summaryrefslogtreecommitdiff
path: root/net/wireless/core.h
AgeCommit message (Collapse)Author
2025-03-11wifi: cfg80211: move link reconfig parameters into a structJohannes Berg
Add a new struct cfg80211_ml_reconf_req to collect the link reconfiguration parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.0cf299c1fdd0.Id1a3b1092dc52d0d3731a8798522fdf2e052bf0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-26wifi: cfg80211: expose update timestamp to driversBenjamin Berg
This information is exposed to userspace but not drivers. Make this field public so that drivers are also able to access it. The information is for example useful for link selection to determine whether the BSS corresponding to an MLO link has been seen in a recent scan. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: cfg80211: Add support for dynamic addition/removal of linksIlan Peer
Add support for requesting dynamic addition/removal of links to the current MLO association. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: cfg80211: pass net_device to .set_monitor_channelFelix Fietkau
Preparation for allowing multiple monitor interfaces with different channels on a multi-radio wiphy. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/35fa652dbfebf93343f8b9a08fdef0467a2a02dc.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: skip indicating signal for per-STA profile BSSsVeerendranath Jakkam
Currently signal of the BSS entry generated from the per-STA profile indicated as zero, but userspace may consider it as high signal strength since 0 dBm is a valid RSSI value. To avoid this don't report the signal to userspace when the BSS entry created from a per-STA profile. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://patch.msgid.link/20240904030917.3602369-3-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: make BSS source types publicVeerendranath Jakkam
Define public enum with BSS source types in core.h. Upcoming patches need this to store BSS source type in struct cfg80211_internal_bss. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://patch.msgid.link/20240904030917.3602369-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: cfg80211: refactor 6 GHz AP power type parsingJohannes Berg
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz power type from a given set of elements, which is now only inside cfg80211_6ghz_power_type_valid(). Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: mac80211: refactor channel checksJohannes Berg
To later introduce an override for VLP APs being allowed despite NO-IR flags, which is somewhat similar in construction to being allowed to monitor on disabled channels, refactor the code that checks channel flags to have not a 'monitor' argument but a set of 'permitting' flags that permit the operation without checking for 'prohibited' flags. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: cfg80211: optionally support monitor on disabled channelsJohannes Berg
If the hardware supports a disabled channel, it may in some cases be possible to use monitor mode (without any transmit) on it when it's otherwise disabled. Add a new channel flag IEEE80211_CHAN_CAN_MONITOR that makes it possible for a driver to indicate such a thing. Make it per channel so drivers could have a choice with it, perhaps it's only possible on some channels, perhaps some channels are not supported at all, but still there and marked disabled. In _nl80211_parse_chandef() simplify the code and check only for an unknown channel, _cfg80211_chandef_usable() will later check for IEEE80211_CHAN_DISABLED anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206164849.87fad3a21a09.I9116b2fdc2e2c9fd59a9273a64db7fcb41fc0328@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsingBenjamin Berg
Test a few things around parsing of 6 GHz colocated APs to e.g. ensure that we are not going to scan for a disabled (affiliated) AP. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20240129220918.079dc50ab43b.Ide898d9f1d4c26d7e774d6fd0ec57766967d6572@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: cfg80211: validate MLO connections betterJohannes Berg
When going into an MLO connection, validate that the link IDs match what userspace indicated, and that the AP MLD addresses and capabilities are all matching between the links. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240102213313.ff83c034cb9a.I9962db0bfa8c73b37b8d5b59a3fad7f02f2129ae@changeid [roll in extra fix from Miri to actually check the return value] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-03wifi: cfg80211: tests: add some scanning related testsBenjamin Berg
This adds some scanning related tests, mainly exercising the ML element parsing and inheritance. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://msgid.link/20231220151952.415232-7-benjamin@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-18Merge tag 'wireless-next-2023-12-18' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12wifi: cfg80211: add BSS usage reportingJohannes Berg
Sometimes there may be reasons for which a BSS that's actually found in scan cannot be used to connect to, for example a nonprimary link of an NSTR mobile AP MLD cannot be used for normal direct connections to it. Not indicating these to userspace as we do now of course avoids being able to connect to them, but it's better if they're shown to userspace and it can make an appropriate decision, without e.g. doing an additional ML probe. Thus add an indication of what a BSS can be used for, currently "normal" and "MLD link", including a reason bitmap for it being not usable. The latter can be extended later for certain BSSes if there are other reasons they cannot be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24wifi: cfg80211: fix CQM for non-range useJohannes Berg
My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: cfg80211: Allow AP/P2PGO to indicate port authorization to peer ↵Vinayak Yadawad
