| Age | Commit message (Collapse) | Author |
|---|
|
Frank reported, that the common irq_force_complete_move() breaks the out of
tree build of ia64. The reason is that ia64 uses the migration code, but
does not have hierarchical interrupt domains enabled.
This went unnoticed in mainline as both x86 and RISC-V have hierarchical
domains enabled. Not that it matters for mainline, but it's still
inconsistent.
Use irqd_get_parent_data() instead of accessing the parent_data field
directly. The helper returns NULL when hierarchical domains are disabled
otherwise it accesses the parent_data field of the domain.
No functional change.
Fixes: 751dc837dabd ("genirq: Introduce common irq_force_complete_move() implementation")
Reported-by: Frank Scheiner <frank.scheiner@web.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frank Scheiner <frank.scheiner@web.de>
Link: https://lore.kernel.org/all/87h634ugig.ffs@tglx
|
|
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_get_default_host() to irq_get_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org
|
|
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_set_default_host() to irq_set_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"
This reverts commit 36f5f026df6c1cd8a20373adc4388d2b3401ce91, reversing
changes made to 43a7eec035a5b64546c8adefdc9cf96a116da14b.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
|
|
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Now that all abuse is gone and the legit users are converted to
guard(msi_descs_lock), rename the lock functions and document them as
internal.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/all/20250313130322.027190131@linutronix.de
|
|
Provide a lock guard for MSI descriptor locking and update the core code
accordingly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250313130321.506045185@linutronix.de
|
|
None of these functions are used outside of the MSI core.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250309084110.204054172@linutronix.de
|
|
None of these functions are used outside of their source files.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/878qpe2gnx.ffs@tglx
|
|
When debugging MSI-related hardware issues (e.g. interrupt delivery
failures), developers currently need to either:
1. Recompile the kernel with dynamic debug for tracing msi_desc.
2. Manually read device registers through low-level tools.
Both approaches become challenging in production environments where
dynamic debugging is often disabled.
The interrupt core provides a debugfs interface for inspection of interrupt
related data, which contains the per interrupt information in the view of
the hierarchical interrupt domains. Though this interface does not expose
the MSI address/data pair, which is important information to:
- Verify whether the MSI configuration matches the hardware expectations
- Diagnose interrupt routing errors (e.g., mismatched destination ID)
- Validate remapping behavior in virtualized environments
Implement the debug_show() callback for the generic MSI interrupt domains,
and use it to expose the MSI address/data pair in the per interrupt
diagnostics.
Sample output:
address_hi: 0x00000000
address_lo: 0xfe670040
msg_data: 0x00000001
[ tglx: Massaged change log. Use irq_data_get_msi_desc() to avoid pointless
lookup. ]
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250303121008.309265-1-18255117159@163.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core
iommu shared branch with iommufd
The three dependent series on a shared branch:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
|
|
The powerpc Cell blade support, now removed, was the only user of
IRQ_EDGE_EOI_HANDLER, so remove it.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-21-mpe@ellerman.id.au
|
|
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide
an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll
make more sense for irqchips that call prepare/compose to select it, and
that will trigger all the additional code and data to be compiled into
the kernel.
If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the
prepare/compose() will be NOP stubs.
If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on
the iommu side is compiled out.
Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Interrupt controller drivers which enable CONFIG_GENERIC_PENDING_IRQ
require to know whether an interrupt can be moved in process context or not
to decide whether they need to invoke the work around for non-atomic MSI
updates or not.
This information can be retrieved via irq_can_move_pcntxt(). That helper
requires access to the top-most interrupt domain data, but the driver which
requires this is usually further down in the hierarchy.
Introduce irq_can_move_in_process_context() which retrieves that
information from the top-most interrupt domain data.
[ tglx: Massaged change log ]
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-6-apatel@ventanamicro.com
|
|
CONFIG_GENERIC_PENDING_IRQ requires an architecture specific implementation
of irq_force_complete_move() for CPU hotplug. At the moment, only x86
implements this unconditionally, but for RISC-V irq_force_complete_move()
is only needed when the RISC-V IMSIC driver is in use and not needed
otherwise.
To allow runtime configuration of this mechanism, introduce a common
irq_force_complete_move() implementation in the interrupt core code, which
only invokes the completion function, when a interrupt chip in the
hierarchy implements it.
Switch X86 over to the new mechanism. No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-5-apatel@ventanamicro.com
|
|
CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS is not used anymore, hence remove it.
Fixes: f94a18249b7f ("genirq: Remove IRQ_MOVE_PCNTXT and related code")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250209041655.331470-7-apatel@ventanamicro.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
|
The recent conversion of brcmstb_l2_mask_and_ack() to
irq_gc_mask_disable_and_ack_set() missed that the driver can be built as a
module, but the generic function is not exported.
