| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"Features:
- Allow handing out pidfds for reaped tasks for AF_UNIX SO_PEERPIDFD
socket option
SO_PEERPIDFD is a socket option that allows to retrieve a pidfd for
the process that called connect() or listen(). This is heavily used
to safely authenticate clients in userspace avoiding security bugs
due to pid recycling races (dbus, polkit, systemd, etc.)
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In
this case it currently returns EINVAL. Userspace still wants to get
a pidfd for a reaped process to have a stable handle it can pass
on. This is especially useful now that it is possible to retrieve
exit information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag
Another summary has been provided by David Rheinsberg:
> A pidfd can outlive the task it refers to, and thus user-space
> must already be prepared that the task underlying a pidfd is
> gone at the time they get their hands on the pidfd. For
> instance, resolving the pidfd to a PID via the fdinfo must be
> prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several
> kernel APIs currently add another layer that checks for this. In
> particular, SO_PEERPIDFD returns `EINVAL` if the peer-task was
> already reaped, but returns a stale pidfd if the task is reaped
> immediately after the respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways
> to check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though
> there is no particular reason to distinguish both cases. This
> also propagates through user-space APIs, which pass on pidfds.
> They must be prepared to pass on `-1` *or* the pidfd, because
> there is no guaranteed way to get a stale pidfd from the kernel.
>
> Userspace must already deal with a pidfd referring to a reaped
> task as the task may exit and get reaped at any time will there
> are still many pidfds referring to it
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to
ensure that PIDFD_INFO_EXIT information is available whenever a
pidfd for a reaped task is created by PIDFD_INFO_EXIT. The uapi
promises that reaped pidfds are only handed out if it is guaranteed
that the caller sees the exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs
entry for the relevant sk->sk_peer_pid at the time the
sk->sk_peer_pid is stashed and drop it when the socket is
destroyed. This guarantees that exit information will always be
recorded for the sk->sk_peer_pid task and we can hand out pidfds
for reaped processes
- Hand a pidfd to the coredump usermode helper process
Give userspace a way to instruct the kernel to install a pidfd for
the crashing process into the process started as a usermode helper.
There's still tricky race-windows that cannot be easily or
sometimes not closed at all by userspace. There's various ways like
looking at the start time of a process to make sure that the
usermode helper process is started after the crashing process but
it's all very very brittle and fraught with peril
The crashed-but-not-reaped process can be killed by userspace
before coredump processing programs like systemd-coredump have had
time to manually open a PIDFD from the PID the kernel provides
them, which means they can be tricked into reading from an
arbitrary process, and they run with full privileges as they are
usermode helper processes
Even if that specific race-window wouldn't exist it's still the
safest and cleanest way to let the kernel provide the pidfd
directly instead of requiring userspace to do it manually. In
parallel with this commit we already have systemd adding support
for this in [1]
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table
so it's available to the exec'd program
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is
empty and can thus always use three as the file descriptor number
Note, that we'll install a pidfd for the thread-group leader even
if a subthread is calling do_coredump(). We know that task linkage
hasn't been removed yet and even if this @current isn't the actual
thread-group leader we know that the thread-group leader cannot be
reaped until
@current has exited
- Allow telling when a task has not been found from finding the wrong
task when creating a pidfd
We currently report EINVAL whenever a struct pid has no tasked
attached anymore thereby conflating two concepts:
(1) The task has already been reaped
(2) The caller requested a pidfd for a thread-group leader but the
pid actually references a struct pid that isn't used as a
thread-group leader
This is causing issues for non-threaded workloads as in where they
expect ESRCH to be reported, not EINVAL
So allow userspace to reliably distinguish between (1) and (2)
- Make it possible to detect when a pidfs entry would outlive the
struct pid it pinned
- Add a range of new selftests
Cleanups:
- Remove unneeded NULL check from pidfd_prepare() for passed struct
pid
- Avoid pointless reference count bump during release_task()
Fixes:
- Various fixes to the pidfd and coredump selftests
- Fix error handling for replace_fd() when spawning coredump usermode
helper"
* tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: detect refcount bugs
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
net, pidfs: enable handing out pidfds for reaped sk->sk_peer_pid
pidfs: get rid of __pidfd_prepare()
net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid
pidfs: register pid in pidfs
net, pidfd: report EINVAL for ESRCH
release_task: kill the no longer needed get/put_pid(thread_pid)
pidfs: ensure consistent ENOENT/ESRCH reporting
exit: move wake_up_all() pidfd waiters into __unhash_process()
selftest/pidfd: add test for thread-group leader pidfd open for thread
pidfd: improve uapi when task isn't found
pidfd: remove unneeded NULL check from pidfd_prepare()
selftests/pidfd: adapt to recent changes
|
|
Extend the PIDFD_INFO_COREDUMP ioctl() with the new PIDFD_INFO_COREDUMP
mask flag. This adds the @coredump_mask field to struct pidfd_info.