STA/P2PClient In 4way handshake offload, cfg80211_port_authorized enables driver to indicate successful 4way handshake to cfg80211 layer. Currently this path of port authorization is restricted to interface type NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO interfaces to authorize peer STA/P2P_CLIENT, whenever authentication is offloaded on the AP/P2P_GO interface. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-06Merge wireless into wireless-nextJohannes Berg
Resolve several conflicts, mostly between changes/fixes in wireless and the locking rework in wireless-next. One of the conflicts actually shows a bug in wireless that we'll want to fix separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org>
2023-09-13wifi: cfg80211: export DFS CAC time and usable state helper functionsAditya Kumar Singh
cfg80211 has cfg80211_chandef_dfs_usable() function to know whether at least one channel in the chandef is in usable state or not. Also, cfg80211_chandef_dfs_cac_time() function is there which tells the CAC time required for the given chandef. Make these two functions visible to drivers by exporting their symbol to global list of kernel symbols. Lower level drivers can make use of these two functions to be aware if CAC is required on the given chandef and for how long. For example drivers which maintains the CAC state internally can make use of these. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230912051857.2284-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: fix cqm_config access raceJohannes Berg
Max Schulze reports crashes with brcmfmac. The reason seems to be a race between userspace removing the CQM config and the driver calling cfg80211_cqm_rssi_notify(), where if the data is freed while cfg80211_cqm_rssi_notify() runs it will crash since it assumes wdev->cqm_config is set. This can't be fixed with a simple non-NULL check since there's nothing we can do for locking easily, so use RCU instead to protect the pointer, but that requires pulling the updates out into an asynchronous worker so they can sleep and call back into the driver. Since we need to change the free anyway, also change it to go back to the old settings if changing the settings fails. Reported-and-tested-by: Max Schulze <max.schulze@online.de> Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: remove wdev mutexJohannes Berg
Since we're now protecting everything with the wiphy mutex (and were really using it for almost everything before), there's no longer any real reason to have a separate wdev mutex. It may feel better, but really has no value. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: check wiphy mutex is held for wdev mutexJohannes Berg
This might seem pretty pointless rather than changing the locking immediately, but it seems safer to run for a while with checks and the old locking scheme, and then remove the wdev lock later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: add flush functions for wiphy workJohannes Berg
There may be sometimes reasons to actually run the work if it's pending, add flush functions for both regular and delayed wiphy work that will do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: check RTNL when iterating devicesJohannes Berg
Add a new "for_each_rdev()" macro and check that we hold the RTNL when calling it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-22wifi: cfg80211: Annotate struct cfg80211_cqm_config with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct cfg80211_cqm_config. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230817211531.4193219-2-keescook@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removalVeerendranath Jakkam
STA MLD setup links may get removed if AP MLD remove the corresponding affiliated APs with Multi-Link reconfiguration as described in P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently, there is no support to notify such operation to cfg80211 and userspace. Add support for the drivers to indicate STA MLD setup links removal to cfg80211 and notify the same to userspace. Upon receiving such indication from the driver, clear the MLO links information of the removed links in the WDEV. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com [rename function and attribute, fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07wifi: cfg80211: move scan done work to wiphy workJohannes Berg
Move the scan done work to the new wiphy work to simplify the code a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07wifi: cfg80211: move sched scan stop to wiphy workJohannes Berg
This work can now trivially be converted, it behaves identical either way. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07wifi: cfg80211: add a work abstraction with special semanticsJohannes Berg
Add a work abstraction at the cfg80211 level that will always hold the wiphy_lock() for any work executed and therefore also can be canceled safely (without waiting) while holding that. This improves on what we do now as with the new wiphy works we don't have to worry about locking while cancelling them safely. Also, don't let such works run while the device is suspended, since they'll likely need to interact with the device. Flush them before suspend though. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-18wifi: cfg80211: remove support for static WEPJohannes Berg
This reverts commit b8676221f00d ("cfg80211: Add support for static WEP in the driver") since no driver ever ended up using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: clean up links appropriatelyJohannes Berg
This was missing earlier, we need to remove links when interfaces are being destroyed, and we also need to stop (AP) operations when a link is being destroyed. Address these issues to remove many warnings that will otherwise appear in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: remove BSS pointer from cfg80211_disassoc_requestJohannes Berg
