Merge tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT core:

   - Fix ref counting errors in interrupt parsing code

   - Allow "nonposted-mmio" property per device and on non-Apple h/w

   - Use typed accessors in platform driver code

   - Fix mismatch between DT MAX_PHANDLE_ARGS and
     NR_FWNODE_REFERENCE_ARGS and increase the maximum number args

   - Rework of_resolve_phandles() to use __free() cleanup and fix ref
     count error

   - Use of_prop_cmp() in a few more places

   - Improve make_fit.py script error handling

  DT bindings:

   - Update DT property ordering rules for properties within groups
     (i.e. common suffix)

   - Update DT submitting-patches doc to cover sending .dts patches and
     SoC maintainer rules on being warning free against linux-next

   - Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
     max20751 to trivial devices

   - Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
     Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.

   - Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
     bindings to split child node properties. Fix the LAN9115 binding to
     use the child node schema so all properties are documented.

   - Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema

   - Fix some issues with LVDS display panels causing validation
     warnings

   - Drop some obsolete parts of Xilinx bindings"

* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
  scripts/make_fit: Print DT name before libfdt errors
  dt-bindings: edac: altera: socfpga: Convert to YAML
  dt-bindings: pps: gpio: Correct indentation and style in DTS example
  media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
  of: address: Allow to specify nonposted-mmio per-device
  of: address: Expand nonposted-mmio to non-Apple Silicon platforms
  docs: dt-bindings: Specify ordering for properties within groups
  dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
  of: Move of_prop_val_eq() next to the single user
  of/platform: Use typed accessors rather than of_get_property()
  dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
  dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
  dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
  dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
  dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
  dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
  dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
  docs: process: maintainer-soc-clean-dts: linux-next is decisive
  docs: dt: submitting-patches: Document sending DTS patches
  of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
  ...

36 files changed, 766 insertions, 709 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 6ceeed76e88e..0487bbffd7f7 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -41,6 +41,7 @@ properties:
           - enum:
               - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+              - ti,sn65lvds822  # For the SN65LVDS822 FlatLink LVDS Receiver
               - ti,sn65lvds94 # For the SN65DS94 LVDS serdes
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index 3623ffa6518d..96621b89ae9e 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -33,7 +33,9 @@ properties:
     description: Reference to the regulator powering the panel VCC pins.
 
   data-mapping:
-    const: jeida-24
+    enum:
+      - jeida-18
+      - jeida-24
 
   width-mm:
     const: 210
@@ -41,6 +43,7 @@ properties:
   height-mm:
     const: 158
 
+  backlight: true
   panel-timing: true
   port: true
 
@@ -48,7 +51,6 @@ additionalProperties: false
 
 required:
   - compatible
-  - vcc-supply
   - data-mapping
   - width-mm
   - height-mm
diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst
index 4772ded8a987..202acac0507a 100644
--- a/Documentation/devicetree/bindings/dts-coding-style.rst
+++ b/Documentation/devicetree/bindings/dts-coding-style.rst
@@ -133,6 +133,9 @@ The above-described ordering follows this approach:
 3. Status is the last information to annotate that device node is or is not
    finished (board resources are needed).
 
+The individual properties inside each group shall use natural sort order by
+the property name.
+
 Example::
 
 	/* SoC DTSI */
@@ -158,7 +161,10 @@ Example::
 	/* Board DTS */
 
 	&device_node {
-		vdd-supply = <&board_vreg1>;
+		vdd-0v9-supply = <&board_vreg1>;
+		vdd-1v8-supply = <&board_vreg4>;
+		vdd-3v3-supply = <&board_vreg2>;
+		vdd-12v-supply = <&board_vreg3>;
 		status = "okay";
 	}
 
diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
new file mode 100644
index 000000000000..ec4634c5fa89
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
@@ -0,0 +1,323 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/altr,socfpga-ecc-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SoCFPGA ECC Manager
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@altera.com>
+
+description:
+  This binding describes the device tree nodes required for the Altera SoCFPGA
+  ECC Manager for the Cyclone5, Arria5, Arria10, Stratix10, and Agilex chip
+  families.
+
+properties:
+
+  compatible:
+    oneOf:
+      - items:
+          - const: altr,socfpga-s10-ecc-manager
+          - const: altr,socfpga-a10-ecc-manager
+      - const: altr,socfpga-a10-ecc-manager
+      - const: altr,socfpga-ecc-manager
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ranges: true
+
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to Stratix10 System Manager Block with the ECC manager registers
+
+  sdramedac:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - altr,sdram-edac-a10
+          - altr,sdram-edac-s10
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,sdr-syscon:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SDRAM parent
+
+    required:
+      - compatible
+      - interrupts
+      - altr,sdr-syscon
+
+patternProperties:
+  "^ocram-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-ocram-ecc
+              - const: altr,socfpga-a10-ocram-ecc
+          - const: altr,socfpga-a10-ocram-ecc
+          - const: altr,socfpga-ocram-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      iram:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to OCRAM parent
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to OCRAM parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+  "^usb[0-9]-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-usb-ecc
+              - const: altr,socfpga-usb-ecc
+          - const: altr,socfpga-usb-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to USB parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^emac[0-9]-[t,r]x-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-eth-mac-ecc
+              - const: altr,socfpga-eth-mac-ecc
+          - const: altr,socfpga-eth-mac-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to ethernet parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^sdmmc[a-f]-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-sdmmc-ecc
+              - const: altr,socfpga-sdmmc-ecc
+          - const: altr,socfpga-sdmmc-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 2
+        maxItems: 4
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SD/MMC parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^l2-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - altr,socfpga-a10-l2-ecc
+          - altr,socfpga-l2-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 2
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+  "^dma-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: altr,socfpga-dma-ecc
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SD/MMC parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: altr,socfpga-ecc-manager
+then:
+  required:
+    - compatible
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
+
+else:
+  required:
+    - compatible
+    - "#address-cells"
+    - "#size-cells"
+    - interrupts
+    - interrupt-controller
+    - "#interrupt-cells"
+    - ranges
+    - altr,sysmgr-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    eccmgr {
+        compatible = "altr,socfpga-s10-ecc-manager",
+                     "altr,socfpga-a10-ecc-manager";
+        altr,sysmgr-syscon = <&sysmgr>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        ranges;
+
+        sdramedac {
+            compatible = "altr,sdram-edac-s10";
+            altr,sdr-syscon = <&sdr>;
+            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        ocram-ecc@ff8cc000 {
+            compatible = "altr,socfpga-s10-ocram-ecc",
+                         "altr,socfpga-a10-ocram-ecc";
+            reg = <0xff8cc000 0x100>;
+            altr,ecc-parent = <&ocram>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        usb0-ecc@ff8c4000 {
+            compatible = "altr,socfpga-s10-usb-ecc",
+                         "altr,socfpga-usb-ecc";
+            reg = <0xff8c4000 0x100>;
+            altr,ecc-parent = <&usb0>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        emac0-rx-ecc@ff8c0000 {
+            compatible = "altr,socfpga-s10-eth-mac-ecc",
+                         "altr,socfpga-eth-mac-ecc";
+            reg = <0xff8c0000 0x100>;
+            altr,ecc-parent = <&gmac0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        emac0-tx-ecc@ff8c0400 {
+            compatible = "altr,socfpga-s10-eth-mac-ecc",
+                         "altr,socfpga-eth-mac-ecc";
+            reg = <0xff8c0400 0x100>;
+            altr,ecc-parent = <&gmac0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        sdmmca-ecc@ff8c8c00 {
+            compatible = "altr,socfpga-s10-sdmmc-ecc",
+                         "altr,socfpga-sdmmc-ecc";
+            reg = <0xff8c8c00 0x100>;
+            altr,ecc-parent = <&mmc>;
+            interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+                         <15 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
deleted file mode 100644
index 8f52206cfd2a..000000000000
--- a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-Altera SoCFPGA ECC Manager
-This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
-The ECC Manager counts and corrects single bit errors and counts/handles
-double bit errors which are uncorrectable.
-
-Cyclone5 and Arria5 ECC Manager
-Required Properties:
-- compatible : Should be "altr,socfpga-ecc-manager"
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
-
-On Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-ocram-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- iram : phandle to On-Chip RAM definition.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
-
-Example:
-
-	eccmgr: eccmgr@ffd08140 {
-		compatible = "altr,socfpga-ecc-manager";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		l2-ecc@ffd08140 {
-			compatible = "altr,socfpga-l2-ecc";
-			reg = <0xffd08140 0x4>;
-			interrupts = <0 36 1>, <0 37 1>;
-		};
-
-		ocram-ecc@ffd08144 {
-			compatible = "altr,socfpga-ocram-ecc";
-			reg = <0xffd08144 0x4>;
-			iram = <&ocram>;
-			interrupts = <0 178 1>, <0 179 1>;
-		};
-	};
-
-Arria10 SoCFPGA ECC Manager
-The Arria10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register instead of individual IRQs like the Cyclone5
-and Arria5. Therefore the device tree is different as well.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ecc-manager"
-- altr,sysgr-syscon : phandle to Arria10 System Manager Block
-	containing the ECC manager registers.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ocram-ecc"
-- reg        : Address and size for ECC block registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-eth-mac-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-NAND FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-nand-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-DMA FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-dma-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-USB FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-usb-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-QSPI FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-qspi-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent QSPI node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-sdmmc-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order for port A, and then single bit error interrupt,
-	then double bit error interrupt in this order for port B.
-
-Example:
-
-	eccmgr: eccmgr@ffd06000 {
-		compatible = "altr,socfpga-a10-ecc-manager";
-		altr,sysmgr-syscon = <&sysmgr>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ranges;
-
-		l2-ecc@ffd06010 {
-			compatible = "altr,socfpga-a10-l2-ecc";
-			reg = <0xffd06010 0x4>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
-				     <32 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ocram-ecc@ff8c3000 {
-			compatible = "altr,socfpga-a10-ocram-ecc";
-			reg = <0xff8c3000 0x90>;
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
-				     <33 IRQ_TYPE_LEVEL_HIGH> ;
-		};
-
-		emac0-rx-ecc@ff8c0800 {
-			compatible = "altr,socfpga-eth-mac-ecc";
-			reg = <0xff8c0800 0x400>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
-				     <36 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-tx-ecc@ff8c0c00 {
-			compatible = "altr,socfpga-eth-mac-ecc";
-			reg = <0xff8c0c00 0x400>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
-				     <37 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-buf-ecc@ff8c2000 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2000 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
-				     <43 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-rd-ecc@ff8c2400 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2400 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
-				     <45 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-wr-ecc@ff8c2800 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2800 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
-				     <44 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma-ecc@ff8c8000 {
-			compatible = "altr,socfpga-dma-ecc";
-			reg = <0xff8c8000 0x400>;
-			altr,ecc-parent = <&pdma>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
-				     <42 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb0-ecc@ff8c8800 {
-			compatible = "altr,socfpga-usb-ecc";
-			reg = <0xff8c8800 0x400>;
-			altr,ecc-parent = <&usb0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
-				     <34 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		qspi-ecc@ff8c8400 {
-			compatible = "altr,socfpga-qspi-ecc";
-			reg = <0xff8c8400 0x400>;
-			altr,ecc-parent = <&qspi>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-				     <46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdmmc-ecc@ff8c2c00 {
-			compatible = "altr,socfpga-sdmmc-ecc";
-			reg = <0xff8c2c00 0x400>;
-			altr,ecc-parent = <&mmc>;
-			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-				     <47 IRQ_TYPE_LEVEL_HIGH>,
-				     <16 IRQ_TYPE_LEVEL_HIGH>,
-				     <48 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-Stratix10 SoCFPGA ECC Manager (ARM64)
-The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register similar to the Arria10. However, Stratix10 ECC
-requires access to registers that can only be read from Secure Monitor
-with SMC calls. Therefore the device tree is slightly different. Note
-that only 1 interrupt is sent in Stratix10 because the double bit errors
-are treated as SErrors in ARM64 instead of IRQs in ARM32.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-ecc-manager"
-- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
-	              containing the ECC manager registers.
-- interrupts : Should be single bit error interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-SDRAM ECC
-Required Properties:
-- compatible : Should be "altr,sdram-edac-s10"
-- interrupts : Should be single bit error interrupt.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-ocram-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent OCRAM node.
-- interrupts      : Should be single bit error interrupt.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts      : Should be single bit error interrupt.
-
-NAND FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-nand-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts      : Should be single bit error interrupt.
-
-DMA FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-dma-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts      : Should be single bit error interrupt.
-
-USB FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-usb-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts      : Should be single bit error interrupt.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts      : Should be single bit error interrupt for port A
-		    and then single bit error interrupt for port B.
-
-Example:
-
-	eccmgr {
-		compatible = "altr,socfpga-s10-ecc-manager";
-		altr,sysmgr-syscon = <&sysmgr>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <0 15 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ranges;
-
-		sdramedac {
-			compatible = "altr,sdram-edac-s10";
-			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ocram-ecc@ff8cc000 {
-			compatible = "altr,socfpga-s10-ocram-ecc";
-			reg = <ff8cc000 0x100>;
-			altr,ecc-parent = <&ocram>;
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-rx-ecc@ff8c0000 {
-			compatible = "altr,socfpga-s10-eth-mac-ecc";
-			reg = <0xff8c0000 0x100>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-tx-ecc@ff8c0400 {
-			compatible = "altr,socfpga-s10-eth-mac-ecc";
-			reg = <0xff8c0400 0x100>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
-		};
-
-		nand-buf-ecc@ff8c8000 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8000 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-rd-ecc@ff8c8400 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8400 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-wr-ecc@ff8c8800 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8800 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma-ecc@ff8c9000 {
-			compatible = "altr,socfpga-s10-dma-ecc";
-			reg = <0xff8c9000 0x100>;
-			altr,ecc-parent = <&pdma>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb0-ecc@ff8c4000 {
-			compatible = "altr,socfpga-s10-usb-ecc";
-			reg = <0xff8c4000 0x100>;
-			altr,ecc-parent = <&usb0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdmmc-ecc@ff8c8c00 {
-			compatible = "altr,socfpga-s10-sdmmc-ecc";
-			reg = <0xff8c8c00 0x100>;
-			altr,ecc-parent = <&mmc>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-				     <15 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
index 8cd14a70bedf..b106f5212ea9 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - ibm,fsi2pib
       - ibm,p9-scom
       - ibm,i2cr-scom
 
