summaryrefslogtreecommitdiff
path: root/net/can
AgeCommit message (Collapse)Author
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-26Merge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc8). Conflict: tools/testing/selftests/net/Makefile 03544faad761 ("selftest: net: add proc_net_pktgen") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") tools/testing/selftests/net/config: 85cb3711acb8 ("selftests: net: Add test cases for link and peer netns") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") Adjacent commits: tools/testing/selftests/net/Makefile c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY") 355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-14can: add protocol counter for AF_CAN socketsDavide Caratti
The third column in the output of the following command: | # grep CAN /proc/net/protocols is systematically '0': use sock_prot_inuse_add() to account for the number of sockets for each protocol on top of AF_CAN family. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://patch.msgid.link/9db5d0e6c11b232ad895885616f1258882a32f61.1741952160.git.dcaratti@redhat.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14can: statistics: use atomic access in hot pathOliver Hartkopp
In can_send() and can_receive() CAN messages and CAN filter matches are counted to be visible in the CAN procfs files. KCSAN detected a data race within can_send() when two CAN frames have been generated by a timer event writing to the same CAN netdevice at the same time. Use atomic operations to access the statistics in the hot path to fix the KCSAN complaint. Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-02-18net: initialize mark in sockcm_initWillem de Bruijn
Avoid open coding initialization of sockcm fields. Avoid reading the sk_priority field twice. This ensures all callers, existing and future, will correctly try a cmsg passed mark before sk_mark. This patch extends support for cmsg mark to: packet_spkt and packet_tpacket and net/can/raw.c. This patch extends support for cmsg priority to: packet_spkt and packet_tpacket. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250214222720.3205500-3-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-18can: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Most of this patch is generated by Coccinelle. Except for the TX thrtimer in bcm_tx_setup() because this timer is not used and the callback function is never set. For this particular case, set the callback to hrtimer_dummy_timeout() Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/a3a6be42c818722ad41758457408a32163bfd9a0.1738746872.git.namcao@linutronix.de
2025-02-08can: j1939: j1939_sk_send_loop(): fix unable to send messages with data ↵Alexander Hölzl
length zero The J1939 standard requires the transmission of messages of length 0. For example proprietary messages are specified with a data length of 0 to 1785. The transmission of such messages is not possible. Sending results in no error being returned but no corresponding can frame being generated. Enable the transmission of zero length J1939 messages. In order to facilitate this two changes are necessary: 1) If the transmission of a new message is requested from user space the message is segmented in j1939_sk_send_loop(). Let the segmentation take into account zero length messages, do not terminate immediately, queue the corresponding skb. 2) j1939_session_skb_get_by_offset() selects the next skb to transmit for a session. Take into account that there might be zero length skbs in the queue. Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org [mkl: commit message rephrased] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-12-16sock: support SO_PRIORITY cmsgAnna Emese Nyiri
The Linux socket API currently allows setting SO_PRIORITY at the socket level, applying a uniform priority to all packets sent through that socket. The exception to this is IP_TOS, when the priority value is calculated during the handling of ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data"). However, this is a computed value, and there is currently no mechanism to set a custom priority via control messages prior to this patch. According to this patch, if SO_PRIORITY is specified as ancillary data, the packet is sent with the priority value set through sockc->priority, overriding the socket-level values set via the traditional setsockopt() method. This is analogous to the existing support for SO_MARK, as implemented in commit c6af0c227a22 ("ip: support SO_MARK cmsg"). If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that takes precedence is the last one in the cmsg list. This patch has the side effect that raw_send_hdrinc now interprets cmsg IP_TOS. Reviewed-by: Willem de Bruijn <willemb@google.com> Suggested-by: Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com> Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-02can: j1939: j1939_session_new(): fix skb reference countingDmitry Antipov
Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow. Reported-by: syzbot+d4e8dc385d9258220c31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d4e8dc385d9258220c31 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20241105094823.2403806-1-dmantipov@yandex.ru [mkl: clean up commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-10-15can: gw: Use rtnl_register_many().Kuniyuki Iwashima
We will remove rtnl_register_module() in favour of rtnl_register_many(). rtnl_register_many() will unwind the previous successful registrations on failure and simplify module error handling. Let's use rtnl_register_many() instead. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014201828.91221-11-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-15net: af_can: do not leave a dangling sk pointer in can_create()Ignat Korchagin