The race described by the comment in mac80211 hasn't existed since the locking rework to use the same lock and for MLO we need to pass the AP MLD address, so just pass the BSSID or AP MLD address instead of the BSS struct pointer, and adjust all the code accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: simplify cfg80211_mlme_auth() prototypeJohannes Berg
This function has far too many parameters now, move out the BSS lookup and pass the request struct instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: mlme: get BSS entry outside cfg80211_mlme_assoc()Johannes Berg
Today it makes more sense to pass the necessary parameters to look up the BSS entry to cfg80211_mlme_assoc(), but with MLO we will need to look up multiple, and that gets awkward. Pull the lookup code into the callers so we can change it better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04cfg80211: remove cfg80211_get_chan_state()Johannes Berg
We haven't used this function for years, since commit c781944b71f8 ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()") which itself removed a function unused since commit 97dc94f1d933 ("cfg80211: remove channel_switch combination check"), almost eight years ago. Also remove the now unused enum cfg80211_chan_mode and some struct members that were only used for this function. Link: https://lore.kernel.org/r/20220412220958.1a191dca19d7.Ide4448f02d0e2f1ca2992971421ffc1933a5370a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid ↵Lorenzo Bianconi
confusion with ETSI standard ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: move offchan_cac_event to a dedicated workLorenzo Bianconi
In order to make cfg80211_offchan_cac_abort() (renamed from cfg80211_offchan_cac_event) callable in other contexts and without so much locking restrictions, make it trigger a new work instead of operating directly. Do some other renames while at it to clarify. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org [rewrite commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19cfg80211: implement APIs for dedicated radar detection HWLorenzo Bianconi
If a dedicated (off-channel) radar detection hardware (chain) is available in the hardware/driver, allow this to be used by calling the NL80211_CMD_RADAR_DETECT command with a new flag attribute requesting off-channel radar detection is used. Offchannel CAC (channel availability check) avoids the CAC downtime when switching to a radar channel or when turning on the AP. Drivers advertise support for this using the new feature flag NL80211_EXT_FEATURE_RADAR_OFFCHAN. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org [remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(), remove gfp_t argument, fix documentation, fix tracing] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25cfg80211: fix management registrations lockingJohannes Berg
The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: expose the rfkill device to the low level driverEmmanuel Grumbach
This will allow the low level driver to query the rfkill state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: validate key indexes for cfg80211_registered_deviceAnant Thazhemadam
syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30cfg80211: initialize wdev data earlierJohannes Berg
There's a race condition in the netdev registration in that NETDEV_REGISTER actually happens after the netdev is available, and so if we initialize things only there, we might get called with an uninitialized wdev through nl80211 - not using a wdev but using a netdev interface index. I found this while looking into a syzbot report, but it doesn't really seem to be related, and unfortunately there's no repro for it (yet). I can't (yet) explain how it managed to get into cfg80211_release_pmsr() from nl80211_netlink_notify() without the wdev having been initialized, as the latter only iterates the wdevs that are linked into the rdev, which even without the change here happened after init. However, looking at this, it seems fairly clear that the init needs to be done earlier, otherwise we might even re-init on a netns move, when data might still be pending. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20201009135821.fdcbba3aad65.Ie9201d91dbcb7da32318812effdc1561aeaf4cdc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: wireless: delete duplicated word + fix grammarRandy Dunlap
Drop the repeated word "Return" + fix verb. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-4-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05cfg80211: fix management registrations deadlockJohannes Berg
Lockdep reports that we may deadlock because we take the RTNL on the work struct, but flush it under RTNL. Clearly, it's correct. In practice, this can happen when doing rfkill on an active device. Fix this by moving the work struct to the wiphy (registered dev) layer, and iterate over all the wdevs inside there. This then means we need to track which one of them has work to do, so we don't update to the driver for all wdevs all the time. Also fix a locking bug I noticed while working on this - the registrations list is iterated as if it was an RCU list, but it isn't handle that way - and we need to lock now for the update flag anyway, so remove the RCU. Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-and-tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: support multicast RX registrationJohannes Berg
For DPP, there's a need to receive multicast action frames, but many drivers need a special filter configuration for this. Support announcing from userspace in the management registration that multicast RX is required, with an extended feature flag if the driver handles this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-05-12 22:57:34 +0000