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index fc8e82cb28a9..019bd28a29f1 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -17,6 +17,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - allwinner,sun50i-h616-mali
               - amlogic,meson-g12a-mali
               - mediatek,mt8183-mali
               - mediatek,mt8183b-mali
@@ -24,6 +25,7 @@ properties:
               - realtek,rtd1619-mali
               - renesas,r9a07g044-mali
               - renesas,r9a07g054-mali
+              - renesas,r9a09g057-mali
               - rockchip,px30-mali
               - rockchip,rk3562-mali
               - rockchip,rk3568-mali
@@ -143,6 +145,7 @@ allOf:
             enum:
               - renesas,r9a07g044-mali
               - renesas,r9a07g054-mali
+              - renesas,r9a09g057-mali
     then:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 0801da33a385..48daba21a890 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -47,10 +47,13 @@ properties:
           - const: arm,mali-t760
       - items:
           - enum:
+              - samsung,exynos7870-mali
+          - const: arm,mali-t830
+      - items:
+          - enum:
               - rockchip,rk3399-mali
           - const: arm,mali-t860
 
-          # "arm,mali-t830"
           # "arm,mali-t880"
 
   reg:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
deleted file mode 100644
index 0bfb3ba55f4c..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
-
-Required properties:
-- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
-- reg: should contain IC registers location and length.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: the number of cells to define an interrupt, should be 2.
-  The first cell is the IRQ number, the second cell is used to specify
-  one of the supported IRQ types:
-      IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
-      IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
-      IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
-      IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
-  Reset value is IRQ_TYPE_LEVEL_LOW.
-
-Optional properties:
-- interrupts: empty for MIC interrupt controller, cascaded MIC
-  hardware interrupts for SIC1 and SIC2
-
-Examples:
-
-	/* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
-	mic: interrupt-controller@40008000 {
-		compatible = "nxp,lpc3220-mic";
-		reg = <0x40008000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sic1: interrupt-controller@4000c000 {
-		compatible = "nxp,lpc3220-sic";
-		reg = <0x4000c000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&mic>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
-			     <30 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	sic2: interrupt-controller@40010000 {
-		compatible = "nxp,lpc3220-sic";
-		reg = <0x40010000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&mic>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	/* ADC */
-	adc@40048000 {
-		compatible = "nxp,lpc3220-adc";
-		reg = <0x40048000 0x1000>;
-		interrupt-parent = <&sic1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
new file mode 100644
index 000000000000..724c869e3c40
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nxp,lpc3220-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,lpc3220-mic
+      - nxp,lpc3220-sic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    items:
+      - description: Regular interrupt request
+      - description: Fast interrupt request
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,lpc3220-sic
+    then:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mic: interrupt-controller@40008000 {
+        compatible = "nxp,lpc3220-mic";
+        reg = <0x40008000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    interrupt-controller@4000c000 {
+        compatible = "nxp,lpc3220-sic";
+        reg = <0x4000c000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&mic>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+                    <30 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index 110e8f5f1f9e..ebc615584f92 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -41,10 +41,6 @@ properties:
     minItems: 1
     maxItems: 5
 
-  assigned-clocks: true
-
-  assigned-clock-parents: true
-
   iommus:
     minItems: 1
     maxItems: 32
@@ -78,8 +74,6 @@ required:
   - clocks
   - clock-names
   - iommus
-  - assigned-clocks
-  - assigned-clock-parents
 
 allOf:
   - if:
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index a5598ade399f..1578514ec58d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -38,50 +38,16 @@ properties:
 patternProperties:
   "^.*@[0-3],[a-f0-9]+$":
     type: object
+    $ref: mc-peripheral-props.yaml#
     additionalProperties: true
-    description:
-      The actual device nodes should be added as subnodes to the SROMc node.
-      These subnodes, in addition to regular device specification, should
-      contain the following properties, describing configuration
-      of the relevant SROM bank.
 
     properties:
-      reg:
-        description:
-          Bank number, base address (relative to start of the bank) and size
-          of the memory mapped for the device. Note that base address will be
-          typically 0 as this is the start of the bank.
-        maxItems: 1
-
       reg-io-width:
         enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
 
-      samsung,srom-page-mode:
-        description:
-          If page mode is set, 4 data page mode will be configured,
-          else normal (1 data) page mode will be set.
-        type: boolean
-
-      samsung,srom-timing:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 6
-        description: |
-          Array of 6 integers, specifying bank timings in the following order:
-          Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
-          Each value is specified in cycles and has the following meaning
-          and valid range:
-          Tacp: Page mode access cycle at Page mode (0 - 15)
-          Tcah: Address holding time after CSn (0 - 15)
-          Tcoh: Chip selection hold on OEn (0 - 15)
-          Tacc: Access cycle (0 - 31, the actual time is N + 1)
-          Tcos: Chip selection set-up before OEn (0 - 15)
-          Tacs: Address set-up before CSn (0 - 15)
-
     required:
-      - reg
       - samsung,srom-timing
 