When a task coredumps the kernel will provide the following information
to userspace in @coredump_mask:
* PIDFD_COREDUMPED is raised if the task did actually coredump.
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping (e.g.,
undumpable).
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server.
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should be
treated as sensitive and the coredump server should restrict to the
generated coredump to sufficiently privileged users.
The kernel guarantees that by the time the connection is made the all
PIDFD_INFO_COREDUMP info is available.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-5-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since all pidfds must be O_RDWR currently enfore that directly in the
file allocation function itself instead of letting callers specify it.
Link: https://lore.kernel.org/20250414-work-coredump-v2-1-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fold it into pidfd_prepare() and rename PIDFD_CLONE to PIDFD_STALE to
indicate that the passed pid might not have task linkage and no explicit
check for that should be performed.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-3-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add simple helpers that allow a struct pid to be pinned via a pidfs
dentry/inode. If no pidfs dentry exists a new one will be allocated for
it. A reference is taken by pidfs on @pid. The reference must be
released via pidfs_put_pid().
This will allow AF_UNIX sockets to allocate a dentry for the peer
credentials pid at the time they are recorded where we know the task is
still alive. When the task gets reaped its exit status is guaranteed to
be recorded and a pidfd can be handed out for the reaped task.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-1-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This makes it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead().
Readahead on anonymous inodes didn't work because they didn't have a
proper mode. Now that they have we need to retain EINVAL being returned
otherwise LTP will fail.
We also need to ensure that ioctls aren't simply fired like they are for
regular files so things like inotify inodes continue to correctly call
their own ioctl handlers as in [1].
Reported-by: Xilin Wu <sophon@radxa.com>
Link: https://lore.kernel.org/3A9139D5CD543962+89831381-31b9-4392-87ec-a84a5b3507d8@radxa.com [1]
Link: https://lore.kernel.org/7a1a7076-ff6b-4cb0-94e7-7218a0a44028@sirena.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So far pidfs did use it's own version. Just use the generic version.
We use our own wrappers because we're going to be implementing
properties soon.
Link: https://lore.kernel.org/20250407-work-anon_inode-v1-4-53a44c20d44e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So far pidfs did use it's own version. Just use the generic version. We
use our own wrappers because we're going to be implementing our own
retrieval properties soon.
Link: https://lore.kernel.org/20250407-work-anon_inode-v1-2-53a44c20d44e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
|
|
polling
This is another attempt trying to make pidfd polling for multi-threaded
exec and premature thread-group leader exit consistent.
A quick recap of these two cases:
(1) During a multi-threaded exec by a subthread, i.e., non-thread-group
leader thread, all other threads in the thread-group including the
thread-group leader are killed and the struct pid of the
thread-group leader will be taken over by the subthread that called
exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the thread-group
have exited.
Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD.
Any caller that holds a PIDFD_THREAD pidfd to the current thread-group
leader may or may not see an exit notification on the file descriptor
depending on when poll is performed. If the poll is performed before the
exec of the subthread has concluded an exit notification is generated
for the old thread-group leader. If the poll is performed after the exec
of the subthread has concluded no exit notification is generated for the
old thread-group leader.
The correct behavior would be to simply not generate an exit
notification on the struct pid of a subhthread exec because the struct
pid is taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
prematurely as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
So far there was no way to distinguish between (1) and (2) internally.
This tiny series tries to address this problem by discarding
PIDFD_THREAD notification on premature thread-group leader exit.
If that works correctly then no exit notifications are generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads have
been reaped. If a subthread should exec aftewards no exit notification
will be generated until that task exits or it creates subthreads and
repeates the cycle.
Co-Developed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-1-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When we currently create a pidfd we check that the task hasn't been
reaped right before we create the pidfd. But it is of course possible
that by the time we return the pidfd to userspace the task has already
been reaped since we don't check again after having created a dentry for
it.
