock to it. Convert the appropriate API calls to take
struct file_lease instead, and convert the callers to use them.
There is zero overlap between the lock manager operations for file
locks and the ones for file leases, so split the lease-related
operations off into a new lease_manager_operations struct.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-47-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"Change of locking rules for __dentry_kill(), regularized refcounting
rules in that area, assorted cleanups and removal of weird corner
cases (e.g. now ->d_iput() on child is always called before the parent
might hit __dentry_kill(), etc)"
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
dcache: remove unnecessary NULL check in dget_dlock()
kill DCACHE_MAY_FREE
__d_unalias() doesn't use inode argument
d_alloc_parallel(): in-lookup hash insertion doesn't need an RCU variant
get rid of DCACHE_GENOCIDE
d_genocide(): move the extern into fs/internal.h
simple_fill_super(): don't bother with d_genocide() on failure
nsfs: use d_make_root()
d_alloc_pseudo(): move setting ->d_op there from the (sole) caller
kill d_instantate_anon(), fold __d_instantiate_anon() into remaining caller
retain_dentry(): introduce a trimmed-down lockless variant
__dentry_kill(): new locking scheme
d_prune_aliases(): use a shrink list
switch select_collect{,2}() to use of to_shrink_list()
to_shrink_list(): call only if refcount is 0
fold dentry_kill() into dput()
don't try to cut corners in shrink_lock_dentry()
fold the call of retain_dentry() into fast_dput()
Call retain_dentry() with refcount 0
dentry_kill(): don't bother with retain_dentry() on slow path
...
|
|
|
|
Failing ->fill_super() will be followed by ->kill_sb(), which should
include kill_litter_super() if the call of simple_fill_super() had
been asked to create anything besides the root dentry. So there's
no need to empty the partially populated tree - it will be trimmed
by inevitable kill_litter_super().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