Add the missing export.
[ tglx: Converted it to a fix ]
Fixes: dd1f17a9faf5 ("irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function")
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250116005920.626822-1-linux@treblig.org
|
|
Add the description for @now to eliminate a kernel-doc warning.
timings.c:537: warning: Function parameter or struct member 'now' not described in 'irq_timings_next_event'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250111062954.910657-1-rdunlap@infradead.org
|
|
Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags,
remove IRQ*_MOVE_PCNTXT and related code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de
|
|
The logic of GENERIC_PENDING_IRQ is backwards for historical reasons. Most
interrupt controllers allow to move the interrupt from arbitrary
contexts. If GENERIC_PENDING_IRQ is enabled by an architecture to support a
chip, which requires the affinity change to happen in interrupt context,
all other chips have to be marked with IRQF_MOVE_PCNTXT.
That's tedious and there is no real good reason for the extra flags in the
irq descriptor and the irq data status fields. In fact the decision whether
interrupts can be moved in arbitrary context or not is a property of the
interrupt chip.
To simplify adoption for RISC-V provide a new mechanism which is enabled
via a config switch and allows to add a flag to irq_chip::flags to request
that interrupt affinity changes are deferred. Setting the top level chip of
an interrupt evaluates the flag and maps it into the existing logic.
The config switch and the various PCNTXT flags are temporary until x86 is
converted over to this scheme. This intermediate step also allows trivial
backporting of the mechanism to plug the affinity change race of various
RISC-V interrupt controllers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.500314436@linutronix.de
|
|
Now that it is unconditionally available, remove the wrapper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210101811.561078243@linutronix.de
|
|
Commit 1b57d91b969c ("irqchip/gic-v2, v3: Prevent SW resends entirely")
sett the flag which enforces interrupt handling in interrupt context and
prevents software base resends for ARM GIC v2/v3.
But it missed that the helper function which checks the flag was hidden
behind CONFIG_GENERIC_PENDING_IRQ, which is not set by ARM[64].
Make the helper unconditionally available so that the enforcement actually
works.
Fixes: 1b57d91b969c ("irqchip/gic-v2, v3: Prevent SW resends entirely")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210101811.497716609@linutronix.de
|
|
During machine kexec, machine_kexec_mask_interrupts() is responsible for
disabling or masking all interrupts. While the irq_disable() is only
invoked when the interrupt is not yet disabled, it unconditionally invokes
the irq_mask() callback for every interrupt descriptor, even when the
interrupt is already masked or not even started up yet.
A specific issue was observed in the crash kernel flow after unbinding a
device (prior to kexec) that used a GPIO as an IRQ source. The warning was
triggered by the gpiochip_disable_irq() function, which attempts to clear
the FLAG_IRQ_IS_ENABLED flag when FLAG_USED_AS_IRQ was not set.
This issue surfaced after commit a8173820f441 ("gpio: gpiolib: Allow GPIO
IRQs to lazy disable") introduced lazy disablement for GPIO IRQs. It
replaced disable/enable hooks with mask/unmask hooks. Unlike the disable
hook, the mask hook doesn't handle already-masked IRQs.
When a GPIO-IRQ driver is unbound, the IRQ is released, triggering
__irq_disable() and irq_state_set_masked(). A subsequent call to
machine_kexec_mask_interrupts() re-invokes chip->irq_mask(). This results
in a call chain, including gpiochip_irq_mask() and gpiochip_disable_irq().
Since FLAG_USED_AS_IRQ was cleared earlier, the warning is triggered.
Replace the direct invocation of the irq_mask() and irq_disable() callbacks
invoking to irq_shutdown(), which handles the cases correct and avoid it
all together when the interrupt has never been started up.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-3-farbere@amazon.com
|
|
Consolidate the machine_kexec_mask_interrupts implementation into a common
function located in a new file: kernel/irq/kexec.c. This removes duplicate
implementations from architecture-specific files in arch/arm, arch/arm64,
arch/powerpc, and arch/riscv, reducing code duplication and improving
maintainability.
The new implementation retains architecture-specific behavior for
CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented
for ARM64. When enabled (currently for ARM64), it clears the active state
of interrupts forwarded to virtual machines (VMs) before handling other
interrupt masking operations.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
|
|
The recent conversion of show_interrupts() to seq_put_decimal_ull_width()
caused a formatting regression as it drops a previosuly existing space
separator.
Add it back by unconditionally inserting a space after the interrupt
counts and removing the extra leading space from the chip name prints.