This was fine until now because that race was meaningless. But now that
we provide PIDFD_INFO_EXIT it is a problem because it is possible that
the kernel returns a reaped pidfd and it depends on the race whether
PIDFD_INFO_EXIT information is available. This depends on if the task
gets reaped before or after a dentry has been attached to struct pid.
Make this consistent and only returned pidfds for reaped tasks if
PIDFD_INFO_EXIT information is available. This is done by performing
another check whether the task has been reaped right after we attached a
dentry to struct pid.
Since pidfs_exit() is called before struct pid's task linkage is removed
the case where the task got reaped but a dentry was already attached to
struct pid and exit information was recorded and published can be
handled correctly. In that case we do return a pidfd for a reaped task
like we would've before.
Link: https://lore.kernel.org/r/20250316-kabel-fehden-66bdb6a83436@brauner
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some tools like systemd's jounral need to retrieve the exit and cgroup
information after a process has already been reaped. This can e.g.,
happen when retrieving a pidfd via SCM_PIDFD or SCM_PEERPIDFD.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-6-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Record the exit code and cgroupid in release_task() and stash in struct
pidfs_exit_info so it can be retrieved even after the task has been
reaped.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-5-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Introduce a private inode slab cache for pidfs. In follow-up patches
pidfs will gain the ability to provide exit information to userspace
after the task has been reaped. This means storing exit information even
after the task has already been released and struct pid's task linkage
is gone. Store that information alongside the inode.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-4-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead od adding it into __pidfd_prepare() place it where the actual
file allocation happens and update the outdated comment.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-3-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We have a helper that deals with all the required logic.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-1-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs supports extensible and non-extensible ioctls. The extensible
ioctls need to check for the ioctl number itself not just the ioctl
command otherwise both backward- and forward compatibility are broken.
The pidfs ioctl handler also needs to look at the type of the ioctl
command to guard against cases where "[...] a daemon receives some
random file descriptor from a (potentially less privileged) client and
expects the FD to be of some specific type, it might call ioctl() on
this FD with some type-specific command and expect the call to fail if
the FD is of the wrong type; but due to the missing type check, the
kernel instead performs some action that userspace didn't expect."
(cf. [1]]
Link: https://lore.kernel.org/r/20250204-work-pidfs-ioctl-v1-1-04987d239575@kernel.org
Link: https://lore.kernel.org/r/CAG48ez2K9A5GwtgqO31u9ZL292we8ZwAA=TJwwEv7wRuJ3j4Lw@mail.gmail.com [1]
Fixes: 8ce352818820 ("pidfs: check for valid ioctl commands")
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org # v6.13; please backport with 8ce352818820 ("pidfs: check for valid ioctl commands")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow bind-mounting pidfds. Similar to nsfs let's allow bind-mounts for
pidfds. This allows pidfds to be safely recovered and checked for
process recycling.
Link: https://lore.kernel.org/r/20241219-work-pidfs-mount-v1-1-dbc56198b839@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The new pid inode number allocation scheme is neat but I overlooked a
possible, even though unlikely, attack that can be used to trigger an
overflow on both 32bit and 64bit.
An unique 64 bit identifier was constructed for each struct pid by two
combining a 32 bit idr with a 32 bit generation number. A 32bit number
was allocated using the idr_alloc_cyclic() infrastructure. When the idr
wrapped around a 32 bit wraparound counter was incremented. The 32 bit
wraparound counter served as the upper 32 bits and the allocated idr
number as the lower 32 bits.
Since the idr can only allocate up to INT_MAX entries everytime a
wraparound happens INT_MAX - 1 entries are lost (Ignoring that numbering
always starts at 2 to avoid theoretical collisions with the root inode
number.).
If userspace fully populates the idr such that and puts itself into
control of two entries such that one entry is somewhere in the middle
and the other entry is the INT_MAX entry then it is possible to overflow
the wraparound counter. That is probably difficult to pull off but the
mere possibility is annoying.
The problem could be contained to 32 bit by switching to a data
structure such as the maple tree that allows allocating 64 bit numbers
on 64 bit machines. That would leave 32 bit in a lurch but that probably
doesn't matter that much. The other problem is that removing entries
form the maple tree is somewhat non-trivial because the removal code can
be called under the irq write lock of tasklist_lock and
irq{save,restore} code.
Instead, allocate unique identifiers for struct pid by simply
incrementing a 64 bit counter and insert each struct pid into the rbtree
so it can be looked up to decode file handles avoiding to leak actual
pids across pid namespaces in file handles.