 required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 00deeb09f87d..73a6dac946b7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -36,6 +36,8 @@ allOf:
   - $ref: st,stm32-fmc2-ebi-props.yaml#
   - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
+  - $ref: qcom,ebi2-peripheral-props.yaml#
+  - $ref: samsung,exynos4210-srom-peripheral-props.yaml#
   - $ref: ti,gpmc-child.yaml#
   - $ref: fsl/fsl,imx-weim-peripherals.yaml
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
new file mode 100644
index 000000000000..29f8c30e8a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/qcom,ebi2-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral Properties for Qualcomm External Bus Interface 2 (EBI2)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  # SLOW chip selects
+  qcom,xmem-recovery-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The time the memory continues to drive the data bus after OE
+      is de-asserted, in order to avoid contention on the data bus.
+      They are inserted when reading one CS and switching to another
+      CS or read followed by write on the same CS. Minimum value is
+      actually 1, so a value of 0 will still yield 1 recovery cycle.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-write-hold-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The extra cycles inserted after every write minimum 1. The
+      data out is driven from the time WE is asserted until CS is
+      asserted. With a hold of 1 (value = 0), the CS stays active
+      for 1 extra cycle, etc.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-write-delta-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The initial latency for write cycles inserted for the first
+      write to a page or burst memory.
+    minimum: 0
+    maximum: 255
+
+  qcom,xmem-read-delta-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The initial latency for read cycles inserted for the first
+      read to a page or burst memory.
+    minimum: 0
+    maximum: 255
+
+  qcom,xmem-write-wait-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of wait cycles for every write access.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-read-wait-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of wait cycles for every read access.
+    minimum: 0
+    maximum: 15
+
+
+  # FAST chip selects
+  qcom,xmem-address-hold-enable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Holds the address for an extra cycle to meet hold time
+      requirements with ADV assertion, when set to 1.
+    enum: [ 0, 1 ]
+
+  qcom,xmem-adv-to-oe-recovery-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of cycles elapsed before an OE assertion, with
+      respect to the cycle where ADV (address valid) is asserted.
+    minimum: 0
+    maximum: 3
+
+  qcom,xmem-read-hold-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The length in cycles of the first segment of a read transfer.
+      For a single read transfer this will be the time from CS
+      assertion to OE assertion.
+    minimum: 0
+    maximum: 15
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2.yaml
index 1b1fb3538e6e..423d7a75134f 100644
--- a/Documentation/devicetree/bindings/bus/qcom,ebi2.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bus/qcom,ebi2.yaml#
+$id: http://devicetree.org/schemas/memory-controllers/qcom,ebi2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm External Bus Interface 2 (EBI2)
@@ -104,91 +104,8 @@ required:
 patternProperties:
   "^.*@[0-5],[0-9a-f]+$":
     type: object
+    $ref: mc-peripheral-props.yaml#
     additionalProperties: true
-    properties:
-      reg:
-        maxItems: 1
-
-      # SLOW chip selects
-      qcom,xmem-recovery-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The time the memory continues to drive the data bus after OE
-          is de-asserted, in order to avoid contention on the data bus.
-          They are inserted when reading one CS and switching to another
-          CS or read followed by write on the same CS. Minimum value is
-          actually 1, so a value of 0 will still yield 1 recovery cycle.
-        minimum: 0
-        maximum: 15
-
-      qcom,xmem-write-hold-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The extra cycles inserted after every write minimum 1. The
-          data out is driven from the time WE is asserted until CS is
-          asserted. With a hold of 1 (value = 0), the CS stays active
-          for 1 extra cycle, etc.
-        minimum: 0
-        maximum: 15
-
-      qcom,xmem-write-delta-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The initial latency for write cycles inserted for the first
-          write to a page or burst memory.
-        minimum: 0
-        maximum: 255
-
-      qcom,xmem-read-delta-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The initial latency for read cycles inserted for the first
-          read to a page or burst memory.
-        minimum: 0
-        maximum: 255
-
-      qcom,xmem-write-wait-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The number of wait cycles for every write access.
-        minimum: 0
-        maximum: 15
-
-      qcom,xmem-read-wait-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The number of wait cycles for every read access.
-        minimum: 0
-        maximum: 15
-
-
-      # FAST chip selects
-      qcom,xmem-address-hold-enable:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          Holds the address for an extra cycle to meet hold time
-          requirements with ADV assertion, when set to 1.
-        enum: [ 0, 1 ]
-
-      qcom,xmem-adv-to-oe-recovery-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The number of cycles elapsed before an OE assertion, with
-          respect to the cycle where ADV (address valid) is asserted.
-        minimum: 0
-        maximum: 3
-
-      qcom,xmem-read-hold-cycles:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: >
-          The length in cycles of the first segment of a read transfer.
-          For a single read transfer this will be the time from CS
-          assertion to OE assertion.
-        minimum: 0
-        maximum: 15
-
-    required:
-      - reg
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
new file mode 100644
index 000000000000..c474f90846e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral Properties for Samsung Exynos SoC SROM Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  samsung,srom-page-mode:
+    description:
+      If page mode is set, 4 data page mode will be configured,
+      else normal (1 data) page mode will be set.
+    type: boolean
+
+  samsung,srom-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description: |
+      Array of 6 integers, specifying bank timings in the following order:
+      Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+      Each value is specified in cycles and has the following meaning
+      and valid range:
+      Tacp: Page mode access cycle at Page mode (0 - 15)
+      Tcah: Address holding time after CSn (0 - 15)
+      Tcoh: Chip selection hold on OEn (0 - 15)
+      Tacc: Access cycle (0 - 31, the actual time is N + 1)
+      Tcos: Chip selection set-up before OEn (0 - 15)
+      Tacs: Address set-up before CSn (0 - 15)
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
index f86667cbcca8..42279ae8c2b9 100644
--- a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
+++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -89,10 +90,7 @@ required:
   - reg
   - interrupts
 
-# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
-# "gpmc,*", ...) to be found, that actually depend on the compatible value of
-# the parent node.
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.yaml b/Documentation/devicetree/bindings/pps/pps-gpio.yaml
index fd4adfa8d2d4..383a838744eb 100644
--- a/Documentation/devicetree/bindings/pps/pps-gpio.yaml
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.yaml
@@ -36,14 +36,14 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/gpio/gpio.h>
-
-      pps {
-          compatible = "pps-gpio";
-          pinctrl-names = "default";
-          pinctrl-0 = <&pinctrl_pps>;
-          gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-          assert-falling-edge;
-          echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-          echo-active-ms = <100>;
-      };
+    #include <dt-bindings/gpio/gpio.h>
+
+    pps {
+        compatible = "pps-gpio";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pps>;
+        gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+        assert-falling-edge;
+        echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+        echo-active-ms = <100>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
index 80d99861fec5..70a4af650110 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
@@ -22,6 +22,9 @@ select:
   required:
     - compatible
 
