diff options
| author | Heiko Stuebner <heiko@sntech.de> | 2024-07-23 21:55:26 +0200 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2024-07-30 09:06:59 +0200 |
| commit | 0f5f87a1d602a33028522784eb005647fa1b5c11 (patch) | |
| tree | fe8e55b484e36f74ba20123463049b9e32e24a0f | |
| parent | e0ec6d48226fb3d4df18895b56f0b7a94c0fe474 (diff) | |
arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433
The TS433 uses both pcie controllers for sata and the 2nd network
interface. Set the needed data-lanes in the pcie3 phy and enable
the second pcie controller, as well as remove the bifurcation comment.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-3-heiko@sntech.de
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 07b4f095d766..9bf9c3b65ca3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -78,17 +78,25 @@ }; &pcie30phy { + data-lanes = <1 2>; status = "okay"; }; /* Connected to a JMicron AHCI SATA controller */ &pcie3x1 { - /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; +/* Connected to the 2.5G NIC for the upper network jack */ +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; |