On both 64 bit and 32 bit the same 64 bit identifier is used to lookup
struct pid in the rbtree. On 64 bit the unique identifier for struct pid
simply becomes the inode number. Comparing two pidfds continues to be as
simple as comparing inode numbers.
On 32 bit the 64 bit number assigned to struct pid is split into two 32
bit numbers. The lower 32 bits are used as the inode number and the
upper 32 bits are used as the inode generation number. Whenever a
wraparound happens on 32 bit the 64 bit number will be incremented by 2
so inode numbering starts at 2 again.
When a wraparound happens on 32 bit multiple pidfds with the same inode
number are likely to exist. This isn't a problem since before pidfs
pidfds used the anonymous inode meaning all pidfds had the same inode
number. On 32 bit sserspace can thus reconstruct the 64 bit identifier
by retrieving both the inode number and the inode generation number to
compare, or use file handles. This gives the same guarantees on both 32
bit and 64 bit.
Link: https://lore.kernel.org/r/20241214-gekoppelt-erdarbeiten-a1f9a982a5a6@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prior to doing any work, check whether the provided ioctl command is
supported by pidfs.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On 64-bit platforms, userspace can read the pidfd's inode in order to
get a never-repeated PID identifier. On 32-bit platforms this identifier
is not exposed, as inodes are limited to 32 bits. Instead expose the
identifier via export_fh, which makes it available to userspace via
name_to_handle_at.
In addition we implement fh_to_dentry, which allows userspace to
recover a pidfd from a pidfs file handle.
Signed-off-by: Erin Shepherd <erin.shepherd@e43.eu>
[brauner: patch heavily rewritten]
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-6-87d803a42495@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Co-Developed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This will allow 32 bit userspace to detect when a given inode number has
been recycled and also to construct a unique 64 bit identifier.
Link: https://lore.kernel.org/r/20241129-work-pidfs-v2-3-61043d66fbce@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that we have a unified inode number handling model remove the custom
ida-based allocation for 32bit.
Link: https://lore.kernel.org/r/20241129-work-pidfs-v2-2-61043d66fbce@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recently we received a patchset that aims to enable file handle encoding
and decoding via name_to_handle_at(2) and open_by_handle_at(2).
A crucical step in the patch series is how to go from inode number to
struct pid without leaking information into unprivileged contexts. The
issue is that in order to find a struct pid the pid number in the
initial pid namespace must be encoded into the file handle via
name_to_handle_at(2). This can be used by containers using a separate
pid namespace to learn what the pid number of a given process in the
initial pid namespace is. While this is a weak information leak it could
be used in various exploits and in general is an ugly wart in the design.
To solve this problem a new way is needed to lookup a struct pid based
on the inode number allocated for that struct pid. The other part is to
remove the custom inode number allocation on 32bit systems that is also
an ugly wart that should go away.
So, a new scheme is used that I was discusssing with Tejun some time
back. A cyclic ida is used for the lower 32 bits and a the high 32 bits
are used for the generation number. This gives a 64 bit inode number
that is unique on both 32 bit and 64 bit. The lower 32 bit number is
recycled slowly and can be used to lookup struct pids.
Link: https://lore.kernel.org/r/20241129-work-pidfs-v2-1-61043d66fbce@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A common pattern when using pid fds is having to get information
about the process, which currently requires /proc being mounted,
resolving the fd to a pid, and then do manual string parsing of
/proc/N/status and friends. This needs to be reimplemented over
and over in all userspace projects (e.g.: I have reimplemented
resolving in systemd, dbus, dbus-daemon, polkit so far), and
requires additional care in checking that the fd is still valid
after having parsed the data, to avoid races.
Having a programmatic API that can be used directly removes all
these requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct
so that more parameters can be added later if needed. Start with
returning pid/tgid/ppid and creds unconditionally, and cgroupid
optionally.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Link: https://lore.kernel.org/r/20241010155401.2268522-1-luca.boccassi@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When we access a no-current task's pid namespace we need check that the
task hasn't been reaped in the meantime and it's pid namespace isn't
accessible anymore.
The user namespace is fine because it is only released when the last
reference to struct task_struct is put and exit_creds() is called.