On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net_tstamp: add SCM_TS_OPT_ID for RAW socketsVadim Fedorenko
The last type of sockets which supports SOF_TIMESTAMPING_OPT_ID is RAW sockets. To add new option this patch converts all callers (direct and indirect) of _sock_tx_timestamp to provide sockcm_cookie instead of tsflags. And while here fix __sock_tx_timestamp to receive tsflags as __u32 instead of __u16. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Link: https://patch.msgid.link/20241001125716.2832769-3-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.12 net-next PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().Kuniyuki Iwashima
syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 </TASK> Fixes: 76fe372ccb81 ("can: bcm: Remove proc entry when dev is unregistered.") Reported-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0532ac7a06fb1a03187e Tested-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20240905012237.79683-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-30can: j1939: use correct function name in commentZhang Changzhong
The function j1939_cancel_all_active_sessions() was renamed to j1939_cancel_active_session() but name in comment wasn't updated. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-08-06can: bcm: Remove proc entry when dev is unregistered.Kuniyuki Iwashima
syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240722192842.37421-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-21net: can: j1939: recover socket queue on CAN bus error during BAM transmissionOleksij Rempel
Addresses an issue where a CAN bus error during a BAM transmission could stall the socket queue, preventing further transmissions even after the bus error is resolved. The fix activates the next queued session after the error recovery, allowing communication to continue. Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21net: can: j1939: Initialize unused data in j1939_send_one()Shigeru Yoshida
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-and-tested-by: syzbot+5681e40d297b30f5b513@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5681e40d297b30f5b513 Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/all/20240517035953.2617090-1-syoshida@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21net: can: j1939: enhanced error handling for tightly received RTS messages ↵Oleksij Rempel
in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-20can: isotp: remove ISO 15675-2 specification version where possibleOliver Hartkopp
With the new ISO 15765-2:2024 release the former documentation and comments have to be reworked. This patch removes the ISO specification version/date where possible. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Francesco Valla <valla.francesco@gmail.com> Link: https://lore.kernel.org/all/20240420194746.4885-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-20Merge tag 'linux-can-next-for-6.9-20240220' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-02-20 this is a pull request of 9 patches for net-next/master. The first patch is by Francesco Dolcini and removes a redundant check for pm_clock_support from the m_can driver. Martin Hundebøll contributes 3 patches to the m_can/tcan4x5x driver to allow resume upon RX of a CAN frame. 3 patches by Srinivas Goud add support for ECC statistics to the xilinx_can driver. The last 2 patches are by Oliver Hartkopp and me, target the CAN RAW protocol and fix an error in the getsockopt() for CAN-XL introduced in the previous pull request to net-next (linux-can-next-for-6.9-20240213). linux-can-next-for-6.9-20240220 * tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: raw: raw_getsockopt(): reduce scope of err can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTS can: xilinx_can: Add ethtool stats interface for ECC errors can: xilinx_can: Add ECC support dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property can: tcan4x5x: support resuming from rx interrupt signal can: m_can: allow keeping the transceiver running in suspend dt-bindings: can: tcan4x5x: Document the wakeup-source flag can: m_can: remove redundant check for pm_clock_support ==================== Link: https://lore.kernel.org/r/20240220085130.2936533-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-20can: raw: raw_getsockopt(): reduce scope of errMarc Kleine-Budde
Reduce the scope of the variable "err" to the individual cases. This is to avoid the mistake of setting "err" in the mistaken belief that it will be evaluated later. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-20can: raw: fix getsockopt() for new CAN_RAW_XL_VCID_OPTSOliver Hartkopp
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted from the CAN_RAW_FILTER getsockopt(). Add the missing put_user() and return statements. Flagged by Smatch. Fixes: c83c22ec1493 ("can: canxl: add virtual CAN network identifier support") Reported-by: Simon Horman <horms@kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)Oleksij Rempel
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Reported-by: Sili Luo <rootlab@huawei.com> Suggested-by: Sili Luo <rootlab@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14can: j1939: prevent deadlock by changing j1939_socks_lock to rwlockZiqi Zhao
