diff options
| author | Apurva Nandan <a-nandan@ti.com> | 2023-08-12 00:50:30 +0530 |
|---|---|---|
| committer | Nishanth Menon <nm@ti.com> | 2023-08-11 15:54:18 -0500 |
| commit | 68501d3cc16a7828b05ee24bdb037f697e207854 (patch) | |
| tree | 314b75293d65b785e6d675bf6ebc9944c83e9894 | |
| parent | c74d8de338a553da7b0084bab2554b042375625e (diff) | |
arm64: dts: ti: k3-am69-sk: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.
wkup_i2c0, mcu_uart0, main_uart8, main_sdhci0 and main_sdhci1 are required
for bootloader operation on TI K3 AM69-SK EVM. These IPs along with
pinmuxes need to be marked for all bootloader phases, hence add bootph-all
to these nodes in kernel dts.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-4-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am69-sk.dts | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index d282c2c633c1..06993709111e 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -110,7 +110,9 @@ }; &main_pmx0 { + bootph-all; main_uart8_pins_default: main-uart8-default-pins { + bootph-all; pinctrl-single,pins = < J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ @@ -125,6 +127,7 @@ }; main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; pinctrl-single,pins = < J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ @@ -164,7 +167,9 @@ }; &wkup_pmx2 { + bootph-all; wkup_uart0_pins_default: wkup-uart0-default-pins { + bootph-all; pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ @@ -174,6 +179,7 @@ }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ @@ -181,6 +187,7 @@ }; mcu_uart0_pins_default: mcu-uart0-default-pins { + bootph-all; pinctrl-single,pins = < J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */ J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */ @@ -249,6 +256,7 @@ }; &wkup_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; @@ -268,6 +276,7 @@ }; &mcu_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; @@ -281,6 +290,7 @@ }; &main_uart8 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart8_pins_default>; @@ -307,6 +317,7 @@ }; &main_sdhci0 { + bootph-all; /* eMMC */ status = "okay"; non-removable; @@ -315,6 +326,7 @@ }; &main_sdhci1 { + bootph-all; /* SD card */ status = "okay"; pinctrl-0 = <&main_mmc1_pins_default>; |