Link: https://lore.kernel.org/r/20240926-klebt-altgedienten-0415ad4d273c@brauner
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors")
CC: stable@vger.kernel.org # v6.11
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The nsproxy structure contains nearly all of the namespaces associated
with a task. When a given namespace type is not supported by this kernel
the rules whether the corresponding pointer in struct nsproxy is NULL or
always init_<ns_type>_ns differ per namespace. Ideally, that wouldn't be
the case and for all namespace types we'd always set it to
init_<ns_type>_ns when the corresponding namespace type isn't supported.
Make sure we handle all namespaces where the pointer in struct nsproxy
can be NULL when the namespace type isn't supported.
Link: https://lore.kernel.org/r/20240722-work-pidfs-e6a83030f63e@brauner
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
syzbot call pidfd_ioctl() with cmd "PIDFD_GET_TIME_NAMESPACE" and disabled
CONFIG_TIME_NS, since time_ns is NULL, it will make NULL ponter deref in
open_namespace.
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Reported-and-tested-by: syzbot+34a0ee986f61f15da35d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34a0ee986f61f15da35d
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_7FAE8DB725EE0DD69236DDABDDDE195E4F07@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For users that hold a reference to a pidfd procfs might not even be
available nor is it desirable to parse through procfs just for the sake
of getting namespace file descriptors for a process.
Make it possible to directly retrieve namespace file descriptors from a
pidfd. Pidfds already can be used with setns() to change a set of
namespaces atomically.
Link: https://lore.kernel.org/r/20240627-work-pidfs-v1-4-7e9ab6cc3bb1@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pidfs started using much saner inodes in commit b28ddcc32d8f ("pidfs:
convert to path_from_stashed() helper"), but that exposed the fact that
lsof had some knowledge of just how odd our old anon_inode usage was.
For example, legacy anon_inodes hadn't even initialized the inode type
in the inode mode, so everything had a type of zero.
So sane tools like 'stat' would report these files as "weird file", but
'lsof' instead used that (together with the name of the link in proc) to
notice that it's an anonymous inode, and used it to detect pidfd files.
Let's keep our internal new sane inode model, but mask the file type
bits at 'stat()' time in the getattr() function we already have, and by
making the dentry name match what lsof expects too.
This keeps our internal models sane, but should make user space see the
same old odd behavior.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a15b1050-4b52-4740-a122-a4d055c17f11@kernel.org/
Link: https://github.com/lsof-org/lsof/issues/317
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seth Forshee <sforshee@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.
For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.
If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.
Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.
Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.
Tested on both 32 and 64bit including error injection.
Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Right now we pass a bunch of info that is fs specific which doesn't make
a lot of sense and it bleeds fs sepcific details into the generic
helper. nsfs and pidfs have slightly different needs when initializing
inodes. Add simple operations that are stashed in sb->s_fs_info that
both can implement. This also allows us to get rid of cleaning up
references in the caller. All in all path_from_stashed() becomes way
simpler.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both pidfs and nsfs use a memory location to stash a dentry for reuse by
concurrent openers. Right now two custom
dentry->d_prune::{ns,pidfs}_prune_dentry() methods are needed that do
the same thing. The only thing that differs is that they need to get to
the memory location to store or retrieve the dentry from differently.
Fix that by remember the stashing location for the dentry in
dentry->d_fsdata which allows us to retrieve it in dentry->d_prune. That
in turn makes it possible to add a common helper that pidfs and nsfs can
both use.
Link: https://lore.kernel.org/r/CAHk-=wg8cHY=i3m6RnXQ2Y2W8psicKWQEZq1=94ivUiviM-0OA@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In earlier patches we moved both nsfs and pidfs to path_from_stashed().
The helper currently tries to add and stash a new dentry if a reusable
dentry couldn't be found and returns EAGAIN if it lost the race to stash
the dentry. The caller can use EAGAIN to retry.
The helper and the two filesystems be written in a way that makes
returning EAGAIN unnecessary. To do this we need to change the
dentry->d_prune() implementation of nsfs and pidfs to not simply replace
the stashed dentry with NULL but to use a cmpxchg() and only replace
their own dentry.
Then path_from_stashed() can then be changed to not just stash a new
dentry when no dentry is currently stashed but also when an already dead
dentry is stashed. If another task managed to install a dentry in the
meantime it can simply be reused. Pack that into a loop and call it a
day.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgtLF5Z5=15-LKAczWm=-tUjHO+Bpf7WjBG+UU3s=fEQw@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Moving pidfds from the anonymous inode infrastructure to a separate tiny
in-kernel filesystem similar to sockfs, pipefs, and anon_inodefs causes
selinux denials and thus various userspace components that make heavy
use of pidfds to fail as pidfds used anon_inode_getfile() which aren't
subject to any LSM hooks. But dentry_open() is and that would cause
regressions.
