Merge tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx into arm/dt

arm64: ZynqMP SOC changes for v6.3

- Fix node names to be aligned with dt schema
- Rename DT overlay files to dtso
- Add snps,resume-hs-terminations to usb nodes
- Describe gpio-modepin node
- Use xlnx prefix for ethernet IP

* tag 'zynqmp-dt-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Add xlnx prefix to GEM compatible string
  arm64: dts: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsi
  arm64: dts: zynqmp: Add mode-pin GPIO controller DT node
  arm64: zynqmp: Enable hs termination flag for USB dwc3 controller
  arm64: dts: xilinx: Rename DTB overlay source files from .dts to .dtso
  arm64: xilinx: Fix opp-table-cpu
  arm64: dts: xilinx: align LED node names with dtschema

Link: https://lore.kernel.org/r/89d82a7e-6b42-97ce-2912-aa7dec965ff2@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 20 insertions, 14 deletions

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index e172fa05c9a0..3e9979ab60bb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -135,28 +135,24 @@
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
 		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem1 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
 		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem2 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
 		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gem3 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
 		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
 		 <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 };
 
 &gpio {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index b610e65e0cdf..b610e65e0cdf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a52dafbfd59e..a52dafbfd59e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d61a297a2090..6948fd40554b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -86,7 +86,7 @@
 			linux,default-trigger = "bluetooth-power";
 		};
 
-		vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
+		led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
 			label = "vbus_det";
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 4325cb8526ed..153db59dc4b3 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -13,6 +13,7 @@
  */
 
 #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/xlnx-zynqmp-power.h>
 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
@@ -75,7 +76,7 @@
 		};
 	};
 
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 		opp00 {
@@ -199,6 +200,12 @@
 				compatible = "xlnx,zynqmp-pinctrl";
 				status = "disabled";
 			};
+
+			modepin_gpio: gpio {
+				compatible = "xlnx,zynqmp-gpio-modepin";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
 		};
 	};
 
@@ -533,12 +540,12 @@
 		};
 
 		gem0: ethernet@ff0b0000 {
-			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			iommus = <&smmu 0x874>;
@@ -548,12 +555,12 @@
 		};
 
 		gem1: ethernet@ff0c0000 {
-			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			iommus = <&smmu 0x875>;
@@ -563,12 +570,12 @@
 		};
 
 		gem2: ethernet@ff0d0000 {
-			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			iommus = <&smmu 0x876>;
@@ -578,12 +585,12 @@
 		};
 
 		gem3: ethernet@ff0e0000 {
-			compatible = "cdns,zynqmp-gem", "cdns,gem";
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
-			clock-names = "pclk", "hclk", "tx_clk";
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			iommus = <&smmu 0x877>;
@@ -847,6 +854,7 @@
 				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
 				 <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
 			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
 			ranges;
 
 			dwc3_0: usb@fe200000 {
@@ -858,6 +866,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x860>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};
@@ -884,6 +893,7 @@
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x861>;
 				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
 				/* dma-coherent; */
 			};
 		};