The following 3 locks would race against each other, causing the deadlock situation in the Syzbot bug report: - j1939_socks_lock - active_session_list_lock - sk_session_queue_lock A reasonable fix is to change j1939_socks_lock to an rwlock, since in the rare situations where a write lock is required for the linked list that j1939_socks_lock is protecting, the code does not attempt to acquire any more locks. This would break the circular lock dependency, where, for example, the current thread already locks j1939_socks_lock and attempts to acquire sk_session_queue_lock, and at the same time, another thread attempts to acquire j1939_socks_lock while holding sk_session_queue_lock. NOTE: This patch along does not fix the unregister_netdevice bug reported by Syzbot; instead, it solves a deadlock situation to prepare for one or more further patches to actually fix the Syzbot bug, which appears to be a reference counting problem within the j1939 codebase. Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com> Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com [mkl: remove unrelated newline change] Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-13can: canxl: add virtual CAN network identifier supportOliver Hartkopp
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID). A VCID value of zero represents an 'untagged' CAN XL frame. To receive and send these optional VCIDs via CAN_RAW sockets a new socket option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content: - tx: set the outgoing VCID value by the kernel (one fixed 8-bit value) - tx: pass through VCID values from the user space (e.g. for traffic replay) - rx: apply VCID receive filter (value/mask) to be passed to the user space With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID values can be sent, e.g. to replay full qualified CAN XL traffic. The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will override the VCID value in the struct canxl_frame.prio defined for CAN_RAW_XL_VCID_TX_PASS when both flags are set. With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set. Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered to the user space (default). The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL frames!) to not interfere with other CAN content or the CAN filters provided by the CAN_RAW sockets and kernel infrastruture. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: isotp: support dynamic flow control parametersOliver Hartkopp
The ISO15765-2 standard supports to take the PDUs communication parameters blocksize (BS) and Separation Time minimum (STmin) either from the first received flow control (FC) "static" or from every received FC "dynamic". Add a new CAN_ISOTP_DYN_FC_PARMS flag to support dynamic FC parameters. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20231208165729.3011-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-12can: bcm: add recvmsg flags for own, local and remote trafficNicolas Maier
CAN RAW sockets allow userspace to tell if a received CAN frame comes from the same socket, another socket on the same host, or another host. See commit 1e55659ce6dd ("can-raw: add msg_flags to distinguish local traffic"). However, this feature is missing in CAN BCM sockets. Add the same feature to CAN BCM sockets. When reading a received frame (opcode RX_CHANGED) using recvmsg, two flags in msg->msg_flags may be set following the previous convention (from CAN RAW), to distinguish between 'own', 'local' and 'remote' CAN traffic. Update the documentation to reflect this change. Signed-off-by: Nicolas Maier <nicolas.maier.dev@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240120081018.2319-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: kernel/bpf/verifier.c 829955981c55 ("bpf: Fix verifier log for async callback return values") a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06can: isotp: isotp_sendmsg(): fix TX state detection and wait behaviorLukas Magel
With patch [1], isotp_poll was updated to also queue the poller in the so->wait queue, which is used for send state changes. Since the queue now also contains polling tasks that are not interested in sending, the queue fill state can no longer be used as an indication of send readiness. As a consequence, nonblocking writes can lead to a race and lock-up of the socket if there is a second task polling the socket in parallel. With this patch, isotp_sendmsg does not consult wq_has_sleepers but instead tries to atomically set so->tx.state and waits on so->wait if it is unable to do so. This behavior is in alignment with isotp_poll, which also checks so->tx.state to determine send readiness. V2: - Revert direct exit to goto err_event_drop [1] https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz Reported-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Closes: https://lore.kernel.org/linux-can/11328958-453f-447f-9af8-3b5824dfb041@munic.io/ Signed-off-by: Lukas Magel <lukas.magel@posteo.net> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 79e19fa79cb5 ("can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events") Link: https://github.com/pylessard/python-udsoncan/issues/178#issuecomment-1743786590 Link: https://lore.kernel.org/all/20230827092205.7908-1-lukas.magel@posteo.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-04can: raw: Remove NULL check before dev_{put, hold}Jiapeng Chong
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning: ./net/can/raw.c:497:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6231 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reported-by: Simon Horman <horms@kernel.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230825064656.87751-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-01net: implement lockless SO_PRIORITYEric Dumazet
This is a followup of 8bf43be799d4 ("net: annotate data-races around sk->sk_priority"). sk->sk_priority can be read and written without holding the socket lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: annotate data-races around sk->sk_tsflagsEric Dumazet
sk->sk_tsflags can be read locklessly, add corresponding annotations. Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22can: raw: add missing refcount for memory leak fixOliver Hartkopp