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
 properties:
   compatible:
     items:
@@ -35,7 +38,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
index a64f21a5f299..f3e23e69a638 100644
--- a/Documentation/devicetree/bindings/submitting-patches.rst
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -54,11 +54,22 @@ I. For patch submitters
      followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
      ("checkpatch: add DT compatible string documentation checks"). ]
 
-  7) If a documented compatible string is not yet matched by the
+  7) DTS is treated in general as driver-independent hardware description, thus
+     any DTS patches, regardless whether using existing or new bindings, should
+     be placed at the end of patchset to indicate no dependency of drivers on
+     the DTS.  DTS will be anyway applied through separate tree or branch, so
+     different order would indicate the serie is non-bisectable.
+
+     If a driver subsystem maintainer prefers to apply entire set, instead of
+     their relevant portion of patchset, please split the DTS patches into
+     separate patchset with a reference in changelog or cover letter to the
+     bindings submission on the mailing list.
+
+  8) If a documented compatible string is not yet matched by the
      driver, the documentation should also include a compatible
      string that is matched by the driver.
 
-  8) Bindings are actively used by multiple projects other than the Linux
+  9) Bindings are actively used by multiple projects other than the Linux
      Kernel, extra care and consideration may need to be taken when making changes
      to existing bindings.
 
@@ -79,6 +90,10 @@ II. For kernel maintainers
   3) For a series going though multiple trees, the binding patch should be
      kept with the driver using the binding.
 
+  4) The DTS files should however never be applied via driver subsystem tree,
+     but always via platform SoC trees on dedicated branches (see also
+     Documentation/process/maintainer-soc.rst).
+
 III. Notes
 ==========
 
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 30e8f89fa032..8704b0dfc9c0 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -185,6 +185,12 @@ properties:
           - maxim,max5484
             # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
           - maxim,max6621
+            # InTune Automatically Compensated Digital PoL Controller with Driver and PMBus Telemetry
+          - maxim,max15301
+            # 6A InTune Automatically Compensated Converter with PMBus Telemetry
+          - maxim,max15303
+            # Multiphase Master with PMBus Interface and Internal Buck Converter
+          - maxim,max20751
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
             # Measurement Specialities I2C temperature and humidity sensor
@@ -382,6 +388,8 @@ properties:
           - ti,tps53676
             # TI Dual channel DCAP+ multiphase controller TPS53679
           - ti,tps53679
+            # TI Dual channel DCAP+ multiphase controller TPS53681
+          - ti,tps53681
             # TI Dual channel DCAP+ multiphase controller TPS53688
           - ti,tps53688
             # TI DC-DC converters on PMBus
@@ -389,6 +397,7 @@ properties:
           - ti,tps544b25
           - ti,tps544c20
           - ti,tps544c25
+          - ti,tps546b24
           - ti,tps546d24
             # I2C Touch-Screen Controller
           - ti,tsc2003
diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt
index 28199b31fe5e..0ee9de99b3ae 100644
--- a/Documentation/devicetree/bindings/xilinx.txt
+++ b/Documentation/devicetree/bindings/xilinx.txt
@@ -102,15 +102,6 @@
                                            Default is <d#1024 d#480>.
        - rotate-display (empty) : rotate display 180 degrees.
 
-      ii) Xilinx SystemACE
-
-      The Xilinx SystemACE device is used to program FPGAs from an FPGA
-      bitstream stored on a CF card.  It can also be used as a generic CF
-      interface device.
-
-      Optional properties:
-       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
       iii) Xilinx EMAC and Xilinx TEMAC
 
       Xilinx Ethernet devices.  In addition to general xilinx properties
@@ -118,13 +109,6 @@
       property, and may include other common network device properties
       like local-mac-address.
 
-      iv) Xilinx Uartlite
-
-      Xilinx uartlite devices are simple fixed speed serial ports.
-
-      Required properties:
-       - current-speed : Baud rate of uartlite
-
       v) Xilinx hwicap
 
 		Xilinx hwicap devices provide access to the configuration logic
@@ -141,16 +125,6 @@
 		- compatible : should contain "xlnx,xps-hwicap-1.00.a" or
 				"xlnx,opb-hwicap-1.00.b".
 
-      vi) Xilinx Uart 16550
-
-      Xilinx UART 16550 devices are very similar to the NS16550 but with
-      different register spacing and an offset from the base address.
-
-      Required properties:
-       - clock-frequency : Frequency of the clock input
-       - reg-offset : A value of 3 is required
-       - reg-shift : A value of 2 is required
-
       vii) Xilinx USB Host controller
 
       The Xilinx USB host controller is EHCI compatible but with a different
diff --git a/Documentation/process/maintainer-soc-clean-dts.rst b/Documentation/process/maintainer-soc-clean-dts.rst
index 1b32430d0cfc..5423fb7d6047 100644
--- a/Documentation/process/maintainer-soc-clean-dts.rst
+++ b/Documentation/process/maintainer-soc-clean-dts.rst
@@ -17,8 +17,9 @@ Strict DTS DT Schema and dtc Compliance
 No changes to the SoC platform Devicetree sources (DTS files) should introduce
 new ``make dtbs_check W=1`` warnings.  Warnings in a new board DTS, which are
 results of issues in an included DTSI file, are considered existing, not new
-warnings.  The platform maintainers have automation in place which should point
-out any new warnings.
+warnings.  For series split between different trees (DT bindings go via driver
+subsystem tree), warnings on linux-next are decisive.  The platform maintainers
+have automation in place which should point out any new warnings.
 
 If a commit introducing new warnings gets accepted somehow, the resulting
 issues shall be fixed in reasonable time (e.g. within one release) or the
diff --git a/MAINTAINERS b/MAINTAINERS
index 85061326dcb0..407c4586f352 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3148,6 +3148,11 @@ M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA EDAC BINDINGS
+M:	Matthew Gerlach <matthew.gerlach@altera.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
+
 ARM/SOCFPGA EDAC SUPPORT
 M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
diff --git a/drivers/of/address.c b/drivers/of/address.c
index d177a2b9edaf..f0f8f0dd191c 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -1031,20 +1031,15 @@ EXPORT_SYMBOL_GPL(of_dma_is_coherent);
  *
  * Returns true if the "nonposted-mmio" property was found for
  * the device's bus.
- *
- * This is currently only enabled on builds that support Apple ARM devices, as
- * an optimization.
  */
 static bool of_mmio_is_nonposted(const struct device_node *np)
 {
-	if (!IS_ENABLED(CONFIG_ARCH_APPLE))
-		return false;
-
 	struct device_node *parent __free(device_node) = of_get_parent(np);
-	if (!parent)
-		return false;
 