The failures that are seen are selinux denials. But the core failure is
dbus-broker. That cascades into other services failing that depend on
dbus-broker. For example, when dbus-broker fails to start polkit and all
the others won't be able to work because they depend on dbus-broker.
The reason for dbus-broker failing is because it doesn't handle failures
for SO_PEERPIDFD correctly. Last kernel release we introduced
SO_PEERPIDFD (and SCM_PIDFD). SO_PEERPIDFD allows dbus-broker and polkit
and others to receive a pidfd for the peer of an AF_UNIX socket. This is
the first time in the history of Linux that we can safely authenticate
clients in a race-free manner.
dbus-broker immediately made use of this but messed up the error
checking. It only allowed EINVAL as a valid failure for SO_PEERPIDFD.
That's obviously problematic not just because of LSM denials but because
of seccomp denials that would prevent SO_PEERPIDFD from working; or any
other new error code from there.
So this is catching a flawed implementation in dbus-broker as well. It
has to fallback to the old pid-based authentication when SO_PEERPIDFD
doesn't work no matter the reasons otherwise it'll always risk such
failures. So overall that LSM denial should not have caused dbus-broker
to fail. It can never assume that a feature released one kernel ago like
SO_PEERPIDFD can be assumed to be available.
So, the next fix separate from the selinux policy update is to try and
fix dbus-broker at [3]. That should make it into Fedora as well. In
addition the selinux reference policy should also be updated. See [4]
for that. If Selinux is in enforcing mode in userspace and it encounters
anything that it doesn't know about it will deny it by default. And the
policy is entirely in userspace including declaring new types for stuff
like nsfs or pidfs to allow it.
For now we continue to raise S_PRIVATE on the inode if it's a pidfs
inode which means things behave exactly like before.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2265630
Link: https://github.com/fedora-selinux/selinux-policy/pull/2050
Link: https://github.com/bus1/dbus-broker/pull/343 [3]
Link: https://github.com/SELinuxProject/refpolicy/pull/762 [4]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240222190334.GA412503@dev-arch.thelio-3990X
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This moves pidfds from the anonymous inode infrastructure to a tiny
pseudo filesystem. This has been on my todo for quite a while as it will
unblock further work that we weren't able to do simply because of the
very justified limitations of anonymous inodes. Moving pidfds to a tiny
pseudo filesystem allows:
* statx() on pidfds becomes useful for the first time.
* pidfds can be compared simply via statx() and then comparing inode
numbers.
* pidfds have unique inode numbers for the system lifetime.
* struct pid is now stashed in inode->i_private instead of
file->private_data. This means it is now possible to introduce
concepts that operate on a process once all file descriptors have been
closed. A concrete example is kill-on-last-close.
* file->private_data is freed up for per-file options for pidfds.
* Each struct pid will refer to a different inode but the same struct
pid will refer to the same inode if it's opened multiple times. In
contrast to now where each struct pid refers to the same inode. Even
if we were to move to anon_inode_create_getfile() which creates new
inodes we'd still be associating the same struct pid with multiple
different inodes.
The tiny pseudo filesystem is not visible anywhere in userspace exactly
like e.g., pipefs and sockfs. There's no lookup, there's no complex
inode operations, nothing. Dentries and inodes are always deleted when
the last pidfd is closed.
We allocate a new inode for each struct pid and we reuse that inode for
all pidfds. We use iget_locked() to find that inode again based on the
inode number which isn't recycled. We allocate a new dentry for each
pidfd that uses the same inode. That is similar to anonymous inodes
which reuse the same inode for thousands of dentries. For pidfds we're
talking way less than that. There usually won't be a lot of concurrent
openers of the same struct pid. They can probably often be counted on
two hands. I know that systemd does use separate pidfd for the same
struct pid for various complex process tracking issues. So I think with
that things actually become way simpler. Especially because we don't
have to care about lookup. Dentries and inodes continue to be always
deleted.
The code is entirely optional and fairly small. If it's not selected we
fallback to anonymous inodes. Heavily inspired by nsfs which uses a
similar stashing mechanism just for namespaces.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-2-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the pidfd file operations over to their own file in preparation of
implementing pidfs and to isolate them from other mostly unrelated
functionality in other files.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-1-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