Fixes: f9ed1f7c2e26 ("genirq/proc: Use seq_put_decimal_ull_width() for decimal values")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/87zfldt5g4.ffs@tglx
Closes: https://lore.kernel.org/all/4ce18851-6e9f-bbe-8319-cc5e69fb45c@linux-m68k.org
|
|
rq_forced_thread_fn() uses the same action callback as the non-forced
variant but with different locking decorations. Reuse irq_thread_fn() here
to make that clear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241119104339.2112455-3-andriy.shevchenko@linux.intel.com
|
|
In a preparation to reuse irq_thread_fn() move it further up in the
code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241119104339.2112455-2-andriy.shevchenko@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
seq_printf() is more expensive than seq_put_decimal_ull_width() due to the
format string parsing costs.
Profiling on a x86 8-core system indicates seq_printf() takes ~47% samples
of show_interrupts(). Replacing it with seq_put_decimal_ull_width() yields
almost 30% performance gain.
[ tglx: Massaged changelog and fixed up coding style ]
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241108160717.9547-1-00107082@163.com
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026154029.158977-2-thorsten.blum@linux.dev
|
|
The error path in msi_domain_alloc(), frees the already allocated MSI
interrupts in a loop, but the loop condition terminates when the index
reaches zero, which fails to free the first allocated MSI interrupt at
index zero.
Check for >= 0 so that msi[0] is freed as well.
Fixes: f3cf8bb0d6c3 ("genirq: Add generic msi irq domain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026063639.10711-1-ruanjinjie@huawei.com
|
|
If devres_destroy() does not find a matching devres entry, then
devm_free_irq() emits a warning and tries to free the interrupt.
That's wrong as devm_free_irq() should only undo what devm_request_irq()
set up.
Replace devres_destroy() with a call to devres_release() which only invokes
the release function (free_irq()) in case that a matching devres entry was
found.
[ tglx: Massaged change log ]
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241018-devres_kernel_fix-v2-1-08918ae84982@quicinc.com
|
|
Unexport nr_irqs and declare it static now that all code that reads or
modifies nr_irqs has been converted to number_of_interrupts() /
set_number_of_interrupts(). Change the type of 'nr_irqs' from 'int' into
'unsigned int' to match the return type and argument type of the
irq_get_nr_iqs() / irq_set_nr_irqs() functions.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-23-bvanassche@acm.org
|
|
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Cache the result of this function in a local variable in
order not to rely on CSE (common subexpression elimination). Prepare
for changing 'nr_irqs' from an exported global variable into a variable
with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-22-bvanassche@acm.org
|
|
Prepare for changing 'nr_irqs' from an exported global variable into a
variable with file scope.
This will prevent accidental changes of assignments to a local variable
'nr_irqs' into assignments to the global 'nr_irqs' variable.
Suppose that a patch would be submitted for review that removes a
declaration of a local variable with the name 'nr_irqs' and that that patch
does not remove all assignments to that local variable. Such a patch
converts an assignment to a local variable into an assignment into a global
variable. If the 'nr_irqs' assignment is more than three lines away from
other changes, the assignment won't be included in the diff context lines
and hence won't be visible without inspecting the modified file.
With these abstraction series applied, such accidental conversions from
assignments to a local variable into an assignment to a global variable are
converted into a compilation error.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-2-bvanassche@acm.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids` and `cpumask_any_and(a, b) <
nr_cpu_ids` with the more readable `!cpumask_intersects(a, b)` and
`cpumask_intersects(a, b)`
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240906170142.1135207-1-costa.shul@redhat.com
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids`
with the more readable `!cpumask_intersects(a, b)`.
[ tglx: Massaged change log ]
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/all/20240904134823.777623-2-costa.shul@redhat.com
|
|
Use IS_ERR_OR_NULL() instead of open-coding a NULL and a error pointer
check.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240828122724.3697447-1-lihongbo22@huawei.com
|
|
Let kmemdup_array() take care about sizing instead of doing it open coded.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240828072219.1249250-1-ruanjinjie@huawei.com
|
|
Currently, when the affinity of an irq cannot be set due to lack of
permission, the write_irq_affinity() returns the error code -EIO.
Change the return value to -EPERM as that reflects the cause of error
correctly.
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240826145805.5938-1-jeff.xie@linux.dev
|
|
irq_move_pending() encapsulates irqd_is_setaffinity_pending() depending on
CONFIG_GENERIC_PENDING_IRQ.
Replace the open coded #ifdeffery with it.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240829111522.230595-1-ruanjinjie@huawei.com
|
|
The kernel already knows at the time of interrupt allocation whether
affinity of an interrupt can be controlled by userspace or not.
It still creates all related procfs control files with read/write
permissions. That's inconsistent and non-intuitive for system
administrators and tools.
Therefore set the file permissions to read-only for such interrupts.
[ tglx: Massage change log, fixed UP build ]
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825131911.107119-1-jeff.xie@linux.dev
|