-	return of_property_read_bool(parent, "nonposted-mmio");
+	if (of_property_read_bool(np, "nonposted-mmio"))
+		return true;
+
+	return parent && of_property_read_bool(parent, "nonposted-mmio");
 }
 
 static int __of_address_to_resource(struct device_node *dev, int index, int bar_no,
diff --git a/drivers/of/base.c b/drivers/of/base.c
index e37b088f1fad..7043acd971a0 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1678,7 +1678,7 @@ int __of_add_property(struct device_node *np, struct property *prop)
 	prop->next = NULL;
 	next = &np->properties;
 	while (*next) {
-		if (strcmp(prop->name, (*next)->name) == 0) {
+		if (of_prop_cmp(prop->name, (*next)->name) == 0) {
 			/* duplicate ! don't insert it */
 			rc = -EEXIST;
 			goto out_unlock;
@@ -1882,9 +1882,7 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
 		int id, len;
 
 		/* Skip those we do not want to proceed */
-		if (!strcmp(pp->name, "name") ||
-		    !strcmp(pp->name, "phandle") ||
-		    !strcmp(pp->name, "linux,phandle"))
+		if (is_pseudo_property(pp->name))
 			continue;
 
 		np = of_find_node_by_path(pp->value);
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6c843d54ebb1..f8ad79b9b1c9 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -16,6 +16,7 @@
 
 #define pr_fmt(fmt)	"OF: " fmt
 
+#include <linux/cleanup.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/list.h>
@@ -38,11 +39,15 @@
 unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 {
 	struct of_phandle_args oirq;
+	unsigned int ret;
 
 	if (of_irq_parse_one(dev, index, &oirq))
 		return 0;
 
-	return irq_create_of_mapping(&oirq);
+	ret = irq_create_of_mapping(&oirq);
+	of_node_put(oirq.np);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
@@ -50,8 +55,8 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
  * of_irq_find_parent - Given a device node, find its interrupt parent node
  * @child: pointer to device node
  *
- * Return: A pointer to the interrupt parent node, or NULL if the interrupt
- * parent could not be determined.
+ * Return: A pointer to the interrupt parent node with refcount increased
+ * or NULL if the interrupt parent could not be determined.
  */
 struct device_node *of_irq_find_parent(struct device_node *child)
 {
@@ -165,6 +170,8 @@ const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, struct of_ph
  * the specifier for each map, and then returns the translated map.
  *
  * Return: 0 on success and a negative number on error
+ *
+ * Note: refcount of node @out_irq->np is increased by 1 on success.
  */
 int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 {
@@ -310,6 +317,12 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 		addrsize = (imap - match_array) - intsize;
 
 		if (ipar == newpar) {
+			/*
+			 * We got @ipar's refcount, but the refcount was
+			 * gotten again by of_irq_parse_imap_parent() via its
+			 * alias @newpar.
+			 */
+			of_node_put(ipar);
 			pr_debug("%pOF interrupt-map entry to self\n", ipar);
 			return 0;
 		}
@@ -339,10 +352,12 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw);
  * This function resolves an interrupt for a node by walking the interrupt tree,
  * finding which interrupt controller node it is attached to, and returning the
  * interrupt specifier that can be used to retrieve a Linux IRQ number.
+ *
+ * Note: refcount of node @out_irq->np is increased by 1 on success.
  */
 int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq)
 {
-	struct device_node *p;
+	struct device_node __free(device_node) *p = NULL;
 	const __be32 *addr;
 	u32 intsize;
 	int i, res, addr_len;
@@ -367,41 +382,33 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar
 	/* Try the new-style interrupts-extended first */
 	res = of_parse_phandle_with_args(device, "interrupts-extended",
 					"#interrupt-cells", index, out_irq);
-	if (!res)
-		return of_irq_parse_raw(addr_buf, out_irq);
-
-	/* Look for the interrupt parent. */
-	p = of_irq_find_parent(device);
-	if (p == NULL)
-		return -EINVAL;
+	if (!res) {
+		p = out_irq->np;
+	} else {
+		/* Look for the interrupt parent. */
+		p = of_irq_find_parent(device);
+		/* Get size of interrupt specifier */
+		if (!p || of_property_read_u32(p, "#interrupt-cells", &intsize))
+			return -EINVAL;
+
+		pr_debug(" parent=%pOF, intsize=%d\n", p, intsize);
+
+		/* Copy intspec into irq structure */
+		out_irq->np = p;
+		out_irq->args_count = intsize;
+		for (i = 0; i < intsize; i++) {
+			res = of_property_read_u32_index(device, "interrupts",
+							(index * intsize) + i,
+							out_irq->args + i);
+			if (res)
+				return res;
+		}
 
-	/* Get size of interrupt specifier */
-	if (of_property_read_u32(p, "#interrupt-cells", &intsize)) {
-		res = -EINVAL;
-		goto out;
+		pr_debug(" intspec=%d\n", *out_irq->args);
 	}
 
-	pr_debug(" parent=%pOF, intsize=%d\n", p, intsize);
-
-	/* Copy intspec into irq structure */
-	out_irq->np = p;
-	out_irq->args_count = intsize;
-	for (i = 0; i < intsize; i++) {
-		res = of_property_read_u32_index(device, "interrupts",
-						 (index * intsize) + i,
-						 out_irq->args + i);
-		if (res)
-			goto out;
-	}
-
-	pr_debug(" intspec=%d\n", *out_irq->args);
-
-
 	/* Check if there are any interrupt-map translations to process */
-	res = of_irq_parse_raw(addr_buf, out_irq);
- out:
-	of_node_put(p);
-	return res;
+	return of_irq_parse_raw(addr_buf, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_one);
 
@@ -505,8 +512,10 @@ int of_irq_count(struct device_node *dev)
 	struct of_phandle_args irq;
 	int nr = 0;
 
-	while (of_irq_parse_one(dev, nr, &irq) == 0)
+	while (of_irq_parse_one(dev, nr, &irq) == 0) {
+		of_node_put(irq.np);
 		nr++;
+	}
 
 	return nr;
 }
@@ -623,6 +632,8 @@ void __init of_irq_init(const struct of_device_id *matches)
 				       __func__, desc->dev, desc->dev,
 				       desc->interrupt_parent);
 				of_node_clear_flag(desc->dev, OF_POPULATED);
+				of_node_put(desc->interrupt_parent);
+				of_node_put(desc->dev);
 				kfree(desc);
 				continue;
 			}
@@ -653,6 +664,7 @@ void __init of_irq_init(const struct of_device_id *matches)
 err:
 	list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
 		list_del(&desc->list);
+		of_node_put(desc->interrupt_parent);
 		of_node_put(desc->dev);
 		kfree(desc);
 	}
diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h
index 1bdc7ceef3c5..df0bb00349e0 100644
--- a/drivers/of/of_private.h
+++ b/drivers/of/of_private.h
@@ -208,6 +208,13 @@ static void __maybe_unused of_dump_addr(const char *s, const __be32 *addr, int n
 static void __maybe_unused of_dump_addr(const char *s, const __be32 *addr, int na) { }
 #endif
 
