diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2025-09-23 22:02:44 +0800 |
|---|---|---|
| committer | Chen-Yu Tsai <wens@csie.org> | 2025-10-13 15:52:14 +0800 |
| commit | 7076938d20d22d5f75641f417f11edeee192e3cf (patch) | |
| tree | 402eb0cf5bf47aade3874d55b73f18085b3f2cef | |
| parent | 460a71b5642a60574809032f0a21afff0f942474 (diff) | |
arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port
On the Radxa Cubie A5E board, the second Ethernet controller, aka the
GMAC200, is connected to a second external Maxio MAE0621A PHY. The PHY
uses an external 25MHz crystal, and has the SoC's PJ16 pin connected to
its reset pin.
Enable the second Ethernet port. Also fix up the label for the existing
external PHY connected to the first Ethernet port. An enable delay for the
PHY supply regulator is added to make sure the PHY's internal regulators
are fully powered and the PHY is operational.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250923140247.2622602-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts | 28 |
1 files changed, 26 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts index f82a8d121697..bfdf1728cd14 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -14,6 +14,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; }; @@ -75,7 +76,7 @@ &gmac0 { phy-mode = "rgmii-id"; - phy-handle = <&ext_rgmii_phy>; + phy-handle = <&ext_rgmii0_phy>; phy-supply = <®_cldo3>; allwinner,tx-delay-ps = <300>; @@ -84,13 +85,24 @@ status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii1_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <300>; + rx-internal-delay-ps = <400>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; &mdio0 { - ext_rgmii_phy: ethernet-phy@1 { + ext_rgmii0_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ @@ -99,6 +111,16 @@ }; }; +&mdio1 { + ext_rgmii1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ @@ -250,6 +272,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-pj-phy"; + /* enough time for the PHY to fully power on */ + regulator-enable-ramp-delay = <150000>; }; reg_cpusldo: cpusldo { |