Commit ee8b94c8510c ("can: raw: fix receiver memory leak") introduced a new reference to the CAN netdevice that has assigned CAN filters. But this new ro->dev reference did not maintain its own refcount which lead to another KASAN use-after-free splat found by Eric Dumazet. This patch ensures a proper refcount for the CAN nedevice. Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak") Reported-by: Eric Dumazet <edumazet@google.com> Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22can: isotp: fix support for transmission of SF without flow controlOliver Hartkopp
The original implementation had a very simple handling for single frame transmissions as it just sent the single frame without a timeout handling. With the new echo frame handling the echo frame was also introduced for single frames but the former exception ('simple without timers') has been maintained by accident. This leads to a 1 second timeout when closing the socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected. As the echo handling is always active (also for single frames) remove the wrong extra condition for single frames. Fixes: 9f39d36530e5 ("can: isotp: add support for transmission without flow control") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-29net: annotate data-races around sk->sk_markEric Dumazet
sk->sk_mark is often read while another thread could change the value. Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-20can: raw: fix lockdep issue in raw_release()Eric Dumazet
syzbot complained about a lockdep issue [1] Since raw_bind() and raw_setsockopt() first get RTNL before locking the socket, we must adopt the same order in raw_release() [1] WARNING: possible circular locking dependency detected 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Not tainted ------------------------------------------------------ syz-executor.0/14110 is trying to acquire lock: ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1708 [inline] ffff88804e4b6130 (sk_lock-AF_CAN){+.+.}-{0:0}, at: raw_bind+0xb1/0xab0 net/can/raw.c:435 but task is already holding lock: ffffffff8e3df368 (rtnl_mutex){+.+.}-{3:3}, at: raw_bind+0xa7/0xab0 net/can/raw.c:434 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x181/0x1340 kernel/locking/mutex.c:747 raw_release+0x1c6/0x9b0 net/can/raw.c:391 __sock_release+0xcd/0x290 net/socket.c:654 sock_close+0x1c/0x20 net/socket.c:1386 __fput+0x3fd/0xac0 fs/file_table.c:384 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:297 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_CAN){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_CAN); lock(rtnl_mutex); lock(sk_lock-AF_CAN); *** DEADLOCK *** 1 lock held by syz-executor.0/14110: stack backtrace: CPU: 0 PID: 14110 Comm: syz-executor.0 Not tainted 6.5.0-rc1-syzkaller-00192-g78adb4bcf99e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 check_noncircular+0x311/0x3f0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x2e3d/0x5de0 kernel/locking/lockdep.c:5144 lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 lock_sock_nested+0x3a/0xf0 net/core/sock.c:3492 lock_sock include/net/sock.h:1708 [inline] raw_bind+0xb1/0xab0 net/can/raw.c:435 __sys_bind+0x1ec/0x220 net/socket.c:1792 __do_sys_bind net/socket.c:1803 [inline] __se_sys_bind net/socket.c:1801 [inline] __x64_sys_bind+0x72/0xb0 net/socket.c:1801 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd89007cb29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd890d2a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007fd89019bf80 RCX: 00007fd89007cb29 RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fd8900c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd89019bf80 R15: 00007ffebf8124f8 </TASK> Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: stable@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20230720114438.172434-1-edumazet@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17can: bcm: Fix UAF in bcm_proc_show()YueHaibing
BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80 Read of size 8 at addr ffff888155846230 by task cat/7862 CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xd5/0x150 print_report+0xc1/0x5e0 kasan_report+0xba/0xf0 bcm_proc_show+0x969/0xa80 seq_read_iter+0x4f6/0x1260 seq_read+0x165/0x210 proc_reg_read+0x227/0x300 vfs_read+0x1d5/0x8d0 ksys_read+0x11e/0x240 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x9e/0xa0 bcm_sendmsg+0x264b/0x44e0 sock_sendmsg+0xda/0x180 ____sys_sendmsg+0x735/0x920 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x161/0x1c0 slab_free_freelist_hook+0x119/0x220 __kmem_cache_free+0xb4/0x2e0 rcu_core+0x809/0x1bd0 bcm_op is freed before procfs entry be removed in bcm_release(), this lead to bcm_proc_show() may read the freed bcm_op. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230715092543.15548-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17can: raw: fix receiver memory leakZiyang Xuan
Got kmemleak errors with the following ltp can_filter testcase: for ((i=1; i<=100; i++)) do ./can_filter & sleep 0.1 done ============================================================== [<00000000db4a4943>] can_rx_register+0x147/0x360 [can] [<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw] [<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0 [<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70 [<00000000fd468496>] do_syscall_64+0x33/0x40 [<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 It's a bug in the concurrent scenario of unregister_netdevice_many() and raw_release() as following: cpu0 cpu1 unregister_netdevice_many(can_dev) unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this net_set_todo(can_dev) raw_release(can_socket) dev = dev_get_by_index(, ro->ifindex); // dev == NULL if (dev) { // receivers in dev_rcv_lists not free because dev is NULL raw_disable_allfilters(, dev, ); dev_put(dev); } ... ro->bound = 0; ... call_netdevice_notifiers(NETDEV_UNREGISTER, ) raw_notify(, NETDEV_UNREGISTER, ) if (ro->bound) // invalid because ro->bound has been set 0 raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed Add a net_device pointer member in struct raw_sock to record bound can_dev, and use rtnl_lock to serialize raw_socket members between raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use ro->dev to decide whether to free receivers in dev_rcv_lists. Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier") Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)David Howells
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22can: isotp: isotp_sendmsg(): fix return error fix on TX pathOliver Hartkopp
With commit d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") the missing correct return value in the case of a protocol error was introduced. But the way the error value has been read and sent to the user space does not follow the common scheme to clear the error after reading which is provided by the sock_error() function. This leads to an error report at the following write() attempt although everything should be working. Fixes: d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: avoid possible use-after-free when j1939_can_rx_register failsFedor Pchelkin
Syzkaller reports the following failure: BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline] BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 Write of size 4 at addr ffff888141c15058 by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x145/0x190 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374 __sk_destruct+0x4e/0x820 net/core/sock.c:1784 rcu_do_batch kernel/rcu/tree.c:2485 [inline] rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726 __do_softirq+0x289/0x9a3 kernel/softirq.c:298 asm_call_irq_on_stack+0x12/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:393 [inline] __irq_exit_rcu kernel/softirq.c:423 [inline] irq_exit_rcu+0x136/0x200 kernel/softirq.c:435 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635 Allocated by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] j1939_priv_create net/can/j1939/main.c:131 [inline] j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Freed by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0x170 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1542 [inline] slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576 slab_free mm/slub.c:3149 [inline] kfree+0xd9/0x3b0 mm/slub.c:4125 j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 It can be caused by this scenario: CPU0 CPU1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start() j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start() mutex_lock(&j1939_netdev_lock) j1939_priv_set(ndev0, priv) mutex_unlock(&j1939_netdev_lock) if (priv_new) kref_get(&priv_new->rx_kref) return priv_new; /* inside j1939_sk_bind() */ jsk->priv = priv j1939_can_rx_register(priv) // fails j1939_priv_set(ndev, NULL) kfree(priv) j1939_sk_sock_destruct() j1939_priv_put() // <- uaf To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so that a concurrent thread cannot process j1939_priv before j1939_can_rx_register() returns. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-3-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: change j1939_netdev_lock type to mutexFedor Pchelkin
It turns out access to j1939_can_rx_register() needs to be serialized, otherwise j1939_priv can be corrupted when parallel threads call j1939_netdev_start() and j1939_can_rx_register() fails. This issue is thoroughly covered in other commit which serializes access to j1939_can_rx_register(). Change j1939_netdev_lock type to mutex so that we do not need to remove GFP_KERNEL from can_rx_register(). j1939_netdev_lock seems to be used in normal contexts where mutex usage is not prohibited. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526171910.227615-2-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-05can: j1939: j1939_sk_send_loop_abort(): improved error queue handling in ↵Oleksij Rempel
J1939 Socket This patch addresses an issue within the j1939_sk_send_loop_abort() function in the j1939/socket.c file, specifically in the context of Transport Protocol (TP) sessions. Without this patch, when a TP session is initiated and a Clear To Send (CTS) frame is received from the remote side requesting one data packet, the kernel dispatches the first Data Transport (DT) frame and then waits for the next CTS. If the remote side doesn't respond with another CTS, the kernel aborts due to a timeout. This leads to the user-space receiving an EPOLLERR on the socket, and the socket becomes active. However, when trying to read the error queue from the socket with sock.recvmsg(, , socket.MSG_ERRQUEUE), it returns -EAGAIN, given that the socket is non-blocking. This situation results in an infinite loop: the user-space repeatedly calls epoll(), epoll() returns the socket file descriptor with EPOLLERR, but the socket then blocks on the recv() of ERRQUEUE. This patch introduces an additional check for the J1939_SOCK_ERRQUEUE flag within the j1939_sk_send_loop_abort() function. If the flag is set, it indicates that the application has subscribed to receive error queue messages. In such cases, the kernel can communicate the current transfer state via the error queue. This allows for the function to return early, preventing the unnecessary setting of the socket into an error state, and breaking the infinite loop. It is crucial to note that a socket error is only needed if the application isn't using the error queue, as, without it, the application wouldn't be aware of transfer issues. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: David Jander <david@protonic.nl> Tested-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230526081946.715190-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-05-11 10:44:31 +0000