+static inline bool is_pseudo_property(const char *prop_name)
+{
+	return !of_prop_cmp(prop_name, "name") ||
+		!of_prop_cmp(prop_name, "phandle") ||
+		!of_prop_cmp(prop_name, "linux,phandle");
+}
+
 #if IS_ENABLED(CONFIG_KUNIT)
 int __of_address_resource_bounds(struct resource *r, u64 start, u64 size);
 #endif
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 434f6dd6a86c..1af6f52d0708 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -84,6 +84,12 @@ static int devicetree_state_flags;
 #define DTSF_APPLY_FAIL		0x01
 #define DTSF_REVERT_FAIL	0x02
 
+static int of_prop_val_eq(const struct property *p1, const struct property *p2)
+{
+	return p1->length == p2->length &&
+	       !memcmp(p1->value, p2->value, (size_t)p1->length);
+}
+
 /*
  * If a changeset apply or revert encounters an error, an attempt will
  * be made to undo partial changes, but may fail.  If the undo fails
@@ -304,9 +310,7 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
 	int ret = 0;
 
 	if (target->in_livetree)
-		if (!of_prop_cmp(overlay_prop->name, "name") ||
-		    !of_prop_cmp(overlay_prop->name, "phandle") ||
-		    !of_prop_cmp(overlay_prop->name, "linux,phandle"))
+		if (is_pseudo_property(overlay_prop->name))
 			return 0;
 
 	if (target->in_livetree)
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index c6d8afb284e8..f77cb19973a5 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -334,7 +334,7 @@ static int of_platform_bus_create(struct device_node *bus,
 	int rc = 0;
 
 	/* Make sure it has a compatible property */
-	if (strict && (!of_get_property(bus, "compatible", NULL))) {
+	if (strict && (!of_property_present(bus, "compatible"))) {
 		pr_debug("%s() - skipping %pOF, no compatible prop\n",
 			 __func__, bus);
 		return 0;
@@ -536,8 +536,8 @@ static int __init of_platform_default_populate_init(void)
 		 * ignore errors for the rest.
 		 */
 		for_each_node_by_type(node, "display") {
-			if (!of_get_property(node, "linux,opened", NULL) ||
-			    !of_get_property(node, "linux,boot-display", NULL))
+			if (!of_property_read_bool(node, "linux,opened") ||
+			    !of_property_read_bool(node, "linux,boot-display"))
 				continue;
 			dev = of_platform_device_create(node, "of-display", NULL);
 			of_node_put(node);
@@ -551,7 +551,7 @@ static int __init of_platform_default_populate_init(void)
 			char buf[14];
 			const char *of_display_format = "of-display.%d";
 
-			if (!of_get_property(node, "linux,opened", NULL) || node == boot_display)
+			if (!of_property_read_bool(node, "linux,opened") || node == boot_display)
 				continue;
 			ret = snprintf(buf, sizeof(buf), of_display_format, display_number++);
 			if (ret < sizeof(buf))
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 779db058c42f..86424e145919 100644
--- a/drivers/of/resolver.c
+++ b/drivers/of/resolver.c
@@ -161,9 +161,7 @@ static int adjust_local_phandle_references(const struct device_node *local_fixup
 	for_each_property_of_node(local_fixups, prop_fix) {
 
 		/* skip properties added automatically */
-		if (!of_prop_cmp(prop_fix->name, "name") ||
-		    !of_prop_cmp(prop_fix->name, "phandle") ||
-		    !of_prop_cmp(prop_fix->name, "linux,phandle"))
+		if (is_pseudo_property(prop_fix->name))
 			continue;
 
 		if ((prop_fix->length % 4) != 0 || prop_fix->length == 0)
@@ -249,25 +247,22 @@ static int adjust_local_phandle_references(const struct device_node *local_fixup
  */
 int of_resolve_phandles(struct device_node *overlay)
 {
-	struct device_node *child, *local_fixups, *refnode;
-	struct device_node *tree_symbols, *overlay_fixups;
+	struct device_node *child, *refnode;
+	struct device_node *overlay_fixups;
+	struct device_node __free(device_node) *local_fixups = NULL;
 	struct property *prop;
 	const char *refpath;
 	phandle phandle, phandle_delta;
 	int err;
 
-	tree_symbols = NULL;
-
 	if (!overlay) {
 		pr_err("null overlay\n");
-		err = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	if (!of_node_check_flag(overlay, OF_DETACHED)) {
 		pr_err("overlay not detached\n");
-		err = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	phandle_delta = live_tree_max_phandle() + 1;
@@ -279,7 +274,7 @@ int of_resolve_phandles(struct device_node *overlay)
 
 	err = adjust_local_phandle_references(local_fixups, overlay, phandle_delta);
 	if (err)
-		goto out;
+		return err;
 
 	overlay_fixups = NULL;
 
@@ -288,16 +283,13 @@ int of_resolve_phandles(struct device_node *overlay)
 			overlay_fixups = child;
 	}
 
-	if (!overlay_fixups) {
-		err = 0;
-		goto out;
-	}
+	if (!overlay_fixups)
+		return 0;
 
-	tree_symbols = of_find_node_by_path("/__symbols__");
+	struct device_node __free(device_node) *tree_symbols = of_find_node_by_path("/__symbols__");
 	if (!tree_symbols) {
 		pr_err("no symbols in root of device tree.\n");
-		err = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	for_each_property_of_node(overlay_fixups, prop) {
@@ -311,14 +303,12 @@ int of_resolve_phandles(struct device_node *overlay)
 		if (err) {
 			pr_err("node label '%s' not found in live devicetree symbols table\n",
 			       prop->name);
-			goto out;
+			return err;
 		}
 
 		refnode = of_find_node_by_path(refpath);
-		if (!refnode) {
-			err = -ENOENT;
-			goto out;
-		}
+		if (!refnode)
+			return -ENOENT;
 
 		phandle = refnode->phandle;
 		of_node_put(refnode);
@@ -328,11 +318,8 @@ int of_resolve_phandles(struct device_node *overlay)
 			break;
 	}
 
-out:
 	if (err)
 		pr_err("overlay phandle fixup failed: %d\n", err);
-	of_node_put(tree_symbols);
-
 	return err;
 }
 EXPORT_SYMBOL_GPL(of_resolve_phandles);
diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi
index 7c9f31cc131b..4ccb54f91c30 100644
--- a/drivers/of/unittest-data/tests-interrupts.dtsi
+++ b/drivers/of/unittest-data/tests-interrupts.dtsi
@@ -50,6 +50,13 @@
 				interrupt-map = <0x5000 1 2 &test_intc0 15>;
 			};
 
+			test_intc_intmap0: intc-intmap0 {
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				interrupt-controller;
+				interrupt-map = <0x6000 1 &test_intc_intmap0 0x7000 2>;
+			};
+
 			interrupts0 {
 				interrupt-parent = <&test_intc0>;
 				interrupts = <1>, <2>, <3>, <4>;
@@ -60,6 +67,12 @@
 				interrupts = <1>, <2>, <3>, <4>;
 			};
 
+			interrupts2 {
+				reg = <0x6000 0x100>;
+				interrupt-parent = <&test_intc_intmap0>;
+				interrupts = <1>;
+			};
+
 			interrupts-extended0 {
 				reg = <0x5000 0x100>;
 				/*
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index f88ddb1cf5d7..64d301893af7 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1654,6 +1654,72 @@ static void __init of_unittest_parse_interrupts_extended(void)
 	of_node_put(np);
 }
 
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static void __init of_unittest_irq_refcount(void)
+{
+	struct of_phandle_args args;
+	struct device_node *intc0, *int_ext0;
+	struct device_node *int2, *intc_intmap0;
+	unsigned int ref_c0, ref_c1, ref_c2;
+	int rc;
+	bool passed;
+
+	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
+		return;
+
+	intc0 = of_find_node_by_path("/testcase-data/interrupts/intc0");
+	int_ext0 = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0");
+	intc_intmap0 = of_find_node_by_path("/testcase-data/interrupts/intc-intmap0");
+	int2 = of_find_node_by_path("/testcase-data/interrupts/interrupts2");
+	if (!intc0 || !int_ext0 || !intc_intmap0 || !int2) {
+		pr_err("missing testcase data\n");
+		goto out;
+	}
+
+	/* Test refcount for API of_irq_parse_one() */
+	passed = true;
+	ref_c0 = OF_KREF_READ(intc0);
+	ref_c1 = ref_c0 + 1;
+	memset(&args, 0, sizeof(args));
+	rc = of_irq_parse_one(int_ext0, 0, &args);
+	ref_c2 = OF_KREF_READ(intc0);
+	of_node_put(args.np);
+
+	passed &= !rc;
+	passed &= (args.np == intc0);
+	passed &= (args.args_count == 1);
+	passed &= (args.args[0] == 1);
+	passed &= (ref_c1 == ref_c2);
+	unittest(passed, "IRQ refcount case #1 failed, original(%u) expected(%u) got(%u)\n",
+		 ref_c0, ref_c1, ref_c2);
+
+	/* Test refcount for API of_irq_parse_raw() */
+	passed = true;
+	ref_c0 = OF_KREF_READ(intc_intmap0);
+	ref_c1 = ref_c0 + 1;
+	memset(&args, 0, sizeof(args));
+	rc = of_irq_parse_one(int2, 0, &args);
+	ref_c2 = OF_KREF_READ(intc_intmap0);
+	of_node_put(args.np);
+
+	passed &= !rc;
+	passed &= (args.np == intc_intmap0);
+	passed &= (args.args_count == 1);
+	passed &= (args.args[0] == 2);
+	passed &= (ref_c1 == ref_c2);
+	unittest(passed, "IRQ refcount case #2 failed, original(%u) expected(%u) got(%u)\n",
+		 ref_c0, ref_c1, ref_c2);
+
+out:
+	of_node_put(int2);
+	of_node_put(intc_intmap0);
+	of_node_put(int_ext0);
+	of_node_put(intc0);
+}
+#else
+static inline void __init of_unittest_irq_refcount(void) { }
+#endif
+
 static const struct of_device_id match_node_table[] = {
 	{ .data = "A", .name = "name0", }, /* Name alone is lowest priority */
 	{ .data = "B", .type = "type1", }, /* followed by type alone */
@@ -4324,6 +4390,7 @@ static int __init of_unittest(void)
 	of_unittest_changeset_prop();
 	of_unittest_parse_interrupts();
 	of_unittest_parse_interrupts_extended();
+	of_unittest_irq_refcount();
 	of_unittest_dma_get_max_cpu_address();
 	of_unittest_parse_dma_ranges();
 	of_unittest_pci_dma_ranges();
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index 0731994b9d7c..6fa0a268d538 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -91,7 +91,7 @@ struct fwnode_endpoint {
 #define SWNODE_GRAPH_PORT_NAME_FMT		"port@%u"
 #define SWNODE_GRAPH_ENDPOINT_NAME_FMT		"endpoint@%u"
 
-#define NR_FWNODE_REFERENCE_ARGS	8
+#define NR_FWNODE_REFERENCE_ARGS	16
 
 /**
  * struct fwnode_reference_args - Fwnode reference with additional arguments
diff --git a/include/linux/of.h b/include/linux/of.h
index dbd022d1cdc0..a62154aeda1b 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -67,7 +67,7 @@ struct device_node {
 #endif
 };
 
-#define MAX_PHANDLE_ARGS 16
+#define MAX_PHANDLE_ARGS NR_FWNODE_REFERENCE_ARGS
 struct of_phandle_args {
 	struct device_node *np;
 	int args_count;
@@ -926,12 +926,6 @@ static inline const void *of_device_get_match_data(const struct device *dev)
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 #endif
 
-static inline int of_prop_val_eq(const struct property *p1, const struct property *p2)
-{
-	return p1->length == p2->length &&
-	       !memcmp(p1->value, p2->value, (size_t)p1->length);
-}
-
 #define for_each_property_of_node(dn, pp) \
 	for (pp = dn->properties; pp != NULL; pp = pp->next)
 
diff --git a/scripts/make_fit.py b/scripts/make_fit.py
index 4a1bb2f55861..1683e5ec6e67 100755
--- a/scripts/make_fit.py
+++ b/scripts/make_fit.py
@@ -279,7 +279,11 @@ def build_fit(args):
         if os.path.splitext(fname)[1] != '.dtb':
             continue
 
-        (model, compat, files) = process_dtb(fname, args)
+        try:
+            (model, compat, files) = process_dtb(fname, args)
+        except Exception as e:
+            sys.stderr.write(f"Error processing {fname}:\n")
+            raise e
 
         for fn in files:
             if fn not in fdts: